Merge tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "These are the main pinctrl changes for the v3.9 merge window.  The
  most interesting change by far is how the device core grabs pinctrl
  default handles avoiding the need to stick boilerplate into driver
  consumers.

   - Grabbing of default pinctrl handles from the device core.  These
     are the hunks hitting drivers/base.  All is ACKed by Greg, after a
     long discussion about different alternatives.

   - Some stuff also touches the MFD and ARM SoC trees, this has been
     coordinated and ACKed.

   - New drivers for:
     - The Tegra 114 sub-SoC
     - Allwinner sunxi
     - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540
       and AB8540.

   - Make it possible for hogged pins to enter a sleep mode, and make it
     possible for drivers to control that mode.

   - Various clean-up, extensions and device tree support to various pin
     controllers."

* tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits)
  pinctrl: tegra: add clfvs function to Tegra114 support
  pinctrl: generic: rename input schmitt disable
  pinctrl/pinconfig: add debug interface
  pinctrl: samsung: remove duplicated line
  ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
  ARM: ux500: remove irq_base property from platform_data
  pinctrl/abx500: use direct IRQ defines
  pinctrl/abx500: replace IRQ offsets with table read-in values
  pinctrl/abx500: move IRQ handling to ab8500-core
  pinctrl: exynos5440: remove erroneous __init
  pinctrl/abx500: adjust offset for get_mode()
  pinctrl/abx500: add Device Tree support
  pinctrl/abx500: align GPIO cluster boundaries
  pinctrl/abx500: prevent error path from corrupting returning error
  pinctrl: sunxi: add of_xlate function
  pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
  pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
  pinctrl/lantiq: fix pinconfig parameters
  pinctrl/lantiq: one of the boot leds was defined incorrectly
  pinctrl/lantiq: only probe available pad controllers
  ...

4 files changed, 1 insertions, 528 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 682de754d63f..e5116fa85140 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -657,12 +657,6 @@ config GPIO_JANZ_TTL
 	  This driver provides support for driving the pins in output
 	  mode only. Input mode is not supported.
 
-config GPIO_AB8500
-	bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
-	depends on AB8500_CORE && BROKEN
-	help
-	  Select this to enable the AB8500 IC GPIO driver
-
 config GPIO_TPS6586X
 	bool "TPS6586X GPIO"
 	depends on MFD_TPS6586X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c5aebd008dde..45a388c21d04 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_GPIO_ACPI)		+= gpiolib-acpi.o
 obj-$(CONFIG_GPIO_GENERIC)	+= gpio-generic.o
 
 obj-$(CONFIG_GPIO_74X164)	+= gpio-74x164.o
-obj-$(CONFIG_GPIO_AB8500)	+= gpio-ab8500.o
 obj-$(CONFIG_GPIO_ADNP)		+= gpio-adnp.o
 obj-$(CONFIG_GPIO_ADP5520)	+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
diff --git a/drivers/gpio/gpio-ab8500.c b/drivers/gpio/gpio-ab8500.c
deleted file mode 100644
index 983ad425f0ac..000000000000
--- a/drivers/gpio/gpio-ab8500.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: BIBEK BASU <bibek.basu@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/ab8500.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500/gpio.h>
-
-/*
- * GPIO registers offset
- * Bank: 0x10
- */
-#define AB8500_GPIO_SEL1_REG	0x00
-#define AB8500_GPIO_SEL2_REG	0x01
-#define AB8500_GPIO_SEL3_REG	0x02
-#define AB8500_GPIO_SEL4_REG	0x03
-#define AB8500_GPIO_SEL5_REG	0x04
-#define AB8500_GPIO_SEL6_REG	0x05
-
-#define AB8500_GPIO_DIR1_REG	0x10
-#define AB8500_GPIO_DIR2_REG	0x11
-#define AB8500_GPIO_DIR3_REG	0x12
-#define AB8500_GPIO_DIR4_REG	0x13
-#define AB8500_GPIO_DIR5_REG	0x14
-#define AB8500_GPIO_DIR6_REG	0x15
-
-#define AB8500_GPIO_OUT1_REG	0x20
-#define AB8500_GPIO_OUT2_REG	0x21
-#define AB8500_GPIO_OUT3_REG	0x22
-#define AB8500_GPIO_OUT4_REG	0x23
-#define AB8500_GPIO_OUT5_REG	0x24
-#define AB8500_GPIO_OUT6_REG	0x25
-
-#define AB8500_GPIO_PUD1_REG	0x30
-#define AB8500_GPIO_PUD2_REG	0x31
-#define AB8500_GPIO_PUD3_REG	0x32
-#define AB8500_GPIO_PUD4_REG	0x33
-#define AB8500_GPIO_PUD5_REG	0x34
-#define AB8500_GPIO_PUD6_REG	0x35
-
-#define AB8500_GPIO_IN1_REG	0x40
-#define AB8500_GPIO_IN2_REG	0x41
-#define AB8500_GPIO_IN3_REG	0x42
-#define AB8500_GPIO_IN4_REG	0x43
-#define AB8500_GPIO_IN5_REG	0x44
-#define AB8500_GPIO_IN6_REG	0x45
-#define AB8500_GPIO_ALTFUN_REG	0x45
-#define ALTFUN_REG_INDEX	6
-#define AB8500_NUM_GPIO		42
-#define AB8500_NUM_VIR_GPIO_IRQ	16
-
-enum ab8500_gpio_action {
-	NONE,
-	STARTUP,
-	SHUTDOWN,
-	MASK,
-	UNMASK
-};
-
-struct ab8500_gpio {
-	struct gpio_chip chip;
-	struct ab8500 *parent;
-	struct device *dev;
-	struct mutex lock;
-	u32 irq_base;
-	enum ab8500_gpio_action irq_action;
-	u16 rising;
-	u16 falling;
-};
-/**
- * to_ab8500_gpio() - get the pointer to ab8500_gpio
- * @chip:	Member of the structure ab8500_gpio
- */
-static inline struct ab8500_gpio *to_ab8500_gpio(struct gpio_chip *chip)
-{
-	return container_of(chip, struct ab8500_gpio, chip);
-}
-
-static int ab8500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
-					unsigned offset, int val)
-{
-	struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
-	u8 pos = offset % 8;
-	int ret;
-
-	reg = reg + (offset / 8);
-	ret = abx500_mask_and_set_register_interruptible(ab8500_gpio->dev,
-				AB8500_MISC, reg, 1 << pos, val << pos);
-	if (ret < 0)
-		dev_err(ab8500_gpio->dev, "%s write failed\n", __func__);
-	return ret;
-}
-/**
- * ab8500_gpio_get() - Get the particular GPIO value
- * @chip: Gpio device
- * @offset: GPIO number to read
- */
-static int ab8500_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
-	u8 mask = 1 << (offset % 8);
-	u8 reg = AB8500_GPIO_OUT1_REG + (offset / 8);
-	int ret;
-	u8 data;
-	ret = abx500_get_register_interruptible(ab8500_gpio->dev, AB8500_MISC,
-						reg, &data);
-	if (ret < 0) {
-		dev_err(ab8500_gpio->dev, "%s read failed\n", __func__);
-		return ret;
-	}
-	return (data & mask) >> (offset % 8);
-}
-
-static void ab8500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
-	int ret;
-	/* Write the data */
-	ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, 1);
-	if (ret < 0)
-		dev_err(ab8500_gpio->dev, "%s write failed\n", __func__);
-}
-
-static int ab8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-					int val)
-{
-	int ret;
-	/* set direction as output */
-	ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1);
-	if (ret < 0)
-		return ret;
-	/* disable pull down */
-	ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1);
-	if (ret < 0)
-		return ret;
-	/* set the output as 1 or 0 */
-	return ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
-
-}
-
-static int ab8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	/* set the register as input */
-	return ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0);
-}
-
-static int ab8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	/*
-	 * Only some GPIOs are interrupt capable, and they are
-	 * organized in discontiguous clusters:
-	 *
-	 *	GPIO6 to GPIO13
-	 *	GPIO24 and GPIO25
-	 *	GPIO36 to GPIO41
-	 */
-	static struct ab8500_gpio_irq_cluster {
-		int start;
-		int end;
-	} clusters[] = {
-		{.start = 6,  .end = 13},
-		{.start = 24, .end = 25},
-		{.start = 36, .end = 41},
-	};
-	struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
-	int base = ab8500_gpio->irq_base;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(clusters); i++) {
-		struct ab8500_gpio_irq_cluster *cluster = &clusters[i];
-
-		if (offset >= cluster->start && offset <= cluster->end)
-			return base + offset - cluster->start;
-
-		/* Advance by the number of gpios in this cluster */
-		base += cluster->end - cluster->start + 1;
-	}
-
-	return -EINVAL;
-}
-
-static struct gpio_chip ab8500gpio_chip = {
-	.label			= "ab8500_gpio",
-	.owner			= THIS_MODULE,
-	.direction_input	= ab8500_gpio_direction_input,
-	.get			= ab8500_gpio_get,
-	.direction_output	= ab8500_gpio_direction_output,
-	.set			= ab8500_gpio_set,
-	.to_irq			= ab8500_gpio_to_irq,
-};
-
-static unsigned int irq_to_rising(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	int offset = irq - ab8500_gpio->irq_base;
-	int new_irq = offset +  AB8500_INT_GPIO6R
-			+ ab8500_gpio->parent->irq_base;
-	return new_irq;
-}
-
-static unsigned int irq_to_falling(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	int offset = irq - ab8500_gpio->irq_base;
-	int new_irq = offset +  AB8500_INT_GPIO6F
-			+  ab8500_gpio->parent->irq_base;
-	return new_irq;
-
-}
-
-static unsigned int rising_to_irq(unsigned int irq, void *dev)
-{
-	struct ab8500_gpio *ab8500_gpio = dev;
-	int offset = irq - AB8500_INT_GPIO6R
-			- ab8500_gpio->parent->irq_base ;
-	int new_irq = offset + ab8500_gpio->irq_base;
-	return new_irq;
-}
-
-static unsigned int falling_to_irq(unsigned int irq, void *dev)
-{
-	struct ab8500_gpio *ab8500_gpio = dev;
-	int offset = irq - AB8500_INT_GPIO6F
-			- ab8500_gpio->parent->irq_base ;
-	int new_irq = offset + ab8500_gpio->irq_base;
-	return new_irq;
-
-}
-
-/*
- * IRQ handler
- */
-
-static irqreturn_t handle_rising(int irq, void *dev)
-{
-
-	handle_nested_irq(rising_to_irq(irq , dev));
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t handle_falling(int irq, void *dev)
-{
-
-	handle_nested_irq(falling_to_irq(irq, dev));
-	return IRQ_HANDLED;
-}
-
-static void ab8500_gpio_irq_lock(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	mutex_lock(&ab8500_gpio->lock);
-}
-
-static void ab8500_gpio_irq_sync_unlock(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	int offset = irq - ab8500_gpio->irq_base;
-	bool rising = ab8500_gpio->rising & BIT(offset);
-	bool falling = ab8500_gpio->falling & BIT(offset);
-	int ret;
-
-	switch (ab8500_gpio->irq_action)	{
-	case STARTUP:
-		if (rising)
-			ret = request_threaded_irq(irq_to_rising(irq),
-					NULL, handle_rising,
-					IRQF_TRIGGER_RISING,
-					"ab8500-gpio-r", ab8500_gpio);
-		if (falling)
-			ret = request_threaded_irq(irq_to_falling(irq),
-				       NULL, handle_falling,
-				       IRQF_TRIGGER_FALLING,
-				       "ab8500-gpio-f", ab8500_gpio);
-		break;
-	case SHUTDOWN:
-		if (rising)
-			free_irq(irq_to_rising(irq), ab8500_gpio);
-		if (falling)
-			free_irq(irq_to_falling(irq), ab8500_gpio);
-		break;
-	case MASK:
-		if (rising)
-			disable_irq(irq_to_rising(irq));
-		if (falling)
-			disable_irq(irq_to_falling(irq));
-		break;
-	case UNMASK:
-		if (rising)
-			enable_irq(irq_to_rising(irq));
-		if (falling)
-			enable_irq(irq_to_falling(irq));
-		break;
-	case NONE:
-		break;
-	}
-	ab8500_gpio->irq_action = NONE;
-	ab8500_gpio->rising &= ~(BIT(offset));
-	ab8500_gpio->falling &= ~(BIT(offset));
-	mutex_unlock(&ab8500_gpio->lock);
-}
-
-
-static void ab8500_gpio_irq_mask(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	ab8500_gpio->irq_action = MASK;
-}
-
-static void ab8500_gpio_irq_unmask(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	ab8500_gpio->irq_action = UNMASK;
-}
-
-static int ab8500_gpio_irq_set_type(unsigned int irq, unsigned int type)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	int offset = irq - ab8500_gpio->irq_base;
-
-	if (type == IRQ_TYPE_EDGE_BOTH) {
-		ab8500_gpio->rising =  BIT(offset);
-		ab8500_gpio->falling = BIT(offset);
-	} else if (type == IRQ_TYPE_EDGE_RISING) {
-		ab8500_gpio->rising =  BIT(offset);
-	} else  {
-		ab8500_gpio->falling = BIT(offset);
-	}
-	return 0;
-}
-
-unsigned int ab8500_gpio_irq_startup(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	ab8500_gpio->irq_action = STARTUP;
-	return 0;
-}
-
-void ab8500_gpio_irq_shutdown(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	ab8500_gpio->irq_action = SHUTDOWN;
-}
-
-static struct irq_chip ab8500_gpio_irq_chip = {
-	.name			= "ab8500-gpio",
-	.startup		= ab8500_gpio_irq_startup,
-	.shutdown		= ab8500_gpio_irq_shutdown,
-	.bus_lock		= ab8500_gpio_irq_lock,
-	.bus_sync_unlock	= ab8500_gpio_irq_sync_unlock,
-	.mask			= ab8500_gpio_irq_mask,
-	.unmask			= ab8500_gpio_irq_unmask,
-	.set_type		= ab8500_gpio_irq_set_type,
-};
-
-static int ab8500_gpio_irq_init(struct ab8500_gpio *ab8500_gpio)
-{
-	u32 base = ab8500_gpio->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ ; irq++) {
-		set_irq_chip_data(irq, ab8500_gpio);
-		set_irq_chip_and_handler(irq, &ab8500_gpio_irq_chip,
-				handle_simple_irq);
-		set_irq_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, IRQF_VALID);
-#else
-		set_irq_noprobe(irq);
-#endif
-	}
-
-	return 0;
-}
-
-static void ab8500_gpio_irq_remove(struct ab8500_gpio *ab8500_gpio)
-{
-	int base = ab8500_gpio->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ; irq++) {
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, 0);
-#endif
-		set_irq_chip_and_handler(irq, NULL, NULL);
-		set_irq_chip_data(irq, NULL);
-	}
-}
-
-static int ab8500_gpio_probe(struct platform_device *pdev)
-{
-	struct ab8500_platform_data *ab8500_pdata =
-				dev_get_platdata(pdev->dev.parent);
-	struct ab8500_gpio_platform_data *pdata;
-	struct ab8500_gpio *ab8500_gpio;
-	int ret;
-	int i;
-
-	pdata = ab8500_pdata->gpio;
-	if (!pdata)	{
-		dev_err(&pdev->dev, "gpio platform data missing\n");
-		return -ENODEV;
-	}
-
-	ab8500_gpio = kzalloc(sizeof(struct ab8500_gpio), GFP_KERNEL);
-	if (ab8500_gpio == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-	ab8500_gpio->dev = &pdev->dev;
-	ab8500_gpio->parent = dev_get_drvdata(pdev->dev.parent);
-	ab8500_gpio->chip = ab8500gpio_chip;
-	ab8500_gpio->chip.ngpio = AB8500_NUM_GPIO;
-	ab8500_gpio->chip.dev = &pdev->dev;
-	ab8500_gpio->chip.base = pdata->gpio_base;
-	ab8500_gpio->irq_base = pdata->irq_base;
-	/* initialize the lock */
-	mutex_init(&ab8500_gpio->lock);
-	/*
-	 * AB8500 core will handle and clear the IRQ
-	 * configre GPIO based on config-reg value.
-	 * These values are for selecting the PINs as
-	 * GPIO or alternate function
-	 */
-	for (i = AB8500_GPIO_SEL1_REG; i <= AB8500_GPIO_SEL6_REG; i++)	{
-		ret = abx500_set_register_interruptible(ab8500_gpio->dev,
-				AB8500_MISC, i,
-				pdata->config_reg[i]);
-		if (ret < 0)
-			goto out_free;
-	}
-	ret = abx500_set_register_interruptible(ab8500_gpio->dev, AB8500_MISC,
-				AB8500_GPIO_ALTFUN_REG,
-				pdata->config_reg[ALTFUN_REG_INDEX]);
-	if (ret < 0)
-		goto out_free;
-
-	ret = ab8500_gpio_irq_init(ab8500_gpio);
-	if (ret)
-		goto out_free;
-	ret = gpiochip_add(&ab8500_gpio->chip);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to add gpiochip: %d\n",
-				ret);
-		goto out_rem_irq;
-	}
-	platform_set_drvdata(pdev, ab8500_gpio);
-	return 0;
-
-out_rem_irq:
-	ab8500_gpio_irq_remove(ab8500_gpio);
-out_free:
-	mutex_destroy(&ab8500_gpio->lock);
-	kfree(ab8500_gpio);
-	return ret;
-}
-
-/*
- * ab8500_gpio_remove() - remove Ab8500-gpio driver
- * @pdev :	Platform device registered
- */
-static int ab8500_gpio_remove(struct platform_device *pdev)
-{
-	struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = gpiochip_remove(&ab8500_gpio->chip);
-	if (ret < 0) {
-		dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n",
-			ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, NULL);
-	mutex_destroy(&ab8500_gpio->lock);
-	kfree(ab8500_gpio);
-
-	return 0;
-}
-
-static struct platform_driver ab8500_gpio_driver = {
-	.driver = {
-		.name = "ab8500-gpio",
-		.owner = THIS_MODULE,
-	},
-	.probe = ab8500_gpio_probe,
-	.remove = ab8500_gpio_remove,
-};
-
-static int __init ab8500_gpio_init(void)
-{
-	return platform_driver_register(&ab8500_gpio_driver);
-}
-arch_initcall(ab8500_gpio_init);
-
-static void __exit ab8500_gpio_exit(void)
-{
-	platform_driver_unregister(&ab8500_gpio_driver);
-}
-module_exit(ab8500_gpio_exit);
-
-MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>");
-MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO");
-MODULE_ALIAS("platform:ab8500-gpio");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index d542a141811a..25b1dbe8921d 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -250,7 +250,7 @@ static void of_gpiochip_add_pin_range(struct gpio_chip *chip)
 		 * on the same GPIO chip.
 		 */
 		ret = gpiochip_add_pin_range(chip,
-					     pinctrl_dev_get_name(pctldev),
+					     pinctrl_dev_get_devname(pctldev),
 					     0, /* offset in gpiochip */
 					     pinspec.args[0],
 					     pinspec.args[1]);