summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-07-06 11:38:59 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-07-06 11:38:59 -0700
commitac7b75966c9c86426b55fe1c50ae148aa4571075 (patch)
treecf57426162eb8ccf60f0452fc23a4b7d7c7175d5 /drivers/gpio
parent4f5dfdd29065a0d1d0e61d9744e14d1d852518be (diff)
parent3fa53ec2ed885b0aec3f0472e3b4a8a6f1cd748c (diff)
downloadlinux-ac7b75966c9c86426b55fe1c50ae148aa4571075.tar.bz2
Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij: "This is the big bulk of pin control changes for the v4.13 series: Core: - The documentation is moved over to RST. - We now have agreed bindings for enabling input and output buffers without actually enabling input and/or output on a pin. We are chiseling out some details of pin control electronics. New drivers: - ZTE ZX - Renesas RZA1 - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree to use this pin controller and consolidate earlier spread out code. - Microschip MCP23S08: this driver is migrated from the GPIO subsystem and totally rewritten to use proper pin control. All users are switched over. New subdrivers: - Renesas R8A7743 and R8A7745. - Allwinner Sunxi A83T R_PIO. - Marvell MVEBU Armada CP110 and AP806. - Intel Cannon Lake PCH. - Qualcomm IPQ8074. Notable improvements: - IRQ support on the Marvell MVEBU Armada 37xx. - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM. - Rockchip driver now supports iomux-route switching for RK3228, RK3328 and RK3399. - Rockchip A10 and A20 are merged into a single driver. - STM32 has improved GPIO support. - Samsung Exynos drivers are split per ARMv7 and ARMv8. - Marvell MVEBU is converted to use regmap for register access. Maintenance: - Several Renesas SH-PFC refactorings and updates. - Serious code size cut for Mediatek MT7623. - Misc janitorial and MAINTAINERS fixes" * tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits) pinctrl: samsung: Remove bogus irq_[un]mask from resource management pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static pinctrl: rza1: Remove unneeded wrong check for wrong variable pinctrl: qcom: Add ipq8074 pinctrl driver pinctrl: freescale: imx7d: make of_device_ids const. pinctrl: DT: extend the pinmux property to support integers array pinctrl: generic: Add output-enable property pinctrl: armada-37xx: Fix number of pin in sdio_sb pinctrl: armada-37xx: Fix uart2 group selection register mask pinctrl: bcm2835: Avoid warning from __irq_do_set_handler pinctrl: sh-pfc: r8a7795: Add PWM support MAINTAINERS: Add Qualcomm pinctrl drivers section arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header dt-bindings: pinctrl: Add RZ/A1 bindings doc pinctrl: Renesas RZ/A1 pin and gpio controller pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups pinctrl.txt: move it to the driver-api book pinctrl: ingenic: checking for NULL instead of IS_ERR() pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20 pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11 ...
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/Kconfig28
-rw-r--r--drivers/gpio/Makefile2
-rw-r--r--drivers/gpio/gpio-ingenic.c394
-rw-r--r--drivers/gpio/gpio-mcp23s08.c1047
4 files changed, 406 insertions, 1065 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 23ca51ee6b28..395c85df48fd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -242,6 +242,17 @@ config GPIO_ICH
If unsure, say N.
+config GPIO_INGENIC
+ tristate "Ingenic JZ47xx SoCs GPIO support"
+ depends on OF
+ depends on MACH_INGENIC || COMPILE_TEST
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support the GPIO functionality present on the
+ JZ4740 and JZ4780 SoCs from Ingenic.
+
+ If unsure, say N.
+
config GPIO_IOP
tristate "Intel IOP GPIO"
depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST
@@ -1227,23 +1238,6 @@ config GPIO_PISOSR
endmenu
-menu "SPI or I2C GPIO expanders"
- depends on (SPI_MASTER && !I2C) || I2C
-
-config GPIO_MCP23S08
- tristate "Microchip MCP23xxx I/O expander"
- depends on OF_GPIO
- select GPIOLIB_IRQCHIP
- select REGMAP_I2C if I2C
- select REGMAP if SPI_MASTER
- help
- SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
- I/O expanders.
- This provides a GPIO interface supporting inputs and outputs.
- The I2C versions of the chips can be used as interrupt-controller.
-
-endmenu
-
menu "USB GPIO expanders"
depends on USB
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 68b96277d9fa..845f990fc987 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_GPIO_GPIO_MM) += gpio-gpio-mm.o
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
+obj-$(CONFIG_GPIO_INGENIC) += gpio-ingenic.o
obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
@@ -77,7 +78,6 @@ obj-$(CONFIG_GPIO_MENZ127) += gpio-menz127.o
obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o
obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
-obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o
diff --git a/drivers/gpio/gpio-ingenic.c b/drivers/gpio/gpio-ingenic.c
new file mode 100644
index 000000000000..254780730b95
--- /dev/null
+++ b/drivers/gpio/gpio-ingenic.c
@@ -0,0 +1,394 @@
+/*
+ * Ingenic JZ47xx GPIO driver
+ *
+ * Copyright (c) 2017 Paul Cercueil <paul@crapouillou.net>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/regmap.h>
+
+#define GPIO_PIN 0x00
+#define GPIO_MSK 0x20
+
+#define JZ4740_GPIO_DATA 0x10
+#define JZ4740_GPIO_SELECT 0x50
+#define JZ4740_GPIO_DIR 0x60
+#define JZ4740_GPIO_TRIG 0x70
+#define JZ4740_GPIO_FLAG 0x80
+
+#define JZ4770_GPIO_INT 0x10
+#define JZ4770_GPIO_PAT1 0x30
+#define JZ4770_GPIO_PAT0 0x40
+#define JZ4770_GPIO_FLAG 0x50
+
+#define REG_SET(x) ((x) + 0x4)
+#define REG_CLEAR(x) ((x) + 0x8)
+
+enum jz_version {
+ ID_JZ4740,
+ ID_JZ4770,
+ ID_JZ4780,
+};
+
+struct ingenic_gpio_chip {
+ struct regmap *map;
+ struct gpio_chip gc;
+ struct irq_chip irq_chip;
+ unsigned int irq, reg_base;
+ enum jz_version version;
+};
+
+static u32 gpio_ingenic_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
+{
+ unsigned int val;
+
+ regmap_read(jzgc->map, jzgc->reg_base + reg, &val);
+
+ return (u32) val;
+}
+
+static void gpio_ingenic_set_bit(struct ingenic_gpio_chip *jzgc,
+ u8 reg, u8 offset, bool set)
+{
+ if (set)
+ reg = REG_SET(reg);
+ else
+ reg = REG_CLEAR(reg);
+
+ regmap_write(jzgc->map, jzgc->reg_base + reg, BIT(offset));
+}
+
+static inline bool gpio_get_value(struct ingenic_gpio_chip *jzgc, u8 offset)
+{
+ unsigned int val = gpio_ingenic_read_reg(jzgc, GPIO_PIN);
+
+ return !!(val & BIT(offset));
+}
+
+static void gpio_set_value(struct ingenic_gpio_chip *jzgc, u8 offset, int value)
+{
+ if (jzgc->version >= ID_JZ4770)
+ gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value);
+ else
+ gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value);
+}
+
+static void irq_set_type(struct ingenic_gpio_chip *jzgc,
+ u8 offset, unsigned int type)
+{
+ u8 reg1, reg2;
+
+ if (jzgc->version >= ID_JZ4770) {
+ reg1 = JZ4770_GPIO_PAT1;
+ reg2 = JZ4770_GPIO_PAT0;
+ } else {
+ reg1 = JZ4740_GPIO_TRIG;
+ reg2 = JZ4740_GPIO_DIR;
+ }
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ gpio_ingenic_set_bit(jzgc, reg2, offset, true);
+ gpio_ingenic_set_bit(jzgc, reg1, offset, true);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ gpio_ingenic_set_bit(jzgc, reg2, offset, false);
+ gpio_ingenic_set_bit(jzgc, reg1, offset, true);
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ gpio_ingenic_set_bit(jzgc, reg2, offset, true);
+ gpio_ingenic_set_bit(jzgc, reg1, offset, false);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ default:
+ gpio_ingenic_set_bit(jzgc, reg2, offset, false);
+ gpio_ingenic_set_bit(jzgc, reg1, offset, false);
+ break;
+ }
+}
+
+static void ingenic_gpio_irq_mask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, true);
+}
+
+static void ingenic_gpio_irq_unmask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, false);
+}
+
+static void ingenic_gpio_irq_enable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+ int irq = irqd->hwirq;
+
+ if (jzgc->version >= ID_JZ4770)
+ gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, true);
+ else
+ gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true);
+
+ ingenic_gpio_irq_unmask(irqd);
+}
+
+static void ingenic_gpio_irq_disable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+ int irq = irqd->hwirq;
+
+ ingenic_gpio_irq_mask(irqd);
+
+ if (jzgc->version >= ID_JZ4770)
+ gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, false);
+ else
+ gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false);
+}
+
+static void ingenic_gpio_irq_ack(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+ int irq = irqd->hwirq;
+ bool high;
+
+ if (irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) {
+ /*
+ * Switch to an interrupt for the opposite edge to the one that
+ * triggered the interrupt being ACKed.
+ */
+ high = gpio_get_value(jzgc, irq);
+ if (high)
+ irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_FALLING);
+ else
+ irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_RISING);
+ }
+
+ if (jzgc->version >= ID_JZ4770)
+ gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false);
+ else
+ gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true);
+}
+
+static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_BOTH:
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+ irq_set_handler_locked(irqd, handle_edge_irq);
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ case IRQ_TYPE_LEVEL_LOW:
+ irq_set_handler_locked(irqd, handle_level_irq);
+ break;
+ default:
+ irq_set_handler_locked(irqd, handle_bad_irq);
+ }
+
+ if (type == IRQ_TYPE_EDGE_BOTH) {
+ /*
+ * The hardware does not support interrupts on both edges. The
+ * best we can do is to set up a single-edge interrupt and then
+ * switch to the opposing edge when ACKing the interrupt.
+ */
+ bool high = gpio_get_value(jzgc, irqd->hwirq);
+
+ type = high ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING;
+ }
+
+ irq_set_type(jzgc, irqd->hwirq, type);
+ return 0;
+}
+
+static int ingenic_gpio_irq_set_wake(struct irq_data *irqd, unsigned int on)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ return irq_set_irq_wake(jzgc->irq, on);
+}
+
+static void ingenic_gpio_irq_handler(struct irq_desc *desc)
+{
+ struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+ struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+ unsigned long flag, i;
+
+ chained_irq_enter(irq_chip, desc);
+
+ if (jzgc->version >= ID_JZ4770)
+ flag = gpio_ingenic_read_reg(jzgc, JZ4770_GPIO_FLAG);
+ else
+ flag = gpio_ingenic_read_reg(jzgc, JZ4740_GPIO_FLAG);
+
+ for_each_set_bit(i, &flag, 32)
+ generic_handle_irq(irq_linear_revmap(gc->irqdomain, i));
+ chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_gpio_set(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ gpio_set_value(jzgc, offset, value);
+}
+
+static int ingenic_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+ return (int) gpio_get_value(jzgc, offset);
+}
+
+static int ingenic_gpio_direction_input(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ return pinctrl_gpio_direction_input(gc->base + offset);
+}
+
+static int ingenic_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ ingenic_gpio_set(gc, offset, value);
+ return pinctrl_gpio_direction_output(gc->base + offset);
+}
+
+static const struct of_device_id ingenic_gpio_of_match[] = {
+ { .compatible = "ingenic,jz4740-gpio", .data = (void *)ID_JZ4740 },
+ { .compatible = "ingenic,jz4770-gpio", .data = (void *)ID_JZ4770 },
+ { .compatible = "ingenic,jz4780-gpio", .data = (void *)ID_JZ4780 },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ingenic_gpio_of_match);
+
+static int ingenic_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id = of_match_device(
+ ingenic_gpio_of_match, dev);
+ struct ingenic_gpio_chip *jzgc;
+ u32 bank;
+ int err;
+
+ jzgc = devm_kzalloc(dev, sizeof(*jzgc), GFP_KERNEL);
+ if (!jzgc)
+ return -ENOMEM;
+
+ jzgc->map = dev_get_drvdata(dev->parent);
+ if (!jzgc->map) {
+ dev_err(dev, "Cannot get parent regmap\n");
+ return -ENXIO;
+ }
+
+ err = of_property_read_u32(dev->of_node, "reg", &bank);
+ if (err) {
+ dev_err(dev, "Cannot read \"reg\" property: %i\n", err);
+ return err;
+ }
+
+ jzgc->reg_base = bank * 0x100;
+
+ jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank);
+ if (!jzgc->gc.label)
+ return -ENOMEM;
+
+ /* DO NOT EXPAND THIS: FOR BACKWARD GPIO NUMBERSPACE COMPATIBIBILITY
+ * ONLY: WORK TO TRANSITION CONSUMERS TO USE THE GPIO DESCRIPTOR API IN
+ * <linux/gpio/consumer.h> INSTEAD.
+ */
+ jzgc->gc.base = bank * 32;
+
+ jzgc->gc.ngpio = 32;
+ jzgc->gc.parent = dev;
+ jzgc->gc.of_node = dev->of_node;
+ jzgc->gc.owner = THIS_MODULE;
+ jzgc->version = (enum jz_version)of_id->data;
+
+ jzgc->gc.set = ingenic_gpio_set;
+ jzgc->gc.get = ingenic_gpio_get;
+ jzgc->gc.direction_input = ingenic_gpio_direction_input;
+ jzgc->gc.direction_output = ingenic_gpio_direction_output;
+
+ if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
+ jzgc->gc.request = gpiochip_generic_request;
+ jzgc->gc.free = gpiochip_generic_free;
+ }
+
+ err = devm_gpiochip_add_data(dev, &jzgc->gc, jzgc);
+ if (err)
+ return err;
+
+ jzgc->irq = irq_of_parse_and_map(dev->of_node, 0);
+ if (!jzgc->irq)
+ return -EINVAL;
+
+ jzgc->irq_chip.name = jzgc->gc.label;
+ jzgc->irq_chip.irq_enable = ingenic_gpio_irq_enable;
+ jzgc->irq_chip.irq_disable = ingenic_gpio_irq_disable;
+ jzgc->irq_chip.irq_unmask = ingenic_gpio_irq_unmask;
+ jzgc->irq_chip.irq_mask = ingenic_gpio_irq_mask;
+ jzgc->irq_chip.irq_ack = ingenic_gpio_irq_ack;
+ jzgc->irq_chip.irq_set_type = ingenic_gpio_irq_set_type;
+ jzgc->irq_chip.irq_set_wake = ingenic_gpio_irq_set_wake;
+ jzgc->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
+
+ err = gpiochip_irqchip_add(&jzgc->gc, &jzgc->irq_chip, 0,
+ handle_level_irq, IRQ_TYPE_NONE);
+ if (err)
+ return err;
+
+ gpiochip_set_chained_irqchip(&jzgc->gc, &jzgc->irq_chip,
+ jzgc->irq, ingenic_gpio_irq_handler);
+ return 0;
+}
+
+static int ingenic_gpio_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver ingenic_gpio_driver = {
+ .driver = {
+ .name = "gpio-ingenic",
+ .of_match_table = of_match_ptr(ingenic_gpio_of_match),
+ },
+ .probe = ingenic_gpio_probe,
+ .remove = ingenic_gpio_remove,
+};
+
+static int __init ingenic_gpio_drv_register(void)
+{
+ return platform_driver_register(&ingenic_gpio_driver);
+}
+subsys_initcall(ingenic_gpio_drv_register);
+
+static void __exit ingenic_gpio_drv_unregister(void)
+{
+ platform_driver_unregister(&ingenic_gpio_driver);
+}
+module_exit(ingenic_gpio_drv_unregister);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ47xx GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
deleted file mode 100644
index 2a57d024481d..000000000000
--- a/drivers/gpio/gpio-mcp23s08.c
+++ /dev/null
@@ -1,1047 +0,0 @@
-/*
- * MCP23S08 SPI/I2C GPIO gpio expander driver
- *
- * The inputs and outputs of the mcp23s08, mcp23s17, mcp23008 and mcp23017 are
- * supported.
- * For the I2C versions of the chips (mcp23008 and mcp23017) generation of
- * interrupts is also supported.
- * The hardware of the SPI versions of the chips (mcp23s08 and mcp23s17) is
- * also capable of generating interrupts, but the linux driver does not
- * support that yet.
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mcp23s08.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-#include <linux/interrupt.h>
-#include <linux/of_irq.h>
-#include <linux/of_device.h>
-#include <linux/regmap.h>
-
-/**
- * MCP types supported by driver
- */
-#define MCP_TYPE_S08 0
-#define MCP_TYPE_S17 1
-#define MCP_TYPE_008 2
-#define MCP_TYPE_017 3
-#define MCP_TYPE_S18 4
-
-/* Registers are all 8 bits wide.
- *
- * The mcp23s17 has twice as many bits, and can be configured to work
- * with either 16 bit registers or with two adjacent 8 bit banks.
- */
-#define MCP_IODIR 0x00 /* init/reset: all ones */
-#define MCP_IPOL 0x01
-#define MCP_GPINTEN 0x02
-#define MCP_DEFVAL 0x03
-#define MCP_INTCON 0x04
-#define MCP_IOCON 0x05
-# define IOCON_MIRROR (1 << 6)
-# define IOCON_SEQOP (1 << 5)
-# define IOCON_HAEN (1 << 3)
-# define IOCON_ODR (1 << 2)
-# define IOCON_INTPOL (1 << 1)
-# define IOCON_INTCC (1)
-#define MCP_GPPU 0x06
-#define MCP_INTF 0x07
-#define MCP_INTCAP 0x08
-#define MCP_GPIO 0x09
-#define MCP_OLAT 0x0a
-
-struct mcp23s08;
-
-struct mcp23s08 {
- u8 addr;
- bool irq_active_high;
- bool reg_shift;
-
- u16 cache[11];
- u16 irq_rise;
- u16 irq_fall;
- int irq;
- bool irq_controller;
- /* lock protects the cached values */
- struct mutex lock;
- struct mutex irq_lock;
-
- struct gpio_chip chip;
-
- struct regmap *regmap;
- struct device *dev;
-};
-
-static const struct regmap_config mcp23x08_regmap = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .reg_stride = 1,
- .max_register = MCP_OLAT,
-};
-
-static const struct regmap_config mcp23x17_regmap = {
- .reg_bits = 8,
- .val_bits = 16,
-
- .reg_stride = 2,
- .max_register = MCP_OLAT << 1,
- .val_format_endian = REGMAP_ENDIAN_LITTLE,
-};
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SPI_MASTER
-
-static int mcp23sxx_spi_write(void *context, const void *data, size_t count)
-{
- struct mcp23s08 *mcp = context;
- struct spi_device *spi = to_spi_device(mcp->dev);
- struct spi_message m;
- struct spi_transfer t[2] = { { .tx_buf = &mcp->addr, .len = 1, },
- { .tx_buf = data, .len = count, }, };
-
- spi_message_init(&m);
- spi_message_add_tail(&t[0], &m);
- spi_message_add_tail(&t[1], &m);
-
- return spi_sync(spi, &m);
-}
-
-static int mcp23sxx_spi_gather_write(void *context,
- const void *reg, size_t reg_size,
- const void *val, size_t val_size)
-{
- struct mcp23s08 *mcp = context;
- struct spi_device *spi = to_spi_device(mcp->dev);
- struct spi_message m;
- struct spi_transfer t[3] = { { .tx_buf = &mcp->addr, .len = 1, },
- { .tx_buf = reg, .len = reg_size, },
- { .tx_buf = val, .len = val_size, }, };
-
- spi_message_init(&m);
- spi_message_add_tail(&t[0], &m);
- spi_message_add_tail(&t[1], &m);
- spi_message_add_tail(&t[2], &m);
-
- return spi_sync(spi, &m);
-}
-
-static int mcp23sxx_spi_read(void *context, const void *reg, size_t reg_size,
- void *val, size_t val_size)
-{
- struct mcp23s08 *mcp = context;
- struct spi_device *spi = to_spi_device(mcp->dev);
- u8 tx[2];
-
- if (reg_size != 1)
- return -EINVAL;
-
- tx[0] = mcp->addr | 0x01;
- tx[1] = *((u8 *) reg);
-
- return spi_write_then_read(spi, tx, sizeof(tx), val, val_size);
-}
-
-static const struct regmap_bus mcp23sxx_spi_regmap = {
- .write = mcp23sxx_spi_write,
- .gather_write = mcp23sxx_spi_gather_write,
- .read = mcp23sxx_spi_read,
-};
-
-#endif /* CONFIG_SPI_MASTER */
-
-static int mcp_read(struct mcp23s08 *mcp, unsigned int reg, unsigned int *val)
-{
- return regmap_read(mcp->regmap, reg << mcp->reg_shift, val);
-}
-
-static int mcp_write(struct mcp23s08 *mcp, unsigned int reg, unsigned int val)
-{
- return regmap_write(mcp->regmap, reg << mcp->reg_shift, val);
-}
-
-static int mcp_update_cache(struct mcp23s08 *mcp)
-{
- int ret, reg, i;
-
- for (i = 0; i < ARRAY_SIZE(mcp->cache); i++) {
- ret = mcp_read(mcp, i, &reg);
- if (ret < 0)
- return ret;
- mcp->cache[i] = reg;
- }
-
- return 0;
-}
-
-/*----------------------------------------------------------------------*/
-
-/* A given spi_device can represent up to eight mcp23sxx chips
- * sharing the same chipselect but using different addresses
- * (e.g. chips #0 and #3 might be populated, but not #1 or $2).
- * Driver data holds all the per-chip data.
- */
-struct mcp23s08_driver_data {
- unsigned ngpio;
- struct mcp23s08 *mcp[8];
- struct mcp23s08 chip[];
-};
-
-
-static int mcp23s08_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct mcp23s08 *mcp = gpiochip_get_data(chip);
- int status;
-
- mutex_lock(&mcp->lock);
- mcp->cache[MCP_IODIR] |= (1 << offset);
- status = mcp_write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]);
- mutex_unlock(&mcp->lock);
- return status;
-}
-
-static int mcp23s08_get(struct gpio_chip *chip, unsigned offset)
-{
- struct mcp23s08 *mcp = gpiochip_get_data(chip);
- int status, ret;
-
- mutex_lock(&mcp->lock);
-
- /* REVISIT reading this clears any IRQ ... */
- ret = mcp_read(mcp, MCP_GPIO, &status);
- if (ret < 0)
- status = 0;
- else {
- mcp->cache[MCP_GPIO] = status;
- status = !!(status & (1 << offset));
- }
- mutex_unlock(&mcp->lock);
- return status;
-}
-
-static int __mcp23s08_set(struct mcp23s08 *mcp, unsigned mask, int value)
-{
- unsigned olat = mcp->cache[MCP_OLAT];
-
- if (value)
- olat |= mask;
- else
- olat &= ~mask;
- mcp->cache[MCP_OLAT] = olat;
- return mcp_write(mcp, MCP_OLAT, olat);
-}
-
-static void mcp23s08_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct mcp23s08 *mcp = gpiochip_get_data(chip);
- unsigned mask = 1 << offset;
-
- mutex_lock(&mcp->lock);
- __mcp23s08_set(mcp, mask, value);
- mutex_unlock(&mcp->lock);
-}
-
-static int
-mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct mcp23s08 *mcp = gpiochip_get_data(chip);
- unsigned mask = 1 << offset;
- int status;
-
- mutex_lock(&mcp->lock);
- status = __mcp23s08_set(mcp, mask, value);
- if (status == 0) {
- mcp->cache[MCP_IODIR] &= ~mask;
- status = mcp_write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]);
- }
- mutex_unlock(&mcp->lock);
- return status;
-}
-
-/*----------------------------------------------------------------------*/
-static irqreturn_t mcp23s08_irq(int irq, void *data)
-{
- struct mcp23s08 *mcp = data;
- int intcap, intf, i, gpio, gpio_orig, intcap_mask;
- unsigned int child_irq;
- bool intf_set, intcap_changed, gpio_bit_changed,
- defval_changed, gpio_set;
-
- mutex_lock(&mcp->lock);
- if (mcp_read(mcp, MCP_INTF, &intf) < 0) {
- mutex_unlock(&mcp->lock);
- return IRQ_HANDLED;
- }
-
- mcp->cache[MCP_INTF] = intf;
-
- if (mcp_read(mcp, MCP_INTCAP, &intcap) < 0) {
- mutex_unlock(&mcp->lock);
- return IRQ_HANDLED;
- }
-
- mcp->cache[MCP_INTCAP] = intcap;
-
- /* This clears the interrupt(configurable on S18) */
- if (mcp_read(mcp, MCP_GPIO, &gpio) < 0) {
- mutex_unlock(&mcp->lock);
- return IRQ_HANDLED;
- }
- gpio_orig = mcp->cache[MCP_GPIO];
- mcp->cache[MCP_GPIO] = gpio;
- mutex_unlock(&mcp->lock);
-
- if (mcp->cache[MCP_INTF] == 0) {
- /* There is no interrupt pending */
- return IRQ_HANDLED;
- }
-
- dev_dbg(mcp->chip.parent,
- "intcap 0x%04X intf 0x%04X gpio_orig 0x%04X gpio 0x%04X\n",
- intcap, intf, gpio_orig, gpio);
-
- for (i = 0; i < mcp->chip.ngpio; i++) {
- /* We must check all of the inputs on the chip,
- * otherwise we may not notice a change on >=2 pins.
- *
- * On at least the mcp23s17, INTCAP is only updated
- * one byte at a time(INTCAPA and INTCAPB are
- * not written to at the same time - only on a per-bank
- * basis).
- *
- * INTF only contains the single bit that caused the
- * interrupt per-bank. On the mcp23s17, there is
- * INTFA and INTFB. If two pins are changed on the A
- * side at the same time, INTF will only have one bit
- * set. If one pin on the A side and one pin on the B
- * side are changed at the same time, INTF will have
- * two bits set. Thus, INTF can't be the only check
- * to see if the input has changed.
- */
-
- intf_set = BIT(i) & mcp->cache[MCP_INTF];
- if (i < 8 && intf_set)
- intcap_mask = 0x00FF;
- else if (i >= 8 && intf_set)
- intcap_mask = 0xFF00;
- else
- intcap_mask = 0x00;
-
- intcap_changed = (intcap_mask &
- (BIT(i) & mcp->cache[MCP_INTCAP])) !=
- (intcap_mask & (BIT(i) & gpio_orig));
- gpio_set = BIT(i) & mcp->cache[MCP_GPIO];
- gpio_bit_changed = (BIT(i) & gpio_orig) !=
- (BIT(i) & mcp->cache[MCP_GPIO]);
- defval_changed = (BIT(i) & mcp->cache[MCP_INTCON]) &&
- ((BIT(i) & mcp->cache[MCP_GPIO]) !=
- (BIT(i) & mcp->cache[MCP_DEFVAL]));
-
- if (((gpio_bit_changed || intcap_changed) &&
- (BIT(i) & mcp->irq_rise) && gpio_set) ||
- ((gpio_bit_changed || intcap_changed) &&
- (BIT(i) & mcp->irq_fall) && !gpio_set) ||
- defval_changed) {
- child_irq = irq_find_mapping(mcp->chip.irqdomain, i);
- handle_nested_irq(child_irq);
- }
- }
-
- return IRQ_HANDLED;
-}
-
-static void mcp23s08_irq_mask(struct irq_data *data)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
- struct mcp23s08 *mcp = gpiochip_get_data(gc);
- unsigned int pos = data->hwirq;
-
- mcp->cache[MCP_GPINTEN] &= ~BIT(pos);
-}
-
-static void mcp23s08_irq_unmask(struct irq_data *data)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
- struct mcp23s08 *mcp = gpiochip_get_data(gc);
- unsigned int pos = data->hwirq;
-
- mcp->cache[MCP_GPINTEN] |= BIT(pos);
-}
-
-static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
- struct mcp23s08 *mcp = gpiochip_get_data(gc);
- unsigned int pos = data->hwirq;
- int status = 0;
-
- if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
- mcp->cache[MCP_INTCON] &= ~BIT(pos);
- mcp->irq_rise |= BIT(pos);
- mcp->irq_fall |= BIT(pos);
- } else if (type & IRQ_TYPE_EDGE_RISING) {
- mcp->cache[MCP_INTCON] &= ~BIT(pos);
- mcp->irq_rise |= BIT(pos);
- mcp->irq_fall &= ~BIT(pos);
- } else if (type & IRQ_TYPE_EDGE_FALLING) {
- mcp->cache[MCP_INTCON] &= ~BIT(pos);
- mcp->irq_rise &= ~BIT(pos);
- mcp->irq_fall |= BIT(pos);
- } else if (type & IRQ_TYPE_LEVEL_HIGH) {
- mcp->cache[MCP_INTCON] |= BIT(pos);
- mcp->cache[MCP_DEFVAL] &= ~BIT(pos);
- } else if (type & IRQ_TYPE_LEVEL_LOW) {
- mcp->cache[MCP_INTCON] |= BIT(pos);
- mcp->cache[MCP_DEFVAL] |= BIT(pos);
- } else
- return -EINVAL;
-
- return status;
-}
-
-static void mcp23s08_irq_bus_lock(struct irq_data *data)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
- struct mcp23s08 *mcp = gpiochip_get_data(gc);
-
- mutex_lock(&mcp->irq_lock);
-}
-
-static void mcp23s08_irq_bus_unlock(struct irq_data *data)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
- struct mcp23s08 *mcp = gpiochip_get_data(gc);
-
- mutex_lock(&mcp->lock);
- mcp_write(mcp, MCP_GPINTEN, mcp->cache[MCP_GPINTEN]);
- mcp_write(mcp, MCP_DEFVAL, mcp->cache[MCP_DEFVAL]);
- mcp_write(mcp, MCP_INTCON, mcp->cache[MCP_INTCON]);
- mutex_unlock(&mcp->lock);
- mutex_unlock(&mcp->irq_lock);
-}
-
-static struct irq_chip mcp23s08_irq_chip = {
- .name = "gpio-mcp23xxx",
- .irq_mask = mcp23s08_irq_mask,
- .irq_unmask = mcp23s08_irq_unmask,
- .irq_set_type = mcp23s08_irq_set_type,
- .irq_bus_lock = mcp23s08_irq_bus_lock,
- .irq_bus_sync_unlock = mcp23s08_irq_bus_unlock,
-};
-
-static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
-{
- struct gpio_chip *chip = &mcp->chip;
- int err;
- unsigned long irqflags = IRQF_ONESHOT | IRQF_SHARED;
-
- mutex_init(&mcp->irq_lock);
-
- if (mcp->irq_active_high)
- irqflags |= IRQF_TRIGGER_HIGH;
- else
- irqflags |= IRQF_TRIGGER_LOW;
-
- err = devm_request_threaded_irq(chip->parent, mcp->irq, NULL,
- mcp23s08_irq,
- irqflags, dev_name(chip->parent), mcp);
- if (err != 0) {
- dev_err(chip->parent, "unable to request IRQ#%d: %d\n",
- mcp->irq, err);
- return err;
- }
-
- err = gpiochip_irqchip_add_nested(chip,
- &mcp23s08_irq_chip,
- 0,
- handle_simple_irq,
- IRQ_TYPE_NONE);
- if (err) {
- dev_err(chip->parent,
- "could not connect irqchip to gpiochip: %d\n", err);
- return err;
- }
-
- gpiochip_set_nested_irqchip(chip,
- &mcp23s08_irq_chip,
- mcp->irq);
-
- return 0;
-}
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/seq_file.h>
-
-/*
- * This shows more info than the generic gpio dump code:
- * pullups, deglitching, open drain drive.
- */
-static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-{
- struct mcp23s08 *mcp;
- char bank;
- int t;
- unsigned mask;
-
- mcp = gpiochip_get_data(chip);
-
- /* NOTE: we only handle one bank for now ... */
- bank = '0' + ((mcp->addr >> 1) & 0x7);
-
- mutex_lock(&mcp->lock);
- t = mcp_update_cache(mcp);
- if (t < 0) {
- seq_printf(s, " I/O ERROR %d\n", t);
- goto done;
- }
-
- for (t = 0, mask = 1; t < chip->ngpio; t++, mask <<= 1) {
- const char *label;
-
- label = gpiochip_is_requested(chip, t);
- if (!label)
- continue;
-
- seq_printf(s, " gpio-%-3d P%c.%d (%-12s) %s %s %s",
- chip->base + t, bank, t, label,
- (mcp->cache[MCP_IODIR] & mask) ? "in " : "out",
- (mcp->cache[MCP_GPIO] & mask) ? "hi" : "lo",
- (mcp->cache[MCP_GPPU] & mask) ? "up" : " ");
- /* NOTE: ignoring the irq-related registers */
- seq_puts(s, "\n");
- }
-done:
- mutex_unlock(&mcp->lock);
-}
-
-#else
-#define mcp23s08_dbg_show NULL
-#endif
-
-/*----------------------------------------------------------------------*/
-
-static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
- void *data, unsigned addr, unsigned type,
- struct mcp23s08_platform_data *pdata, int cs)
-{
- int status, ret;
- bool mirror = false;
-
- mutex_init(&mcp->lock);
-
- mcp->dev = dev;
- mcp->addr = addr;
- mcp->irq_active_high = false;
-
- mcp->chip.direction_input = mcp23s08_direction_input;
- mcp->chip.get = mcp23s08_get;
- mcp->chip.direction_output = mcp23s08_direction_output;
- mcp->chip.set = mcp23s08_set;
- mcp->chip.dbg_show = mcp23s08_dbg_show;
-#ifdef CONFIG_OF_GPIO
- mcp->chip.of_gpio_n_cells = 2;
- mcp->chip.of_node = dev->of_node;
-#endif
-
- switch (type) {
-#ifdef CONFIG_SPI_MASTER
- case MCP_TYPE_S08:
- mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp,
- &mcp23x08_regmap);
- mcp->reg_shift = 0;
- mcp->chip.ngpio = 8;
- mcp->chip.label = "mcp23s08";
- break;
-
- case MCP_TYPE_S17:
- mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp,
- &mcp23x17_regmap);
- mcp->reg_shift = 1;
- mcp->chip.ngpio = 16;
- mcp->chip.label = "mcp23s17";
- break;
-
- case MCP_TYPE_S18:
- mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp,
- &mcp23x17_regmap);
- mcp->reg_shift = 1;
- mcp->chip.ngpio = 16;
- mcp->chip.label = "mcp23s18";
- break;
-#endif /* CONFIG_SPI_MASTER */
-
-#if IS_ENABLED(CONFIG_I2C)
- case MCP_TYPE_008:
- mcp->regmap = devm_regmap_init_i2c(data, &mcp23x08_regmap);
- mcp->reg_shift = 0;
- mcp->chip.ngpio = 8;
- mcp->chip.label = "mcp23008";
- break;
-
- case MCP_TYPE_017:
- mcp->regmap = devm_regmap_init_i2c(data, &mcp23x17_regmap);
- mcp->reg_shift = 1;
- mcp->chip.ngpio = 16;
- mcp->chip.label = "mcp23017";
- break;
-#endif /* CONFIG_I2C */
-
- default:
- dev_err(dev, "invalid device type (%d)\n", type);
- return -EINVAL;
- }
-
- if (IS_ERR(mcp->regmap))
- return PTR_ERR(mcp->regmap);
-
- mcp->chip.base = pdata->base;
- mcp->chip.can_sleep = true;
- mcp->chip.parent = dev;
- mcp->chip.owner = THIS_MODULE;
-
- /* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
- * and MCP_IOCON.HAEN = 1, so we work with all chips.
- */
-
- ret = mcp_read(mcp, MCP_IOCON, &status);
- if (ret < 0)
- goto fail;
-
- mcp->irq_controller = pdata->irq_controller;
- if (mcp->irq && mcp->irq_controller) {
- mcp->irq_active_high =
- of_property_read_bool(mcp->chip.parent->of_node,
- "microchip,irq-active-high");
-
- mirror = pdata->mirror;
- }
-
- if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror ||
- mcp->irq_active_high) {
- /* mcp23s17 has IOCON twice, make sure they are in sync */
- status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
- status |= IOCON_HAEN | (IOCON_HAEN << 8);
- if (mcp->irq_active_high)
- status |= IOCON_INTPOL | (IOCON_INTPOL << 8);
- else
- status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8));
-
- if (mirror)
- status |= IOCON_MIRROR | (IOCON_MIRROR << 8);
-
- if (type == MCP_TYPE_S18)
- status |= IOCON_INTCC | (IOCON_INTCC << 8);
-
- ret = mcp_write(mcp, MCP_IOCON, status);
- if (ret < 0)
- goto fail;
- }
-
- /* configure ~100K pullups */
- ret = mcp_write(mcp, MCP_GPPU, pdata->chip[cs].pullups);
- if (ret < 0)
- goto fail;
-
- ret = mcp_update_cache(mcp);
- if (ret < 0)
- goto fail;
-
- /* disable inverter on input */
- if (mcp->cache[MCP_IPOL] != 0) {
- mcp->cache[MCP_IPOL] = 0;
- ret = mcp_write(mcp, MCP_IPOL, 0);
- if (ret < 0)
- goto fail;
- }
-
- /* disable irqs */
- if (mcp->cache[MCP_GPINTEN] != 0) {
- mcp->cache[MCP_GPINTEN] = 0;
- ret = mcp_write(mcp, MCP_GPINTEN, 0);
- if (ret < 0)
- goto fail;
- }
-
- ret = gpiochip_add_data(&mcp->chip, mcp);
- if (ret < 0)
- goto fail;
-
- if (mcp->irq && mcp->irq_controller) {
- ret = mcp23s08_irq_setup(mcp);
- if (ret)
- goto fail;
- }
-fail:
- if (ret < 0)
- dev_dbg(dev, "can't setup chip %d, --> %d\n", addr, ret);
- return ret;
-}
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_OF
-#ifdef CONFIG_SPI_MASTER
-static const struct of_device_id mcp23s08_spi_of_match[] = {
- {
- .compatible = "microchip,mcp23s08",
- .data = (void *) MCP_TYPE_S08,
- },
- {
- .compatible = "microchip,mcp23s17",
- .data = (void *) MCP_TYPE_S17,
- },
- {
- .compatible = "microchip,mcp23s18",
- .data = (void *) MCP_TYPE_S18,
- },
-/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
- {
- .compatible = "mcp,mcp23s08",
- .data = (void *) MCP_TYPE_S08,
- },
- {
- .compatible = "mcp,mcp23s17",
- .data = (void *) MCP_TYPE_S17,
- },
- { },
-};
-MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match);
-#endif
-
-#if IS_ENABLED(CONFIG_I2C)
-static const struct of_device_id mcp23s08_i2c_of_match[] = {
- {
- .compatible = "microchip,mcp23008",
- .data = (void *) MCP_TYPE_008,
- },
- {
- .compatible = "microchip,mcp23017",
- .data = (void *) MCP_TYPE_017,
- },
-/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
- {
- .compatible = "mcp,mcp23008",
- .data = (void *) MCP_TYPE_008,
- },
- {
- .compatible = "mcp,mcp23017",
- .data = (void *) MCP_TYPE_017,
- },
- { },
-};
-MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match);
-#endif
-#endif /* CONFIG_OF */
-
-
-#if IS_ENABLED(CONFIG_I2C)
-
-static int mcp230xx_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct mcp23s08_platform_data *pdata, local_pdata;
- struct mcp23s08 *mcp;
- int status;
- const struct of_device_id *match;
-
- match = of_match_device(of_match_ptr(mcp23s08_i2c_of_match),
- &client->dev);
- if (match) {
- pdata = &local_pdata;
- pdata->base = -1;
- pdata->chip[0].pullups = 0;
- pdata->irq_controller = of_property_read_bool(
- client->dev.of_node,
- "interrupt-controller");
- pdata->mirror = of_property_read_bool(client->dev.of_node,
- "microchip,irq-mirror");
- client->irq = irq_of_parse_and_map(client->dev.of_node, 0);
- } else {
- pdata = dev_get_platdata(&client->dev);
- if (!pdata) {
- pdata = devm_kzalloc(&client->dev,
- sizeof(struct mcp23s08_platform_data),
- GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
- pdata->base = -1;
- }
- }
-
- mcp = kzalloc(sizeof(*mcp), GFP_KERNEL);
- if (!mcp)
- return -ENOMEM;
-
- mcp->irq = client->irq;
- status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
- id->driver_data, pdata, 0);
- if (status)
- goto fail;
-
- i2c_set_clientdata(client, mcp);
-
- return 0;
-
-fail:
- kfree(mcp);
-
- return status;
-}
-
-static int mcp230xx_remove(struct i2c_client *client)
-{
- struct mcp23s08 *mcp = i2c_get_clientdata(client);
-
- gpiochip_remove(&mcp->chip);
- kfree(mcp);
-
- return 0;
-}
-
-static const struct i2c_device_id mcp230xx_id[] = {
- { "mcp23008", MCP_TYPE_008 },
- { "mcp23017", MCP_TYPE_017 },
- { },
-};
-MODULE_DEVICE_TABLE(i2c, mcp230xx_id);
-
-static struct i2c_driver mcp230xx_driver = {
- .driver = {
- .name = "mcp230xx",
- .of_match_table = of_match_ptr(mcp23s08_i2c_of_match),
- },
- .probe = mcp230xx_probe,
- .remove = mcp230xx_remove,
- .id_table = mcp230xx_id,
-};
-
-static int __init mcp23s08_i2c_init(void)
-{
- return i2c_add_driver(&mcp230xx_driver);
-}
-
-static void mcp23s08_i2c_exit(void)
-{
- i2c_del_driver(&mcp230xx_driver);
-}
-
-#else
-
-static int __init mcp23s08_i2c_init(void) { return 0; }
-static void mcp23s08_i2c_exit(void) { }
-
-#endif /* CONFIG_I2C */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SPI_MASTER
-
-static int mcp23s08_probe(struct spi_device *spi)
-{
- struct mcp23s08_platform_data *pdata, local_pdata;
- unsigned addr;
- int chips = 0;
- struct mcp23s08_driver_data *data;
- int status, type;
- unsigned ngpio = 0;
- const struct of_device_id *match;
- u32 spi_present_mask = 0;
-
- match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev);
- if (match) {
- type = (int)(uintptr_t)match->data;
- status = of_property_read_u32(spi->dev.of_node,
- "microchip,spi-present-mask", &spi_present_mask);
- if (status) {
- status = of_property_read_u32(spi->dev.of_node,
- "mcp,spi-present-mask", &spi_present_mask);
- if (status) {
- dev_err(&spi->dev,
- "DT has no spi-present-mask\n");
- return -ENODEV;
- }
- }
- if ((spi_present_mask <= 0) || (spi_present_mask >= 256)) {
- dev_err(&spi->dev, "invalid spi-present-mask\n");
- return -ENODEV;
- }
-
- pdata = &local_pdata;
- pdata->base = -1;
- for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
- pdata->chip[addr].pullups = 0;
- if (spi_present_mask & (1 << addr))
- chips++;
- }
- pdata->irq_controller = of_property_read_bool(
- spi->dev.of_node,
- "interrupt-controller");
- pdata->mirror = of_property_read_bool(spi->dev.of_node,
- "microchip,irq-mirror");
- } else {
- type = spi_get_device_id(spi)->driver_data;
- pdata = dev_get_platdata(&spi->dev);
- if (!pdata) {
- pdata = devm_kzalloc(&spi->dev,
- sizeof(struct mcp23s08_platform_data),
- GFP_KERNEL);
- pdata->base = -1;
- }
-
- for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
- if (!pdata->chip[addr].is_present)
- continue;
- chips++;
- if ((type == MCP_TYPE_S08) && (addr > 3)) {
- dev_err(&spi->dev,
- "mcp23s08 only supports address 0..3\n");
- return -EINVAL;
- }
- spi_present_mask |= 1 << addr;
- }
- }
-
- if (!chips)
- return -ENODEV;
-
- data = devm_kzalloc(&spi->dev,
- sizeof(*data) + chips * sizeof(struct mcp23s08),
- GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- spi_set_drvdata(spi, data);
-
- spi->irq = irq_of_parse_and_map(spi->dev.of_node, 0);
-
- for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
- if (!(spi_present_mask & (1 << addr)))
- continue;
- chips--;
- data->mcp[addr] = &data->chip[chips];
- data->mcp[addr]->irq = spi->irq;
- status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi,
- 0x40 | (addr << 1), type, pdata,
- addr);
- if (status < 0)
- goto fail;
-
- if (pdata->base != -1)
- pdata->base += data->mcp[addr]->chip.ngpio;
- ngpio += data->mcp[addr]->chip.ngpio;
- }
- data->ngpio = ngpio;
-
- /* NOTE: these chips have a relatively sane IRQ framework, with
- * per-signal masking and level/edge triggering. It's not yet
- * handled here...
- */
-
- return 0;
-
-fail:
- for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) {
-
- if (!data->mcp[addr])
- continue;
- gpiochip_remove(&data->mcp[addr]->chip);
- }
- return status;
-}
-
-static int mcp23s08_remove(struct spi_device *spi)
-{
- struct mcp23s08_driver_data *data = spi_get_drvdata(spi);
- unsigned addr;
-
- for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) {
-
- if (!data->mcp[addr])
- continue;
-
- gpiochip_remove(&data->mcp[addr]->chip);
- }
-
- return 0;
-}
-
-static const struct spi_device_id mcp23s08_ids[] = {
- { "mcp23s08", MCP_TYPE_S08 },
- { "mcp23s17", MCP_TYPE_S17 },
- { "mcp23s18", MCP_TYPE_S18 },
- { },
-};
-MODULE_DEVICE_TABLE(spi, mcp23s08_ids);
-
-static struct spi_driver mcp23s08_driver = {
- .probe = mcp23s08_probe,
- .remove = mcp23s08_remove,
- .id_table = mcp23s08_ids,
- .driver = {
- .name = "mcp23s08",
- .of_match_table = of_match_ptr(mcp23s08_spi_of_match),
- },
-};
-
-static int __init mcp23s08_spi_init(void)
-{
- return spi_register_driver(&mcp23s08_driver);
-}
-
-static void mcp23s08_spi_exit(void)
-{
- spi_unregister_driver(&mcp23s08_driver);
-}
-
-#else
-
-static int __init mcp23s08_spi_init(void) { return 0; }
-static void mcp23s08_spi_exit(void) { }
-
-#endif /* CONFIG_SPI_MASTER */
-
-/*----------------------------------------------------------------------*/
-
-static int __init mcp23s08_init(void)
-{
- int ret;
-
- ret = mcp23s08_spi_init();
- if (ret)
- goto spi_fail;
-
- ret = mcp23s08_i2c_init();
- if (ret)
- goto i2c_fail;
-
- return 0;
-
- i2c_fail:
- mcp23s08_spi_exit();
- spi_fail:
- return ret;
-}
-/* register after spi/i2c postcore initcall and before
- * subsys initcalls that may rely on these GPIOs
- */
-subsys_initcall(mcp23s08_init);
-
-static void __exit mcp23s08_exit(void)
-{
- mcp23s08_spi_exit();
- mcp23s08_i2c_exit();
-}
-module_exit(mcp23s08_exit);
-
-MODULE_LICENSE("GPL");