arm64: Generic timers support

This patch adds support for the ARM generic timers with A64 instructions
for accessing the timer registers. It uses the physical counter as the
clock source and the virtual counter as sched_clock.

The timer frequency can be specified via DT or read from the CNTFRQ_EL0
register. The physical counter is also accessible from user space
allowing fast gettimeofday() implementation.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 238 insertions, 0 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index d53cd0afc200..6a78073c3808 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -35,3 +35,8 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
 	default y
 	help
 	  Use the always on PRCMU Timer as sched_clock
+
+config CLKSRC_ARM_GENERIC
+	def_bool y if ARM64
+	help
+	  This option enables support for the ARM generic timer.
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index b65d0c56ab35..65919901a301 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
+obj-$(CONFIG_CLKSRC_ARM_GENERIC)	+= arm_generic.o
diff --git a/drivers/clocksource/arm_generic.c b/drivers/clocksource/arm_generic.c
new file mode 100644
index 000000000000..c4d9f9566c64
--- /dev/null
+++ b/drivers/clocksource/arm_generic.c
@@ -0,0 +1,232 @@
+/*
+ * Generic timers support
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+#include <clocksource/arm_generic.h>
+
+#include <asm/arm_generic.h>
+
+static u32 arch_timer_rate;
+static u64 sched_clock_mult __read_mostly;
+static DEFINE_PER_CPU(struct clock_event_device, arch_timer_evt);
+static int arch_timer_ppi;
+
+static irqreturn_t arch_timer_handle_irq(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	if (ctrl & ARCH_TIMER_CTRL_ISTATUS) {
+		ctrl |= ARCH_TIMER_CTRL_IMASK;
+		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+		evt->event_handler(evt);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static void arch_timer_stop(void)
+{
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+}
+
+static void arch_timer_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *clk)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		arch_timer_stop();
+		break;
+	default:
+		break;
+	}
+}
+
+static int arch_timer_set_next_event(unsigned long evt,
+				     struct clock_event_device *unused)
+{
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	ctrl |= ARCH_TIMER_CTRL_ENABLE;
+	ctrl &= ~ARCH_TIMER_CTRL_IMASK;
+
+	arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt);
+	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+
+	return 0;
+}
+
+static void __cpuinit arch_timer_setup(struct clock_event_device *clk)
+{
+	/* Let's make sure the timer is off before doing anything else */
+	arch_timer_stop();
+
+	clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP;
+	clk->name = "arch_sys_timer";
+	clk->rating = 400;
+	clk->set_mode = arch_timer_set_mode;
+	clk->set_next_event = arch_timer_set_next_event;
+	clk->irq = arch_timer_ppi;
+	clk->cpumask = cpumask_of(smp_processor_id());
+
+	clockevents_config_and_register(clk, arch_timer_rate,
+					0xf, 0x7fffffff);
+
+	enable_percpu_irq(clk->irq, 0);
+
+	/* Ensure the physical counter is visible to userspace for the vDSO. */
+	arch_counter_enable_user_access();
+}
+
+static void __init arch_timer_calibrate(void)
+{
+	if (arch_timer_rate == 0) {
+		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0);
+		arch_timer_rate = arch_timer_reg_read(ARCH_TIMER_REG_FREQ);
+
+		/* Check the timer frequency. */
+		if (arch_timer_rate == 0)
+			panic("Architected timer frequency is set to zero.\n"
+			      "You must set this in your .dts file\n");
+	}
+
+	/* Cache the sched_clock multiplier to save a divide in the hot path. */
+
+	sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
+
+	pr_info("Architected local timer running at %u.%02uMHz.\n",
+		 arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100);
+}
+
+static cycle_t arch_counter_read(struct clocksource *cs)
+{
+	return arch_counter_get_cntpct();
+}
+
+static struct clocksource clocksource_counter = {
+	.name	= "arch_sys_counter",
+	.rating	= 400,
+	.read	= arch_counter_read,
+	.mask	= CLOCKSOURCE_MASK(56),
+	.flags	= (CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_VALID_FOR_HRES),
+};
+
+int read_current_timer(unsigned long *timer_value)
+{
+	*timer_value = arch_counter_get_cntpct();
+	return 0;
+}
+
+unsigned long long notrace sched_clock(void)
+{
+	return arch_counter_get_cntvct() * sched_clock_mult;
+}
+
+static int __cpuinit arch_timer_cpu_notify(struct notifier_block *self,
+					   unsigned long action, void *hcpu)
+{
+	int cpu = (long)hcpu;
+	struct clock_event_device *clk = per_cpu_ptr(&arch_timer_evt, cpu);
+
+	switch(action) {
+	case CPU_STARTING:
+	case CPU_STARTING_FROZEN:
+		arch_timer_setup(clk);
+		break;
+
+	case CPU_DYING:
+	case CPU_DYING_FROZEN:
+		pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
+			 clk->irq, cpu);
+		disable_percpu_irq(clk->irq);
+		arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata arch_timer_cpu_nb = {
+	.notifier_call = arch_timer_cpu_notify,
+};
+
+static const struct of_device_id arch_timer_of_match[] __initconst = {
+	{ .compatible = "arm,armv8-timer" },
+	{},
+};
+
+int __init arm_generic_timer_init(void)
+{
+	struct device_node *np;
+	int err;
+	u32 freq;
+
+	np = of_find_matching_node(NULL, arch_timer_of_match);
+	if (!np) {
+		pr_err("arch_timer: can't find DT node\n");
+		return -ENODEV;
+	}
+
+	/* Try to determine the frequency from the device tree or CNTFRQ */
+	if (!of_property_read_u32(np, "clock-frequency", &freq))
+		arch_timer_rate = freq;
+	arch_timer_calibrate();
+
+	arch_timer_ppi = irq_of_parse_and_map(np, 0);
+	pr_info("arch_timer: found %s irq %d\n", np->name, arch_timer_ppi);
+
+	err = request_percpu_irq(arch_timer_ppi, arch_timer_handle_irq,
+				 np->name, &arch_timer_evt);
+	if (err) {
+		pr_err("arch_timer: can't register interrupt %d (%d)\n",
+		       arch_timer_ppi, err);
+		return err;
+	}
+
+	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+
+	/* Calibrate the delay loop directly */
+	lpj_fine = arch_timer_rate / HZ;
+
+	/* Immediately configure the timer on the boot CPU */
+	arch_timer_setup(per_cpu_ptr(&arch_timer_evt, smp_processor_id()));
+
+	register_cpu_notifier(&arch_timer_cpu_nb);
+
+	return 0;
+}