diff options
author | Viresh Kumar <viresh.kumar@linaro.org> | 2014-09-09 19:58:03 +0530 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2014-10-03 15:37:54 +0200 |
commit | bbcf071969b20f356877c8067986be0a2dcaa2aa (patch) | |
tree | 56c887ddf156924bcf86716690f51080ebdbfc21 /drivers/cpufreq/cpufreq-dt.c | |
parent | 0bf18f19be4d26545d7aa3114091cffe556572be (diff) | |
download | linux-bbcf071969b20f356877c8067986be0a2dcaa2aa.tar.bz2 |
cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
The naming convention of this driver was always under the scanner, people
complained that it should have a more generic name than cpu0, as it manages all
CPUs that are sharing clock lines.
Also, in future it will be modified to support any number of clusters with
separate clock/voltage lines.
Lets rename it to 'cpufreq_dt' from 'cpufreq_cpu0'.
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/cpufreq/cpufreq-dt.c')
-rw-r--r-- | drivers/cpufreq/cpufreq-dt.c | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c new file mode 100644 index 000000000000..e00265066a75 --- /dev/null +++ b/drivers/cpufreq/cpufreq-dt.c @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * Copyright (C) 2014 Linaro. + * Viresh Kumar <viresh.kumar@linaro.org> + * + * The OPP code in function set_target() is reused from + * drivers/cpufreq/omap-cpufreq.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/cpu.h> +#include <linux/cpu_cooling.h> +#include <linux/cpufreq.h> +#include <linux/cpumask.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm_opp.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/thermal.h> + +struct private_data { + struct device *cpu_dev; + struct regulator *cpu_reg; + struct thermal_cooling_device *cdev; + unsigned int voltage_tolerance; /* in percentage */ +}; + +static int set_target(struct cpufreq_policy *policy, unsigned int index) +{ + struct dev_pm_opp *opp; + struct cpufreq_frequency_table *freq_table = policy->freq_table; + struct clk *cpu_clk = policy->clk; + struct private_data *priv = policy->driver_data; + struct device *cpu_dev = priv->cpu_dev; + struct regulator *cpu_reg = priv->cpu_reg; + unsigned long volt = 0, volt_old = 0, tol = 0; + unsigned int old_freq, new_freq; + long freq_Hz, freq_exact; + int ret; + + freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000); + if (freq_Hz <= 0) + freq_Hz = freq_table[index].frequency * 1000; + + freq_exact = freq_Hz; + new_freq = freq_Hz / 1000; + old_freq = clk_get_rate(cpu_clk) / 1000; + + if (!IS_ERR(cpu_reg)) { + rcu_read_lock(); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz); + if (IS_ERR(opp)) { + rcu_read_unlock(); + dev_err(cpu_dev, "failed to find OPP for %ld\n", + freq_Hz); + return PTR_ERR(opp); + } + volt = dev_pm_opp_get_voltage(opp); + rcu_read_unlock(); + tol = volt * priv->voltage_tolerance / 100; + volt_old = regulator_get_voltage(cpu_reg); + } + + dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n", + old_freq / 1000, volt_old ? volt_old / 1000 : -1, + new_freq / 1000, volt ? volt / 1000 : -1); + + /* scaling up? scale voltage before frequency */ + if (!IS_ERR(cpu_reg) && new_freq > old_freq) { + ret = regulator_set_voltage_tol(cpu_reg, volt, tol); + if (ret) { + dev_err(cpu_dev, "failed to scale voltage up: %d\n", + ret); + return ret; + } + } + + ret = clk_set_rate(cpu_clk, freq_exact); + if (ret) { + dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); + if (!IS_ERR(cpu_reg)) + regulator_set_voltage_tol(cpu_reg, volt_old, tol); + return ret; + } + + /* scaling down? scale voltage after frequency */ + if (!IS_ERR(cpu_reg) && new_freq < old_freq) { + ret = regulator_set_voltage_tol(cpu_reg, volt, tol); + if (ret) { + dev_err(cpu_dev, "failed to scale voltage down: %d\n", + ret); + clk_set_rate(cpu_clk, old_freq * 1000); + } + } + + return ret; +} + +static int allocate_resources(int cpu, struct device **cdev, + struct regulator **creg, struct clk **cclk) +{ + struct device *cpu_dev; + struct regulator *cpu_reg; + struct clk *cpu_clk; + int ret = 0; + char *reg_cpu0 = "cpu0", *reg_cpu = "cpu", *reg; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("failed to get cpu%d device\n", cpu); + return -ENODEV; + } + + /* Try "cpu0" for older DTs */ + if (!cpu) + reg = reg_cpu0; + else + reg = reg_cpu; + +try_again: + cpu_reg = regulator_get_optional(cpu_dev, reg); + if (IS_ERR(cpu_reg)) { + /* + * If cpu's regulator supply node is present, but regulator is + * not yet registered, we should try defering probe. + */ + if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) { + dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n", + cpu); + return -EPROBE_DEFER; + } + + /* Try with "cpu-supply" */ + if (reg == reg_cpu0) { + reg = reg_cpu; + goto try_again; + } + + dev_warn(cpu_dev, "failed to get cpu%d regulator: %ld\n", + cpu, PTR_ERR(cpu_reg)); + } + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + /* put regulator */ + if (!IS_ERR(cpu_reg)) + regulator_put(cpu_reg); + + ret = PTR_ERR(cpu_clk); + + /* + * If cpu's clk node is present, but clock is not yet + * registered, we should try defering probe. + */ + if (ret == -EPROBE_DEFER) + dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu); + else + dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", ret, + cpu); + } else { + *cdev = cpu_dev; + *creg = cpu_reg; + *cclk = cpu_clk; + } + + return ret; +} + +static int cpufreq_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq_table; + struct thermal_cooling_device *cdev; + struct device_node *np; + struct private_data *priv; + struct device *cpu_dev; + struct regulator *cpu_reg; + struct clk *cpu_clk; + unsigned int transition_latency; + int ret; + + ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk); + if (ret) { + pr_err("%s: Failed to allocate resources\n: %d", __func__, ret); + return ret; + } + + np = of_node_get(cpu_dev->of_node); + if (!np) { + dev_err(cpu_dev, "failed to find cpu%d node\n", policy->cpu); + ret = -ENOENT; + goto out_put_reg_clk; + } + + /* OPPs might be populated at runtime, don't check for error here */ + of_init_opp_table(cpu_dev); + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto out_put_node; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto out_free_table; + } + + of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance); + + if (of_property_read_u32(np, "clock-latency", &transition_latency)) + transition_latency = CPUFREQ_ETERNAL; + + if (!IS_ERR(cpu_reg)) { + struct dev_pm_opp *opp; + unsigned long min_uV, max_uV; + int i; + + /* + * OPP is maintained in order of increasing frequency, and + * freq_table initialised from OPP is therefore sorted in the + * same order. + */ + for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) + ; + rcu_read_lock(); + opp = dev_pm_opp_find_freq_exact(cpu_dev, + freq_table[0].frequency * 1000, true); + min_uV = dev_pm_opp_get_voltage(opp); + opp = dev_pm_opp_find_freq_exact(cpu_dev, + freq_table[i-1].frequency * 1000, true); + max_uV = dev_pm_opp_get_voltage(opp); + rcu_read_unlock(); + ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); + if (ret > 0) + transition_latency += ret * 1000; + } + + /* + * For now, just loading the cooling device; + * thermal DT code takes care of matching them. + */ + if (of_find_property(np, "#cooling-cells", NULL)) { + cdev = of_cpufreq_cooling_register(np, cpu_present_mask); + if (IS_ERR(cdev)) + dev_err(cpu_dev, + "running cpufreq without cooling device: %ld\n", + PTR_ERR(cdev)); + else + priv->cdev = cdev; + } + of_node_put(np); + + priv->cpu_dev = cpu_dev; + priv->cpu_reg = cpu_reg; + policy->driver_data = priv; + + policy->clk = cpu_clk; + ret = cpufreq_generic_init(policy, freq_table, transition_latency); + if (ret) + goto out_cooling_unregister; + + return 0; + +out_cooling_unregister: + cpufreq_cooling_unregister(priv->cdev); + kfree(priv); +out_free_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); +out_put_node: + of_node_put(np); +out_put_reg_clk: + clk_put(cpu_clk); + if (!IS_ERR(cpu_reg)) + regulator_put(cpu_reg); + + return ret; +} + +static int cpufreq_exit(struct cpufreq_policy *policy) +{ + struct private_data *priv = policy->driver_data; + + cpufreq_cooling_unregister(priv->cdev); + dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); + clk_put(policy->clk); + if (!IS_ERR(priv->cpu_reg)) + regulator_put(priv->cpu_reg); + kfree(priv); + + return 0; +} + +static struct cpufreq_driver dt_cpufreq_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = set_target, + .get = cpufreq_generic_get, + .init = cpufreq_init, + .exit = cpufreq_exit, + .name = "cpufreq-dt", + .attr = cpufreq_generic_attr, +}; + +static int dt_cpufreq_probe(struct platform_device *pdev) +{ + struct device *cpu_dev; + struct regulator *cpu_reg; + struct clk *cpu_clk; + int ret; + + /* + * All per-cluster (CPUs sharing clock/voltages) initialization is done + * from ->init(). In probe(), we just need to make sure that clk and + * regulators are available. Else defer probe and retry. + * + * FIXME: Is checking this only for CPU0 sufficient ? + */ + ret = allocate_resources(0, &cpu_dev, &cpu_reg, &cpu_clk); + if (ret) + return ret; + + clk_put(cpu_clk); + if (!IS_ERR(cpu_reg)) + regulator_put(cpu_reg); + + ret = cpufreq_register_driver(&dt_cpufreq_driver); + if (ret) + dev_err(cpu_dev, "failed register driver: %d\n", ret); + + return ret; +} + +static int dt_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&dt_cpufreq_driver); + return 0; +} + +static struct platform_driver dt_cpufreq_platdrv = { + .driver = { + .name = "cpufreq-dt", + .owner = THIS_MODULE, + }, + .probe = dt_cpufreq_probe, + .remove = dt_cpufreq_remove, +}; +module_platform_driver(dt_cpufreq_platdrv); + +MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); +MODULE_DESCRIPTION("Generic cpufreq driver"); +MODULE_LICENSE("GPL"); |