diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/char/scc.h | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/char/scc.h')
-rw-r--r-- | drivers/char/scc.h | 613 |
1 files changed, 613 insertions, 0 deletions
diff --git a/drivers/char/scc.h b/drivers/char/scc.h new file mode 100644 index 000000000000..51810f72f1a9 --- /dev/null +++ b/drivers/char/scc.h @@ -0,0 +1,613 @@ +/* + * atari_SCC.h: Definitions for the Am8530 Serial Communications Controller + * + * Copyright 1994 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + */ + + +#ifndef _SCC_H +#define _SCC_H + +#include <linux/delay.h> + +/* Special configuration ioctls for the Atari SCC5380 Serial + * Communications Controller + */ + +/* ioctl command codes */ + +#define TIOCGATSCC 0x54c0 /* get SCC configuration */ +#define TIOCSATSCC 0x54c1 /* set SCC configuration */ +#define TIOCDATSCC 0x54c2 /* reset configuration to defaults */ + +/* Clock sources */ + +#define CLK_RTxC 0 +#define CLK_TRxC 1 +#define CLK_PCLK 2 + +/* baud_bases for the common clocks in the Atari. These are the real + * frequencies divided by 16. + */ + +#define SCC_BAUD_BASE_TIMC 19200 /* 0.3072 MHz from TT-MFP, Timer C */ +#define SCC_BAUD_BASE_BCLK 153600 /* 2.4576 MHz */ +#define SCC_BAUD_BASE_PCLK4 229500 /* 3.6720 MHz */ +#define SCC_BAUD_BASE_PCLK 503374 /* 8.0539763 MHz */ +#define SCC_BAUD_BASE_NONE 0 /* for not connected or unused + * clock sources */ + +/* The SCC clock configuration structure */ + +struct scc_clock_config { + unsigned RTxC_base; /* base_baud of RTxC */ + unsigned TRxC_base; /* base_baud of TRxC */ + unsigned PCLK_base; /* base_baud of PCLK, both channels! */ + struct { + unsigned clksrc; /* CLK_RTxC, CLK_TRxC or CLK_PCLK */ + unsigned divisor; /* divisor for base baud, valid values: + * see below */ + } baud_table[17]; /* For 50, 75, 110, 135, 150, 200, 300, + * 600, 1200, 1800, 2400, 4800, 9600, + * 19200, 38400, 57600 and 115200 bps. + * The last two could be replaced by + * other rates > 38400 if they're not + * possible. + */ +}; + +/* The following divisors are valid: + * + * - CLK_RTxC: 1 or even (1, 2 and 4 are the direct modes, > 4 use + * the BRG) + * + * - CLK_TRxC: 1, 2 or 4 (no BRG, only direct modes possible) + * + * - CLK_PCLK: >= 4 and even (no direct modes, only BRG) + * + */ + +struct scc_port { + struct gs_port gs; + volatile unsigned char *ctrlp; + volatile unsigned char *datap; + int x_char; /* xon/xoff character */ + int c_dcd; + int channel; + struct scc_port *port_a; /* Reference to port A and B */ + struct scc_port *port_b; /* structs for reg access */ +}; + +#define SCC_MAGIC 0x52696368 + +/***********************************************************************/ +/* */ +/* Register Names */ +/* */ +/***********************************************************************/ + +/* The SCC documentation gives no explicit names to the registers, + * they're just called WR0..15 and RR0..15. To make the source code + * better readable and make the transparent write reg read access (see + * below) possible, I christen them here with self-invented names. + * Note that (real) read registers are assigned numbers 16..31. WR7' + * has number 33. + */ + +#define COMMAND_REG 0 /* wo */ +#define INT_AND_DMA_REG 1 /* wo */ +#define INT_VECTOR_REG 2 /* rw, common to both channels */ +#define RX_CTRL_REG 3 /* rw */ +#define AUX1_CTRL_REG 4 /* rw */ +#define TX_CTRL_REG 5 /* rw */ +#define SYNC_ADR_REG 6 /* wo */ +#define SYNC_CHAR_REG 7 /* wo */ +#define SDLC_OPTION_REG 33 /* wo */ +#define TX_DATA_REG 8 /* wo */ +#define MASTER_INT_CTRL 9 /* wo, common to both channels */ +#define AUX2_CTRL_REG 10 /* rw */ +#define CLK_CTRL_REG 11 /* wo */ +#define TIMER_LOW_REG 12 /* rw */ +#define TIMER_HIGH_REG 13 /* rw */ +#define DPLL_CTRL_REG 14 /* wo */ +#define INT_CTRL_REG 15 /* rw */ + +#define STATUS_REG 16 /* ro */ +#define SPCOND_STATUS_REG 17 /* wo */ +/* RR2 is WR2 for Channel A, Channel B gives vector + current status: */ +#define CURR_VECTOR_REG 18 /* Ch. B only, Ch. A for rw */ +#define INT_PENDING_REG 19 /* Channel A only! */ +/* RR4 is WR4, if b6(MR7') == 1 */ +/* RR5 is WR5, if b6(MR7') == 1 */ +#define FS_FIFO_LOW_REG 22 /* ro */ +#define FS_FIFO_HIGH_REG 23 /* ro */ +#define RX_DATA_REG 24 /* ro */ +/* RR9 is WR3, if b6(MR7') == 1 */ +#define DPLL_STATUS_REG 26 /* ro */ +/* RR11 is WR10, if b6(MR7') == 1 */ +/* RR12 is WR12 */ +/* RR13 is WR13 */ +/* RR14 not present */ +/* RR15 is WR15 */ + + +/***********************************************************************/ +/* */ +/* Register Values */ +/* */ +/***********************************************************************/ + + +/* WR0: COMMAND_REG "CR" */ + +#define CR_RX_CRC_RESET 0x40 +#define CR_TX_CRC_RESET 0x80 +#define CR_TX_UNDERRUN_RESET 0xc0 + +#define CR_EXTSTAT_RESET 0x10 +#define CR_SEND_ABORT 0x18 +#define CR_ENAB_INT_NEXT_RX 0x20 +#define CR_TX_PENDING_RESET 0x28 +#define CR_ERROR_RESET 0x30 +#define CR_HIGHEST_IUS_RESET 0x38 + + +/* WR1: INT_AND_DMA_REG "IDR" */ + +#define IDR_EXTSTAT_INT_ENAB 0x01 +#define IDR_TX_INT_ENAB 0x02 +#define IDR_PARERR_AS_SPCOND 0x04 + +#define IDR_RX_INT_DISAB 0x00 +#define IDR_RX_INT_FIRST 0x08 +#define IDR_RX_INT_ALL 0x10 +#define IDR_RX_INT_SPCOND 0x18 +#define IDR_RX_INT_MASK 0x18 + +#define IDR_WAITREQ_RX 0x20 +#define IDR_WAITREQ_IS_REQ 0x40 +#define IDR_WAITREQ_ENAB 0x80 + + +/* WR3: RX_CTRL_REG "RCR" */ + +#define RCR_RX_ENAB 0x01 +#define RCR_DISCARD_SYNC_CHARS 0x02 +#define RCR_ADDR_SEARCH 0x04 +#define RCR_CRC_ENAB 0x08 +#define RCR_SEARCH_MODE 0x10 +#define RCR_AUTO_ENAB_MODE 0x20 + +#define RCR_CHSIZE_MASK 0xc0 +#define RCR_CHSIZE_5 0x00 +#define RCR_CHSIZE_6 0x40 +#define RCR_CHSIZE_7 0x80 +#define RCR_CHSIZE_8 0xc0 + + +/* WR4: AUX1_CTRL_REG "A1CR" */ + +#define A1CR_PARITY_MASK 0x03 +#define A1CR_PARITY_NONE 0x00 +#define A1CR_PARITY_ODD 0x01 +#define A1CR_PARITY_EVEN 0x03 + +#define A1CR_MODE_MASK 0x0c +#define A1CR_MODE_SYNCR 0x00 +#define A1CR_MODE_ASYNC_1 0x04 +#define A1CR_MODE_ASYNC_15 0x08 +#define A1CR_MODE_ASYNC_2 0x0c + +#define A1CR_SYNCR_MODE_MASK 0x30 +#define A1CR_SYNCR_MONOSYNC 0x00 +#define A1CR_SYNCR_BISYNC 0x10 +#define A1CR_SYNCR_SDLC 0x20 +#define A1CR_SYNCR_EXTCSYNC 0x30 + +#define A1CR_CLKMODE_MASK 0xc0 +#define A1CR_CLKMODE_x1 0x00 +#define A1CR_CLKMODE_x16 0x40 +#define A1CR_CLKMODE_x32 0x80 +#define A1CR_CLKMODE_x64 0xc0 + + +/* WR5: TX_CTRL_REG "TCR" */ + +#define TCR_TX_CRC_ENAB 0x01 +#define TCR_RTS 0x02 +#define TCR_USE_CRC_CCITT 0x00 +#define TCR_USE_CRC_16 0x04 +#define TCR_TX_ENAB 0x08 +#define TCR_SEND_BREAK 0x10 + +#define TCR_CHSIZE_MASK 0x60 +#define TCR_CHSIZE_5 0x00 +#define TCR_CHSIZE_6 0x20 +#define TCR_CHSIZE_7 0x40 +#define TCR_CHSIZE_8 0x60 + +#define TCR_DTR 0x80 + + +/* WR7': SLDC_OPTION_REG "SOR" */ + +#define SOR_AUTO_TX_ENAB 0x01 +#define SOR_AUTO_EOM_RESET 0x02 +#define SOR_AUTO_RTS_MODE 0x04 +#define SOR_NRZI_DISAB_HIGH 0x08 +#define SOR_ALT_DTRREQ_TIMING 0x10 +#define SOR_READ_CRC_CHARS 0x20 +#define SOR_EXTENDED_REG_ACCESS 0x40 + + +/* WR9: MASTER_INT_CTRL "MIC" */ + +#define MIC_VEC_INCL_STAT 0x01 +#define MIC_NO_VECTOR 0x02 +#define MIC_DISAB_LOWER_CHAIN 0x04 +#define MIC_MASTER_INT_ENAB 0x08 +#define MIC_STATUS_HIGH 0x10 +#define MIC_IGN_INTACK 0x20 + +#define MIC_NO_RESET 0x00 +#define MIC_CH_A_RESET 0x40 +#define MIC_CH_B_RESET 0x80 +#define MIC_HARD_RESET 0xc0 + + +/* WR10: AUX2_CTRL_REG "A2CR" */ + +#define A2CR_SYNC_6 0x01 +#define A2CR_LOOP_MODE 0x02 +#define A2CR_ABORT_ON_UNDERRUN 0x04 +#define A2CR_MARK_IDLE 0x08 +#define A2CR_GO_ACTIVE_ON_POLL 0x10 + +#define A2CR_CODING_MASK 0x60 +#define A2CR_CODING_NRZ 0x00 +#define A2CR_CODING_NRZI 0x20 +#define A2CR_CODING_FM1 0x40 +#define A2CR_CODING_FM0 0x60 + +#define A2CR_PRESET_CRC_1 0x80 + + +/* WR11: CLK_CTRL_REG "CCR" */ + +#define CCR_TRxCOUT_MASK 0x03 +#define CCR_TRxCOUT_XTAL 0x00 +#define CCR_TRxCOUT_TXCLK 0x01 +#define CCR_TRxCOUT_BRG 0x02 +#define CCR_TRxCOUT_DPLL 0x03 + +#define CCR_TRxC_OUTPUT 0x04 + +#define CCR_TXCLK_MASK 0x18 +#define CCR_TXCLK_RTxC 0x00 +#define CCR_TXCLK_TRxC 0x08 +#define CCR_TXCLK_BRG 0x10 +#define CCR_TXCLK_DPLL 0x18 + +#define CCR_RXCLK_MASK 0x60 +#define CCR_RXCLK_RTxC 0x00 +#define CCR_RXCLK_TRxC 0x20 +#define CCR_RXCLK_BRG 0x40 +#define CCR_RXCLK_DPLL 0x60 + +#define CCR_RTxC_XTAL 0x80 + + +/* WR14: DPLL_CTRL_REG "DCR" */ + +#define DCR_BRG_ENAB 0x01 +#define DCR_BRG_USE_PCLK 0x02 +#define DCR_DTRREQ_IS_REQ 0x04 +#define DCR_AUTO_ECHO 0x08 +#define DCR_LOCAL_LOOPBACK 0x10 + +#define DCR_DPLL_EDGE_SEARCH 0x20 +#define DCR_DPLL_ERR_RESET 0x40 +#define DCR_DPLL_DISAB 0x60 +#define DCR_DPLL_CLK_BRG 0x80 +#define DCR_DPLL_CLK_RTxC 0xa0 +#define DCR_DPLL_FM 0xc0 +#define DCR_DPLL_NRZI 0xe0 + + +/* WR15: INT_CTRL_REG "ICR" */ + +#define ICR_OPTIONREG_SELECT 0x01 +#define ICR_ENAB_BRG_ZERO_INT 0x02 +#define ICR_USE_FS_FIFO 0x04 +#define ICR_ENAB_DCD_INT 0x08 +#define ICR_ENAB_SYNC_INT 0x10 +#define ICR_ENAB_CTS_INT 0x20 +#define ICR_ENAB_UNDERRUN_INT 0x40 +#define ICR_ENAB_BREAK_INT 0x80 + + +/* RR0: STATUS_REG "SR" */ + +#define SR_CHAR_AVAIL 0x01 +#define SR_BRG_ZERO 0x02 +#define SR_TX_BUF_EMPTY 0x04 +#define SR_DCD 0x08 +#define SR_SYNC_ABORT 0x10 +#define SR_CTS 0x20 +#define SR_TX_UNDERRUN 0x40 +#define SR_BREAK 0x80 + + +/* RR1: SPCOND_STATUS_REG "SCSR" */ + +#define SCSR_ALL_SENT 0x01 +#define SCSR_RESIDUAL_MASK 0x0e +#define SCSR_PARITY_ERR 0x10 +#define SCSR_RX_OVERRUN 0x20 +#define SCSR_CRC_FRAME_ERR 0x40 +#define SCSR_END_OF_FRAME 0x80 + + +/* RR3: INT_PENDING_REG "IPR" */ + +#define IPR_B_EXTSTAT 0x01 +#define IPR_B_TX 0x02 +#define IPR_B_RX 0x04 +#define IPR_A_EXTSTAT 0x08 +#define IPR_A_TX 0x10 +#define IPR_A_RX 0x20 + + +/* RR7: FS_FIFO_HIGH_REG "FFHR" */ + +#define FFHR_CNT_MASK 0x3f +#define FFHR_IS_FROM_FIFO 0x40 +#define FFHR_FIFO_OVERRUN 0x80 + + +/* RR10: DPLL_STATUS_REG "DSR" */ + +#define DSR_ON_LOOP 0x02 +#define DSR_ON_LOOP_SENDING 0x10 +#define DSR_TWO_CLK_MISSING 0x40 +#define DSR_ONE_CLK_MISSING 0x80 + +/***********************************************************************/ +/* */ +/* Register Access */ +/* */ +/***********************************************************************/ + + +/* The SCC needs 3.5 PCLK cycles recovery time between to register + * accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 * + * 125 ns = 437.5 ns. This is too short for udelay(). + * 10/16/95: A tstb mfp.par_dt_reg takes 600ns (sure?) and thus should be + * quite right + */ + +#define scc_reg_delay() \ + do { \ + if (MACH_IS_MVME16x || MACH_IS_BVME6000 || MACH_IS_MVME147) \ + __asm__ __volatile__ ( " nop; nop"); \ + else if (MACH_IS_ATARI) \ + __asm__ __volatile__ ( "tstb %0" : : "g" (*_scc_del) : "cc" );\ + } while (0) + +extern unsigned char scc_shadow[2][16]; + +/* The following functions should relax the somehow complicated + * register access of the SCC. _SCCwrite() stores all written values + * (except for WR0 and WR8) in shadow registers for later recall. This + * removes the burden of remembering written values as needed. The + * extra work of storing the value doesn't count, since a delay is + * needed after a SCC access anyway. Additionally, _SCCwrite() manages + * writes to WR0 and WR8 differently, because these can be accessed + * directly with less overhead. Another special case are WR7 and WR7'. + * _SCCwrite automatically checks what of this registers is selected + * and changes b0 of WR15 if needed. + * + * _SCCread() for standard read registers is straightforward, except + * for RR2 (split into two "virtual" registers: one for the value + * written to WR2 (from the shadow) and one for the vector including + * status from RR2, Ch. B) and RR3. The latter must be read from + * Channel A, because it reads as all zeros on Ch. B. RR0 and RR8 can + * be accessed directly as before. + * + * The two inline function contain complicated switch statements. But + * I rely on regno and final_delay being constants, so gcc can reduce + * the whole stuff to just some assembler statements. + * + * _SCCwrite and _SCCread aren't intended to be used directly under + * normal circumstances. The macros SCCread[_ND] and SCCwrite[_ND] are + * for that purpose. They assume that a local variable 'port' is + * declared and pointing to the port's scc_struct entry. The + * variants with "_NB" appended should be used if no other SCC + * accesses follow immediately (within 0.5 usecs). They just skip the + * final delay nops. + * + * Please note that accesses to SCC registers should only take place + * when interrupts are turned off (at least if SCC interrupts are + * enabled). Otherwise, an interrupt could interfere with the + * two-stage accessing process. + * + */ + + +static __inline__ void _SCCwrite( + struct scc_port *port, + unsigned char *shadow, + volatile unsigned char *_scc_del, + int regno, + unsigned char val, int final_delay ) +{ + switch( regno ) { + + case COMMAND_REG: + /* WR0 can be written directly without pointing */ + *port->ctrlp = val; + break; + + case SYNC_CHAR_REG: + /* For WR7, first set b0 of WR15 to 0, if needed */ + if (shadow[INT_CTRL_REG] & ICR_OPTIONREG_SELECT) { + *port->ctrlp = 15; + shadow[INT_CTRL_REG] &= ~ICR_OPTIONREG_SELECT; + scc_reg_delay(); + *port->ctrlp = shadow[INT_CTRL_REG]; + scc_reg_delay(); + } + goto normal_case; + + case SDLC_OPTION_REG: + /* For WR7', first set b0 of WR15 to 1, if needed */ + if (!(shadow[INT_CTRL_REG] & ICR_OPTIONREG_SELECT)) { + *port->ctrlp = 15; + shadow[INT_CTRL_REG] |= ICR_OPTIONREG_SELECT; + scc_reg_delay(); + *port->ctrlp = shadow[INT_CTRL_REG]; + scc_reg_delay(); + } + *port->ctrlp = 7; + shadow[8] = val; /* WR7' shadowed at WR8 */ + scc_reg_delay(); + *port->ctrlp = val; + break; + + case TX_DATA_REG: /* WR8 */ + /* TX_DATA_REG can be accessed directly on some h/w */ + if (MACH_IS_MVME16x || MACH_IS_BVME6000 || MACH_IS_MVME147) + { + *port->ctrlp = regno; + scc_reg_delay(); + *port->ctrlp = val; + } + else + *port->datap = val; + break; + + case MASTER_INT_CTRL: + *port->ctrlp = regno; + val &= 0x3f; /* bits 6..7 are the reset commands */ + scc_shadow[0][regno] = val; + scc_reg_delay(); + *port->ctrlp = val; + break; + + case DPLL_CTRL_REG: + *port->ctrlp = regno; + val &= 0x1f; /* bits 5..7 are the DPLL commands */ + shadow[regno] = val; + scc_reg_delay(); + *port->ctrlp = val; + break; + + case 1 ... 6: + case 10 ... 13: + case 15: + normal_case: + *port->ctrlp = regno; + shadow[regno] = val; + scc_reg_delay(); + *port->ctrlp = val; + break; + + default: + printk( "Bad SCC write access to WR%d\n", regno ); + break; + + } + + if (final_delay) + scc_reg_delay(); +} + + +static __inline__ unsigned char _SCCread( + struct scc_port *port, + unsigned char *shadow, + volatile unsigned char *_scc_del, + int regno, int final_delay ) +{ + unsigned char rv; + + switch( regno ) { + + /* --- real read registers --- */ + case STATUS_REG: + rv = *port->ctrlp; + break; + + case INT_PENDING_REG: + /* RR3: read only from Channel A! */ + port = port->port_a; + goto normal_case; + + case RX_DATA_REG: + /* RR8 can be accessed directly on some h/w */ + if (MACH_IS_MVME16x || MACH_IS_BVME6000 || MACH_IS_MVME147) + { + *port->ctrlp = 8; + scc_reg_delay(); + rv = *port->ctrlp; + } + else + rv = *port->datap; + break; + + case CURR_VECTOR_REG: + /* RR2 (vector including status) from Ch. B */ + port = port->port_b; + goto normal_case; + + /* --- reading write registers: access the shadow --- */ + case 1 ... 7: + case 10 ... 15: + return shadow[regno]; /* no final delay! */ + + /* WR7' is special, because it is shadowed at the place of WR8 */ + case SDLC_OPTION_REG: + return shadow[8]; /* no final delay! */ + + /* WR9 is special too, because it is common for both channels */ + case MASTER_INT_CTRL: + return scc_shadow[0][9]; /* no final delay! */ + + default: + printk( "Bad SCC read access to %cR%d\n", (regno & 16) ? 'R' : 'W', + regno & ~16 ); + break; + + case SPCOND_STATUS_REG: + case FS_FIFO_LOW_REG: + case FS_FIFO_HIGH_REG: + case DPLL_STATUS_REG: + normal_case: + *port->ctrlp = regno & 0x0f; + scc_reg_delay(); + rv = *port->ctrlp; + break; + + } + + if (final_delay) + scc_reg_delay(); + return rv; +} + +#define SCC_ACCESS_INIT(port) \ + unsigned char *_scc_shadow = &scc_shadow[port->channel][0] + +#define SCCwrite(reg,val) _SCCwrite(port,_scc_shadow,scc_del,(reg),(val),1) +#define SCCwrite_NB(reg,val) _SCCwrite(port,_scc_shadow,scc_del,(reg),(val),0) +#define SCCread(reg) _SCCread(port,_scc_shadow,scc_del,(reg),1) +#define SCCread_NB(reg) _SCCread(port,_scc_shadow,scc_del,(reg),0) + +#define SCCmod(reg,and,or) SCCwrite((reg),(SCCread(reg)&(and))|(or)) + +#endif /* _SCC_H */ |