diff options
| author | Gerald Baeza <gerald.baeza@stericsson.com> | 2012-09-21 21:21:37 +0200 |
|---|---|---|
| committer | Fabio Baltieri <fabio.baltieri@linaro.org> | 2013-01-14 10:50:44 +0100 |
| commit | 47db92f4a63499b1605b4c66f9347ba5479e7b19 (patch) | |
| tree | a3e9510a1b3cec21147f11641f09bd984c2afb0a /drivers/dma | |
| parent | f000df8c5a0e2002acc5989aad99a97d32a24718 (diff) | |
| download | linux-47db92f4a63499b1605b4c66f9347ba5479e7b19.tar.bz2 | |
dmaengine: ste_dma40: physical channels number correction
DMAC_ICFG[0:2]=SCHNB only allows to count 'multiple of 4' physical
channels so it was ok with platforms having 8 channels but cannot be
used for next versions (with 10 or 14 channels). This patch allows to
provide the number of physical channels for a DMA device via
platform_data, or still rely on SCHNB if platform_data announces 0
channel.
Signed-off-by: Gerald Baeza <gerald.baeza@stericsson.com>
Reviewed-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Diffstat (limited to 'drivers/dma')
| -rw-r--r-- | drivers/dma/ste_dma40.c | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 5feab7db9449..ca18117def0a 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -3004,14 +3004,21 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) * ? has revision 1 * DB8500v1 has revision 2 * DB8500v2 has revision 3 + * AP9540v1 has revision 4 + * DB8540v1 has revision 4 */ rev = AMBA_REV_BITS(pid); + plat_data = pdev->dev.platform_data; + /* The number of physical channels on this HW */ - num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; + if (plat_data->num_of_phy_chans) + num_phy_chans = plat_data->num_of_phy_chans; + else + num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; - dev_info(&pdev->dev, "hardware revision: %d @ 0x%x\n", - rev, res->start); + dev_info(&pdev->dev, "hardware revision: %d @ 0x%x with %d physical channels\n", + rev, res->start, num_phy_chans); if (rev < 2) { d40_err(&pdev->dev, "hardware revision: %d is not supported", @@ -3019,8 +3026,6 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) goto failure; } - plat_data = pdev->dev.platform_data; - /* Count the number of logical channels in use */ for (i = 0; i < plat_data->dev_len; i++) if (plat_data->dev_rx[i] != 0) |