Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Nothing exciting, just the usual pile of fixes, updates and cleanups:

   - A bunch of clocksource driver updates

   - Removal of CONFIG_TIMER_STATS and the related /proc file

   - More posix timer slim down work

   - A scalability enhancement in the tick broadcast code

   - Math cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  hrtimer: Catch invalid clockids again
  math64, tile: Fix build failure
  clocksource/drivers/arm_arch_timer:: Mark cyclecounter __ro_after_init
  timerfd: Protect the might cancel mechanism proper
  timer_list: Remove useless cast when printing
  time: Remove CONFIG_TIMER_STATS
  clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum 161010101
  clocksource/drivers/arm_arch_timer: Introduce generic errata handling infrastructure
  clocksource/drivers/arm_arch_timer: Remove fsl-a008585 parameter
  clocksource/drivers/arm_arch_timer: Add dt binding for hisilicon-161010101 erratum
  clocksource/drivers/ostm: Add renesas-ostm timer driver
  clocksource/drivers/ostm: Document renesas-ostm timer DT bindings
  clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock
  clocksource/drivers/gemini: Add driver for the Cortina Gemini
  clocksource: add DT bindings for Cortina Gemini
  clockevents: Add a clkevt-of mechanism like clksrc-of
  tick/broadcast: Reduce lock cacheline contention
  timers: Omit POSIX timer stuff from task_struct when disabled
  x86/timer: Make delay() work during early bootup
  delay: Add explanation of udelay() inaccuracy
  ...

1 files changed, 277 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-gemini.c b/drivers/clocksource/timer-gemini.c
new file mode 100644
index 000000000000..dda27b7bf1a1
--- /dev/null
+++ b/drivers/clocksource/timer-gemini.c
@@ -0,0 +1,277 @@
+/*
+ * Gemini timer driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on a rewrite of arch/arm/mach-gemini/timer.c:
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ */
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+
+/*
+ * Relevant registers in the global syscon
+ */
+#define GLOBAL_STATUS		0x04
+#define CPU_AHB_RATIO_MASK	(0x3 << 18)
+#define CPU_AHB_1_1		(0x0 << 18)
+#define CPU_AHB_3_2		(0x1 << 18)
+#define CPU_AHB_24_13		(0x2 << 18)
+#define CPU_AHB_2_1		(0x3 << 18)
+#define REG_TO_AHB_SPEED(reg)	((((reg) >> 15) & 0x7) * 10 + 130)
+
+/*
+ * Register definitions for the timers
+ */
+#define TIMER1_COUNT		(0x00)
+#define TIMER1_LOAD		(0x04)
+#define TIMER1_MATCH1		(0x08)
+#define TIMER1_MATCH2		(0x0c)
+#define TIMER2_COUNT		(0x10)
+#define TIMER2_LOAD		(0x14)
+#define TIMER2_MATCH1		(0x18)
+#define TIMER2_MATCH2		(0x1c)
+#define TIMER3_COUNT		(0x20)
+#define TIMER3_LOAD		(0x24)
+#define TIMER3_MATCH1		(0x28)
+#define TIMER3_MATCH2		(0x2c)
+#define TIMER_CR		(0x30)
+#define TIMER_INTR_STATE	(0x34)
+#define TIMER_INTR_MASK		(0x38)
+
+#define TIMER_1_CR_ENABLE	(1 << 0)
+#define TIMER_1_CR_CLOCK	(1 << 1)
+#define TIMER_1_CR_INT		(1 << 2)
+#define TIMER_2_CR_ENABLE	(1 << 3)
+#define TIMER_2_CR_CLOCK	(1 << 4)
+#define TIMER_2_CR_INT		(1 << 5)
+#define TIMER_3_CR_ENABLE	(1 << 6)
+#define TIMER_3_CR_CLOCK	(1 << 7)
+#define TIMER_3_CR_INT		(1 << 8)
+#define TIMER_1_CR_UPDOWN	(1 << 9)
+#define TIMER_2_CR_UPDOWN	(1 << 10)
+#define TIMER_3_CR_UPDOWN	(1 << 11)
+#define TIMER_DEFAULT_FLAGS	(TIMER_1_CR_UPDOWN | \
+				 TIMER_3_CR_ENABLE | \
+				 TIMER_3_CR_UPDOWN)
+
+#define TIMER_1_INT_MATCH1	(1 << 0)
+#define TIMER_1_INT_MATCH2	(1 << 1)
+#define TIMER_1_INT_OVERFLOW	(1 << 2)
+#define TIMER_2_INT_MATCH1	(1 << 3)
+#define TIMER_2_INT_MATCH2	(1 << 4)
+#define TIMER_2_INT_OVERFLOW	(1 << 5)
+#define TIMER_3_INT_MATCH1	(1 << 6)
+#define TIMER_3_INT_MATCH2	(1 << 7)
+#define TIMER_3_INT_OVERFLOW	(1 << 8)
+#define TIMER_INT_ALL_MASK	0x1ff
+
+static unsigned int tick_rate;
+static void __iomem *base;
+
+static u64 notrace gemini_read_sched_clock(void)
+{
+	return readl(base + TIMER3_COUNT);
+}
+
+static int gemini_timer_set_next_event(unsigned long cycles,
+				       struct clock_event_device *evt)
+{
+	u32 cr;
+
+	/* Setup the match register */
+	cr = readl(base + TIMER1_COUNT);
+	writel(cr + cycles, base + TIMER1_MATCH1);
+	if (readl(base + TIMER1_COUNT) - cr > cycles)
+		return -ETIME;
+
+	return 0;
+}
+
+static int gemini_timer_shutdown(struct clock_event_device *evt)
+{
+	u32 cr;
+
+	/*
+	 * Disable also for oneshot: the set_next() call will arm the timer
+	 * instead.
+	 */
+	/* Stop timer and interrupt. */
+	cr = readl(base + TIMER_CR);
+	cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
+	writel(cr, base + TIMER_CR);
+
+	/* Setup counter start from 0 */
+	writel(0, base + TIMER1_COUNT);
+	writel(0, base + TIMER1_LOAD);
+
+	/* enable interrupt */
+	cr = readl(base + TIMER_INTR_MASK);
+	cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
+	cr |= TIMER_1_INT_MATCH1;
+	writel(cr, base + TIMER_INTR_MASK);
+
+	/* start the timer */
+	cr = readl(base + TIMER_CR);
+	cr |= TIMER_1_CR_ENABLE;
+	writel(cr, base + TIMER_CR);
+
+	return 0;
+}
+
+static int gemini_timer_set_periodic(struct clock_event_device *evt)
+{
+	u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
+	u32 cr;
+
+	/* Stop timer and interrupt */
+	cr = readl(base + TIMER_CR);
+	cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
+	writel(cr, base + TIMER_CR);
+
+	/* Setup timer to fire at 1/HT intervals. */
+	cr = 0xffffffff - (period - 1);
+	writel(cr, base + TIMER1_COUNT);
+	writel(cr, base + TIMER1_LOAD);
+
+	/* enable interrupt on overflow */
+	cr = readl(base + TIMER_INTR_MASK);
+	cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
+	cr |= TIMER_1_INT_OVERFLOW;
+	writel(cr, base + TIMER_INTR_MASK);
+
+	/* Start the timer */
+	cr = readl(base + TIMER_CR);
+	cr |= TIMER_1_CR_ENABLE;
+	cr |= TIMER_1_CR_INT;
+	writel(cr, base + TIMER_CR);
+
+	return 0;
+}
+
+/* Use TIMER1 as clock event */
+static struct clock_event_device gemini_clockevent = {
+	.name			= "TIMER1",
+	/* Reasonably fast and accurate clock event */
+	.rating			= 300,
+	.shift                  = 32,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= gemini_timer_set_next_event,
+	.set_state_shutdown	= gemini_timer_shutdown,
+	.set_state_periodic	= gemini_timer_set_periodic,
+	.set_state_oneshot	= gemini_timer_shutdown,
+	.tick_resume		= gemini_timer_shutdown,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &gemini_clockevent;
+
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction gemini_timer_irq = {
+	.name		= "Gemini Timer Tick",
+	.flags		= IRQF_TIMER,
+	.handler	= gemini_timer_interrupt,
+};
+
+static int __init gemini_timer_of_init(struct device_node *np)
+{
+	static struct regmap *map;
+	int irq;
+	int ret;
+	u32 val;
+
+	map = syscon_regmap_lookup_by_phandle(np, "syscon");
+	if (IS_ERR(map)) {
+		pr_err("Can't get regmap for syscon handle");
+		return -ENODEV;
+	}
+	ret = regmap_read(map, GLOBAL_STATUS, &val);
+	if (ret) {
+		pr_err("Can't read syscon status register");
+		return -ENXIO;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("Can't remap registers");
+		return -ENXIO;
+	}
+	/* IRQ for timer 1 */
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq <= 0) {
+		pr_err("Can't parse IRQ");
+		return -EINVAL;
+	}
+
+	tick_rate = REG_TO_AHB_SPEED(val) * 1000000;
+	printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
+
+	tick_rate /= 6;		/* APB bus run AHB*(1/6) */
+
+	switch (val & CPU_AHB_RATIO_MASK) {
+	case CPU_AHB_1_1:
+		printk(KERN_CONT "(1/1)\n");
+		break;
+	case CPU_AHB_3_2:
+		printk(KERN_CONT "(3/2)\n");
+		break;
+	case CPU_AHB_24_13:
+		printk(KERN_CONT "(24/13)\n");
+		break;
+	case CPU_AHB_2_1:
+		printk(KERN_CONT "(2/1)\n");
+		break;
+	}
+
+	/*
+	 * Reset the interrupt mask and status
+	 */
+	writel(TIMER_INT_ALL_MASK, base + TIMER_INTR_MASK);
+	writel(0, base + TIMER_INTR_STATE);
+	writel(TIMER_DEFAULT_FLAGS, base + TIMER_CR);
+
+	/*
+	 * Setup free-running clocksource timer (interrupts
+	 * disabled.)
+	 */
+	writel(0, base + TIMER3_COUNT);
+	writel(0, base + TIMER3_LOAD);
+	writel(0, base + TIMER3_MATCH1);
+	writel(0, base + TIMER3_MATCH2);
+	clocksource_mmio_init(base + TIMER3_COUNT,
+			      "gemini_clocksource", tick_rate,
+			      300, 32, clocksource_mmio_readl_up);
+	sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
+
+	/*
+	 * Setup clockevent timer (interrupt-driven.)
+	 */
+	writel(0, base + TIMER1_COUNT);
+	writel(0, base + TIMER1_LOAD);
+	writel(0, base + TIMER1_MATCH1);
+	writel(0, base + TIMER1_MATCH2);
+	setup_irq(irq, &gemini_timer_irq);
+	gemini_clockevent.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&gemini_clockevent, tick_rate,
+					1, 0xffffffff);
+
+	return 0;
+}
+CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "cortina,gemini-timer",
+		       gemini_timer_of_init);