ipmi:ssif: Add support for multi-part transmit messages > 2 parts

The spec was fairly confusing about how multi-part transmit messages
worked, so the original implementation only added support for two
part messages.  But after talking about it with others and finding
something I missed, I think it makes more sense.

The spec mentions smbus command 8 in a table at the end of the
section on SSIF support as the end transaction.  If that works,
then all is good and as it should be.  However, some implementations
seem to use a middle transaction <32 bytes tomark the end because of the
confusion in the spec, even though that is an SMBus violation if
the number of bytes is zero.

So this change adds some tests, if command=8 works, it uses that,
otherwise if an empty end transaction works, it uses a middle
transaction <32 bytes to mark the end.  If neither works, then
it limits the size to 63 bytes as it is now.

Cc: Harri Hakkarainen <harri@cavium.com>
Cc: Bazhenov, Dmitry <dmitry.bazhenov@auriga.com>
Cc: Mach, Dat <Dat.Mach@cavium.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

1 files changed, 159 insertions, 50 deletions

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index 764d305a264d..137b03892806 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -61,6 +61,7 @@
 #define	SSIF_IPMI_REQUEST			2
 #define	SSIF_IPMI_MULTI_PART_REQUEST_START	6
 #define	SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE	7
+#define	SSIF_IPMI_MULTI_PART_REQUEST_END	8
 #define	SSIF_IPMI_RESPONSE			3
 #define	SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE	9
 
@@ -272,6 +273,7 @@ struct ssif_info {
 	/* Info from SSIF cmd */
 	unsigned char max_xmit_msg_size;
 	unsigned char max_recv_msg_size;
+	bool cmd8_works; /* See test_multipart_messages() for details. */
 	unsigned int  multi_support;
 	int           supports_pec;
 
@@ -885,32 +887,33 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 		 * in the SSIF_MULTI_n_PART case in the probe function
 		 * for details on the intricacies of this.
 		 */
-		int left;
+		int left, to_write;
 		unsigned char *data_to_send;
+		unsigned char cmd;
 
 		ssif_inc_stat(ssif_info, sent_messages_parts);
 
 		left = ssif_info->multi_len - ssif_info->multi_pos;
-		if (left > 32)
-			left = 32;
+		to_write = left;
+		if (to_write > 32)
+			to_write = 32;
 		/* Length byte. */
-		ssif_info->multi_data[ssif_info->multi_pos] = left;
+		ssif_info->multi_data[ssif_info->multi_pos] = to_write;
 		data_to_send = ssif_info->multi_data + ssif_info->multi_pos;
-		ssif_info->multi_pos += left;
-		if (left < 32)
-			/*
-			 * Write is finished.  Note that we must end
-			 * with a write of less than 32 bytes to
-			 * complete the transaction, even if it is
-			 * zero bytes.
-			 */
+		ssif_info->multi_pos += to_write;
+		cmd = SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE;
+		if (ssif_info->cmd8_works) {
+			if (left == to_write) {
+				cmd = SSIF_IPMI_MULTI_PART_REQUEST_END;
+				ssif_info->multi_data = NULL;
+			}
+		} else if (to_write < 32) {
 			ssif_info->multi_data = NULL;
+		}
 
 		rv = ssif_i2c_send(ssif_info, msg_written_handler,
-				  I2C_SMBUS_WRITE,
-				  SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
-				  data_to_send,
-				  I2C_SMBUS_BLOCK_DATA);
+				   I2C_SMBUS_WRITE, cmd,
+				   data_to_send, I2C_SMBUS_BLOCK_DATA);
 		if (rv < 0) {
 			/* request failed, just return the error. */
 			ssif_inc_stat(ssif_info, send_errors);
@@ -1242,6 +1245,24 @@ static int ssif_remove(struct i2c_client *client)
 	return 0;
 }
 
+static int read_response(struct i2c_client *client, unsigned char *resp)
+{
+	int ret = -ENODEV, retry_cnt = SSIF_RECV_RETRIES;
+
+	while (retry_cnt > 0) {
+		ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE,
+						resp);
+		if (ret > 0)
+			break;
+		msleep(SSIF_MSG_MSEC);
+		retry_cnt--;
+		if (retry_cnt <= 0)
+			break;
+	}
+
+	return ret;
+}
+
 static int do_cmd(struct i2c_client *client, int len, unsigned char *msg,
 		  int *resp_len, unsigned char *resp)
 {
@@ -1258,26 +1279,16 @@ static int do_cmd(struct i2c_client *client, int len, unsigned char *msg,
 		return -ENODEV;
 	}
 
-	ret = -ENODEV;
-	retry_cnt = SSIF_RECV_RETRIES;
-	while (retry_cnt > 0) {
-		ret = i2c_smbus_read_block_data(client, SSIF_IPMI_RESPONSE,
-						resp);
-		if (ret > 0)
-			break;
-		msleep(SSIF_MSG_MSEC);
-		retry_cnt--;
-		if (retry_cnt <= 0)
-			break;
-	}
-
+	ret = read_response(client, resp);
 	if (ret > 0) {
 		/* Validate that the response is correct. */
 		if (ret < 3 ||
 		    (resp[0] != (msg[0] | (1 << 2))) ||
 		    (resp[1] != msg[1]))
 			ret = -EINVAL;
-		else {
+		else if (ret > IPMI_MAX_MSG_LENGTH) {
+			ret = -E2BIG;
+		} else {
 			*resp_len = ret;
 			ret = 0;
 		}
@@ -1389,6 +1400,121 @@ static int find_slave_address(struct i2c_client *client, int slave_addr)
 	return slave_addr;
 }
 
+static int start_multipart_test(struct i2c_client *client,
+				unsigned char *msg, bool do_middle)
+{
+	int retry_cnt = SSIF_SEND_RETRIES, ret;
+
+retry_write:
+	ret = i2c_smbus_write_block_data(client,
+					 SSIF_IPMI_MULTI_PART_REQUEST_START,
+					 32, msg);
+	if (ret) {
+		retry_cnt--;
+		if (retry_cnt > 0)
+			goto retry_write;
+		dev_err(&client->dev, "Could not write multi-part start, though the BMC said it could handle it.  Just limit sends to one part.\n");
+		return ret;
+	}
+
+	if (!do_middle)
+		return 0;
+
+	ret = i2c_smbus_write_block_data(client,
+					 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
+					 32, msg + 32);
+	if (ret) {
+		dev_err(&client->dev, "Could not write multi-part middle, though the BMC said it could handle it.  Just limit sends to one part.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void test_multipart_messages(struct i2c_client *client,
+				    struct ssif_info *ssif_info,
+				    unsigned char *resp)
+{
+	unsigned char msg[65];
+	int ret;
+	bool do_middle;
+
+	if (ssif_info->max_xmit_msg_size <= 32)
+		return;
+
+	do_middle = ssif_info->max_xmit_msg_size > 63;
+
+	memset(msg, 0, sizeof(msg));
+	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+	msg[1] = IPMI_GET_DEVICE_ID_CMD;
+
+	/*
+	 * The specification is all messed up dealing with sending
+	 * multi-part messages.  Per what the specification says, it
+	 * is impossible to send a message that is a multiple of 32
+	 * bytes, except for 32 itself.  It talks about a "start"
+	 * transaction (cmd=6) that must be 32 bytes, "middle"
+	 * transaction (cmd=7) that must be 32 bytes, and an "end"
+	 * transaction.  The "end" transaction is shown as cmd=7 in
+	 * the text, but if that's the case there is no way to
+	 * differentiate between a middle and end part except the
+	 * length being less than 32.  But there is a table at the far
+	 * end of the section (that I had never noticed until someone
+	 * pointed it out to me) that mentions it as cmd=8.
+	 *
+	 * After some thought, I think the example is wrong and the
+	 * end transaction should be cmd=8.  But some systems don't
+	 * implement cmd=8, they use a zero-length end transaction,
+	 * even though that violates the SMBus specification.
+	 *
+	 * So, to work around this, this code tests if cmd=8 works.
+	 * If it does, then we use that.  If not, it tests zero-
+	 * byte end transactions.  If that works, good.  If not,
+	 * we only allow 63-byte transactions max.
+	 */
+
+	ret = start_multipart_test(client, msg, do_middle);
+	if (ret)
+		goto out_no_multi_part;
+
+	ret = i2c_smbus_write_block_data(client,
+					 SSIF_IPMI_MULTI_PART_REQUEST_END,
+					 1, msg + 64);
+
+	if (!ret)
+		ret = read_response(client, resp);
+
+	if (ret > 0) {
+		/* End transactions work, we are good. */
+		ssif_info->cmd8_works = true;
+		return;
+	}
+
+	ret = start_multipart_test(client, msg, do_middle);
+	if (ret) {
+		dev_err(&client->dev, "Second multipart test failed.\n");
+		goto out_no_multi_part;
+	}
+
+	ret = i2c_smbus_write_block_data(client,
+					 SSIF_IPMI_MULTI_PART_REQUEST_MIDDLE,
+					 0, msg + 64);
+	if (!ret)
+		ret = read_response(client, resp);
+	if (ret > 0)
+		/* Zero-size end parts work, use those. */
+		return;
+
+	/* Limit to 63 bytes and use a short middle command to mark the end. */
+	if (ssif_info->max_xmit_msg_size > 63)
+		ssif_info->max_xmit_msg_size = 63;
+	return;
+
+out_no_multi_part:
+	ssif_info->max_xmit_msg_size = 32;
+	return;
+}
+
 /*
  * Global enables we care about.
  */
@@ -1475,26 +1601,7 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
 			break;
 
 		case SSIF_MULTI_n_PART:
-			/*
-			 * The specification is rather confusing at
-			 * this point, but I think I understand what
-			 * is meant.  At least I have a workable
-			 * solution.  With multi-part messages, you
-			 * cannot send a message that is a multiple of
-			 * 32-bytes in length, because the start and
-			 * middle messages are 32-bytes and the end
-			 * message must be at least one byte.  You
-			 * can't fudge on an extra byte, that would
-			 * screw up things like fru data writes.  So
-			 * we limit the length to 63 bytes.  That way
-			 * a 32-byte message gets sent as a single
-			 * part.  A larger message will be a 32-byte
-			 * start and the next message is always going
-			 * to be 1-31 bytes in length.  Not ideal, but
-			 * it should work.
-			 */
-			if (ssif_info->max_xmit_msg_size > 63)
-				ssif_info->max_xmit_msg_size = 63;
+			/* We take whatever size given, but do some testing. */
 			break;
 
 		default:
@@ -1513,6 +1620,8 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		ssif_info->supports_pec = 0;
 	}
 
+	test_multipart_messages(client, ssif_info, resp);
+
 	/* Make sure the NMI timeout is cleared. */
 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
 	msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;