summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-11-03 09:59:39 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-11-03 09:59:39 -0700
commit70c9f18ca8f3652c7dcf715e9f0d41c399fe130d (patch)
tree5824f0937025688aab07582838d1a0aea5a24a3f /drivers/cpufreq
parenta0a4194c943bc64dd7b6e26cccb036cb26b81363 (diff)
parent6283e328fb8148a8a5753e95c04c16aaef2287c0 (diff)
downloadlinux-70c9f18ca8f3652c7dcf715e9f0d41c399fe130d.tar.bz2
Merge branch 'next' of git://github.com/kernelslacker/cpufreq
* 'next' of git://github.com/kernelslacker/cpufreq: [CPUFREQ] db8500: support all frequencies [CPUFREQ] db8500: remove unneeded for loop iteration over freq_table [CPUFREQ] ARM Exynos4210 PM/Suspend compatibility with different bootloaders [CPUFREQ] ARM: ux500: send cpufreq notification for all cpus [CPUFREQ] e_powersaver: Allow user to lower maximum voltage [CPUFREQ] e_powersaver: Check BIOS limit for CPU frequency [CPUFREQ] e_powersaver: Additional checks [CPUFREQ] exynos4210: Show list of available frequencies
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/db8500-cpufreq.c36
-rw-r--r--drivers/cpufreq/e_powersaver.c135
-rw-r--r--drivers/cpufreq/exynos4210-cpufreq.c129
3 files changed, 268 insertions, 32 deletions
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 8e89dcf9d94d..edaa987621ea 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -18,24 +18,29 @@
static struct cpufreq_frequency_table freq_table[] = {
[0] = {
.index = 0,
- .frequency = 300000,
+ .frequency = 200000,
},
[1] = {
.index = 1,
- .frequency = 600000,
+ .frequency = 300000,
},
[2] = {
- /* Used for MAX_OPP, if available */
.index = 2,
- .frequency = CPUFREQ_TABLE_END,
+ .frequency = 600000,
},
[3] = {
+ /* Used for MAX_OPP, if available */
.index = 3,
.frequency = CPUFREQ_TABLE_END,
},
+ [4] = {
+ .index = 4,
+ .frequency = CPUFREQ_TABLE_END,
+ },
};
static enum arm_opp idx2opp[] = {
+ ARM_EXTCLK,
ARM_50_OPP,
ARM_100_OPP,
ARM_MAX_OPP
@@ -72,13 +77,13 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy,
freqs.old = policy->cur;
freqs.new = freq_table[idx].frequency;
- freqs.cpu = policy->cpu;
if (freqs.old == freqs.new)
return 0;
/* pre-change notification */
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* request the PRCM unit for opp change */
if (prcmu_set_arm_opp(idx2opp[idx])) {
@@ -87,7 +92,8 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy,
}
/* post change notification */
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return 0;
}
@@ -104,16 +110,18 @@ static unsigned int db8500_cpufreq_getspeed(unsigned int cpu)
static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
{
int res;
- int i;
BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
- if (cpu_is_u8500v2() && !prcmu_is_u8400()) {
- freq_table[0].frequency = 400000;
- freq_table[1].frequency = 800000;
+ if (!prcmu_is_u8400()) {
+ freq_table[1].frequency = 400000;
+ freq_table[2].frequency = 800000;
if (prcmu_has_arm_maxopp())
- freq_table[2].frequency = 1000000;
+ freq_table[3].frequency = 1000000;
}
+ pr_info("db8500-cpufreq : Available frequencies:\n");
+ while (freq_table[i].frequency != CPUFREQ_TABLE_END)
+ pr_info(" %d Mhz\n", freq_table[i++].frequency/1000);
/* get policy fields based on the table */
res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
@@ -127,10 +135,6 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
policy->min = policy->cpuinfo.min_freq;
policy->max = policy->cpuinfo.max_freq;
policy->cur = db8500_cpufreq_getspeed(policy->cpu);
-
- for (i = 0; freq_table[i].frequency != policy->cur; i++)
- ;
-
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
/*
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 35a257dd4bb7..4bd6815d317b 100644
--- a/drivers/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
@@ -19,6 +19,11 @@
#include <asm/msr.h>
#include <asm/tsc.h>
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
#define EPS_BRAND_C7M 0
#define EPS_BRAND_C7 1
#define EPS_BRAND_EDEN 2
@@ -27,11 +32,59 @@
struct eps_cpu_data {
u32 fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+ u32 bios_limit;
+#endif
struct cpufreq_frequency_table freq_table[];
};
static struct eps_cpu_data *eps_cpu[NR_CPUS];
+/* Module parameters */
+static int freq_failsafe_off;
+static int voltage_failsafe_off;
+static int set_max_voltage;
+
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+static int ignore_acpi_limit;
+
+static struct acpi_processor_performance *eps_acpi_cpu_perf;
+
+/* Minimum necessary to get acpi_processor_get_bios_limit() working */
+static int eps_acpi_init(void)
+{
+ eps_acpi_cpu_perf = kzalloc(sizeof(struct acpi_processor_performance),
+ GFP_KERNEL);
+ if (!eps_acpi_cpu_perf)
+ return -ENOMEM;
+
+ if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map,
+ GFP_KERNEL)) {
+ kfree(eps_acpi_cpu_perf);
+ eps_acpi_cpu_perf = NULL;
+ return -ENOMEM;
+ }
+
+ if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) {
+ free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+ kfree(eps_acpi_cpu_perf);
+ eps_acpi_cpu_perf = NULL;
+ return -EIO;
+ }
+ return 0;
+}
+
+static int eps_acpi_exit(struct cpufreq_policy *policy)
+{
+ if (eps_acpi_cpu_perf) {
+ acpi_processor_unregister_performance(eps_acpi_cpu_perf, 0);
+ free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+ kfree(eps_acpi_cpu_perf);
+ eps_acpi_cpu_perf = NULL;
+ }
+ return 0;
+}
+#endif
static unsigned int eps_get(unsigned int cpu)
{
@@ -164,6 +217,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
int k, step, voltage;
int ret;
int states;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+ unsigned int limit;
+#endif
if (policy->cpu != 0)
return -ENODEV;
@@ -244,11 +300,62 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
return -EINVAL;
if (current_voltage > 0x1f || max_voltage > 0x1f)
return -EINVAL;
- if (max_voltage < min_voltage)
+ if (max_voltage < min_voltage
+ || current_voltage < min_voltage
+ || current_voltage > max_voltage)
return -EINVAL;
+ /* Check for systems using underclocked CPU */
+ if (!freq_failsafe_off && max_multiplier != current_multiplier) {
+ printk(KERN_INFO "eps: Your processor is running at different "
+ "frequency then its maximum. Aborting.\n");
+ printk(KERN_INFO "eps: You can use freq_failsafe_off option "
+ "to disable this check.\n");
+ return -EINVAL;
+ }
+ if (!voltage_failsafe_off && max_voltage != current_voltage) {
+ printk(KERN_INFO "eps: Your processor is running at different "
+ "voltage then its maximum. Aborting.\n");
+ printk(KERN_INFO "eps: You can use voltage_failsafe_off "
+ "option to disable this check.\n");
+ return -EINVAL;
+ }
+
/* Calc FSB speed */
fsb = cpu_khz / current_multiplier;
+
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+ /* Check for ACPI processor speed limit */
+ if (!ignore_acpi_limit && !eps_acpi_init()) {
+ if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
+ printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n",
+ limit/1000000,
+ (limit%1000000)/10000);
+ eps_acpi_exit(policy);
+ /* Check if max_multiplier is in BIOS limits */
+ if (limit && max_multiplier * fsb > limit) {
+ printk(KERN_INFO "eps: Aborting.\n");
+ return -EINVAL;
+ }
+ }
+ }
+#endif
+
+ /* Allow user to set lower maximum voltage then that reported
+ * by processor */
+ if (brand == EPS_BRAND_C7M && set_max_voltage) {
+ u32 v;
+
+ /* Change mV to something hardware can use */
+ v = (set_max_voltage - 700) / 16;
+ /* Check if voltage is within limits */
+ if (v >= min_voltage && v <= max_voltage) {
+ printk(KERN_INFO "eps: Setting %dmV as maximum.\n",
+ v * 16 + 700);
+ max_voltage = v;
+ }
+ }
+
/* Calc number of p-states supported */
if (brand == EPS_BRAND_C7M)
states = max_multiplier - min_multiplier + 1;
@@ -265,6 +372,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
/* Copy basic values */
centaur->fsb = fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+ centaur->bios_limit = limit;
+#endif
/* Fill frequency and MSR value table */
f_table = &centaur->freq_table[0];
@@ -303,17 +413,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
static int eps_cpu_exit(struct cpufreq_policy *policy)
{
unsigned int cpu = policy->cpu;
- struct eps_cpu_data *centaur;
- u32 lo, hi;
- if (eps_cpu[cpu] == NULL)
- return -ENODEV;
- centaur = eps_cpu[cpu];
-
- /* Get max frequency */
- rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
- /* Set max frequency */
- eps_set_state(centaur, cpu, hi & 0xffff);
/* Bye */
cpufreq_frequency_table_put_attr(policy->cpu);
kfree(eps_cpu[cpu]);
@@ -359,6 +459,19 @@ static void __exit eps_exit(void)
cpufreq_unregister_driver(&eps_driver);
}
+/* Allow user to overclock his machine or to change frequency to higher after
+ * unloading module */
+module_param(freq_failsafe_off, int, 0644);
+MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
+module_param(voltage_failsafe_off, int, 0644);
+MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+module_param(ignore_acpi_limit, int, 0644);
+MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
+#endif
+module_param(set_max_voltage, int, 0644);
+MODULE_PARM_DESC(set_max_voltage, "Set maximum CPU voltage (mV) C7-M only");
+
MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index b7c3a84c4cfa..ab9741fab92e 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -17,6 +17,8 @@
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
+#include <linux/notifier.h>
+#include <linux/suspend.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
@@ -36,6 +38,10 @@ static struct regulator *int_regulator;
static struct cpufreq_freqs freqs;
static unsigned int memtype;
+static unsigned int locking_frequency;
+static bool frequency_locked;
+static DEFINE_MUTEX(cpufreq_lock);
+
enum exynos4_memory_type {
DDR2 = 4,
LPDDR2,
@@ -405,22 +411,32 @@ static int exynos4_target(struct cpufreq_policy *policy,
{
unsigned int index, old_index;
unsigned int arm_volt, int_volt;
+ int err = -EINVAL;
freqs.old = exynos4_getspeed(policy->cpu);
+ mutex_lock(&cpufreq_lock);
+
+ if (frequency_locked && target_freq != locking_frequency) {
+ err = -EAGAIN;
+ goto out;
+ }
+
if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
freqs.old, relation, &old_index))
- return -EINVAL;
+ goto out;
if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
target_freq, relation, &index))
- return -EINVAL;
+ goto out;
+
+ err = 0;
freqs.new = exynos4_freq_table[index].frequency;
freqs.cpu = policy->cpu;
if (freqs.new == freqs.old)
- return 0;
+ goto out;
/* get the voltage value */
arm_volt = exynos4_volt_table[index].arm_volt;
@@ -447,10 +463,16 @@ static int exynos4_target(struct cpufreq_policy *policy,
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- return 0;
+out:
+ mutex_unlock(&cpufreq_lock);
+ return err;
}
#ifdef CONFIG_PM
+/*
+ * These suspend/resume are used as syscore_ops, it is already too
+ * late to set regulator voltages at this stage.
+ */
static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy)
{
return 0;
@@ -462,8 +484,82 @@ static int exynos4_cpufreq_resume(struct cpufreq_policy *policy)
}
#endif
+/**
+ * exynos4_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
+ * context
+ * @notifier
+ * @pm_event
+ * @v
+ *
+ * While frequency_locked == true, target() ignores every frequency but
+ * locking_frequency. The locking_frequency value is the initial frequency,
+ * which is set by the bootloader. In order to eliminate possible
+ * inconsistency in clock values, we save and restore frequencies during
+ * suspend and resume and block CPUFREQ activities. Note that the standard
+ * suspend/resume cannot be used as they are too deep (syscore_ops) for
+ * regulator actions.
+ */
+static int exynos4_cpufreq_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event, void *v)
+{
+ struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
+ static unsigned int saved_frequency;
+ unsigned int temp;
+
+ mutex_lock(&cpufreq_lock);
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ if (frequency_locked)
+ goto out;
+ frequency_locked = true;
+
+ if (locking_frequency) {
+ saved_frequency = exynos4_getspeed(0);
+
+ mutex_unlock(&cpufreq_lock);
+ exynos4_target(policy, locking_frequency,
+ CPUFREQ_RELATION_H);
+ mutex_lock(&cpufreq_lock);
+ }
+
+ break;
+ case PM_POST_SUSPEND:
+
+ if (saved_frequency) {
+ /*
+ * While frequency_locked, only locking_frequency
+ * is valid for target(). In order to use
+ * saved_frequency while keeping frequency_locked,
+ * we temporarly overwrite locking_frequency.
+ */
+ temp = locking_frequency;
+ locking_frequency = saved_frequency;
+
+ mutex_unlock(&cpufreq_lock);
+ exynos4_target(policy, locking_frequency,
+ CPUFREQ_RELATION_H);
+ mutex_lock(&cpufreq_lock);
+
+ locking_frequency = temp;
+ }
+
+ frequency_locked = false;
+ break;
+ }
+out:
+ mutex_unlock(&cpufreq_lock);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block exynos4_cpufreq_nb = {
+ .notifier_call = exynos4_cpufreq_pm_notifier,
+};
+
static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
+ int ret;
+
policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu);
cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
@@ -479,16 +575,35 @@ static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
*/
cpumask_setall(policy->cpus);
- return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
+ ret = cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
+ if (ret)
+ return ret;
+
+ cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
+
+ return 0;
+}
+
+static int exynos4_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
}
+static struct freq_attr *exynos4_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
static struct cpufreq_driver exynos4_driver = {
.flags = CPUFREQ_STICKY,
.verify = exynos4_verify_speed,
.target = exynos4_target,
.get = exynos4_getspeed,
.init = exynos4_cpufreq_cpu_init,
+ .exit = exynos4_cpufreq_cpu_exit,
.name = "exynos4_cpufreq",
+ .attr = exynos4_cpufreq_attr,
#ifdef CONFIG_PM
.suspend = exynos4_cpufreq_suspend,
.resume = exynos4_cpufreq_resume,
@@ -501,6 +616,8 @@ static int __init exynos4_cpufreq_init(void)
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
+ locking_frequency = exynos4_getspeed(0);
+
moutcore = clk_get(NULL, "moutcore");
if (IS_ERR(moutcore))
goto out;
@@ -540,6 +657,8 @@ static int __init exynos4_cpufreq_init(void)
printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype);
}
+ register_pm_notifier(&exynos4_cpufreq_nb);
+
return cpufreq_register_driver(&exynos4_driver);
out: