diff options
author | Jason Gunthorpe <jgunthorpe@obsidianresearch.com> | 2017-02-01 12:48:45 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-02-10 15:20:44 +0100 |
commit | 425902f5c8e3034b2d9d7a714289d8d579c733b2 (patch) | |
tree | e21330c7880799f64abed26cf1c7737adb515fb1 /drivers/fpga | |
parent | baa6d396635129d8a67793e884f3b2182c7354b3 (diff) | |
download | linux-425902f5c8e3034b2d9d7a714289d8d579c733b2.tar.bz2 |
fpga zynq: Use the scatterlist interface
This allows the driver to avoid a high order coherent DMA allocation
and memory copy. With this patch it can DMA directly from the kernel
pages that the bitfile is stored in.
Since this is now a gather DMA operation the driver uses the ISR
to feed the chips DMA queue with each entry from the SGL.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/fpga')
-rw-r--r-- | drivers/fpga/zynq-fpga.c | 174 |
1 files changed, 135 insertions, 39 deletions
diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c index c3fc2a231e28..34cb98139442 100644 --- a/drivers/fpga/zynq-fpga.c +++ b/drivers/fpga/zynq-fpga.c @@ -30,6 +30,7 @@ #include <linux/pm.h> #include <linux/regmap.h> #include <linux/string.h> +#include <linux/scatterlist.h> /* Offsets into SLCR regmap */ @@ -80,6 +81,7 @@ /* FPGA init status */ #define STATUS_DMA_Q_F BIT(31) +#define STATUS_DMA_Q_E BIT(30) #define STATUS_PCFG_INIT_MASK BIT(4) /* Interrupt Status/Mask Register Bit definitions */ @@ -98,12 +100,16 @@ #define DMA_INVALID_ADDRESS GENMASK(31, 0) /* Used to unlock the dev */ #define UNLOCK_MASK 0x757bdf0d -/* Timeout for DMA to complete */ -#define DMA_DONE_TIMEOUT msecs_to_jiffies(1000) /* Timeout for polling reset bits */ #define INIT_POLL_TIMEOUT 2500000 /* Delay for polling reset bits */ #define INIT_POLL_DELAY 20 +/* Signal this is the last DMA transfer, wait for the AXI and PCAP before + * interrupting + */ +#define DMA_SRC_LAST_TRANSFER 1 +/* Timeout for DMA completion */ +#define DMA_TIMEOUT_MS 5000 /* Masks for controlling stuff in SLCR */ /* Disable all Level shifters */ @@ -124,6 +130,11 @@ struct zynq_fpga_priv { void __iomem *io_base; struct regmap *slcr; + spinlock_t dma_lock; + unsigned int dma_elm; + unsigned int dma_nelms; + struct scatterlist *cur_sg; + struct completion dma_done; }; @@ -149,13 +160,80 @@ static inline void zynq_fpga_set_irq(struct zynq_fpga_priv *priv, u32 enable) zynq_fpga_write(priv, INT_MASK_OFFSET, ~enable); } +/* Must be called with dma_lock held */ +static void zynq_step_dma(struct zynq_fpga_priv *priv) +{ + u32 addr; + u32 len; + bool first; + + first = priv->dma_elm == 0; + while (priv->cur_sg) { + /* Feed the DMA queue until it is full. */ + if (zynq_fpga_read(priv, STATUS_OFFSET) & STATUS_DMA_Q_F) + break; + + addr = sg_dma_address(priv->cur_sg); + len = sg_dma_len(priv->cur_sg); + if (priv->dma_elm + 1 == priv->dma_nelms) { + /* The last transfer waits for the PCAP to finish too, + * notice this also changes the irq_mask to ignore + * IXR_DMA_DONE_MASK which ensures we do not trigger + * the completion too early. + */ + addr |= DMA_SRC_LAST_TRANSFER; + priv->cur_sg = NULL; + } else { + priv->cur_sg = sg_next(priv->cur_sg); + priv->dma_elm++; + } + + zynq_fpga_write(priv, DMA_SRC_ADDR_OFFSET, addr); + zynq_fpga_write(priv, DMA_DST_ADDR_OFFSET, DMA_INVALID_ADDRESS); + zynq_fpga_write(priv, DMA_SRC_LEN_OFFSET, len / 4); + zynq_fpga_write(priv, DMA_DEST_LEN_OFFSET, 0); + } + + /* Once the first transfer is queued we can turn on the ISR, future + * calls to zynq_step_dma will happen from the ISR context. The + * dma_lock spinlock guarentees this handover is done coherently, the + * ISR enable is put at the end to avoid another CPU spinning in the + * ISR on this lock. + */ + if (first && priv->cur_sg) { + zynq_fpga_set_irq(priv, + IXR_DMA_DONE_MASK | IXR_ERROR_FLAGS_MASK); + } else if (!priv->cur_sg) { + /* The last transfer changes to DMA & PCAP mode since we do + * not want to continue until everything has been flushed into + * the PCAP. + */ + zynq_fpga_set_irq(priv, + IXR_D_P_DONE_MASK | IXR_ERROR_FLAGS_MASK); + } +} + static irqreturn_t zynq_fpga_isr(int irq, void *data) { struct zynq_fpga_priv *priv = data; + u32 intr_status; - /* disable DMA and error IRQs */ - zynq_fpga_set_irq(priv, 0); + /* If anything other than DMA completion is reported stop and hand + * control back to zynq_fpga_ops_write, something went wrong, + * otherwise progress the DMA. + */ + spin_lock(&priv->dma_lock); + intr_status = zynq_fpga_read(priv, INT_STS_OFFSET); + if (!(intr_status & IXR_ERROR_FLAGS_MASK) && + (intr_status & IXR_DMA_DONE_MASK) && priv->cur_sg) { + zynq_fpga_write(priv, INT_STS_OFFSET, IXR_DMA_DONE_MASK); + zynq_step_dma(priv); + spin_unlock(&priv->dma_lock); + return IRQ_HANDLED; + } + spin_unlock(&priv->dma_lock); + zynq_fpga_set_irq(priv, 0); complete(&priv->dma_done); return IRQ_HANDLED; @@ -266,10 +344,11 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, zynq_fpga_write(priv, CTRL_OFFSET, (CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK | ctrl)); - /* check that we have room in the command queue */ + /* We expect that the command queue is empty right now. */ status = zynq_fpga_read(priv, STATUS_OFFSET); - if (status & STATUS_DMA_Q_F) { - dev_err(&mgr->dev, "DMA command queue full\n"); + if ((status & STATUS_DMA_Q_F) || + (status & STATUS_DMA_Q_E) != STATUS_DMA_Q_E) { + dev_err(&mgr->dev, "DMA command queue not right\n"); err = -EBUSY; goto out_err; } @@ -288,27 +367,36 @@ out_err: return err; } -static int zynq_fpga_ops_write(struct fpga_manager *mgr, - const char *buf, size_t count) +static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt) { struct zynq_fpga_priv *priv; const char *why; int err; - char *kbuf; - size_t in_count; - dma_addr_t dma_addr; - u32 transfer_length; u32 intr_status; + unsigned long timeout; + unsigned long flags; + struct scatterlist *sg; + int i; - in_count = count; priv = mgr->priv; - kbuf = - dma_alloc_coherent(mgr->dev.parent, count, &dma_addr, GFP_KERNEL); - if (!kbuf) - return -ENOMEM; + /* The hardware can only DMA multiples of 4 bytes, and it requires the + * starting addresses to be aligned to 64 bits (UG585 pg 212). + */ + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + if ((sg->offset % 8) || (sg->length % 4)) { + dev_err(&mgr->dev, + "Invalid bitstream, chunks must be aligned\n"); + return -EINVAL; + } + } - memcpy(kbuf, buf, count); + priv->dma_nelms = + dma_map_sg(mgr->dev.parent, sgt->sgl, sgt->nents, DMA_TO_DEVICE); + if (priv->dma_nelms == 0) { + dev_err(&mgr->dev, "Unable to DMA map (TO_DEVICE)\n"); + return -ENOMEM; + } /* enable clock */ err = clk_enable(priv->clk); @@ -316,28 +404,31 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr, goto out_free; zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK); - reinit_completion(&priv->dma_done); - /* enable DMA and error IRQs */ - zynq_fpga_set_irq(priv, IXR_D_P_DONE_MASK | IXR_ERROR_FLAGS_MASK); - - /* the +1 in the src addr is used to hold off on DMA_DONE IRQ - * until both AXI and PCAP are done ... - */ - zynq_fpga_write(priv, DMA_SRC_ADDR_OFFSET, (u32)(dma_addr) + 1); - zynq_fpga_write(priv, DMA_DST_ADDR_OFFSET, (u32)DMA_INVALID_ADDRESS); - - /* convert #bytes to #words */ - transfer_length = (count + 3) / 4; + /* zynq_step_dma will turn on interrupts */ + spin_lock_irqsave(&priv->dma_lock, flags); + priv->dma_elm = 0; + priv->cur_sg = sgt->sgl; + zynq_step_dma(priv); + spin_unlock_irqrestore(&priv->dma_lock, flags); - zynq_fpga_write(priv, DMA_SRC_LEN_OFFSET, transfer_length); - zynq_fpga_write(priv, DMA_DEST_LEN_OFFSET, 0); + timeout = wait_for_completion_timeout(&priv->dma_done, + msecs_to_jiffies(DMA_TIMEOUT_MS)); - wait_for_completion(&priv->dma_done); + spin_lock_irqsave(&priv->dma_lock, flags); + zynq_fpga_set_irq(priv, 0); + priv->cur_sg = NULL; + spin_unlock_irqrestore(&priv->dma_lock, flags); intr_status = zynq_fpga_read(priv, INT_STS_OFFSET); - zynq_fpga_write(priv, INT_STS_OFFSET, intr_status); + zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK); + + /* There doesn't seem to be a way to force cancel any DMA, so if + * something went wrong we are relying on the hardware to have halted + * the DMA before we get here, if there was we could use + * wait_for_completion_interruptible too. + */ if (intr_status & IXR_ERROR_FLAGS_MASK) { why = "DMA reported error"; @@ -345,8 +436,12 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr, goto out_report; } - if (!((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) { - why = "DMA did not complete"; + if (priv->cur_sg || + !((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) { + if (timeout == 0) + why = "DMA timed out"; + else + why = "DMA did not complete"; err = -EIO; goto out_report; } @@ -369,7 +464,7 @@ out_clk: clk_disable(priv->clk); out_free: - dma_free_coherent(mgr->dev.parent, count, kbuf, dma_addr); + dma_unmap_sg(mgr->dev.parent, sgt->sgl, sgt->nents, DMA_TO_DEVICE); return err; } @@ -433,7 +528,7 @@ static const struct fpga_manager_ops zynq_fpga_ops = { .initial_header_size = 128, .state = zynq_fpga_ops_state, .write_init = zynq_fpga_ops_write_init, - .write = zynq_fpga_ops_write, + .write_sg = zynq_fpga_ops_write, .write_complete = zynq_fpga_ops_write_complete, }; @@ -447,6 +542,7 @@ static int zynq_fpga_probe(struct platform_device *pdev) priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; + spin_lock_init(&priv->dma_lock); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->io_base = devm_ioremap_resource(dev, res); |