tty: move obsolete and broken generic_serial drivers to drivers/staging/generic_serial/

As planned by Arnd Bergmann, this moves the following drivers to the
drivers/staging/generic_serial directory where they will be removed
after 2.6.41 if no one steps up to claim them.
	generic_serial
	rio
	ser_a2232
	sx
	vme_scc

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 98 deletions

diff --git a/drivers/char/rio/map.h b/drivers/char/rio/map.h
deleted file mode 100644
index 8366978578c1..000000000000
--- a/drivers/char/rio/map.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
-** -----------------------------------------------------------------------------
-**
-**  Perle Specialix driver for Linux
-**  Ported from existing RIO Driver for SCO sources.
- *
- *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**	Module		: map.h
-**	SID		: 1.2
-**	Last Modified	: 11/6/98 11:34:11
-**	Retrieved	: 11/6/98 11:34:21
-**
-**  ident @(#)map.h	1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_map_h__
-#define __rio_map_h__
-
-/*
-** mapping structure passed to and from the config.rio program to
-** determine the current topology of the world
-*/
-
-#define MAX_MAP_ENTRY 17
-#define	TOTAL_MAP_ENTRIES (MAX_MAP_ENTRY*RIO_SLOTS)
-#define	MAX_NAME_LEN 32
-
-struct Map {
-	unsigned int HostUniqueNum;	/* Supporting hosts unique number */
-	unsigned int RtaUniqueNum;	/* Unique number */
-	/*
-	 ** The next two IDs must be swapped on big-endian architectures
-	 ** when using a v2.04 /etc/rio/config with a v3.00 driver (when
-	 ** upgrading for example).
-	 */
-	unsigned short ID;		/* ID used in the subnet */
-	unsigned short ID2;		/* ID of 2nd block of 8 for 16 port */
-	unsigned long Flags;		/* Booted, ID Given, Disconnected */
-	unsigned long SysPort;		/* First tty mapped to this port */
-	struct Top Topology[LINKS_PER_UNIT];	/* ID connected to each link */
-	char Name[MAX_NAME_LEN];	/* Cute name by which RTA is known */
-};
-
-/*
-** Flag values:
-*/
-#define	RTA_BOOTED		0x00000001
-#define RTA_NEWBOOT		0x00000010
-#define	MSG_DONE		0x00000020
-#define	RTA_INTERCONNECT	0x00000040
-#define	RTA16_SECOND_SLOT	0x00000080
-#define	BEEN_HERE		0x00000100
-#define SLOT_TENTATIVE		0x40000000
-#define SLOT_IN_USE		0x80000000
-
-/*
-** HostUniqueNum is the unique number from the host card that this RTA
-** is to be connected to.
-** RtaUniqueNum is the unique number of the RTA concerned. It will be ZERO
-** if the slot in the table is unused. If it is the same as the HostUniqueNum
-** then this slot represents a host card.
-** Flags contains current boot/route state info
-** SysPort is a value in the range 0-504, being the number of the first tty
-** on this RTA. Each RTA supports 8 ports. The SysPort value must be modulo 8.
-** SysPort 0-127 correspond to /dev/ttyr001 to /dev/ttyr128, with minor
-** numbers 0-127. SysPort 128-255 correspond to /dev/ttyr129 to /dev/ttyr256,
-** again with minor numbers 0-127, and so on for SysPorts 256-383 and 384-511
-** ID will be in the range 0-16 for a `known' RTA. ID will be 0xFFFF for an
-** unused slot/unknown ID etc.
-** The Topology array contains the ID of the unit connected to each of the
-** four links on this unit. The entry will be 0xFFFF if NOTHING is connected
-** to the link, or will be 0xFF00 if an UNKNOWN unit is connected to the link.
-** The Name field is a null-terminated string, upto 31 characters, containing
-** the 'cute' name that the sysadmin/users know the RTA by. It is permissible
-** for this string to contain any character in the range \040 to \176 inclusive.
-** In particular, ctrl sequences and DEL (0x7F, \177) are not allowed. The
-** special character '%' IS allowable, and needs no special action.
-**
-*/
-
-#endif