diff options
author | Viresh Kumar <viresh.kumar@linaro.org> | 2013-08-14 19:38:24 +0530 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2013-10-31 00:11:08 +0100 |
commit | d4019f0a92ab802f385cc9c8ad3ab7b5449712cb (patch) | |
tree | ebd06695585e457ae1bf219653452b111e7508db /drivers/cpufreq/kirkwood-cpufreq.c | |
parent | 7dbf694db6ac7c759599316d50d7050efcbd512a (diff) | |
download | linux-d4019f0a92ab802f385cc9c8ad3ab7b5449712cb.tar.bz2 |
cpufreq: move freq change notifications to cpufreq core
Most of the drivers do following in their ->target_index() routines:
struct cpufreq_freqs freqs;
freqs.old = old freq...
freqs.new = new freq...
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
/* Change rate here */
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
This is replicated over all cpufreq drivers today and there doesn't exists a
good enough reason why this shouldn't be moved to cpufreq core instead.
There are few special cases though, like exynos5440, which doesn't do everything
on the call to ->target_index() routine and call some kind of bottom halves for
doing this work, work/tasklet/etc..
They may continue doing notification from their own code as flag:
CPUFREQ_ASYNC_NOTIFICATION is already set for them.
All drivers are also modified in this patch to avoid breaking 'git bisect', as
double notification would happen otherwise.
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/cpufreq/kirkwood-cpufreq.c')
-rw-r--r-- | drivers/cpufreq/kirkwood-cpufreq.c | 54 |
1 files changed, 20 insertions, 34 deletions
diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index 0ae4dd7e1f2d..0767a4e29dfe 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -58,48 +58,34 @@ static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu) static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, unsigned int index) { - struct cpufreq_freqs freqs; unsigned int state = kirkwood_freq_table[index].driver_data; unsigned long reg; - freqs.old = kirkwood_cpufreq_get_cpu_frequency(0); - freqs.new = kirkwood_freq_table[index].frequency; + local_irq_disable(); - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); + /* Disable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg |= CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); - dev_dbg(priv.dev, "Attempting to set frequency to %i KHz\n", - kirkwood_freq_table[index].frequency); - dev_dbg(priv.dev, "old frequency was %i KHz\n", - kirkwood_cpufreq_get_cpu_frequency(0)); - - if (freqs.old != freqs.new) { - local_irq_disable(); - - /* Disable interrupts to the CPU */ - reg = readl_relaxed(priv.base); - reg |= CPU_SW_INT_BLK; - writel_relaxed(reg, priv.base); - - switch (state) { - case STATE_CPU_FREQ: - clk_disable(priv.powersave_clk); - break; - case STATE_DDR_FREQ: - clk_enable(priv.powersave_clk); - break; - } + switch (state) { + case STATE_CPU_FREQ: + clk_disable(priv.powersave_clk); + break; + case STATE_DDR_FREQ: + clk_enable(priv.powersave_clk); + break; + } - /* Wait-for-Interrupt, while the hardware changes frequency */ - cpu_do_idle(); + /* Wait-for-Interrupt, while the hardware changes frequency */ + cpu_do_idle(); - /* Enable interrupts to the CPU */ - reg = readl_relaxed(priv.base); - reg &= ~CPU_SW_INT_BLK; - writel_relaxed(reg, priv.base); + /* Enable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg &= ~CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); - local_irq_enable(); - } - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + local_irq_enable(); return 0; } |