Merge branch 'arm-next' of git://git.xilinx.com/linux-xlnx into next/cleanup

From Michal Simek:

* 'arm-next' of git://git.xilinx.com/linux-xlnx:
  zynq: move static peripheral mappings
  zynq: remove use of CLKDEV_LOOKUP
  zynq: use pl310 device tree bindings
  zynq: use GIC device tree bindings
  + Linux 3.7-rc3

4 files changed, 29 insertions, 8 deletions

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 677cd6e4e1a1..d4c12180c654 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -90,6 +90,17 @@ config DW_DMAC
 	  Support the Synopsys DesignWare AHB DMA controller.  This
 	  can be integrated in chips such as the Atmel AT32ap7000.
 
+config DW_DMAC_BIG_ENDIAN_IO
+	bool "Use big endian I/O register access"
+	default y if AVR32
+	depends on DW_DMAC
+	help
+	  Say yes here to use big endian I/O access when reading and writing
+	  to the DMA controller registers. This is needed on some platforms,
+	  like the Atmel AVR32 architecture.
+
+	  If unsure, use the default setting.
+
 config AT_HDMAC
 	tristate "Atmel AHB DMA support"
 	depends on ARCH_AT91
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index ff39fa6cd2bc..88965597b7d0 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -98,9 +98,17 @@ struct dw_dma_regs {
 	u32	DW_PARAMS;
 };
 
+#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
+#define dma_readl_native ioread32be
+#define dma_writel_native iowrite32be
+#else
+#define dma_readl_native readl
+#define dma_writel_native writel
+#endif
+
 /* To access the registers in early stage of probe */
 #define dma_read_byaddr(addr, name) \
-	readl((addr) + offsetof(struct dw_dma_regs, name))
+	dma_readl_native((addr) + offsetof(struct dw_dma_regs, name))
 
 /* Bitfields in DW_PARAMS */
 #define DW_PARAMS_NR_CHAN	8		/* number of channels */
@@ -216,9 +224,9 @@ __dwc_regs(struct dw_dma_chan *dwc)
 }
 
 #define channel_readl(dwc, name) \
-	readl(&(__dwc_regs(dwc)->name))
+	dma_readl_native(&(__dwc_regs(dwc)->name))
 #define channel_writel(dwc, name, val) \
-	writel((val), &(__dwc_regs(dwc)->name))
+	dma_writel_native((val), &(__dwc_regs(dwc)->name))
 
 static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
 {
@@ -246,9 +254,9 @@ static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
 }
 
 #define dma_readl(dw, name) \
-	readl(&(__dw_regs(dw)->name))
+	dma_readl_native(&(__dw_regs(dw)->name))
 #define dma_writel(dw, name, val) \
-	writel((val), &(__dw_regs(dw)->name))
+	dma_writel_native((val), &(__dw_regs(dw)->name))
 
 #define channel_set_bit(dw, reg, mask) \
 	dma_writel(dw, reg, ((mask) << 8) | (mask))
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index a3a8270e76fb..dbf0e6f8de8a 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -513,8 +513,10 @@ static int imxdma_xfer_desc(struct imxdma_desc *d)
 			slot = i;
 			break;
 		}
-		if (slot < 0)
+		if (slot < 0) {
+			spin_unlock_irqrestore(&imxdma->lock, flags);
 			return -EBUSY;
+		}
 
 		imxdma->slots_2d[slot].xsr = d->x;
 		imxdma->slots_2d[slot].ysr = d->y;
diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c
index 64385cde044b..d451caace806 100644
--- a/drivers/dma/sirf-dma.c
+++ b/drivers/dma/sirf-dma.c
@@ -109,7 +109,7 @@ static void sirfsoc_dma_execute(struct sirfsoc_dma_chan *schan)
 	sdesc = list_first_entry(&schan->queued, struct sirfsoc_dma_desc,
 		node);
 	/* Move the first queued descriptor to active list */
-	list_move_tail(&schan->queued, &schan->active);
+	list_move_tail(&sdesc->node, &schan->active);
 
 	/* Start the DMA transfer */
 	writel_relaxed(sdesc->width, sdma->base + SIRFSOC_DMA_WIDTH_0 +
@@ -428,7 +428,7 @@ static struct dma_async_tx_descriptor *sirfsoc_dma_prep_interleaved(
 	unsigned long iflags;
 	int ret;
 
-	if ((xt->dir != DMA_MEM_TO_DEV) || (xt->dir != DMA_DEV_TO_MEM)) {
+	if ((xt->dir != DMA_MEM_TO_DEV) && (xt->dir != DMA_DEV_TO_MEM)) {
 		ret = -EINVAL;
 		goto err_dir;
 	}