ARM: u300: move the gated system controller clocks to DT

This moves the slow, fast, AHB bridge and "rest" clocks on
the U300 system controller over to registration from the
device tree.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 211 insertions, 109 deletions

diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
index bebd6c973d4b..5f234d37ccbe 100644
--- a/drivers/clk/clk-u300.c
+++ b/drivers/clk/clk-u300.c
@@ -728,6 +728,213 @@ syscon_clk_register(struct device *dev, const char *name,
 	return clk;
 }
 
+#define U300_CLK_TYPE_SLOW 0
+#define U300_CLK_TYPE_FAST 1
+#define U300_CLK_TYPE_REST 2
+
+/**
+ * struct u300_clock - defines the bits and pieces for a certain clock
+ * @type: the clock type, slow fast or rest
+ * @id: the bit in the slow/fast/rest register for this clock
+ * @hw_ctrld: whether the clock is hardware controlled
+ * @clk_val: a value to poke in the one-write enable/disable registers
+ */
+struct u300_clock {
+	u8 type;
+	u8 id;
+	bool hw_ctrld;
+	u16 clk_val;
+};
+
+struct u300_clock const __initconst u300_clk_lookup[] = {
+	{
+		.type = U300_CLK_TYPE_REST,
+		.id = 3,
+		.hw_ctrld = true,
+		.clk_val = U300_SYSCON_SBCER_CPU_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_REST,
+		.id = 4,
+		.hw_ctrld = true,
+		.clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_REST,
+		.id = 5,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_REST,
+		.id = 6,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_REST,
+		.id = 8,
+		.hw_ctrld = true,
+		.clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_REST,
+		.id = 9,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_REST,
+		.id = 10,
+		.hw_ctrld = true,
+		.clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_REST,
+		.id = 12,
+		.hw_ctrld = false,
+		/* INTCON: cannot be enabled, just taken out of reset */
+		.clk_val = 0xFFFFU,
+	},
+	{
+		.type = U300_CLK_TYPE_FAST,
+		.id = 0,
+		.hw_ctrld = true,
+		.clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_FAST,
+		.id = 1,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_FAST,
+		.id = 2,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_FAST,
+		.id = 5,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_MMC_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_FAST,
+		.id = 6,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_SPI_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_SLOW,
+		.id = 0,
+		.hw_ctrld = true,
+		.clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_SLOW,
+		.id = 1,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_UART_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_SLOW,
+		.id = 4,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_SLOW,
+		.id = 6,
+		.hw_ctrld = true,
+		/* No clock enable register bit */
+		.clk_val = 0xFFFFU,
+	},
+	{
+		.type = U300_CLK_TYPE_SLOW,
+		.id = 7,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
+	},
+	{
+		.type = U300_CLK_TYPE_SLOW,
+		.id = 8,
+		.hw_ctrld = false,
+		.clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
+	},
+};
+
+static void __init of_u300_syscon_clk_init(struct device_node *np)
+{
+	struct clk *clk = ERR_PTR(-EINVAL);
+	const char *clk_name = np->name;
+	const char *parent_name;
+	void __iomem *res_reg;
+	void __iomem *en_reg;
+	u32 clk_type;
+	u32 clk_id;
+	int i;
+
+	if (of_property_read_u32(np, "clock-type", &clk_type)) {
+		pr_err("%s: syscon clock \"%s\" missing clock-type property\n",
+		       __func__, clk_name);
+		return;
+	}
+	if (of_property_read_u32(np, "clock-id", &clk_id)) {
+		pr_err("%s: syscon clock \"%s\" missing clock-id property\n",
+		       __func__, clk_name);
+		return;
+	}
+	parent_name = of_clk_get_parent_name(np, 0);
+
+	switch (clk_type) {
+	case U300_CLK_TYPE_SLOW:
+		res_reg = syscon_vbase + U300_SYSCON_RSR;
+		en_reg = syscon_vbase + U300_SYSCON_CESR;
+		break;
+	case U300_CLK_TYPE_FAST:
+		res_reg = syscon_vbase + U300_SYSCON_RFR;
+		en_reg = syscon_vbase + U300_SYSCON_CEFR;
+		break;
+	case U300_CLK_TYPE_REST:
+		res_reg = syscon_vbase + U300_SYSCON_RRR;
+		en_reg = syscon_vbase + U300_SYSCON_CERR;
+		break;
+	default:
+		pr_err("unknown clock type %x specified\n", clk_type);
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(u300_clk_lookup); i++) {
+		const struct u300_clock *u3clk = &u300_clk_lookup[i];
+
+		if (u3clk->type == clk_type && u3clk->id == clk_id)
+			clk = syscon_clk_register(NULL,
+						  clk_name, parent_name,
+						  0, u3clk->hw_ctrld,
+						  res_reg, u3clk->id,
+						  en_reg, u3clk->id,
+						  u3clk->clk_val);
+	}
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(np, of_clk_src_simple_get, clk);
+
+		/*
+		 * Some few system clocks - device tree does not
+		 * represent clocks without a corresponding device node.
+		 * for now we add these three clocks here.
+		 */
+		if (clk_type == U300_CLK_TYPE_REST && clk_id == 5)
+			clk_register_clkdev(clk, NULL, "pl172");
+		if (clk_type == U300_CLK_TYPE_REST && clk_id == 9)
+			clk_register_clkdev(clk, NULL, "semi");
+		if (clk_type == U300_CLK_TYPE_REST && clk_id == 12)
+			clk_register_clkdev(clk, NULL, "intcon");
+	}
+}
+
 /**
  * struct clk_mclk - U300 MCLK clock (MMC/SD clock)
  * @hw: corresponding clock hardware entry
@@ -941,6 +1148,10 @@ static const __initconst struct of_device_id u300_clk_match[] = {
 		.compatible = "fixed-factor-clock",
 		.data = of_fixed_factor_clk_setup,
 	},
+	{
+		.compatible = "stericsson,u300-syscon-clk",
+		.data = of_u300_syscon_clk_init,
+	},
 };
 
 void __init u300_clk_init(void __iomem *base)
@@ -965,115 +1176,6 @@ void __init u300_clk_init(void __iomem *base)
 
 	of_clk_init(u300_clk_match);
 
-	/* Directly on the AMBA interconnect */
-	clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true,
-				  syscon_vbase + U300_SYSCON_RRR, 3,
-				  syscon_vbase + U300_SYSCON_CERR, 3,
-				  U300_SYSCON_SBCER_CPU_CLK_EN);
-	clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true,
-				  syscon_vbase + U300_SYSCON_RRR, 4,
-				  syscon_vbase + U300_SYSCON_CERR, 4,
-				  U300_SYSCON_SBCER_DMAC_CLK_EN);
-	clk_register_clkdev(clk, NULL, "dma");
-	clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RRR, 6,
-				  syscon_vbase + U300_SYSCON_CERR, 6,
-				  U300_SYSCON_SBCER_NANDIF_CLK_EN);
-	clk_register_clkdev(clk, NULL, "fsmc-nand");
-	clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true,
-				  syscon_vbase + U300_SYSCON_RRR, 8,
-				  syscon_vbase + U300_SYSCON_CERR, 8,
-				  U300_SYSCON_SBCER_XGAM_CLK_EN);
-	clk_register_clkdev(clk, NULL, "xgam");
-	clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RRR, 9,
-				  syscon_vbase + U300_SYSCON_CERR, 9,
-				  U300_SYSCON_SBCER_SEMI_CLK_EN);
-	clk_register_clkdev(clk, NULL, "semi");
-
-	/* AHB bridge clocks */
-	clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true,
-				  syscon_vbase + U300_SYSCON_RRR, 10,
-				  syscon_vbase + U300_SYSCON_CERR, 10,
-				  U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN);
-	clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RRR, 12,
-				  syscon_vbase + U300_SYSCON_CERR, 12,
-				  /* Cannot be enabled, just taken out of reset */
-				  0xFFFFU);
-	clk_register_clkdev(clk, NULL, "intcon");
-	clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RRR, 5,
-				  syscon_vbase + U300_SYSCON_CERR, 5,
-				  U300_SYSCON_SBCER_EMIF_CLK_EN);
-	clk_register_clkdev(clk, NULL, "pl172");
-
-	/* FAST bridge clocks */
-	clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true,
-				  syscon_vbase + U300_SYSCON_RFR, 0,
-				  syscon_vbase + U300_SYSCON_CEFR, 0,
-				  U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN);
-	clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RFR, 1,
-				  syscon_vbase + U300_SYSCON_CEFR, 1,
-				  U300_SYSCON_SBCER_I2C0_CLK_EN);
-	clk_register_clkdev(clk, NULL, "stu300.0");
-	clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RFR, 2,
-				  syscon_vbase + U300_SYSCON_CEFR, 2,
-				  U300_SYSCON_SBCER_I2C1_CLK_EN);
-	clk_register_clkdev(clk, NULL, "stu300.1");
-	clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RFR, 5,
-				  syscon_vbase + U300_SYSCON_CEFR, 5,
-				  U300_SYSCON_SBCER_MMC_CLK_EN);
-	clk_register_clkdev(clk, "apb_pclk", "mmci");
-	clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RFR, 6,
-				  syscon_vbase + U300_SYSCON_CEFR, 6,
-				  U300_SYSCON_SBCER_SPI_CLK_EN);
-	/* The SPI has no external clock for the outward bus, uses the pclk */
-	clk_register_clkdev(clk, NULL, "pl022");
-	clk_register_clkdev(clk, "apb_pclk", "pl022");
-
-	/* SLOW bridge clocks */
-	clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true,
-				  syscon_vbase + U300_SYSCON_RSR, 0,
-				  syscon_vbase + U300_SYSCON_CESR, 0,
-				  U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN);
-	clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RSR, 1,
-				  syscon_vbase + U300_SYSCON_CESR, 1,
-				  U300_SYSCON_SBCER_UART_CLK_EN);
-	/* Same clock is used for APB and outward bus */
-	clk_register_clkdev(clk, NULL, "uart0");
-	clk_register_clkdev(clk, "apb_pclk", "uart0");
-	clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RSR, 4,
-				  syscon_vbase + U300_SYSCON_CESR, 4,
-				  U300_SYSCON_SBCER_GPIO_CLK_EN);
-	clk_register_clkdev(clk, NULL, "u300-gpio");
-	clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RSR, 5,
-				  syscon_vbase + U300_SYSCON_CESR, 6,
-				  U300_SYSCON_SBCER_KEYPAD_CLK_EN);
-	clk_register_clkdev(clk, NULL, "coh901461-keypad");
-	clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true,
-				  syscon_vbase + U300_SYSCON_RSR, 6,
-				  /* No clock enable register bit */
-				  NULL, 0, 0xFFFFU);
-	clk_register_clkdev(clk, NULL, "rtc-coh901331");
-	clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RSR, 7,
-				  syscon_vbase + U300_SYSCON_CESR, 7,
-				  U300_SYSCON_SBCER_APP_TMR_CLK_EN);
-	clk_register_clkdev(clk, NULL, "apptimer");
-	clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false,
-				  syscon_vbase + U300_SYSCON_RSR, 8,
-				  syscon_vbase + U300_SYSCON_CESR, 8,
-				  U300_SYSCON_SBCER_ACC_TMR_CLK_EN);
-	clk_register_clkdev(clk, NULL, "timer");
-
 	/* Then this special MMC/SD clock */
 	clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false);
 	clk_register_clkdev(clk, NULL, "mmci");