diff options
| author | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2018-03-27 23:58:45 +0200 |
|---|---|---|
| committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2018-03-29 13:06:08 +0200 |
| commit | 4dc2375c1a4e88ed2701f6961e0e4f9a7696ad3c (patch) | |
| tree | 926f002833a8fc9afe9aaae3bc71114c43f9b0b7 /drivers/cpuidle | |
| parent | 64bdff698092aa6be28c3b248f887022eec77902 (diff) | |
| download | linux-4dc2375c1a4e88ed2701f6961e0e4f9a7696ad3c.tar.bz2 | |
cpuidle: poll_state: Avoid invoking local_clock() too often
Rik reports that he sees an increase in CPU use in one benchmark
due to commit 612f1a22f067 "cpuidle: poll_state: Add time limit to
poll_idle()" that caused poll_idle() to call local_clock() in every
iteration of the loop. Utilization increase generally means more
non-idle time with respect to total CPU time (on the average) which
implies reduced CPU frequency.
Doug reports that limiting the rate of local_clock() invocations
in there causes much less power to be drawn during a CPU-intensive
parallel workload (with idle states 1 and 2 disabled to enforce more
state 0 residency).
These two reports together suggest that executing local_clock() on
multiple CPUs in parallel at a high rate may cause chips to get hot
and trigger thermal/power limits on them to kick in, so reduce the
rate of local_clock() invocations in poll_idle() to avoid that issue.
Fixes: 612f1a22f067 "cpuidle: poll_state: Add time limit to poll_idle()"
Reported-by: Rik van Riel <riel@surriel.com>
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Diffstat (limited to 'drivers/cpuidle')
| -rw-r--r-- | drivers/cpuidle/poll_state.c | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/cpuidle/poll_state.c b/drivers/cpuidle/poll_state.c index 68cdc506524b..3f86d23c592e 100644 --- a/drivers/cpuidle/poll_state.c +++ b/drivers/cpuidle/poll_state.c @@ -10,6 +10,7 @@ #include <linux/sched/idle.h> #define POLL_IDLE_TIME_LIMIT (TICK_NSEC / 16) +#define POLL_IDLE_RELAX_COUNT 200 static int __cpuidle poll_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -18,9 +19,14 @@ static int __cpuidle poll_idle(struct cpuidle_device *dev, local_irq_enable(); if (!current_set_polling_and_test()) { + unsigned int loop_count = 0; + while (!need_resched()) { cpu_relax(); + if (loop_count++ < POLL_IDLE_RELAX_COUNT) + continue; + loop_count = 0; if (local_clock() - time_start > POLL_IDLE_TIME_LIMIT) break; } |