ARM: spear: make clock driver independent of headers

Device drivers should not access MMIO registers through hardcoded
platform specific address constants. Instead, we can pass the
MMIO token to the spear clock driver in the initialization routine
to contain that knowledge in the platform code itself.

Ideally, the clock driver would use of_iomap() or similar to
get the address, and that can be used later, but for now, this
is the minimal change.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

1 files changed, 31 insertions, 33 deletions

diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c
index ed9af4278619..aedbbe12f321 100644
--- a/drivers/clk/spear/spear1310_clock.c
+++ b/drivers/clk/spear/spear1310_clock.c
@@ -17,12 +17,10 @@
 #include <linux/io.h>
 #include <linux/of_platform.h>
 #include <linux/spinlock_types.h>
-#include <mach/spear.h>
 #include "clk.h"
 
-#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
 /* PLL related registers and bit values */
-#define SPEAR1310_PLL_CFG			(VA_MISC_BASE + 0x210)
+#define SPEAR1310_PLL_CFG			(misc_base + 0x210)
 	/* PLL_CFG bit values */
 	#define SPEAR1310_CLCD_SYNT_CLK_MASK		1
 	#define SPEAR1310_CLCD_SYNT_CLK_SHIFT		31
@@ -35,15 +33,15 @@
 	#define SPEAR1310_PLL2_CLK_SHIFT		22
 	#define SPEAR1310_PLL1_CLK_SHIFT		20
 
-#define SPEAR1310_PLL1_CTR			(VA_MISC_BASE + 0x214)
-#define SPEAR1310_PLL1_FRQ			(VA_MISC_BASE + 0x218)
-#define SPEAR1310_PLL2_CTR			(VA_MISC_BASE + 0x220)
-#define SPEAR1310_PLL2_FRQ			(VA_MISC_BASE + 0x224)
-#define SPEAR1310_PLL3_CTR			(VA_MISC_BASE + 0x22C)
-#define SPEAR1310_PLL3_FRQ			(VA_MISC_BASE + 0x230)
-#define SPEAR1310_PLL4_CTR			(VA_MISC_BASE + 0x238)
-#define SPEAR1310_PLL4_FRQ			(VA_MISC_BASE + 0x23C)
-#define SPEAR1310_PERIP_CLK_CFG			(VA_MISC_BASE + 0x244)
+#define SPEAR1310_PLL1_CTR			(misc_base + 0x214)
+#define SPEAR1310_PLL1_FRQ			(misc_base + 0x218)
+#define SPEAR1310_PLL2_CTR			(misc_base + 0x220)
+#define SPEAR1310_PLL2_FRQ			(misc_base + 0x224)
+#define SPEAR1310_PLL3_CTR			(misc_base + 0x22C)
+#define SPEAR1310_PLL3_FRQ			(misc_base + 0x230)
+#define SPEAR1310_PLL4_CTR			(misc_base + 0x238)
+#define SPEAR1310_PLL4_FRQ			(misc_base + 0x23C)
+#define SPEAR1310_PERIP_CLK_CFG			(misc_base + 0x244)
 	/* PERIP_CLK_CFG bit values */
 	#define SPEAR1310_GPT_OSC24_VAL			0
 	#define SPEAR1310_GPT_APB_VAL			1
@@ -65,7 +63,7 @@
 	#define SPEAR1310_C3_CLK_MASK			1
 	#define SPEAR1310_C3_CLK_SHIFT			1
 
-#define SPEAR1310_GMAC_CLK_CFG			(VA_MISC_BASE + 0x248)
+#define SPEAR1310_GMAC_CLK_CFG			(misc_base + 0x248)
 	#define SPEAR1310_GMAC_PHY_IF_SEL_MASK		3
 	#define SPEAR1310_GMAC_PHY_IF_SEL_SHIFT		4
 	#define SPEAR1310_GMAC_PHY_CLK_MASK		1
@@ -73,7 +71,7 @@
 	#define SPEAR1310_GMAC_PHY_INPUT_CLK_MASK	2
 	#define SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT	1
 
-#define SPEAR1310_I2S_CLK_CFG			(VA_MISC_BASE + 0x24C)
+#define SPEAR1310_I2S_CLK_CFG			(misc_base + 0x24C)
 	/* I2S_CLK_CFG register mask */
 	#define SPEAR1310_I2S_SCLK_X_MASK		0x1F
 	#define SPEAR1310_I2S_SCLK_X_SHIFT		27
@@ -91,21 +89,21 @@
 	#define SPEAR1310_I2S_SRC_CLK_MASK		2
 	#define SPEAR1310_I2S_SRC_CLK_SHIFT		0
 
-#define SPEAR1310_C3_CLK_SYNT			(VA_MISC_BASE + 0x250)
-#define SPEAR1310_UART_CLK_SYNT			(VA_MISC_BASE + 0x254)
-#define SPEAR1310_GMAC_CLK_SYNT			(VA_MISC_BASE + 0x258)
-#define SPEAR1310_SDHCI_CLK_SYNT		(VA_MISC_BASE + 0x25C)
-#define SPEAR1310_CFXD_CLK_SYNT			(VA_MISC_BASE + 0x260)
-#define SPEAR1310_ADC_CLK_SYNT			(VA_MISC_BASE + 0x264)
-#define SPEAR1310_AMBA_CLK_SYNT			(VA_MISC_BASE + 0x268)
-#define SPEAR1310_CLCD_CLK_SYNT			(VA_MISC_BASE + 0x270)
-#define SPEAR1310_RAS_CLK_SYNT0			(VA_MISC_BASE + 0x280)
-#define SPEAR1310_RAS_CLK_SYNT1			(VA_MISC_BASE + 0x288)
-#define SPEAR1310_RAS_CLK_SYNT2			(VA_MISC_BASE + 0x290)
-#define SPEAR1310_RAS_CLK_SYNT3			(VA_MISC_BASE + 0x298)
+#define SPEAR1310_C3_CLK_SYNT			(misc_base + 0x250)
+#define SPEAR1310_UART_CLK_SYNT			(misc_base + 0x254)
+#define SPEAR1310_GMAC_CLK_SYNT			(misc_base + 0x258)
+#define SPEAR1310_SDHCI_CLK_SYNT		(misc_base + 0x25C)
+#define SPEAR1310_CFXD_CLK_SYNT			(misc_base + 0x260)
+#define SPEAR1310_ADC_CLK_SYNT			(misc_base + 0x264)
+#define SPEAR1310_AMBA_CLK_SYNT			(misc_base + 0x268)
+#define SPEAR1310_CLCD_CLK_SYNT			(misc_base + 0x270)
+#define SPEAR1310_RAS_CLK_SYNT0			(misc_base + 0x280)
+#define SPEAR1310_RAS_CLK_SYNT1			(misc_base + 0x288)
+#define SPEAR1310_RAS_CLK_SYNT2			(misc_base + 0x290)
+#define SPEAR1310_RAS_CLK_SYNT3			(misc_base + 0x298)
 	/* Check Fractional synthesizer reg masks */
 
-#define SPEAR1310_PERIP1_CLK_ENB		(VA_MISC_BASE + 0x300)
+#define SPEAR1310_PERIP1_CLK_ENB		(misc_base + 0x300)
 	/* PERIP1_CLK_ENB register masks */
 	#define SPEAR1310_RTC_CLK_ENB			31
 	#define SPEAR1310_ADC_CLK_ENB			30
@@ -138,7 +136,7 @@
 	#define SPEAR1310_SYSROM_CLK_ENB		1
 	#define SPEAR1310_BUS_CLK_ENB			0
 
-#define SPEAR1310_PERIP2_CLK_ENB		(VA_MISC_BASE + 0x304)
+#define SPEAR1310_PERIP2_CLK_ENB		(misc_base + 0x304)
 	/* PERIP2_CLK_ENB register masks */
 	#define SPEAR1310_THSENS_CLK_ENB		8
 	#define SPEAR1310_I2S_REF_PAD_CLK_ENB		7
@@ -150,7 +148,7 @@
 	#define SPEAR1310_DDR_CORE_CLK_ENB		1
 	#define SPEAR1310_DDR_CTRL_CLK_ENB		0
 
-#define SPEAR1310_RAS_CLK_ENB			(VA_MISC_BASE + 0x310)
+#define SPEAR1310_RAS_CLK_ENB			(misc_base + 0x310)
 	/* RAS_CLK_ENB register masks */
 	#define SPEAR1310_SYNT3_CLK_ENB			17
 	#define SPEAR1310_SYNT2_CLK_ENB			16
@@ -172,7 +170,7 @@
 	#define SPEAR1310_ACLK_CLK_ENB			0
 
 /* RAS Area Control Register */
-#define SPEAR1310_RAS_CTRL_REG0			(VA_SPEAR1310_RAS_BASE + 0x000)
+#define SPEAR1310_RAS_CTRL_REG0			(ras_base + 0x000)
 	#define SPEAR1310_SSP1_CLK_MASK			3
 	#define SPEAR1310_SSP1_CLK_SHIFT		26
 	#define SPEAR1310_TDM_CLK_MASK			1
@@ -197,12 +195,12 @@
 	#define SPEAR1310_PCI_CLK_MASK			1
 	#define SPEAR1310_PCI_CLK_SHIFT			0
 
-#define SPEAR1310_RAS_CTRL_REG1			(VA_SPEAR1310_RAS_BASE + 0x004)
+#define SPEAR1310_RAS_CTRL_REG1			(ras_base + 0x004)
 	#define SPEAR1310_PHY_CLK_MASK			0x3
 	#define SPEAR1310_RMII_PHY_CLK_SHIFT		0
 	#define SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT	2
 
-#define SPEAR1310_RAS_SW_CLK_CTRL		(VA_SPEAR1310_RAS_BASE + 0x0148)
+#define SPEAR1310_RAS_SW_CLK_CTRL		(ras_base + 0x0148)
 	#define SPEAR1310_CAN1_CLK_ENB			25
 	#define SPEAR1310_CAN0_CLK_ENB			24
 	#define SPEAR1310_GPT64_CLK_ENB			23
@@ -385,7 +383,7 @@ static const char *ssp1_parents[] = { "ras_apb_clk", "gen_syn1_clk",
 static const char *pci_parents[] = { "ras_pll3_clk", "gen_syn2_clk", };
 static const char *tdm_parents[] = { "ras_pll3_clk", "gen_syn1_clk", };
 
-void __init spear1310_clk_init(void)
+void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base)
 {
 	struct clk *clk, *clk1;