Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

2 files changed, 58 insertions, 58 deletions

diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index e1eb11ee3570..0a9b6a093646 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -102,7 +102,7 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
-obj-$(CONFIG_LOONGSON1_CPUFREQ)		+= ls1x-cpufreq.o
+obj-$(CONFIG_LOONGSON1_CPUFREQ)		+= loongson1-cpufreq.o
 obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
 obj-$(CONFIG_SPARC_US2E_CPUFREQ)	+= sparc-us2e-cpufreq.o
 obj-$(CONFIG_SPARC_US3_CPUFREQ)		+= sparc-us3-cpufreq.o
diff --git a/drivers/cpufreq/ls1x-cpufreq.c b/drivers/cpufreq/loongson1-cpufreq.c
index 262581b3318d..be89416e2358 100644
--- a/drivers/cpufreq/ls1x-cpufreq.c
+++ b/drivers/cpufreq/loongson1-cpufreq.c
@@ -1,7 +1,7 @@
 /*
  * CPU Frequency Scaling for Loongson 1 SoC
  *
- * Copyright (C) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ * Copyright (C) 2014-2016 Zhang, Keguang <keguang.zhang@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -20,7 +20,7 @@
 #include <cpufreq.h>
 #include <loongson1.h>
 
-static struct {
+struct ls1x_cpufreq {
 	struct device *dev;
 	struct clk *clk;	/* CPU clk */
 	struct clk *mux_clk;	/* MUX of CPU clk */
@@ -28,7 +28,9 @@ static struct {
 	struct clk *osc_clk;	/* OSC clk */
 	unsigned int max_freq;
 	unsigned int min_freq;
-} ls1x_cpufreq;
+};
+
+static struct ls1x_cpufreq *cpufreq;
 
 static int ls1x_cpufreq_notifier(struct notifier_block *nb,
 				 unsigned long val, void *data)
@@ -46,6 +48,7 @@ static struct notifier_block ls1x_cpufreq_notifier_block = {
 static int ls1x_cpufreq_target(struct cpufreq_policy *policy,
 			       unsigned int index)
 {
+	struct device *cpu_dev = get_cpu_device(policy->cpu);
 	unsigned int old_freq, new_freq;
 
 	old_freq = policy->cur;
@@ -60,53 +63,49 @@ static int ls1x_cpufreq_target(struct cpufreq_policy *policy,
 	 *  - Reparent CPU clk back to CPU DIV clk
 	 */
 
-	dev_dbg(ls1x_cpufreq.dev, "%u KHz --> %u KHz\n", old_freq, new_freq);
-	clk_set_parent(policy->clk, ls1x_cpufreq.osc_clk);
+	clk_set_parent(policy->clk, cpufreq->osc_clk);
 	__raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) | RST_CPU_EN | RST_CPU,
 		     LS1X_CLK_PLL_DIV);
 	__raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) & ~(RST_CPU_EN | RST_CPU),
 		     LS1X_CLK_PLL_DIV);
-	clk_set_rate(ls1x_cpufreq.mux_clk, new_freq * 1000);
-	clk_set_parent(policy->clk, ls1x_cpufreq.mux_clk);
+	clk_set_rate(cpufreq->mux_clk, new_freq * 1000);
+	clk_set_parent(policy->clk, cpufreq->mux_clk);
+	dev_dbg(cpu_dev, "%u KHz --> %u KHz\n", old_freq, new_freq);
 
 	return 0;
 }
 
 static int ls1x_cpufreq_init(struct cpufreq_policy *policy)
 {
+	struct device *cpu_dev = get_cpu_device(policy->cpu);
 	struct cpufreq_frequency_table *freq_tbl;
 	unsigned int pll_freq, freq;
 	int steps, i, ret;
 
-	pll_freq = clk_get_rate(ls1x_cpufreq.pll_clk) / 1000;
+	pll_freq = clk_get_rate(cpufreq->pll_clk) / 1000;
 
 	steps = 1 << DIV_CPU_WIDTH;
-	freq_tbl = kzalloc(sizeof(*freq_tbl) * steps, GFP_KERNEL);
-	if (!freq_tbl) {
-		dev_err(ls1x_cpufreq.dev,
-			"failed to alloc cpufreq_frequency_table\n");
-		ret = -ENOMEM;
-		goto out;
-	}
+	freq_tbl = kcalloc(steps, sizeof(*freq_tbl), GFP_KERNEL);
+	if (!freq_tbl)
+		return -ENOMEM;
 
 	for (i = 0; i < (steps - 1); i++) {
 		freq = pll_freq / (i + 1);
-		if ((freq < ls1x_cpufreq.min_freq) ||
-		    (freq > ls1x_cpufreq.max_freq))
+		if ((freq < cpufreq->min_freq) || (freq > cpufreq->max_freq))
 			freq_tbl[i].frequency = CPUFREQ_ENTRY_INVALID;
 		else
 			freq_tbl[i].frequency = freq;
-		dev_dbg(ls1x_cpufreq.dev,
+		dev_dbg(cpu_dev,
 			"cpufreq table: index %d: frequency %d\n", i,
 			freq_tbl[i].frequency);
 	}
 	freq_tbl[i].frequency = CPUFREQ_TABLE_END;
 
-	policy->clk = ls1x_cpufreq.clk;
+	policy->clk = cpufreq->clk;
 	ret = cpufreq_generic_init(policy, freq_tbl, 0);
 	if (ret)
 		kfree(freq_tbl);
-out:
+
 	return ret;
 }
 
@@ -138,85 +137,86 @@ static int ls1x_cpufreq_remove(struct platform_device *pdev)
 
 static int ls1x_cpufreq_probe(struct platform_device *pdev)
 {
-	struct plat_ls1x_cpufreq *pdata = pdev->dev.platform_data;
+	struct plat_ls1x_cpufreq *pdata = dev_get_platdata(&pdev->dev);
 	struct clk *clk;
 	int ret;
 
-	if (!pdata || !pdata->clk_name || !pdata->osc_clk_name)
+	if (!pdata || !pdata->clk_name || !pdata->osc_clk_name) {
+		dev_err(&pdev->dev, "platform data missing\n");
 		return -EINVAL;
+	}
 
-	ls1x_cpufreq.dev = &pdev->dev;
+	cpufreq =
+	    devm_kzalloc(&pdev->dev, sizeof(struct ls1x_cpufreq), GFP_KERNEL);
+	if (!cpufreq)
+		return -ENOMEM;
+
+	cpufreq->dev = &pdev->dev;
 
 	clk = devm_clk_get(&pdev->dev, pdata->clk_name);
 	if (IS_ERR(clk)) {
-		dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n",
+		dev_err(&pdev->dev, "unable to get %s clock\n",
 			pdata->clk_name);
-		ret = PTR_ERR(clk);
-		goto out;
+		return PTR_ERR(clk);
 	}
-	ls1x_cpufreq.clk = clk;
+	cpufreq->clk = clk;
 
 	clk = clk_get_parent(clk);
 	if (IS_ERR(clk)) {
-		dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n",
-			__clk_get_name(ls1x_cpufreq.clk));
-		ret = PTR_ERR(clk);
-		goto out;
+		dev_err(&pdev->dev, "unable to get parent of %s clock\n",
+			__clk_get_name(cpufreq->clk));
+		return PTR_ERR(clk);
 	}
-	ls1x_cpufreq.mux_clk = clk;
+	cpufreq->mux_clk = clk;
 
 	clk = clk_get_parent(clk);
 	if (IS_ERR(clk)) {
-		dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n",
-			__clk_get_name(ls1x_cpufreq.mux_clk));
-		ret = PTR_ERR(clk);
-		goto out;
+		dev_err(&pdev->dev, "unable to get parent of %s clock\n",
+			__clk_get_name(cpufreq->mux_clk));
+		return PTR_ERR(clk);
 	}
-	ls1x_cpufreq.pll_clk = clk;
+	cpufreq->pll_clk = clk;
 
 	clk = devm_clk_get(&pdev->dev, pdata->osc_clk_name);
 	if (IS_ERR(clk)) {
-		dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n",
+		dev_err(&pdev->dev, "unable to get %s clock\n",
 			pdata->osc_clk_name);
-		ret = PTR_ERR(clk);
-		goto out;
+		return PTR_ERR(clk);
 	}
-	ls1x_cpufreq.osc_clk = clk;
+	cpufreq->osc_clk = clk;
 
-	ls1x_cpufreq.max_freq = pdata->max_freq;
-	ls1x_cpufreq.min_freq = pdata->min_freq;
+	cpufreq->max_freq = pdata->max_freq;
+	cpufreq->min_freq = pdata->min_freq;
 
 	ret = cpufreq_register_driver(&ls1x_cpufreq_driver);
 	if (ret) {
-		dev_err(ls1x_cpufreq.dev,
-			"failed to register cpufreq driver: %d\n", ret);
-		goto out;
+		dev_err(&pdev->dev,
+			"failed to register CPUFreq driver: %d\n", ret);
+		return ret;
 	}
 
 	ret = cpufreq_register_notifier(&ls1x_cpufreq_notifier_block,
 					CPUFREQ_TRANSITION_NOTIFIER);
 
-	if (!ret)
-		goto out;
-
-	dev_err(ls1x_cpufreq.dev, "failed to register cpufreq notifier: %d\n",
-		ret);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to register CPUFreq notifier: %d\n",ret);
+		cpufreq_unregister_driver(&ls1x_cpufreq_driver);
+	}
 
-	cpufreq_unregister_driver(&ls1x_cpufreq_driver);
-out:
 	return ret;
 }
 
 static struct platform_driver ls1x_cpufreq_platdrv = {
-	.driver = {
+	.probe	= ls1x_cpufreq_probe,
+	.remove	= ls1x_cpufreq_remove,
+	.driver	= {
 		.name	= "ls1x-cpufreq",
 	},
-	.probe		= ls1x_cpufreq_probe,
-	.remove		= ls1x_cpufreq_remove,
 };
 
 module_platform_driver(ls1x_cpufreq_platdrv);
 
 MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>");
-MODULE_DESCRIPTION("Loongson 1 CPUFreq driver");
+MODULE_DESCRIPTION("Loongson1 CPUFreq driver");
 MODULE_LICENSE("GPL");