diff options
author | Stephen Boyd <sboyd@codeaurora.org> | 2014-01-15 10:47:24 -0800 |
---|---|---|
committer | Mike Turquette <mturquette@linaro.org> | 2014-01-16 12:00:59 -0800 |
commit | 9e2631313c463c11645db046beb9bdecaf28b62f (patch) | |
tree | e5af54c695abf7a218b7af55c5fcc40bcf9076e3 /drivers/clk/qcom/clk-pll.h | |
parent | 085d7a455444f4d425371ee3c8a273c6e1b522db (diff) | |
download | linux-9e2631313c463c11645db046beb9bdecaf28b62f.tar.bz2 |
clk: qcom: Add support for phase locked loops (PLLs)
Add support for Qualcomm's PLLs (phase locked loops). This is
sufficient enough to be able to determine the rate the PLL is
running at. We can add rate setting support later when it's
needed.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Diffstat (limited to 'drivers/clk/qcom/clk-pll.h')
-rw-r--r-- | drivers/clk/qcom/clk-pll.h | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/drivers/clk/qcom/clk-pll.h b/drivers/clk/qcom/clk-pll.h new file mode 100644 index 000000000000..0775a99ca768 --- /dev/null +++ b/drivers/clk/qcom/clk-pll.h @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2013, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __QCOM_CLK_PLL_H__ +#define __QCOM_CLK_PLL_H__ + +#include <linux/clk-provider.h> +#include "clk-regmap.h" + +/** + * struct clk_pll - phase locked loop (PLL) + * @l_reg: L register + * @m_reg: M register + * @n_reg: N register + * @config_reg: config register + * @mode_reg: mode register + * @status_reg: status register + * @status_bit: ANDed with @status_reg to determine if PLL is enabled + * @hw: handle between common and hardware-specific interfaces + */ +struct clk_pll { + u32 l_reg; + u32 m_reg; + u32 n_reg; + u32 config_reg; + u32 mode_reg; + u32 status_reg; + u8 status_bit; + + struct clk_regmap clkr; +}; + +extern const struct clk_ops clk_pll_ops; +extern const struct clk_ops clk_pll_vote_ops; + +#define to_clk_pll(_hw) container_of(to_clk_regmap(_hw), struct clk_pll, clkr) + +struct pll_config { + u16 l; + u32 m; + u32 n; + u32 vco_val; + u32 vco_mask; + u32 pre_div_val; + u32 pre_div_mask; + u32 post_div_val; + u32 post_div_mask; + u32 mn_ena_mask; + u32 main_output_mask; + u32 aux_output_mask; +}; + +void clk_pll_configure_sr_hpm_lp(struct clk_pll *pll, struct regmap *regmap, + const struct pll_config *config, bool fsm_mode); + +#endif |