Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The large diff this time around is from the addition of a new clk
  driver for the TI Davinci family of SoCs. So far those clks have been
  supported with a custom implementation of the clk API in the arch port
  instead of in the CCF. With this driver merged we're one step closer
  to having a single clk API implementation.

  The other large diff is from the Amlogic clk driver that underwent
  some major surgery to use regmap. Beyond that, the biggest hitter is
  Samsung which needed some reworks to properly handle clk provider
  power domains and a bunch of PLL rate updates.

  The core framework was fairly quiet this round, just getting some
  cleanups and small fixes for some of the more esoteric features. And
  the usual set of driver non-critical fixes, cleanups, and minor
  additions are here as well.

  Core:
   - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
   - debugfs ops macroized to shave some lines of boilerplate code
   - Always calculate the phase instead of caching it in clk_get_phase()
   - More __must_check on bulk clk APIs

  New Drivers:
   - TI's Davinci family of SoCs
   - Intel's Stratix10 SoC
   - stm32mp157 SoC
   - Allwinner H6 CCU
   - Silicon Labs SI544 clock generator chip
   - Renesas R-Car M3-N and V3H SoCs
   - i.MX6SLL SoCs

  Removed Drivers:
   - ST-Ericsson AB8540/9540

  Updates:
   - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
   - STM32F469 DSI and STM32F769 sdmmc2 support
   - GPIO clks can sleep now
   - Spreadtrum SC9860 RTC clks
   - Nvidia Tegra MBIST workarounds and various minor fixes
   - Rockchip phase handling fixes and a memory leak plugged
   - Renesas drivers switch to readl/writel from clk_readl/clk_writel
   - Renesas gained CPU (Z/Z2) and watchdog support
   - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
   - Qualcomm PM8921 PMIC XO buffers
   - Amlogic migrates to regmap APIs
   - TI Keystone clk latching support
   - Allwinner H3 and H5 video clk fixes
   - Broadcom BCM2835 PLLs needed another bit to enable
   - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
   - i.MX6UL/ULL epdc_podf support
   - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits)
  clk: davinci: add a reset lookup table for psc0
  clk: imx: add clock driver for imx6sll
  dt-bindings: imx: update clock doc for imx6sll
  clk: imx: add new gate/gate2 wrapper funtion
  clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
  clk: cs2000: set pm_ops in hibernate-compatible way
  clk: bcm2835: De-assert/assert PLL reset signal when appropriate
  clk: imx7d: Move clks_init_on before any clock operations
  clk: imx7d: Correct ahb clk parent select
  clk: imx7d: Correct dram pll type
  clk: imx7d: Add USB clock information
  clk: socfpga: stratix10: add clock driver for Stratix10 platform
  dt-bindings: documentation: add clock bindings information for Stratix10
  clk: ti: fix flag space conflict with clkctrl clocks
  clk: uniphier: add additional ethernet clock lines for Pro4
  clk: uniphier: add SATA clock control support
  clk: uniphier: add PCIe clock control support
  clk: Add driver for the si544 clock generator chip
  clk: davinci: Remove redundant dev_err calls
  clk: uniphier: add ethernet clock control support for PXs3
  ...

1 files changed, 141 insertions, 0 deletions

diff --git a/drivers/clk/davinci/pll.h b/drivers/clk/davinci/pll.h
new file mode 100644
index 000000000000..b1b6fb23f972
--- /dev/null
+++ b/drivers/clk/davinci/pll.h
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Clock driver for TI Davinci PSC controllers
+ *
+ * Copyright (C) 2018 David Lechner <david@lechnology.com>
+ */
+
+#ifndef __CLK_DAVINCI_PLL_H___
+#define __CLK_DAVINCI_PLL_H___
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/types.h>
+
+#define PLL_HAS_CLKMODE			BIT(0) /* PLL has PLLCTL[CLKMODE] */
+#define PLL_HAS_PREDIV			BIT(1) /* has prediv before PLL */
+#define PLL_PREDIV_ALWAYS_ENABLED	BIT(2) /* don't clear DEN bit */
+#define PLL_PREDIV_FIXED_DIV		BIT(3) /* fixed divider value */
+#define PLL_HAS_POSTDIV			BIT(4) /* has postdiv after PLL */
+#define PLL_POSTDIV_ALWAYS_ENABLED	BIT(5) /* don't clear DEN bit */
+#define PLL_POSTDIV_FIXED_DIV		BIT(6) /* fixed divider value */
+#define PLL_HAS_EXTCLKSRC		BIT(7) /* has selectable bypass */
+#define PLL_PLLM_2X			BIT(8) /* PLLM value is 2x (DM365) */
+#define PLL_PREDIV_FIXED8		BIT(9) /* DM355 quirk */
+
+/** davinci_pll_clk_info - controller-specific PLL info
+ * @name: The name of the PLL
+ * @unlock_reg: Option CFGCHIP register for unlocking PLL
+ * @unlock_mask: Bitmask used with @unlock_reg
+ * @pllm_mask: Bitmask for PLLM[PLLM] value
+ * @pllm_min: Minimum allowable value for PLLM[PLLM]
+ * @pllm_max: Maximum allowable value for PLLM[PLLM]
+ * @pllout_min_rate: Minimum allowable rate for PLLOUT
+ * @pllout_max_rate: Maximum allowable rate for PLLOUT
+ * @flags: Bitmap of PLL_* flags.
+ */
+struct davinci_pll_clk_info {
+	const char *name;
+	u32 unlock_reg;
+	u32 unlock_mask;
+	u32 pllm_mask;
+	u32 pllm_min;
+	u32 pllm_max;
+	unsigned long pllout_min_rate;
+	unsigned long pllout_max_rate;
+	u32 flags;
+};
+
+#define SYSCLK_ARM_RATE		BIT(0) /* Controls ARM rate */
+#define SYSCLK_ALWAYS_ENABLED	BIT(1) /* Or bad things happen */
+#define SYSCLK_FIXED_DIV	BIT(2) /* Fixed divider */
+
+/** davinci_pll_sysclk_info - SYSCLKn-specific info
+ * @name: The name of the clock
+ * @parent_name: The name of the parent clock
+ * @id: "n" in "SYSCLKn"
+ * @ratio_width: Width (in bits) of RATIO in PLLDIVn register
+ * @flags: Bitmap of SYSCLK_* flags.
+ */
+struct davinci_pll_sysclk_info {
+	const char *name;
+	const char *parent_name;
+	u32 id;
+	u32 ratio_width;
+	u32 flags;
+};
+
+#define SYSCLK(i, n, p, w, f)				\
+static const struct davinci_pll_sysclk_info n = {	\
+	.name		= #n,				\
+	.parent_name	= #p,				\
+	.id		= (i),				\
+	.ratio_width	= (w),				\
+	.flags		= (f),				\
+}
+
+/** davinci_pll_obsclk_info - OBSCLK-specific info
+ * @name: The name of the clock
+ * @parent_names: Array of names of the parent clocks
+ * @num_parents: Length of @parent_names
+ * @table: Array of values to write to OCSEL[OCSRC] cooresponding to
+ *         @parent_names
+ * @ocsrc_mask: Bitmask for OCSEL[OCSRC]
+ */
+struct davinci_pll_obsclk_info {
+	const char *name;
+	const char * const *parent_names;
+	u8 num_parents;
+	u32 *table;
+	u32 ocsrc_mask;
+};
+
+struct clk *davinci_pll_clk_register(struct device *dev,
+				     const struct davinci_pll_clk_info *info,
+				     const char *parent_name,
+				     void __iomem *base);
+struct clk *davinci_pll_auxclk_register(struct device *dev,
+					const char *name,
+					void __iomem *base);
+struct clk *davinci_pll_sysclkbp_clk_register(struct device *dev,
+					      const char *name,
+					      void __iomem *base);
+struct clk *
+davinci_pll_obsclk_register(struct device *dev,
+			    const struct davinci_pll_obsclk_info *info,
+			    void __iomem *base);
+struct clk *
+davinci_pll_sysclk_register(struct device *dev,
+			    const struct davinci_pll_sysclk_info *info,
+			    void __iomem *base);
+
+int of_davinci_pll_init(struct device *dev,
+			const struct davinci_pll_clk_info *info,
+			const struct davinci_pll_obsclk_info *obsclk_info,
+			const struct davinci_pll_sysclk_info **div_info,
+			u8 max_sysclk_id,
+			void __iomem *base);
+
+/* Platform-specific callbacks */
+
+int da830_pll_init(struct device *dev, void __iomem *base);
+
+int da850_pll0_init(struct device *dev, void __iomem *base);
+int da850_pll1_init(struct device *dev, void __iomem *base);
+int of_da850_pll0_init(struct device *dev, void __iomem *base);
+int of_da850_pll1_init(struct device *dev, void __iomem *base);
+
+int dm355_pll1_init(struct device *dev, void __iomem *base);
+int dm355_pll2_init(struct device *dev, void __iomem *base);
+
+int dm365_pll1_init(struct device *dev, void __iomem *base);
+int dm365_pll2_init(struct device *dev, void __iomem *base);
+
+int dm644x_pll1_init(struct device *dev, void __iomem *base);
+int dm644x_pll2_init(struct device *dev, void __iomem *base);
+
+int dm646x_pll1_init(struct device *dev, void __iomem *base);
+int dm646x_pll2_init(struct device *dev, void __iomem *base);
+
+#endif /* __CLK_DAVINCI_PLL_H___ */