summaryrefslogtreecommitdiffstats
path: root/drivers/char
diff options
context:
space:
mode:
authorCorey Minyard <cminyard@mvista.com>2018-03-08 14:57:53 -0600
committerCorey Minyard <cminyard@mvista.com>2018-03-12 07:03:06 -0500
commit4876234acc5441e325f262eec48672ee7f4a0cc6 (patch)
tree2c30290ddef82aaa559497a3b0c370e368734a1b /drivers/char
parent4866b1dce0389013a268f0ab63f7229b30c6e5fe (diff)
downloadlinux-4876234acc5441e325f262eec48672ee7f4a0cc6.tar.bz2
ipmi: Remove ACPI SPMI probing from the system interface driver
The IPMI spec states: The purpose of the SPMI Table is to provide a mechanism that can be used by the OSPM (an ACPI term for “OS Operating System-directed configuration and Power Management” essentially meaning an ACPI-aware OS or OS loader) very early in the boot process, e.g., before the ability to execute ACPI control methods in the OS is available. When we are probing IPMI in Linux, ACPI control methods are available, so we shouldn't be probing using SPMI. It could cause some confusion during the probing process. Signed-off-by: Corey Minyard <cminyard@mvista.com>
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/ipmi/ipmi_si_platform.c154
1 files changed, 0 insertions, 154 deletions
diff --git a/drivers/char/ipmi/ipmi_si_platform.c b/drivers/char/ipmi/ipmi_si_platform.c
index 3d45bf1ee5bc..bf69927502bd 100644
--- a/drivers/char/ipmi/ipmi_si_platform.c
+++ b/drivers/char/ipmi/ipmi_si_platform.c
@@ -51,14 +51,6 @@ MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the"
#endif
#ifdef CONFIG_ACPI
-
-/*
- * Once we get an ACPI failure, we don't try any more, because we go
- * through the tables sequentially. Once we don't find a table, there
- * are no more.
- */
-static int acpi_failure;
-
/* For GPE-type interrupts. */
static u32 ipmi_acpi_gpe(acpi_handle gpe_device,
u32 gpe_number, void *context)
@@ -103,146 +95,6 @@ static int acpi_gpe_irq_setup(struct si_sm_io *io)
return 0;
}
}
-
-/*
- * Defined at
- * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
- */
-struct SPMITable {
- s8 Signature[4];
- u32 Length;
- u8 Revision;
- u8 Checksum;
- s8 OEMID[6];
- s8 OEMTableID[8];
- s8 OEMRevision[4];
- s8 CreatorID[4];
- s8 CreatorRevision[4];
- u8 InterfaceType;
- u8 IPMIlegacy;
- s16 SpecificationRevision;
-
- /*
- * Bit 0 - SCI interrupt supported
- * Bit 1 - I/O APIC/SAPIC
- */
- u8 InterruptType;
-
- /*
- * If bit 0 of InterruptType is set, then this is the SCI
- * interrupt in the GPEx_STS register.
- */
- u8 GPE;
-
- s16 Reserved;
-
- /*
- * If bit 1 of InterruptType is set, then this is the I/O
- * APIC/SAPIC interrupt.
- */
- u32 GlobalSystemInterrupt;
-
- /* The actual register address. */
- struct acpi_generic_address addr;
-
- u8 UID[4];
-
- s8 spmi_id[1]; /* A '\0' terminated array starts here. */
-};
-
-static int try_init_spmi(struct SPMITable *spmi)
-{
- struct si_sm_io io;
-
- if (spmi->IPMIlegacy != 1) {
- pr_info(PFX "Bad SPMI legacy %d\n", spmi->IPMIlegacy);
- return -ENODEV;
- }
-
- memset(&io, 0, sizeof(io));
- io.addr_source = SI_SPMI;
- pr_info(PFX "probing via SPMI\n");
-
- /* Figure out the interface type. */
- switch (spmi->InterfaceType) {
- case 1: /* KCS */
- io.si_type = SI_KCS;
- break;
- case 2: /* SMIC */
- io.si_type = SI_SMIC;
- break;
- case 3: /* BT */
- io.si_type = SI_BT;
- break;
- case 4: /* SSIF, just ignore */
- return -EIO;
- default:
- pr_info(PFX "Unknown ACPI/SPMI SI type %d\n",
- spmi->InterfaceType);
- return -EIO;
- }
-
- if (spmi->InterruptType & 1) {
- /* We've got a GPE interrupt. */
- io.irq = spmi->GPE;
- io.irq_setup = acpi_gpe_irq_setup;
- } else if (spmi->InterruptType & 2) {
- /* We've got an APIC/SAPIC interrupt. */
- io.irq = spmi->GlobalSystemInterrupt;
- io.irq_setup = ipmi_std_irq_setup;
- } else {
- /* Use the default interrupt setting. */
- io.irq = 0;
- io.irq_setup = NULL;
- }
-
- if (spmi->addr.bit_width) {
- /* A (hopefully) properly formed register bit width. */
- io.regspacing = spmi->addr.bit_width / 8;
- } else {
- io.regspacing = DEFAULT_REGSPACING;
- }
- io.regsize = io.regspacing;
- io.regshift = spmi->addr.bit_offset;
-
- if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
- io.addr_type = IPMI_MEM_ADDR_SPACE;
- } else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
- io.addr_type = IPMI_IO_ADDR_SPACE;
- } else {
- pr_warn(PFX "Unknown ACPI I/O Address type\n");
- return -EIO;
- }
- io.addr_data = spmi->addr.address;
-
- pr_info("ipmi_si: SPMI: %s %#lx regsize %d spacing %d irq %d\n",
- (io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
- io.addr_data, io.regsize, io.regspacing, io.irq);
-
- return ipmi_si_add_smi(&io);
-}
-
-static void spmi_find_bmc(void)
-{
- acpi_status status;
- struct SPMITable *spmi;
- int i;
-
- if (acpi_disabled)
- return;
-
- if (acpi_failure)
- return;
-
- for (i = 0; ; i++) {
- status = acpi_get_table(ACPI_SIG_SPMI, i+1,
- (struct acpi_table_header **)&spmi);
- if (status != AE_OK)
- return;
-
- try_init_spmi(spmi);
- }
-}
#endif
static struct resource *
@@ -580,12 +432,6 @@ void ipmi_si_platform_init(void)
int rv = platform_driver_register(&ipmi_platform_driver);
if (rv)
pr_err(PFX "Unable to register driver: %d\n", rv);
-
-#ifdef CONFIG_ACPI
- if (si_tryacpi)
- spmi_find_bmc();
-#endif
-
}
void ipmi_si_platform_shutdown(void)