summaryrefslogtreecommitdiffstats
path: root/drivers/extcon/extcon-max77693.c
diff options
context:
space:
mode:
authorChanwoo Choi <cw00.choi@samsung.com>2012-11-27 11:30:35 +0900
committerChanwoo Choi <cw00.choi@samsung.com>2013-01-15 15:42:15 +0900
commit06bed0afa24e98b9afa26456c6bed37a6510f7d1 (patch)
treed4d4bc2f8da8a15171c34fe516849f9ab808b158 /drivers/extcon/extcon-max77693.c
parent154f757fd315270e42bd17f4a68d84bd070e5758 (diff)
downloadlinux-06bed0afa24e98b9afa26456c6bed37a6510f7d1.tar.bz2
extcon: max77693: Add support MHL_TA cable for charging battery
This patch support MHL_TA cable for charging battery. The MHL_TA cable include MHL with TA cable or MHL with micro USB cable. When MHL with TA/USB cable is attached, extcon-max77693 driver detect two interrupt for handling precise operation according to each cable (MHL and TA/USB cable). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Diffstat (limited to 'drivers/extcon/extcon-max77693.c')
-rw-r--r--drivers/extcon/extcon-max77693.c56
1 files changed, 45 insertions, 11 deletions
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index e84d5dc06798..78dc7505b965 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -136,9 +136,11 @@ enum max77693_muic_acc_type {
/* The below accessories have same ADC value so ADCLow and
ADC1K bit is used to separate specific accessory */
- MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, ADCLow:0, ADC1K:0 */
- MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, ADCLow:1, ADC1K:0 */
- MAX77693_MUIC_GND_MHL_CABLE = 0x103, /* ADC:0x0, ADCLow:1, ADC1K:1 */
+ MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, VBVolot:0, ADCLow:0, ADC1K:0 */
+ MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* ADC:0x0, VBVolot:1, ADCLow:0, ADC1K:0 */
+ MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:0 */
+ MAX77693_MUIC_GND_MHL = 0x103, /* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:1 */
+ MAX77693_MUIC_GND_MHL_VB = 0x107, /* ADC:0x0, VBVolot:1, ADCLow:1, ADC1K:1 */
};
/* MAX77693 MUIC device support below list of accessories(external connector) */
@@ -150,6 +152,7 @@ enum {
EXTCON_CABLE_SLOW_CHARGER,
EXTCON_CABLE_CHARGE_DOWNSTREAM,
EXTCON_CABLE_MHL,
+ EXTCON_CABLE_MHL_TA,
EXTCON_CABLE_AUDIO_VIDEO_LOAD,
EXTCON_CABLE_AUDIO_VIDEO_NOLOAD,
EXTCON_CABLE_JIG,
@@ -165,6 +168,7 @@ const char *max77693_extcon_cable[] = {
[EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
[EXTCON_CABLE_MHL] = "MHL",
+ [EXTCON_CABLE_MHL_TA] = "MHL_TA",
[EXTCON_CABLE_AUDIO_VIDEO_LOAD] = "Audio-video-load",
[EXTCON_CABLE_AUDIO_VIDEO_NOLOAD] = "Audio-video-noload",
[EXTCON_CABLE_JIG] = "JIG",
@@ -330,6 +334,7 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
/**
* [0x1][VBVolt][ADCLow][ADC1K]
* [0x1 0 0 0 ] : USB_OTG
+ * [0x1 1 0 0 ] : USB_OTG_VB
* [0x1 0 1 0 ] : Audio Video Cable with load
* [0x1 0 1 1 ] : MHL without charging connector
* [0x1 1 1 1 ] : MHL with charging connector
@@ -414,22 +419,24 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
switch (cable_type_gnd) {
case MAX77693_MUIC_GND_USB_OTG:
- /* USB_OTG */
+ case MAX77693_MUIC_GND_USB_OTG_VB:
+ /* USB_OTG, PATH: AP_USB */
ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
if (ret < 0)
goto out;
extcon_set_cable_state(info->edev, "USB-Host", attached);
break;
case MAX77693_MUIC_GND_AV_CABLE_LOAD:
- /* Audio Video Cable with load */
+ /* Audio Video Cable with load, PATH:AUDIO */
ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
if (ret < 0)
goto out;
extcon_set_cable_state(info->edev,
"Audio-video-load", attached);
break;
- case MAX77693_MUIC_GND_MHL_CABLE:
- /* MHL */
+ case MAX77693_MUIC_GND_MHL:
+ case MAX77693_MUIC_GND_MHL_VB:
+ /* MHL or MHL with USB/TA cable */
extcon_set_cable_state(info->edev, "MHL", attached);
break;
default:
@@ -528,7 +535,9 @@ out:
static int max77693_muic_chg_handler(struct max77693_muic_info *info)
{
int chg_type;
+ int cable_type_gnd;
bool attached;
+ bool cable_attached;
int ret = 0;
chg_type = max77693_muic_get_cable_type(info,
@@ -541,10 +550,35 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
switch (chg_type) {
case MAX77693_CHARGER_TYPE_USB:
- ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
- if (ret < 0)
- goto out;
- extcon_set_cable_state(info->edev, "USB", attached);
+ cable_type_gnd = max77693_muic_get_cable_type(info,
+ MAX77693_CABLE_GROUP_ADC_GND,
+ &cable_attached);
+
+ switch (cable_type_gnd) {
+ case MAX77693_MUIC_GND_MHL:
+ case MAX77693_MUIC_GND_MHL_VB:
+ /*
+ * USB/TA with MHL cable
+ * - MHL cable, which connect micro USB or TA cable,
+ * is used to charging battery. So, extcon driver check
+ * charging type whether micro USB or TA cable is
+ * connected to MHL cable when extcon driver detect MHL
+ * cable.
+ */
+ extcon_set_cable_state(info->edev, "MHL_TA", attached);
+
+ if (!cable_attached)
+ extcon_set_cable_state(info->edev,
+ "MHL", false);
+ break;
+ default:
+ /* Only USB cable, PATH:AP_USB */
+ ret = max77693_muic_set_path(info, CONTROL1_SW_USB,
+ attached);
+ if (ret < 0)
+ goto out;
+ extcon_set_cable_state(info->edev, "USB", attached);
+ }
break;
case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
extcon_set_cable_state(info->edev,