tty: move a number of tty drivers from drivers/char/ to drivers/tty/

As planned by Arnd Bergmann, this moves the following drivers from
drivers/char/ to drivers/tty/ as that's where they really belong:
	amiserial
	nozomi
	synclink
	rocket
	cyclades
	moxa
	mxser
	isicom
	bfin_jtag_comm

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 1214 deletions

diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h
deleted file mode 100644
index 67e0f1e778a2..000000000000
--- a/drivers/char/rocket_int.h
+++ /dev/null
@@ -1,1214 +0,0 @@
-/*
- * rocket_int.h --- internal header file for rocket.c
- *
- * Written by Theodore Ts'o, Copyright 1997.
- * Copyright 1997 Comtrol Corporation.  
- * 
- */
-
-/*
- * Definition of the types in rcktpt_type
- */
-#define ROCKET_TYPE_NORMAL	0
-#define ROCKET_TYPE_MODEM	1
-#define ROCKET_TYPE_MODEMII	2
-#define ROCKET_TYPE_MODEMIII	3
-#define ROCKET_TYPE_PC104       4
-
-#include <linux/mutex.h>
-
-#include <asm/io.h>
-#include <asm/byteorder.h>
-
-typedef unsigned char Byte_t;
-typedef unsigned int ByteIO_t;
-
-typedef unsigned int Word_t;
-typedef unsigned int WordIO_t;
-
-typedef unsigned int DWordIO_t;
-
-/*
- * Note!  Normally the Linux I/O macros already take care of
- * byte-swapping the I/O instructions.  However, all accesses using
- * sOutDW aren't really 32-bit accesses, but should be handled in byte
- * order.  Hence the use of the cpu_to_le32() macro to byte-swap
- * things to no-op the byte swapping done by the big-endian outl()
- * instruction.
- */
-
-static inline void sOutB(unsigned short port, unsigned char value)
-{
-#ifdef ROCKET_DEBUG_IO
-	printk(KERN_DEBUG "sOutB(%x, %x)...\n", port, value);
-#endif
-	outb_p(value, port);
-}
-
-static inline void sOutW(unsigned short port, unsigned short value)
-{
-#ifdef ROCKET_DEBUG_IO
-	printk(KERN_DEBUG "sOutW(%x, %x)...\n", port, value);
-#endif
-	outw_p(value, port);
-}
-
-static inline void out32(unsigned short port, Byte_t *p)
-{
-	u32 value = get_unaligned_le32(p);
-#ifdef ROCKET_DEBUG_IO
-	printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value);
-#endif
-	outl_p(value, port);
-}
-
-static inline unsigned char sInB(unsigned short port)
-{
-	return inb_p(port);
-}
-
-static inline unsigned short sInW(unsigned short port)
-{
-	return inw_p(port);
-}
-
-/* This is used to move arrays of bytes so byte swapping isn't appropriate. */
-#define sOutStrW(port, addr, count) if (count) outsw(port, addr, count)
-#define sInStrW(port, addr, count) if (count) insw(port, addr, count)
-
-#define CTL_SIZE 8
-#define AIOP_CTL_SIZE 4
-#define CHAN_AIOP_SIZE 8
-#define MAX_PORTS_PER_AIOP 8
-#define MAX_AIOPS_PER_BOARD 4
-#define MAX_PORTS_PER_BOARD 32
-
-/* Bus type ID */
-#define	isISA	0
-#define	isPCI	1
-#define	isMC	2
-
-/* Controller ID numbers */
-#define CTLID_NULL  -1		/* no controller exists */
-#define CTLID_0001  0x0001	/* controller release 1 */
-
-/* AIOP ID numbers, identifies AIOP type implementing channel */
-#define AIOPID_NULL -1		/* no AIOP or channel exists */
-#define AIOPID_0001 0x0001	/* AIOP release 1 */
-
-/************************************************************************
- Global Register Offsets - Direct Access - Fixed values
-************************************************************************/
-
-#define _CMD_REG   0x38		/* Command Register            8    Write */
-#define _INT_CHAN  0x39		/* Interrupt Channel Register  8    Read */
-#define _INT_MASK  0x3A		/* Interrupt Mask Register     8    Read / Write */
-#define _UNUSED    0x3B		/* Unused                      8 */
-#define _INDX_ADDR 0x3C		/* Index Register Address      16   Write */
-#define _INDX_DATA 0x3E		/* Index Register Data         8/16 Read / Write */
-
-/************************************************************************
- Channel Register Offsets for 1st channel in AIOP - Direct Access
-************************************************************************/
-#define _TD0       0x00		/* Transmit Data               16   Write */
-#define _RD0       0x00		/* Receive Data                16   Read */
-#define _CHN_STAT0 0x20		/* Channel Status              8/16 Read / Write */
-#define _FIFO_CNT0 0x10		/* Transmit/Receive FIFO Count 16   Read */
-#define _INT_ID0   0x30		/* Interrupt Identification    8    Read */
-
-/************************************************************************
- Tx Control Register Offsets - Indexed - External - Fixed
-************************************************************************/
-#define _TX_ENBLS  0x980	/* Tx Processor Enables Register 8 Read / Write */
-#define _TXCMP1    0x988	/* Transmit Compare Value #1     8 Read / Write */
-#define _TXCMP2    0x989	/* Transmit Compare Value #2     8 Read / Write */
-#define _TXREP1B1  0x98A	/* Tx Replace Value #1 - Byte 1  8 Read / Write */
-#define _TXREP1B2  0x98B	/* Tx Replace Value #1 - Byte 2  8 Read / Write */
-#define _TXREP2    0x98C	/* Transmit Replace Value #2     8 Read / Write */
-
-/************************************************************************
-Memory Controller Register Offsets - Indexed - External - Fixed
-************************************************************************/
-#define _RX_FIFO    0x000	/* Rx FIFO */
-#define _TX_FIFO    0x800	/* Tx FIFO */
-#define _RXF_OUTP   0x990	/* Rx FIFO OUT pointer        16 Read / Write */
-#define _RXF_INP    0x992	/* Rx FIFO IN pointer         16 Read / Write */
-#define _TXF_OUTP   0x994	/* Tx FIFO OUT pointer        8  Read / Write */
-#define _TXF_INP    0x995	/* Tx FIFO IN pointer         8  Read / Write */
-#define _TXP_CNT    0x996	/* Tx Priority Count          8  Read / Write */
-#define _TXP_PNTR   0x997	/* Tx Priority Pointer        8  Read / Write */
-
-#define PRI_PEND    0x80	/* Priority data pending (bit7, Tx pri cnt) */
-#define TXFIFO_SIZE 255		/* size of Tx FIFO */
-#define RXFIFO_SIZE 1023	/* size of Rx FIFO */
-
-/************************************************************************
-Tx Priority Buffer - Indexed - External - Fixed
-************************************************************************/
-#define _TXP_BUF    0x9C0	/* Tx Priority Buffer  32  Bytes   Read / Write */
-#define TXP_SIZE    0x20	/* 32 bytes */
-
-/************************************************************************
-Channel Register Offsets - Indexed - Internal - Fixed
-************************************************************************/
-
-#define _TX_CTRL    0xFF0	/* Transmit Control               16  Write */
-#define _RX_CTRL    0xFF2	/* Receive Control                 8  Write */
-#define _BAUD       0xFF4	/* Baud Rate                      16  Write */
-#define _CLK_PRE    0xFF6	/* Clock Prescaler                 8  Write */
-
-#define STMBREAK   0x08		/* BREAK */
-#define STMFRAME   0x04		/* framing error */
-#define STMRCVROVR 0x02		/* receiver over run error */
-#define STMPARITY  0x01		/* parity error */
-#define STMERROR   (STMBREAK | STMFRAME | STMPARITY)
-#define STMBREAKH   0x800	/* BREAK */
-#define STMFRAMEH   0x400	/* framing error */
-#define STMRCVROVRH 0x200	/* receiver over run error */
-#define STMPARITYH  0x100	/* parity error */
-#define STMERRORH   (STMBREAKH | STMFRAMEH | STMPARITYH)
-
-#define CTS_ACT   0x20		/* CTS input asserted */
-#define DSR_ACT   0x10		/* DSR input asserted */
-#define CD_ACT    0x08		/* CD input asserted */
-#define TXFIFOMT  0x04		/* Tx FIFO is empty */
-#define TXSHRMT   0x02		/* Tx shift register is empty */
-#define RDA       0x01		/* Rx data available */
-#define DRAINED (TXFIFOMT | TXSHRMT)	/* indicates Tx is drained */
-
-#define STATMODE  0x8000	/* status mode enable bit */
-#define RXFOVERFL 0x2000	/* receive FIFO overflow */
-#define RX2MATCH  0x1000	/* receive compare byte 2 match */
-#define RX1MATCH  0x0800	/* receive compare byte 1 match */
-#define RXBREAK   0x0400	/* received BREAK */
-#define RXFRAME   0x0200	/* received framing error */
-#define RXPARITY  0x0100	/* received parity error */
-#define STATERROR (RXBREAK | RXFRAME | RXPARITY)
-
-#define CTSFC_EN  0x80		/* CTS flow control enable bit */
-#define RTSTOG_EN 0x40		/* RTS toggle enable bit */
-#define TXINT_EN  0x10		/* transmit interrupt enable */
-#define STOP2     0x08		/* enable 2 stop bits (0 = 1 stop) */
-#define PARITY_EN 0x04		/* enable parity (0 = no parity) */
-#define EVEN_PAR  0x02		/* even parity (0 = odd parity) */
-#define DATA8BIT  0x01		/* 8 bit data (0 = 7 bit data) */
-
-#define SETBREAK  0x10		/* send break condition (must clear) */
-#define LOCALLOOP 0x08		/* local loopback set for test */
-#define SET_DTR   0x04		/* assert DTR */
-#define SET_RTS   0x02		/* assert RTS */
-#define TX_ENABLE 0x01		/* enable transmitter */
-
-#define RTSFC_EN  0x40		/* RTS flow control enable */
-#define RXPROC_EN 0x20		/* receive processor enable */
-#define TRIG_NO   0x00		/* Rx FIFO trigger level 0 (no trigger) */
-#define TRIG_1    0x08		/* trigger level 1 char */
-#define TRIG_1_2  0x10		/* trigger level 1/2 */
-#define TRIG_7_8  0x18		/* trigger level 7/8 */
-#define TRIG_MASK 0x18		/* trigger level mask */
-#define SRCINT_EN 0x04		/* special Rx condition interrupt enable */
-#define RXINT_EN  0x02		/* Rx interrupt enable */
-#define MCINT_EN  0x01		/* modem change interrupt enable */
-
-#define RXF_TRIG  0x20		/* Rx FIFO trigger level interrupt */
-#define TXFIFO_MT 0x10		/* Tx FIFO empty interrupt */
-#define SRC_INT   0x08		/* special receive condition interrupt */
-#define DELTA_CD  0x04		/* CD change interrupt */
-#define DELTA_CTS 0x02		/* CTS change interrupt */
-#define DELTA_DSR 0x01		/* DSR change interrupt */
-
-#define REP1W2_EN 0x10		/* replace byte 1 with 2 bytes enable */
-#define IGN2_EN   0x08		/* ignore byte 2 enable */
-#define IGN1_EN   0x04		/* ignore byte 1 enable */
-#define COMP2_EN  0x02		/* compare byte 2 enable */
-#define COMP1_EN  0x01		/* compare byte 1 enable */
-
-#define RESET_ALL 0x80		/* reset AIOP (all channels) */
-#define TXOVERIDE 0x40		/* Transmit software off override */
-#define RESETUART 0x20		/* reset channel's UART */
-#define RESTXFCNT 0x10		/* reset channel's Tx FIFO count register */
-#define RESRXFCNT 0x08		/* reset channel's Rx FIFO count register */
-
-#define INTSTAT0  0x01		/* AIOP 0 interrupt status */
-#define INTSTAT1  0x02		/* AIOP 1 interrupt status */
-#define INTSTAT2  0x04		/* AIOP 2 interrupt status */
-#define INTSTAT3  0x08		/* AIOP 3 interrupt status */
-
-#define INTR_EN   0x08		/* allow interrupts to host */
-#define INT_STROB 0x04		/* strobe and clear interrupt line (EOI) */
-
-/**************************************************************************
- MUDBAC remapped for PCI
-**************************************************************************/
-
-#define _CFG_INT_PCI  0x40
-#define _PCI_INT_FUNC 0x3A
-
-#define PCI_STROB 0x2000	/* bit 13 of int aiop register */
-#define INTR_EN_PCI   0x0010	/* allow interrupts to host */
-
-/*
- * Definitions for Universal PCI board registers
- */
-#define _PCI_9030_INT_CTRL	0x4c          /* Offsets from BAR1 */
-#define _PCI_9030_GPIO_CTRL	0x54
-#define PCI_INT_CTRL_AIOP	0x0001
-#define PCI_GPIO_CTRL_8PORT	0x4000
-#define _PCI_9030_RING_IND	0xc0          /* Offsets from BAR1 */
-
-#define CHAN3_EN  0x08		/* enable AIOP 3 */
-#define CHAN2_EN  0x04		/* enable AIOP 2 */
-#define CHAN1_EN  0x02		/* enable AIOP 1 */
-#define CHAN0_EN  0x01		/* enable AIOP 0 */
-#define FREQ_DIS  0x00
-#define FREQ_274HZ 0x60
-#define FREQ_137HZ 0x50
-#define FREQ_69HZ  0x40
-#define FREQ_34HZ  0x30
-#define FREQ_17HZ  0x20
-#define FREQ_9HZ   0x10
-#define PERIODIC_ONLY 0x80	/* only PERIODIC interrupt */
-
-#define CHANINT_EN 0x0100	/* flags to enable/disable channel ints */
-
-#define RDATASIZE 72
-#define RREGDATASIZE 52
-
-/*
- * AIOP interrupt bits for ISA/PCI boards and UPCI boards.
- */
-#define AIOP_INTR_BIT_0		0x0001
-#define AIOP_INTR_BIT_1		0x0002
-#define AIOP_INTR_BIT_2		0x0004
-#define AIOP_INTR_BIT_3		0x0008
-
-#define AIOP_INTR_BITS ( \
-	AIOP_INTR_BIT_0 \
-	| AIOP_INTR_BIT_1 \
-	| AIOP_INTR_BIT_2 \
-	| AIOP_INTR_BIT_3)
-
-#define UPCI_AIOP_INTR_BIT_0	0x0004
-#define UPCI_AIOP_INTR_BIT_1	0x0020
-#define UPCI_AIOP_INTR_BIT_2	0x0100
-#define UPCI_AIOP_INTR_BIT_3	0x0800
-
-#define UPCI_AIOP_INTR_BITS ( \
-	UPCI_AIOP_INTR_BIT_0 \
-	| UPCI_AIOP_INTR_BIT_1 \
-	| UPCI_AIOP_INTR_BIT_2 \
-	| UPCI_AIOP_INTR_BIT_3)
-
-/* Controller level information structure */
-typedef struct {
-	int CtlID;
-	int CtlNum;
-	int BusType;
-	int boardType;
-	int isUPCI;
-	WordIO_t PCIIO;
-	WordIO_t PCIIO2;
-	ByteIO_t MBaseIO;
-	ByteIO_t MReg1IO;
-	ByteIO_t MReg2IO;
-	ByteIO_t MReg3IO;
-	Byte_t MReg2;
-	Byte_t MReg3;
-	int NumAiop;
-	int AltChanRingIndicator;
-	ByteIO_t UPCIRingInd;
-	WordIO_t AiopIO[AIOP_CTL_SIZE];
-	ByteIO_t AiopIntChanIO[AIOP_CTL_SIZE];
-	int AiopID[AIOP_CTL_SIZE];
-	int AiopNumChan[AIOP_CTL_SIZE];
-	Word_t *AiopIntrBits;
-} CONTROLLER_T;
-
-typedef CONTROLLER_T CONTROLLER_t;
-
-/* Channel level information structure */
-typedef struct {
-	CONTROLLER_T *CtlP;
-	int AiopNum;
-	int ChanID;
-	int ChanNum;
-	int rtsToggle;
-
-	ByteIO_t Cmd;
-	ByteIO_t IntChan;
-	ByteIO_t IntMask;
-	DWordIO_t IndexAddr;
-	WordIO_t IndexData;
-
-	WordIO_t TxRxData;
-	WordIO_t ChanStat;
-	WordIO_t TxRxCount;
-	ByteIO_t IntID;
-
-	Word_t TxFIFO;
-	Word_t TxFIFOPtrs;
-	Word_t RxFIFO;
-	Word_t RxFIFOPtrs;
-	Word_t TxPrioCnt;
-	Word_t TxPrioPtr;
-	Word_t TxPrioBuf;
-
-	Byte_t R[RREGDATASIZE];
-
-	Byte_t BaudDiv[4];
-	Byte_t TxControl[4];
-	Byte_t RxControl[4];
-	Byte_t TxEnables[4];
-	Byte_t TxCompare[4];
-	Byte_t TxReplace1[4];
-	Byte_t TxReplace2[4];
-} CHANNEL_T;
-
-typedef CHANNEL_T CHANNEL_t;
-typedef CHANNEL_T *CHANPTR_T;
-
-#define InterfaceModeRS232  0x00
-#define InterfaceModeRS422  0x08
-#define InterfaceModeRS485  0x10
-#define InterfaceModeRS232T 0x18
-
-/***************************************************************************
-Function: sClrBreak
-Purpose:  Stop sending a transmit BREAK signal
-Call:     sClrBreak(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sClrBreak(ChP) \
-do { \
-   (ChP)->TxControl[3] &= ~SETBREAK; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sClrDTR
-Purpose:  Clr the DTR output
-Call:     sClrDTR(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sClrDTR(ChP) \
-do { \
-   (ChP)->TxControl[3] &= ~SET_DTR; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sClrRTS
-Purpose:  Clr the RTS output
-Call:     sClrRTS(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sClrRTS(ChP) \
-do { \
-   if ((ChP)->rtsToggle) break; \
-   (ChP)->TxControl[3] &= ~SET_RTS; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sClrTxXOFF
-Purpose:  Clear any existing transmit software flow control off condition
-Call:     sClrTxXOFF(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sClrTxXOFF(ChP) \
-do { \
-   sOutB((ChP)->Cmd,TXOVERIDE | (Byte_t)(ChP)->ChanNum); \
-   sOutB((ChP)->Cmd,(Byte_t)(ChP)->ChanNum); \
-} while (0)
-
-/***************************************************************************
-Function: sCtlNumToCtlPtr
-Purpose:  Convert a controller number to controller structure pointer
-Call:     sCtlNumToCtlPtr(CtlNum)
-          int CtlNum; Controller number
-Return:   CONTROLLER_T *: Ptr to controller structure
-*/
-#define sCtlNumToCtlPtr(CTLNUM) &sController[CTLNUM]
-
-/***************************************************************************
-Function: sControllerEOI
-Purpose:  Strobe the MUDBAC's End Of Interrupt bit.
-Call:     sControllerEOI(CtlP)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-*/
-#define sControllerEOI(CTLP) sOutB((CTLP)->MReg2IO,(CTLP)->MReg2 | INT_STROB)
-
-/***************************************************************************
-Function: sPCIControllerEOI
-Purpose:  Strobe the PCI End Of Interrupt bit.
-          For the UPCI boards, toggle the AIOP interrupt enable bit
-	  (this was taken from the Windows driver).
-Call:     sPCIControllerEOI(CtlP)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-*/
-#define sPCIControllerEOI(CTLP) \
-do { \
-    if ((CTLP)->isUPCI) { \
-	Word_t w = sInW((CTLP)->PCIIO); \
-	sOutW((CTLP)->PCIIO, (w ^ PCI_INT_CTRL_AIOP)); \
-	sOutW((CTLP)->PCIIO, w); \
-    } \
-    else { \
-	sOutW((CTLP)->PCIIO, PCI_STROB); \
-    } \
-} while (0)
-
-/***************************************************************************
-Function: sDisAiop
-Purpose:  Disable I/O access to an AIOP
-Call:     sDisAiop(CltP)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-          int AiopNum; Number of AIOP on controller
-*/
-#define sDisAiop(CTLP,AIOPNUM) \
-do { \
-   (CTLP)->MReg3 &= sBitMapClrTbl[AIOPNUM]; \
-   sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \
-} while (0)
-
-/***************************************************************************
-Function: sDisCTSFlowCtl
-Purpose:  Disable output flow control using CTS
-Call:     sDisCTSFlowCtl(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisCTSFlowCtl(ChP) \
-do { \
-   (ChP)->TxControl[2] &= ~CTSFC_EN; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sDisIXANY
-Purpose:  Disable IXANY Software Flow Control
-Call:     sDisIXANY(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisIXANY(ChP) \
-do { \
-   (ChP)->R[0x0e] = 0x86; \
-   out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \
-} while (0)
-
-/***************************************************************************
-Function: DisParity
-Purpose:  Disable parity
-Call:     sDisParity(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Comments: Function sSetParity() can be used in place of functions sEnParity(),
-          sDisParity(), sSetOddParity(), and sSetEvenParity().
-*/
-#define sDisParity(ChP) \
-do { \
-   (ChP)->TxControl[2] &= ~PARITY_EN; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sDisRTSToggle
-Purpose:  Disable RTS toggle
-Call:     sDisRTSToggle(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisRTSToggle(ChP) \
-do { \
-   (ChP)->TxControl[2] &= ~RTSTOG_EN; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-   (ChP)->rtsToggle = 0; \
-} while (0)
-
-/***************************************************************************
-Function: sDisRxFIFO
-Purpose:  Disable Rx FIFO
-Call:     sDisRxFIFO(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisRxFIFO(ChP) \
-do { \
-   (ChP)->R[0x32] = 0x0a; \
-   out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \
-} while (0)
-
-/***************************************************************************
-Function: sDisRxStatusMode
-Purpose:  Disable the Rx status mode
-Call:     sDisRxStatusMode(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Comments: This takes the channel out of the receive status mode.  All
-          subsequent reads of receive data using sReadRxWord() will return
-          two data bytes.
-*/
-#define sDisRxStatusMode(ChP) sOutW((ChP)->ChanStat,0)
-
-/***************************************************************************
-Function: sDisTransmit
-Purpose:  Disable transmit
-Call:     sDisTransmit(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-          This disables movement of Tx data from the Tx FIFO into the 1 byte
-          Tx buffer.  Therefore there could be up to a 2 byte latency
-          between the time sDisTransmit() is called and the transmit buffer
-          and transmit shift register going completely empty.
-*/
-#define sDisTransmit(ChP) \
-do { \
-   (ChP)->TxControl[3] &= ~TX_ENABLE; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sDisTxSoftFlowCtl
-Purpose:  Disable Tx Software Flow Control
-Call:     sDisTxSoftFlowCtl(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisTxSoftFlowCtl(ChP) \
-do { \
-   (ChP)->R[0x06] = 0x8a; \
-   out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
-} while (0)
-
-/***************************************************************************
-Function: sEnAiop
-Purpose:  Enable I/O access to an AIOP
-Call:     sEnAiop(CltP)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-          int AiopNum; Number of AIOP on controller
-*/
-#define sEnAiop(CTLP,AIOPNUM) \
-do { \
-   (CTLP)->MReg3 |= sBitMapSetTbl[AIOPNUM]; \
-   sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \
-} while (0)
-
-/***************************************************************************
-Function: sEnCTSFlowCtl
-Purpose:  Enable output flow control using CTS
-Call:     sEnCTSFlowCtl(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnCTSFlowCtl(ChP) \
-do { \
-   (ChP)->TxControl[2] |= CTSFC_EN; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sEnIXANY
-Purpose:  Enable IXANY Software Flow Control
-Call:     sEnIXANY(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnIXANY(ChP) \
-do { \
-   (ChP)->R[0x0e] = 0x21; \
-   out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \
-} while (0)
-
-/***************************************************************************
-Function: EnParity
-Purpose:  Enable parity
-Call:     sEnParity(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Comments: Function sSetParity() can be used in place of functions sEnParity(),
-          sDisParity(), sSetOddParity(), and sSetEvenParity().
-
-Warnings: Before enabling parity odd or even parity should be chosen using
-          functions sSetOddParity() or sSetEvenParity().
-*/
-#define sEnParity(ChP) \
-do { \
-   (ChP)->TxControl[2] |= PARITY_EN; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sEnRTSToggle
-Purpose:  Enable RTS toggle
-Call:     sEnRTSToggle(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Comments: This function will disable RTS flow control and clear the RTS
-          line to allow operation of RTS toggle.
-*/
-#define sEnRTSToggle(ChP) \
-do { \
-   (ChP)->RxControl[2] &= ~RTSFC_EN; \
-   out32((ChP)->IndexAddr,(ChP)->RxControl); \
-   (ChP)->TxControl[2] |= RTSTOG_EN; \
-   (ChP)->TxControl[3] &= ~SET_RTS; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-   (ChP)->rtsToggle = 1; \
-} while (0)
-
-/***************************************************************************
-Function: sEnRxFIFO
-Purpose:  Enable Rx FIFO
-Call:     sEnRxFIFO(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnRxFIFO(ChP) \
-do { \
-   (ChP)->R[0x32] = 0x08; \
-   out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \
-} while (0)
-
-/***************************************************************************
-Function: sEnRxProcessor
-Purpose:  Enable the receive processor
-Call:     sEnRxProcessor(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Comments: This function is used to start the receive processor.  When
-          the channel is in the reset state the receive processor is not
-          running.  This is done to prevent the receive processor from
-          executing invalid microcode instructions prior to the
-          downloading of the microcode.
-
-Warnings: This function must be called after valid microcode has been
-          downloaded to the AIOP, and it must not be called before the
-          microcode has been downloaded.
-*/
-#define sEnRxProcessor(ChP) \
-do { \
-   (ChP)->RxControl[2] |= RXPROC_EN; \
-   out32((ChP)->IndexAddr,(ChP)->RxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sEnRxStatusMode
-Purpose:  Enable the Rx status mode
-Call:     sEnRxStatusMode(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Comments: This places the channel in the receive status mode.  All subsequent
-          reads of receive data using sReadRxWord() will return a data byte
-          in the low word and a status byte in the high word.
-
-*/
-#define sEnRxStatusMode(ChP) sOutW((ChP)->ChanStat,STATMODE)
-
-/***************************************************************************
-Function: sEnTransmit
-Purpose:  Enable transmit
-Call:     sEnTransmit(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnTransmit(ChP) \
-do { \
-   (ChP)->TxControl[3] |= TX_ENABLE; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sEnTxSoftFlowCtl
-Purpose:  Enable Tx Software Flow Control
-Call:     sEnTxSoftFlowCtl(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnTxSoftFlowCtl(ChP) \
-do { \
-   (ChP)->R[0x06] = 0xc5; \
-   out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
-} while (0)
-
-/***************************************************************************
-Function: sGetAiopIntStatus
-Purpose:  Get the AIOP interrupt status
-Call:     sGetAiopIntStatus(CtlP,AiopNum)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-          int AiopNum; AIOP number
-Return:   Byte_t: The AIOP interrupt status.  Bits 0 through 7
-                         represent channels 0 through 7 respectively.  If a
-                         bit is set that channel is interrupting.
-*/
-#define sGetAiopIntStatus(CTLP,AIOPNUM) sInB((CTLP)->AiopIntChanIO[AIOPNUM])
-
-/***************************************************************************
-Function: sGetAiopNumChan
-Purpose:  Get the number of channels supported by an AIOP
-Call:     sGetAiopNumChan(CtlP,AiopNum)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-          int AiopNum; AIOP number
-Return:   int: The number of channels supported by the AIOP
-*/
-#define sGetAiopNumChan(CTLP,AIOPNUM) (CTLP)->AiopNumChan[AIOPNUM]
-
-/***************************************************************************
-Function: sGetChanIntID
-Purpose:  Get a channel's interrupt identification byte
-Call:     sGetChanIntID(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Return:   Byte_t: The channel interrupt ID.  Can be any
-             combination of the following flags:
-                RXF_TRIG:     Rx FIFO trigger level interrupt
-                TXFIFO_MT:    Tx FIFO empty interrupt
-                SRC_INT:      Special receive condition interrupt
-                DELTA_CD:     CD change interrupt
-                DELTA_CTS:    CTS change interrupt
-                DELTA_DSR:    DSR change interrupt
-*/
-#define sGetChanIntID(ChP) (sInB((ChP)->IntID) & (RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR))
-
-/***************************************************************************
-Function: sGetChanNum
-Purpose:  Get the number of a channel within an AIOP
-Call:     sGetChanNum(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Return:   int: Channel number within AIOP, or NULLCHAN if channel does
-               not exist.
-*/
-#define sGetChanNum(ChP) (ChP)->ChanNum
-
-/***************************************************************************
-Function: sGetChanStatus
-Purpose:  Get the channel status
-Call:     sGetChanStatus(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Return:   Word_t: The channel status.  Can be any combination of
-             the following flags:
-                LOW BYTE FLAGS
-                CTS_ACT:      CTS input asserted
-                DSR_ACT:      DSR input asserted
-                CD_ACT:       CD input asserted
-                TXFIFOMT:     Tx FIFO is empty
-                TXSHRMT:      Tx shift register is empty
-                RDA:          Rx data available
-
-                HIGH BYTE FLAGS
-                STATMODE:     status mode enable bit
-                RXFOVERFL:    receive FIFO overflow
-                RX2MATCH:     receive compare byte 2 match
-                RX1MATCH:     receive compare byte 1 match
-                RXBREAK:      received BREAK
-                RXFRAME:      received framing error
-                RXPARITY:     received parity error
-Warnings: This function will clear the high byte flags in the Channel
-          Status Register.
-*/
-#define sGetChanStatus(ChP) sInW((ChP)->ChanStat)
-
-/***************************************************************************
-Function: sGetChanStatusLo
-Purpose:  Get the low byte only of the channel status
-Call:     sGetChanStatusLo(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Return:   Byte_t: The channel status low byte.  Can be any combination
-             of the following flags:
-                CTS_ACT:      CTS input asserted
-                DSR_ACT:      DSR input asserted
-                CD_ACT:       CD input asserted
-                TXFIFOMT:     Tx FIFO is empty
-                TXSHRMT:      Tx shift register is empty
-                RDA:          Rx data available
-*/
-#define sGetChanStatusLo(ChP) sInB((ByteIO_t)(ChP)->ChanStat)
-
-/**********************************************************************
- * Get RI status of channel
- * Defined as a function in rocket.c   -aes
- */
-#if 0
-#define sGetChanRI(ChP) ((ChP)->CtlP->AltChanRingIndicator ? \
-                          (sInB((ByteIO_t)((ChP)->ChanStat+8)) & DSR_ACT) : \
-                            (((ChP)->CtlP->boardType == ROCKET_TYPE_PC104) ? \
-                               (!(sInB((ChP)->CtlP->AiopIO[3]) & sBitMapSetTbl[(ChP)->ChanNum])) : \
-                             0))
-#endif
-
-/***************************************************************************
-Function: sGetControllerIntStatus
-Purpose:  Get the controller interrupt status
-Call:     sGetControllerIntStatus(CtlP)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-Return:   Byte_t: The controller interrupt status in the lower 4
-                         bits.  Bits 0 through 3 represent AIOP's 0
-                         through 3 respectively.  If a bit is set that
-                         AIOP is interrupting.  Bits 4 through 7 will
-                         always be cleared.
-*/
-#define sGetControllerIntStatus(CTLP) (sInB((CTLP)->MReg1IO) & 0x0f)
-
-/***************************************************************************
-Function: sPCIGetControllerIntStatus
-Purpose:  Get the controller interrupt status
-Call:     sPCIGetControllerIntStatus(CtlP)
-          CONTROLLER_T *CtlP; Ptr to controller structure
-Return:   unsigned char: The controller interrupt status in the lower 4
-                         bits and bit 4.  Bits 0 through 3 represent AIOP's 0
-                         through 3 respectively. Bit 4 is set if the int 
-			 was generated from periodic. If a bit is set the
-			 AIOP is interrupting.
-*/
-#define sPCIGetControllerIntStatus(CTLP) \
-	((CTLP)->isUPCI ? \
-	  (sInW((CTLP)->PCIIO2) & UPCI_AIOP_INTR_BITS) : \
-	  ((sInW((CTLP)->PCIIO) >> 8) & AIOP_INTR_BITS))
-
-/***************************************************************************
-
-Function: sGetRxCnt
-Purpose:  Get the number of data bytes in the Rx FIFO
-Call:     sGetRxCnt(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Return:   int: The number of data bytes in the Rx FIFO.
-Comments: Byte read of count register is required to obtain Rx count.
-
-*/
-#define sGetRxCnt(ChP) sInW((ChP)->TxRxCount)
-
-/***************************************************************************
-Function: sGetTxCnt
-Purpose:  Get the number of data bytes in the Tx FIFO
-Call:     sGetTxCnt(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Return:   Byte_t: The number of data bytes in the Tx FIFO.
-Comments: Byte read of count register is required to obtain Tx count.
-
-*/
-#define sGetTxCnt(ChP) sInB((ByteIO_t)(ChP)->TxRxCount)
-
-/*****************************************************************************
-Function: sGetTxRxDataIO
-Purpose:  Get the I/O address of a channel's TxRx Data register
-Call:     sGetTxRxDataIO(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Return:   WordIO_t: I/O address of a channel's TxRx Data register
-*/
-#define sGetTxRxDataIO(ChP) (ChP)->TxRxData
-
-/***************************************************************************
-Function: sInitChanDefaults
-Purpose:  Initialize a channel structure to it's default state.
-Call:     sInitChanDefaults(ChP)
-          CHANNEL_T *ChP; Ptr to the channel structure
-Comments: This function must be called once for every channel structure
-          that exists before any other SSCI calls can be made.
-
-*/
-#define sInitChanDefaults(ChP) \
-do { \
-   (ChP)->CtlP = NULLCTLPTR; \
-   (ChP)->AiopNum = NULLAIOP; \
-   (ChP)->ChanID = AIOPID_NULL; \
-   (ChP)->ChanNum = NULLCHAN; \
-} while (0)
-
-/***************************************************************************
-Function: sResetAiopByNum
-Purpose:  Reset the AIOP by number
-Call:     sResetAiopByNum(CTLP,AIOPNUM)
-	CONTROLLER_T CTLP; Ptr to controller structure
-	AIOPNUM; AIOP index 
-*/
-#define sResetAiopByNum(CTLP,AIOPNUM) \
-do { \
-   sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,RESET_ALL); \
-   sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,0x0); \
-} while (0)
-
-/***************************************************************************
-Function: sSendBreak
-Purpose:  Send a transmit BREAK signal
-Call:     sSendBreak(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSendBreak(ChP) \
-do { \
-   (ChP)->TxControl[3] |= SETBREAK; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetBaud
-Purpose:  Set baud rate
-Call:     sSetBaud(ChP,Divisor)
-          CHANNEL_T *ChP; Ptr to channel structure
-          Word_t Divisor; 16 bit baud rate divisor for channel
-*/
-#define sSetBaud(ChP,DIVISOR) \
-do { \
-   (ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \
-   (ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \
-   out32((ChP)->IndexAddr,(ChP)->BaudDiv); \
-} while (0)
-
-/***************************************************************************
-Function: sSetData7
-Purpose:  Set data bits to 7
-Call:     sSetData7(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetData7(ChP) \
-do { \
-   (ChP)->TxControl[2] &= ~DATA8BIT; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetData8
-Purpose:  Set data bits to 8
-Call:     sSetData8(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetData8(ChP) \
-do { \
-   (ChP)->TxControl[2] |= DATA8BIT; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetDTR
-Purpose:  Set the DTR output
-Call:     sSetDTR(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetDTR(ChP) \
-do { \
-   (ChP)->TxControl[3] |= SET_DTR; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetEvenParity
-Purpose:  Set even parity
-Call:     sSetEvenParity(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Comments: Function sSetParity() can be used in place of functions sEnParity(),
-          sDisParity(), sSetOddParity(), and sSetEvenParity().
-
-Warnings: This function has no effect unless parity is enabled with function
-          sEnParity().
-*/
-#define sSetEvenParity(ChP) \
-do { \
-   (ChP)->TxControl[2] |= EVEN_PAR; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetOddParity
-Purpose:  Set odd parity
-Call:     sSetOddParity(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Comments: Function sSetParity() can be used in place of functions sEnParity(),
-          sDisParity(), sSetOddParity(), and sSetEvenParity().
-
-Warnings: This function has no effect unless parity is enabled with function
-          sEnParity().
-*/
-#define sSetOddParity(ChP) \
-do { \
-   (ChP)->TxControl[2] &= ~EVEN_PAR; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetRTS
-Purpose:  Set the RTS output
-Call:     sSetRTS(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetRTS(ChP) \
-do { \
-   if ((ChP)->rtsToggle) break; \
-   (ChP)->TxControl[3] |= SET_RTS; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetRxTrigger
-Purpose:  Set the Rx FIFO trigger level
-Call:     sSetRxProcessor(ChP,Level)
-          CHANNEL_T *ChP; Ptr to channel structure
-          Byte_t Level; Number of characters in Rx FIFO at which the
-             interrupt will be generated.  Can be any of the following flags:
-
-             TRIG_NO:   no trigger
-             TRIG_1:    1 character in FIFO
-             TRIG_1_2:  FIFO 1/2 full
-             TRIG_7_8:  FIFO 7/8 full
-Comments: An interrupt will be generated when the trigger level is reached
-          only if function sEnInterrupt() has been called with flag
-          RXINT_EN set.  The RXF_TRIG flag in the Interrupt Idenfification
-          register will be set whenever the trigger level is reached
-          regardless of the setting of RXINT_EN.
-
-*/
-#define sSetRxTrigger(ChP,LEVEL) \
-do { \
-   (ChP)->RxControl[2] &= ~TRIG_MASK; \
-   (ChP)->RxControl[2] |= LEVEL; \
-   out32((ChP)->IndexAddr,(ChP)->RxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetStop1
-Purpose:  Set stop bits to 1
-Call:     sSetStop1(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetStop1(ChP) \
-do { \
-   (ChP)->TxControl[2] &= ~STOP2; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetStop2
-Purpose:  Set stop bits to 2
-Call:     sSetStop2(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetStop2(ChP) \
-do { \
-   (ChP)->TxControl[2] |= STOP2; \
-   out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetTxXOFFChar
-Purpose:  Set the Tx XOFF flow control character
-Call:     sSetTxXOFFChar(ChP,Ch)
-          CHANNEL_T *ChP; Ptr to channel structure
-          Byte_t Ch; The value to set the Tx XOFF character to
-*/
-#define sSetTxXOFFChar(ChP,CH) \
-do { \
-   (ChP)->R[0x07] = (CH); \
-   out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
-} while (0)
-
-/***************************************************************************
-Function: sSetTxXONChar
-Purpose:  Set the Tx XON flow control character
-Call:     sSetTxXONChar(ChP,Ch)
-          CHANNEL_T *ChP; Ptr to channel structure
-          Byte_t Ch; The value to set the Tx XON character to
-*/
-#define sSetTxXONChar(ChP,CH) \
-do { \
-   (ChP)->R[0x0b] = (CH); \
-   out32((ChP)->IndexAddr,&(ChP)->R[0x08]); \
-} while (0)
-
-/***************************************************************************
-Function: sStartRxProcessor
-Purpose:  Start a channel's receive processor
-Call:     sStartRxProcessor(ChP)
-          CHANNEL_T *ChP; Ptr to channel structure
-Comments: This function is used to start a Rx processor after it was
-          stopped with sStopRxProcessor() or sStopSWInFlowCtl().  It
-          will restart both the Rx processor and software input flow control.
-
-*/
-#define sStartRxProcessor(ChP) out32((ChP)->IndexAddr,&(ChP)->R[0])
-
-/***************************************************************************
-Function: sWriteTxByte
-Purpose:  Write a transmit data byte to a channel.
-          ByteIO_t io: Channel transmit register I/O address.  This can
-                           be obtained with sGetTxRxDataIO().
-          Byte_t Data; The transmit data byte.
-Warnings: This function writes the data byte without checking to see if
-          sMaxTxSize is exceeded in the Tx FIFO.
-*/
-#define sWriteTxByte(IO,DATA) sOutB(IO,DATA)
-
-/*
- * Begin Linux specific definitions for the Rocketport driver
- *
- * This code is Copyright Theodore Ts'o, 1995-1997
- */
-
-struct r_port {
-	int magic;
-	struct tty_port port;
-	int line;
-	int flags;		/* Don't yet match the ASY_ flags!! */
-	unsigned int board:3;
-	unsigned int aiop:2;
-	unsigned int chan:3;
-	CONTROLLER_t *ctlp;
-	CHANNEL_t channel;
-	int intmask;
-	int xmit_fifo_room;	/* room in xmit fifo */
-	unsigned char *xmit_buf;
-	int xmit_head;
-	int xmit_tail;
-	int xmit_cnt;
-	int cd_status;
-	int ignore_status_mask;
-	int read_status_mask;
-	int cps;
-
-	struct completion close_wait;	/* Not yet matching the core */
-	spinlock_t slock;
-	struct mutex write_mtx;
-};
-
-#define RPORT_MAGIC 0x525001
-
-#define NUM_BOARDS 8
-#define MAX_RP_PORTS (32*NUM_BOARDS)
-
-/*
- * The size of the xmit buffer is 1 page, or 4096 bytes
- */
-#define XMIT_BUF_SIZE 4096
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/*
- * Assigned major numbers for the Comtrol Rocketport
- */
-#define TTY_ROCKET_MAJOR	46
-#define CUA_ROCKET_MAJOR	47
-
-#ifdef PCI_VENDOR_ID_RP
-#undef PCI_VENDOR_ID_RP
-#undef PCI_DEVICE_ID_RP8OCTA
-#undef PCI_DEVICE_ID_RP8INTF
-#undef PCI_DEVICE_ID_RP16INTF
-#undef PCI_DEVICE_ID_RP32INTF
-#undef PCI_DEVICE_ID_URP8OCTA
-#undef PCI_DEVICE_ID_URP8INTF
-#undef PCI_DEVICE_ID_URP16INTF
-#undef PCI_DEVICE_ID_CRP16INTF
-#undef PCI_DEVICE_ID_URP32INTF
-#endif
-
-/*  Comtrol PCI Vendor ID */
-#define PCI_VENDOR_ID_RP		0x11fe
-
-/*  Comtrol Device ID's */
-#define PCI_DEVICE_ID_RP32INTF		0x0001	/* Rocketport 32 port w/external I/F     */
-#define PCI_DEVICE_ID_RP8INTF		0x0002	/* Rocketport 8 port w/external I/F      */
-#define PCI_DEVICE_ID_RP16INTF		0x0003	/* Rocketport 16 port w/external I/F     */
-#define PCI_DEVICE_ID_RP4QUAD		0x0004	/* Rocketport 4 port w/quad cable        */
-#define PCI_DEVICE_ID_RP8OCTA		0x0005	/* Rocketport 8 port w/octa cable        */
-#define PCI_DEVICE_ID_RP8J		0x0006	/* Rocketport 8 port w/RJ11 connectors   */
-#define PCI_DEVICE_ID_RP4J		0x0007	/* Rocketport 4 port w/RJ11 connectors   */
-#define PCI_DEVICE_ID_RP8SNI		0x0008	/* Rocketport 8 port w/ DB78 SNI (Siemens) connector */
-#define PCI_DEVICE_ID_RP16SNI		0x0009	/* Rocketport 16 port w/ DB78 SNI (Siemens) connector   */
-#define PCI_DEVICE_ID_RPP4		0x000A	/* Rocketport Plus 4 port                */
-#define PCI_DEVICE_ID_RPP8		0x000B	/* Rocketport Plus 8 port                */
-#define PCI_DEVICE_ID_RP6M		0x000C	/* RocketModem 6 port                    */
-#define PCI_DEVICE_ID_RP4M		0x000D	/* RocketModem 4 port                    */
-#define PCI_DEVICE_ID_RP2_232           0x000E	/* Rocketport Plus 2 port RS232          */
-#define PCI_DEVICE_ID_RP2_422           0x000F	/* Rocketport Plus 2 port RS422          */ 
-
-/* Universal PCI boards  */
-#define PCI_DEVICE_ID_URP32INTF		0x0801	/* Rocketport UPCI 32 port w/external I/F */ 
-#define PCI_DEVICE_ID_URP8INTF		0x0802	/* Rocketport UPCI 8 port w/external I/F  */
-#define PCI_DEVICE_ID_URP16INTF		0x0803	/* Rocketport UPCI 16 port w/external I/F */
-#define PCI_DEVICE_ID_URP8OCTA		0x0805	/* Rocketport UPCI 8 port w/octa cable    */
-#define PCI_DEVICE_ID_UPCI_RM3_8PORT    0x080C	/* Rocketmodem III 8 port                 */
-#define PCI_DEVICE_ID_UPCI_RM3_4PORT    0x080D	/* Rocketmodem III 4 port                 */
-
-/* Compact PCI device */ 
-#define PCI_DEVICE_ID_CRP16INTF		0x0903	/* Rocketport Compact PCI 16 port w/external I/F */
-