gpio: reorganize drivers

Sort the gpio makefile and enforce the naming convention gpio-*.c for
gpio drivers.

v2: cleaned up filenames in Kconfig and comment blocks
v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

1 files changed, 348 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c
new file mode 100644
index 000000000000..aa4f09ad3ced
--- /dev/null
+++ b/drivers/gpio/gpio-bt8xx.c
@@ -0,0 +1,348 @@
+/*
+
+    bt8xx GPIO abuser
+
+    Copyright (C) 2008 Michael Buesch <mb@bu3sch.de>
+
+    Please do _only_ contact the people listed _above_ with issues related to this driver.
+    All the other people listed below are not related to this driver. Their names
+    are only here, because this driver is derived from the bt848 driver.
+
+
+    Derived from the bt848 driver:
+
+    Copyright (C) 1996,97,98 Ralph  Metzler
+			   & Marcus Metzler
+    (c) 1999-2002 Gerd Knorr
+
+    some v4l2 code lines are taken from Justin's bttv2 driver which is
+    (c) 2000 Justin Schoeman
+
+    V4L1 removal from:
+    (c) 2005-2006 Nickolay V. Shmyrev
+
+    Fixes to be fully V4L2 compliant by
+    (c) 2006 Mauro Carvalho Chehab
+
+    Cropping and overscan support
+    Copyright (C) 2005, 2006 Michael H. Schimek
+    Sponsored by OPQ Systems AB
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+/* Steal the hardware definitions from the bttv driver. */
+#include "../media/video/bt8xx/bt848.h"
+
+
+#define BT8XXGPIO_NR_GPIOS		24 /* We have 24 GPIO pins */
+
+
+struct bt8xxgpio {
+	spinlock_t lock;
+
+	void __iomem *mmio;
+	struct pci_dev *pdev;
+	struct gpio_chip gpio;
+
+#ifdef CONFIG_PM
+	u32 saved_outen;
+	u32 saved_data;
+#endif
+};
+
+#define bgwrite(dat, adr)	writel((dat), bg->mmio+(adr))
+#define bgread(adr)		readl(bg->mmio+(adr))
+
+
+static int modparam_gpiobase = -1/* dynamic */;
+module_param_named(gpiobase, modparam_gpiobase, int, 0444);
+MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
+
+
+static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 outen, data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	data = bgread(BT848_GPIO_DATA);
+	data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	outen = bgread(BT848_GPIO_OUT_EN);
+	outen &= ~(1 << nr);
+	bgwrite(outen, BT848_GPIO_OUT_EN);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+
+static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&bg->lock, flags);
+	val = bgread(BT848_GPIO_DATA);
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return !!(val & (1 << nr));
+}
+
+static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio,
+					unsigned nr, int val)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 outen, data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	outen = bgread(BT848_GPIO_OUT_EN);
+	outen |= (1 << nr);
+	bgwrite(outen, BT848_GPIO_OUT_EN);
+
+	data = bgread(BT848_GPIO_DATA);
+	if (val)
+		data |= (1 << nr);
+	else
+		data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+
+static void bt8xxgpio_gpio_set(struct gpio_chip *gpio,
+			    unsigned nr, int val)
+{
+	struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio);
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	data = bgread(BT848_GPIO_DATA);
+	if (val)
+		data |= (1 << nr);
+	else
+		data &= ~(1 << nr);
+	bgwrite(data, BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+}
+
+static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg)
+{
+	struct gpio_chip *c = &bg->gpio;
+
+	c->label = dev_name(&bg->pdev->dev);
+	c->owner = THIS_MODULE;
+	c->direction_input = bt8xxgpio_gpio_direction_input;
+	c->get = bt8xxgpio_gpio_get;
+	c->direction_output = bt8xxgpio_gpio_direction_output;
+	c->set = bt8xxgpio_gpio_set;
+	c->dbg_show = NULL;
+	c->base = modparam_gpiobase;
+	c->ngpio = BT8XXGPIO_NR_GPIOS;
+	c->can_sleep = 0;
+}
+
+static int bt8xxgpio_probe(struct pci_dev *dev,
+			const struct pci_device_id *pci_id)
+{
+	struct bt8xxgpio *bg;
+	int err;
+
+	bg = kzalloc(sizeof(*bg), GFP_KERNEL);
+	if (!bg)
+		return -ENOMEM;
+
+	bg->pdev = dev;
+	spin_lock_init(&bg->lock);
+
+	err = pci_enable_device(dev);
+	if (err) {
+		printk(KERN_ERR "bt8xxgpio: Can't enable device.\n");
+		goto err_freebg;
+	}
+	if (!request_mem_region(pci_resource_start(dev, 0),
+				pci_resource_len(dev, 0),
+				"bt8xxgpio")) {
+		printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n",
+		       (unsigned long long)pci_resource_start(dev, 0));
+		err = -EBUSY;
+		goto err_disable;
+	}
+	pci_set_master(dev);
+	pci_set_drvdata(dev, bg);
+
+	bg->mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
+	if (!bg->mmio) {
+		printk(KERN_ERR "bt8xxgpio: ioremap() failed\n");
+		err = -EIO;
+		goto err_release_mem;
+	}
+
+	/* Disable interrupts */
+	bgwrite(0, BT848_INT_MASK);
+
+	/* gpio init */
+	bgwrite(0, BT848_GPIO_DMA_CTL);
+	bgwrite(0, BT848_GPIO_REG_INP);
+	bgwrite(0, BT848_GPIO_OUT_EN);
+
+	bt8xxgpio_gpio_setup(bg);
+	err = gpiochip_add(&bg->gpio);
+	if (err) {
+		printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n");
+		goto err_release_mem;
+	}
+
+	printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n",
+	       bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1);
+
+	return 0;
+
+err_release_mem:
+	release_mem_region(pci_resource_start(dev, 0),
+			   pci_resource_len(dev, 0));
+	pci_set_drvdata(dev, NULL);
+err_disable:
+	pci_disable_device(dev);
+err_freebg:
+	kfree(bg);
+
+	return err;
+}
+
+static void bt8xxgpio_remove(struct pci_dev *pdev)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+
+	gpiochip_remove(&bg->gpio);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(~0x0, BT848_INT_STAT);
+	bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+	iounmap(bg->mmio);
+	release_mem_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0));
+	pci_disable_device(pdev);
+
+	pci_set_drvdata(pdev, NULL);
+	kfree(bg);
+}
+
+#ifdef CONFIG_PM
+static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	bg->saved_outen = bgread(BT848_GPIO_OUT_EN);
+	bg->saved_data = bgread(BT848_GPIO_DATA);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(~0x0, BT848_INT_STAT);
+	bgwrite(0x0, BT848_GPIO_OUT_EN);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int bt8xxgpio_resume(struct pci_dev *pdev)
+{
+	struct bt8xxgpio *bg = pci_get_drvdata(pdev);
+	unsigned long flags;
+	int err;
+
+	pci_set_power_state(pdev, 0);
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+	pci_restore_state(pdev);
+
+	spin_lock_irqsave(&bg->lock, flags);
+
+	bgwrite(0, BT848_INT_MASK);
+	bgwrite(0, BT848_GPIO_DMA_CTL);
+	bgwrite(0, BT848_GPIO_REG_INP);
+	bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN);
+	bgwrite(bg->saved_data & bg->saved_outen,
+		BT848_GPIO_DATA);
+
+	spin_unlock_irqrestore(&bg->lock, flags);
+
+	return 0;
+}
+#else
+#define bt8xxgpio_suspend NULL
+#define bt8xxgpio_resume NULL
+#endif /* CONFIG_PM */
+
+static struct pci_device_id bt8xxgpio_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl);
+
+static struct pci_driver bt8xxgpio_pci_driver = {
+	.name		= "bt8xxgpio",
+	.id_table	= bt8xxgpio_pci_tbl,
+	.probe		= bt8xxgpio_probe,
+	.remove		= bt8xxgpio_remove,
+	.suspend	= bt8xxgpio_suspend,
+	.resume		= bt8xxgpio_resume,
+};
+
+static int __init bt8xxgpio_init(void)
+{
+	return pci_register_driver(&bt8xxgpio_pci_driver);
+}
+module_init(bt8xxgpio_init)
+
+static void __exit bt8xxgpio_exit(void)
+{
+	pci_unregister_driver(&bt8xxgpio_pci_driver);
+}
+module_exit(bt8xxgpio_exit)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Buesch");
+MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card");