firmware: ti_sci: extend clock identifiers from u8 to u32

Future SoCs are going to have more than 255 device clocks in certain cases,
and thus the API must be extended to support this. The support is done in
backwards compatible extension, in which the new u32 clock identifier
fields are only used if the existing u8 size clock identifier is set as
255. In all the other cases, the existing u8 clock identifier is used. As
the size of the messages sent / received is not verified for existing
devices / old firmware, increasing the size of the messages from the end
is also fine. Due to this reason, depending on ABI version isn't necessary
either.

Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>

1 files changed, 52 insertions, 11 deletions

diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index 4983827151bf..ad0b47981b87 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -202,7 +202,8 @@ struct ti_sci_msg_req_set_device_resets {
  * @dev_id:	Device identifier this request is for
  * @clk_id:	Clock identifier for the device for this request.
  *		Each device has it's own set of clock inputs. This indexes
- *		which clock input to modify.
+ *		which clock input to modify. Set to 255 if clock ID is
+ *		greater than or equal to 255.
  * @request_state: Request the state for the clock to be set to.
  *		MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock,
  *		it can be disabled, regardless of the state of the device
@@ -213,6 +214,9 @@ struct ti_sci_msg_req_set_device_resets {
  *		being required by the device.(default)
  *		MSG_CLOCK_SW_STATE_REQ:  Configure the clock to be enabled,
  *		regardless of the state of the device.
+ * @clk_id_32:	Clock identifier for the device for this request.
+ *		Only to be used if the clock ID is greater than or equal to
+ *		255.
  *
  * Normally, all required clocks are managed by TISCI entity, this is used
  * only for specific control *IF* required. Auto managed state is
@@ -234,6 +238,7 @@ struct ti_sci_msg_req_set_clock_state {
 #define MSG_CLOCK_SW_STATE_AUTO		1
 #define MSG_CLOCK_SW_STATE_REQ		2
 	u8 request_state;
+	u32 clk_id_32;
 } __packed;
 
 /**
@@ -242,7 +247,11 @@ struct ti_sci_msg_req_set_clock_state {
  * @dev_id:	Device identifier this request is for
  * @clk_id:	Clock identifier for the device for this request.
  *		Each device has it's own set of clock inputs. This indexes
- *		which clock input to get state of.
+ *		which clock input to get state of. Set to 255 if the clock
+ *		ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier for the device for the request.
+ *		Only to be used if the clock ID is greater than or equal to
+ *		255.
  *
  * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state
  * of the clock
@@ -251,6 +260,7 @@ struct ti_sci_msg_req_get_clock_state {
 	struct ti_sci_msg_hdr hdr;
 	u32 dev_id;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
@@ -278,9 +288,13 @@ struct ti_sci_msg_resp_get_clock_state {
  * @dev_id:	Device identifier this request is for
  * @clk_id:	Clock identifier for the device for this request.
  *		Each device has it's own set of clock inputs. This indexes
- *		which clock input to modify.
+ *		which clock input to modify. Set to 255 if clock ID is
+ *		greater than or equal to 255.
  * @parent_id:	The new clock parent is selectable by an index via this
- *		parameter.
+ *		parameter. Set to 255 if clock ID is greater than or
+ *		equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is 255.
+ * @parent_id_32:	Parent identifier if @parent_id is 255.
  *
  * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic
  * ACK / NACK message.
@@ -290,6 +304,8 @@ struct ti_sci_msg_req_set_clock_parent {
 	u32 dev_id;
 	u8 clk_id;
 	u8 parent_id;
+	u32 clk_id_32;
+	u32 parent_id_32;
 } __packed;
 
 /**
@@ -298,7 +314,10 @@ struct ti_sci_msg_req_set_clock_parent {
  * @dev_id:	Device identifier this request is for
  * @clk_id:	Clock identifier for the device for this request.
  *		Each device has it's own set of clock inputs. This indexes
- *		which clock input to get the parent for.
+ *		which clock input to get the parent for. If this field
+ *		contains 255, the actual clock identifier is stored in
+ *		@clk_id_32.
+ * @clk_id_32:	Clock identifier if the @clk_id field contains 255.
  *
  * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information
  */
@@ -306,25 +325,32 @@ struct ti_sci_msg_req_get_clock_parent {
 	struct ti_sci_msg_hdr hdr;
 	u32 dev_id;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
  * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent
  * @hdr:	Generic Header
- * @parent_id:	The current clock parent
+ * @parent_id:	The current clock parent. If set to 255, the current parent
+ *		ID can be found from the @parent_id_32 field.
+ * @parent_id_32:	Current clock parent if @parent_id field is set to
+ *			255.
  *
  * Response to TI_SCI_MSG_GET_CLOCK_PARENT.
  */
 struct ti_sci_msg_resp_get_clock_parent {
 	struct ti_sci_msg_hdr hdr;
 	u8 parent_id;
+	u32 parent_id_32;
 } __packed;
 
 /**
  * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents
  * @hdr:	Generic header
  * @dev_id:	Device identifier this request is for
- * @clk_id:	Clock identifier for the device for this request.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if the @clk_id field contains 255.
  *
  * This request provides information about how many clock parent options
  * are available for a given clock to a device. This is typically used
@@ -337,18 +363,24 @@ struct ti_sci_msg_req_get_clock_num_parents {
 	struct ti_sci_msg_hdr hdr;
 	u32 dev_id;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
  * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents
  * @hdr:		Generic header
- * @num_parents:	Number of clock parents
+ * @num_parents:	Number of clock parents. If set to 255, the actual
+ *			number of parents is stored into @num_parents_32
+ *			field instead.
+ * @num_parents_32:	Number of clock parents if @num_parents field is
+ *			set to 255.
  *
  * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS
  */
 struct ti_sci_msg_resp_get_clock_num_parents {
 	struct ti_sci_msg_hdr hdr;
 	u8 num_parents;
+	u32 num_parents_32;
 } __packed;
 
 /**
@@ -363,7 +395,9 @@ struct ti_sci_msg_resp_get_clock_num_parents {
  * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
  *		allowable programmed frequency and does not account for clock
  *		tolerances and jitter.
- * @clk_id:	Clock identifier for the device for this request.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock identifier is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id is set to 255.
  *
  * NOTE: Normally clock frequency management is automatically done by TISCI
  * entity. In case of specific requests, TISCI evaluates capability to achieve
@@ -380,6 +414,7 @@ struct ti_sci_msg_req_query_clock_freq {
 	u64 target_freq_hz;
 	u64 max_freq_hz;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
@@ -407,7 +442,9 @@ struct ti_sci_msg_resp_query_clock_freq {
  * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
  *		allowable programmed frequency and does not account for clock
  *		tolerances and jitter.
- * @clk_id:	Clock identifier for the device for this request.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is set to 255.
  *
  * NOTE: Normally clock frequency management is automatically done by TISCI
  * entity. In case of specific requests, TISCI evaluates capability to achieve
@@ -436,13 +473,16 @@ struct ti_sci_msg_req_set_clock_freq {
 	u64 target_freq_hz;
 	u64 max_freq_hz;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**
  * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency
  * @hdr:	Generic Header
  * @dev_id:	Device identifier this request is for
- * @clk_id:	Clock identifier for the device for this request.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is set to 255.
  *
  * NOTE: Normally clock frequency management is automatically done by TISCI
  * entity. In some cases, clock frequencies are configured by host.
@@ -454,6 +494,7 @@ struct ti_sci_msg_req_get_clock_freq {
 	struct ti_sci_msg_hdr hdr;
 	u32 dev_id;
 	u8 clk_id;
+	u32 clk_id_32;
 } __packed;
 
 /**