diff options
author | Douglas Anderson <dianders@chromium.org> | 2019-04-11 06:55:55 -0700 |
---|---|---|
committer | Heiko Stuebner <heiko@sntech.de> | 2019-04-12 11:27:46 +0200 |
commit | 00c0cd9e59d265b393553e9afa54fee8b10e8158 (patch) | |
tree | f7a0731697617c9f2b10ca7851067cf355073417 /drivers/clk | |
parent | dfe7fb21cd9e730230d55a79bc72cf2ece67cdd5 (diff) | |
download | linux-00c0cd9e59d265b393553e9afa54fee8b10e8158.tar.bz2 |
clk: rockchip: Fix video codec clocks on rk3288
It appears that there is a typo in the rk3288 TRM. For
GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's
the other way around.
How do I know? Here's my evidence:
1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec
using the new muxgrf type on rk3288") we always pretended that we
were using "aclk_vdpu" and the comment in the code said that this
matched the default setting in the system. In fact the default
setting is 0 according to the TRM and according to reading memory
at bootup. In addition rk3288-based Chromebooks ran like this and
the video codecs worked.
2. With the existing clock code if you boot up and try to enable the
new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused"
on the command line), you get errors like "failed to get ack on
domain 'pd_video', val=0x80208". After flipping vepu/vdpu things
init OK.
3. If I export and add both the vepu and vdpu to the list of clocks
for RK3288_PD_VIDEO I can get past the power domain errors, but now
I freeze when the vpu_mmu gets initted.
4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up
and probes OK showing that somehow the "vdpu" was important to keep
enabled. This is because we were actually using it as a parent.
5. After this change I can hack "aclk_vcodec_pre" to parent from
"aclk_vepu" using assigned-clocks and the video codec still probes
OK.
6. Rockchip has said so on the mailing list [1].
...so let's fix it.
Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested
by Jonas Karlman. Prior to the same commit you could do
clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu".
That's because "aclk_vcodec" was a simple gate clock (always gets
CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu". After
that commit "aclk_vcodec_pre" gets in the way so we need to add
CLK_SET_RATE_PARENT to it too.
[1] https://lkml.kernel.org/r/1d17b015-9e17-34b9-baf8-c285dc1957aa@rock-chips.com
Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Suggested-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Diffstat (limited to 'drivers/clk')
-rw-r--r-- | drivers/clk/rockchip/clk-rk3288.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index f47d514cba36..94cbcb0aa49f 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -219,7 +219,7 @@ PNAME(mux_hsadcout_p) = { "hsadc_src", "ext_hsadc" }; PNAME(mux_edp_24m_p) = { "ext_edp_24m", "xin24m" }; PNAME(mux_tspout_p) = { "cpll", "gpll", "npll", "xin27m" }; -PNAME(mux_aclk_vcodec_pre_p) = { "aclk_vepu", "aclk_vdpu" }; +PNAME(mux_aclk_vcodec_pre_p) = { "aclk_vdpu", "aclk_vepu" }; PNAME(mux_usbphy480m_p) = { "sclk_otgphy1_480m", "sclk_otgphy2_480m", "sclk_otgphy0_480m" }; PNAME(mux_hsicphy480m_p) = { "cpll", "gpll", "usbphy480m_src" }; @@ -420,7 +420,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0, RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(3), 11, GFLAGS), - MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, 0, + MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, CLK_SET_RATE_PARENT, RK3288_GRF_SOC_CON(0), 7, 1, MFLAGS), GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vcodec_pre", 0, RK3288_CLKGATE_CON(9), 0, GFLAGS), |