diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-01-23 18:56:08 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-01-23 18:56:08 -0800 |
commit | 7e21774db5cc9cf8fe93a64a2f0c6cf47db8ab24 (patch) | |
tree | 460812792bc3b23789a83968b7bad840cc3eb047 /drivers/clk/sirf/clk-prima2.c | |
parent | 0ba3307a8ec35252f7b1e222e32889a6f3d9ceb3 (diff) | |
parent | 2e84d75116c17c2034e917b411250d2d11755435 (diff) | |
download | linux-7e21774db5cc9cf8fe93a64a2f0c6cf47db8ab24.tar.bz2 |
Merge tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux
Pull clk framework changes from Mike Turquette:
"The first half of the clk framework pull request is made up almost
entirely of new platform/driver support. There are some conversions
of existing drivers to the common-clock Device Tree binding, and a few
non-critical fixes to the framework.
Due to an entirely unnecessary cyclical dependency with the arm-soc
tree this pull request is broken into two pieces. The second piece
will be sent out after arm-soc sends you the pull request that merged
in core support for the HiSilicon 3620 platform. That same pull
request from arm-soc depends on this pull request to merge in those
HiSilicon bits without causing build failures"
[ Just did the ARM SoC merges, so getting ready for the second clk tree
pull request - Linus ]
* tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits)
devicetree: bindings: Document qcom,mmcc
devicetree: bindings: Document qcom,gcc
clk: qcom: Add support for MSM8660's global clock controller (GCC)
clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)
clk: qcom: Add support for MSM8974's global clock controller (GCC)
clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)
clk: qcom: Add support for MSM8960's global clock controller (GCC)
clk: qcom: Add reset controller support
clk: qcom: Add support for branches/gate clocks
clk: qcom: Add support for root clock generators (RCGs)
clk: qcom: Add support for phase locked loops (PLLs)
clk: qcom: Add a regmap type clock struct
clk: Add set_rate_and_parent() op
reset: Silence warning in reset-controller.h
clk: sirf: re-arch to make the codes support both prima2 and atlas6
clk: composite: pass mux_hw into determine_rate
clk: shmobile: Fix MSTP clock array initialization
clk: shmobile: Fix MSTP clock index
ARM: dts: Add clock provider specific properties to max77686 node
clk: max77686: Register OF clock provider
...
Diffstat (limited to 'drivers/clk/sirf/clk-prima2.c')
-rw-r--r-- | drivers/clk/sirf/clk-prima2.c | 151 |
1 files changed, 151 insertions, 0 deletions
diff --git a/drivers/clk/sirf/clk-prima2.c b/drivers/clk/sirf/clk-prima2.c new file mode 100644 index 000000000000..7adc5c70c7ff --- /dev/null +++ b/drivers/clk/sirf/clk-prima2.c @@ -0,0 +1,151 @@ +/* + * Clock tree for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include "prima2.h" +#include "clk-common.c" + +static struct clk_dmn clk_mmc01 = { + .regofs = SIRFSOC_CLKC_MMC_CFG, + .enable_bit = 59, + .hw = { + .init = &clk_mmc01_init, + }, +}; + +static struct clk_dmn clk_mmc23 = { + .regofs = SIRFSOC_CLKC_MMC_CFG, + .enable_bit = 60, + .hw = { + .init = &clk_mmc23_init, + }, +}; + +static struct clk_dmn clk_mmc45 = { + .regofs = SIRFSOC_CLKC_MMC_CFG, + .enable_bit = 61, + .hw = { + .init = &clk_mmc45_init, + }, +}; + +static struct clk_init_data clk_nand_init = { + .name = "nand", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_nand = { + .enable_bit = 34, + .hw = { + .init = &clk_nand_init, + }, +}; + +enum prima2_clk_index { + /* 0 1 2 3 4 5 6 7 8 9 */ + rtc, osc, pll1, pll2, pll3, mem, sys, security, dsp, gps, + mf, io, cpu, uart0, uart1, uart2, tsc, i2c0, i2c1, spi0, + spi1, pwmc, efuse, pulse, dmac0, dmac1, nand, audio, usp0, usp1, + usp2, vip, gfx, mm, lcd, vpp, mmc01, mmc23, mmc45, usbpll, + usb0, usb1, cphif, maxclk, +}; + +static __initdata struct clk_hw *prima2_clk_hw_array[maxclk] = { + NULL, /* dummy */ + NULL, + &clk_pll1.hw, + &clk_pll2.hw, + &clk_pll3.hw, + &clk_mem.hw, + &clk_sys.hw, + &clk_security.hw, + &clk_dsp.hw, + &clk_gps.hw, + &clk_mf.hw, + &clk_io.hw, + &clk_cpu.hw, + &clk_uart0.hw, + &clk_uart1.hw, + &clk_uart2.hw, + &clk_tsc.hw, + &clk_i2c0.hw, + &clk_i2c1.hw, + &clk_spi0.hw, + &clk_spi1.hw, + &clk_pwmc.hw, + &clk_efuse.hw, + &clk_pulse.hw, + &clk_dmac0.hw, + &clk_dmac1.hw, + &clk_nand.hw, + &clk_audio.hw, + &clk_usp0.hw, + &clk_usp1.hw, + &clk_usp2.hw, + &clk_vip.hw, + &clk_gfx.hw, + &clk_mm.hw, + &clk_lcd.hw, + &clk_vpp.hw, + &clk_mmc01.hw, + &clk_mmc23.hw, + &clk_mmc45.hw, + &usb_pll_clk_hw, + &clk_usb0.hw, + &clk_usb1.hw, + &clk_cphif.hw, +}; + +static struct clk *prima2_clks[maxclk]; + +static void __init prima2_clk_init(struct device_node *np) +{ + struct device_node *rscnp; + int i; + + rscnp = of_find_compatible_node(NULL, NULL, "sirf,prima2-rsc"); + sirfsoc_rsc_vbase = of_iomap(rscnp, 0); + if (!sirfsoc_rsc_vbase) + panic("unable to map rsc registers\n"); + of_node_put(rscnp); + + sirfsoc_clk_vbase = of_iomap(np, 0); + if (!sirfsoc_clk_vbase) + panic("unable to map clkc registers\n"); + + /* These are always available (RTC and 26MHz OSC)*/ + prima2_clks[rtc] = clk_register_fixed_rate(NULL, "rtc", NULL, + CLK_IS_ROOT, 32768); + prima2_clks[osc] = clk_register_fixed_rate(NULL, "osc", NULL, + CLK_IS_ROOT, 26000000); + + for (i = pll1; i < maxclk; i++) { + prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]); + BUG_ON(!prima2_clks[i]); + } + clk_register_clkdev(prima2_clks[cpu], NULL, "cpu"); + clk_register_clkdev(prima2_clks[io], NULL, "io"); + clk_register_clkdev(prima2_clks[mem], NULL, "mem"); + clk_register_clkdev(prima2_clks[mem], NULL, "osc"); + + clk_data.clks = prima2_clks; + clk_data.clk_num = maxclk; + + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} +CLK_OF_DECLARE(prima2_clk, "sirf,prima2-clkc", prima2_clk_init); |