Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

1 files changed, 48 insertions, 12 deletions

diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index e405531e1cc5..b9415b622f55 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -13,6 +13,9 @@
 #include <linux/io.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/delay.h>
@@ -188,22 +191,15 @@ static struct irqaction nmdk_timer_irq = {
 	.dev_id		= &nmdk_clkevt,
 };
 
-void __init nmdk_timer_init(void __iomem *base, int irq)
+static void __init __nmdk_timer_init(void __iomem *base, int irq,
+				     struct clk *pclk, struct clk *clk)
 {
 	unsigned long rate;
-	struct clk *clk0, *pclk0;
 
 	mtu_base = base;
 
-	pclk0 = clk_get_sys("mtu0", "apb_pclk");
-	BUG_ON(IS_ERR(pclk0));
-	BUG_ON(clk_prepare(pclk0) < 0);
-	BUG_ON(clk_enable(pclk0) < 0);
-
-	clk0 = clk_get_sys("mtu0", NULL);
-	BUG_ON(IS_ERR(clk0));
-	BUG_ON(clk_prepare(clk0) < 0);
-	BUG_ON(clk_enable(clk0) < 0);
+	BUG_ON(clk_prepare_enable(pclk));
+	BUG_ON(clk_prepare_enable(clk));
 
 	/*
 	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
@@ -213,7 +209,7 @@ void __init nmdk_timer_init(void __iomem *base, int irq)
 	 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
 	 * with 16 gives too low timer resolution.
 	 */
-	rate = clk_get_rate(clk0);
+	rate = clk_get_rate(clk);
 	if (rate > 32000000) {
 		rate /= 16;
 		clk_prescale = MTU_CRn_PRESCALE_16;
@@ -247,3 +243,43 @@ void __init nmdk_timer_init(void __iomem *base, int irq)
 	mtu_delay_timer.freq = rate;
 	register_current_timer_delay(&mtu_delay_timer);
 }
+
+void __init nmdk_timer_init(void __iomem *base, int irq)
+{
+	struct clk *clk0, *pclk0;
+
+	pclk0 = clk_get_sys("mtu0", "apb_pclk");
+	BUG_ON(IS_ERR(pclk0));
+	clk0 = clk_get_sys("mtu0", NULL);
+	BUG_ON(IS_ERR(clk0));
+
+	__nmdk_timer_init(base, irq, pclk0, clk0);
+}
+
+static void __init nmdk_timer_of_init(struct device_node *node)
+{
+	struct clk *pclk;
+	struct clk *clk;
+	void __iomem *base;
+	int irq;
+
+	base = of_iomap(node, 0);
+	if (!base)
+		panic("Can't remap registers");
+
+	pclk = of_clk_get_by_name(node, "apb_pclk");
+	if (IS_ERR(pclk))
+		panic("could not get apb_pclk");
+
+	clk = of_clk_get_by_name(node, "timclk");
+	if (IS_ERR(clk))
+		panic("could not get timclk");
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq <= 0)
+		panic("Can't parse IRQ");
+
+	__nmdk_timer_init(base, irq, pclk, clk);
+}
+CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
+		       nmdk_timer_of_init);