Merge tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timekeeping and timer updates from Thomas Gleixner:
 "Core:

   - Consolidation of the vDSO build infrastructure to address the
     difficulties of cross-builds for ARM64 compat vDSO libraries by
     restricting the exposure of header content to the vDSO build.

     This is achieved by splitting out header content into separate
     headers. which contain only the minimaly required information which
     is necessary to build the vDSO. These new headers are included from
     the kernel headers and the vDSO specific files.

   - Enhancements to the generic vDSO library allowing more fine grained
     control over the compiled in code, further reducing architecture
     specific storage and preparing for adopting the generic library by
     PPC.

   - Cleanup and consolidation of the exit related code in posix CPU
     timers.

   - Small cleanups and enhancements here and there

  Drivers:

   - The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support

   - Correct the clock rate of PIT64b global clock

   - setup_irq() cleanup

   - Preparation for PWM and suspend support for the TI DM timer

   - Expand the fttmr010 driver to support ast2600 systems

   - The usual small fixes, enhancements and cleanups all over the
     place"

* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
  Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
  vdso: Fix clocksource.h macro detection
  um: Fix header inclusion
  arm64: vdso32: Enable Clang Compilation
  lib/vdso: Enable common headers
  arm: vdso: Enable arm to use common headers
  x86/vdso: Enable x86 to use common headers
  mips: vdso: Enable mips to use common headers
  arm64: vdso32: Include common headers in the vdso library
  arm64: vdso: Include common headers in the vdso library
  arm64: Introduce asm/vdso/processor.h
  arm64: vdso32: Code clean up
  linux/elfnote.h: Replace elf.h with UAPI equivalent
  scripts: Fix the inclusion order in modpost
  common: Introduce processor.h
  linux/ktime.h: Extract common header for vDSO
  linux/jiffies.h: Extract common header for vDSO
  linux/time64.h: Extract common header for vDSO
  linux/time32.h: Extract common header for vDSO
  linux/time.h: Extract common header for vDSO
  ...

1 files changed, 53 insertions, 15 deletions

diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
index fadff7915dd9..edb1d5f193f5 100644
--- a/drivers/clocksource/timer-fttmr010.c
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -38,6 +38,11 @@
 #define TIMER_CR		(0x30)
 
 /*
+ * Control register set to clear for ast2600 only.
+ */
+#define AST2600_TIMER_CR_CLR	(0x3c)
+
+/*
  * Control register (TMC30) bit fields for fttmr010/gemini/moxart timers.
  */
 #define TIMER_1_CR_ENABLE	BIT(0)
@@ -97,6 +102,7 @@ struct fttmr010 {
 	bool is_aspeed;
 	u32 t1_enable_val;
 	struct clock_event_device clkevt;
+	int (*timer_shutdown)(struct clock_event_device *evt);
 #ifdef CONFIG_ARM
 	struct delay_timer delay_timer;
 #endif
@@ -140,9 +146,7 @@ static int fttmr010_timer_set_next_event(unsigned long cycles,
 	u32 cr;
 
 	/* Stop */
-	cr = readl(fttmr010->base + TIMER_CR);
-	cr &= ~fttmr010->t1_enable_val;
-	writel(cr, fttmr010->base + TIMER_CR);
+	fttmr010->timer_shutdown(evt);
 
 	if (fttmr010->is_aspeed) {
 		/*
@@ -164,6 +168,16 @@ static int fttmr010_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
+static int ast2600_timer_shutdown(struct clock_event_device *evt)
+{
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
+
+	/* Stop */
+	writel(fttmr010->t1_enable_val, fttmr010->base + AST2600_TIMER_CR_CLR);
+
+	return 0;
+}
+
 static int fttmr010_timer_shutdown(struct clock_event_device *evt)
 {
 	struct fttmr010 *fttmr010 = to_fttmr010(evt);
@@ -183,9 +197,7 @@ static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)
 	u32 cr;
 
 	/* Stop */
-	cr = readl(fttmr010->base + TIMER_CR);
-	cr &= ~fttmr010->t1_enable_val;
-	writel(cr, fttmr010->base + TIMER_CR);
+	fttmr010->timer_shutdown(evt);
 
 	/* Setup counter start from 0 or ~0 */
 	writel(0, fttmr010->base + TIMER1_COUNT);
@@ -211,9 +223,7 @@ static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
 	u32 cr;
 
 	/* Stop */
-	cr = readl(fttmr010->base + TIMER_CR);
-	cr &= ~fttmr010->t1_enable_val;
-	writel(cr, fttmr010->base + TIMER_CR);
+	fttmr010->timer_shutdown(evt);
 
 	/* Setup timer to fire at 1/HZ intervals. */
 	if (fttmr010->is_aspeed) {
@@ -249,7 +259,21 @@ static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
+static irqreturn_t ast2600_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
+
+	writel(0x1, fttmr010->base + TIMER_INTR_STATE);
+
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static int __init fttmr010_common_init(struct device_node *np,
+		bool is_aspeed,
+		int (*timer_shutdown)(struct clock_event_device *),
+		irq_handler_t irq_handler)
 {
 	struct fttmr010 *fttmr010;
 	int irq;
@@ -350,6 +374,8 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 				     fttmr010->tick_rate);
 	}
 
+	fttmr010->timer_shutdown = timer_shutdown;
+
 	/*
 	 * Setup clockevent timer (interrupt-driven) on timer 1.
 	 */
@@ -357,7 +383,7 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 	writel(0, fttmr010->base + TIMER1_LOAD);
 	writel(0, fttmr010->base + TIMER1_MATCH1);
 	writel(0, fttmr010->base + TIMER1_MATCH2);
-	ret = request_irq(irq, fttmr010_timer_interrupt, IRQF_TIMER,
+	ret = request_irq(irq, irq_handler, IRQF_TIMER,
 			  "FTTMR010-TIMER1", &fttmr010->clkevt);
 	if (ret) {
 		pr_err("FTTMR010-TIMER1 no IRQ\n");
@@ -370,10 +396,10 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 	fttmr010->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
 		CLOCK_EVT_FEAT_ONESHOT;
 	fttmr010->clkevt.set_next_event = fttmr010_timer_set_next_event;
-	fttmr010->clkevt.set_state_shutdown = fttmr010_timer_shutdown;
+	fttmr010->clkevt.set_state_shutdown = fttmr010->timer_shutdown;
 	fttmr010->clkevt.set_state_periodic = fttmr010_timer_set_periodic;
 	fttmr010->clkevt.set_state_oneshot = fttmr010_timer_set_oneshot;
-	fttmr010->clkevt.tick_resume = fttmr010_timer_shutdown;
+	fttmr010->clkevt.tick_resume = fttmr010->timer_shutdown;
 	fttmr010->clkevt.cpumask = cpumask_of(0);
 	fttmr010->clkevt.irq = irq;
 	clockevents_config_and_register(&fttmr010->clkevt,
@@ -404,14 +430,25 @@ out_disable_clock:
 	return ret;
 }
 
+static __init int ast2600_timer_init(struct device_node *np)
+{
+	return fttmr010_common_init(np, true,
+			ast2600_timer_shutdown,
+			ast2600_timer_interrupt);
+}
+
 static __init int aspeed_timer_init(struct device_node *np)
 {
-	return fttmr010_common_init(np, true);
+	return fttmr010_common_init(np, true,
+			fttmr010_timer_shutdown,
+			fttmr010_timer_interrupt);
 }
 
 static __init int fttmr010_timer_init(struct device_node *np)
 {
-	return fttmr010_common_init(np, false);
+	return fttmr010_common_init(np, false,
+			fttmr010_timer_shutdown,
+			fttmr010_timer_interrupt);
 }
 
 TIMER_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
@@ -419,3 +456,4 @@ TIMER_OF_DECLARE(gemini, "cortina,gemini-timer", fttmr010_timer_init);
 TIMER_OF_DECLARE(moxart, "moxa,moxart-timer", fttmr010_timer_init);
 TIMER_OF_DECLARE(ast2400, "aspeed,ast2400-timer", aspeed_timer_init);
 TIMER_OF_DECLARE(ast2500, "aspeed,ast2500-timer", aspeed_timer_init);
+TIMER_OF_DECLARE(ast2600, "aspeed,ast2600-timer", ast2600_timer_init);