EDAC/amd64: Add new register offset support and related changes

Introduce a "family flags" bitmask that can be used to indicate any
special behavior needed on a per-family basis.

Add a flag to indicate a system uses the new register offsets introduced
with Family 19h Model 10h.

Use this flag to account for register offset changes, a new bitfield
indicating DDR5 use on a memory controller, and to set the proper number
of chip select masks.

Rework f17_addr_mask_to_cs_size() to properly handle the change in chip
select masks. And update code comments to reflect the updated Chip
Select, DIMM, and Mask relationships.

[uninitialized variable warning]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: William Roche <william.roche@oracle.com>
Link: https://lore.kernel.org/r/20220202144307.2678405-3-yazen.ghannam@amd.com

1 files changed, 64 insertions, 16 deletions

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 388b072daa94..812baa48b290 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -15,6 +15,21 @@ static struct msr __percpu *msrs;
 
 static struct amd64_family_type *fam_type;
 
+static inline u32 get_umc_reg(u32 reg)
+{
+	if (!fam_type->flags.zn_regs_v2)
+		return reg;
+
+	switch (reg) {
+	case UMCCH_ADDR_CFG:		return UMCCH_ADDR_CFG_DDR5;
+	case UMCCH_ADDR_MASK_SEC:	return UMCCH_ADDR_MASK_SEC_DDR5;
+	case UMCCH_DIMM_CFG:		return UMCCH_DIMM_CFG_DDR5;
+	}
+
+	WARN_ONCE(1, "%s: unknown register 0x%x", __func__, reg);
+	return 0;
+}
+
 /* Per-node stuff */
 static struct ecc_settings **ecc_stngs;
 
@@ -1429,8 +1444,10 @@ static void __dump_misc_regs_df(struct amd64_pvt *pvt)
 		edac_dbg(1, "UMC%d x16 DIMMs present: %s\n",
 				i, (umc->dimm_cfg & BIT(7)) ? "yes" : "no");
 
-		if (umc->dram_type == MEM_LRDDR4) {
-			amd_smn_read(pvt->mc_node_id, umc_base + UMCCH_ADDR_CFG, &tmp);
+		if (umc->dram_type == MEM_LRDDR4 || umc->dram_type == MEM_LRDDR5) {
+			amd_smn_read(pvt->mc_node_id,
+				     umc_base + get_umc_reg(UMCCH_ADDR_CFG),
+				     &tmp);
 			edac_dbg(1, "UMC%d LRDIMM %dx rank multiply\n",
 					i, 1 << ((tmp >> 4) & 0x3));
 		}
@@ -1505,7 +1522,7 @@ static void prep_chip_selects(struct amd64_pvt *pvt)
 
 		for_each_umc(umc) {
 			pvt->csels[umc].b_cnt = 4;
-			pvt->csels[umc].m_cnt = 2;
+			pvt->csels[umc].m_cnt = fam_type->flags.zn_regs_v2 ? 4 : 2;
 		}
 
 	} else {
@@ -1545,7 +1562,7 @@ static void read_umc_base_mask(struct amd64_pvt *pvt)
 		}
 
 		umc_mask_reg = get_umc_base(umc) + UMCCH_ADDR_MASK;
-		umc_mask_reg_sec = get_umc_base(umc) + UMCCH_ADDR_MASK_SEC;
+		umc_mask_reg_sec = get_umc_base(umc) + get_umc_reg(UMCCH_ADDR_MASK_SEC);
 
 		for_each_chip_select_mask(cs, umc, pvt) {
 			mask = &pvt->csels[umc].csmasks[cs];
@@ -1629,12 +1646,25 @@ static void determine_memory_type_df(struct amd64_pvt *pvt)
 			continue;
 		}
 
-		if (umc->dimm_cfg & BIT(5))
-			umc->dram_type = MEM_LRDDR4;
-		else if (umc->dimm_cfg & BIT(4))
-			umc->dram_type = MEM_RDDR4;
-		else
-			umc->dram_type = MEM_DDR4;
+		/*
+		 * Check if the system supports the "DDR Type" field in UMC Config
+		 * and has DDR5 DIMMs in use.
+		 */
+		if (fam_type->flags.zn_regs_v2 && ((umc->umc_cfg & GENMASK(2, 0)) == 0x1)) {
+			if (umc->dimm_cfg & BIT(5))
+				umc->dram_type = MEM_LRDDR5;
+			else if (umc->dimm_cfg & BIT(4))
+				umc->dram_type = MEM_RDDR5;
+			else
+				umc->dram_type = MEM_DDR5;
+		} else {
+			if (umc->dimm_cfg & BIT(5))
+				umc->dram_type = MEM_LRDDR4;
+			else if (umc->dimm_cfg & BIT(4))
+				umc->dram_type = MEM_RDDR4;
+			else
+				umc->dram_type = MEM_DDR4;
+		}
 
 		edac_dbg(1, "  UMC%d DIMM type: %s\n", i, edac_mem_types[umc->dram_type]);
 	}
@@ -2166,6 +2196,7 @@ static int f17_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc,
 {
 	u32 addr_mask_orig, addr_mask_deinterleaved;
 	u32 msb, weight, num_zero_bits;
+	int cs_mask_nr = csrow_nr;
 	int dimm, size = 0;
 
 	/* No Chip Selects are enabled. */
@@ -2181,17 +2212,33 @@ static int f17_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc,
 		return size;
 
 	/*
-	 * There is one mask per DIMM, and two Chip Selects per DIMM.
-	 *	CS0 and CS1 -> DIMM0
-	 *	CS2 and CS3 -> DIMM1
+	 * Family 17h introduced systems with one mask per DIMM,
+	 * and two Chip Selects per DIMM.
+	 *
+	 *	CS0 and CS1 -> MASK0 / DIMM0
+	 *	CS2 and CS3 -> MASK1 / DIMM1
+	 *
+	 * Family 19h Model 10h introduced systems with one mask per Chip Select,
+	 * and two Chip Selects per DIMM.
+	 *
+	 *	CS0 -> MASK0 -> DIMM0
+	 *	CS1 -> MASK1 -> DIMM0
+	 *	CS2 -> MASK2 -> DIMM1
+	 *	CS3 -> MASK3 -> DIMM1
+	 *
+	 * Keep the mask number equal to the Chip Select number for newer systems,
+	 * and shift the mask number for older systems.
 	 */
 	dimm = csrow_nr >> 1;
 
+	if (!fam_type->flags.zn_regs_v2)
+		cs_mask_nr >>= 1;
+
 	/* Asymmetric dual-rank DIMM support. */
 	if ((csrow_nr & 1) && (cs_mode & CS_ODD_SECONDARY))
-		addr_mask_orig = pvt->csels[umc].csmasks_sec[dimm];
+		addr_mask_orig = pvt->csels[umc].csmasks_sec[cs_mask_nr];
 	else
-		addr_mask_orig = pvt->csels[umc].csmasks[dimm];
+		addr_mask_orig = pvt->csels[umc].csmasks[cs_mask_nr];
 
 	/*
 	 * The number of zero bits in the mask is equal to the number of bits
@@ -2947,6 +2994,7 @@ static struct amd64_family_type family_types[] = {
 		.f0_id = PCI_DEVICE_ID_AMD_19H_M10H_DF_F0,
 		.f6_id = PCI_DEVICE_ID_AMD_19H_M10H_DF_F6,
 		.max_mcs = 12,
+		.flags.zn_regs_v2 = 1,
 		.ops = {
 			.early_channel_count	= f17_early_channel_count,
 			.dbam_to_cs		= f17_addr_mask_to_cs_size,
@@ -3385,7 +3433,7 @@ static void __read_mc_regs_df(struct amd64_pvt *pvt)
 		umc_base = get_umc_base(i);
 		umc = &pvt->umc[i];
 
-		amd_smn_read(nid, umc_base + UMCCH_DIMM_CFG, &umc->dimm_cfg);
+		amd_smn_read(nid, umc_base + get_umc_reg(UMCCH_DIMM_CFG), &umc->dimm_cfg);
 		amd_smn_read(nid, umc_base + UMCCH_UMC_CFG, &umc->umc_cfg);
 		amd_smn_read(nid, umc_base + UMCCH_SDP_CTRL, &umc->sdp_ctrl);
 		amd_smn_read(nid, umc_base + UMCCH_ECC_CTRL, &umc->ecc_ctrl);