dmaengine: at_hdmac: add slave config operation

This patch introduces DMA_SLAVE_CONFIG to at_hdmac Atmel DMA driver.

It is needed to fix a regression in the use of atmel-mci.c driver on Atmel
AT91 platforms brouth by e2b35f3:
"dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes"

We remove some parts of the private structure "at_dma_slave" and use the
information provided by "struct dma_slave_config": source/destination
peripheral registers and access width.

AT_DMA_SLAVE_WIDTH_* values used previously are not needed anymore as we
now use the standard ones. Although some conversion functions are needed to
match register expected values.

Some AT91 sub-architecture specific files are slightly touched by this patch
but it cannot be split because it can break compilation.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

1 files changed, 32 insertions, 0 deletions

diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 08fd8a0ae797..897a8bcaec90 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -207,6 +207,7 @@ enum atc_status {
  * @save_cfg: configuration register that is saved on suspend/resume cycle
  * @save_dscr: for cyclic operations, preserve next descriptor address in
  *             the cyclic list on suspend/resume cycle
+ * @dma_sconfig: configuration for slave transfers, passed via DMA_SLAVE_CONFIG
  * @lock: serializes enqueue/dequeue operations to descriptors lists
  * @active_list: list of descriptors dmaengine is being running on
  * @queue: list of descriptors ready to be submitted to engine
@@ -222,6 +223,7 @@ struct at_dma_chan {
 	struct tasklet_struct	tasklet;
 	u32			save_cfg;
 	u32			save_dscr;
+	struct dma_slave_config dma_sconfig;
 
 	spinlock_t		lock;
 
@@ -243,6 +245,36 @@ static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
 	return container_of(dchan, struct at_dma_chan, chan_common);
 }
 
+/*
+ * Fix sconfig's burst size according to at_hdmac. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3, 32 -> 4, 64 -> 5, 128 -> 6, 256 -> 7.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline void convert_burst(u32 *maxburst)
+{
+	if (*maxburst > 1)
+		*maxburst = fls(*maxburst) - 2;
+	else
+		*maxburst = 0;
+}
+
+/*
+ * Fix sconfig's bus width according to at_hdmac.
+ * 1 byte -> 0, 2 bytes -> 1, 4 bytes -> 2.
+ */
+static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width)
+{
+	switch (addr_width) {
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+		return 1;
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		return 2;
+	default:
+		/* For 1 byte width or fallback */
+		return 0;
+	}
+}
 
 /*--  Controller  ------------------------------------------------------*/