clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2

Meson8m2 has a GP_PLL clock (similar to GP0_PLL on GXBB/GXL/GXM) which
is used as input for the VPU clocks.
The only supported frequency (based on Amlogic's vendor kernel sources)
is 364MHz which is achieved using the following parameters:
- input: XTAL (24MHz)
- M = 182
- N = 3
- OD = 2 ^ 2

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190324151104.18397-4-martin.blumenstingl@googlemail.com

2 files changed, 66 insertions, 1 deletions

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index c9e6ec67d649..0d08f1ef7af8 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1703,6 +1703,64 @@ static struct clk_regmap meson8b_mali = {
 	},
 };
 
+static const struct pll_params_table meson8m2_gp_pll_params_table[] = {
+	PLL_PARAMS(182, 3),
+	{ /* sentinel */ },
+};
+
+static struct clk_regmap meson8m2_gp_pll_dco = {
+	.data = &(struct meson_clk_pll_data){
+		.en = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 30,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 0,
+			.width   = 9,
+		},
+		.n = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 9,
+			.width   = 5,
+		},
+		.l = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = meson8m2_gp_pll_params_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp_pll_dco",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap meson8m2_gp_pll = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_GP_PLL_CNTL,
+		.shift = 16,
+		.width = 2,
+		.flags = CLK_DIVIDER_POWER_OF_TWO,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp_pll",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "gp_pll_dco" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 
 static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
@@ -2338,6 +2396,8 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
 		[CLKID_MALI_1_DIV]	    = &meson8b_mali_1_div.hw,
 		[CLKID_MALI_1]		    = &meson8b_mali_1.hw,
 		[CLKID_MALI]		    = &meson8b_mali.hw,
+		[CLKID_GP_PLL_DCO]	    = &meson8m2_gp_pll_dco.hw,
+		[CLKID_GP_PLL]		    = &meson8m2_gp_pll.hw,
 		[CLK_NR_CLKS]		    = NULL,
 	},
 	.num = CLK_NR_CLKS,
@@ -2500,6 +2560,8 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
 	&meson8b_mali_1_div,
 	&meson8b_mali_1,
 	&meson8b_mali,
+	&meson8m2_gp_pll_dco,
+	&meson8m2_gp_pll,
 };
 
 static const struct meson8b_clk_reset_line {
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index b8c58faeae52..a45f7102c558 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -19,6 +19,7 @@
  *
  * [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
  */
+#define HHI_GP_PLL_CNTL			0x40  /* 0x10 offset in data sheet */
 #define HHI_VIID_CLK_DIV		0x128 /* 0x4a offset in data sheet */
 #define HHI_VIID_CLK_CNTL		0x12c /* 0x4b offset in data sheet */
 #define HHI_GCLK_MPEG0			0x140 /* 0x50 offset in data sheet */
@@ -146,8 +147,10 @@
 #define CLKID_MALI_1_SEL	178
 #define CLKID_MALI_1_DIV	179
 #define CLKID_MALI_1		180
+#define CLKID_GP_PLL_DCO	181
+#define CLKID_GP_PLL		182
 
-#define CLK_NR_CLKS		181
+#define CLK_NR_CLKS		183
 
 /*
  * include the CLKID and RESETID that have