diff options
author | Martin Sperl <kernel@martin.sperl.org> | 2016-03-16 12:24:56 -0700 |
---|---|---|
committer | Vinod Koul <vinod.koul@intel.com> | 2016-04-15 09:57:21 +0530 |
commit | a1d71ba90c68a5dfd87dd4c1a6386cef017d9ecb (patch) | |
tree | 82e50387c1ded2fea5c47a27e703e72d2b0da0f2 /drivers/dma/bcm2835-dma.c | |
parent | 0fa5867e6a2c6119fac35b8b710bec87b4598940 (diff) | |
download | linux-a1d71ba90c68a5dfd87dd4c1a6386cef017d9ecb.tar.bz2 |
dmaengine: bcm2835: remove unnecessary masking of dma channels
The original patch contained 3 dma channels that were masked out.
These - as far as research and discussions show - are a
artefacts remaining from the downstream legacy dma-api.
Right now down-stream still includes a legacy api used only
in a single (downstream only) driver (bcm2708_fb) that requires
2D DMA for speedup (DMA-channel 0).
Formerly the sd-card support driver also was using this legacy
api (DMA-channel 2), but since has been moved over to use
dmaengine directly.
The DMA-channel 3 is already masked out in the devicetree in
the default property "brcm,dma-channel-mask = <0x7f35>;"
So we can remove the whole masking of DMA channels.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Diffstat (limited to 'drivers/dma/bcm2835-dma.c')
-rw-r--r-- | drivers/dma/bcm2835-dma.c | 9 |
1 files changed, 0 insertions, 9 deletions
diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c index 2d72fe81243f..e4ca980049ba 100644 --- a/drivers/dma/bcm2835-dma.c +++ b/drivers/dma/bcm2835-dma.c @@ -123,9 +123,6 @@ struct bcm2835_desc { #define BCM2835_DMA_DATA_TYPE_S32 4 #define BCM2835_DMA_DATA_TYPE_S128 16 -#define BCM2835_DMA_BULK_MASK BIT(0) -#define BCM2835_DMA_FIQ_MASK (BIT(2) | BIT(3)) - /* Valid only for channels 0 - 14, 15 has its own base address */ #define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */ #define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n)) @@ -641,12 +638,6 @@ static int bcm2835_dma_probe(struct platform_device *pdev) goto err_no_dma; } - /* - * Do not use the FIQ and BULK channels, - * because they are used by the GPU. - */ - chans_available &= ~(BCM2835_DMA_FIQ_MASK | BCM2835_DMA_BULK_MASK); - for (i = 0; i < pdev->num_resources; i++) { irq = platform_get_irq(pdev, i); if (irq < 0) |