diff options
author | Vineet Gupta <Vineet.Gupta1@synopsys.com> | 2020-11-05 13:22:08 -0800 |
---|---|---|
committer | Daniel Lezcano <daniel.lezcano@linaro.org> | 2020-12-03 19:16:18 +0100 |
commit | b6ea209ef124dad4045772a759e2aecd191534c0 (patch) | |
tree | a747702444a40553edfe59d274338107c4f9ff7d /drivers/clocksource | |
parent | 0fce2e02a29ca5420472f03d3f2858eedded3fe7 (diff) | |
download | linux-b6ea209ef124dad4045772a759e2aecd191534c0.tar.bz2 |
clocksource/drivers/nps: Remove EZChip NPS clocksource driver
NPS platform has been removed from ARC port and there are no in-tree
users of it now. So RIP !
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201105212210.1891598-2-vgupta@synopsys.com
Diffstat (limited to 'drivers/clocksource')
-rw-r--r-- | drivers/clocksource/Kconfig | 10 | ||||
-rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
-rw-r--r-- | drivers/clocksource/timer-nps.c | 284 |
3 files changed, 0 insertions, 295 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 68b087bff59c..390c27cd926d 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -275,16 +275,6 @@ config CLKSRC_TI_32K This option enables support for Texas Instruments 32.768 Hz clocksource available on many OMAP-like platforms. -config CLKSRC_NPS - bool "NPS400 clocksource driver" if COMPILE_TEST - depends on !PHYS_ADDR_T_64BIT - select CLKSRC_MMIO - select TIMER_OF if OF - help - NPS400 clocksource support. - It has a 64-bit counter with update rate up to 1000MHz. - This counter is accessed via couple of 32-bit memory-mapped registers. - config CLKSRC_STM32 bool "Clocksource for STM32 SoCs" if !ARCH_STM32 depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST) diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 1c444cc3bb44..3c75cbbf8533 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -56,7 +56,6 @@ obj-$(CONFIG_CLKSRC_QCOM) += timer-qcom.o obj-$(CONFIG_MTK_TIMER) += timer-mediatek.o obj-$(CONFIG_CLKSRC_PISTACHIO) += timer-pistachio.o obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o -obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o obj-$(CONFIG_OWL_TIMER) += timer-owl.o obj-$(CONFIG_MILBEAUT_TIMER) += timer-milbeaut.o diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c deleted file mode 100644 index 7b6bb0df96ae..000000000000 --- a/drivers/clocksource/timer-nps.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Copyright (c) 2016, Mellanox Technologies. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#include <linux/interrupt.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/of.h> -#include <linux/of_irq.h> -#include <linux/cpu.h> -#include <soc/nps/common.h> - -#define NPS_MSU_TICK_LOW 0xC8 -#define NPS_CLUSTER_OFFSET 8 -#define NPS_CLUSTER_NUM 16 - -/* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */ -static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly; - -static int __init nps_get_timer_clk(struct device_node *node, - unsigned long *timer_freq, - struct clk **clk) -{ - int ret; - - *clk = of_clk_get(node, 0); - ret = PTR_ERR_OR_ZERO(*clk); - if (ret) { - pr_err("timer missing clk\n"); - return ret; - } - - ret = clk_prepare_enable(*clk); - if (ret) { - pr_err("Couldn't enable parent clk\n"); - clk_put(*clk); - return ret; - } - - *timer_freq = clk_get_rate(*clk); - if (!(*timer_freq)) { - pr_err("Couldn't get clk rate\n"); - clk_disable_unprepare(*clk); - clk_put(*clk); - return -EINVAL; - } - - return 0; -} - -static u64 nps_clksrc_read(struct clocksource *clksrc) -{ - int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET; - - return (u64)ioread32be(nps_msu_reg_low_addr[cluster]); -} - -static int __init nps_setup_clocksource(struct device_node *node) -{ - int ret, cluster; - struct clk *clk; - unsigned long nps_timer1_freq; - - - for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++) - nps_msu_reg_low_addr[cluster] = - nps_host_reg((cluster << NPS_CLUSTER_OFFSET), - NPS_MSU_BLKID, NPS_MSU_TICK_LOW); - - ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk); - if (ret) - return ret; - - ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick", - nps_timer1_freq, 300, 32, nps_clksrc_read); - if (ret) { - pr_err("Couldn't register clock source.\n"); - clk_disable_unprepare(clk); - } - - return ret; -} - -TIMER_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer", - nps_setup_clocksource); -TIMER_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1", - nps_setup_clocksource); - -#ifdef CONFIG_EZNPS_MTM_EXT -#include <soc/nps/mtm.h> - -/* Timer related Aux registers */ -#define NPS_REG_TIMER0_TSI 0xFFFFF850 -#define NPS_REG_TIMER0_LIMIT 0x23 -#define NPS_REG_TIMER0_CTRL 0x22 -#define NPS_REG_TIMER0_CNT 0x21 - -/* - * Interrupt Enabled (IE) - re-arm the timer - * Not Halted (NH) - is cleared when working with JTAG (for debug) - */ -#define TIMER0_CTRL_IE BIT(0) -#define TIMER0_CTRL_NH BIT(1) - -static unsigned long nps_timer0_freq; -static unsigned long nps_timer0_irq; - -static void nps_clkevent_rm_thread(void) -{ - int thread; - unsigned int cflags, enabled_threads; - - hw_schd_save(&cflags); - - enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI); - - /* remove thread from TSI1 */ - thread = read_aux_reg(CTOP_AUX_THREAD_ID); - enabled_threads &= ~(1 << thread); - write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads); - - /* Acknowledge and if needed re-arm the timer */ - if (!enabled_threads) - write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH); - else - write_aux_reg(NPS_REG_TIMER0_CTRL, - TIMER0_CTRL_IE | TIMER0_CTRL_NH); - - hw_schd_restore(cflags); -} - -static void nps_clkevent_add_thread(unsigned long delta) -{ - int thread; - unsigned int cflags, enabled_threads; - - hw_schd_save(&cflags); - - /* add thread to TSI1 */ - thread = read_aux_reg(CTOP_AUX_THREAD_ID); - enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI); - enabled_threads |= (1 << thread); - write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads); - - /* set next timer event */ - write_aux_reg(NPS_REG_TIMER0_LIMIT, delta); - write_aux_reg(NPS_REG_TIMER0_CNT, 0); - write_aux_reg(NPS_REG_TIMER0_CTRL, - TIMER0_CTRL_IE | TIMER0_CTRL_NH); - - hw_schd_restore(cflags); -} - -/* - * Whenever anyone tries to change modes, we just mask interrupts - * and wait for the next event to get set. - */ -static int nps_clkevent_set_state(struct clock_event_device *dev) -{ - nps_clkevent_rm_thread(); - disable_percpu_irq(nps_timer0_irq); - - return 0; -} - -static int nps_clkevent_set_next_event(unsigned long delta, - struct clock_event_device *dev) -{ - nps_clkevent_add_thread(delta); - enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE); - - return 0; -} - -static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = { - .name = "NPS Timer0", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 300, - .set_next_event = nps_clkevent_set_next_event, - .set_state_oneshot = nps_clkevent_set_state, - .set_state_oneshot_stopped = nps_clkevent_set_state, - .set_state_shutdown = nps_clkevent_set_state, - .tick_resume = nps_clkevent_set_state, -}; - -static irqreturn_t timer_irq_handler(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - nps_clkevent_rm_thread(); - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static int nps_timer_starting_cpu(unsigned int cpu) -{ - struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device); - - evt->cpumask = cpumask_of(smp_processor_id()); - - clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX); - enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE); - - return 0; -} - -static int nps_timer_dying_cpu(unsigned int cpu) -{ - disable_percpu_irq(nps_timer0_irq); - return 0; -} - -static int __init nps_setup_clockevent(struct device_node *node) -{ - struct clk *clk; - int ret; - - nps_timer0_irq = irq_of_parse_and_map(node, 0); - if (nps_timer0_irq <= 0) { - pr_err("clockevent: missing irq\n"); - return -EINVAL; - } - - ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk); - if (ret) - return ret; - - /* Needs apriori irq_set_percpu_devid() done in intc map function */ - ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler, - "Timer0 (per-cpu-tick)", - &nps_clockevent_device); - if (ret) { - pr_err("Couldn't request irq\n"); - clk_disable_unprepare(clk); - return ret; - } - - ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING, - "clockevents/nps:starting", - nps_timer_starting_cpu, - nps_timer_dying_cpu); - if (ret) { - pr_err("Failed to setup hotplug state\n"); - clk_disable_unprepare(clk); - free_percpu_irq(nps_timer0_irq, &nps_clockevent_device); - return ret; - } - - return 0; -} - -TIMER_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0", - nps_setup_clockevent); -#endif /* CONFIG_EZNPS_MTM_EXT */ |