Remove legacy CDROM drivers

They are all broken beyond repair. Given that nobody has complained
about them (most haven't worked in 2.6 AT ALL), remove them from the
tree.

A new mitsumi driver that actually works is in progress, it'll get
added when completed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

22 files changed, 0 insertions, 24845 deletions

diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
deleted file mode 100644
index 4b12e9031fb3..000000000000
--- a/drivers/cdrom/Kconfig
+++ /dev/null
@@ -1,213 +0,0 @@
-#
-# CDROM driver configuration
-#
-
-menu "Old CD-ROM drivers (not SCSI, not IDE)"
-	depends on ISA && BLOCK
-
-config CD_NO_IDESCSI
-	bool "Support non-SCSI/IDE/ATAPI CDROM drives"
-	---help---
-	  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
-	  here, otherwise N. Read the CD-ROM-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about these CD-ROM drives. If you are unsure what you
-	  have, say Y and find out whether you have one of the following
-	  drives.
-
-	  For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
-	  exists. Especially in cases where you do not know exactly which kind
-	  of drive you have you should read there. Most of these drivers use a
-	  file drivers/cdrom/{driver_name}.h where you can define your
-	  interface parameters and switch some internal goodies.
-
-	  To compile these CD-ROM drivers as a module, choose M instead of Y.
-
-	  If you want to use any of these CD-ROM drivers, you also have to
-	  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
-	  answer will get "defaulted" for you if you enable any of the Linux
-	  CD-ROM drivers).
-
-config AZTCD
-	tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM  CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  This is your driver if you have an Aztech CDA268-01A, Orchid
-	  CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
-	  CR540 CD-ROM drive.  This driver -- just like all these CD-ROM
-	  drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
-	  as Aztech CDA269-031SE. Please read the file
-	  <file:Documentation/cdrom/aztcd>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aztcd.
-
-config GSCD
-	tristate "Goldstar R420 CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  If this is your CD-ROM drive, say Y here.  As described in the file
-	  <file:Documentation/cdrom/gscd>, you might have to change a setting
-	  in the file <file:drivers/cdrom/gscd.h> before compiling the
-	  kernel.  Please read the file <file:Documentation/cdrom/gscd>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called gscd.
-
-config SBPCD
-	tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
-	depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-	---help---
-	  This driver supports most of the drives which use the Panasonic or
-	  Sound Blaster interface.  Please read the file
-	  <file:Documentation/cdrom/sbpcd>.
-
-	  The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
-	  (sometimes labeled "Creative"), the Creative Labs CD200, the
-	  Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
-	  model), the TEAC CD-55A fall under this category.  Some other
-	  "electrically compatible" drives (Vertos, Genoa, some Funai models)
-	  are currently not supported; for the Sanyo H94A drive currently a
-	  separate driver (asked later) is responsible.  Most drives have a
-	  uniquely shaped faceplate, with a caddyless motorized drawer, but
-	  without external brand markings.  The older CR-52x drives have a
-	  caddy and manual loading/eject, but still no external markings.  The
-	  driver is able to do an extended auto-probing for interface
-	  addresses and drive types; this can help to find facts in cases you
-	  are not sure, but can consume some time during the boot process if
-	  none of the supported drives gets found.  Once your drive got found,
-	  you should enter the reported parameters into
-	  <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
-
-	  This driver can support up to four CD-ROM controller cards, and each
-	  card can support up to four CD-ROM drives; if you say Y here, you
-	  will be asked how many controller cards you have.  If compiled as a
-	  module, only one controller card (but with up to four drives) is
-	  usable.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sbpcd.
-
-config MCDX
-	tristate "Mitsumi CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  Use this driver if you want to be able to use your Mitsumi LU-005,
-	  FX-001 or FX-001D CD-ROM drive.
-
-	  Please read the file <file:Documentation/cdrom/mcdx>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mcdx.
-
-config OPTCD
-	tristate "Optics Storage DOLPHIN 8000AT CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
-	  compatible interface. It also works with the Lasermate CR328A. If
-	  you have one of those, say Y. This driver does not work for the
-	  Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
-	  one. Please read the file <file:Documentation/cdrom/optcd>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called optcd.
-
-config CM206
-	tristate "Philips/LMS CM206 CDROM support"
-	depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-	---help---
-	  If you have a Philips/LMS CD-ROM drive cm206 in combination with a
-	  cm260 host adapter card, say Y here. Please also read the file
-	  <file:Documentation/cdrom/cm206>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cm206.
-
-config SJCD
-	tristate "Sanyo CDR-H94A CDROM support"
-	depends on CD_NO_IDESCSI
-	help
-	  If this is your CD-ROM drive, say Y here and read the file
-	  <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
-	  "ISO 9660 CD-ROM file system support" below, because that's the
-	  file system used on CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sjcd.
-
-config ISP16_CDI
-	tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  These are sound cards with built-in cdrom interfaces using the OPTi
-	  82C928 or 82C929 chips. Say Y here to have them detected and
-	  possibly configured at boot time. In addition, You'll have to say Y
-	  to a driver for the particular cdrom drive you have attached to the
-	  card. Read <file:Documentation/cdrom/isp16> for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called isp16.
-
-config CDU31A
-	tristate "Sony CDU31A/CDU33A CDROM support"
-	depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-	---help---
-	  These CD-ROM drives have a spring-pop-out caddyless drawer, and a
-	  rectangular green LED centered beneath it.  NOTE: these CD-ROM
-	  drives will not be auto detected by the kernel at boot time; you
-	  have to provide the interface address as an option to the kernel at
-	  boot time as described in <file:Documentation/cdrom/cdu31a> or fill
-	  in your parameters into <file:drivers/cdrom/cdu31a.c>.  Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cdu31a.
-
-config CDU535
-	tristate "Sony CDU535 CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
-	  drives. Please read the file <file:Documentation/cdrom/sonycd535>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sonycd535.
-
-endmenu
diff --git a/drivers/cdrom/Makefile b/drivers/cdrom/Makefile
index d1d1e5a4be73..774c180a4e11 100644
--- a/drivers/cdrom/Makefile
+++ b/drivers/cdrom/Makefile
@@ -10,14 +10,4 @@ obj-$(CONFIG_BLK_DEV_SR)	+=              cdrom.o
 obj-$(CONFIG_PARIDE_PCD)	+=		cdrom.o
 obj-$(CONFIG_CDROM_PKTCDVD)	+=		cdrom.o
 
-obj-$(CONFIG_AZTCD)		+= aztcd.o
-obj-$(CONFIG_CDU31A)		+= cdu31a.o     cdrom.o
-obj-$(CONFIG_CM206)		+= cm206.o      cdrom.o
-obj-$(CONFIG_GSCD)		+= gscd.o
-obj-$(CONFIG_ISP16_CDI)		+= isp16.o
-obj-$(CONFIG_MCDX)		+= mcdx.o       cdrom.o
-obj-$(CONFIG_OPTCD)		+= optcd.o
-obj-$(CONFIG_SBPCD)		+= sbpcd.o      cdrom.o
-obj-$(CONFIG_SJCD)		+= sjcd.o
-obj-$(CONFIG_CDU535)		+= sonycd535.o
 obj-$(CONFIG_VIOCD)		+= viocd.o      cdrom.o
diff --git a/drivers/cdrom/aztcd.c b/drivers/cdrom/aztcd.c
deleted file mode 100644
index d7fbfaae2449..000000000000
--- a/drivers/cdrom/aztcd.c
+++ /dev/null
@@ -1,2492 +0,0 @@
-#define AZT_VERSION "2.60"
-
-/*      $Id: aztcd.c,v 2.60 1997/11/29 09:51:19 root Exp root $
-	linux/drivers/block/aztcd.c - Aztech CD268 CDROM driver
-
-	Copyright (C) 1994-98 Werner Zimmermann(Werner.Zimmermann@fht-esslingen.de)
-
-	based on Mitsumi CDROM driver by  Martin Hariss and preworks by
-	Eberhard Moenkeberg; contains contributions by Joe Nardone and Robby 
-	Schirmer.
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2, or (at your option)
-	any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-	HISTORY
-	V0.0    Adaption to Aztech CD268-01A Version 1.3
-		Version is PRE_ALPHA, unresolved points:
-		1. I use busy wait instead of timer wait in STEN_LOW,DTEN_LOW
-		   thus driver causes CPU overhead and is very slow 
-		2. could not find a way to stop the drive, when it is
-		   in data read mode, therefore I had to set
-		   msf.end.min/sec/frame to 0:0:1 (in azt_poll); so only one
-		   frame can be read in sequence, this is also the reason for
-		3. getting 'timeout in state 4' messages, but nevertheless
-		   it works
-		W.Zimmermann, Oct. 31, 1994
-	V0.1    Version is ALPHA, problems #2 and #3 resolved.  
-		W.Zimmermann, Nov. 3, 1994
-	V0.2    Modification to some comments, debugging aids for partial test
-		with Borland C under DOS eliminated. Timer interrupt wait 
-		STEN_LOW_WAIT additionally to busy wait for STEN_LOW implemented; 
-		use it only for the 'slow' commands (ACMD_GET_Q_CHANNEL, ACMD_
-		SEEK_TO_LEAD_IN), all other commands are so 'fast', that busy 
-		waiting seems better to me than interrupt rescheduling.
-		Besides that, when used in the wrong place, STEN_LOW_WAIT causes
-		kernel panic.
-		In function aztPlay command ACMD_PLAY_AUDIO added, should make
-		audio functions work. The Aztech drive needs different commands
-		to read data tracks and play audio tracks.
-		W.Zimmermann, Nov. 8, 1994
-	V0.3    Recognition of missing drive during boot up improved (speeded up).
-		W.Zimmermann, Nov. 13, 1994
-	V0.35   Rewrote the control mechanism in azt_poll (formerly mcd_poll) 
-		including removal of all 'goto' commands. :-); 
-		J. Nardone, Nov. 14, 1994
-	V0.4    Renamed variables and constants to 'azt' instead of 'mcd'; had
-		to make some "compatibility" defines in azt.h; please note,
-		that the source file was renamed to azt.c, the include file to
-		azt.h                
-		Speeded up drive recognition during init (will be a little bit 
-		slower than before if no drive is installed!); suggested by
-		Robby Schirmer.
-		read_count declared volatile and set to AZT_BUF_SIZ to make
-		drive faster (now 300kB/sec, was 60kB/sec before, measured
-		by 'time dd if=/dev/cdrom of=/dev/null bs=2048 count=4096';
-		different AZT_BUF_SIZes were test, above 16 no further im-
-		provement seems to be possible; suggested by E.Moenkeberg.
-		W.Zimmermann, Nov. 18, 1994
-	V0.42   Included getAztStatus command in GetQChannelInfo() to allow
-		reading Q-channel info on audio disks, if drive is stopped, 
-		and some other bug fixes in the audio stuff, suggested by 
-		Robby Schirmer.
-		Added more ioctls (reading data in mode 1 and mode 2).
-		Completely removed the old azt_poll() routine.
-		Detection of ORCHID CDS-3110 in aztcd_init implemented.
-		Additional debugging aids (see the readme file).
-		W.Zimmermann, Dec. 9, 1994  
-	V0.50   Autodetection of drives implemented.
-		W.Zimmermann, Dec. 12, 1994
-	V0.52   Prepared for including in the standard kernel, renamed most
-		variables to contain 'azt', included autoconf.h
-		W.Zimmermann, Dec. 16, 1994        
-	V0.6    Version for being included in the standard Linux kernel.
-		Renamed source and header file to aztcd.c and aztcd.h
-		W.Zimmermann, Dec. 24, 1994
-	V0.7    Changed VERIFY_READ to VERIFY_WRITE in aztcd_ioctl, case
-		CDROMREADMODE1 and CDROMREADMODE2; bug fix in the ioctl,
-		which causes kernel crashes when playing audio, changed 
-		include-files (config.h instead of autoconf.h, removed
-		delay.h)
-		W.Zimmermann, Jan. 8, 1995
-	V0.72   Some more modifications for adaption to the standard kernel.
-		W.Zimmermann, Jan. 16, 1995
-        V0.80   aztcd is now part of the standard kernel since version 1.1.83.
-                Modified the SET_TIMER and CLEAR_TIMER macros to comply with
-                the new timer scheme.
-                W.Zimmermann, Jan. 21, 1995
-        V0.90   Included CDROMVOLCTRL, but with my Aztech drive I can only turn
-                the channels on and off. If it works better with your drive, 
-                please mail me. Also implemented ACMD_CLOSE for CDROMSTART.
-                W.Zimmermann, Jan. 24, 1995
-        V1.00   Implemented close and lock tray commands. Patches supplied by
-		Frank Racis        
-                Added support for loadable MODULEs, so aztcd can now also be
-                loaded by insmod and removed by rmmod during run time
-                Werner Zimmermann, Mar. 24, 95
-        V1.10   Implemented soundcard configuration for Orchid CDS-3110 drives
-                connected to Soundwave32 cards. Release for LST 2.1.
-                (still experimental)
-                Werner Zimmermann, May 8, 95
-        V1.20   Implemented limited support for DOSEMU0.60's cdrom.c. Now it works, but
-                sometimes DOSEMU may hang for 30 seconds or so. A fully functional ver-
-                sion needs an update of Dosemu0.60's cdrom.c, which will come with the 
-                next revision of Dosemu.
-                Also Soundwave32 support now works.
-                Werner Zimmermann, May 22, 95
-	V1.30   Auto-eject feature. Inspired by Franc Racis (racis@psu.edu)
-	        Werner Zimmermann, July 4, 95
-	V1.40   Started multisession support. Implementation copied from mcdx.c
-	        by Heiko Schlittermann. Not tested yet.
-	        Werner Zimmermann, July 15, 95
-        V1.50   Implementation of ioctl CDROMRESET, continued multisession, began
-                XA, but still untested. Heavy modifications to drive status de-
-                tection.
-                Werner Zimmermann, July 25, 95
-        V1.60   XA support now should work. Speeded up drive recognition in cases, 
-                where no drive is installed.
-                Werner Zimmermann, August 8, 1995
-        V1.70   Multisession support now is completed, but there is still not 
-                enough testing done. If you can test it, please contact me. For
-                details please read Documentation/cdrom/aztcd
-                Werner Zimmermann, August 19, 1995
-        V1.80   Modification to suit the new kernel boot procedure introduced
-                with kernel 1.3.33. Will definitely not work with older kernels.
-                Programming done by Linus himself.
-                Werner Zimmermann, October 11, 1995
-	V1.90   Support for Conrad TXC drives, thank's to Jochen Kunz and Olaf Kaluza.
-	        Werner Zimmermann, October 21, 1995
-        V2.00   Changed #include "blk.h" to <linux/blk.h> as the directory
-                structure was changed. README.aztcd is now /usr/src/docu-
-                mentation/cdrom/aztcd
-                Werner Zimmermann, November 10, 95
-        V2.10   Started to modify azt_poll to prevent reading beyond end of
-                tracks.
-                Werner Zimmermann, December 3, 95
-        V2.20   Changed some comments
-                Werner Zimmermann, April 1, 96
-        V2.30   Implemented support for CyCDROM CR520, CR940, Code for CR520 
-        	delivered by H.Berger with preworks by E.Moenkeberg.
-                Werner Zimmermann, April 29, 96
-        V2.40   Reorganized the placement of functions in the source code file
-                to reflect the layered approach; did not actually change code
-                Werner Zimmermann, May 1, 96
-        V2.50   Heiko Eissfeldt suggested to remove some VERIFY_READs in 
-                aztcd_ioctl; check_aztcd_media_change modified 
-                Werner Zimmermann, May 16, 96       
-	V2.60   Implemented Auto-Probing; made changes for kernel's 2.1.xx blocksize
-                Adaption to linux kernel > 2.1.0
-		Werner Zimmermann, Nov 29, 97
-		
-        November 1999 -- Make kernel-parameter implementation work with 2.3.x 
-	                 Removed init_module & cleanup_module in favor of 
-			 module_init & module_exit.
-			 Torben Mathiasen <tmm@image.dk>
-*/
-
-#include <linux/blkdev.h>
-#include "aztcd.h"
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/major.h>
-
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include <asm/uaccess.h>
-
-/*###########################################################################
-  Defines
-  ###########################################################################
-*/
-
-#define MAJOR_NR AZTECH_CDROM_MAJOR
-#define QUEUE (azt_queue)
-#define CURRENT elv_next_request(azt_queue)
-#define SET_TIMER(func, jifs)   delay_timer.expires = jiffies + (jifs); \
-                                delay_timer.function = (void *) (func); \
-                                add_timer(&delay_timer);
-
-#define CLEAR_TIMER             del_timer(&delay_timer);
-
-#define RETURNM(message,value) {printk("aztcd: Warning: %s failed\n",message);\
-                                return value;}
-#define RETURN(message)        {printk("aztcd: Warning: %s failed\n",message);\
-                                return;}
-
-/* Macros to switch the IDE-interface to the slave device and back to the master*/
-#define SWITCH_IDE_SLAVE  outb_p(0xa0,azt_port+6); \
-	                  outb_p(0x10,azt_port+6); \
-	                  outb_p(0x00,azt_port+7); \
-	                  outb_p(0x10,azt_port+6);
-#define SWITCH_IDE_MASTER outb_p(0xa0,azt_port+6);
-
-
-#if 0
-#define AZT_TEST
-#define AZT_TEST1		/* <int-..> */
-#define AZT_TEST2		/* do_aztcd_request */
-#define AZT_TEST3		/* AZT_S_state */
-#define AZT_TEST4		/* QUICK_LOOP-counter */
-#define AZT_TEST5		/* port(1) state */
-#define AZT_DEBUG
-#define AZT_DEBUG_MULTISESSION
-#endif
-
-static struct request_queue *azt_queue;
-
-static int current_valid(void)
-{
-        return CURRENT &&
-		rq_data_dir(CURRENT) == READ &&
-		CURRENT->sector != -1;
-}
-
-#define AFL_STATUSorDATA (AFL_STATUS | AFL_DATA)
-#define AZT_BUF_SIZ 16
-
-#define READ_TIMEOUT 3000
-
-#define azt_port aztcd		/*needed for the modutils */
-
-/*##########################################################################
-  Type Definitions
-  ##########################################################################
-*/
-enum azt_state_e { AZT_S_IDLE,	/* 0 */
-	AZT_S_START,		/* 1 */
-	AZT_S_MODE,		/* 2 */
-	AZT_S_READ,		/* 3 */
-	AZT_S_DATA,		/* 4 */
-	AZT_S_STOP,		/* 5 */
-	AZT_S_STOPPING		/* 6 */
-};
-enum azt_read_modes { AZT_MODE_0,	/*read mode for audio disks, not supported by Aztech firmware */
-	AZT_MODE_1,		/*read mode for normal CD-ROMs */
-	AZT_MODE_2		/*read mode for XA CD-ROMs */
-};
-
-/*##########################################################################
-  Global Variables
-  ##########################################################################
-*/
-static int aztPresent = 0;
-
-static volatile int azt_transfer_is_active = 0;
-
-static char azt_buf[CD_FRAMESIZE_RAW * AZT_BUF_SIZ];	/*buffer for block size conversion */
-#if AZT_PRIVATE_IOCTLS
-static char buf[CD_FRAMESIZE_RAW];	/*separate buffer for the ioctls */
-#endif
-
-static volatile int azt_buf_bn[AZT_BUF_SIZ], azt_next_bn;
-static volatile int azt_buf_in, azt_buf_out = -1;
-static volatile int azt_error = 0;
-static int azt_open_count = 0;
-static volatile enum azt_state_e azt_state = AZT_S_IDLE;
-#ifdef AZT_TEST3
-static volatile enum azt_state_e azt_state_old = AZT_S_STOP;
-static volatile int azt_st_old = 0;
-#endif
-static volatile enum azt_read_modes azt_read_mode = AZT_MODE_1;
-
-static int azt_mode = -1;
-static volatile int azt_read_count = 1;
-
-static int azt_port = AZT_BASE_ADDR;
-
-module_param(azt_port, int, 0);
-
-static int azt_port_auto[16] = AZT_BASE_AUTO;
-
-static char azt_cont = 0;
-static char azt_init_end = 0;
-static char azt_auto_eject = AZT_AUTO_EJECT;
-
-static int AztTimeout, AztTries;
-static DECLARE_WAIT_QUEUE_HEAD(azt_waitq);
-static DEFINE_TIMER(delay_timer, NULL, 0, 0);
-
-static struct azt_DiskInfo DiskInfo;
-static struct azt_Toc Toc[MAX_TRACKS];
-static struct azt_Play_msf azt_Play;
-
-static int aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-static char aztDiskChanged = 1;
-static char aztTocUpToDate = 0;
-
-static unsigned char aztIndatum;
-static unsigned long aztTimeOutCount;
-static int aztCmd = 0;
-
-static DEFINE_SPINLOCK(aztSpin);
-
-/*###########################################################################
-   Function Prototypes
-  ###########################################################################
-*/
-/* CDROM Drive Low Level I/O Functions */
-static void aztStatTimer(void);
-
-/* CDROM Drive Command Functions */
-static int aztGetDiskInfo(void);
-#if AZT_MULTISESSION
-static int aztGetMultiDiskInfo(void);
-#endif
-static int aztGetToc(int multi);
-
-/* Kernel Interface Functions */
-static int check_aztcd_media_change(struct gendisk *disk);
-static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
-		       unsigned long arg);
-static int aztcd_open(struct inode *ip, struct file *fp);
-static int aztcd_release(struct inode *inode, struct file *file);
-
-static struct block_device_operations azt_fops = {
-	.owner		= THIS_MODULE,
-	.open		= aztcd_open,
-	.release	= aztcd_release,
-	.ioctl		= aztcd_ioctl,
-	.media_changed	= check_aztcd_media_change,
-};
-
-/* Aztcd State Machine: Controls Drive Operating State */
-static void azt_poll(void);
-
-/* Miscellaneous support functions */
-static void azt_hsg2msf(long hsg, struct msf *msf);
-static long azt_msf2hsg(struct msf *mp);
-static void azt_bin2bcd(unsigned char *p);
-static int azt_bcd2bin(unsigned char bcd);
-
-/*##########################################################################
-  CDROM Drive Low Level I/O Functions
-  ##########################################################################
-*/
-/* Macros for the drive hardware interface handshake, these macros use
-   busy waiting */
-/* Wait for OP_OK = drive answers with AFL_OP_OK after receiving a command*/
-# define OP_OK op_ok()
-static void op_ok(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(DATA_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			printk("aztcd: Error Wait OP_OK\n");
-			break;
-		}
-	} while (aztIndatum != AFL_OP_OK);
-}
-
-/* Wait for PA_OK = drive answers with AFL_PA_OK after receiving parameters*/
-#if 0
-# define PA_OK pa_ok()
-static void pa_ok(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(DATA_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			printk("aztcd: Error Wait PA_OK\n");
-			break;
-		}
-	} while (aztIndatum != AFL_PA_OK);
-}
-#endif
-
-/* Wait for STEN=Low = handshake signal 'AFL_.._OK available or command executed*/
-# define STEN_LOW  sten_low()
-static void sten_low(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(STATUS_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			if (azt_init_end)
-				printk
-				    ("aztcd: Error Wait STEN_LOW commands:%x\n",
-				     aztCmd);
-			break;
-		}
-	} while (aztIndatum & AFL_STATUS);
-}
-
-/* Wait for DTEN=Low = handshake signal 'Data available'*/
-# define DTEN_LOW dten_low()
-static void dten_low(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(STATUS_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			printk("aztcd: Error Wait DTEN_OK\n");
-			break;
-		}
-	} while (aztIndatum & AFL_DATA);
-}
-
-/* 
- * Macro for timer wait on STEN=Low, should only be used for 'slow' commands;
- * may cause kernel panic when used in the wrong place
-*/
-#define STEN_LOW_WAIT   statusAzt()
-static void statusAzt(void)
-{
-	AztTimeout = AZT_STATUS_DELAY;
-	SET_TIMER(aztStatTimer, HZ / 100);
-	sleep_on(&azt_waitq);
-	if (AztTimeout <= 0)
-		printk("aztcd: Error Wait STEN_LOW_WAIT command:%x\n",
-		       aztCmd);
-	return;
-}
-
-static void aztStatTimer(void)
-{
-	if (!(inb(STATUS_PORT) & AFL_STATUS)) {
-		wake_up(&azt_waitq);
-		return;
-	}
-	AztTimeout--;
-	if (AztTimeout <= 0) {
-		wake_up(&azt_waitq);
-		printk("aztcd: Error aztStatTimer: Timeout\n");
-		return;
-	}
-	SET_TIMER(aztStatTimer, HZ / 100);
-}
-
-/*##########################################################################
-  CDROM Drive Command Functions
-  ##########################################################################
-*/
-/* 
- * Send a single command, return -1 on error, else 0
-*/
-static int aztSendCmd(int cmd)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: Executing command %x\n", cmd);
-#endif
-
-	if ((azt_port == 0x1f0) || (azt_port == 0x170))
-		SWITCH_IDE_SLAVE;	/*switch IDE interface to slave configuration */
-
-	aztCmd = cmd;
-	outb(POLLED, MODE_PORT);
-	do {
-		if (inb(STATUS_PORT) & AFL_STATUS)
-			break;
-		inb(DATA_PORT);	/* if status left from last command, read and */
-	} while (1);		/* discard it */
-	do {
-		if (inb(STATUS_PORT) & AFL_DATA)
-			break;
-		inb(DATA_PORT);	/* if data left from last command, read and */
-	} while (1);		/* discard it */
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		outb((unsigned char) cmd, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_OP_OK) {
-			return 0;
-		}		/*OP_OK? */
-		if (data == AFL_OP_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk
-			    ("### Error 1 aztcd: aztSendCmd %x  Error Code %x\n",
-			     cmd, data);
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: aztSendCmd %x \n", cmd);
-		azt_error = 0xA5;
-	}
-	RETURNM("aztSendCmd", -1);
-}
-
-/*
- * Send a play or read command to the drive, return -1 on error, else 0
-*/
-static int sendAztCmd(int cmd, struct azt_Play_msf *params)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: play start=%02x:%02x:%02x  end=%02x:%02x:%02x\n",
-	       params->start.min, params->start.sec, params->start.frame,
-	       params->end.min, params->end.sec, params->end.frame);
-#endif
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		aztSendCmd(cmd);
-		outb(params->start.min, CMD_PORT);
-		outb(params->start.sec, CMD_PORT);
-		outb(params->start.frame, CMD_PORT);
-		outb(params->end.min, CMD_PORT);
-		outb(params->end.sec, CMD_PORT);
-		outb(params->end.frame, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_PA_OK) {
-			return 0;
-		}		/*PA_OK ? */
-		if (data == AFL_PA_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk
-			    ("### Error 1 aztcd: sendAztCmd %x  Error Code %x\n",
-			     cmd, data);
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: sendAztCmd %x\n ", cmd);
-		azt_error = 0xA5;
-	}
-	RETURNM("sendAztCmd", -1);
-}
-
-/*
- * Send a seek command to the drive, return -1 on error, else 0
-*/
-static int aztSeek(struct azt_Play_msf *params)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: aztSeek %02x:%02x:%02x\n",
-	       params->start.min, params->start.sec, params->start.frame);
-#endif
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		aztSendCmd(ACMD_SEEK);
-		outb(params->start.min, CMD_PORT);
-		outb(params->start.sec, CMD_PORT);
-		outb(params->start.frame, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_PA_OK) {
-			return 0;
-		}		/*PA_OK ? */
-		if (data == AFL_PA_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk("### Error 1 aztcd: aztSeek\n");
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: aztSeek\n ");
-		azt_error = 0xA5;
-	}
-	RETURNM("aztSeek", -1);
-}
-
-/* Send a Set Disk Type command
-   does not seem to work with Aztech drives, behavior is completely indepen-
-   dent on which mode is set ???
-*/
-static int aztSetDiskType(int type)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: set disk type command: type= %i\n", type);
-#endif
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		aztSendCmd(ACMD_SET_DISK_TYPE);
-		outb(type, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_PA_OK) {	/*PA_OK ? */
-			azt_read_mode = type;
-			return 0;
-		}
-		if (data == AFL_PA_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk
-			    ("### Error 1 aztcd: aztSetDiskType %x Error Code %x\n",
-			     type, data);
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: aztSetDiskType %x\n ", type);
-		azt_error = 0xA5;
-	}
-	RETURNM("aztSetDiskType", -1);
-}
-
-
-/* used in azt_poll to poll the status, expects another program to issue a 
- * ACMD_GET_STATUS directly before 
- */
-static int aztStatus(void)
-{
-	int st;
-/*	int i;
-
-	i = inb(STATUS_PORT) & AFL_STATUS;    is STEN=0?    ???
-	if (!i)
-*/ STEN_LOW;
-	if (aztTimeOutCount < AZT_TIMEOUT) {
-		st = inb(DATA_PORT) & 0xFF;
-		return st;
-	} else
-		RETURNM("aztStatus", -1);
-}
-
-/*
- * Get the drive status
- */
-static int getAztStatus(void)
-{
-	int st;
-
-	if (aztSendCmd(ACMD_GET_STATUS))
-		RETURNM("getAztStatus 1", -1);
-	STEN_LOW;
-	st = inb(DATA_PORT) & 0xFF;
-#ifdef AZT_DEBUG
-	printk("aztcd: Status = %x\n", st);
-#endif
-	if ((st == 0xFF) || (st & AST_CMD_CHECK)) {
-		printk
-		    ("aztcd: AST_CMD_CHECK error or no status available\n");
-		return -1;
-	}
-
-	if (((st & AST_MODE_BITS) != AST_BUSY)
-	    && (aztAudioStatus == CDROM_AUDIO_PLAY))
-		/* XXX might be an error? look at q-channel? */
-		aztAudioStatus = CDROM_AUDIO_COMPLETED;
-
-	if ((st & AST_DSK_CHG) || (st & AST_NOT_READY)) {
-		aztDiskChanged = 1;
-		aztTocUpToDate = 0;
-		aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-	}
-	return st;
-}
-
-
-/*
- * Send a 'Play' command and get the status.  Use only from the top half.
- */
-static int aztPlay(struct azt_Play_msf *arg)
-{
-	if (sendAztCmd(ACMD_PLAY_AUDIO, arg) < 0)
-		RETURNM("aztPlay", -1);
-	return 0;
-}
-
-/*
- * Subroutines to automatically close the door (tray) and 
- * lock it closed when the cd is mounted.  Leave the tray
- * locking as an option
- */
-static void aztCloseDoor(void)
-{
-	aztSendCmd(ACMD_CLOSE);
-	STEN_LOW;
-	return;
-}
-
-static void aztLockDoor(void)
-{
-#if AZT_ALLOW_TRAY_LOCK
-	aztSendCmd(ACMD_LOCK);
-	STEN_LOW;
-#endif
-	return;
-}
-
-static void aztUnlockDoor(void)
-{
-#if AZT_ALLOW_TRAY_LOCK
-	aztSendCmd(ACMD_UNLOCK);
-	STEN_LOW;
-#endif
-	return;
-}
-
-/*
- * Read a value from the drive.  Should return quickly, so a busy wait
- * is used to avoid excessive rescheduling. The read command itself must
- * be issued with aztSendCmd() directly before
- */
-static int aztGetValue(unsigned char *result)
-{
-	int s;
-
-	STEN_LOW;
-	if (aztTimeOutCount >= AZT_TIMEOUT) {
-		printk("aztcd: aztGetValue timeout\n");
-		return -1;
-	}
-	s = inb(DATA_PORT) & 0xFF;
-	*result = (unsigned char) s;
-	return 0;
-}
-
-/*
- * Read the current Q-channel info.  Also used for reading the
- * table of contents.
- */
-static int aztGetQChannelInfo(struct azt_Toc *qp)
-{
-	unsigned char notUsed;
-	int st;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztGetQChannelInfo  Time:%li\n", jiffies);
-#endif
-	if ((st = getAztStatus()) == -1)
-		RETURNM("aztGetQChannelInfo 1", -1);
-	if (aztSendCmd(ACMD_GET_Q_CHANNEL))
-		RETURNM("aztGetQChannelInfo 2", -1);
-	/*STEN_LOW_WAIT; ??? Dosemu0.60's cdrom.c does not like STEN_LOW_WAIT here */
-	if (aztGetValue(&notUsed))
-		RETURNM("aztGetQChannelInfo 3", -1);	/*??? Nullbyte einlesen */
-	if ((st & AST_MODE_BITS) == AST_INITIAL) {
-		qp->ctrl_addr = 0;	/* when audio stop ACMD_GET_Q_CHANNEL returns */
-		qp->track = 0;	/* only one byte with Aztech drives */
-		qp->pointIndex = 0;
-		qp->trackTime.min = 0;
-		qp->trackTime.sec = 0;
-		qp->trackTime.frame = 0;
-		qp->diskTime.min = 0;
-		qp->diskTime.sec = 0;
-		qp->diskTime.frame = 0;
-		return 0;
-	} else {
-		if (aztGetValue(&qp->ctrl_addr) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->track) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->pointIndex) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->trackTime.min) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->trackTime.sec) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->trackTime.frame) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&notUsed) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->diskTime.min) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->diskTime.sec) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->diskTime.frame) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-	}
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztGetQChannelInfo  Time:%li\n", jiffies);
-#endif
-	return 0;
-}
-
-/*
- * Read the table of contents (TOC) and TOC header if necessary
- */
-static int aztUpdateToc(void)
-{
-	int st;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztUpdateToc  Time:%li\n", jiffies);
-#endif
-	if (aztTocUpToDate)
-		return 0;
-
-	if (aztGetDiskInfo() < 0)
-		return -EIO;
-
-	if (aztGetToc(0) < 0)
-		return -EIO;
-
-	/*audio disk detection
-	   with my Aztech drive there is no audio status bit, so I use the copy
-	   protection bit of the first track. If this track is copy protected 
-	   (copy bit = 0), I assume, it's an audio  disk. Strange, but works ??? */
-	if (!(Toc[DiskInfo.first].ctrl_addr & 0x40))
-		DiskInfo.audio = 1;
-	else
-		DiskInfo.audio = 0;
-
-	/* XA detection */
-	if (!DiskInfo.audio) {
-		azt_Play.start.min = 0;	/*XA detection only seems to work */
-		azt_Play.start.sec = 2;	/*when we play a track */
-		azt_Play.start.frame = 0;
-		azt_Play.end.min = 0;
-		azt_Play.end.sec = 0;
-		azt_Play.end.frame = 1;
-		if (sendAztCmd(ACMD_PLAY_READ, &azt_Play))
-			return -1;
-		DTEN_LOW;
-		for (st = 0; st < CD_FRAMESIZE; st++)
-			inb(DATA_PORT);
-	}
-	DiskInfo.xa = getAztStatus() & AST_MODE;
-	if (DiskInfo.xa) {
-		printk
-		    ("aztcd: XA support experimental - mail results to Werner.Zimmermann@fht-esslingen.de\n");
-	}
-
-	/*multisession detection
-	   support for multisession CDs is done automatically with Aztech drives,
-	   we don't have to take care about TOC redirection; if we want the isofs
-	   to take care about redirection, we have to set AZT_MULTISESSION to 1 */
-	DiskInfo.multi = 0;
-#if AZT_MULTISESSION
-	if (DiskInfo.xa) {
-		aztGetMultiDiskInfo();	/*here Disk.Info.multi is set */
-	}
-#endif
-	if (DiskInfo.multi) {
-		DiskInfo.lastSession.min = Toc[DiskInfo.next].diskTime.min;
-		DiskInfo.lastSession.sec = Toc[DiskInfo.next].diskTime.sec;
-		DiskInfo.lastSession.frame =
-		    Toc[DiskInfo.next].diskTime.frame;
-		printk("aztcd: Multisession support experimental\n");
-	} else {
-		DiskInfo.lastSession.min =
-		    Toc[DiskInfo.first].diskTime.min;
-		DiskInfo.lastSession.sec =
-		    Toc[DiskInfo.first].diskTime.sec;
-		DiskInfo.lastSession.frame =
-		    Toc[DiskInfo.first].diskTime.frame;
-	}
-
-	aztTocUpToDate = 1;
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztUpdateToc  Time:%li\n", jiffies);
-#endif
-	return 0;
-}
-
-
-/* Read the table of contents header, i.e. no. of tracks and start of first 
- * track
- */
-static int aztGetDiskInfo(void)
-{
-	int limit;
-	unsigned char test;
-	struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztGetDiskInfo  Time:%li\n", jiffies);
-#endif
-	if (aztSendCmd(ACMD_SEEK_TO_LEADIN))
-		RETURNM("aztGetDiskInfo 1", -1);
-	STEN_LOW_WAIT;
-	test = 0;
-	for (limit = 300; limit > 0; limit--) {
-		if (aztGetQChannelInfo(&qInfo) < 0)
-			RETURNM("aztGetDiskInfo 2", -1);
-		if (qInfo.pointIndex == 0xA0) {	/*Number of FirstTrack */
-			DiskInfo.first = qInfo.diskTime.min;
-			DiskInfo.first = azt_bcd2bin(DiskInfo.first);
-			test = test | 0x01;
-		}
-		if (qInfo.pointIndex == 0xA1) {	/*Number of LastTrack */
-			DiskInfo.last = qInfo.diskTime.min;
-			DiskInfo.last = azt_bcd2bin(DiskInfo.last);
-			test = test | 0x02;
-		}
-		if (qInfo.pointIndex == 0xA2) {	/*DiskLength */
-			DiskInfo.diskLength.min = qInfo.diskTime.min;
-			DiskInfo.diskLength.sec = qInfo.diskTime.sec;
-			DiskInfo.diskLength.frame = qInfo.diskTime.frame;
-			test = test | 0x04;
-		}
-		if ((qInfo.pointIndex == DiskInfo.first) && (test & 0x01)) {	/*StartTime of First Track */
-			DiskInfo.firstTrack.min = qInfo.diskTime.min;
-			DiskInfo.firstTrack.sec = qInfo.diskTime.sec;
-			DiskInfo.firstTrack.frame = qInfo.diskTime.frame;
-			test = test | 0x08;
-		}
-		if (test == 0x0F)
-			break;
-	}
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztGetDiskInfo  Time:%li\n", jiffies);
-	printk
-	    ("Disk Info: first %d last %d length %02X:%02X.%02X dez  first %02X:%02X.%02X dez\n",
-	     DiskInfo.first, DiskInfo.last, DiskInfo.diskLength.min,
-	     DiskInfo.diskLength.sec, DiskInfo.diskLength.frame,
-	     DiskInfo.firstTrack.min, DiskInfo.firstTrack.sec,
-	     DiskInfo.firstTrack.frame);
-#endif
-	if (test != 0x0F)
-		return -1;
-	return 0;
-}
-
-#if AZT_MULTISESSION
-/*
- * Get Multisession Disk Info
- */
-static int aztGetMultiDiskInfo(void)
-{
-	int limit, k = 5;
-	unsigned char test;
-	struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztGetMultiDiskInfo\n");
-#endif
-
-	do {
-		azt_Play.start.min = Toc[DiskInfo.last + 1].diskTime.min;
-		azt_Play.start.sec = Toc[DiskInfo.last + 1].diskTime.sec;
-		azt_Play.start.frame =
-		    Toc[DiskInfo.last + 1].diskTime.frame;
-		test = 0;
-
-		for (limit = 30; limit > 0; limit--) {	/*Seek for LeadIn of next session */
-			if (aztSeek(&azt_Play))
-				RETURNM("aztGetMultiDiskInfo 1", -1);
-			if (aztGetQChannelInfo(&qInfo) < 0)
-				RETURNM("aztGetMultiDiskInfo 2", -1);
-			if ((qInfo.track == 0) && (qInfo.pointIndex))
-				break;	/*LeadIn found */
-			if ((azt_Play.start.sec += 10) > 59) {
-				azt_Play.start.sec = 0;
-				azt_Play.start.min++;
-			}
-		}
-		if (!limit)
-			break;	/*Check, if a leadin track was found, if not we're
-				   at the end of the disk */
-#ifdef AZT_DEBUG_MULTISESSION
-		printk("leadin found track %d  pointIndex %x  limit %d\n",
-		       qInfo.track, qInfo.pointIndex, limit);
-#endif
-		for (limit = 300; limit > 0; limit--) {
-			if (++azt_Play.start.frame > 74) {
-				azt_Play.start.frame = 0;
-				if (azt_Play.start.sec > 59) {
-					azt_Play.start.sec = 0;
-					azt_Play.start.min++;
-				}
-			}
-			if (aztSeek(&azt_Play))
-				RETURNM("aztGetMultiDiskInfo 3", -1);
-			if (aztGetQChannelInfo(&qInfo) < 0)
-				RETURNM("aztGetMultiDiskInfo 4", -1);
-			if (qInfo.pointIndex == 0xA0) {	/*Number of NextTrack */
-				DiskInfo.next = qInfo.diskTime.min;
-				DiskInfo.next = azt_bcd2bin(DiskInfo.next);
-				test = test | 0x01;
-			}
-			if (qInfo.pointIndex == 0xA1) {	/*Number of LastTrack */
-				DiskInfo.last = qInfo.diskTime.min;
-				DiskInfo.last = azt_bcd2bin(DiskInfo.last);
-				test = test | 0x02;
-			}
-			if (qInfo.pointIndex == 0xA2) {	/*DiskLength */
-				DiskInfo.diskLength.min =
-				    qInfo.diskTime.min;
-				DiskInfo.diskLength.sec =
-				    qInfo.diskTime.sec;
-				DiskInfo.diskLength.frame =
-				    qInfo.diskTime.frame;
-				test = test | 0x04;
-			}
-			if ((qInfo.pointIndex == DiskInfo.next) && (test & 0x01)) {	/*StartTime of Next Track */
-				DiskInfo.nextSession.min =
-				    qInfo.diskTime.min;
-				DiskInfo.nextSession.sec =
-				    qInfo.diskTime.sec;
-				DiskInfo.nextSession.frame =
-				    qInfo.diskTime.frame;
-				test = test | 0x08;
-			}
-			if (test == 0x0F)
-				break;
-		}
-#ifdef AZT_DEBUG_MULTISESSION
-		printk
-		    ("MultiDisk Info: first %d next %d last %d length %02x:%02x.%02x dez  first %02x:%02x.%02x dez  next %02x:%02x.%02x dez\n",
-		     DiskInfo.first, DiskInfo.next, DiskInfo.last,
-		     DiskInfo.diskLength.min, DiskInfo.diskLength.sec,
-		     DiskInfo.diskLength.frame, DiskInfo.firstTrack.min,
-		     DiskInfo.firstTrack.sec, DiskInfo.firstTrack.frame,
-		     DiskInfo.nextSession.min, DiskInfo.nextSession.sec,
-		     DiskInfo.nextSession.frame);
-#endif
-		if (test != 0x0F)
-			break;
-		else
-			DiskInfo.multi = 1;	/*found TOC of more than one session */
-		aztGetToc(1);
-	} while (--k);
-
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztGetMultiDiskInfo  Time:%li\n", jiffies);
-#endif
-	return 0;
-}
-#endif
-
-/*
- * Read the table of contents (TOC)
- */
-static int aztGetToc(int multi)
-{
-	int i, px;
-	int limit;
-	struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztGetToc  Time:%li\n", jiffies);
-#endif
-	if (!multi) {
-		for (i = 0; i < MAX_TRACKS; i++)
-			Toc[i].pointIndex = 0;
-		i = DiskInfo.last + 3;
-	} else {
-		for (i = DiskInfo.next; i < MAX_TRACKS; i++)
-			Toc[i].pointIndex = 0;
-		i = DiskInfo.last + 4 - DiskInfo.next;
-	}
-
-/*Is there a good reason to stop motor before TOC read?
-  if (aztSendCmd(ACMD_STOP)) RETURNM("aztGetToc 1",-1);
-      STEN_LOW_WAIT;
-*/
-
-	if (!multi) {
-		azt_mode = 0x05;
-		if (aztSendCmd(ACMD_SEEK_TO_LEADIN))
-			RETURNM("aztGetToc 2", -1);
-		STEN_LOW_WAIT;
-	}
-	for (limit = 300; limit > 0; limit--) {
-		if (multi) {
-			if (++azt_Play.start.sec > 59) {
-				azt_Play.start.sec = 0;
-				azt_Play.start.min++;
-			}
-			if (aztSeek(&azt_Play))
-				RETURNM("aztGetToc 3", -1);
-		}
-		if (aztGetQChannelInfo(&qInfo) < 0)
-			break;
-
-		px = azt_bcd2bin(qInfo.pointIndex);
-
-		if (px > 0 && px < MAX_TRACKS && qInfo.track == 0)
-			if (Toc[px].pointIndex == 0) {
-				Toc[px] = qInfo;
-				i--;
-			}
-
-		if (i <= 0)
-			break;
-	}
-
-	Toc[DiskInfo.last + 1].diskTime = DiskInfo.diskLength;
-	Toc[DiskInfo.last].trackTime = DiskInfo.diskLength;
-
-#ifdef AZT_DEBUG_MULTISESSION
-	printk("aztcd: exiting aztGetToc\n");
-	for (i = 1; i <= DiskInfo.last + 1; i++)
-		printk
-		    ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez  %02X:%02X.%02X dez\n",
-		     i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex,
-		     Toc[i].trackTime.min, Toc[i].trackTime.sec,
-		     Toc[i].trackTime.frame, Toc[i].diskTime.min,
-		     Toc[i].diskTime.sec, Toc[i].diskTime.frame);
-	for (i = 100; i < 103; i++)
-		printk
-		    ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez  %02X:%02X.%02X dez\n",
-		     i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex,
-		     Toc[i].trackTime.min, Toc[i].trackTime.sec,
-		     Toc[i].trackTime.frame, Toc[i].diskTime.min,
-		     Toc[i].diskTime.sec, Toc[i].diskTime.frame);
-#endif
-
-	return limit > 0 ? 0 : -1;
-}
-
-
-/*##########################################################################
-  Kernel Interface Functions
-  ##########################################################################
-*/
-
-#ifndef MODULE
-static int __init aztcd_setup(char *str)
-{
-	int ints[4];
-
-	(void) get_options(str, ARRAY_SIZE(ints), ints);
-
-	if (ints[0] > 0)
-		azt_port = ints[1];
-	if (ints[1] > 1)
-		azt_cont = ints[2];
-	return 1;
-}
-
-__setup("aztcd=", aztcd_setup);
-
-#endif				/* !MODULE */
-
-/* 
- * Checking if the media has been changed
-*/
-static int check_aztcd_media_change(struct gendisk *disk)
-{
-	if (aztDiskChanged) {	/* disk changed */
-		aztDiskChanged = 0;
-		return 1;
-	} else
-		return 0;	/* no change */
-}
-
-/*
- * Kernel IO-controls
-*/
-static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
-		       unsigned long arg)
-{
-	int i;
-	struct azt_Toc qInfo;
-	struct cdrom_ti ti;
-	struct cdrom_tochdr tocHdr;
-	struct cdrom_msf msf;
-	struct cdrom_tocentry entry;
-	struct azt_Toc *tocPtr;
-	struct cdrom_subchnl subchnl;
-	struct cdrom_volctrl volctrl;
-	void __user *argp = (void __user *)arg;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztcd_ioctl - Command:%x   Time: %li\n",
-	       cmd, jiffies);
-	printk("aztcd Status %x\n", getAztStatus());
-#endif
-	if (!ip)
-		RETURNM("aztcd_ioctl 1", -EINVAL);
-	if (getAztStatus() < 0)
-		RETURNM("aztcd_ioctl 2", -EIO);
-	if ((!aztTocUpToDate) || (aztDiskChanged)) {
-		if ((i = aztUpdateToc()) < 0)
-			RETURNM("aztcd_ioctl 3", i);	/* error reading TOC */
-	}
-
-	switch (cmd) {
-	case CDROMSTART:	/* Spin up the drive. Don't know, what to do,
-				   at least close the tray */
-#if AZT_PRIVATE_IOCTLS
-		if (aztSendCmd(ACMD_CLOSE))
-			RETURNM("aztcd_ioctl 4", -1);
-		STEN_LOW_WAIT;
-#endif
-		break;
-	case CDROMSTOP:	/* Spin down the drive */
-		if (aztSendCmd(ACMD_STOP))
-			RETURNM("aztcd_ioctl 5", -1);
-		STEN_LOW_WAIT;
-		/* should we do anything if it fails? */
-		aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-		break;
-	case CDROMPAUSE:	/* Pause the drive */
-		if (aztAudioStatus != CDROM_AUDIO_PLAY)
-			return -EINVAL;
-
-		if (aztGetQChannelInfo(&qInfo) < 0) {	/* didn't get q channel info */
-			aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-			RETURNM("aztcd_ioctl 7", 0);
-		}
-		azt_Play.start = qInfo.diskTime;	/* remember restart point */
-
-		if (aztSendCmd(ACMD_PAUSE))
-			RETURNM("aztcd_ioctl 8", -1);
-		STEN_LOW_WAIT;
-		aztAudioStatus = CDROM_AUDIO_PAUSED;
-		break;
-	case CDROMRESUME:	/* Play it again, Sam */
-		if (aztAudioStatus != CDROM_AUDIO_PAUSED)
-			return -EINVAL;
-		/* restart the drive at the saved position. */
-		i = aztPlay(&azt_Play);
-		if (i < 0) {
-			aztAudioStatus = CDROM_AUDIO_ERROR;
-			return -EIO;
-		}
-		aztAudioStatus = CDROM_AUDIO_PLAY;
-		break;
-	case CDROMMULTISESSION:	/*multisession support -- experimental */
-		{
-			struct cdrom_multisession ms;
-#ifdef AZT_DEBUG
-			printk("aztcd ioctl MULTISESSION\n");
-#endif
-			if (copy_from_user(&ms, argp,
-			     sizeof(struct cdrom_multisession)))
-				return -EFAULT;
-			if (ms.addr_format == CDROM_MSF) {
-				ms.addr.msf.minute =
-				    azt_bcd2bin(DiskInfo.lastSession.min);
-				ms.addr.msf.second =
-				    azt_bcd2bin(DiskInfo.lastSession.sec);
-				ms.addr.msf.frame =
-				    azt_bcd2bin(DiskInfo.lastSession.
-						frame);
-			} else if (ms.addr_format == CDROM_LBA)
-				ms.addr.lba =
-				    azt_msf2hsg(&DiskInfo.lastSession);
-			else
-				return -EINVAL;
-			ms.xa_flag = DiskInfo.xa;
-			if (copy_to_user(argp, &ms,
-			     sizeof(struct cdrom_multisession)))
-				return -EFAULT;
-#ifdef AZT_DEBUG
-			if (ms.addr_format == CDROM_MSF)
-				printk
-				    ("aztcd multisession xa:%d, msf:%02x:%02x.%02x [%02x:%02x.%02x])\n",
-				     ms.xa_flag, ms.addr.msf.minute,
-				     ms.addr.msf.second, ms.addr.msf.frame,
-				     DiskInfo.lastSession.min,
-				     DiskInfo.lastSession.sec,
-				     DiskInfo.lastSession.frame);
-			else
-				printk
-				    ("aztcd multisession %d, lba:0x%08x [%02x:%02x.%02x])\n",
-				     ms.xa_flag, ms.addr.lba,
-				     DiskInfo.lastSession.min,
-				     DiskInfo.lastSession.sec,
-				     DiskInfo.lastSession.frame);
-#endif
-			return 0;
-		}
-	case CDROMPLAYTRKIND:	/* Play a track.  This currently ignores index. */
-		if (copy_from_user(&ti, argp, sizeof ti))
-			return -EFAULT;
-		if (ti.cdti_trk0 < DiskInfo.first
-		    || ti.cdti_trk0 > DiskInfo.last
-		    || ti.cdti_trk1 < ti.cdti_trk0) {
-			return -EINVAL;
-		}
-		if (ti.cdti_trk1 > DiskInfo.last)
-			ti.cdti_trk1 = DiskInfo.last;
-		azt_Play.start = Toc[ti.cdti_trk0].diskTime;
-		azt_Play.end = Toc[ti.cdti_trk1 + 1].diskTime;
-#ifdef AZT_DEBUG
-		printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
-		       azt_Play.start.min, azt_Play.start.sec,
-		       azt_Play.start.frame, azt_Play.end.min,
-		       azt_Play.end.sec, azt_Play.end.frame);
-#endif
-		i = aztPlay(&azt_Play);
-		if (i < 0) {
-			aztAudioStatus = CDROM_AUDIO_ERROR;
-			return -EIO;
-		}
-		aztAudioStatus = CDROM_AUDIO_PLAY;
-		break;
-	case CDROMPLAYMSF:	/* Play starting at the given MSF address. */
-/*              if (aztAudioStatus == CDROM_AUDIO_PLAY) 
-		{ if (aztSendCmd(ACMD_STOP)) RETURNM("aztcd_ioctl 9",-1);
-		  STEN_LOW;
-		  aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-		}
-*/
-		if (copy_from_user(&msf, argp, sizeof msf))
-			return -EFAULT;
-		/* convert to bcd */
-		azt_bin2bcd(&msf.cdmsf_min0);
-		azt_bin2bcd(&msf.cdmsf_sec0);
-		azt_bin2bcd(&msf.cdmsf_frame0);
-		azt_bin2bcd(&msf.cdmsf_min1);
-		azt_bin2bcd(&msf.cdmsf_sec1);
-		azt_bin2bcd(&msf.cdmsf_frame1);
-		azt_Play.start.min = msf.cdmsf_min0;
-		azt_Play.start.sec = msf.cdmsf_sec0;
-		azt_Play.start.frame = msf.cdmsf_frame0;
-		azt_Play.end.min = msf.cdmsf_min1;
-		azt_Play.end.sec = msf.cdmsf_sec1;
-		azt_Play.end.frame = msf.cdmsf_frame1;
-#ifdef AZT_DEBUG
-		printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
-		       azt_Play.start.min, azt_Play.start.sec,
-		       azt_Play.start.frame, azt_Play.end.min,
-		       azt_Play.end.sec, azt_Play.end.frame);
-#endif
-		i = aztPlay(&azt_Play);
-		if (i < 0) {
-			aztAudioStatus = CDROM_AUDIO_ERROR;
-			return -EIO;
-		}
-		aztAudioStatus = CDROM_AUDIO_PLAY;
-		break;
-
-	case CDROMREADTOCHDR:	/* Read the table of contents header */
-		tocHdr.cdth_trk0 = DiskInfo.first;
-		tocHdr.cdth_trk1 = DiskInfo.last;
-		if (copy_to_user(argp, &tocHdr, sizeof tocHdr))
-			return -EFAULT;
-		break;
-	case CDROMREADTOCENTRY:	/* Read an entry in the table of contents */
-		if (copy_from_user(&entry, argp, sizeof entry))
-			return -EFAULT;
-		if ((!aztTocUpToDate) || aztDiskChanged)
-			aztUpdateToc();
-		if (entry.cdte_track == CDROM_LEADOUT)
-			tocPtr = &Toc[DiskInfo.last + 1];
-		else if (entry.cdte_track > DiskInfo.last
-			 || entry.cdte_track < DiskInfo.first) {
-			return -EINVAL;
-		} else
-			tocPtr = &Toc[entry.cdte_track];
-		entry.cdte_adr = tocPtr->ctrl_addr;
-		entry.cdte_ctrl = tocPtr->ctrl_addr >> 4;
-		if (entry.cdte_format == CDROM_LBA)
-			entry.cdte_addr.lba =
-			    azt_msf2hsg(&tocPtr->diskTime);
-		else if (entry.cdte_format == CDROM_MSF) {
-			entry.cdte_addr.msf.minute =
-			    azt_bcd2bin(tocPtr->diskTime.min);
-			entry.cdte_addr.msf.second =
-			    azt_bcd2bin(tocPtr->diskTime.sec);
-			entry.cdte_addr.msf.frame =
-			    azt_bcd2bin(tocPtr->diskTime.frame);
-		} else {
-			return -EINVAL;
-		}
-		if (copy_to_user(argp, &entry, sizeof entry))
-			return -EFAULT;
-		break;
-	case CDROMSUBCHNL:	/* Get subchannel info */
-		if (copy_from_user
-		    (&subchnl, argp, sizeof(struct cdrom_subchnl)))
-			return -EFAULT;
-		if (aztGetQChannelInfo(&qInfo) < 0) {
-#ifdef AZT_DEBUG
-			printk
-			    ("aztcd: exiting aztcd_ioctl - Error 3 - Command:%x\n",
-			     cmd);
-#endif
-			return -EIO;
-		}
-		subchnl.cdsc_audiostatus = aztAudioStatus;
-		subchnl.cdsc_adr = qInfo.ctrl_addr;
-		subchnl.cdsc_ctrl = qInfo.ctrl_addr >> 4;
-		subchnl.cdsc_trk = azt_bcd2bin(qInfo.track);
-		subchnl.cdsc_ind = azt_bcd2bin(qInfo.pointIndex);
-		if (subchnl.cdsc_format == CDROM_LBA) {
-			subchnl.cdsc_absaddr.lba =
-			    azt_msf2hsg(&qInfo.diskTime);
-			subchnl.cdsc_reladdr.lba =
-			    azt_msf2hsg(&qInfo.trackTime);
-		} else {	/*default */
-			subchnl.cdsc_format = CDROM_MSF;
-			subchnl.cdsc_absaddr.msf.minute =
-			    azt_bcd2bin(qInfo.diskTime.min);
-			subchnl.cdsc_absaddr.msf.second =
-			    azt_bcd2bin(qInfo.diskTime.sec);
-			subchnl.cdsc_absaddr.msf.frame =
-			    azt_bcd2bin(qInfo.diskTime.frame);
-			subchnl.cdsc_reladdr.msf.minute =
-			    azt_bcd2bin(qInfo.trackTime.min);
-			subchnl.cdsc_reladdr.msf.second =
-			    azt_bcd2bin(qInfo.trackTime.sec);
-			subchnl.cdsc_reladdr.msf.frame =
-			    azt_bcd2bin(qInfo.trackTime.frame);
-		}
-		if (copy_to_user(argp, &subchnl, sizeof(struct cdrom_subchnl)))
-			return -EFAULT;
-		break;
-	case CDROMVOLCTRL:	/* Volume control 
-				   * With my Aztech CD268-01A volume control does not work, I can only
-				   turn the channels on (any value !=0) or off (value==0). Maybe it
-				   works better with your drive */
-		if (copy_from_user(&volctrl, argp, sizeof(volctrl)))
-			return -EFAULT;
-		azt_Play.start.min = 0x21;
-		azt_Play.start.sec = 0x84;
-		azt_Play.start.frame = volctrl.channel0;
-		azt_Play.end.min = volctrl.channel1;
-		azt_Play.end.sec = volctrl.channel2;
-		azt_Play.end.frame = volctrl.channel3;
-		sendAztCmd(ACMD_SET_VOLUME, &azt_Play);
-		STEN_LOW_WAIT;
-		break;
-	case CDROMEJECT:
-		aztUnlockDoor();	/* Assume user knows what they're doing */
-		/* all drives can at least stop! */
-		if (aztAudioStatus == CDROM_AUDIO_PLAY) {
-			if (aztSendCmd(ACMD_STOP))
-				RETURNM("azt_ioctl 10", -1);
-			STEN_LOW_WAIT;
-		}
-		if (aztSendCmd(ACMD_EJECT))
-			RETURNM("azt_ioctl 11", -1);
-		STEN_LOW_WAIT;
-		aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-		break;
-	case CDROMEJECT_SW:
-		azt_auto_eject = (char) arg;
-		break;
-	case CDROMRESET:
-		outb(ACMD_SOFT_RESET, CMD_PORT);	/*send reset */
-		STEN_LOW;
-		if (inb(DATA_PORT) != AFL_OP_OK) {	/*OP_OK? */
-			printk
-			    ("aztcd: AZTECH CD-ROM drive does not respond\n");
-		}
-		break;
-/*Take care, the following code is not compatible with other CD-ROM drivers,
-  use it at your own risk with cdplay.c. Set AZT_PRIVATE_IOCTLS to 0 in aztcd.h,
-  if you do not want to use it!
-*/
-#if AZT_PRIVATE_IOCTLS
-	case CDROMREADCOOKED:	/*read data in mode 1 (2048 Bytes) */
-	case CDROMREADRAW:	/*read data in mode 2 (2336 Bytes) */
-		{
-			if (copy_from_user(&msf, argp, sizeof msf))
-				return -EFAULT;
-			/* convert to bcd */
-			azt_bin2bcd(&msf.cdmsf_min0);
-			azt_bin2bcd(&msf.cdmsf_sec0);
-			azt_bin2bcd(&msf.cdmsf_frame0);
-			msf.cdmsf_min1 = 0;
-			msf.cdmsf_sec1 = 0;
-			msf.cdmsf_frame1 = 1;	/*read only one frame */
-			azt_Play.start.min = msf.cdmsf_min0;
-			azt_Play.start.sec = msf.cdmsf_sec0;
-			azt_Play.start.frame = msf.cdmsf_frame0;
-			azt_Play.end.min = msf.cdmsf_min1;
-			azt_Play.end.sec = msf.cdmsf_sec1;
-			azt_Play.end.frame = msf.cdmsf_frame1;
-			if (cmd == CDROMREADRAW) {
-				if (DiskInfo.xa) {
-					return -1;	/*XA Disks can't be read raw */
-				} else {
-					if (sendAztCmd(ACMD_PLAY_READ_RAW, &azt_Play))
-						return -1;
-					DTEN_LOW;
-					insb(DATA_PORT, buf, CD_FRAMESIZE_RAW);
-					if (copy_to_user(argp, &buf, CD_FRAMESIZE_RAW))
-						return -EFAULT;
-				}
-			} else
-				/*CDROMREADCOOKED*/ {
-				if (sendAztCmd(ACMD_PLAY_READ, &azt_Play))
-					return -1;
-				DTEN_LOW;
-				insb(DATA_PORT, buf, CD_FRAMESIZE);
-				if (copy_to_user(argp, &buf, CD_FRAMESIZE))
-					return -EFAULT;
-				}
-		}
-		break;
-	case CDROMSEEK:	/*seek msf address */
-		if (copy_from_user(&msf, argp, sizeof msf))
-			return -EFAULT;
-		/* convert to bcd */
-		azt_bin2bcd(&msf.cdmsf_min0);
-		azt_bin2bcd(&msf.cdmsf_sec0);
-		azt_bin2bcd(&msf.cdmsf_frame0);
-		azt_Play.start.min = msf.cdmsf_min0;
-		azt_Play.start.sec = msf.cdmsf_sec0;
-		azt_Play.start.frame = msf.cdmsf_frame0;
-		if (aztSeek(&azt_Play))
-			return -1;
-		break;
-#endif				/*end of incompatible code */
-	case CDROMREADMODE1:	/*set read data in mode 1 */
-		return aztSetDiskType(AZT_MODE_1);
-	case CDROMREADMODE2:	/*set read data in mode 2 */
-		return aztSetDiskType(AZT_MODE_2);
-	default:
-		return -EINVAL;
-	}
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztcd_ioctl Command:%x  Time:%li\n", cmd,
-	       jiffies);
-#endif
-	return 0;
-}
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-static void azt_transfer(void)
-{
-#ifdef AZT_TEST
-	printk("aztcd: executing azt_transfer Time:%li\n", jiffies);
-#endif
-	if (!current_valid())
-	        return;
-
-	while (CURRENT->nr_sectors) {
-		int bn = CURRENT->sector / 4;
-		int i;
-		for (i = 0; i < AZT_BUF_SIZ && azt_buf_bn[i] != bn; ++i);
-		if (i < AZT_BUF_SIZ) {
-			int offs = (i * 4 + (CURRENT->sector & 3)) * 512;
-			int nr_sectors = 4 - (CURRENT->sector & 3);
-			if (azt_buf_out != i) {
-				azt_buf_out = i;
-				if (azt_buf_bn[i] != bn) {
-					azt_buf_out = -1;
-					continue;
-				}
-			}
-			if (nr_sectors > CURRENT->nr_sectors)
-			    nr_sectors = CURRENT->nr_sectors;
-			memcpy(CURRENT->buffer, azt_buf + offs,
-				nr_sectors * 512);
-			CURRENT->nr_sectors -= nr_sectors;
-			CURRENT->sector += nr_sectors;
-			CURRENT->buffer += nr_sectors * 512;
-		} else {
-			azt_buf_out = -1;
-			break;
-		}
-	}
-}
-
-static void do_aztcd_request(request_queue_t * q)
-{
-#ifdef AZT_TEST
-	printk(" do_aztcd_request(%ld+%ld) Time:%li\n", CURRENT->sector,
-	       CURRENT->nr_sectors, jiffies);
-#endif
-	if (DiskInfo.audio) {
-		printk("aztcd: Error, tried to mount an Audio CD\n");
-		end_request(CURRENT, 0);
-		return;
-	}
-	azt_transfer_is_active = 1;
-	while (current_valid()) {
-		azt_transfer();
-		if (CURRENT->nr_sectors == 0) {
-			end_request(CURRENT, 1);
-		} else {
-			azt_buf_out = -1;	/* Want to read a block not in buffer */
-			if (azt_state == AZT_S_IDLE) {
-				if ((!aztTocUpToDate) || aztDiskChanged) {
-					if (aztUpdateToc() < 0) {
-						while (current_valid())
-							end_request(CURRENT, 0);
-						break;
-					}
-				}
-				azt_state = AZT_S_START;
-				AztTries = 5;
-				SET_TIMER(azt_poll, HZ / 100);
-			}
-			break;
-		}
-	}
-	azt_transfer_is_active = 0;
-#ifdef AZT_TEST2
-	printk
-	    ("azt_next_bn:%x  azt_buf_in:%x azt_buf_out:%x  azt_buf_bn:%x\n",
-	     azt_next_bn, azt_buf_in, azt_buf_out, azt_buf_bn[azt_buf_in]);
-	printk(" do_aztcd_request ends  Time:%li\n", jiffies);
-#endif
-}
-
-
-static void azt_invalidate_buffers(void)
-{
-	int i;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: executing azt_invalidate_buffers\n");
-#endif
-	for (i = 0; i < AZT_BUF_SIZ; ++i)
-		azt_buf_bn[i] = -1;
-	azt_buf_out = -1;
-}
-
-/*
- * Open the device special file.  Check that a disk is in.
- */
-static int aztcd_open(struct inode *ip, struct file *fp)
-{
-	int st;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztcd_open\n");
-#endif
-
-	if (aztPresent == 0)
-		return -ENXIO;	/* no hardware */
-
-	if (!azt_open_count && azt_state == AZT_S_IDLE) {
-		azt_invalidate_buffers();
-
-		st = getAztStatus();	/* check drive status */
-		if (st == -1)
-			goto err_out;	/* drive doesn't respond */
-
-		if (st & AST_DOOR_OPEN) {	/* close door, then get the status again. */
-			printk("aztcd: Door Open?\n");
-			aztCloseDoor();
-			st = getAztStatus();
-		}
-
-		if ((st & AST_NOT_READY) || (st & AST_DSK_CHG)) {	/*no disk in drive or changed */
-			printk
-			    ("aztcd: Disk Changed or No Disk in Drive?\n");
-			aztTocUpToDate = 0;
-		}
-		if (aztUpdateToc())
-			goto err_out;
-
-	}
-	++azt_open_count;
-	aztLockDoor();
-
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztcd_open\n");
-#endif
-	return 0;
-
-      err_out:
-	return -EIO;
-}
-
-
-/*
- * On close, we flush all azt blocks from the buffer cache.
- */
-static int aztcd_release(struct inode *inode, struct file *file)
-{
-#ifdef AZT_DEBUG
-	printk("aztcd: executing aztcd_release\n");
-	printk("inode: %p, device: %s    file: %p\n", inode,
-	       inode->i_bdev->bd_disk->disk_name, file);
-#endif
-	if (!--azt_open_count) {
-		azt_invalidate_buffers();
-		aztUnlockDoor();
-		if (azt_auto_eject)
-			aztSendCmd(ACMD_EJECT);
-		CLEAR_TIMER;
-	}
-	return 0;
-}
-
-static struct gendisk *azt_disk;
-
-/*
- * Test for presence of drive and initialize it.  Called at boot time.
- */
-
-static int __init aztcd_init(void)
-{
-	long int count, max_count;
-	unsigned char result[50];
-	int st;
-	void* status = NULL;
-	int i = 0;
-	int ret = 0;
-
-	if (azt_port == 0) {
-		printk(KERN_INFO "aztcd: no Aztech CD-ROM Initialization");
-		return -EIO;
-	}
-
-	printk(KERN_INFO "aztcd: AZTECH, ORCHID, OKANO, WEARNES, TXC, CyDROM "
-	       "CD-ROM Driver\n");
-	printk(KERN_INFO "aztcd: (C) 1994-98 W.Zimmermann\n");
-	if (azt_port == -1) {
-		printk
-		    ("aztcd: DriverVersion=%s For IDE/ATAPI-drives use ide-cd.c\n",
-		     AZT_VERSION);
-	} else
-		printk
-		    ("aztcd: DriverVersion=%s BaseAddress=0x%x  For IDE/ATAPI-drives use ide-cd.c\n",
-		     AZT_VERSION, azt_port);
-	printk(KERN_INFO "aztcd: If you have problems, read /usr/src/linux/"
-	       "Documentation/cdrom/aztcd\n");
-
-
-#ifdef AZT_SW32			/*CDROM connected to Soundwave32 card */
-	if ((0xFF00 & inw(AZT_SW32_ID_REG)) != 0x4500) {
-		printk
-		    ("aztcd: no Soundwave32 card detected at base:%x init:%x config:%x id:%x\n",
-		     AZT_SW32_BASE_ADDR, AZT_SW32_INIT,
-		     AZT_SW32_CONFIG_REG, AZT_SW32_ID_REG);
-		return -EIO;
-	} else {
-		printk(KERN_INFO
-		       "aztcd: Soundwave32 card detected at %x  Version %x\n",
-		       AZT_SW32_BASE_ADDR, inw(AZT_SW32_ID_REG));
-		outw(AZT_SW32_INIT, AZT_SW32_CONFIG_REG);
-		for (count = 0; count < 10000; count++);	/*delay a bit */
-	}
-#endif
-
-	/* check for presence of drive */
-
-	if (azt_port == -1) {	/* autoprobing for proprietary interface  */
-		for (i = 0; (azt_port_auto[i] != 0) && (i < 16); i++) {
-			azt_port = azt_port_auto[i];
-			printk(KERN_INFO "aztcd: Autoprobing BaseAddress=0x%x"
-			       "\n", azt_port);
-			 /*proprietary interfaces need 4 bytes */
-			if (!request_region(azt_port, 4, "aztcd")) {
-				continue;
-			}
-			outb(POLLED, MODE_PORT);
-			inb(CMD_PORT);
-			inb(CMD_PORT);
-			outb(ACMD_GET_VERSION, CMD_PORT);	/*Try to get version info */
-
-			aztTimeOutCount = 0;
-			do {
-				aztIndatum = inb(STATUS_PORT);
-				aztTimeOutCount++;
-				if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
-					break;
-			} while (aztIndatum & AFL_STATUS);
-			if (inb(DATA_PORT) == AFL_OP_OK) { /* OK drive found */
-				break;
-			}
-			else {  /* Drive not found on this port - try next one */
-				release_region(azt_port, 4);
-			}
-		}
-		if ((i == 16) || (azt_port_auto[i] == 0)) {
-			printk(KERN_INFO "aztcd: no AZTECH CD-ROM drive found\n");
-			return -EIO;
-		}
-	} else {		/* no autoprobing */
-		if ((azt_port == 0x1f0) || (azt_port == 0x170))
-			status = request_region(azt_port, 8, "aztcd");	/*IDE-interfaces need 8 bytes */
-		else
-			status = request_region(azt_port, 4, "aztcd");	/*proprietary interfaces need 4 bytes */
-		if (!status) {
-			printk(KERN_WARNING "aztcd: conflict, I/O port (%X) "
-			       "already used\n", azt_port);
-			return -EIO;
-		}
-
-		if ((azt_port == 0x1f0) || (azt_port == 0x170))
-			SWITCH_IDE_SLAVE;	/*switch IDE interface to slave configuration */
-
-		outb(POLLED, MODE_PORT);
-		inb(CMD_PORT);
-		inb(CMD_PORT);
-		outb(ACMD_GET_VERSION, CMD_PORT);	/*Try to get version info */
-
-		aztTimeOutCount = 0;
-		do {
-			aztIndatum = inb(STATUS_PORT);
-			aztTimeOutCount++;
-			if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
-				break;
-		} while (aztIndatum & AFL_STATUS);
-
-		if (inb(DATA_PORT) != AFL_OP_OK) {	/*OP_OK? If not, reset and try again */
-#ifndef MODULE
-			if (azt_cont != 0x79) {
-				printk(KERN_WARNING "aztcd: no AZTECH CD-ROM "
-				       "drive found-Try boot parameter aztcd="
-				       "<BaseAddress>,0x79\n");
-				ret = -EIO;
-				goto err_out;
-			}
-#else
-			if (0) {
-			}
-#endif
-			else {
-				printk(KERN_INFO "aztcd: drive reset - "
-				       "please wait\n");
-				for (count = 0; count < 50; count++) {
-					inb(STATUS_PORT);	/*removing all data from earlier tries */
-					inb(DATA_PORT);
-				}
-				outb(POLLED, MODE_PORT);
-				inb(CMD_PORT);
-				inb(CMD_PORT);
-				getAztStatus();	/*trap errors */
-				outb(ACMD_SOFT_RESET, CMD_PORT);	/*send reset */
-				STEN_LOW;
-				if (inb(DATA_PORT) != AFL_OP_OK) {	/*OP_OK? */
-					printk(KERN_WARNING "aztcd: no AZTECH "
-					       "CD-ROM drive found\n");
-					ret = -EIO;
-					goto err_out;
-				}
-
-				for (count = 0; count < AZT_TIMEOUT;
-				     count++)
-					barrier();	/* Stop gcc 2.96 being smart */
-				/* use udelay(), damnit -- AV */
-
-				if ((st = getAztStatus()) == -1) {
-					printk(KERN_WARNING "aztcd: Drive Status"
-					       " Error Status=%x\n", st);
-					ret = -EIO;
-					goto err_out;
-				}
-#ifdef AZT_DEBUG
-				printk(KERN_DEBUG "aztcd: Status = %x\n", st);
-#endif
-				outb(POLLED, MODE_PORT);
-				inb(CMD_PORT);
-				inb(CMD_PORT);
-				outb(ACMD_GET_VERSION, CMD_PORT);	/*GetVersion */
-				STEN_LOW;
-				OP_OK;
-			}
-		}
-	}
-
-	azt_init_end = 1;
-	STEN_LOW;
-	result[0] = inb(DATA_PORT);	/*reading in a null byte??? */
-	for (count = 1; count < 50; count++) {	/*Reading version string */
-		aztTimeOutCount = 0;	/*here we must implement STEN_LOW differently */
-		do {
-			aztIndatum = inb(STATUS_PORT);	/*because we want to exit by timeout */
-			aztTimeOutCount++;
-			if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
-				break;
-		} while (aztIndatum & AFL_STATUS);
-		if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
-			break;	/*all chars read? */
-		result[count] = inb(DATA_PORT);
-	}
-	if (count > 30)
-		max_count = 30;	/*print max.30 chars of the version string */
-	else
-		max_count = count;
-	printk(KERN_INFO "aztcd: FirmwareVersion=");
-	for (count = 1; count < max_count; count++)
-		printk("%c", result[count]);
-	printk("<<>> ");
-
-	if ((result[1] == 'A') && (result[2] == 'Z') && (result[3] == 'T')) {
-		printk("AZTECH drive detected\n");
-	/*AZTECH*/}
-		else if ((result[2] == 'C') && (result[3] == 'D')
-			 && (result[4] == 'D')) {
-		printk("ORCHID or WEARNES drive detected\n");	/*ORCHID or WEARNES */
-	} else if ((result[1] == 0x03) && (result[2] == '5')) {
-		printk("TXC or CyCDROM drive detected\n");	/*Conrad TXC, CyCDROM */
-	} else {		/*OTHERS or none */
-		printk("\nunknown drive or firmware version detected\n");
-		printk
-		    ("aztcd may not run stable, if you want to try anyhow,\n");
-		printk("boot with: aztcd=<BaseAddress>,0x79\n");
-		if ((azt_cont != 0x79)) {
-			printk("aztcd: FirmwareVersion=");
-			for (count = 1; count < 5; count++)
-				printk("%c", result[count]);
-			printk("<<>> ");
-			printk("Aborted\n");
-			ret = -EIO;
-			goto err_out;
-		}
-	}
-	azt_disk = alloc_disk(1);
-	if (!azt_disk)
-		goto err_out;
-
-	if (register_blkdev(MAJOR_NR, "aztcd")) {
-		ret = -EIO;
-		goto err_out2;
-	}
-
-	azt_queue = blk_init_queue(do_aztcd_request, &aztSpin);
-	if (!azt_queue) {
-		ret = -ENOMEM;
-		goto err_out3;
-	}
-
-	blk_queue_hardsect_size(azt_queue, 2048);
-	azt_disk->major = MAJOR_NR;
-	azt_disk->first_minor = 0;
-	azt_disk->fops = &azt_fops;
-	sprintf(azt_disk->disk_name, "aztcd");
-	azt_disk->queue = azt_queue;
-	add_disk(azt_disk);
-	azt_invalidate_buffers();
-	aztPresent = 1;
-	aztCloseDoor();
-	return 0;
-err_out3:
-	unregister_blkdev(MAJOR_NR, "aztcd");
-err_out2:
-	put_disk(azt_disk);
-err_out:
-	if ((azt_port == 0x1f0) || (azt_port == 0x170)) {
-		SWITCH_IDE_MASTER;
-		release_region(azt_port, 8);	/*IDE-interface */
-	} else
-		release_region(azt_port, 4);	/*proprietary interface */
-	return ret;
-
-}
-
-static void __exit aztcd_exit(void)
-{
-	del_gendisk(azt_disk);
-	put_disk(azt_disk);
-	if ((unregister_blkdev(MAJOR_NR, "aztcd") == -EINVAL)) {
-		printk("What's that: can't unregister aztcd\n");
-		return;
-	}
-	blk_cleanup_queue(azt_queue);
-	if ((azt_port == 0x1f0) || (azt_port == 0x170)) {
-		SWITCH_IDE_MASTER;
-		release_region(azt_port, 8);	/*IDE-interface */
-	} else
-		release_region(azt_port, 4);	/*proprietary interface */
-	printk(KERN_INFO "aztcd module released.\n");
-}
-
-module_init(aztcd_init);
-module_exit(aztcd_exit);
-
-/*##########################################################################
-  Aztcd State Machine: Controls Drive Operating State
-  ##########################################################################
-*/
-static void azt_poll(void)
-{
-	int st = 0;
-	int loop_ctl = 1;
-	int skip = 0;
-
-	if (azt_error) {
-		if (aztSendCmd(ACMD_GET_ERROR))
-			RETURN("azt_poll 1");
-		STEN_LOW;
-		azt_error = inb(DATA_PORT) & 0xFF;
-		printk("aztcd: I/O error 0x%02x\n", azt_error);
-		azt_invalidate_buffers();
-#ifdef WARN_IF_READ_FAILURE
-		if (AztTries == 5)
-			printk
-			    ("aztcd: Read of Block %d Failed - Maybe Audio Disk?\n",
-			     azt_next_bn);
-#endif
-		if (!AztTries--) {
-			printk
-			    ("aztcd: Read of Block %d Failed, Maybe Audio Disk? Giving up\n",
-			     azt_next_bn);
-			if (azt_transfer_is_active) {
-				AztTries = 0;
-				loop_ctl = 0;
-			}
-			if (current_valid())
-				end_request(CURRENT, 0);
-			AztTries = 5;
-		}
-		azt_error = 0;
-		azt_state = AZT_S_STOP;
-	}
-
-	while (loop_ctl) {
-		loop_ctl = 0;	/* each case must flip this back to 1 if we want
-				   to come back up here */
-		switch (azt_state) {
-
-		case AZT_S_IDLE:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_IDLE\n");
-			}
-#endif
-			return;
-
-		case AZT_S_START:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_START\n");
-			}
-#endif
-			if (aztSendCmd(ACMD_GET_STATUS))
-				RETURN("azt_poll 2");	/*result will be checked by aztStatus() */
-			azt_state =
-			    azt_mode == 1 ? AZT_S_READ : AZT_S_MODE;
-			AztTimeout = 3000;
-			break;
-
-		case AZT_S_MODE:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_MODE\n");
-			}
-#endif
-			if (!skip) {
-				if ((st = aztStatus()) != -1) {
-					if ((st & AST_DSK_CHG)
-					    || (st & AST_NOT_READY)) {
-						aztDiskChanged = 1;
-						aztTocUpToDate = 0;
-						azt_invalidate_buffers();
-						end_request(CURRENT, 0);
-						printk
-						    ("aztcd: Disk Changed or Not Ready 1 - Unmount Disk!\n");
-					}
-				} else
-					break;
-			}
-			skip = 0;
-
-			if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) {
-				aztDiskChanged = 1;
-				aztTocUpToDate = 0;
-				printk
-				    ("aztcd: Disk Changed or Not Ready 2 - Unmount Disk!\n");
-				end_request(CURRENT, 0);
-				printk((st & AST_DOOR_OPEN) ?
-				       "aztcd: door open\n" :
-				       "aztcd: disk removed\n");
-				if (azt_transfer_is_active) {
-					azt_state = AZT_S_START;
-					loop_ctl = 1;	/* goto immediately */
-					break;
-				}
-				azt_state = AZT_S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-
-/*	  if (aztSendCmd(ACMD_SET_MODE)) RETURN("azt_poll 3");
-	  outb(0x01, DATA_PORT);
-	  PA_OK;
-	  STEN_LOW;
-*/
-			if (aztSendCmd(ACMD_GET_STATUS))
-				RETURN("azt_poll 4");
-			STEN_LOW;
-			azt_mode = 1;
-			azt_state = AZT_S_READ;
-			AztTimeout = 3000;
-
-			break;
-
-
-		case AZT_S_READ:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_READ\n");
-			}
-#endif
-			if (!skip) {
-				if ((st = aztStatus()) != -1) {
-					if ((st & AST_DSK_CHG)
-					    || (st & AST_NOT_READY)) {
-						aztDiskChanged = 1;
-						aztTocUpToDate = 0;
-						azt_invalidate_buffers();
-						printk
-						    ("aztcd: Disk Changed or Not Ready 3 - Unmount Disk!\n");
-						end_request(CURRENT, 0);
-					}
-				} else
-					break;
-			}
-
-			skip = 0;
-			if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) {
-				aztDiskChanged = 1;
-				aztTocUpToDate = 0;
-				printk((st & AST_DOOR_OPEN) ?
-				       "aztcd: door open\n" :
-				       "aztcd: disk removed\n");
-				if (azt_transfer_is_active) {
-					azt_state = AZT_S_START;
-					loop_ctl = 1;
-					break;
-				}
-				azt_state = AZT_S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-
-			if (current_valid()) {
-				struct azt_Play_msf msf;
-				int i;
-				azt_next_bn = CURRENT->sector / 4;
-				azt_hsg2msf(azt_next_bn, &msf.start);
-				i = 0;
-				/* find out in which track we are */
-				while (azt_msf2hsg(&msf.start) >
-				       azt_msf2hsg(&Toc[++i].trackTime)) {
-				};
-				if (azt_msf2hsg(&msf.start) <
-				    azt_msf2hsg(&Toc[i].trackTime) -
-				    AZT_BUF_SIZ) {
-					azt_read_count = AZT_BUF_SIZ;	/*fast, because we read ahead */
-					/*azt_read_count=CURRENT->nr_sectors;    slow, no read ahead */
-				} else	/* don't read beyond end of track */
-#if AZT_MULTISESSION
-				{
-					azt_read_count =
-					    (azt_msf2hsg(&Toc[i].trackTime)
-					     / 4) * 4 -
-					    azt_msf2hsg(&msf.start);
-					if (azt_read_count < 0)
-						azt_read_count = 0;
-					if (azt_read_count > AZT_BUF_SIZ)
-						azt_read_count =
-						    AZT_BUF_SIZ;
-					printk
-					    ("aztcd: warning - trying to read beyond end of track\n");
-/*               printk("%i %i %li %li\n",i,azt_read_count,azt_msf2hsg(&msf.start),azt_msf2hsg(&Toc[i].trackTime));
-*/ }
-#else
-				{
-					azt_read_count = AZT_BUF_SIZ;
-				}
-#endif
-				msf.end.min = 0;
-				msf.end.sec = 0;
-				msf.end.frame = azt_read_count;	/*Mitsumi here reads 0xffffff sectors */
-#ifdef AZT_TEST3
-				printk
-				    ("---reading msf-address %x:%x:%x  %x:%x:%x\n",
-				     msf.start.min, msf.start.sec,
-				     msf.start.frame, msf.end.min,
-				     msf.end.sec, msf.end.frame);
-				printk
-				    ("azt_next_bn:%x  azt_buf_in:%x azt_buf_out:%x  azt_buf_bn:%x\n",
-				     azt_next_bn, azt_buf_in, azt_buf_out,
-				     azt_buf_bn[azt_buf_in]);
-#endif
-				if (azt_read_mode == AZT_MODE_2) {
-					sendAztCmd(ACMD_PLAY_READ_RAW, &msf);	/*XA disks in raw mode */
-				} else {
-					sendAztCmd(ACMD_PLAY_READ, &msf);	/*others in cooked mode */
-				}
-				azt_state = AZT_S_DATA;
-				AztTimeout = READ_TIMEOUT;
-			} else {
-				azt_state = AZT_S_STOP;
-				loop_ctl = 1;
-				break;
-			}
-
-			break;
-
-
-		case AZT_S_DATA:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_DATA\n");
-			}
-#endif
-
-			st = inb(STATUS_PORT) & AFL_STATUSorDATA;
-
-			switch (st) {
-
-			case AFL_DATA:
-#ifdef AZT_TEST3
-				if (st != azt_st_old) {
-					azt_st_old = st;
-					printk("---AFL_DATA st:%x\n", st);
-				}
-#endif
-				if (!AztTries--) {
-					printk
-					    ("aztcd: Read of Block %d Failed, Maybe Audio Disk ? Giving up\n",
-					     azt_next_bn);
-					if (azt_transfer_is_active) {
-						AztTries = 0;
-						break;
-					}
-					if (current_valid())
-						end_request(CURRENT, 0);
-					AztTries = 5;
-				}
-				azt_state = AZT_S_START;
-				AztTimeout = READ_TIMEOUT;
-				loop_ctl = 1;
-				break;
-
-			case AFL_STATUSorDATA:
-#ifdef AZT_TEST3
-				if (st != azt_st_old) {
-					azt_st_old = st;
-					printk
-					    ("---AFL_STATUSorDATA st:%x\n",
-					     st);
-				}
-#endif
-				break;
-
-			default:
-#ifdef AZT_TEST3
-				if (st != azt_st_old) {
-					azt_st_old = st;
-					printk("---default: st:%x\n", st);
-				}
-#endif
-				AztTries = 5;
-				if (!current_valid() && azt_buf_in == azt_buf_out) {
-					azt_state = AZT_S_STOP;
-					loop_ctl = 1;
-					break;
-				}
-				if (azt_read_count <= 0)
-					printk
-					    ("aztcd: warning - try to read 0 frames\n");
-				while (azt_read_count) {	/*??? fast read ahead loop */
-					azt_buf_bn[azt_buf_in] = -1;
-					DTEN_LOW;	/*??? unsolved problem, very
-							   seldom we get timeouts
-							   here, don't now the real
-							   reason. With my drive this
-							   sometimes also happens with
-							   Aztech's original driver under
-							   DOS. Is it a hardware bug? 
-							   I tried to recover from such
-							   situations here. Zimmermann */
-					if (aztTimeOutCount >= AZT_TIMEOUT) {
-						printk
-						    ("read_count:%d CURRENT->nr_sectors:%ld azt_buf_in:%d\n",
-						     azt_read_count,
-						     CURRENT->nr_sectors,
-						     azt_buf_in);
-						printk
-						    ("azt_transfer_is_active:%x\n",
-						     azt_transfer_is_active);
-						azt_read_count = 0;
-						azt_state = AZT_S_STOP;
-						loop_ctl = 1;
-						end_request(CURRENT, 1);	/*should we have here (1) or (0)? */
-					} else {
-						if (azt_read_mode ==
-						    AZT_MODE_2) {
-							insb(DATA_PORT,
-							     azt_buf +
-							     CD_FRAMESIZE_RAW
-							     * azt_buf_in,
-							     CD_FRAMESIZE_RAW);
-						} else {
-							insb(DATA_PORT,
-							     azt_buf +
-							     CD_FRAMESIZE *
-							     azt_buf_in,
-							     CD_FRAMESIZE);
-						}
-						azt_read_count--;
-#ifdef AZT_TEST3
-						printk
-						    ("AZT_S_DATA; ---I've read data- read_count: %d\n",
-						     azt_read_count);
-						printk
-						    ("azt_next_bn:%d  azt_buf_in:%d azt_buf_out:%d  azt_buf_bn:%d\n",
-						     azt_next_bn,
-						     azt_buf_in,
-						     azt_buf_out,
-						     azt_buf_bn
-						     [azt_buf_in]);
-#endif
-						azt_buf_bn[azt_buf_in] =
-						    azt_next_bn++;
-						if (azt_buf_out == -1)
-							azt_buf_out =
-							    azt_buf_in;
-						azt_buf_in =
-						    azt_buf_in + 1 ==
-						    AZT_BUF_SIZ ? 0 :
-						    azt_buf_in + 1;
-					}
-				}
-				if (!azt_transfer_is_active) {
-					while (current_valid()) {
-						azt_transfer();
-						if (CURRENT->nr_sectors ==
-						    0)
-							end_request(CURRENT, 1);
-						else
-							break;
-					}
-				}
-
-				if (current_valid()
-				    && (CURRENT->sector / 4 < azt_next_bn
-					|| CURRENT->sector / 4 >
-					azt_next_bn + AZT_BUF_SIZ)) {
-					azt_state = AZT_S_STOP;
-					loop_ctl = 1;
-					break;
-				}
-				AztTimeout = READ_TIMEOUT;
-				if (azt_read_count == 0) {
-					azt_state = AZT_S_STOP;
-					loop_ctl = 1;
-					break;
-				}
-				break;
-			}
-			break;
-
-
-		case AZT_S_STOP:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_STOP\n");
-			}
-#endif
-			if (azt_read_count != 0)
-				printk("aztcd: discard data=%x frames\n",
-				       azt_read_count);
-			while (azt_read_count != 0) {
-				int i;
-				if (!(inb(STATUS_PORT) & AFL_DATA)) {
-					if (azt_read_mode == AZT_MODE_2)
-						for (i = 0;
-						     i < CD_FRAMESIZE_RAW;
-						     i++)
-							inb(DATA_PORT);
-					else
-						for (i = 0;
-						     i < CD_FRAMESIZE; i++)
-							inb(DATA_PORT);
-				}
-				azt_read_count--;
-			}
-			if (aztSendCmd(ACMD_GET_STATUS))
-				RETURN("azt_poll 5");
-			azt_state = AZT_S_STOPPING;
-			AztTimeout = 1000;
-			break;
-
-		case AZT_S_STOPPING:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_STOPPING\n");
-			}
-#endif
-
-			if ((st = aztStatus()) == -1 && AztTimeout)
-				break;
-
-			if ((st != -1)
-			    && ((st & AST_DSK_CHG)
-				|| (st & AST_NOT_READY))) {
-				aztDiskChanged = 1;
-				aztTocUpToDate = 0;
-				azt_invalidate_buffers();
-				printk
-				    ("aztcd: Disk Changed or Not Ready 4 - Unmount Disk!\n");
-				end_request(CURRENT, 0);
-			}
-
-#ifdef AZT_TEST3
-			printk("CURRENT_VALID %d azt_mode %d\n",
-			       current_valid(), azt_mode);
-#endif
-
-			if (current_valid()) {
-				if (st != -1) {
-					if (azt_mode == 1) {
-						azt_state = AZT_S_READ;
-						loop_ctl = 1;
-						skip = 1;
-						break;
-					} else {
-						azt_state = AZT_S_MODE;
-						loop_ctl = 1;
-						skip = 1;
-						break;
-					}
-				} else {
-					azt_state = AZT_S_START;
-					AztTimeout = 1;
-				}
-			} else {
-				azt_state = AZT_S_IDLE;
-				return;
-			}
-			break;
-
-		default:
-			printk("aztcd: invalid state %d\n", azt_state);
-			return;
-		}		/* case */
-	}			/* while */
-
-
-	if (!AztTimeout--) {
-		printk("aztcd: timeout in state %d\n", azt_state);
-		azt_state = AZT_S_STOP;
-		if (aztSendCmd(ACMD_STOP))
-			RETURN("azt_poll 6");
-		STEN_LOW_WAIT;
-	};
-
-	SET_TIMER(azt_poll, HZ / 100);
-}
-
-
-/*###########################################################################
- * Miscellaneous support functions
-  ###########################################################################
-*/
-static void azt_hsg2msf(long hsg, struct msf *msf)
-{
-	hsg += 150;
-	msf->min = hsg / 4500;
-	hsg %= 4500;
-	msf->sec = hsg / 75;
-	msf->frame = hsg % 75;
-#ifdef AZT_DEBUG
-	if (msf->min >= 70)
-		printk("aztcd: Error hsg2msf address Minutes\n");
-	if (msf->sec >= 60)
-		printk("aztcd: Error hsg2msf address Seconds\n");
-	if (msf->frame >= 75)
-		printk("aztcd: Error hsg2msf address Frames\n");
-#endif
-	azt_bin2bcd(&msf->min);	/* convert to BCD */
-	azt_bin2bcd(&msf->sec);
-	azt_bin2bcd(&msf->frame);
-}
-
-static long azt_msf2hsg(struct msf *mp)
-{
-	return azt_bcd2bin(mp->frame) + azt_bcd2bin(mp->sec) * 75
-	    + azt_bcd2bin(mp->min) * 4500 - CD_MSF_OFFSET;
-}
-
-static void azt_bin2bcd(unsigned char *p)
-{
-	int u, t;
-
-	u = *p % 10;
-	t = *p / 10;
-	*p = u | (t << 4);
-}
-
-static int azt_bcd2bin(unsigned char bcd)
-{
-	return (bcd >> 4) * 10 + (bcd & 0xF);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(AZTECH_CDROM_MAJOR);
diff --git a/drivers/cdrom/aztcd.h b/drivers/cdrom/aztcd.h
deleted file mode 100644
index 057501e31628..000000000000
--- a/drivers/cdrom/aztcd.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* $Id: aztcd.h,v 2.60 1997/11/29 09:51:22 root Exp root $
- *
- * Definitions for a AztechCD268 CD-ROM interface
- *	Copyright (C) 1994-98  Werner Zimmermann
- *
- *	based on Mitsumi CDROM driver by Martin Harriss
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History:	W.Zimmermann adaption to Aztech CD268-01A Version 1.3
- *		October 1994 Email: Werner.Zimmermann@fht-esslingen.de
- */
-
-/* *** change this to set the I/O port address of your CD-ROM drive,
-       set to '-1', if you want autoprobing */
-#define AZT_BASE_ADDR		-1
-
-/* list of autoprobing addresses (not more than 15), last value must be 0x000
-   Note: Autoprobing is only enabled, if AZT_BASE_ADDR is set to '-1' ! */
-#define AZT_BASE_AUTO 		{ 0x320, 0x300, 0x310, 0x330, 0x000 }
-
-/* Uncomment this, if your CDROM is connected to a Soundwave32-soundcard
-   and configure AZT_BASE_ADDR and AZT_SW32_BASE_ADDR */
-/*#define AZT_SW32 1
-*/
-
-#ifdef AZT_SW32 
-#define AZT_SW32_BASE_ADDR      0x220  /*I/O port base address of your soundcard*/
-#endif
-
-/* Set this to 1, if you want your tray to be locked, set to 0 to prevent tray 
-   from locking */
-#define AZT_ALLOW_TRAY_LOCK	1
-
-/*Set this to 1 to allow auto-eject when unmounting a disk, set to 0, if you 
-  don't want the auto-eject feature*/
-#define AZT_AUTO_EJECT          0
-
-/*Set this to 1, if you want to use incompatible ioctls for reading in raw and
-  cooked mode */
-#define AZT_PRIVATE_IOCTLS      1
-
-/*Set this to 1, if you want multisession support by the ISO fs. Even if you set 
-  this value to '0' you can use multisession CDs. In that case the drive's firm-
-  ware will do the appropriate redirection automatically. The CD will then look
-  like a single session CD (but nevertheless all data may be read). Please read 
-  chapter '5.1 Multisession support' in README.aztcd for details. Normally it's 
-  uncritical to leave this setting untouched */
-#define AZT_MULTISESSION        1
-
-/*Uncomment this, if you are using a linux kernel version prior to 2.1.0 */
-/*#define AZT_KERNEL_PRIOR_2_1 */
-
-/*---------------------------------------------------------------------------*/
-/*-----nothing to be configured for normal applications below this line------*/
-
-
-/* Increase this if you get lots of timeouts; if you get kernel panic, replace
-   STEN_LOW_WAIT by STEN_LOW in the source code */
-#define AZT_STATUS_DELAY	400       /*for timer wait, STEN_LOW_WAIT*/
-#define AZT_TIMEOUT		8000000   /*for busy wait STEN_LOW, DTEN_LOW*/
-#define AZT_FAST_TIMEOUT	10000     /*for reading the version string*/
-
-/* number of times to retry a command before giving up */
-#define AZT_RETRY_ATTEMPTS	3
-
-/* port access macros */
-#define CMD_PORT		azt_port
-#define DATA_PORT		azt_port
-#define STATUS_PORT		azt_port+1
-#define MODE_PORT		azt_port+2
-#ifdef  AZT_SW32                
- #define AZT_SW32_INIT          (unsigned int) (0xFF00 & (AZT_BASE_ADDR*16))
- #define AZT_SW32_CONFIG_REG    AZT_SW32_BASE_ADDR+0x16  /*Soundwave32 Config. Register*/
- #define AZT_SW32_ID_REG        AZT_SW32_BASE_ADDR+0x04  /*Soundwave32 ID Version Register*/
-#endif
-
-/* status bits */
-#define AST_CMD_CHECK		0x80		/* 1 = command error */
-#define AST_DOOR_OPEN		0x40		/* 1 = door is open */
-#define AST_NOT_READY		0x20		/* 1 = no disk in the drive */
-#define AST_DSK_CHG		0x02		/* 1 = disk removed or changed */
-#define AST_MODE                0x01            /* 0=MODE1, 1=MODE2 */
-#define AST_MODE_BITS		0x1C		/* Mode Bits */
-#define AST_INITIAL		0x0C		/* initial, only valid ... */
-#define AST_BUSY		0x04		/* now playing, only valid
-						   in combination with mode
-						   bits */
-/* flag bits */
-#define AFL_DATA		0x02		/* data available if low */
-#define AFL_STATUS		0x04		/* status available if low */
-#define AFL_OP_OK		0x01		/* OP_OK command correct*/
-#define AFL_PA_OK		0x02		/* PA_OK parameter correct*/
-#define AFL_OP_ERR		0x05		/* error in command*/
-#define AFL_PA_ERR		0x06		/* error in parameters*/
-#define POLLED			0x04		/* polled mode */
-
-/* commands */
-#define ACMD_SOFT_RESET		0x10		/* reset drive */
-#define ACMD_PLAY_READ		0x20		/* read data track in cooked mode */
-#define ACMD_PLAY_READ_RAW      0x21		/* reading in raw mode*/
-#define ACMD_SEEK               0x30            /* seek msf address*/
-#define ACMD_SEEK_TO_LEADIN     0x31		/* seek to leadin track*/
-#define ACMD_GET_ERROR		0x40		/* get error code */
-#define ACMD_GET_STATUS		0x41		/* get status */
-#define ACMD_GET_Q_CHANNEL      0x50		/* read info from q channel */
-#define ACMD_EJECT		0x60		/* eject/open tray */
-#define ACMD_CLOSE              0x61            /* close tray */
-#define ACMD_LOCK		0x71		/* lock tray closed */
-#define ACMD_UNLOCK		0x72		/* unlock tray */
-#define ACMD_PAUSE		0x80		/* pause */
-#define ACMD_STOP		0x81		/* stop play */
-#define ACMD_PLAY_AUDIO		0x90		/* play audio track */
-#define ACMD_SET_VOLUME		0x93		/* set audio level */
-#define ACMD_GET_VERSION	0xA0		/* get firmware version */
-#define ACMD_SET_DISK_TYPE	0xA1		/* set disk data mode */
-
-#define MAX_TRACKS		104
-
-struct msf {
-	unsigned char	min;
-	unsigned char	sec;
-	unsigned char	frame;
-};
-
-struct azt_Play_msf {
-	struct msf	start;
-	struct msf	end;
-};
-
-struct azt_DiskInfo {
-	unsigned char	first;
-        unsigned char   next;
-	unsigned char	last;
-	struct msf	diskLength;
-	struct msf	firstTrack;
-        unsigned char   multi;
-        struct msf      nextSession;
-        struct msf      lastSession;
-        unsigned char   xa;
-        unsigned char   audio;
-};
-
-struct azt_Toc {
-	unsigned char	ctrl_addr;
-	unsigned char	track;
-	unsigned char	pointIndex;
-	struct msf	trackTime;
-	struct msf	diskTime;
-};
diff --git a/drivers/cdrom/cdu31a.c b/drivers/cdrom/cdu31a.c
deleted file mode 100644
index 2157c58755e0..000000000000
--- a/drivers/cdrom/cdu31a.c
+++ /dev/null
@@ -1,3251 +0,0 @@
-/*
-* Sony CDU-31A CDROM interface device driver.
-*
-* Corey Minyard (minyard@wf-rch.cirr.com)
-*
-* Colossians 3:17
-*
-*  See Documentation/cdrom/cdu31a for additional details about this driver.
-* 
-* The Sony interface device driver handles Sony interface CDROM
-* drives and provides a complete block-level interface as well as an
-* ioctl() interface compatible with the Sun (as specified in
-* include/linux/cdrom.h).  With this interface, CDROMs can be
-* accessed and standard audio CDs can be played back normally.
-*
-* WARNING - 	All autoprobes have been removed from the driver.
-*		You MUST configure the CDU31A via a LILO config
-*		at boot time or in lilo.conf.  I have the
-*		following in my lilo.conf:
-*
-*                append="cdu31a=0x1f88,0,PAS"
-*
-*		The first number is the I/O base address of the
-*		card.  The second is the interrupt (0 means none).
- *		The third should be "PAS" if on a Pro-Audio
- *		spectrum, or nothing if on something else.
- *
- * This interface is (unfortunately) a polled interface.  This is
- * because most Sony interfaces are set up with DMA and interrupts
- * disables.  Some (like mine) do not even have the capability to
- * handle interrupts or DMA.  For this reason you will see a lot of
- * the following:
- *
- *   retry_count = jiffies+ SONY_JIFFIES_TIMEOUT;
- *   while (time_before(jiffies, retry_count) && (! <some condition to wait for))
- *   {
- *      while (handle_sony_cd_attention())
- *         ;
- *
- *      sony_sleep();
- *   }
- *   if (the condition not met)
- *   {
- *      return an error;
- *   }
- *
- * This ugly hack waits for something to happen, sleeping a little
- * between every try.  it also handles attentions, which are
- * asynchronous events from the drive informing the driver that a disk
- * has been inserted, removed, etc.
- *
- * NEWS FLASH - The driver now supports interrupts but they are
- * turned off by default.  Use of interrupts is highly encouraged, it
- * cuts CPU usage down to a reasonable level.  I had DMA in for a while
- * but PC DMA is just too slow.  Better to just insb() it.
- *
- * One thing about these drives: They talk in MSF (Minute Second Frame) format.
- * There are 75 frames a second, 60 seconds a minute, and up to 75 minutes on a
- * disk.  The funny thing is that these are sent to the drive in BCD, but the
- * interface wants to see them in decimal.  A lot of conversion goes on.
- *
- * DRIVER SPECIAL FEATURES
- * -----------------------
- *
- * This section describes features beyond the normal audio and CD-ROM
- * functions of the drive.
- *
- * XA compatibility
- *
- * The driver should support XA disks for both the CDU31A and CDU33A.
- * It does this transparently, the using program doesn't need to set it.
- *
- * Multi-Session
- *
- * A multi-session disk looks just like a normal disk to the user.
- * Just mount one normally, and all the data should be there.
- * A special thanks to Koen for help with this!
- * 
- * Raw sector I/O
- *
- * Using the CDROMREADAUDIO it is possible to read raw audio and data
- * tracks.  Both operations return 2352 bytes per sector.  On the data
- * tracks, the first 12 bytes is not returned by the drive and the value
- * of that data is indeterminate.
- *
- *
- *  Copyright (C) 1993  Corey Minyard
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * TODO: 
- *       CDs with form1 and form2 sectors cause problems
- *       with current read-ahead strategy.
- *
- * Credits:
- *    Heiko Eissfeldt <heiko@colossus.escape.de>
- *         For finding abug in the return of the track numbers.
- *         TOC processing redone for proper multisession support.
- *
- *
- *  It probably a little late to be adding a history, but I guess I
- *  will start.
- *
- *  10/24/95 - Added support for disabling the eject button when the
- *             drive is open.  Note that there is a small problem
- *             still here, if the eject button is pushed while the
- *             drive light is flashing, the drive will return a bad
- *             status and be reset.  It recovers, though.
- *
- *  03/07/97 - Fixed a problem with timers.
- *
- *
- *  18 Spetember 1997 -- Ported to Uniform CD-ROM driver by 
- *                 Heiko Eissfeldt <heiko@colossus.escape.de> with additional
- *                 changes by Erik Andersen <andersee@debian.org>
- *
- *  24 January 1998 -- Removed the scd_disc_status() function, which was now
- *                     just dead code left over from the port.
- *                          Erik Andersen <andersee@debian.org>
- *
- *  16 July 1998 -- Drive donated to Erik Andersen by John Kodis
- *                   <kodis@jagunet.com>.  Work begun on fixing driver to
- *                   work under 2.1.X.  Added temporary extra printks
- *                   which seem to slow it down enough to work.
- *
- *  9 November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	               Removed init_module & cleanup_module in favor of 
- *		       module_init & module_exit.
- *		       Torben Mathiasen <tmm@image.dk>
- *
- * 22 October 2004 -- Make the driver work in 2.6.X
- *		      Added workaround to fix hard lockups on eject
- *		      Fixed door locking problem after mounting empty drive
- *		      Set double-speed drives to double speed by default
- *		      Removed all readahead things - not needed anymore
- *			Ondrej Zary <rainbow@rainbow-software.org>
-*/
-
-#define DEBUG 1
-
-#include <linux/major.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/hdreg.h>
-#include <linux/genhd.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/cdrom.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/dma.h>
-
-#include "cdu31a.h"
-
-#define MAJOR_NR CDU31A_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-#define CDU31A_MAX_CONSECUTIVE_ATTENTIONS 10
-
-#define PFX "CDU31A: "
-
-/*
-** Edit the following data to change interrupts, DMA channels, etc.
-** Default is polled and no DMA.  DMA is not recommended for double-speed
-** drives.
-*/
-static struct {
-	unsigned short base;	/* I/O Base Address */
-	short int_num;		/* Interrupt Number (-1 means scan for it,
-				   0 means don't use) */
-} cdu31a_addresses[] __initdata = {
-	{0}
-};
-
-static int handle_sony_cd_attention(void);
-static int read_subcode(void);
-static void sony_get_toc(void);
-static int scd_spinup(void);
-/*static int scd_open(struct inode *inode, struct file *filp);*/
-static int scd_open(struct cdrom_device_info *, int);
-static void do_sony_cd_cmd(unsigned char cmd,
-			   unsigned char *params,
-			   unsigned int num_params,
-			   unsigned char *result_buffer,
-			   unsigned int *result_size);
-static void size_to_buf(unsigned int size, unsigned char *buf);
-
-/* Parameters for the read-ahead. */
-static unsigned int sony_next_block;	/* Next 512 byte block offset */
-static unsigned int sony_blocks_left = 0;	/* Number of 512 byte blocks left
-						   in the current read command. */
-
-
-/* The base I/O address of the Sony Interface.  This is a variable (not a
-   #define) so it can be easily changed via some future ioctl() */
-static unsigned int cdu31a_port = 0;
-module_param(cdu31a_port, uint, 0);
-
-/*
- * The following are I/O addresses of the various registers for the drive.  The
- * comment for the base address also applies here.
- */
-static volatile unsigned short sony_cd_cmd_reg;
-static volatile unsigned short sony_cd_param_reg;
-static volatile unsigned short sony_cd_write_reg;
-static volatile unsigned short sony_cd_control_reg;
-static volatile unsigned short sony_cd_status_reg;
-static volatile unsigned short sony_cd_result_reg;
-static volatile unsigned short sony_cd_read_reg;
-static volatile unsigned short sony_cd_fifost_reg;
-
-static struct request_queue *cdu31a_queue;
-static DEFINE_SPINLOCK(cdu31a_lock); /* queue lock */
-
-static int sony_spun_up = 0;	/* Has the drive been spun up? */
-
-static int sony_speed = 0;	/* Last wanted speed */
-
-static int sony_xa_mode = 0;	/* Is an XA disk in the drive
-				   and the drive a CDU31A? */
-
-static int sony_raw_data_mode = 1;	/* 1 if data tracks, 0 if audio.
-					   For raw data reads. */
-
-static unsigned int sony_usage = 0;	/* How many processes have the
-					   drive open. */
-
-static int sony_pas_init = 0;	/* Initialize the Pro-Audio
-				   Spectrum card? */
-
-static struct s_sony_session_toc single_toc;	/* Holds the
-						   table of
-						   contents. */
-
-static struct s_all_sessions_toc sony_toc;	/* entries gathered from all
-						   sessions */
-
-static int sony_toc_read = 0;	/* Has the TOC been read for
-				   the drive? */
-
-static struct s_sony_subcode last_sony_subcode;	/* Points to the last
-						   subcode address read */
-
-static DECLARE_MUTEX(sony_sem);		/* Semaphore for drive hardware access */
-
-static int is_double_speed = 0;	/* does the drive support double speed ? */
-
-static int is_auto_eject = 1;	/* Door has been locked? 1=No/0=Yes */
-
-/*
- * The audio status uses the values from read subchannel data as specified
- * in include/linux/cdrom.h.
- */
-static volatile int sony_audio_status = CDROM_AUDIO_NO_STATUS;
-
-/*
- * The following are a hack for pausing and resuming audio play.  The drive
- * does not work as I would expect it, if you stop it then start it again,
- * the drive seeks back to the beginning and starts over.  This holds the
- * position during a pause so a resume can restart it.  It uses the
- * audio status variable above to tell if it is paused.
- */
-static unsigned volatile char cur_pos_msf[3] = { 0, 0, 0 };
-static unsigned volatile char final_pos_msf[3] = { 0, 0, 0 };
-
-/* What IRQ is the drive using?  0 if none. */
-static int cdu31a_irq = 0;
-module_param(cdu31a_irq, int, 0);
-
-/* The interrupt handler will wake this queue up when it gets an
-   interrupts. */
-static DECLARE_WAIT_QUEUE_HEAD(cdu31a_irq_wait);
-static int irq_flag = 0;
-
-static int curr_control_reg = 0;	/* Current value of the control register */
-
-/* A disk changed variable.  When a disk change is detected, it will
-   all be set to TRUE.  As the upper layers ask for disk_changed status
-   it will be cleared. */
-static char disk_changed;
-
-/* This was readahead_buffer once... Now it's used only for audio reads */
-static char audio_buffer[CD_FRAMESIZE_RAW];
-
-/* Used to time a short period to abort an operation after the
-   drive has been idle for a while.  This keeps the light on
-   the drive from flashing for very long. */
-static struct timer_list cdu31a_abort_timer;
-
-/* Marks if the timeout has started an abort read.  This is used
-   on entry to the drive to tell the code to read out the status
-   from the abort read. */
-static int abort_read_started = 0;
-
-/*
- * Uniform cdrom interface function
- * report back, if disc has changed from time of last request.
- */
-static int scd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-{
-	int retval;
-
-	retval = disk_changed;
-	disk_changed = 0;
-
-	return retval;
-}
-
-/*
- * Uniform cdrom interface function
- * report back, if drive is ready
- */
-static int scd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
-	if (CDSL_CURRENT != slot_nr)
-		/* we have no changer support */
-		return -EINVAL;
-	if (sony_spun_up)
-		return CDS_DISC_OK;
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	if (scd_spinup() == 0)
-		sony_spun_up = 1;
-	up(&sony_sem);
-	return sony_spun_up ? CDS_DISC_OK : CDS_DRIVE_NOT_READY;
-}
-
-static inline void enable_interrupts(void)
-{
-	curr_control_reg |= (SONY_ATTN_INT_EN_BIT
-			     | SONY_RES_RDY_INT_EN_BIT
-			     | SONY_DATA_RDY_INT_EN_BIT);
-	outb(curr_control_reg, sony_cd_control_reg);
-}
-
-static inline void disable_interrupts(void)
-{
-	curr_control_reg &= ~(SONY_ATTN_INT_EN_BIT
-			      | SONY_RES_RDY_INT_EN_BIT
-			      | SONY_DATA_RDY_INT_EN_BIT);
-	outb(curr_control_reg, sony_cd_control_reg);
-}
-
-/*
- * Wait a little while (used for polling the drive).  If in initialization,
- * setting a timeout doesn't work, so just loop for a while.
- */
-static inline void sony_sleep(void)
-{
-	if (cdu31a_irq <= 0) {
-		yield();
-	} else {		/* Interrupt driven */
-		DEFINE_WAIT(w);
-		int first = 1;
-
-		while (1) {
-			prepare_to_wait(&cdu31a_irq_wait, &w,
-					TASK_INTERRUPTIBLE);
-			if (first) {
-				enable_interrupts();
-				first = 0;
-			}
-
-			if (irq_flag != 0)
-				break;
-			if (!signal_pending(current)) {
-				schedule();
-				continue;
-			} else
-				disable_interrupts();
-			break;
-		}
-		finish_wait(&cdu31a_irq_wait, &w);
-		irq_flag = 0;
-	}
-}
-
-
-/*
- * The following are convenience routine to read various status and set
- * various conditions in the drive.
- */
-static inline int is_attention(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_ATTN_BIT) != 0;
-}
-
-static inline int is_busy(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_BUSY_BIT) != 0;
-}
-
-static inline int is_data_ready(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_DATA_RDY_BIT) != 0;
-}
-
-static inline int is_data_requested(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_DATA_REQUEST_BIT) != 0;
-}
-
-static inline int is_result_ready(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_RES_RDY_BIT) != 0;
-}
-
-static inline int is_param_write_rdy(void)
-{
-	return (inb(sony_cd_fifost_reg) & SONY_PARAM_WRITE_RDY_BIT) != 0;
-}
-
-static inline int is_result_reg_not_empty(void)
-{
-	return (inb(sony_cd_fifost_reg) & SONY_RES_REG_NOT_EMP_BIT) != 0;
-}
-
-static inline void reset_drive(void)
-{
-	curr_control_reg = 0;
-	sony_toc_read = 0;
-	outb(SONY_DRIVE_RESET_BIT, sony_cd_control_reg);
-}
-
-/*
- * Uniform cdrom interface function
- * reset drive and return when it is ready
- */
-static int scd_reset(struct cdrom_device_info *cdi)
-{
-	unsigned long retry_count;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	reset_drive();
-
-	retry_count = jiffies + SONY_RESET_TIMEOUT;
-	while (time_before(jiffies, retry_count) && (!is_attention())) {
-		sony_sleep();
-	}
-
-	up(&sony_sem);
-	return 0;
-}
-
-static inline void clear_attention(void)
-{
-	outb(curr_control_reg | SONY_ATTN_CLR_BIT, sony_cd_control_reg);
-}
-
-static inline void clear_result_ready(void)
-{
-	outb(curr_control_reg | SONY_RES_RDY_CLR_BIT, sony_cd_control_reg);
-}
-
-static inline void clear_data_ready(void)
-{
-	outb(curr_control_reg | SONY_DATA_RDY_CLR_BIT,
-	     sony_cd_control_reg);
-}
-
-static inline void clear_param_reg(void)
-{
-	outb(curr_control_reg | SONY_PARAM_CLR_BIT, sony_cd_control_reg);
-}
-
-static inline unsigned char read_status_register(void)
-{
-	return inb(sony_cd_status_reg);
-}
-
-static inline unsigned char read_result_register(void)
-{
-	return inb(sony_cd_result_reg);
-}
-
-static inline unsigned char read_data_register(void)
-{
-	return inb(sony_cd_read_reg);
-}
-
-static inline void write_param(unsigned char param)
-{
-	outb(param, sony_cd_param_reg);
-}
-
-static inline void write_cmd(unsigned char cmd)
-{
-	outb(curr_control_reg | SONY_RES_RDY_INT_EN_BIT,
-	     sony_cd_control_reg);
-	outb(cmd, sony_cd_cmd_reg);
-}
-
-static irqreturn_t cdu31a_interrupt(int irq, void *dev_id)
-{
-	unsigned char val;
-
-	if (abort_read_started) {
-		/* We might be waiting for an abort to finish.  Don't
-		   disable interrupts yet, though, because we handle
-		   this one here. */
-		/* Clear out the result registers. */
-		while (is_result_reg_not_empty()) {
-			val = read_result_register();
-		}
-		clear_data_ready();
-		clear_result_ready();
-
-		/* Clear out the data */
-		while (is_data_requested()) {
-			val = read_data_register();
-		}
-		abort_read_started = 0;
-
-		/* If something was waiting, wake it up now. */
-		if (waitqueue_active(&cdu31a_irq_wait)) {
-			disable_interrupts();
-			irq_flag = 1;
-			wake_up_interruptible(&cdu31a_irq_wait);
-		}
-	} else if (waitqueue_active(&cdu31a_irq_wait)) {
-		disable_interrupts();
-		irq_flag = 1;
-		wake_up_interruptible(&cdu31a_irq_wait);
-	} else {
-		disable_interrupts();
-		printk(KERN_NOTICE PFX
-				"Got an interrupt but nothing was waiting\n");
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * give more verbose error messages
- */
-static unsigned char *translate_error(unsigned char err_code)
-{
-	static unsigned char errbuf[80];
-
-	switch (err_code) {
-		case 0x10: return "illegal command ";
-		case 0x11: return "illegal parameter ";
-
-		case 0x20: return "not loaded ";
-		case 0x21: return "no disc ";
-		case 0x22: return "not spinning ";
-		case 0x23: return "spinning ";
-		case 0x25: return "spindle servo ";
-		case 0x26: return "focus servo ";
-		case 0x29: return "eject mechanism ";
-		case 0x2a: return "audio playing ";
-		case 0x2c: return "emergency eject ";
-
-		case 0x30: return "focus ";
-		case 0x31: return "frame sync ";
-		case 0x32: return "subcode address ";
-		case 0x33: return "block sync ";
-		case 0x34: return "header address ";
-
-		case 0x40: return "illegal track read ";
-		case 0x41: return "mode 0 read ";
-		case 0x42: return "illegal mode read ";
-		case 0x43: return "illegal block size read ";
-		case 0x44: return "mode read ";
-		case 0x45: return "form read ";
-		case 0x46: return "leadout read ";
-		case 0x47: return "buffer overrun ";
-
-		case 0x53: return "unrecoverable CIRC ";
-		case 0x57: return "unrecoverable LECC ";
-
-		case 0x60: return "no TOC ";
-		case 0x61: return "invalid subcode data ";
-		case 0x63: return "focus on TOC read ";
-		case 0x64: return "frame sync on TOC read ";
-		case 0x65: return "TOC data ";
-
-		case 0x70: return "hardware failure ";
-		case 0x91: return "leadin ";
-		case 0x92: return "leadout ";
-		case 0x93: return "data track ";
-	}
-	sprintf(errbuf, "unknown 0x%02x ", err_code);
-	return errbuf;
-}
-
-/*
- * Set the drive parameters so the drive will auto-spin-up when a
- * disk is inserted.
- */
-static void set_drive_params(int want_doublespeed)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned char params[3];
-
-
-	params[0] = SONY_SD_AUTO_SPIN_DOWN_TIME;
-	params[1] = 0x00;	/* Never spin down the drive. */
-	do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-		       params, 2, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_NOTICE PFX
-			"Unable to set spin-down time: 0x%2.2x\n", res_reg[1]);
-	}
-
-	params[0] = SONY_SD_MECH_CONTROL;
-	params[1] = SONY_AUTO_SPIN_UP_BIT;	/* Set auto spin up */
-
-	if (is_auto_eject)
-		params[1] |= SONY_AUTO_EJECT_BIT;
-
-	if (is_double_speed && want_doublespeed) {
-		params[1] |= SONY_DOUBLE_SPEED_BIT;	/* Set the drive to double speed if 
-							   possible */
-	}
-	do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-		       params, 2, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_NOTICE PFX "Unable to set mechanical "
-				"parameters: 0x%2.2x\n", res_reg[1]);
-	}
-}
-
-/*
- * Uniform cdrom interface function
- * select reading speed for data access
- */
-static int scd_select_speed(struct cdrom_device_info *cdi, int speed)
-{
-	if (speed == 0)
-		sony_speed = 1;
-	else
-		sony_speed = speed - 1;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	set_drive_params(sony_speed);
-	up(&sony_sem);
-	return 0;
-}
-
-/*
- * Uniform cdrom interface function
- * lock or unlock eject button
- */
-static int scd_lock_door(struct cdrom_device_info *cdi, int lock)
-{
-	if (lock == 0) {
-		is_auto_eject = 1;
-	} else {
-		is_auto_eject = 0;
-	}
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	set_drive_params(sony_speed);
-	up(&sony_sem);
-	return 0;
-}
-
-/*
- * This code will reset the drive and attempt to restore sane parameters.
- */
-static void restart_on_error(void)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned long retry_count;
-
-
-	printk(KERN_NOTICE PFX "Resetting drive on error\n");
-	reset_drive();
-	retry_count = jiffies + SONY_RESET_TIMEOUT;
-	while (time_before(jiffies, retry_count) && (!is_attention())) {
-		sony_sleep();
-	}
-	set_drive_params(sony_speed);
-	do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_NOTICE PFX "Unable to spin up drive: 0x%2.2x\n",
-		       res_reg[1]);
-	}
-
-	msleep(2000);
-
-	sony_get_toc();
-}
-
-/*
- * This routine writes data to the parameter register.  Since this should
- * happen fairly fast, it is polled with no OS waits between.
- */
-static int write_params(unsigned char *params, int num_params)
-{
-	unsigned int retry_count;
-
-
-	retry_count = SONY_READY_RETRIES;
-	while ((retry_count > 0) && (!is_param_write_rdy())) {
-		retry_count--;
-	}
-	if (!is_param_write_rdy()) {
-		return -EIO;
-	}
-
-	while (num_params > 0) {
-		write_param(*params);
-		params++;
-		num_params--;
-	}
-
-	return 0;
-}
-
-
-/*
- * The following reads data from the command result register.  It is a
- * fairly complex routine, all status info flows back through this
- * interface.  The algorithm is stolen directly from the flowcharts in
- * the drive manual.
- */
-static void
-get_result(unsigned char *result_buffer, unsigned int *result_size)
-{
-	unsigned char a, b;
-	int i;
-	unsigned long retry_count;
-
-
-	while (handle_sony_cd_attention());
-	/* Wait for the result data to be ready */
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-	while (time_before(jiffies, retry_count)
-	       && (is_busy() || (!(is_result_ready())))) {
-		sony_sleep();
-
-		while (handle_sony_cd_attention());
-	}
-	if (is_busy() || (!(is_result_ready()))) {
-		pr_debug(PFX "timeout out %d\n", __LINE__);
-		result_buffer[0] = 0x20;
-		result_buffer[1] = SONY_TIMEOUT_OP_ERR;
-		*result_size = 2;
-		return;
-	}
-
-	/*
-	 * Get the first two bytes.  This determines what else needs
-	 * to be done.
-	 */
-	clear_result_ready();
-	a = read_result_register();
-	*result_buffer = a;
-	result_buffer++;
-
-	/* Check for block error status result. */
-	if ((a & 0xf0) == 0x50) {
-		*result_size = 1;
-		return;
-	}
-
-	b = read_result_register();
-	*result_buffer = b;
-	result_buffer++;
-	*result_size = 2;
-
-	/*
-	 * 0x20 means an error occurred.  Byte 2 will have the error code.
-	 * Otherwise, the command succeeded, byte 2 will have the count of
-	 * how many more status bytes are coming.
-	 *
-	 * The result register can be read 10 bytes at a time, a wait for
-	 * result ready to be asserted must be done between every 10 bytes.
-	 */
-	if ((a & 0xf0) != 0x20) {
-		if (b > 8) {
-			for (i = 0; i < 8; i++) {
-				*result_buffer = read_result_register();
-				result_buffer++;
-				(*result_size)++;
-			}
-			b = b - 8;
-
-			while (b > 10) {
-				retry_count = SONY_READY_RETRIES;
-				while ((retry_count > 0)
-				       && (!is_result_ready())) {
-					retry_count--;
-				}
-				if (!is_result_ready()) {
-					pr_debug(PFX "timeout out %d\n",
-					       __LINE__);
-					result_buffer[0] = 0x20;
-					result_buffer[1] =
-					    SONY_TIMEOUT_OP_ERR;
-					*result_size = 2;
-					return;
-				}
-
-				clear_result_ready();
-
-				for (i = 0; i < 10; i++) {
-					*result_buffer =
-					    read_result_register();
-					result_buffer++;
-					(*result_size)++;
-				}
-				b = b - 10;
-			}
-
-			if (b > 0) {
-				retry_count = SONY_READY_RETRIES;
-				while ((retry_count > 0)
-				       && (!is_result_ready())) {
-					retry_count--;
-				}
-				if (!is_result_ready()) {
-					pr_debug(PFX "timeout out %d\n",
-					       __LINE__);
-					result_buffer[0] = 0x20;
-					result_buffer[1] =
-					    SONY_TIMEOUT_OP_ERR;
-					*result_size = 2;
-					return;
-				}
-			}
-		}
-
-		while (b > 0) {
-			*result_buffer = read_result_register();
-			result_buffer++;
-			(*result_size)++;
-			b--;
-		}
-	}
-}
-
-/*
- * Do a command that does not involve data transfer.  This routine must
- * be re-entrant from the same task to support being called from the
- * data operation code when an error occurs.
- */
-static void
-do_sony_cd_cmd(unsigned char cmd,
-	       unsigned char *params,
-	       unsigned int num_params,
-	       unsigned char *result_buffer, unsigned int *result_size)
-{
-	unsigned long retry_count;
-	int num_retries = 0;
-
-retry_cd_operation:
-
-	while (handle_sony_cd_attention());
-
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-	while (time_before(jiffies, retry_count) && (is_busy())) {
-		sony_sleep();
-
-		while (handle_sony_cd_attention());
-	}
-	if (is_busy()) {
-		pr_debug(PFX "timeout out %d\n", __LINE__);
-		result_buffer[0] = 0x20;
-		result_buffer[1] = SONY_TIMEOUT_OP_ERR;
-		*result_size = 2;
-	} else {
-		clear_result_ready();
-		clear_param_reg();
-
-		write_params(params, num_params);
-		write_cmd(cmd);
-
-		get_result(result_buffer, result_size);
-	}
-
-	if (((result_buffer[0] & 0xf0) == 0x20)
-	    && (num_retries < MAX_CDU31A_RETRIES)) {
-		num_retries++;
-		msleep(100);
-		goto retry_cd_operation;
-	}
-}
-
-
-/*
- * Handle an attention from the drive.  This will return 1 if it found one
- * or 0 if not (if one is found, the caller might want to call again).
- *
- * This routine counts the number of consecutive times it is called
- * (since this is always called from a while loop until it returns
- * a 0), and returns a 0 if it happens too many times.  This will help
- * prevent a lockup.
- */
-static int handle_sony_cd_attention(void)
-{
-	unsigned char atten_code;
-	static int num_consecutive_attentions = 0;
-	volatile int val;
-
-
-#if 0
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-#endif
-	if (is_attention()) {
-		if (num_consecutive_attentions >
-		    CDU31A_MAX_CONSECUTIVE_ATTENTIONS) {
-			printk(KERN_NOTICE PFX "Too many consecutive "
-				"attentions: %d\n", num_consecutive_attentions);
-			num_consecutive_attentions = 0;
-			pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__,
-			       __LINE__);
-			return 0;
-		}
-
-		clear_attention();
-		atten_code = read_result_register();
-
-		switch (atten_code) {
-			/* Someone changed the CD.  Mark it as changed */
-		case SONY_MECH_LOADED_ATTN:
-			disk_changed = 1;
-			sony_toc_read = 0;
-			sony_audio_status = CDROM_AUDIO_NO_STATUS;
-			sony_blocks_left = 0;
-			break;
-
-		case SONY_SPIN_DOWN_COMPLETE_ATTN:
-			/* Mark the disk as spun down. */
-			sony_spun_up = 0;
-			break;
-
-		case SONY_AUDIO_PLAY_DONE_ATTN:
-			sony_audio_status = CDROM_AUDIO_COMPLETED;
-			read_subcode();
-			break;
-
-		case SONY_EJECT_PUSHED_ATTN:
-			if (is_auto_eject) {
-				sony_audio_status = CDROM_AUDIO_INVALID;
-			}
-			break;
-
-		case SONY_LEAD_IN_ERR_ATTN:
-		case SONY_LEAD_OUT_ERR_ATTN:
-		case SONY_DATA_TRACK_ERR_ATTN:
-		case SONY_AUDIO_PLAYBACK_ERR_ATTN:
-			sony_audio_status = CDROM_AUDIO_ERROR;
-			break;
-		}
-
-		num_consecutive_attentions++;
-		pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-		return 1;
-	} else if (abort_read_started) {
-		while (is_result_reg_not_empty()) {
-			val = read_result_register();
-		}
-		clear_data_ready();
-		clear_result_ready();
-		/* Clear out the data */
-		while (is_data_requested()) {
-			val = read_data_register();
-		}
-		abort_read_started = 0;
-		pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-		return 1;
-	}
-
-	num_consecutive_attentions = 0;
-#if 0
-	pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-#endif
-	return 0;
-}
-
-
-/* Convert from an integer 0-99 to BCD */
-static inline unsigned int int_to_bcd(unsigned int val)
-{
-	int retval;
-
-
-	retval = (val / 10) << 4;
-	retval = retval | val % 10;
-	return retval;
-}
-
-
-/* Convert from BCD to an integer from 0-99 */
-static unsigned int bcd_to_int(unsigned int bcd)
-{
-	return (((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f);
-}
-
-
-/*
- * Convert a logical sector value (like the OS would want to use for
- * a block device) to an MSF format.
- */
-static void log_to_msf(unsigned int log, unsigned char *msf)
-{
-	log = log + LOG_START_OFFSET;
-	msf[0] = int_to_bcd(log / 4500);
-	log = log % 4500;
-	msf[1] = int_to_bcd(log / 75);
-	msf[2] = int_to_bcd(log % 75);
-}
-
-
-/*
- * Convert an MSF format to a logical sector.
- */
-static unsigned int msf_to_log(unsigned char *msf)
-{
-	unsigned int log;
-
-
-	log = msf[2];
-	log += msf[1] * 75;
-	log += msf[0] * 4500;
-	log = log - LOG_START_OFFSET;
-
-	return log;
-}
-
-
-/*
- * Take in integer size value and put it into a buffer like
- * the drive would want to see a number-of-sector value.
- */
-static void size_to_buf(unsigned int size, unsigned char *buf)
-{
-	buf[0] = size / 65536;
-	size = size % 65536;
-	buf[1] = size / 256;
-	buf[2] = size % 256;
-}
-
-/* Starts a read operation. Returns 0 on success and 1 on failure. 
-   The read operation used here allows multiple sequential sectors 
-   to be read and status returned for each sector.  The driver will
-   read the output one at a time as the requests come and abort the
-   operation if the requested sector is not the next one from the
-   drive. */
-static int
-start_request(unsigned int sector, unsigned int nsect)
-{
-	unsigned char params[6];
-	unsigned long retry_count;
-
-
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-	log_to_msf(sector, params);
-	size_to_buf(nsect, &params[3]);
-
-	/*
-	 * Clear any outstanding attentions and wait for the drive to
-	 * complete any pending operations.
-	 */
-	while (handle_sony_cd_attention());
-
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-	while (time_before(jiffies, retry_count) && (is_busy())) {
-		sony_sleep();
-
-		while (handle_sony_cd_attention());
-	}
-
-	if (is_busy()) {
-		printk(KERN_NOTICE PFX "Timeout while waiting "
-				"to issue command\n");
-		pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-		return 1;
-	} else {
-		/* Issue the command */
-		clear_result_ready();
-		clear_param_reg();
-
-		write_params(params, 6);
-		write_cmd(SONY_READ_BLKERR_STAT_CMD);
-
-		sony_blocks_left = nsect * 4;
-		sony_next_block = sector * 4;
-		pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-		return 0;
-	}
-	pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-}
-
-/* Abort a pending read operation.  Clear all the drive status variables. */
-static void abort_read(void)
-{
-	unsigned char result_reg[2];
-	int result_size;
-	volatile int val;
-
-
-	do_sony_cd_cmd(SONY_ABORT_CMD, NULL, 0, result_reg, &result_size);
-	if ((result_reg[0] & 0xf0) == 0x20) {
-		printk(KERN_ERR PFX "Aborting read, %s error\n",
-		       translate_error(result_reg[1]));
-	}
-
-	while (is_result_reg_not_empty()) {
-		val = read_result_register();
-	}
-	clear_data_ready();
-	clear_result_ready();
-	/* Clear out the data */
-	while (is_data_requested()) {
-		val = read_data_register();
-	}
-
-	sony_blocks_left = 0;
-}
-
-/* Called when the timer times out.  This will abort the
-   pending read operation. */
-static void handle_abort_timeout(unsigned long data)
-{
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-	/* If it is in use, ignore it. */
-	if (down_trylock(&sony_sem) == 0) {
-		/* We can't use abort_read(), because it will sleep
-		   or schedule in the timer interrupt.  Just start
-		   the operation, finish it on the next access to
-		   the drive. */
-		clear_result_ready();
-		clear_param_reg();
-		write_cmd(SONY_ABORT_CMD);
-
-		sony_blocks_left = 0;
-		abort_read_started = 1;
-		up(&sony_sem);
-	}
-	pr_debug(PFX "Leaving %s\n", __FUNCTION__);
-}
-
-/* Actually get one sector of data from the drive. */
-static void
-input_data_sector(char *buffer)
-{
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
-	/* If an XA disk on a CDU31A, skip the first 12 bytes of data from
-	   the disk.  The real data is after that. We can use audio_buffer. */
-	if (sony_xa_mode)
-		insb(sony_cd_read_reg, audio_buffer, CD_XA_HEAD);
-
-	clear_data_ready();
-
-	insb(sony_cd_read_reg, buffer, 2048);
-
-	/* If an XA disk, we have to clear out the rest of the unused
-	   error correction data. We can use audio_buffer for that. */
-	if (sony_xa_mode)
-		insb(sony_cd_read_reg, audio_buffer, CD_XA_TAIL);
-
-	pr_debug(PFX "Leaving %s\n", __FUNCTION__);
-}
-
-/* read data from the drive.  Note the nsect must be <= 4. */
-static void
-read_data_block(char *buffer,
-		unsigned int block,
-		unsigned int nblocks,
-		unsigned char res_reg[], int *res_size)
-{
-	unsigned long retry_count;
-
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
-	res_reg[0] = 0;
-	res_reg[1] = 0;
-	*res_size = 0;
-
-	/* Wait for the drive to tell us we have something */
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-	while (time_before(jiffies, retry_count) && !(is_data_ready())) {
-		while (handle_sony_cd_attention());
-
-		sony_sleep();
-	}
-	if (!(is_data_ready())) {
-		if (is_result_ready()) {
-			get_result(res_reg, res_size);
-			if ((res_reg[0] & 0xf0) != 0x20) {
-				printk(KERN_NOTICE PFX "Got result that should"
-					" have been error: %d\n", res_reg[0]);
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_BAD_DATA_ERR;
-				*res_size = 2;
-			}
-			abort_read();
-		} else {
-			pr_debug(PFX "timeout out %d\n", __LINE__);
-			res_reg[0] = 0x20;
-			res_reg[1] = SONY_TIMEOUT_OP_ERR;
-			*res_size = 2;
-			abort_read();
-		}
-	} else {
-		input_data_sector(buffer);
-		sony_blocks_left -= nblocks;
-		sony_next_block += nblocks;
-
-		/* Wait for the status from the drive. */
-		retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-		while (time_before(jiffies, retry_count)
-		       && !(is_result_ready())) {
-			while (handle_sony_cd_attention());
-
-			sony_sleep();
-		}
-
-		if (!is_result_ready()) {
-			pr_debug(PFX "timeout out %d\n", __LINE__);
-			res_reg[0] = 0x20;
-			res_reg[1] = SONY_TIMEOUT_OP_ERR;
-			*res_size = 2;
-			abort_read();
-		} else {
-			get_result(res_reg, res_size);
-
-			/* If we got a buffer status, handle that. */
-			if ((res_reg[0] & 0xf0) == 0x50) {
-
-				if ((res_reg[0] ==
-				     SONY_NO_CIRC_ERR_BLK_STAT)
-				    || (res_reg[0] ==
-					SONY_NO_LECC_ERR_BLK_STAT)
-				    || (res_reg[0] ==
-					SONY_RECOV_LECC_ERR_BLK_STAT)) {
-					/* nothing here */
-				} else {
-					printk(KERN_ERR PFX "Data block "
-						"error: 0x%x\n", res_reg[0]);
-					res_reg[0] = 0x20;
-					res_reg[1] = SONY_BAD_DATA_ERR;
-					*res_size = 2;
-				}
-
-				/* Final transfer is done for read command, get final result. */
-				if (sony_blocks_left == 0) {
-					get_result(res_reg, res_size);
-				}
-			} else if ((res_reg[0] & 0xf0) != 0x20) {
-				/* The drive gave me bad status, I don't know what to do.
-				   Reset the driver and return an error. */
-				printk(KERN_ERR PFX "Invalid block "
-					"status: 0x%x\n", res_reg[0]);
-				restart_on_error();
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_BAD_DATA_ERR;
-				*res_size = 2;
-			}
-		}
-	}
-	pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-}
-
-
-/*
- * The OS calls this to perform a read or write operation to the drive.
- * Write obviously fail.  Reads to a read ahead of sony_buffer_size
- * bytes to help speed operations.  This especially helps since the OS
- * uses 1024 byte blocks and the drive uses 2048 byte blocks.  Since most
- * data access on a CD is done sequentially, this saves a lot of operations.
- */
-static void do_cdu31a_request(request_queue_t * q)
-{
-	struct request *req;
-	int block, nblock, num_retries;
-	unsigned char res_reg[12];
-	unsigned int res_size;
-
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
-	spin_unlock_irq(q->queue_lock);
-	if (down_interruptible(&sony_sem)) {
-		spin_lock_irq(q->queue_lock);
-		return;
-	}
-
-	/* Get drive status before doing anything. */
-	while (handle_sony_cd_attention());
-
-	/* Make sure we have a valid TOC. */
-	sony_get_toc();
-
-
-	/* Make sure the timer is cancelled. */
-	del_timer(&cdu31a_abort_timer);
-
-	while (1) {
-		/*
-		 * The beginning here is stolen from the hard disk driver.  I hope
-		 * it's right.
-		 */
-		req = elv_next_request(q);
-		if (!req)
-			goto end_do_cdu31a_request;
-
-		if (!sony_spun_up)
-			scd_spinup();
-
-		block = req->sector;
-		nblock = req->nr_sectors;
-		pr_debug(PFX "request at block %d, length %d blocks\n",
-			block, nblock);
-		if (!sony_toc_read) {
-			printk(KERN_NOTICE PFX "TOC not read\n");
-			end_request(req, 0);
-			continue;
-		}
-
-		/* WTF??? */
-		if (!blk_fs_request(req)) {
-			end_request(req, 0);
-			continue;
-		}
-		if (rq_data_dir(req) == WRITE) {
-			end_request(req, 0);
-			continue;
-		}
-
-		/*
-		 * If the block address is invalid or the request goes beyond the end of
-		 * the media, return an error.
-		 */
-		if (((block + nblock) / 4) >= sony_toc.lead_out_start_lba) {
-			printk(KERN_NOTICE PFX "Request past end of media\n");
-			end_request(req, 0);
-			continue;
-		}
-
-		if (nblock > 4)
-			nblock = 4;
-		num_retries = 0;
-
-	try_read_again:
-		while (handle_sony_cd_attention());
-
-		if (!sony_toc_read) {
-			printk(KERN_NOTICE PFX "TOC not read\n");
-			end_request(req, 0);
-			continue;
-		}
-
-		/* If no data is left to be read from the drive, start the
-		   next request. */
-		if (sony_blocks_left == 0) {
-			if (start_request(block / 4, nblock / 4)) {
-				end_request(req, 0);
-				continue;
-			}
-		}
-		/* If the requested block is not the next one waiting in
-		   the driver, abort the current operation and start a
-		   new one. */
-		else if (block != sony_next_block) {
-			pr_debug(PFX "Read for block %d, expected %d\n",
-				 block, sony_next_block);
-			abort_read();
-			if (!sony_toc_read) {
-				printk(KERN_NOTICE PFX "TOC not read\n");
-				end_request(req, 0);
-				continue;
-			}
-			if (start_request(block / 4, nblock / 4)) {
-				printk(KERN_NOTICE PFX "start request failed\n");
-				end_request(req, 0);
-				continue;
-			}
-		}
-
-		read_data_block(req->buffer, block, nblock, res_reg, &res_size);
-
-		if (res_reg[0] != 0x20) {
-			if (!end_that_request_first(req, 1, nblock)) {
-				spin_lock_irq(q->queue_lock);
-				blkdev_dequeue_request(req);
-				end_that_request_last(req, 1);
-				spin_unlock_irq(q->queue_lock);
-			}
-			continue;
-		}
-
-		if (num_retries > MAX_CDU31A_RETRIES) {
-			end_request(req, 0);
-			continue;
-		}
-
-		num_retries++;
-		if (res_reg[1] == SONY_NOT_SPIN_ERR) {
-			do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-					&res_size);
-		} else {
-			printk(KERN_NOTICE PFX "%s error for block %d, nblock %d\n",
-				 translate_error(res_reg[1]), block, nblock);
-		}
-		goto try_read_again;
-	}
-      end_do_cdu31a_request:
-#if 0
-	/* After finished, cancel any pending operations. */
-	abort_read();
-#else
-	/* Start a timer to time out after a while to disable
-	   the read. */
-	cdu31a_abort_timer.expires = jiffies + 2 * HZ;	/* Wait 2 seconds */
-	add_timer(&cdu31a_abort_timer);
-#endif
-
-	up(&sony_sem);
-	spin_lock_irq(q->queue_lock);
-	pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-}
-
-
-/*
- * Read the table of contents from the drive and set up TOC if
- * successful.
- */
-static void sony_get_toc(void)
-{
-	unsigned char res_reg[2];
-	unsigned int res_size;
-	unsigned char parms[1];
-	int session;
-	int num_spin_ups;
-	int totaltracks = 0;
-	int mint = 99;
-	int maxt = 0;
-
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
-	num_spin_ups = 0;
-	if (!sony_toc_read) {
-	      respinup_on_gettoc:
-		/* Ignore the result, since it might error if spinning already. */
-		do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		do_sony_cd_cmd(SONY_READ_TOC_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		/* The drive sometimes returns error 0.  I don't know why, but ignore
-		   it.  It seems to mean the drive has already done the operation. */
-		if ((res_size < 2)
-		    || ((res_reg[0] != 0) && (res_reg[1] != 0))) {
-			/* If the drive is already playing, it's ok.  */
-			if ((res_reg[1] == SONY_AUDIO_PLAYING_ERR)
-			    || (res_reg[1] == 0)) {
-				goto gettoc_drive_spinning;
-			}
-
-			/* If the drive says it is not spun up (even though we just did it!)
-			   then retry the operation at least a few times. */
-			if ((res_reg[1] == SONY_NOT_SPIN_ERR)
-			    && (num_spin_ups < MAX_CDU31A_RETRIES)) {
-				num_spin_ups++;
-				goto respinup_on_gettoc;
-			}
-
-			printk("cdu31a: Error reading TOC: %x %s\n",
-			       res_reg[0], translate_error(res_reg[1]));
-			return;
-		}
-
-	      gettoc_drive_spinning:
-
-		/* The idea here is we keep asking for sessions until the command
-		   fails.  Then we know what the last valid session on the disk is.
-		   No need to check session 0, since session 0 is the same as session
-		   1; the command returns different information if you give it 0. 
-		 */
-#if DEBUG
-		memset(&sony_toc, 0x0e, sizeof(sony_toc));
-		memset(&single_toc, 0x0f, sizeof(single_toc));
-#endif
-		session = 1;
-		while (1) {
-/* This seems to slow things down enough to make it work.  This
- * appears to be a problem in do_sony_cd_cmd.  This printk seems 
- * to address the symptoms...  -Erik */
-			pr_debug(PFX "Trying session %d\n", session);
-			parms[0] = session;
-			do_sony_cd_cmd(SONY_READ_TOC_SPEC_CMD,
-				       parms, 1, res_reg, &res_size);
-
-			pr_debug(PFX "%2.2x %2.2x\n", res_reg[0], res_reg[1]);
-
-			if ((res_size < 2)
-			    || ((res_reg[0] & 0xf0) == 0x20)) {
-				/* An error reading the TOC, this must be past the last session. */
-				if (session == 1)
-					printk
-					    ("Yikes! Couldn't read any sessions!");
-				break;
-			}
-			pr_debug(PFX "Reading session %d\n", session);
-
-			parms[0] = session;
-			do_sony_cd_cmd(SONY_REQ_TOC_DATA_SPEC_CMD,
-				       parms,
-				       1,
-				       (unsigned char *) &single_toc,
-				       &res_size);
-			if ((res_size < 2)
-			    || ((single_toc.exec_status[0] & 0xf0) ==
-				0x20)) {
-				printk(KERN_ERR PFX "Error reading "
-						"session %d: %x %s\n",
-				     session, single_toc.exec_status[0],
-				     translate_error(single_toc.
-						     exec_status[1]));
-				/* An error reading the TOC.  Return without sony_toc_read
-				   set. */
-				return;
-			}
-			pr_debug(PFX "add0 %01x, con0 %01x, poi0 %02x, "
-					"1st trk %d, dsktyp %x, dum0 %x\n",
-			     single_toc.address0, single_toc.control0,
-			     single_toc.point0,
-			     bcd_to_int(single_toc.first_track_num),
-			     single_toc.disk_type, single_toc.dummy0);
-			pr_debug(PFX "add1 %01x, con1 %01x, poi1 %02x, "
-					"lst trk %d, dummy1 %x, dum2 %x\n",
-			     single_toc.address1, single_toc.control1,
-			     single_toc.point1,
-			     bcd_to_int(single_toc.last_track_num),
-			     single_toc.dummy1, single_toc.dummy2);
-			pr_debug(PFX "add2 %01x, con2 %01x, poi2 %02x "
-				"leadout start min %d, sec %d, frame %d\n",
-			     single_toc.address2, single_toc.control2,
-			     single_toc.point2,
-			     bcd_to_int(single_toc.lead_out_start_msf[0]),
-			     bcd_to_int(single_toc.lead_out_start_msf[1]),
-			     bcd_to_int(single_toc.lead_out_start_msf[2]));
-			if (res_size > 18 && single_toc.pointb0 > 0xaf)
-				pr_debug(PFX "addb0 %01x, conb0 %01x, poib0 %02x, nextsession min %d, sec %d, frame %d\n"
-				     "#mode5_ptrs %02d, max_start_outer_leadout_msf min %d, sec %d, frame %d\n",
-				     single_toc.addressb0,
-				     single_toc.controlb0,
-				     single_toc.pointb0,
-				     bcd_to_int(single_toc.
-						next_poss_prog_area_msf
-						[0]),
-				     bcd_to_int(single_toc.
-						next_poss_prog_area_msf
-						[1]),
-				     bcd_to_int(single_toc.
-						next_poss_prog_area_msf
-						[2]),
-				     single_toc.num_mode_5_pointers,
-				     bcd_to_int(single_toc.
-						max_start_outer_leadout_msf
-						[0]),
-				     bcd_to_int(single_toc.
-						max_start_outer_leadout_msf
-						[1]),
-				     bcd_to_int(single_toc.
-						max_start_outer_leadout_msf
-						[2]));
-			if (res_size > 27 && single_toc.pointb1 > 0xaf)
-				pr_debug(PFX "addb1 %01x, conb1 %01x, poib1 %02x, %x %x %x %x #skipint_ptrs %d, #skiptrkassign %d %x\n",
-				     single_toc.addressb1,
-				     single_toc.controlb1,
-				     single_toc.pointb1,
-				     single_toc.dummyb0_1[0],
-				     single_toc.dummyb0_1[1],
-				     single_toc.dummyb0_1[2],
-				     single_toc.dummyb0_1[3],
-				     single_toc.num_skip_interval_pointers,
-				     single_toc.num_skip_track_assignments,
-				     single_toc.dummyb0_2);
-			if (res_size > 36 && single_toc.pointb2 > 0xaf)
-				pr_debug(PFX "addb2 %01x, conb2 %01x, poib2 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
-				     single_toc.addressb2,
-				     single_toc.controlb2,
-				     single_toc.pointb2,
-				     single_toc.tracksb2[0],
-				     single_toc.tracksb2[1],
-				     single_toc.tracksb2[2],
-				     single_toc.tracksb2[3],
-				     single_toc.tracksb2[4],
-				     single_toc.tracksb2[5],
-				     single_toc.tracksb2[6]);
-			if (res_size > 45 && single_toc.pointb3 > 0xaf)
-				pr_debug(PFX "addb3 %01x, conb3 %01x, poib3 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
-				     single_toc.addressb3,
-				     single_toc.controlb3,
-				     single_toc.pointb3,
-				     single_toc.tracksb3[0],
-				     single_toc.tracksb3[1],
-				     single_toc.tracksb3[2],
-				     single_toc.tracksb3[3],
-				     single_toc.tracksb3[4],
-				     single_toc.tracksb3[5],
-				     single_toc.tracksb3[6]);
-			if (res_size > 54 && single_toc.pointb4 > 0xaf)
-				pr_debug(PFX "addb4 %01x, conb4 %01x, poib4 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
-				     single_toc.addressb4,
-				     single_toc.controlb4,
-				     single_toc.pointb4,
-				     single_toc.tracksb4[0],
-				     single_toc.tracksb4[1],
-				     single_toc.tracksb4[2],
-				     single_toc.tracksb4[3],
-				     single_toc.tracksb4[4],
-				     single_toc.tracksb4[5],
-				     single_toc.tracksb4[6]);
-			if (res_size > 63 && single_toc.pointc0 > 0xaf)
-				pr_debug(PFX "addc0 %01x, conc0 %01x, poic0 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
-				     single_toc.addressc0,
-				     single_toc.controlc0,
-				     single_toc.pointc0,
-				     single_toc.dummyc0[0],
-				     single_toc.dummyc0[1],
-				     single_toc.dummyc0[2],
-				     single_toc.dummyc0[3],
-				     single_toc.dummyc0[4],
-				     single_toc.dummyc0[5],
-				     single_toc.dummyc0[6]);
-#undef DEBUG
-#define DEBUG 0
-
-			sony_toc.lead_out_start_msf[0] =
-			    bcd_to_int(single_toc.lead_out_start_msf[0]);
-			sony_toc.lead_out_start_msf[1] =
-			    bcd_to_int(single_toc.lead_out_start_msf[1]);
-			sony_toc.lead_out_start_msf[2] =
-			    bcd_to_int(single_toc.lead_out_start_msf[2]);
-			sony_toc.lead_out_start_lba =
-			    single_toc.lead_out_start_lba =
-			    msf_to_log(sony_toc.lead_out_start_msf);
-
-			/* For points that do not exist, move the data over them
-			   to the right location. */
-			if (single_toc.pointb0 != 0xb0) {
-				memmove(((char *) &single_toc) + 27,
-					((char *) &single_toc) + 18,
-					res_size - 18);
-				res_size += 9;
-			} else if (res_size > 18) {
-				sony_toc.lead_out_start_msf[0] =
-				    bcd_to_int(single_toc.
-					       max_start_outer_leadout_msf
-					       [0]);
-				sony_toc.lead_out_start_msf[1] =
-				    bcd_to_int(single_toc.
-					       max_start_outer_leadout_msf
-					       [1]);
-				sony_toc.lead_out_start_msf[2] =
-				    bcd_to_int(single_toc.
-					       max_start_outer_leadout_msf
-					       [2]);
-				sony_toc.lead_out_start_lba =
-				    msf_to_log(sony_toc.
-					       lead_out_start_msf);
-			}
-			if (single_toc.pointb1 != 0xb1) {
-				memmove(((char *) &single_toc) + 36,
-					((char *) &single_toc) + 27,
-					res_size - 27);
-				res_size += 9;
-			}
-			if (single_toc.pointb2 != 0xb2) {
-				memmove(((char *) &single_toc) + 45,
-					((char *) &single_toc) + 36,
-					res_size - 36);
-				res_size += 9;
-			}
-			if (single_toc.pointb3 != 0xb3) {
-				memmove(((char *) &single_toc) + 54,
-					((char *) &single_toc) + 45,
-					res_size - 45);
-				res_size += 9;
-			}
-			if (single_toc.pointb4 != 0xb4) {
-				memmove(((char *) &single_toc) + 63,
-					((char *) &single_toc) + 54,
-					res_size - 54);
-				res_size += 9;
-			}
-			if (single_toc.pointc0 != 0xc0) {
-				memmove(((char *) &single_toc) + 72,
-					((char *) &single_toc) + 63,
-					res_size - 63);
-				res_size += 9;
-			}
-#if DEBUG
-			printk(PRINT_INFO PFX "start track lba %u,  "
-					"leadout start lba %u\n",
-			     single_toc.start_track_lba,
-			     single_toc.lead_out_start_lba);
-			{
-				int i;
-				for (i = 0;
-				     i <
-				     1 +
-				     bcd_to_int(single_toc.last_track_num)
-				     -
-				     bcd_to_int(single_toc.
-						first_track_num); i++) {
-					printk(KERN_INFO PFX "trk %02d: add 0x%01x, con 0x%01x,  track %02d, start min %02d, sec %02d, frame %02d\n",
-					     i,
-					     single_toc.tracks[i].address,
-					     single_toc.tracks[i].control,
-					     bcd_to_int(single_toc.
-							tracks[i].track),
-					     bcd_to_int(single_toc.
-							tracks[i].
-							track_start_msf
-							[0]),
-					     bcd_to_int(single_toc.
-							tracks[i].
-							track_start_msf
-							[1]),
-					     bcd_to_int(single_toc.
-							tracks[i].
-							track_start_msf
-							[2]));
-					if (mint >
-					    bcd_to_int(single_toc.
-						       tracks[i].track))
-						mint =
-						    bcd_to_int(single_toc.
-							       tracks[i].
-							       track);
-					if (maxt <
-					    bcd_to_int(single_toc.
-						       tracks[i].track))
-						maxt =
-						    bcd_to_int(single_toc.
-							       tracks[i].
-							       track);
-				}
-				printk(KERN_INFO PFX "min track number %d,  "
-						"max track number %d\n",
-				     mint, maxt);
-			}
-#endif
-
-			/* prepare a special table of contents for a CD-I disc. They don't have one. */
-			if (single_toc.disk_type == 0x10 &&
-			    single_toc.first_track_num == 2 &&
-			    single_toc.last_track_num == 2 /* CD-I */ ) {
-				sony_toc.tracks[totaltracks].address = 1;
-				sony_toc.tracks[totaltracks].control = 4;	/* force data tracks */
-				sony_toc.tracks[totaltracks].track = 1;
-				sony_toc.tracks[totaltracks].
-				    track_start_msf[0] = 0;
-				sony_toc.tracks[totaltracks].
-				    track_start_msf[1] = 2;
-				sony_toc.tracks[totaltracks].
-				    track_start_msf[2] = 0;
-				mint = maxt = 1;
-				totaltracks++;
-			} else
-				/* gather track entries from this session */
-			{
-				int i;
-				for (i = 0;
-				     i <
-				     1 +
-				     bcd_to_int(single_toc.last_track_num)
-				     -
-				     bcd_to_int(single_toc.
-						first_track_num);
-				     i++, totaltracks++) {
-					sony_toc.tracks[totaltracks].
-					    address =
-					    single_toc.tracks[i].address;
-					sony_toc.tracks[totaltracks].
-					    control =
-					    single_toc.tracks[i].control;
-					sony_toc.tracks[totaltracks].
-					    track =
-					    bcd_to_int(single_toc.
-						       tracks[i].track);
-					sony_toc.tracks[totaltracks].
-					    track_start_msf[0] =
-					    bcd_to_int(single_toc.
-						       tracks[i].
-						       track_start_msf[0]);
-					sony_toc.tracks[totaltracks].
-					    track_start_msf[1] =
-					    bcd_to_int(single_toc.
-						       tracks[i].
-						       track_start_msf[1]);
-					sony_toc.tracks[totaltracks].
-					    track_start_msf[2] =
-					    bcd_to_int(single_toc.
-						       tracks[i].
-						       track_start_msf[2]);
-					if (i == 0)
-						single_toc.
-						    start_track_lba =
-						    msf_to_log(sony_toc.
-							       tracks
-							       [totaltracks].
-							       track_start_msf);
-					if (mint >
-					    sony_toc.tracks[totaltracks].
-					    track)
-						mint =
-						    sony_toc.
-						    tracks[totaltracks].
-						    track;
-					if (maxt <
-					    sony_toc.tracks[totaltracks].
-					    track)
-						maxt =
-						    sony_toc.
-						    tracks[totaltracks].
-						    track;
-				}
-			}
-			sony_toc.first_track_num = mint;
-			sony_toc.last_track_num = maxt;
-			/* Disk type of last session wins. For example:
-			   CD-Extra has disk type 0 for the first session, so
-			   a dumb HiFi CD player thinks it is a plain audio CD.
-			   We are interested in the disk type of the last session,
-			   which is 0x20 (XA) for CD-Extra, so we can access the
-			   data track ... */
-			sony_toc.disk_type = single_toc.disk_type;
-			sony_toc.sessions = session;
-
-			/* don't believe everything :-) */
-			if (session == 1)
-				single_toc.start_track_lba = 0;
-			sony_toc.start_track_lba =
-			    single_toc.start_track_lba;
-
-			if (session > 1 && single_toc.pointb0 == 0xb0 &&
-			    sony_toc.lead_out_start_lba ==
-			    single_toc.lead_out_start_lba) {
-				break;
-			}
-
-			/* Let's not get carried away... */
-			if (session > 40) {
-				printk(KERN_NOTICE PFX "too many sessions: "
-						"%d\n", session);
-				break;
-			}
-			session++;
-		}
-		sony_toc.track_entries = totaltracks;
-		/* add one entry for the LAST track with track number CDROM_LEADOUT */
-		sony_toc.tracks[totaltracks].address = single_toc.address2;
-		sony_toc.tracks[totaltracks].control = single_toc.control2;
-		sony_toc.tracks[totaltracks].track = CDROM_LEADOUT;
-		sony_toc.tracks[totaltracks].track_start_msf[0] =
-		    sony_toc.lead_out_start_msf[0];
-		sony_toc.tracks[totaltracks].track_start_msf[1] =
-		    sony_toc.lead_out_start_msf[1];
-		sony_toc.tracks[totaltracks].track_start_msf[2] =
-		    sony_toc.lead_out_start_msf[2];
-
-		sony_toc_read = 1;
-
-		pr_debug(PFX "Disk session %d, start track: %d, "
-				"stop track: %d\n",
-		     session, single_toc.start_track_lba,
-		     single_toc.lead_out_start_lba);
-	}
-	pr_debug(PFX "Leaving %s\n", __FUNCTION__);
-}
-
-
-/*
- * Uniform cdrom interface function
- * return multisession offset and sector information
- */
-static int scd_get_last_session(struct cdrom_device_info *cdi,
-				struct cdrom_multisession *ms_info)
-{
-	if (ms_info == NULL)
-		return 1;
-
-	if (!sony_toc_read) {
-		if (down_interruptible(&sony_sem))
-			return -ERESTARTSYS;
-		sony_get_toc();
-		up(&sony_sem);
-	}
-
-	ms_info->addr_format = CDROM_LBA;
-	ms_info->addr.lba = sony_toc.start_track_lba;
-	ms_info->xa_flag = sony_toc.disk_type == SONY_XA_DISK_TYPE ||
-	    sony_toc.disk_type == 0x10 /* CDI */ ;
-
-	return 0;
-}
-
-/*
- * Search for a specific track in the table of contents.
- */
-static int find_track(int track)
-{
-	int i;
-
-	for (i = 0; i <= sony_toc.track_entries; i++) {
-		if (sony_toc.tracks[i].track == track) {
-			return i;
-		}
-	}
-
-	return -1;
-}
-
-
-/*
- * Read the subcode and put it in last_sony_subcode for future use.
- */
-static int read_subcode(void)
-{
-	unsigned int res_size;
-
-
-	do_sony_cd_cmd(SONY_REQ_SUBCODE_ADDRESS_CMD,
-		       NULL,
-		       0, (unsigned char *) &last_sony_subcode, &res_size);
-	if ((res_size < 2)
-	    || ((last_sony_subcode.exec_status[0] & 0xf0) == 0x20)) {
-		printk(KERN_ERR PFX "Sony CDROM error %s (read_subcode)\n",
-		       translate_error(last_sony_subcode.exec_status[1]));
-		return -EIO;
-	}
-
-	last_sony_subcode.track_num =
-	    bcd_to_int(last_sony_subcode.track_num);
-	last_sony_subcode.index_num =
-	    bcd_to_int(last_sony_subcode.index_num);
-	last_sony_subcode.abs_msf[0] =
-	    bcd_to_int(last_sony_subcode.abs_msf[0]);
-	last_sony_subcode.abs_msf[1] =
-	    bcd_to_int(last_sony_subcode.abs_msf[1]);
-	last_sony_subcode.abs_msf[2] =
-	    bcd_to_int(last_sony_subcode.abs_msf[2]);
-
-	last_sony_subcode.rel_msf[0] =
-	    bcd_to_int(last_sony_subcode.rel_msf[0]);
-	last_sony_subcode.rel_msf[1] =
-	    bcd_to_int(last_sony_subcode.rel_msf[1]);
-	last_sony_subcode.rel_msf[2] =
-	    bcd_to_int(last_sony_subcode.rel_msf[2]);
-	return 0;
-}
-
-/*
- * Uniform cdrom interface function
- * return the media catalog number found on some older audio cds
- */
-static int
-scd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
-	unsigned char resbuffer[2 + 14];
-	unsigned char *mcnp = mcn->medium_catalog_number;
-	unsigned char *resp = resbuffer + 3;
-	unsigned int res_size;
-
-	memset(mcn->medium_catalog_number, 0, 14);
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	do_sony_cd_cmd(SONY_REQ_UPC_EAN_CMD,
-		       NULL, 0, resbuffer, &res_size);
-	up(&sony_sem);
-	if ((res_size < 2) || ((resbuffer[0] & 0xf0) == 0x20));
-	else {
-		/* packed bcd to single ASCII digits */
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-	}
-	*mcnp = '\0';
-	return 0;
-}
-
-
-/*
- * Get the subchannel info like the CDROMSUBCHNL command wants to see it.  If
- * the drive is playing, the subchannel needs to be read (since it would be
- * changing).  If the drive is paused or completed, the subcode information has
- * already been stored, just use that.  The ioctl call wants things in decimal
- * (not BCD), so all the conversions are done.
- */
-static int sony_get_subchnl_info(struct cdrom_subchnl *schi)
-{
-	/* Get attention stuff */
-	while (handle_sony_cd_attention());
-
-	sony_get_toc();
-	if (!sony_toc_read) {
-		return -EIO;
-	}
-
-	switch (sony_audio_status) {
-	case CDROM_AUDIO_NO_STATUS:
-	case CDROM_AUDIO_PLAY:
-		if (read_subcode() < 0) {
-			return -EIO;
-		}
-		break;
-
-	case CDROM_AUDIO_PAUSED:
-	case CDROM_AUDIO_COMPLETED:
-		break;
-
-#if 0
-	case CDROM_AUDIO_NO_STATUS:
-		schi->cdsc_audiostatus = sony_audio_status;
-		return 0;
-		break;
-#endif
-	case CDROM_AUDIO_INVALID:
-	case CDROM_AUDIO_ERROR:
-	default:
-		return -EIO;
-	}
-
-	schi->cdsc_audiostatus = sony_audio_status;
-	schi->cdsc_adr = last_sony_subcode.address;
-	schi->cdsc_ctrl = last_sony_subcode.control;
-	schi->cdsc_trk = last_sony_subcode.track_num;
-	schi->cdsc_ind = last_sony_subcode.index_num;
-	if (schi->cdsc_format == CDROM_MSF) {
-		schi->cdsc_absaddr.msf.minute =
-		    last_sony_subcode.abs_msf[0];
-		schi->cdsc_absaddr.msf.second =
-		    last_sony_subcode.abs_msf[1];
-		schi->cdsc_absaddr.msf.frame =
-		    last_sony_subcode.abs_msf[2];
-
-		schi->cdsc_reladdr.msf.minute =
-		    last_sony_subcode.rel_msf[0];
-		schi->cdsc_reladdr.msf.second =
-		    last_sony_subcode.rel_msf[1];
-		schi->cdsc_reladdr.msf.frame =
-		    last_sony_subcode.rel_msf[2];
-	} else if (schi->cdsc_format == CDROM_LBA) {
-		schi->cdsc_absaddr.lba =
-		    msf_to_log(last_sony_subcode.abs_msf);
-		schi->cdsc_reladdr.lba =
-		    msf_to_log(last_sony_subcode.rel_msf);
-	}
-
-	return 0;
-}
-
-/* Get audio data from the drive.  This is fairly complex because I
-   am looking for status and data at the same time, but if I get status
-   then I just look for data.  I need to get the status immediately so
-   the switch from audio to data tracks will happen quickly. */
-static void
-read_audio_data(char *buffer, unsigned char res_reg[], int *res_size)
-{
-	unsigned long retry_count;
-	int result_read;
-
-
-	res_reg[0] = 0;
-	res_reg[1] = 0;
-	*res_size = 0;
-	result_read = 0;
-
-	/* Wait for the drive to tell us we have something */
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-      continue_read_audio_wait:
-	while (time_before(jiffies, retry_count) && !(is_data_ready())
-	       && !(is_result_ready() || result_read)) {
-		while (handle_sony_cd_attention());
-
-		sony_sleep();
-	}
-	if (!(is_data_ready())) {
-		if (is_result_ready() && !result_read) {
-			get_result(res_reg, res_size);
-
-			/* Read block status and continue waiting for data. */
-			if ((res_reg[0] & 0xf0) == 0x50) {
-				result_read = 1;
-				goto continue_read_audio_wait;
-			}
-			/* Invalid data from the drive.  Shut down the operation. */
-			else if ((res_reg[0] & 0xf0) != 0x20) {
-				printk(KERN_WARNING PFX "Got result that "
-						"should have been error: %d\n",
-				     res_reg[0]);
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_BAD_DATA_ERR;
-				*res_size = 2;
-			}
-			abort_read();
-		} else {
-			pr_debug(PFX "timeout out %d\n", __LINE__);
-			res_reg[0] = 0x20;
-			res_reg[1] = SONY_TIMEOUT_OP_ERR;
-			*res_size = 2;
-			abort_read();
-		}
-	} else {
-		clear_data_ready();
-
-		/* If data block, then get 2340 bytes offset by 12. */
-		if (sony_raw_data_mode) {
-			insb(sony_cd_read_reg, buffer + CD_XA_HEAD,
-			     CD_FRAMESIZE_RAW1);
-		} else {
-			/* Audio gets the whole 2352 bytes. */
-			insb(sony_cd_read_reg, buffer, CD_FRAMESIZE_RAW);
-		}
-
-		/* If I haven't already gotten the result, get it now. */
-		if (!result_read) {
-			/* Wait for the drive to tell us we have something */
-			retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-			while (time_before(jiffies, retry_count)
-			       && !(is_result_ready())) {
-				while (handle_sony_cd_attention());
-
-				sony_sleep();
-			}
-
-			if (!is_result_ready()) {
-				pr_debug(PFX "timeout out %d\n", __LINE__);
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_TIMEOUT_OP_ERR;
-				*res_size = 2;
-				abort_read();
-				return;
-			} else {
-				get_result(res_reg, res_size);
-			}
-		}
-
-		if ((res_reg[0] & 0xf0) == 0x50) {
-			if ((res_reg[0] == SONY_NO_CIRC_ERR_BLK_STAT)
-			    || (res_reg[0] == SONY_NO_LECC_ERR_BLK_STAT)
-			    || (res_reg[0] == SONY_RECOV_LECC_ERR_BLK_STAT)
-			    || (res_reg[0] == SONY_NO_ERR_DETECTION_STAT)) {
-				/* Ok, nothing to do. */
-			} else {
-				printk(KERN_ERR PFX "Data block error: 0x%x\n",
-				       res_reg[0]);
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_BAD_DATA_ERR;
-				*res_size = 2;
-			}
-		} else if ((res_reg[0] & 0xf0) != 0x20) {
-			/* The drive gave me bad status, I don't know what to do.
-			   Reset the driver and return an error. */
-			printk(KERN_NOTICE PFX "Invalid block status: 0x%x\n",
-			       res_reg[0]);
-			restart_on_error();
-			res_reg[0] = 0x20;
-			res_reg[1] = SONY_BAD_DATA_ERR;
-			*res_size = 2;
-		}
-	}
-}
-
-/* Perform a raw data read.  This will automatically detect the
-   track type and read the proper data (audio or data). */
-static int read_audio(struct cdrom_read_audio *ra)
-{
-	int retval;
-	unsigned char params[2];
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned int cframe;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	if (!sony_spun_up)
-		scd_spinup();
-
-	/* Set the drive to do raw operations. */
-	params[0] = SONY_SD_DECODE_PARAM;
-	params[1] = 0x06 | sony_raw_data_mode;
-	do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-		       params, 2, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_ERR PFX "Unable to set decode params: 0x%2.2x\n",
-		       res_reg[1]);
-		retval = -EIO;
-		goto out_up;
-	}
-
-	/* From here down, we have to goto exit_read_audio instead of returning
-	   because the drive parameters have to be set back to data before
-	   return. */
-
-	retval = 0;
-	if (start_request(ra->addr.lba, ra->nframes)) {
-		retval = -EIO;
-		goto exit_read_audio;
-	}
-
-	/* For every requested frame. */
-	cframe = 0;
-	while (cframe < ra->nframes) {
-		read_audio_data(audio_buffer, res_reg, &res_size);
-		if ((res_reg[0] & 0xf0) == 0x20) {
-			if (res_reg[1] == SONY_BAD_DATA_ERR) {
-				printk(KERN_ERR PFX "Data error on audio "
-						"sector %d\n",
-				     ra->addr.lba + cframe);
-			} else if (res_reg[1] == SONY_ILL_TRACK_R_ERR) {
-				/* Illegal track type, change track types and start over. */
-				sony_raw_data_mode =
-				    (sony_raw_data_mode) ? 0 : 1;
-
-				/* Set the drive mode. */
-				params[0] = SONY_SD_DECODE_PARAM;
-				params[1] = 0x06 | sony_raw_data_mode;
-				do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-					       params,
-					       2, res_reg, &res_size);
-				if ((res_size < 2)
-				    || ((res_reg[0] & 0xf0) == 0x20)) {
-					printk(KERN_ERR PFX "Unable to set "
-						"decode params: 0x%2.2x\n",
-					     res_reg[1]);
-					retval = -EIO;
-					goto exit_read_audio;
-				}
-
-				/* Restart the request on the current frame. */
-				if (start_request
-				    (ra->addr.lba + cframe,
-				     ra->nframes - cframe)) {
-					retval = -EIO;
-					goto exit_read_audio;
-				}
-
-				/* Don't go back to the top because don't want to get into
-				   and infinite loop.  A lot of code gets duplicated, but
-				   that's no big deal, I don't guess. */
-				read_audio_data(audio_buffer, res_reg,
-						&res_size);
-				if ((res_reg[0] & 0xf0) == 0x20) {
-					if (res_reg[1] ==
-					    SONY_BAD_DATA_ERR) {
-						printk(KERN_ERR PFX "Data error"
-							" on audio sector %d\n",
-						     ra->addr.lba +
-						     cframe);
-					} else {
-						printk(KERN_ERR PFX "Error reading audio data on sector %d: %s\n",
-						     ra->addr.lba + cframe,
-						     translate_error
-						     (res_reg[1]));
-						retval = -EIO;
-						goto exit_read_audio;
-					}
-				} else if (copy_to_user(ra->buf +
-							       (CD_FRAMESIZE_RAW
-								* cframe),
-						        audio_buffer,
-							CD_FRAMESIZE_RAW)) {
-					retval = -EFAULT;
-					goto exit_read_audio;
-				}
-			} else {
-				printk(KERN_ERR PFX "Error reading audio "
-						"data on sector %d: %s\n",
-				     ra->addr.lba + cframe,
-				     translate_error(res_reg[1]));
-				retval = -EIO;
-				goto exit_read_audio;
-			}
-		} else if (copy_to_user(ra->buf + (CD_FRAMESIZE_RAW * cframe),
-					(char *)audio_buffer,
-					CD_FRAMESIZE_RAW)) {
-			retval = -EFAULT;
-			goto exit_read_audio;
-		}
-
-		cframe++;
-	}
-
-	get_result(res_reg, &res_size);
-	if ((res_reg[0] & 0xf0) == 0x20) {
-		printk(KERN_ERR PFX "Error return from audio read: %s\n",
-		       translate_error(res_reg[1]));
-		retval = -EIO;
-		goto exit_read_audio;
-	}
-
-      exit_read_audio:
-
-	/* Set the drive mode back to the proper one for the disk. */
-	params[0] = SONY_SD_DECODE_PARAM;
-	if (!sony_xa_mode) {
-		params[1] = 0x0f;
-	} else {
-		params[1] = 0x07;
-	}
-	do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-		       params, 2, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_ERR PFX "Unable to reset decode params: 0x%2.2x\n",
-		       res_reg[1]);
-		retval = -EIO;
-	}
-
- out_up:
-	up(&sony_sem);
-
-	return retval;
-}
-
-static int
-do_sony_cd_cmd_chk(const char *name,
-		   unsigned char cmd,
-		   unsigned char *params,
-		   unsigned int num_params,
-		   unsigned char *result_buffer, unsigned int *result_size)
-{
-	do_sony_cd_cmd(cmd, params, num_params, result_buffer,
-		       result_size);
-	if ((*result_size < 2) || ((result_buffer[0] & 0xf0) == 0x20)) {
-		printk(KERN_ERR PFX "Error %s (CDROM%s)\n",
-		       translate_error(result_buffer[1]), name);
-		return -EIO;
-	}
-	return 0;
-}
-
-/*
- * Uniform cdrom interface function
- * open the tray
- */
-static int scd_tray_move(struct cdrom_device_info *cdi, int position)
-{
-	int retval;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	if (position == 1 /* open tray */ ) {
-		unsigned char res_reg[12];
-		unsigned int res_size;
-
-		do_sony_cd_cmd(SONY_AUDIO_STOP_CMD, NULL, 0, res_reg,
-			       &res_size);
-		do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		sony_audio_status = CDROM_AUDIO_INVALID;
-		retval = do_sony_cd_cmd_chk("EJECT", SONY_EJECT_CMD, NULL, 0,
-					  res_reg, &res_size);
-	} else {
-		if (0 == scd_spinup())
-			sony_spun_up = 1;
-		retval = 0;
-	}
-	up(&sony_sem);
-	return retval;
-}
-
-/*
- * The big ugly ioctl handler.
- */
-static int scd_audio_ioctl(struct cdrom_device_info *cdi,
-			   unsigned int cmd, void *arg)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned char params[7];
-	int i, retval;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	switch (cmd) {
-	case CDROMSTART:	/* Spin up the drive */
-		retval = do_sony_cd_cmd_chk("START", SONY_SPIN_UP_CMD, NULL,
-					  0, res_reg, &res_size);
-		break;
-
-	case CDROMSTOP:	/* Spin down the drive */
-		do_sony_cd_cmd(SONY_AUDIO_STOP_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		/*
-		 * Spin the drive down, ignoring the error if the disk was
-		 * already not spinning.
-		 */
-		sony_audio_status = CDROM_AUDIO_NO_STATUS;
-		retval = do_sony_cd_cmd_chk("STOP", SONY_SPIN_DOWN_CMD, NULL,
-					  0, res_reg, &res_size);
-		break;
-
-	case CDROMPAUSE:	/* Pause the drive */
-		if (do_sony_cd_cmd_chk
-		    ("PAUSE", SONY_AUDIO_STOP_CMD, NULL, 0, res_reg,
-		     &res_size)) {
-			retval = -EIO;
-			break;
-		}
-		/* Get the current position and save it for resuming */
-		if (read_subcode() < 0) {
-			retval = -EIO;
-			break;
-		}
-		cur_pos_msf[0] = last_sony_subcode.abs_msf[0];
-		cur_pos_msf[1] = last_sony_subcode.abs_msf[1];
-		cur_pos_msf[2] = last_sony_subcode.abs_msf[2];
-		sony_audio_status = CDROM_AUDIO_PAUSED;
-		retval = 0;
-		break;
-
-	case CDROMRESUME:	/* Start the drive after being paused */
-		if (sony_audio_status != CDROM_AUDIO_PAUSED) {
-			retval = -EINVAL;
-			break;
-		}
-
-		do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		/* Start the drive at the saved position. */
-		params[1] = int_to_bcd(cur_pos_msf[0]);
-		params[2] = int_to_bcd(cur_pos_msf[1]);
-		params[3] = int_to_bcd(cur_pos_msf[2]);
-		params[4] = int_to_bcd(final_pos_msf[0]);
-		params[5] = int_to_bcd(final_pos_msf[1]);
-		params[6] = int_to_bcd(final_pos_msf[2]);
-		params[0] = 0x03;
-		if (do_sony_cd_cmd_chk
-		    ("RESUME", SONY_AUDIO_PLAYBACK_CMD, params, 7, res_reg,
-		     &res_size) < 0) {
-			retval = -EIO;
-			break;
-		}
-		sony_audio_status = CDROM_AUDIO_PLAY;
-		retval = 0;
-		break;
-
-	case CDROMPLAYMSF:	/* Play starting at the given MSF address. */
-		do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		/* The parameters are given in int, must be converted */
-		for (i = 1; i < 7; i++) {
-			params[i] =
-			    int_to_bcd(((unsigned char *) arg)[i - 1]);
-		}
-		params[0] = 0x03;
-		if (do_sony_cd_cmd_chk
-		    ("PLAYMSF", SONY_AUDIO_PLAYBACK_CMD, params, 7,
-		     res_reg, &res_size) < 0) {
-			retval = -EIO;
-			break;
-		}
-
-		/* Save the final position for pauses and resumes */
-		final_pos_msf[0] = bcd_to_int(params[4]);
-		final_pos_msf[1] = bcd_to_int(params[5]);
-		final_pos_msf[2] = bcd_to_int(params[6]);
-		sony_audio_status = CDROM_AUDIO_PLAY;
-		retval = 0;
-		break;
-
-	case CDROMREADTOCHDR:	/* Read the table of contents header */
-		{
-			struct cdrom_tochdr *hdr;
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				retval = -EIO;
-				break;
-			}
-
-			hdr = (struct cdrom_tochdr *) arg;
-			hdr->cdth_trk0 = sony_toc.first_track_num;
-			hdr->cdth_trk1 = sony_toc.last_track_num;
-		}
-		retval = 0;
-		break;
-
-	case CDROMREADTOCENTRY:	/* Read a given table of contents entry */
-		{
-			struct cdrom_tocentry *entry;
-			int track_idx;
-			unsigned char *msf_val = NULL;
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				retval = -EIO;
-				break;
-			}
-
-			entry = (struct cdrom_tocentry *) arg;
-
-			track_idx = find_track(entry->cdte_track);
-			if (track_idx < 0) {
-				retval = -EINVAL;
-				break;
-			}
-
-			entry->cdte_adr =
-			    sony_toc.tracks[track_idx].address;
-			entry->cdte_ctrl =
-			    sony_toc.tracks[track_idx].control;
-			msf_val =
-			    sony_toc.tracks[track_idx].track_start_msf;
-
-			/* Logical buffer address or MSF format requested? */
-			if (entry->cdte_format == CDROM_LBA) {
-				entry->cdte_addr.lba = msf_to_log(msf_val);
-			} else if (entry->cdte_format == CDROM_MSF) {
-				entry->cdte_addr.msf.minute = *msf_val;
-				entry->cdte_addr.msf.second =
-				    *(msf_val + 1);
-				entry->cdte_addr.msf.frame =
-				    *(msf_val + 2);
-			}
-		}
-		retval = 0;
-		break;
-
-	case CDROMPLAYTRKIND:	/* Play a track.  This currently ignores index. */
-		{
-			struct cdrom_ti *ti = (struct cdrom_ti *) arg;
-			int track_idx;
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				retval = -EIO;
-				break;
-			}
-
-			if ((ti->cdti_trk0 < sony_toc.first_track_num)
-			    || (ti->cdti_trk0 > sony_toc.last_track_num)
-			    || (ti->cdti_trk1 < ti->cdti_trk0)) {
-				retval = -EINVAL;
-				break;
-			}
-
-			track_idx = find_track(ti->cdti_trk0);
-			if (track_idx < 0) {
-				retval = -EINVAL;
-				break;
-			}
-			params[1] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[0]);
-			params[2] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[1]);
-			params[3] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[2]);
-
-			/*
-			 * If we want to stop after the last track, use the lead-out
-			 * MSF to do that.
-			 */
-			if (ti->cdti_trk1 >= sony_toc.last_track_num) {
-				track_idx = find_track(CDROM_LEADOUT);
-			} else {
-				track_idx = find_track(ti->cdti_trk1 + 1);
-			}
-			if (track_idx < 0) {
-				retval = -EINVAL;
-				break;
-			}
-			params[4] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[0]);
-			params[5] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[1]);
-			params[6] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[2]);
-			params[0] = 0x03;
-
-			do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-				       &res_size);
-
-			do_sony_cd_cmd(SONY_AUDIO_PLAYBACK_CMD, params, 7,
-				       res_reg, &res_size);
-
-			if ((res_size < 2)
-			    || ((res_reg[0] & 0xf0) == 0x20)) {
-				printk(KERN_ERR PFX
-					"Params: %x %x %x %x %x %x %x\n",
-				       params[0], params[1], params[2],
-				       params[3], params[4], params[5],
-				       params[6]);
-				printk(KERN_ERR PFX
-					"Error %s (CDROMPLAYTRKIND)\n",
-				     translate_error(res_reg[1]));
-				retval = -EIO;
-				break;
-			}
-
-			/* Save the final position for pauses and resumes */
-			final_pos_msf[0] = bcd_to_int(params[4]);
-			final_pos_msf[1] = bcd_to_int(params[5]);
-			final_pos_msf[2] = bcd_to_int(params[6]);
-			sony_audio_status = CDROM_AUDIO_PLAY;
-			retval = 0;
-			break;
-		}
-
-	case CDROMVOLCTRL:	/* Volume control.  What volume does this change, anyway? */
-		{
-			struct cdrom_volctrl *volctrl =
-			    (struct cdrom_volctrl *) arg;
-
-			params[0] = SONY_SD_AUDIO_VOLUME;
-			params[1] = volctrl->channel0;
-			params[2] = volctrl->channel1;
-			retval = do_sony_cd_cmd_chk("VOLCTRL",
-						  SONY_SET_DRIVE_PARAM_CMD,
-						  params, 3, res_reg,
-						  &res_size);
-			break;
-		}
-	case CDROMSUBCHNL:	/* Get subchannel info */
-		retval = sony_get_subchnl_info((struct cdrom_subchnl *) arg);
-		break;
-
-	default:
-		retval = -EINVAL;
-		break;
-	}
-	up(&sony_sem);
-	return retval;
-}
-
-static int scd_read_audio(struct cdrom_device_info *cdi,
-			 unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	int retval;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	switch (cmd) {
-	case CDROMREADAUDIO:	/* Read 2352 byte audio tracks and 2340 byte
-				   raw data tracks. */
-		{
-			struct cdrom_read_audio ra;
-
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				retval = -EIO;
-				break;
-			}
-
-			if (copy_from_user(&ra, argp, sizeof(ra))) {
-				retval = -EFAULT;
-				break;
-			}
-
-			if (ra.nframes == 0) {
-				retval = 0;
-				break;
-			}
-
-			if (!access_ok(VERIFY_WRITE, ra.buf,
-					CD_FRAMESIZE_RAW * ra.nframes))
-				return -EFAULT;
-
-			if (ra.addr_format == CDROM_LBA) {
-				if ((ra.addr.lba >=
-				     sony_toc.lead_out_start_lba)
-				    || (ra.addr.lba + ra.nframes >=
-					sony_toc.lead_out_start_lba)) {
-					retval = -EINVAL;
-					break;
-				}
-			} else if (ra.addr_format == CDROM_MSF) {
-				if ((ra.addr.msf.minute >= 75)
-				    || (ra.addr.msf.second >= 60)
-				    || (ra.addr.msf.frame >= 75)) {
-					retval = -EINVAL;
-					break;
-				}
-
-				ra.addr.lba = ((ra.addr.msf.minute * 4500)
-					       + (ra.addr.msf.second * 75)
-					       + ra.addr.msf.frame);
-				if ((ra.addr.lba >=
-				     sony_toc.lead_out_start_lba)
-				    || (ra.addr.lba + ra.nframes >=
-					sony_toc.lead_out_start_lba)) {
-					retval = -EINVAL;
-					break;
-				}
-
-				/* I know, this can go negative on an unsigned.  However,
-				   the first thing done to the data is to add this value,
-				   so this should compensate and allow direct msf access. */
-				ra.addr.lba -= LOG_START_OFFSET;
-			} else {
-				retval = -EINVAL;
-				break;
-			}
-
-			retval = read_audio(&ra);
-			break;
-		}
-		retval = 0;
-		break;
-
-	default:
-		retval = -EINVAL;
-	}
-	up(&sony_sem);
-	return retval;
-}
-
-static int scd_spinup(void)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	int num_spin_ups;
-
-	num_spin_ups = 0;
-
-      respinup_on_open:
-	do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size);
-
-	/* The drive sometimes returns error 0.  I don't know why, but ignore
-	   it.  It seems to mean the drive has already done the operation. */
-	if ((res_size < 2) || ((res_reg[0] != 0) && (res_reg[1] != 0))) {
-		printk(KERN_ERR PFX "%s error (scd_open, spin up)\n",
-		       translate_error(res_reg[1]));
-		return 1;
-	}
-
-	do_sony_cd_cmd(SONY_READ_TOC_CMD, NULL, 0, res_reg, &res_size);
-
-	/* The drive sometimes returns error 0.  I don't know why, but ignore
-	   it.  It seems to mean the drive has already done the operation. */
-	if ((res_size < 2) || ((res_reg[0] != 0) && (res_reg[1] != 0))) {
-		/* If the drive is already playing, it's ok.  */
-		if ((res_reg[1] == SONY_AUDIO_PLAYING_ERR)
-		    || (res_reg[1] == 0)) {
-			return 0;
-		}
-
-		/* If the drive says it is not spun up (even though we just did it!)
-		   then retry the operation at least a few times. */
-		if ((res_reg[1] == SONY_NOT_SPIN_ERR)
-		    && (num_spin_ups < MAX_CDU31A_RETRIES)) {
-			num_spin_ups++;
-			goto respinup_on_open;
-		}
-
-		printk(KERN_ERR PFX "Error %s (scd_open, read toc)\n",
-		       translate_error(res_reg[1]));
-		do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg,
-			       &res_size);
-		return 1;
-	}
-	return 0;
-}
-
-/*
- * Open the drive for operations.  Spin the drive up and read the table of
- * contents if these have not already been done.
- */
-static int scd_open(struct cdrom_device_info *cdi, int purpose)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned char params[2];
-
-	if (purpose == 1) {
-		/* Open for IOCTLs only - no media check */
-		sony_usage++;
-		return 0;
-	}
-
-	if (sony_usage == 0) {
-		if (scd_spinup() != 0)
-			return -EIO;
-		sony_get_toc();
-		if (!sony_toc_read) {
-			do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0,
-				       res_reg, &res_size);
-			return -EIO;
-		}
-
-		/* For XA on the CDU31A only, we have to do special reads.
-		   The CDU33A handles XA automagically. */
-		/* if (   (sony_toc.disk_type == SONY_XA_DISK_TYPE) */
-		if ((sony_toc.disk_type != 0x00)
-		    && (!is_double_speed)) {
-			params[0] = SONY_SD_DECODE_PARAM;
-			params[1] = 0x07;
-			do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-				       params, 2, res_reg, &res_size);
-			if ((res_size < 2)
-			    || ((res_reg[0] & 0xf0) == 0x20)) {
-				printk(KERN_WARNING PFX "Unable to set "
-					"XA params: 0x%2.2x\n", res_reg[1]);
-			}
-			sony_xa_mode = 1;
-		}
-		/* A non-XA disk.  Set the parms back if necessary. */
-		else if (sony_xa_mode) {
-			params[0] = SONY_SD_DECODE_PARAM;
-			params[1] = 0x0f;
-			do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-				       params, 2, res_reg, &res_size);
-			if ((res_size < 2)
-			    || ((res_reg[0] & 0xf0) == 0x20)) {
-				printk(KERN_WARNING PFX "Unable to reset "
-					"XA params: 0x%2.2x\n", res_reg[1]);
-			}
-			sony_xa_mode = 0;
-		}
-
-		sony_spun_up = 1;
-	}
-
-	sony_usage++;
-
-	return 0;
-}
-
-
-/*
- * Close the drive.  Spin it down if no task is using it.  The spin
- * down will fail if playing audio, so audio play is OK.
- */
-static void scd_release(struct cdrom_device_info *cdi)
-{
-	if (sony_usage == 1) {
-		unsigned char res_reg[12];
-		unsigned int res_size;
-
-		do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		sony_spun_up = 0;
-	}
-	sony_usage--;
-}
-
-static struct cdrom_device_ops scd_dops = {
-	.open			= scd_open,
-	.release		= scd_release,
-	.drive_status		= scd_drive_status,
-	.media_changed		= scd_media_changed,
-	.tray_move		= scd_tray_move,
-	.lock_door		= scd_lock_door,
-	.select_speed		= scd_select_speed,
-	.get_last_session	= scd_get_last_session,
-	.get_mcn		= scd_get_mcn,
-	.reset			= scd_reset,
-	.audio_ioctl		= scd_audio_ioctl,
-	.capability		= CDC_OPEN_TRAY | CDC_CLOSE_TRAY | CDC_LOCK |
-				  CDC_SELECT_SPEED | CDC_MULTI_SESSION |
-				  CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO |
-				  CDC_RESET | CDC_DRIVE_STATUS,
-	.n_minors		= 1,
-};
-
-static struct cdrom_device_info scd_info = {
-	.ops		= &scd_dops,
-	.speed		= 2,
-	.capacity	= 1,
-	.name		= "cdu31a"
-};
-
-static int scd_block_open(struct inode *inode, struct file *file)
-{
-	return cdrom_open(&scd_info, inode, file);
-}
-
-static int scd_block_release(struct inode *inode, struct file *file)
-{
-	return cdrom_release(&scd_info, file);
-}
-
-static int scd_block_ioctl(struct inode *inode, struct file *file,
-				unsigned cmd, unsigned long arg)
-{
-	int retval;
-
-	/* The eject and close commands should be handled by Uniform CD-ROM
-	 * driver - but I always got hard lockup instead of eject
-	 * until I put this here.
-	 */
-	switch (cmd) {
-		case CDROMEJECT:
-			scd_lock_door(&scd_info, 0);
-			retval = scd_tray_move(&scd_info, 1);
-			break;
-		case CDROMCLOSETRAY:
-			retval = scd_tray_move(&scd_info, 0);
-			break;
-		case CDROMREADAUDIO:
-			retval = scd_read_audio(&scd_info, CDROMREADAUDIO, arg);
-			break;
-		default:
-			retval = cdrom_ioctl(file, &scd_info, inode, cmd, arg);
-	}
-	return retval;
-}
-
-static int scd_block_media_changed(struct gendisk *disk)
-{
-	return cdrom_media_changed(&scd_info);
-}
-
-static struct block_device_operations scd_bdops =
-{
-	.owner		= THIS_MODULE,
-	.open		= scd_block_open,
-	.release	= scd_block_release,
-	.ioctl		= scd_block_ioctl,
-	.media_changed	= scd_block_media_changed,
-};
-
-static struct gendisk *scd_gendisk;
-
-/* The different types of disc loading mechanisms supported */
-static char *load_mech[] __initdata =
-    { "caddy", "tray", "pop-up", "unknown" };
-
-static int __init
-get_drive_configuration(unsigned short base_io,
-			unsigned char res_reg[], unsigned int *res_size)
-{
-	unsigned long retry_count;
-
-
-	if (!request_region(base_io, 4, "cdu31a"))
-		return 0;
-
-	/* Set the base address */
-	cdu31a_port = base_io;
-
-	/* Set up all the register locations */
-	sony_cd_cmd_reg = cdu31a_port + SONY_CMD_REG_OFFSET;
-	sony_cd_param_reg = cdu31a_port + SONY_PARAM_REG_OFFSET;
-	sony_cd_write_reg = cdu31a_port + SONY_WRITE_REG_OFFSET;
-	sony_cd_control_reg = cdu31a_port + SONY_CONTROL_REG_OFFSET;
-	sony_cd_status_reg = cdu31a_port + SONY_STATUS_REG_OFFSET;
-	sony_cd_result_reg = cdu31a_port + SONY_RESULT_REG_OFFSET;
-	sony_cd_read_reg = cdu31a_port + SONY_READ_REG_OFFSET;
-	sony_cd_fifost_reg = cdu31a_port + SONY_FIFOST_REG_OFFSET;
-
-	/*
-	 * Check to see if anything exists at the status register location.
-	 * I don't know if this is a good way to check, but it seems to work
-	 * ok for me.
-	 */
-	if (read_status_register() != 0xff) {
-		/*
-		 * Reset the drive and wait for attention from it (to say it's reset).
-		 * If you don't wait, the next operation will probably fail.
-		 */
-		reset_drive();
-		retry_count = jiffies + SONY_RESET_TIMEOUT;
-		while (time_before(jiffies, retry_count)
-		       && (!is_attention())) {
-			sony_sleep();
-		}
-
-#if 0
-		/* If attention is never seen probably not a CDU31a present */
-		if (!is_attention()) {
-			res_reg[0] = 0x20;
-			goto out_err;
-		}
-#endif
-
-		/*
-		 * Get the drive configuration.
-		 */
-		do_sony_cd_cmd(SONY_REQ_DRIVE_CONFIG_CMD,
-			       NULL,
-			       0, (unsigned char *) res_reg, res_size);
-		if (*res_size <= 2 || (res_reg[0] & 0xf0) != 0)
-			goto out_err;
-		return 1;
-	}
-
-	/* Return an error */
-	res_reg[0] = 0x20;
-out_err:
-	release_region(cdu31a_port, 4);
-	cdu31a_port = 0;
-	return 0;
-}
-
-#ifndef MODULE
-/*
- * Set up base I/O and interrupts, called from main.c.
- */
-
-static int __init cdu31a_setup(char *strings)
-{
-	int ints[4];
-
-	(void) get_options(strings, ARRAY_SIZE(ints), ints);
-
-	if (ints[0] > 0) {
-		cdu31a_port = ints[1];
-	}
-	if (ints[0] > 1) {
-		cdu31a_irq = ints[2];
-	}
-	if ((strings != NULL) && (*strings != '\0')) {
-		if (strcmp(strings, "PAS") == 0) {
-			sony_pas_init = 1;
-		} else {
-			printk(KERN_NOTICE PFX "Unknown interface type: %s\n",
-			       strings);
-		}
-	}
-
-	return 1;
-}
-
-__setup("cdu31a=", cdu31a_setup);
-
-#endif
-
-/*
- * Initialize the driver.
- */
-int __init cdu31a_init(void)
-{
-	struct s_sony_drive_config drive_config;
-	struct gendisk *disk;
-	int deficiency = 0;
-	unsigned int res_size;
-	char msg[255];
-	char buf[40];
-	int i;
-	int tmp_irq;
-
-	/*
-	 * According to Alex Freed (freed@europa.orion.adobe.com), this is
-	 * required for the Fusion CD-16 package.  If the sound driver is
-	 * loaded, it should work fine, but just in case...
-	 *
-	 * The following turn on the CD-ROM interface for a Fusion CD-16.
-	 */
-	if (sony_pas_init) {
-		outb(0xbc, 0x9a01);
-		outb(0xe2, 0x9a01);
-	}
-
-	/* Setting the base I/O address to 0xffff will disable it. */
-	if (cdu31a_port == 0xffff)
-		goto errout3;
-
-	if (cdu31a_port != 0) {
-		/* Need IRQ 0 because we can't sleep here. */
-		tmp_irq = cdu31a_irq;
-		cdu31a_irq = 0;
-		if (!get_drive_configuration(cdu31a_port,
-					    drive_config.exec_status,
-					    &res_size))
-			goto errout3;
-		cdu31a_irq = tmp_irq;
-	} else {
-		cdu31a_irq = 0;
-		for (i = 0; cdu31a_addresses[i].base; i++) {
-			if (get_drive_configuration(cdu31a_addresses[i].base,
-						     drive_config.exec_status,
-						     &res_size)) {
-				cdu31a_irq = cdu31a_addresses[i].int_num;
-				break;
-			}
-		}
-		if (!cdu31a_port)
-			goto errout3;
-	}
-
-	if (register_blkdev(MAJOR_NR, "cdu31a"))
-		goto errout2;
-
-	disk = alloc_disk(1);
-	if (!disk)
-		goto errout1;
-	disk->major = MAJOR_NR;
-	disk->first_minor = 0;
-	sprintf(disk->disk_name, "cdu31a");
-	disk->fops = &scd_bdops;
-	disk->flags = GENHD_FL_CD;
-
-	if (SONY_HWC_DOUBLE_SPEED(drive_config))
-		is_double_speed = 1;
-
-	tmp_irq = cdu31a_irq;	/* Need IRQ 0 because we can't sleep here. */
-	cdu31a_irq = 0;
-
-	sony_speed = is_double_speed; /* Set 2X drives to 2X by default */
-	set_drive_params(sony_speed);
-
-	cdu31a_irq = tmp_irq;
-
-	if (cdu31a_irq > 0) {
-		if (request_irq
-		    (cdu31a_irq, cdu31a_interrupt, IRQF_DISABLED,
-		     "cdu31a", NULL)) {
-			printk(KERN_WARNING PFX "Unable to grab IRQ%d for "
-					"the CDU31A driver\n", cdu31a_irq);
-			cdu31a_irq = 0;
-		}
-	}
-
-	sprintf(msg, "Sony I/F CDROM : %8.8s %16.16s %8.8s\n",
-		drive_config.vendor_id,
-		drive_config.product_id,
-		drive_config.product_rev_level);
-	sprintf(buf, "  Capabilities: %s",
-		load_mech[SONY_HWC_GET_LOAD_MECH(drive_config)]);
-	strcat(msg, buf);
-	if (SONY_HWC_AUDIO_PLAYBACK(drive_config))
-		strcat(msg, ", audio");
-	else
-		deficiency |= CDC_PLAY_AUDIO;
-	if (SONY_HWC_EJECT(drive_config))
-		strcat(msg, ", eject");
-	else
-		deficiency |= CDC_OPEN_TRAY;
-	if (SONY_HWC_LED_SUPPORT(drive_config))
-		strcat(msg, ", LED");
-	if (SONY_HWC_ELECTRIC_VOLUME(drive_config))
-		strcat(msg, ", elec. Vol");
-	if (SONY_HWC_ELECTRIC_VOLUME_CTL(drive_config))
-		strcat(msg, ", sep. Vol");
-	if (is_double_speed)
-		strcat(msg, ", double speed");
-	else
-		deficiency |= CDC_SELECT_SPEED;
-	if (cdu31a_irq > 0) {
-		sprintf(buf, ", irq %d", cdu31a_irq);
-		strcat(msg, buf);
-	}
-	strcat(msg, "\n");
-	printk(KERN_INFO PFX "%s",msg);
-
-	cdu31a_queue = blk_init_queue(do_cdu31a_request, &cdu31a_lock);
-	if (!cdu31a_queue)
-		goto errout0;
-	blk_queue_hardsect_size(cdu31a_queue, 2048);
-
-	init_timer(&cdu31a_abort_timer);
-	cdu31a_abort_timer.function = handle_abort_timeout;
-
-	scd_info.mask = deficiency;
-	scd_gendisk = disk;
-	if (register_cdrom(&scd_info))
-		goto err;
-	disk->queue = cdu31a_queue;
-	add_disk(disk);
-
-	disk_changed = 1;
-	return 0;
-
-err:
-	blk_cleanup_queue(cdu31a_queue);
-errout0:
-	if (cdu31a_irq)
-		free_irq(cdu31a_irq, NULL);
-	printk(KERN_ERR PFX "Unable to register with Uniform cdrom driver\n");
-	put_disk(disk);
-errout1:
-	if (unregister_blkdev(MAJOR_NR, "cdu31a")) {
-		printk(KERN_WARNING PFX "Can't unregister block device\n");
-	}
-errout2:
-	release_region(cdu31a_port, 4);
-errout3:
-	return -EIO;
-}
-
-
-static void __exit cdu31a_exit(void)
-{
-	del_gendisk(scd_gendisk);
-	put_disk(scd_gendisk);
-	if (unregister_cdrom(&scd_info)) {
-		printk(KERN_WARNING PFX "Can't unregister from Uniform "
-				"cdrom driver\n");
-		return;
-	}
-	if ((unregister_blkdev(MAJOR_NR, "cdu31a") == -EINVAL)) {
-		printk(KERN_WARNING PFX "Can't unregister\n");
-		return;
-	}
-
-	blk_cleanup_queue(cdu31a_queue);
-
-	if (cdu31a_irq > 0)
-		free_irq(cdu31a_irq, NULL);
-
-	release_region(cdu31a_port, 4);
-	printk(KERN_INFO PFX "module released.\n");
-}
-
-#ifdef MODULE
-module_init(cdu31a_init);
-#endif
-module_exit(cdu31a_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(CDU31A_CDROM_MAJOR);
diff --git a/drivers/cdrom/cdu31a.h b/drivers/cdrom/cdu31a.h
deleted file mode 100644
index 61d4768c412e..000000000000
--- a/drivers/cdrom/cdu31a.h
+++ /dev/null
@@ -1,411 +0,0 @@
-/*
- * Definitions for a Sony interface CDROM drive.
- *
- * Corey Minyard (minyard@wf-rch.cirr.com)
- *
- *  Copyright (C) 1993  Corey Minyard
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * General defines.
- */
-#define SONY_XA_DISK_TYPE 0x20
-
-/*
- * Offsets (from the base address) and bits for the various write registers
- * of the drive.
- */
-#define SONY_CMD_REG_OFFSET     0
-#define SONY_PARAM_REG_OFFSET   1
-#define SONY_WRITE_REG_OFFSET   2
-#define SONY_CONTROL_REG_OFFSET 3
-#       define SONY_ATTN_CLR_BIT        0x01
-#       define SONY_RES_RDY_CLR_BIT     0x02
-#       define SONY_DATA_RDY_CLR_BIT    0x04
-#       define SONY_ATTN_INT_EN_BIT     0x08
-#       define SONY_RES_RDY_INT_EN_BIT  0x10
-#       define SONY_DATA_RDY_INT_EN_BIT 0x20
-#       define SONY_PARAM_CLR_BIT       0x40
-#       define SONY_DRIVE_RESET_BIT     0x80
-
-/*
- * Offsets (from the base address) and bits for the various read registers
- * of the drive.
- */
-#define SONY_STATUS_REG_OFFSET  0
-#       define SONY_ATTN_BIT            0x01
-#       define SONY_RES_RDY_BIT         0x02
-#       define SONY_DATA_RDY_BIT        0x04
-#       define SONY_ATTN_INT_ST_BIT     0x08
-#       define SONY_RES_RDY_INT_ST_BIT  0x10
-#       define SONY_DATA_RDY_INT_ST_BIT 0x20
-#       define SONY_DATA_REQUEST_BIT    0x40
-#       define SONY_BUSY_BIT            0x80
-#define SONY_RESULT_REG_OFFSET  1
-#define SONY_READ_REG_OFFSET    2
-#define SONY_FIFOST_REG_OFFSET  3
-#       define SONY_PARAM_WRITE_RDY_BIT 0x01
-#       define SONY_PARAM_REG_EMPTY_BIT 0x02
-#       define SONY_RES_REG_NOT_EMP_BIT 0x04
-#       define SONY_RES_REG_FULL_BIT    0x08
-
-#define LOG_START_OFFSET        150     /* Offset of first logical sector */
-
-#define SONY_DETECT_TIMEOUT	(8*HZ/10) /* Maximum amount of time
-                                           that drive detection code
-                                           will wait for response
-                                           from drive (in 1/100th's
-                                           of seconds). */
- 
-#define SONY_JIFFIES_TIMEOUT    (10*HZ)	/* Maximum number of times the
-                                           drive will wait/try for an
-                                           operation */
-#define SONY_RESET_TIMEOUT      HZ	/* Maximum number of times the
-                                           drive will wait/try a reset
-                                           operation */
-#define SONY_READY_RETRIES      20000   /* How many times to retry a
-                                           spin waiting for a register
-                                           to come ready */
-
-#define MAX_CDU31A_RETRIES      3       /* How many times to retry an
-                                           operation */
-
-/* Commands to request or set drive control parameters and disc information */
-#define SONY_REQ_DRIVE_CONFIG_CMD       0x00    /* Returns s_sony_drive_config */
-#define SONY_REQ_DRIVE_MODE_CMD         0x01
-#define SONY_REQ_DRIVE_PARAM_CMD        0x02
-#define SONY_REQ_MECH_STATUS_CMD        0x03
-#define SONY_REQ_AUDIO_STATUS_CMD       0x04
-#define SONY_SET_DRIVE_PARAM_CMD        0x10
-#define SONY_REQ_TOC_DATA_CMD           0x20    /* Returns s_sony_toc */
-#define SONY_REQ_SUBCODE_ADDRESS_CMD    0x21    /* Returns s_sony_subcode */
-#define SONY_REQ_UPC_EAN_CMD            0x22
-#define SONY_REQ_ISRC_CMD               0x23
-#define SONY_REQ_TOC_DATA_SPEC_CMD      0x24    /* Returns s_sony_session_toc */
-
-/* Commands to request information from the drive */
-#define SONY_READ_TOC_CMD               0x30    /* let the drive firmware grab the TOC */
-#define SONY_SEEK_CMD                   0x31
-#define SONY_READ_CMD                   0x32
-#define SONY_READ_BLKERR_STAT_CMD       0x34
-#define SONY_ABORT_CMD                  0x35
-#define SONY_READ_TOC_SPEC_CMD          0x36
-
-/* Commands to control audio */
-#define SONY_AUDIO_PLAYBACK_CMD         0x40
-#define SONY_AUDIO_STOP_CMD             0x41
-#define SONY_AUDIO_SCAN_CMD             0x42
-
-/* Miscellaneous control commands */
-#define SONY_EJECT_CMD                  0x50
-#define SONY_SPIN_UP_CMD                0x51
-#define SONY_SPIN_DOWN_CMD              0x52
-
-/* Diagnostic commands */
-#define SONY_WRITE_BUFFER_CMD           0x60
-#define SONY_READ_BUFFER_CMD            0x61
-#define SONY_DIAGNOSTICS_CMD            0x62
-
-
-/*
- * The following are command parameters for the set drive parameter command
- */
-#define SONY_SD_DECODE_PARAM            0x00
-#define SONY_SD_INTERFACE_PARAM         0x01
-#define SONY_SD_BUFFERING_PARAM         0x02
-#define SONY_SD_AUDIO_PARAM             0x03
-#define SONY_SD_AUDIO_VOLUME            0x04
-#define SONY_SD_MECH_CONTROL            0x05
-#define SONY_SD_AUTO_SPIN_DOWN_TIME     0x06
-
-/*
- * The following are parameter bits for the mechanical control command
- */
-#define SONY_AUTO_SPIN_UP_BIT           0x01
-#define SONY_AUTO_EJECT_BIT             0x02
-#define SONY_DOUBLE_SPEED_BIT           0x04
-
-/*
- * The following extract information from the drive configuration about
- * the drive itself.
- */
-#define SONY_HWC_GET_LOAD_MECH(c)       (c.hw_config[0] & 0x03)
-#define SONY_HWC_EJECT(c)               (c.hw_config[0] & 0x04)
-#define SONY_HWC_LED_SUPPORT(c)         (c.hw_config[0] & 0x08)
-#define SONY_HWC_DOUBLE_SPEED(c)        (c.hw_config[0] & 0x10)
-#define SONY_HWC_GET_BUF_MEM_SIZE(c)    ((c.hw_config[0] & 0xc0) >> 6)
-#define SONY_HWC_AUDIO_PLAYBACK(c)      (c.hw_config[1] & 0x01)
-#define SONY_HWC_ELECTRIC_VOLUME(c)     (c.hw_config[1] & 0x02)
-#define SONY_HWC_ELECTRIC_VOLUME_CTL(c) (c.hw_config[1] & 0x04)
-
-#define SONY_HWC_CADDY_LOAD_MECH        0x00
-#define SONY_HWC_TRAY_LOAD_MECH         0x01
-#define SONY_HWC_POPUP_LOAD_MECH        0x02
-#define SONY_HWC_UNKWN_LOAD_MECH        0x03
-
-#define SONY_HWC_8KB_BUFFER             0x00
-#define SONY_HWC_32KB_BUFFER            0x01
-#define SONY_HWC_64KB_BUFFER            0x02
-#define SONY_HWC_UNKWN_BUFFER           0x03
-
-/*
- * This is the complete status returned from the drive configuration request
- * command.
- */
-struct s_sony_drive_config
-{
-   unsigned char exec_status[2];
-   char vendor_id[8];
-   char product_id[16];
-   char product_rev_level[8];
-   unsigned char hw_config[2];
-};
-
-/* The following is returned from the request subcode address command */
-struct s_sony_subcode
-{
-   unsigned char exec_status[2];
-   unsigned char address        :4;
-   unsigned char control        :4;
-   unsigned char track_num;
-   unsigned char index_num;
-   unsigned char rel_msf[3];
-   unsigned char reserved1;
-   unsigned char abs_msf[3];
-};
-
-#define MAX_TRACKS 100	/* The maximum tracks a disk may have. */
-/*
- * The following is returned from the request TOC (Table Of Contents) command.
- * (last_track_num-first_track_num+1) values are valid in tracks.
- */
-struct s_sony_toc
-{
-   unsigned char exec_status[2];
-   unsigned char address0       :4;
-   unsigned char control0       :4;
-   unsigned char point0;
-   unsigned char first_track_num;
-   unsigned char disk_type;
-   unsigned char dummy0;
-   unsigned char address1       :4;
-   unsigned char control1       :4;
-   unsigned char point1;
-   unsigned char last_track_num;
-   unsigned char dummy1;
-   unsigned char dummy2;
-   unsigned char address2       :4;
-   unsigned char control2       :4;
-   unsigned char point2;
-   unsigned char lead_out_start_msf[3];
-   struct
-   {
-      unsigned char address     :4;
-      unsigned char control     :4;
-      unsigned char track;
-      unsigned char track_start_msf[3];
-   } tracks[MAX_TRACKS];
-
-   unsigned int lead_out_start_lba;
-};
-
-struct s_sony_session_toc
-{
-   unsigned char exec_status[2];
-   unsigned char session_number;
-   unsigned char address0       :4;
-   unsigned char control0       :4;
-   unsigned char point0;
-   unsigned char first_track_num;
-   unsigned char disk_type;
-   unsigned char dummy0;
-   unsigned char address1       :4;
-   unsigned char control1       :4;
-   unsigned char point1;
-   unsigned char last_track_num;
-   unsigned char dummy1;
-   unsigned char dummy2;
-   unsigned char address2       :4;
-   unsigned char control2       :4;
-   unsigned char point2;
-   unsigned char lead_out_start_msf[3];
-   unsigned char addressb0      :4;
-   unsigned char controlb0      :4;
-   unsigned char pointb0;
-   unsigned char next_poss_prog_area_msf[3];
-   unsigned char num_mode_5_pointers;
-   unsigned char max_start_outer_leadout_msf[3];
-   unsigned char addressb1      :4;
-   unsigned char controlb1      :4;
-   unsigned char pointb1;
-   unsigned char dummyb0_1[4];
-   unsigned char num_skip_interval_pointers;
-   unsigned char num_skip_track_assignments;
-   unsigned char dummyb0_2;
-   unsigned char addressb2      :4;
-   unsigned char controlb2      :4;
-   unsigned char pointb2;
-   unsigned char tracksb2[7];
-   unsigned char addressb3      :4;
-   unsigned char controlb3      :4;
-   unsigned char pointb3;
-   unsigned char tracksb3[7];
-   unsigned char addressb4      :4;
-   unsigned char controlb4      :4;
-   unsigned char pointb4;
-   unsigned char tracksb4[7];
-   unsigned char addressc0      :4;
-   unsigned char controlc0      :4;
-   unsigned char pointc0;
-   unsigned char dummyc0[7];
-   struct
-   {
-      unsigned char address     :4;
-      unsigned char control     :4;
-      unsigned char track;
-      unsigned char track_start_msf[3];
-   } tracks[MAX_TRACKS];
-
-   unsigned int start_track_lba;
-   unsigned int lead_out_start_lba;
-   unsigned int mint;
-   unsigned int maxt;
-};
-
-struct s_all_sessions_toc
-{
-   unsigned char sessions;
-   unsigned int track_entries;
-   unsigned char first_track_num;
-   unsigned char last_track_num;
-   unsigned char disk_type;
-   unsigned char lead_out_start_msf[3];
-   struct
-   {
-      unsigned char address     :4;
-      unsigned char control     :4;
-      unsigned char track;
-      unsigned char track_start_msf[3];
-   } tracks[MAX_TRACKS];
-
-   unsigned int start_track_lba;
-   unsigned int lead_out_start_lba;
-};
-
-
-/*
- * The following are errors returned from the drive.
- */
-
-/* Command error group */
-#define SONY_ILL_CMD_ERR                0x10
-#define SONY_ILL_PARAM_ERR              0x11
-
-/* Mechanism group */
-#define SONY_NOT_LOAD_ERR               0x20
-#define SONY_NO_DISK_ERR                0x21
-#define SONY_NOT_SPIN_ERR               0x22
-#define SONY_SPIN_ERR                   0x23
-#define SONY_SPINDLE_SERVO_ERR          0x25
-#define SONY_FOCUS_SERVO_ERR            0x26
-#define SONY_EJECT_MECH_ERR             0x29
-#define SONY_AUDIO_PLAYING_ERR          0x2a
-#define SONY_EMERGENCY_EJECT_ERR        0x2c
-
-/* Seek error group */
-#define SONY_FOCUS_ERR                  0x30
-#define SONY_FRAME_SYNC_ERR             0x31
-#define SONY_SUBCODE_ADDR_ERR           0x32
-#define SONY_BLOCK_SYNC_ERR             0x33
-#define SONY_HEADER_ADDR_ERR            0x34
-
-/* Read error group */
-#define SONY_ILL_TRACK_R_ERR            0x40
-#define SONY_MODE_0_R_ERR               0x41
-#define SONY_ILL_MODE_R_ERR             0x42
-#define SONY_ILL_BLOCK_SIZE_R_ERR       0x43
-#define SONY_MODE_R_ERR                 0x44
-#define SONY_FORM_R_ERR                 0x45
-#define SONY_LEAD_OUT_R_ERR             0x46
-#define SONY_BUFFER_OVERRUN_R_ERR       0x47
-
-/* Data error group */
-#define SONY_UNREC_CIRC_ERR             0x53
-#define SONY_UNREC_LECC_ERR             0x57
-
-/* Subcode error group */
-#define SONY_NO_TOC_ERR                 0x60
-#define SONY_SUBCODE_DATA_NVAL_ERR      0x61
-#define SONY_FOCUS_ON_TOC_READ_ERR      0x63
-#define SONY_FRAME_SYNC_ON_TOC_READ_ERR 0x64
-#define SONY_TOC_DATA_ERR               0x65
-
-/* Hardware failure group */
-#define SONY_HW_FAILURE_ERR             0x70
-#define SONY_LEAD_IN_A_ERR              0x91
-#define SONY_LEAD_OUT_A_ERR             0x92
-#define SONY_DATA_TRACK_A_ERR           0x93
-
-/*
- * The following are returned from the Read With Block Error Status command.
- * They are not errors but information (Errors from the 0x5x group above may
- * also be returned
- */
-#define SONY_NO_CIRC_ERR_BLK_STAT       0x50
-#define SONY_NO_LECC_ERR_BLK_STAT       0x54
-#define SONY_RECOV_LECC_ERR_BLK_STAT    0x55
-#define SONY_NO_ERR_DETECTION_STAT      0x59
-
-/* 
- * The following is not an error returned by the drive, but by the code
- * that talks to the drive.  It is returned because of a timeout.
- */
-#define SONY_TIMEOUT_OP_ERR             0x01
-#define SONY_SIGNAL_OP_ERR              0x02
-#define SONY_BAD_DATA_ERR               0x03
-
-
-/*
- * The following are attention code for asynchronous events from the drive.
- */
-
-/* Standard attention group */
-#define SONY_EMER_EJECT_ATTN            0x2c
-#define SONY_HW_FAILURE_ATTN            0x70
-#define SONY_MECH_LOADED_ATTN           0x80
-#define SONY_EJECT_PUSHED_ATTN          0x81
-
-/* Audio attention group */
-#define SONY_AUDIO_PLAY_DONE_ATTN       0x90
-#define SONY_LEAD_IN_ERR_ATTN           0x91
-#define SONY_LEAD_OUT_ERR_ATTN          0x92
-#define SONY_DATA_TRACK_ERR_ATTN        0x93
-#define SONY_AUDIO_PLAYBACK_ERR_ATTN    0x94
-
-/* Auto spin up group */
-#define SONY_SPIN_UP_COMPLETE_ATTN      0x24
-#define SONY_SPINDLE_SERVO_ERR_ATTN     0x25
-#define SONY_FOCUS_SERVO_ERR_ATTN       0x26
-#define SONY_TOC_READ_DONE_ATTN         0x62
-#define SONY_FOCUS_ON_TOC_READ_ERR_ATTN 0x63
-#define SONY_SYNC_ON_TOC_READ_ERR_ATTN  0x65
-
-/* Auto eject group */
-#define SONY_SPIN_DOWN_COMPLETE_ATTN    0x27
-#define SONY_EJECT_COMPLETE_ATTN        0x28
-#define SONY_EJECT_MECH_ERR_ATTN        0x29
diff --git a/drivers/cdrom/cm206.c b/drivers/cdrom/cm206.c
deleted file mode 100644
index 2f8fe3b6bbd0..000000000000
--- a/drivers/cdrom/cm206.c
+++ /dev/null
@@ -1,1594 +0,0 @@
-/* cm206.c. A linux-driver for the cm206 cdrom player with cm260 adapter card.
-   Copyright (c) 1995--1997 David A. van Leeuwen.
-   $Id: cm206.c,v 1.5 1997/12/26 11:02:51 david Exp $
-   
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-     
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-     GNU General Public License for more details.
-     
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-History:
- Started 25 jan 1994. Waiting for documentation...
- 22 feb 1995: 0.1a first reasonably safe polling driver.
-	      Two major bugs, one in read_sector and one in 
-	      do_cm206_request, happened to cancel!
- 25 feb 1995: 0.2a first reasonable interrupt driven version of above.
-              uart writes are still done in polling mode. 
- 25 feb 1995: 0.21a writes also in interrupt mode, still some
-	      small bugs to be found... Larger buffer. 
-  2 mrt 1995: 0.22 Bug found (cd-> nowhere, interrupt was called in
-              initialization), read_ahead of 16. Timeouts implemented.
-	      unclear if they do something...
-  7 mrt 1995: 0.23 Start of background read-ahead.
- 18 mrt 1995: 0.24 Working background read-ahead. (still problems)
- 26 mrt 1995: 0.25 Multi-session ioctl added (kernel v1.2).
-              Statistics implemented, though separate stats206.h.
-	      Accessible through ioctl 0x1000 (just a number).
-	      Hard to choose between v1.2 development and 1.1.75.
-	      Bottom-half doesn't work with 1.2...
-	      0.25a: fixed... typo. Still problems...
-  1 apr 1995: 0.26 Module support added. Most bugs found. Use kernel 1.2.n.
-  5 apr 1995: 0.27 Auto-probe for the adapter card base address.
-              Auto-probe for the adaptor card irq line.
-  7 apr 1995: 0.28 Added lilo setup support for base address and irq.
-              Use major number 32 (not in this source), officially
-	      assigned to this driver.
-  9 apr 1995: 0.29 Added very limited audio support. Toc_header, stop, pause,
-              resume, eject. Play_track ignores track info, because we can't 
-	      read a table-of-contents entry. Toc_entry is implemented
-	      as a `placebo' function: always returns start of disc. 
-  3 may 1995: 0.30 Audio support completed. The get_toc_entry function
-              is implemented as a binary search. 
- 15 may 1995: 0.31 More work on audio stuff. Workman is not easy to 
-              satisfy; changed binary search into linear search.
-	      Auto-probe for base address somewhat relaxed.
-  1 jun 1995: 0.32 Removed probe_irq_on/off for module version.
- 10 jun 1995: 0.33 Workman still behaves funny, but you should be
-              able to eject and substitute another disc.
-
- An adaptation of 0.33 is included in linux-1.3.7 by Eberhard Moenkeberg
-
- 18 jul 1995: 0.34 Patch by Heiko Eissfeldt included, mainly considering 
-              verify_area's in the ioctls. Some bugs introduced by 
-	      EM considering the base port and irq fixed. 
-
- 18 dec 1995: 0.35 Add some code for error checking... no luck...
-
- We jump to reach our goal: version 1.0 in the next stable linux kernel.
-
- 19 mar 1996: 0.95 Different implementation of CDROM_GET_UPC, on
-	      request of Thomas Quinot. 
- 25 mar 1996: 0.96 Interpretation of opening with O_WRONLY or O_RDWR:
-	      open only for ioctl operation, e.g., for operation of
-	      tray etc.
- 4 apr 1996:  0.97 First implementation of layer between VFS and cdrom
-              driver, a generic interface. Much of the functionality
-	      of cm206_open() and cm206_ioctl() is transferred to a
-	      new file cdrom.c and its header ucdrom.h. 
-
-	      Upgrade to Linux kernel 1.3.78. 
-
- 11 apr 1996  0.98 Upgrade to Linux kernel 1.3.85
-              More code moved to cdrom.c
- 
- 	      0.99 Some more small changes to decrease number
- 	      of oopses at module load; 
- 
- 27 jul 1996  0.100 Many hours of debugging, kernel change from 1.2.13
-	      to 2.0.7 seems to have introduced some weird behavior
-	      in (interruptible_)sleep_on(&cd->data): the process
-	      seems to be woken without any explicit wake_up in my own
-	      code. Patch to try 100x in case such untriggered wake_up's 
-	      occur. 
-
- 28 jul 1996  0.101 Rewriting of the code that receives the command echo,
-	      using a fifo to store echoed bytes. 
-
- 	      Branch from 0.99:
- 
- 	      0.99.1.0 Update to kernel release 2.0.10 dev_t -> kdev_t
- 	      (emoenke) various typos found by others.  extra
- 	      module-load oops protection.
- 
- 	      0.99.1.1 Initialization constant cdrom_dops.speed
- 	      changed from float (2.0) to int (2); Cli()-sti() pair
- 	      around cm260_reset() in module initialization code.
- 
- 	      0.99.1.2 Changes literally as proposed by Scott Snyder
- 	      <snyder@d0sgif.fnal.gov> for the 2.1 kernel line, which
- 	      have to do mainly with the poor minor support i had. The
- 	      major new concept is to change a cdrom driver's
- 	      operations struct from the capabilities struct. This
- 	      reflects the fact that there is one major for a driver,
- 	      whilst there can be many minors whith completely
- 	      different capabilities.
-
-	      0.99.1.3 More changes for operations/info separation.
-
-	      0.99.1.4 Added speed selection (someone had to do this
-	      first).
-
-  23 jan 1997 0.99.1.5 MODULE_PARMS call added.
-
-  23 jan 1997 0.100.1.2--0.100.1.5 following similar lines as 
-  	      0.99.1.1--0.99.1.5. I get too many complaints about the
-	      drive making read errors. What't wrong with the 2.0+
-	      kernel line? Why get i (and othe cm206 owners) weird
-	      results? Why were things good in the good old 1.1--1.2 
-	      era? Why don't i throw away the drive?
-
- 2 feb 1997   0.102 Added `volatile' to values in cm206_struct. Seems to 
- 	      reduce many of the problems. Rewrote polling routines
-	      to use fixed delays between polls. 
-	      0.103 Changed printk behavior. 
-	      0.104 Added a 0.100 -> 0.100.1.1 change
-
-11 feb 1997   0.105 Allow auto_probe during module load, disable
-              with module option "auto_probe=0". Moved some debugging
-	      statements to lower priority. Implemented select_speed()
-	      function. 
-
-13 feb 1997   1.0 Final version for 2.0 kernel line. 
-
-	      All following changes will be for the 2.1 kernel line. 
-
-15 feb 1997   1.1 Keep up with kernel 2.1.26, merge in changes from 
-              cdrom.c 0.100.1.1--1.0. Add some more MODULE_PARMS. 
-
-14 sep 1997   1.2 Upgrade to Linux 2.1.55.  Added blksize_size[], patch
-              sent by James Bottomley <James.Bottomley@columbiasc.ncr.com>.
-
-21 dec 1997   1.4 Upgrade to Linux 2.1.72.  
-
-24 jan 1998   Removed the cm206_disc_status() function, as it was now dead
-              code.  The Uniform CDROM driver now provides this functionality.
-	      
-9 Nov. 1999   Make kernel-parameter implementation work with 2.3.x 
-	      Removed init_module & cleanup_module in favor of 
-	      module_init & module_exit.
-	      Torben Mathiasen <tmm@image.dk>
- * 
- * Parts of the code are based upon lmscd.c written by Kai Petzke,
- * sbpcd.c written by Eberhard Moenkeberg, and mcd.c by Martin
- * Harriss, but any off-the-shelf dynamic programming algorithm won't
- * be able to find them.
- *
- * The cm206 drive interface and the cm260 adapter card seem to be 
- * sufficiently different from their cm205/cm250 counterparts
- * in order to write a complete new driver.
- * 
- * I call all routines connected to the Linux kernel something
- * with `cm206' in it, as this stuff is too series-dependent. 
- * 
- * Currently, my limited knowledge is based on:
- * - The Linux Kernel Hacker's guide, v. 0.5, by Michael K. Johnson
- * - Linux Kernel Programmierung, by Michael Beck and others
- * - Philips/LMS cm206 and cm226 product specification
- * - Philips/LMS cm260 product specification
- *
- * David van Leeuwen, david@tm.tno.nl.  */
-#define REVISION "$Revision: 1.5 $"
-
-#include <linux/module.h>
-
-#include <linux/errno.h>	/* These include what we really need */
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-/* #include <linux/ucdrom.h> */
-
-#include <asm/io.h>
-
-#define MAJOR_NR CM206_CDROM_MAJOR
-
-#include <linux/blkdev.h>
-
-#undef DEBUG
-#define STATISTICS		/* record times and frequencies of events */
-#define AUTO_PROBE_MODULE
-#define USE_INSW
-
-#include "cm206.h"
-
-/* This variable defines whether or not to probe for adapter base port 
-   address and interrupt request. It can be overridden by the boot 
-   parameter `auto'.
-*/
-static int auto_probe = 1;	/* Yes, why not? */
-
-static int cm206_base = CM206_BASE;
-static int cm206_irq = CM206_IRQ;
-#ifdef MODULE
-static int cm206[2] = { 0, 0 };	/* for compatible `insmod' parameter passing */
-module_param_array(cm206, int, NULL, 0);	/* base,irq or irq,base */
-#endif
-
-module_param(cm206_base, int, 0);	/* base */
-module_param(cm206_irq, int, 0);	/* irq */
-module_param(auto_probe, bool, 0);	/* auto probe base and irq */
-MODULE_LICENSE("GPL");
-
-#define POLLOOP 100		/* milliseconds */
-#define READ_AHEAD 1		/* defines private buffer, waste! */
-#define BACK_AHEAD 1		/* defines adapter-read ahead */
-#define DATA_TIMEOUT (3*HZ)	/* measured in jiffies (10 ms) */
-#define UART_TIMEOUT (5*HZ/100)
-#define DSB_TIMEOUT (7*HZ)	/* time for the slowest command to finish */
-#define UR_SIZE 4		/* uart receive buffer fifo size */
-
-#define LINUX_BLOCK_SIZE 512	/* WHERE is this defined? */
-#define RAW_SECTOR_SIZE 2352	/* ok, is also defined in cdrom.h */
-#define ISO_SECTOR_SIZE 2048
-#define BLOCKS_ISO (ISO_SECTOR_SIZE/LINUX_BLOCK_SIZE)	/* 4 */
-#define CD_SYNC_HEAD 16		/* CD_SYNC + CD_HEAD */
-
-#ifdef STATISTICS		/* keep track of errors in counters */
-#define stats(i) { ++cd->stats[st_ ## i]; \
-		     cd->last_stat[st_ ## i] = cd->stat_counter++; \
-		 }
-#else
-#define stats(i) (void) 0;
-#endif
-
-#define Debug(a) {printk (KERN_DEBUG); printk a;}
-#ifdef DEBUG
-#define debug(a) Debug(a)
-#else
-#define debug(a) (void) 0;
-#endif
-
-typedef unsigned char uch;	/* 8-bits */
-typedef unsigned short ush;	/* 16-bits */
-
-struct toc_struct {		/* private copy of Table of Contents */
-	uch track, fsm[3], q0;
-};
-
-struct cm206_struct {
-	volatile ush intr_ds;	/* data status read on last interrupt */
-	volatile ush intr_ls;	/* uart line status read on last interrupt */
-	volatile uch ur[UR_SIZE];	/* uart receive buffer fifo */
-	volatile uch ur_w, ur_r;	/* write/read buffer index */
-	volatile uch dsb, cc;	/* drive status byte and condition (error) code */
-	int command;		/* command to be written to the uart */
-	int openfiles;
-	ush sector[READ_AHEAD * RAW_SECTOR_SIZE / 2];	/* buffered cd-sector */
-	int sector_first, sector_last;	/* range of these sectors */
-	wait_queue_head_t uart;	/* wait queues for interrupt */
-	wait_queue_head_t data;
-	struct timer_list timer;	/* time-out */
-	char timed_out;
-	signed char max_sectors;	/* number of sectors that fit in adapter mem */
-	char wait_back;		/* we're waiting for a background-read */
-	char background;	/* is a read going on in the background? */
-	int adapter_first;	/* if so, that's the starting sector */
-	int adapter_last;
-	char fifo_overflowed;
-	uch disc_status[7];	/* result of get_disc_status command */
-#ifdef STATISTICS
-	int stats[NR_STATS];
-	int last_stat[NR_STATS];	/* `time' at which stat was stat */
-	int stat_counter;
-#endif
-	struct toc_struct toc[101];	/* The whole table of contents + lead-out */
-	uch q[10];		/* Last read q-channel info */
-	uch audio_status[5];	/* last read position on pause */
-	uch media_changed;	/* record if media changed */
-};
-
-#define DISC_STATUS cd->disc_status[0]
-#define FIRST_TRACK cd->disc_status[1]
-#define LAST_TRACK cd->disc_status[2]
-#define PAUSED cd->audio_status[0]	/* misuse this memory byte! */
-#define PLAY_TO cd->toc[0]	/* toc[0] records end-time in play */
-
-static struct cm206_struct *cd;	/* the main memory structure */
-static struct request_queue *cm206_queue;
-static DEFINE_SPINLOCK(cm206_lock);
-
-/* First, we define some polling functions. These are actually
-   only being used in the initialization. */
-
-static void send_command_polled(int command)
-{
-	int loop = POLLOOP;
-	while (!(inw(r_line_status) & ls_transmitter_buffer_empty)
-	       && loop > 0) {
-		mdelay(1);	/* one millisec delay */
-		--loop;
-	}
-	outw(command, r_uart_transmit);
-}
-
-static uch receive_echo_polled(void)
-{
-	int loop = POLLOOP;
-	while (!(inw(r_line_status) & ls_receive_buffer_full) && loop > 0) {
-		mdelay(1);
-		--loop;
-	}
-	return ((uch) inw(r_uart_receive));
-}
-
-static uch send_receive_polled(int command)
-{
-	send_command_polled(command);
-	return receive_echo_polled();
-}
-
-static inline void clear_ur(void)
-{
-	if (cd->ur_r != cd->ur_w) {
-		debug(("Deleting bytes from fifo:"));
-		for (; cd->ur_r != cd->ur_w;
-		     cd->ur_r++, cd->ur_r %= UR_SIZE)
-			debug((" 0x%x", cd->ur[cd->ur_r]));
-		debug(("\n"));
-	}
-}
-
-static struct tasklet_struct cm206_tasklet;
-
-/* The interrupt handler. When the cm260 generates an interrupt, very
-   much care has to be taken in reading out the registers in the right
-   order; in case of a receive_buffer_full interrupt, first the
-   uart_receive must be read, and then the line status again to
-   de-assert the interrupt line. It took me a couple of hours to find
-   this out:-( 
-
-   The function reset_cm206 appears to cause an interrupt, because
-   pulling up the INIT line clears both the uart-write-buffer /and/
-   the uart-write-buffer-empty mask. We call this a `lost interrupt,'
-   as there seems so reason for this to happen.
-*/
-
-static irqreturn_t cm206_interrupt(int sig, void *dev_id)
-{
-	volatile ush fool;
-	cd->intr_ds = inw(r_data_status);	/* resets data_ready, data_error,
-						   crc_error, sync_error, toc_ready 
-						   interrupts */
-	cd->intr_ls = inw(r_line_status);	/* resets overrun bit */
-	debug(("Intr, 0x%x 0x%x, %d\n", cd->intr_ds, cd->intr_ls,
-	       cd->background));
-	if (cd->intr_ls & ls_attention)
-		stats(attention);
-	/* receive buffer full? */
-	if (cd->intr_ls & ls_receive_buffer_full) {
-		cd->ur[cd->ur_w] = inb(r_uart_receive);	/* get order right! */
-		cd->intr_ls = inw(r_line_status);	/* resets rbf interrupt */
-		debug(("receiving #%d: 0x%x\n", cd->ur_w,
-		       cd->ur[cd->ur_w]));
-		cd->ur_w++;
-		cd->ur_w %= UR_SIZE;
-		if (cd->ur_w == cd->ur_r)
-			debug(("cd->ur overflow!\n"));
-		if (waitqueue_active(&cd->uart) && cd->background < 2) {
-			del_timer(&cd->timer);
-			wake_up_interruptible(&cd->uart);
-		}
-	}
-	/* data ready in fifo? */
-	else if (cd->intr_ds & ds_data_ready) {
-		if (cd->background)
-			++cd->adapter_last;
-		if (waitqueue_active(&cd->data)
-		    && (cd->wait_back || !cd->background)) {
-			del_timer(&cd->timer);
-			wake_up_interruptible(&cd->data);
-		}
-		stats(data_ready);
-	}
-	/* ready to issue a write command? */
-	else if (cd->command && cd->intr_ls & ls_transmitter_buffer_empty) {
-		outw(dc_normal | (inw(r_data_status) & 0x7f),
-		     r_data_control);
-		outw(cd->command, r_uart_transmit);
-		cd->command = 0;
-		if (!cd->background)
-			wake_up_interruptible(&cd->uart);
-	}
-	/* now treat errors (at least, identify them for debugging) */
-	else if (cd->intr_ds & ds_fifo_overflow) {
-		debug(("Fifo overflow at sectors 0x%x\n",
-		       cd->sector_first));
-		fool = inw(r_fifo_output_buffer);	/* de-assert the interrupt */
-		cd->fifo_overflowed = 1;	/* signal one word less should be read */
-		stats(fifo_overflow);
-	} else if (cd->intr_ds & ds_data_error) {
-		debug(("Data error at sector 0x%x\n", cd->sector_first));
-		stats(data_error);
-	} else if (cd->intr_ds & ds_crc_error) {
-		debug(("CRC error at sector 0x%x\n", cd->sector_first));
-		stats(crc_error);
-	} else if (cd->intr_ds & ds_sync_error) {
-		debug(("Sync at sector 0x%x\n", cd->sector_first));
-		stats(sync_error);
-	} else if (cd->intr_ds & ds_toc_ready) {
-		/* do something appropriate */
-	}
-	/* couldn't see why this interrupt, maybe due to init */
-	else {
-		outw(dc_normal | READ_AHEAD, r_data_control);
-		stats(lost_intr);
-	}
-	if (cd->background
-	    && (cd->adapter_last - cd->adapter_first == cd->max_sectors
-		|| cd->fifo_overflowed))
-		tasklet_schedule(&cm206_tasklet);	/* issue a stop read command */
-	stats(interrupt);
-	return IRQ_HANDLED;
-}
-
-/* we have put the address of the wait queue in who */
-static void cm206_timeout(unsigned long who)
-{
-	cd->timed_out = 1;
-	debug(("Timing out\n"));
-	wake_up_interruptible((wait_queue_head_t *) who);
-}
-
-/* This function returns 1 if a timeout occurred, 0 if an interrupt
-   happened */
-static int sleep_or_timeout(wait_queue_head_t * wait, int timeout)
-{
-	cd->timed_out = 0;
-	init_timer(&cd->timer);
-	cd->timer.data = (unsigned long) wait;
-	cd->timer.expires = jiffies + timeout;
-	add_timer(&cd->timer);
-	debug(("going to sleep\n"));
-	interruptible_sleep_on(wait);
-	del_timer(&cd->timer);
-	if (cd->timed_out) {
-		cd->timed_out = 0;
-		return 1;
-	} else
-		return 0;
-}
-
-static void send_command(int command)
-{
-	debug(("Sending 0x%x\n", command));
-	if (!(inw(r_line_status) & ls_transmitter_buffer_empty)) {
-		cd->command = command;
-		cli();		/* don't interrupt before sleep */
-		outw(dc_mask_sync_error | dc_no_stop_on_error |
-		     (inw(r_data_status) & 0x7f), r_data_control);
-		/* interrupt routine sends command */
-		if (sleep_or_timeout(&cd->uart, UART_TIMEOUT)) {
-			debug(("Time out on write-buffer\n"));
-			stats(write_timeout);
-			outw(command, r_uart_transmit);
-		}
-		debug(("Write commmand delayed\n"));
-	} else
-		outw(command, r_uart_transmit);
-}
-
-static uch receive_byte(int timeout)
-{
-	uch ret;
-	cli();
-	debug(("cli\n"));
-	ret = cd->ur[cd->ur_r];
-	if (cd->ur_r != cd->ur_w) {
-		sti();
-		debug(("returning #%d: 0x%x\n", cd->ur_r,
-		       cd->ur[cd->ur_r]));
-		cd->ur_r++;
-		cd->ur_r %= UR_SIZE;
-		return ret;
-	} else if (sleep_or_timeout(&cd->uart, timeout)) {	/* does sti() */
-		debug(("Time out on receive-buffer\n"));
-#ifdef STATISTICS
-		if (timeout == UART_TIMEOUT)
-			stats(receive_timeout)	/* no `;'! */
-			    else
-			stats(dsb_timeout);
-#endif
-		return 0xda;
-	}
-	ret = cd->ur[cd->ur_r];
-	debug(("slept; returning #%d: 0x%x\n", cd->ur_r,
-	       cd->ur[cd->ur_r]));
-	cd->ur_r++;
-	cd->ur_r %= UR_SIZE;
-	return ret;
-}
-
-static inline uch receive_echo(void)
-{
-	return receive_byte(UART_TIMEOUT);
-}
-
-static inline uch send_receive(int command)
-{
-	send_command(command);
-	return receive_echo();
-}
-
-static inline uch wait_dsb(void)
-{
-	return receive_byte(DSB_TIMEOUT);
-}
-
-static int type_0_command(int command, int expect_dsb)
-{
-	int e;
-	clear_ur();
-	if (command != (e = send_receive(command))) {
-		debug(("command 0x%x echoed as 0x%x\n", command, e));
-		stats(echo);
-		return -1;
-	}
-	if (expect_dsb) {
-		cd->dsb = wait_dsb();	/* wait for command to finish */
-	}
-	return 0;
-}
-
-static int type_1_command(int command, int bytes, uch * status)
-{				/* returns info */
-	int i;
-	if (type_0_command(command, 0))
-		return -1;
-	for (i = 0; i < bytes; i++)
-		status[i] = send_receive(c_gimme);
-	return 0;
-}
-
-/* This function resets the adapter card. We'd better not do this too
- * often, because it tends to generate `lost interrupts.' */
-static void reset_cm260(void)
-{
-	outw(dc_normal | dc_initialize | READ_AHEAD, r_data_control);
-	udelay(10);		/* 3.3 mu sec minimum */
-	outw(dc_normal | READ_AHEAD, r_data_control);
-}
-
-/* fsm: frame-sec-min from linear address; one of many */
-static void fsm(int lba, uch * fsm)
-{
-	fsm[0] = lba % 75;
-	lba /= 75;
-	lba += 2;
-	fsm[1] = lba % 60;
-	fsm[2] = lba / 60;
-}
-
-static inline int fsm2lba(uch * fsm)
-{
-	return fsm[0] + 75 * (fsm[1] - 2 + 60 * fsm[2]);
-}
-
-static inline int f_s_m2lba(uch f, uch s, uch m)
-{
-	return f + 75 * (s - 2 + 60 * m);
-}
-
-static int start_read(int start)
-{
-	uch read_sector[4] = { c_read_data, };
-	int i, e;
-
-	fsm(start, &read_sector[1]);
-	clear_ur();
-	for (i = 0; i < 4; i++)
-		if (read_sector[i] != (e = send_receive(read_sector[i]))) {
-			debug(("read_sector: %x echoes %x\n",
-			       read_sector[i], e));
-			stats(echo);
-			if (e == 0xff) {	/* this seems to happen often */
-				e = receive_echo();
-				debug(("Second try %x\n", e));
-				if (e != read_sector[i])
-					return -1;
-			}
-		}
-	return 0;
-}
-
-static int stop_read(void)
-{
-	int e;
-	type_0_command(c_stop, 0);
-	if ((e = receive_echo()) != 0xff) {
-		debug(("c_stop didn't send 0xff, but 0x%x\n", e));
-		stats(stop_0xff);
-		return -1;
-	}
-	return 0;
-}
-
-/* This function starts to read sectors in adapter memory, the
-   interrupt routine should stop the read. In fact, the bottom_half
-   routine takes care of this. Set a flag `background' in the cd
-   struct to indicate the process. */
-
-static int read_background(int start, int reading)
-{
-	if (cd->background)
-		return -1;	/* can't do twice */
-	outw(dc_normal | BACK_AHEAD, r_data_control);
-	if (!reading && start_read(start))
-		return -2;
-	cd->adapter_first = cd->adapter_last = start;
-	cd->background = 1;	/* flag a read is going on */
-	return 0;
-}
-
-#ifdef USE_INSW
-#define transport_data insw
-#else
-/* this routine implements insw(,,). There was a time i had the
-   impression that there would be any difference in error-behaviour. */
-void transport_data(int port, ush * dest, int count)
-{
-	int i;
-	ush *d;
-	for (i = 0, d = dest; i < count; i++, d++)
-		*d = inw(port);
-}
-#endif
-
-
-#define MAX_TRIES 100
-static int read_sector(int start)
-{
-	int tries = 0;
-	if (cd->background) {
-		cd->background = 0;
-		cd->adapter_last = -1;	/* invalidate adapter memory */
-		stop_read();
-	}
-	cd->fifo_overflowed = 0;
-	reset_cm260();		/* empty fifo etc. */
-	if (start_read(start))
-		return -1;
-	do {
-		if (sleep_or_timeout(&cd->data, DATA_TIMEOUT)) {
-			debug(("Read timed out sector 0x%x\n", start));
-			stats(read_timeout);
-			stop_read();
-			return -3;
-		}
-		tries++;
-	} while (cd->intr_ds & ds_fifo_empty && tries < MAX_TRIES);
-	if (tries > 1)
-		debug(("Took me some tries\n"))
-		    else
-	if (tries == MAX_TRIES)
-		debug(("MAX_TRIES tries for read sector\n"));
-	transport_data(r_fifo_output_buffer, cd->sector,
-		       READ_AHEAD * RAW_SECTOR_SIZE / 2);
-	if (read_background(start + READ_AHEAD, 1))
-		stats(read_background);
-	cd->sector_first = start;
-	cd->sector_last = start + READ_AHEAD;
-	stats(read_restarted);
-	return 0;
-}
-
-/* The function of bottom-half is to send a stop command to the drive
-   This isn't easy because the routine is not `owned' by any process;
-   we can't go to sleep! The variable cd->background gives the status:
-   0 no read pending
-   1 a read is pending
-   2 c_stop waits for write_buffer_empty
-   3 c_stop waits for receive_buffer_full: echo
-   4 c_stop waits for receive_buffer_full: 0xff
-*/
-
-static void cm206_tasklet_func(unsigned long ignore)
-{
-	debug(("bh: %d\n", cd->background));
-	switch (cd->background) {
-	case 1:
-		stats(bh);
-		if (!(cd->intr_ls & ls_transmitter_buffer_empty)) {
-			cd->command = c_stop;
-			outw(dc_mask_sync_error | dc_no_stop_on_error |
-			     (inw(r_data_status) & 0x7f), r_data_control);
-			cd->background = 2;
-			break;	/* we'd better not time-out here! */
-		} else
-			outw(c_stop, r_uart_transmit);
-		/* fall into case 2: */
-	case 2:
-		/* the write has been satisfied by interrupt routine */
-		cd->background = 3;
-		break;
-	case 3:
-		if (cd->ur_r != cd->ur_w) {
-			if (cd->ur[cd->ur_r] != c_stop) {
-				debug(("cm206_bh: c_stop echoed 0x%x\n",
-				       cd->ur[cd->ur_r]));
-				stats(echo);
-			}
-			cd->ur_r++;
-			cd->ur_r %= UR_SIZE;
-		}
-		cd->background++;
-		break;
-	case 4:
-		if (cd->ur_r != cd->ur_w) {
-			if (cd->ur[cd->ur_r] != 0xff) {
-				debug(("cm206_bh: c_stop reacted with 0x%x\n", cd->ur[cd->ur_r]));
-				stats(stop_0xff);
-			}
-			cd->ur_r++;
-			cd->ur_r %= UR_SIZE;
-		}
-		cd->background = 0;
-	}
-}
-
-static DECLARE_TASKLET(cm206_tasklet, cm206_tasklet_func, 0);
-
-/* This command clears the dsb_possible_media_change flag, so we must 
- * retain it.
- */
-static void get_drive_status(void)
-{
-	uch status[2];
-	type_1_command(c_drive_status, 2, status);	/* this might be done faster */
-	cd->dsb = status[0];
-	cd->cc = status[1];
-	cd->media_changed |=
-	    !!(cd->dsb & (dsb_possible_media_change |
-			  dsb_drive_not_ready | dsb_tray_not_closed));
-}
-
-static void get_disc_status(void)
-{
-	if (type_1_command(c_disc_status, 7, cd->disc_status)) {
-		debug(("get_disc_status: error\n"));
-	}
-}
-
-/* The new open. The real opening strategy is defined in cdrom.c. */
-
-static int cm206_open(struct cdrom_device_info *cdi, int purpose)
-{
-	if (!cd->openfiles) {	/* reset only first time */
-		cd->background = 0;
-		reset_cm260();
-		cd->adapter_last = -1;	/* invalidate adapter memory */
-		cd->sector_last = -1;
-	}
-	++cd->openfiles;
-	stats(open);
-	return 0;
-}
-
-static void cm206_release(struct cdrom_device_info *cdi)
-{
-	if (cd->openfiles == 1) {
-		if (cd->background) {
-			cd->background = 0;
-			stop_read();
-		}
-		cd->sector_last = -1;	/* Make our internal buffer invalid */
-		FIRST_TRACK = 0;	/* No valid disc status */
-	}
-	--cd->openfiles;
-}
-
-/* Empty buffer empties $sectors$ sectors of the adapter card buffer,
- * and then reads a sector in kernel memory.  */
-static void empty_buffer(int sectors)
-{
-	while (sectors >= 0) {
-		transport_data(r_fifo_output_buffer,
-			       cd->sector + cd->fifo_overflowed,
-			       RAW_SECTOR_SIZE / 2 - cd->fifo_overflowed);
-		--sectors;
-		++cd->adapter_first;	/* update the current adapter sector */
-		cd->fifo_overflowed = 0;	/* reset overflow bit */
-		stats(sector_transferred);
-	}
-	cd->sector_first = cd->adapter_first - 1;
-	cd->sector_last = cd->adapter_first;	/* update the buffer sector */
-}
-
-/* try_adapter. This function determines if the requested sector is
-   in adapter memory, or will appear there soon. Returns 0 upon
-   success */
-static int try_adapter(int sector)
-{
-	if (cd->adapter_first <= sector && sector < cd->adapter_last) {
-		/* sector is in adapter memory */
-		empty_buffer(sector - cd->adapter_first);
-		return 0;
-	} else if (cd->background == 1 && cd->adapter_first <= sector
-		   && sector < cd->adapter_first + cd->max_sectors) {
-		/* a read is going on, we can wait for it */
-		cd->wait_back = 1;
-		while (sector >= cd->adapter_last) {
-			if (sleep_or_timeout(&cd->data, DATA_TIMEOUT)) {
-				debug(("Timed out during background wait: %d %d %d %d\n", sector, cd->adapter_last, cd->adapter_first, cd->background));
-				stats(back_read_timeout);
-				cd->wait_back = 0;
-				return -1;
-			}
-		}
-		cd->wait_back = 0;
-		empty_buffer(sector - cd->adapter_first);
-		return 0;
-	} else
-		return -2;
-}
-
-/* This is not a very smart implementation. We could optimize for 
-   consecutive block numbers. I'm not convinced this would really
-   bring down the processor load. */
-static void do_cm206_request(request_queue_t * q)
-{
-	long int i, cd_sec_no;
-	int quarter, error;
-	uch *source, *dest;
-	struct request *req;
-
-	while (1) {	/* repeat until all requests have been satisfied */
-		req = elv_next_request(q);
-		if (!req)
-			return;
-
-		if (rq_data_dir(req) != READ) {
-			debug(("Non-read command %d on cdrom\n", req->cmd));
-			end_request(req, 0);
-			continue;
-		}
-		spin_unlock_irq(q->queue_lock);
-		error = 0;
-		for (i = 0; i < req->nr_sectors; i++) {
-			int e1, e2;
-			cd_sec_no = (req->sector + i) / BLOCKS_ISO;	/* 4 times 512 bytes */
-			quarter = (req->sector + i) % BLOCKS_ISO;
-			dest = req->buffer + i * LINUX_BLOCK_SIZE;
-			/* is already in buffer memory? */
-			if (cd->sector_first <= cd_sec_no
-			    && cd_sec_no < cd->sector_last) {
-				source =
-				    ((uch *) cd->sector) + 16 +
-				    quarter * LINUX_BLOCK_SIZE +
-				    (cd_sec_no -
-				     cd->sector_first) * RAW_SECTOR_SIZE;
-				memcpy(dest, source, LINUX_BLOCK_SIZE);
-			} else if (!(e1 = try_adapter(cd_sec_no)) ||
-				   !(e2 = read_sector(cd_sec_no))) {
-				source =
-				    ((uch *) cd->sector) + 16 +
-				    quarter * LINUX_BLOCK_SIZE;
-				memcpy(dest, source, LINUX_BLOCK_SIZE);
-			} else {
-				error = 1;
-				debug(("cm206_request: %d %d\n", e1, e2));
-			}
-		}
-		spin_lock_irq(q->queue_lock);
-		end_request(req, !error);
-	}
-}
-
-/* Audio support. I've tried very hard, but the cm206 drive doesn't 
-   seem to have a get_toc (table-of-contents) function, while i'm
-   pretty sure it must read the toc upon disc insertion. Therefore
-   this function has been implemented through a binary search 
-   strategy. All track starts that happen to be found are stored in
-   cd->toc[], for future use. 
-
-   I've spent a whole day on a bug that only shows under Workman---
-   I don't get it. Tried everything, nothing works. If workman asks
-   for track# 0xaa, it'll get the wrong time back. Any other program
-   receives the correct value. I'm stymied.
-*/
-
-/* seek seeks to address lba. It does wait to arrive there. */
-static void seek(int lba)
-{
-	int i;
-	uch seek_command[4] = { c_seek, };
-
-	fsm(lba, &seek_command[1]);
-	for (i = 0; i < 4; i++)
-		type_0_command(seek_command[i], 0);
-	cd->dsb = wait_dsb();
-}
-
-static uch bcdbin(unsigned char bcd)
-{				/* stolen from mcd.c! */
-	return (bcd >> 4) * 10 + (bcd & 0xf);
-}
-
-static inline uch normalize_track(uch track)
-{
-	if (track < 1)
-		return 1;
-	if (track > LAST_TRACK)
-		return LAST_TRACK + 1;
-	return track;
-}
-
-/* This function does a binary search for track start. It records all
- * tracks seen in the process. Input $track$ must be between 1 and
- * #-of-tracks+1.  Note that the start of the disc must be in toc[1].fsm. 
- */
-static int get_toc_lba(uch track)
-{
-	int max = 74 * 60 * 75 - 150, min = fsm2lba(cd->toc[1].fsm);
-	int i, lba, l, old_lba = 0;
-	uch *q = cd->q;
-	uch ct;			/* current track */
-	int binary = 0;
-	const int skip = 3 * 60 * 75;	/* 3 minutes */
-
-	for (i = track; i > 0; i--)
-		if (cd->toc[i].track) {
-			min = fsm2lba(cd->toc[i].fsm);
-			break;
-		}
-	lba = min + skip;
-	do {
-		seek(lba);
-		type_1_command(c_read_current_q, 10, q);
-		ct = normalize_track(q[1]);
-		if (!cd->toc[ct].track) {
-			l = q[9] - bcdbin(q[5]) + 75 * (q[8] -
-							bcdbin(q[4]) - 2 +
-							60 * (q[7] -
-							      bcdbin(q
-								     [3])));
-			cd->toc[ct].track = q[1];	/* lead out still 0xaa */
-			fsm(l, cd->toc[ct].fsm);
-			cd->toc[ct].q0 = q[0];	/* contains adr and ctrl info */
-			if (ct == track)
-				return l;
-		}
-		old_lba = lba;
-		if (binary) {
-			if (ct < track)
-				min = lba;
-			else
-				max = lba;
-			lba = (min + max) / 2;
-		} else {
-			if (ct < track)
-				lba += skip;
-			else {
-				binary = 1;
-				max = lba;
-				min = lba - skip;
-				lba = (min + max) / 2;
-			}
-		}
-	} while (lba != old_lba);
-	return lba;
-}
-
-static void update_toc_entry(uch track)
-{
-	track = normalize_track(track);
-	if (!cd->toc[track].track)
-		get_toc_lba(track);
-}
-
-/* return 0 upon success */
-static int read_toc_header(struct cdrom_tochdr *hp)
-{
-	if (!FIRST_TRACK)
-		get_disc_status();
-	if (hp) {
-		int i;
-		hp->cdth_trk0 = FIRST_TRACK;
-		hp->cdth_trk1 = LAST_TRACK;
-		/* fill in first track position */
-		for (i = 0; i < 3; i++)
-			cd->toc[1].fsm[i] = cd->disc_status[3 + i];
-		update_toc_entry(LAST_TRACK + 1);	/* find most entries */
-		return 0;
-	}
-	return -1;
-}
-
-static void play_from_to_msf(struct cdrom_msf *msfp)
-{
-	uch play_command[] = { c_play,
-		msfp->cdmsf_frame0, msfp->cdmsf_sec0, msfp->cdmsf_min0,
-		msfp->cdmsf_frame1, msfp->cdmsf_sec1, msfp->cdmsf_min1, 2,
-		    2
-	};
-	int i;
-	for (i = 0; i < 9; i++)
-		type_0_command(play_command[i], 0);
-	for (i = 0; i < 3; i++)
-		PLAY_TO.fsm[i] = play_command[i + 4];
-	PLAY_TO.track = 0;	/* say no track end */
-	cd->dsb = wait_dsb();
-}
-
-static void play_from_to_track(int from, int to)
-{
-	uch play_command[8] = { c_play, };
-	int i;
-
-	if (from == 0) {	/* continue paused play */
-		for (i = 0; i < 3; i++) {
-			play_command[i + 1] = cd->audio_status[i + 2];
-			play_command[i + 4] = PLAY_TO.fsm[i];
-		}
-	} else {
-		update_toc_entry(from);
-		update_toc_entry(to + 1);
-		for (i = 0; i < 3; i++) {
-			play_command[i + 1] = cd->toc[from].fsm[i];
-			PLAY_TO.fsm[i] = play_command[i + 4] =
-			    cd->toc[to + 1].fsm[i];
-		}
-		PLAY_TO.track = to;
-	}
-	for (i = 0; i < 7; i++)
-		type_0_command(play_command[i], 0);
-	for (i = 0; i < 2; i++)
-		type_0_command(0x2, 0);	/* volume */
-	cd->dsb = wait_dsb();
-}
-
-static int get_current_q(struct cdrom_subchnl *qp)
-{
-	int i;
-	uch *q = cd->q;
-	if (type_1_command(c_read_current_q, 10, q))
-		return 0;
-/*  q[0] = bcdbin(q[0]); Don't think so! */
-	for (i = 2; i < 6; i++)
-		q[i] = bcdbin(q[i]);
-	qp->cdsc_adr = q[0] & 0xf;
-	qp->cdsc_ctrl = q[0] >> 4;	/* from mcd.c */
-	qp->cdsc_trk = q[1];
-	qp->cdsc_ind = q[2];
-	if (qp->cdsc_format == CDROM_MSF) {
-		qp->cdsc_reladdr.msf.minute = q[3];
-		qp->cdsc_reladdr.msf.second = q[4];
-		qp->cdsc_reladdr.msf.frame = q[5];
-		qp->cdsc_absaddr.msf.minute = q[7];
-		qp->cdsc_absaddr.msf.second = q[8];
-		qp->cdsc_absaddr.msf.frame = q[9];
-	} else {
-		qp->cdsc_reladdr.lba = f_s_m2lba(q[5], q[4], q[3]);
-		qp->cdsc_absaddr.lba = f_s_m2lba(q[9], q[8], q[7]);
-	}
-	get_drive_status();
-	if (cd->dsb & dsb_play_in_progress)
-		qp->cdsc_audiostatus = CDROM_AUDIO_PLAY;
-	else if (PAUSED)
-		qp->cdsc_audiostatus = CDROM_AUDIO_PAUSED;
-	else
-		qp->cdsc_audiostatus = CDROM_AUDIO_NO_STATUS;
-	return 0;
-}
-
-static void invalidate_toc(void)
-{
-	memset(cd->toc, 0, sizeof(cd->toc));
-	memset(cd->disc_status, 0, sizeof(cd->disc_status));
-}
-
-/* cdrom.c guarantees that cdte_format == CDROM_MSF */
-static void get_toc_entry(struct cdrom_tocentry *ep)
-{
-	uch track = normalize_track(ep->cdte_track);
-	update_toc_entry(track);
-	ep->cdte_addr.msf.frame = cd->toc[track].fsm[0];
-	ep->cdte_addr.msf.second = cd->toc[track].fsm[1];
-	ep->cdte_addr.msf.minute = cd->toc[track].fsm[2];
-	ep->cdte_adr = cd->toc[track].q0 & 0xf;
-	ep->cdte_ctrl = cd->toc[track].q0 >> 4;
-	ep->cdte_datamode = 0;
-}
-
-/* Audio ioctl.  Ioctl commands connected to audio are in such an
- * idiosyncratic i/o format, that we leave these untouched. Return 0
- * upon success. Memory checking has been done by cdrom_ioctl(), the
- * calling function, as well as LBA/MSF sanitization.
-*/
-static int cm206_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
-			     void *arg)
-{
-	switch (cmd) {
-	case CDROMREADTOCHDR:
-		return read_toc_header((struct cdrom_tochdr *) arg);
-	case CDROMREADTOCENTRY:
-		get_toc_entry((struct cdrom_tocentry *) arg);
-		return 0;
-	case CDROMPLAYMSF:
-		play_from_to_msf((struct cdrom_msf *) arg);
-		return 0;
-	case CDROMPLAYTRKIND:	/* admittedly, not particularly beautiful */
-		play_from_to_track(((struct cdrom_ti *) arg)->cdti_trk0,
-				   ((struct cdrom_ti *) arg)->cdti_trk1);
-		return 0;
-	case CDROMSTOP:
-		PAUSED = 0;
-		if (cd->dsb & dsb_play_in_progress)
-			return type_0_command(c_stop, 1);
-		else
-			return 0;
-	case CDROMPAUSE:
-		get_drive_status();
-		if (cd->dsb & dsb_play_in_progress) {
-			type_0_command(c_stop, 1);
-			type_1_command(c_audio_status, 5,
-				       cd->audio_status);
-			PAUSED = 1;	/* say we're paused */
-		}
-		return 0;
-	case CDROMRESUME:
-		if (PAUSED)
-			play_from_to_track(0, 0);
-		PAUSED = 0;
-		return 0;
-	case CDROMSTART:
-	case CDROMVOLCTRL:
-		return 0;
-	case CDROMSUBCHNL:
-		return get_current_q((struct cdrom_subchnl *) arg);
-	default:
-		return -EINVAL;
-	}
-}
-
-static int cm206_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-{
-	if (cd != NULL) {
-		int r;
-		get_drive_status();	/* ensure cd->media_changed OK */
-		r = cd->media_changed;
-		cd->media_changed = 0;	/* clear bit */
-		return r;
-	} else
-		return -EIO;
-}
-
-/* The new generic cdrom support. Routines should be concise, most of
-   the logic should be in cdrom.c */
-
-
-/* controls tray movement */
-static int cm206_tray_move(struct cdrom_device_info *cdi, int position)
-{
-	if (position) {		/* 1: eject */
-		type_0_command(c_open_tray, 1);
-		invalidate_toc();
-	} else
-		type_0_command(c_close_tray, 1);	/* 0: close */
-	return 0;
-}
-
-/* gives current state of the drive */
-static int cm206_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
-	get_drive_status();
-	if (cd->dsb & dsb_tray_not_closed)
-		return CDS_TRAY_OPEN;
-	if (!(cd->dsb & dsb_disc_present))
-		return CDS_NO_DISC;
-	if (cd->dsb & dsb_drive_not_ready)
-		return CDS_DRIVE_NOT_READY;
-	return CDS_DISC_OK;
-}
-
-/* locks or unlocks door lock==1: lock; return 0 upon success */
-static int cm206_lock_door(struct cdrom_device_info *cdi, int lock)
-{
-	uch command = (lock) ? c_lock_tray : c_unlock_tray;
-	type_0_command(command, 1);	/* wait and get dsb */
-	/* the logic calculates the success, 0 means successful */
-	return lock ^ ((cd->dsb & dsb_tray_locked) != 0);
-}
-
-/* Although a session start should be in LBA format, we return it in 
-   MSF format because it is slightly easier, and the new generic ioctl
-   will take care of the necessary conversion. */
-static int cm206_get_last_session(struct cdrom_device_info *cdi,
-				  struct cdrom_multisession *mssp)
-{
-	if (!FIRST_TRACK)
-		get_disc_status();
-	if (mssp != NULL) {
-		if (DISC_STATUS & cds_multi_session) {	/* multi-session */
-			mssp->addr.msf.frame = cd->disc_status[3];
-			mssp->addr.msf.second = cd->disc_status[4];
-			mssp->addr.msf.minute = cd->disc_status[5];
-			mssp->addr_format = CDROM_MSF;
-			mssp->xa_flag = 1;
-		} else {
-			mssp->xa_flag = 0;
-		}
-		return 1;
-	}
-	return 0;
-}
-
-static int cm206_get_upc(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
-	uch upc[10];
-	char *ret = mcn->medium_catalog_number;
-	int i;
-
-	if (type_1_command(c_read_upc, 10, upc))
-		return -EIO;
-	for (i = 0; i < 13; i++) {
-		int w = i / 2 + 1, r = i % 2;
-		if (r)
-			ret[i] = 0x30 | (upc[w] & 0x0f);
-		else
-			ret[i] = 0x30 | ((upc[w] >> 4) & 0x0f);
-	}
-	ret[13] = '\0';
-	return 0;
-}
-
-static int cm206_reset(struct cdrom_device_info *cdi)
-{
-	stop_read();
-	reset_cm260();
-	outw(dc_normal | dc_break | READ_AHEAD, r_data_control);
-	mdelay(1);		/* 750 musec minimum */
-	outw(dc_normal | READ_AHEAD, r_data_control);
-	cd->sector_last = -1;	/* flag no data buffered */
-	cd->adapter_last = -1;
-	invalidate_toc();
-	return 0;
-}
-
-static int cm206_select_speed(struct cdrom_device_info *cdi, int speed)
-{
-	int r;
-	switch (speed) {
-	case 0:
-		r = type_0_command(c_auto_mode, 1);
-		break;
-	case 1:
-		r = type_0_command(c_force_1x, 1);
-		break;
-	case 2:
-		r = type_0_command(c_force_2x, 1);
-		break;
-	default:
-		return -1;
-	}
-	if (r < 0)
-		return r;
-	else
-		return 1;
-}
-
-static struct cdrom_device_ops cm206_dops = {
-	.open			= cm206_open,
-	.release		= cm206_release,
-	.drive_status		= cm206_drive_status,
-	.media_changed		= cm206_media_changed,
-	.tray_move		= cm206_tray_move,
-	.lock_door		= cm206_lock_door,
-	.select_speed		= cm206_select_speed,
-	.get_last_session	= cm206_get_last_session,
-	.get_mcn		= cm206_get_upc,
-	.reset			= cm206_reset,
-	.audio_ioctl		= cm206_audio_ioctl,
-	.capability		= CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
-				  CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
-				  CDC_MCN | CDC_PLAY_AUDIO | CDC_SELECT_SPEED |
-				  CDC_DRIVE_STATUS,
-	.n_minors		= 1,
-};
-
-
-static struct cdrom_device_info cm206_info = {
-	.ops		= &cm206_dops,
-	.speed		= 2,
-	.capacity	= 1,
-	.name		= "cm206",
-};
-
-static int cm206_block_open(struct inode *inode, struct file *file)
-{
-	return cdrom_open(&cm206_info, inode, file);
-}
-
-static int cm206_block_release(struct inode *inode, struct file *file)
-{
-	return cdrom_release(&cm206_info, file);
-}
-
-static int cm206_block_ioctl(struct inode *inode, struct file *file,
-				unsigned cmd, unsigned long arg)
-{
-	switch (cmd) {
-#ifdef STATISTICS
-	case CM206CTL_GET_STAT:
-		if (arg >= NR_STATS)
-			return -EINVAL;
-		return cd->stats[arg];
-	case CM206CTL_GET_LAST_STAT:
-		if (arg >= NR_STATS)
-			return -EINVAL;
-		return cd->last_stat[arg];
-#endif
-	default:
-		break;
-	}
-
-	return cdrom_ioctl(file, &cm206_info, inode, cmd, arg);
-}
-
-static int cm206_block_media_changed(struct gendisk *disk)
-{
-	return cdrom_media_changed(&cm206_info);
-}
-
-static struct block_device_operations cm206_bdops =
-{
-	.owner		= THIS_MODULE,
-	.open		= cm206_block_open,
-	.release	= cm206_block_release,
-	.ioctl		= cm206_block_ioctl,
-	.media_changed	= cm206_block_media_changed,
-};
-
-static struct gendisk *cm206_gendisk;
-
-/* This function probes for the adapter card. It returns the base
-   address if it has found the adapter card. One can specify a base 
-   port to probe specifically, or 0 which means span all possible
-   bases. 
-
-   Linus says it is too dangerous to use writes for probing, so we
-   stick with pure reads for a while. Hope that 8 possible ranges,
-   request_region, 15 bits of one port and 6 of another make things
-   likely enough to accept the region on the first hit...
- */
-static int __init probe_base_port(int base)
-{
-	int b = 0x300, e = 0x370;	/* this is the range of start addresses */
-	volatile int fool, i;
-
-	if (base)
-		b = e = base;
-	for (base = b; base <= e; base += 0x10) {
-		if (!request_region(base, 0x10,"cm206"))
-			continue;
-		for (i = 0; i < 3; i++)
-			fool = inw(base + 2);	/* empty possibly uart_receive_buffer */
-		if ((inw(base + 6) & 0xffef) != 0x0001 ||	/* line_status */
-		    (inw(base) & 0xad00) != 0)	{ /* data status */
-		    	release_region(base,0x10);
-			continue;
-		}
-		return (base);
-	}
-	return 0;
-}
-
-#if !defined(MODULE) || defined(AUTO_PROBE_MODULE)
-/* Probe for irq# nr. If nr==0, probe for all possible irq's. */
-static int __init probe_irq(int nr)
-{
-	int irqs, irq;
-	outw(dc_normal | READ_AHEAD, r_data_control);	/* disable irq-generation */
-	sti();
-	irqs = probe_irq_on();
-	reset_cm260();		/* causes interrupt */
-	udelay(100);		/* wait for it */
-	irq = probe_irq_off(irqs);
-	outw(dc_normal | READ_AHEAD, r_data_control);	/* services interrupt */
-	if (nr && irq != nr && irq > 0)
-		return 0;	/* wrong interrupt happened */
-	else
-		return irq;
-}
-#endif
-
-int __init cm206_init(void)
-{
-	uch e = 0;
-	long int size = sizeof(struct cm206_struct);
-	struct gendisk *disk;
-
-	printk(KERN_INFO "cm206 cdrom driver " REVISION);
-	cm206_base = probe_base_port(auto_probe ? 0 : cm206_base);
-	if (!cm206_base) {
-		printk(" can't find adapter!\n");
-		return -EIO;
-	}
-	printk(" adapter at 0x%x", cm206_base);
-	cd = kmalloc(size, GFP_KERNEL);
-	if (!cd)
-               goto out_base;
-	/* Now we have found the adaptor card, try to reset it. As we have
-	 * found out earlier, this process generates an interrupt as well,
-	 * so we might just exploit that fact for irq probing! */
-#if !defined(MODULE) || defined(AUTO_PROBE_MODULE)
-	cm206_irq = probe_irq(auto_probe ? 0 : cm206_irq);
-	if (cm206_irq <= 0) {
-		printk("can't find IRQ!\n");
-		goto out_probe;
-	} else
-		printk(" IRQ %d found\n", cm206_irq);
-#else
-	cli();
-	reset_cm260();
-	/* Now, the problem here is that reset_cm260 can generate an
-	   interrupt. It seems that this can cause a kernel oops some time
-	   later. So we wait a while and `service' this interrupt. */
-	mdelay(1);
-	outw(dc_normal | READ_AHEAD, r_data_control);
-	sti();
-	printk(" using IRQ %d\n", cm206_irq);
-#endif
-	if (send_receive_polled(c_drive_configuration) !=
-	    c_drive_configuration) {
-		printk(KERN_INFO " drive not there\n");
-		goto out_probe;
-	}
-	e = send_receive_polled(c_gimme);
-	printk(KERN_INFO "Firmware revision %d", e & dcf_revision_code);
-	if (e & dcf_transfer_rate)
-		printk(" double");
-	else
-		printk(" single");
-	printk(" speed drive");
-	if (e & dcf_motorized_tray)
-		printk(", motorized tray");
-	if (request_irq(cm206_irq, cm206_interrupt, 0, "cm206", NULL)) {
-		printk("\nUnable to reserve IRQ---aborted\n");
-		goto out_probe;
-	}
-	printk(".\n");
-
-	if (register_blkdev(MAJOR_NR, "cm206"))
-		goto out_blkdev;
-
-	disk = alloc_disk(1);
-	if (!disk)
-		goto out_disk;
-	disk->major = MAJOR_NR;
-	disk->first_minor = 0;
-	sprintf(disk->disk_name, "cm206cd");
-	disk->fops = &cm206_bdops;
-	disk->flags = GENHD_FL_CD;
-	cm206_gendisk = disk;
-	if (register_cdrom(&cm206_info) != 0) {
-		printk(KERN_INFO "Cannot register for cdrom %d!\n", MAJOR_NR);
-		goto out_cdrom;
-	}
-	cm206_queue = blk_init_queue(do_cm206_request, &cm206_lock);
-	if (!cm206_queue)
-		goto out_queue;
-		
-	blk_queue_hardsect_size(cm206_queue, 2048);
-	disk->queue = cm206_queue;
-	add_disk(disk);
-
-	memset(cd, 0, sizeof(*cd));	/* give'm some reasonable value */
-	cd->sector_last = -1;	/* flag no data buffered */
-	cd->adapter_last = -1;
-	init_timer(&cd->timer);
-	cd->timer.function = cm206_timeout;
-	cd->max_sectors = (inw(r_data_status) & ds_ram_size) ? 24 : 97;
-	printk(KERN_INFO "%d kB adapter memory available, "
-	       " %ld bytes kernel memory used.\n", cd->max_sectors * 2,
-	       size);
-	return 0;
-
-out_queue:
-	unregister_cdrom(&cm206_info);
-out_cdrom:
-	put_disk(disk);
-out_disk:
-	unregister_blkdev(MAJOR_NR, "cm206");
-out_blkdev:
-	free_irq(cm206_irq, NULL);
-out_probe:
-	kfree(cd);
-out_base:
-	release_region(cm206_base, 16);
-	return -EIO;
-}
-
-#ifdef MODULE
-
-
-static void __init parse_options(void)
-{
-	int i;
-	for (i = 0; i < 2; i++) {
-		if (0x300 <= cm206[i] && i <= 0x370
-		    && cm206[i] % 0x10 == 0) {
-			cm206_base = cm206[i];
-			auto_probe = 0;
-		} else if (3 <= cm206[i] && cm206[i] <= 15) {
-			cm206_irq = cm206[i];
-			auto_probe = 0;
-		}
-	}
-}
-
-static int __init __cm206_init(void)
-{
-	parse_options();
-#if !defined(AUTO_PROBE_MODULE)
-	auto_probe = 0;
-#endif
-	return cm206_init();
-}
-
-static void __exit cm206_exit(void)
-{
-	del_gendisk(cm206_gendisk);
-	put_disk(cm206_gendisk);
-	if (unregister_cdrom(&cm206_info)) {
-		printk("Can't unregister cdrom cm206\n");
-		return;
-	}
-	if (unregister_blkdev(MAJOR_NR, "cm206")) {
-		printk("Can't unregister major cm206\n");
-		return;
-	}
-	blk_cleanup_queue(cm206_queue);
-	free_irq(cm206_irq, NULL);
-	kfree(cd);
-	release_region(cm206_base, 16);
-	printk(KERN_INFO "cm206 removed\n");
-}
-
-module_init(__cm206_init);
-module_exit(cm206_exit);
-
-#else				/* !MODULE */
-
-/* This setup function accepts either `auto' or numbers in the range
- * 3--11 (for irq) or 0x300--0x370 (for base port) or both. */
-
-static int __init cm206_setup(char *s)
-{
-	int i, p[4];
-
-	(void) get_options(s, ARRAY_SIZE(p), p);
-
-	if (!strcmp(s, "auto"))
-		auto_probe = 1;
-	for (i = 1; i <= p[0]; i++) {
-		if (0x300 <= p[i] && i <= 0x370 && p[i] % 0x10 == 0) {
-			cm206_base = p[i];
-			auto_probe = 0;
-		} else if (3 <= p[i] && p[i] <= 15) {
-			cm206_irq = p[i];
-			auto_probe = 0;
-		}
-	}
-	return 1;
-}
-
-__setup("cm206=", cm206_setup);
-
-#endif				/* !MODULE */
-MODULE_ALIAS_BLOCKDEV_MAJOR(CM206_CDROM_MAJOR);
-
diff --git a/drivers/cdrom/cm206.h b/drivers/cdrom/cm206.h
deleted file mode 100644
index 0ae51c1a0dac..000000000000
--- a/drivers/cdrom/cm206.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* cm206.h Header file for cm206.c.
-   Copyright (c) 1995 David van Leeuwen 
-*/
-
-#ifndef LINUX_CM206_H
-#define LINUX_CM206_H
-
-#include <linux/ioctl.h>
-
-/* First, the cm260 stuff */
-/* The ports and irq used. Although CM206_BASE and CM206_IRQ are defined
-   below, the values are not used unless autoprobing is turned off and 
-   no LILO boot options or module command line options are given. Change
-   these values to your own as last resort if autoprobing and options
-   don't work. */
-
-#define CM206_BASE 0x340
-#define CM206_IRQ 11
-
-#define r_data_status (cm206_base)
-#define r_uart_receive (cm206_base+0x2)
-#define r_fifo_output_buffer (cm206_base+0x4)
-#define r_line_status (cm206_base+0x6)
-#define r_data_control (cm206_base+0x8)
-#define r_uart_transmit (cm206_base+0xa)
-#define r_test_clock (cm206_base+0xc)
-#define r_test_control (cm206_base+0xe)
-
-/* the data_status flags */
-#define ds_ram_size 0x4000
-#define ds_toc_ready 0x2000
-#define ds_fifo_empty 0x1000
-#define ds_sync_error 0x800
-#define ds_crc_error 0x400
-#define ds_data_error 0x200
-#define ds_fifo_overflow 0x100
-#define ds_data_ready 0x80
-
-/* the line_status flags */
-#define ls_attention 0x10
-#define ls_parity_error 0x8
-#define ls_overrun 0x4
-#define ls_receive_buffer_full 0x2
-#define ls_transmitter_buffer_empty 0x1
-
-/* the data control register flags */
-#define dc_read_q_channel 0x4000
-#define dc_mask_sync_error 0x2000
-#define dc_toc_enable 0x1000
-#define dc_no_stop_on_error 0x800
-#define dc_break 0x400
-#define dc_initialize 0x200
-#define dc_mask_transmit_ready 0x100
-#define dc_flag_enable 0x80
-
-/* Define the default data control register flags here */
-#define dc_normal (dc_mask_sync_error | dc_no_stop_on_error | \
-		   dc_mask_transmit_ready)
-
-/* now some constants related to the cm206 */
-/* another drive status byte, echoed by the cm206 on most commands */
-
-#define dsb_error_condition 0x1
-#define dsb_play_in_progress 0x4
-#define dsb_possible_media_change 0x8
-#define dsb_disc_present 0x10
-#define dsb_drive_not_ready 0x20
-#define dsb_tray_locked 0x40
-#define dsb_tray_not_closed 0x80
-
-#define dsb_not_useful (dsb_drive_not_ready | dsb_tray_not_closed)
-
-/* the cm206 command set */
-
-#define c_close_tray 0
-#define c_lock_tray 0x01
-#define c_unlock_tray 0x04
-#define c_open_tray 0x05
-#define c_seek 0x10
-#define c_read_data 0x20
-#define c_force_1x 0x21
-#define c_force_2x 0x22
-#define c_auto_mode 0x23
-#define c_play 0x30
-#define c_set_audio_mode 0x31
-#define c_read_current_q 0x41
-#define c_stream_q 0x42
-#define c_drive_status 0x50
-#define c_disc_status 0x51
-#define c_audio_status 0x52
-#define c_drive_configuration 0x53
-#define c_read_upc 0x60
-#define c_stop 0x70
-#define c_calc_checksum 0xe5
-
-#define c_gimme 0xf8
-
-/* finally, the (error) condition that the drive can be in      *
- * OK, this is not always an error, but let's prefix it with e_ */
-
-#define e_none 0
-#define e_illegal_command 0x01
-#define e_sync 0x02
-#define e_seek 0x03
-#define e_parity 0x04
-#define e_focus 0x05
-#define e_header_sync 0x06
-#define e_code_incompatibility 0x07
-#define e_reset_done 0x08
-#define e_bad_parameter 0x09
-#define e_radial 0x0a
-#define e_sub_code 0x0b
-#define e_no_data_track 0x0c
-#define e_scan 0x0d
-#define e_tray_open 0x0f
-#define e_no_disc 0x10
-#define e_tray stalled 0x11
-
-/* drive configuration masks */
-
-#define dcf_revision_code 0x7
-#define dcf_transfer_rate 0x60
-#define dcf_motorized_tray 0x80
-
-/* disc status byte */
-
-#define cds_multi_session 0x2
-#define cds_all_audio 0x8
-#define cds_xa_mode 0xf0
-
-/* finally some ioctls for the driver */
-
-#define CM206CTL_GET_STAT _IO( 0x20, 0 )
-#define CM206CTL_GET_LAST_STAT _IO( 0x20, 1 )
-
-#ifdef STATISTICS
-
-/* This is an ugly way to guarantee that the names of the statistics
- * are the same in the code and in the diagnostics program.  */
-
-#ifdef __KERNEL__
-#define x(a) st_ ## a
-#define y enum
-#else
-#define x(a) #a
-#define y char * stats_name[] = 
-#endif
-
-y {x(interrupt), x(data_ready), x(fifo_overflow), x(data_error),
-     x(crc_error), x(sync_error), x(lost_intr), x(echo),
-     x(write_timeout), x(receive_timeout), x(read_timeout),
-     x(dsb_timeout), x(stop_0xff), x(back_read_timeout),
-     x(sector_transferred), x(read_restarted), x(read_background),
-     x(bh), x(open), x(ioctl_multisession), x(attention)
-#ifdef __KERNEL__
-     , x(last_entry)
-#endif
- };
-
-#ifdef __KERNEL__
-#define NR_STATS st_last_entry
-#else
-#define NR_STATS (sizeof(stats_name)/sizeof(char*))
-#endif
-
-#undef y
-#undef x
-
-#endif /* STATISTICS */
-
-#endif /* LINUX_CM206_H */
diff --git a/drivers/cdrom/gscd.c b/drivers/cdrom/gscd.c
deleted file mode 100644
index 176742ed007b..000000000000
--- a/drivers/cdrom/gscd.c
+++ /dev/null
@@ -1,1029 +0,0 @@
-#define GSCD_VERSION "0.4a Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>"
-
-/*
-	linux/drivers/block/gscd.c - GoldStar R420 CDROM driver
-
-        Copyright (C) 1995  Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>
-        based upon pre-works by   Eberhard Moenkeberg <emoenke@gwdg.de>
-        
-
-        For all kind of other information about the GoldStar CDROM
-        and this Linux device driver I installed a WWW-URL:
-        http://linux.rz.fh-hannover.de/~raupach        
-
-
-             If you are the editor of a Linux CD, you should
-             enable gscd.c within your boot floppy kernel and
-             send me one of your CDs for free.
-
-
-        --------------------------------------------------------------------
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2, or (at your option)
-	any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-	
-	--------------------------------------------------------------------
-	
-	9 November 1999 -- Make kernel-parameter implementation work with 2.3.x 
-	                   Removed init_module & cleanup_module in favor of 
-		   	   module_init & module_exit.
-			   Torben Mathiasen <tmm@image.dk>
-
-*/
-
-/* These settings are for various debug-level. Leave they untouched ... */
-#define  NO_GSCD_DEBUG
-#define  NO_IOCTL_DEBUG
-#define  NO_MODULE_DEBUG
-#define  NO_FUTURE_WORK
-/*------------------------*/
-
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#define MAJOR_NR GOLDSTAR_CDROM_MAJOR
-#include <linux/blkdev.h>
-#include "gscd.h"
-
-static int gscdPresent = 0;
-
-static unsigned char gscd_buf[2048];	/* buffer for block size conversion */
-static int gscd_bn = -1;
-static short gscd_port = GSCD_BASE_ADDR;
-module_param_named(gscd, gscd_port, short, 0);
-
-/* Kommt spaeter vielleicht noch mal dran ...
- *    static DECLARE_WAIT_QUEUE_HEAD(gscd_waitq);
- */
-
-static void gscd_read_cmd(struct request *req);
-static void gscd_hsg2msf(long hsg, struct msf *msf);
-static void gscd_bin2bcd(unsigned char *p);
-
-/* Schnittstellen zum Kern/FS */
-
-static void __do_gscd_request(unsigned long dummy);
-static int gscd_ioctl(struct inode *, struct file *, unsigned int,
-		      unsigned long);
-static int gscd_open(struct inode *, struct file *);
-static int gscd_release(struct inode *, struct file *);
-static int check_gscd_med_chg(struct gendisk *disk);
-
-/*      GoldStar Funktionen    */
-
-static void cmd_out(int, char *, char *, int);
-static void cmd_status(void);
-static void init_cd_drive(int);
-
-static int get_status(void);
-static void clear_Audio(void);
-static void cc_invalidate(void);
-
-/* some things for the next version */
-#ifdef FUTURE_WORK
-static void update_state(void);
-static long gscd_msf2hsg(struct msf *mp);
-static int gscd_bcd2bin(unsigned char bcd);
-#endif
-
-
-/*      lo-level cmd-Funktionen    */
-
-static void cmd_info_in(char *, int);
-static void cmd_end(void);
-static void cmd_read_b(char *, int, int);
-static void cmd_read_w(char *, int, int);
-static int cmd_unit_alive(void);
-static void cmd_write_cmd(char *);
-
-
-/*      GoldStar Variablen     */
-
-static int curr_drv_state;
-static int drv_states[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
-static int drv_mode;
-static int disk_state;
-static int speed;
-static int ndrives;
-
-static unsigned char drv_num_read;
-static unsigned char f_dsk_valid;
-static unsigned char current_drive;
-static unsigned char f_drv_ok;
-
-
-static char f_AudioPlay;
-static char f_AudioPause;
-static int AudioStart_m;
-static int AudioStart_f;
-static int AudioEnd_m;
-static int AudioEnd_f;
-
-static DEFINE_TIMER(gscd_timer, NULL, 0, 0);
-static DEFINE_SPINLOCK(gscd_lock);
-static struct request_queue *gscd_queue;
-
-static struct block_device_operations gscd_fops = {
-	.owner		= THIS_MODULE,
-	.open		= gscd_open,
-	.release	= gscd_release,
-	.ioctl		= gscd_ioctl,
-	.media_changed	= check_gscd_med_chg,
-};
-
-/* 
- * Checking if the media has been changed
- * (not yet implemented)
- */
-static int check_gscd_med_chg(struct gendisk *disk)
-{
-#ifdef GSCD_DEBUG
-	printk("gscd: check_med_change\n");
-#endif
-	return 0;
-}
-
-
-#ifndef MODULE
-/* Using new interface for kernel-parameters */
-
-static int __init gscd_setup(char *str)
-{
-	int ints[2];
-	(void) get_options(str, ARRAY_SIZE(ints), ints);
-
-	if (ints[0] > 0) {
-		gscd_port = ints[1];
-	}
-	return 1;
-}
-
-__setup("gscd=", gscd_setup);
-
-#endif
-
-static int gscd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
-		      unsigned long arg)
-{
-	unsigned char to_do[10];
-	unsigned char dummy;
-
-
-	switch (cmd) {
-	case CDROMSTART:	/* Spin up the drive */
-		/* Don't think we can do this.  Even if we could,
-		 * I think the drive times out and stops after a while
-		 * anyway.  For now, ignore it.
-		 */
-		return 0;
-
-	case CDROMRESUME:	/* keine Ahnung was das ist */
-		return 0;
-
-
-	case CDROMEJECT:
-		cmd_status();
-		to_do[0] = CMD_TRAY_CTL;
-		cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-
-		return 0;
-
-	default:
-		return -EINVAL;
-	}
-
-}
-
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-
-static void gscd_transfer(struct request *req)
-{
-	while (req->nr_sectors > 0 && gscd_bn == req->sector / 4) {
-		long offs = (req->sector & 3) * 512;
-		memcpy(req->buffer, gscd_buf + offs, 512);
-		req->nr_sectors--;
-		req->sector++;
-		req->buffer += 512;
-	}
-}
-
-
-/*
- * I/O request routine called from Linux kernel.
- */
-
-static void do_gscd_request(request_queue_t * q)
-{
-	__do_gscd_request(0);
-}
-
-static void __do_gscd_request(unsigned long dummy)
-{
-	struct request *req;
-	unsigned int block;
-	unsigned int nsect;
-
-repeat:
-	req = elv_next_request(gscd_queue);
-	if (!req)
-		return;
-
-	block = req->sector;
-	nsect = req->nr_sectors;
-
-	if (req->sector == -1)
-		goto out;
-
-	if (rq_data_dir(req) != READ) {
-		printk("GSCD: bad cmd %u\n", rq_data_dir(req));
-		end_request(req, 0);
-		goto repeat;
-	}
-
-	gscd_transfer(req);
-
-	/* if we satisfied the request from the buffer, we're done. */
-
-	if (req->nr_sectors == 0) {
-		end_request(req, 1);
-		goto repeat;
-	}
-#ifdef GSCD_DEBUG
-	printk("GSCD: block %d, nsect %d\n", block, nsect);
-#endif
-	gscd_read_cmd(req);
-out:
-	return;
-}
-
-
-
-/*
- * Check the result of the set-mode command.  On success, send the
- * read-data command.
- */
-
-static void gscd_read_cmd(struct request *req)
-{
-	long block;
-	struct gscd_Play_msf gscdcmd;
-	char cmd[] = { CMD_READ, 0x80, 0, 0, 0, 0, 1 };	/* cmd mode M-S-F secth sectl */
-
-	cmd_status();
-	if (disk_state & (ST_NO_DISK | ST_DOOR_OPEN)) {
-		printk("GSCD: no disk or door open\n");
-		end_request(req, 0);
-	} else {
-		if (disk_state & ST_INVALID) {
-			printk("GSCD: disk invalid\n");
-			end_request(req, 0);
-		} else {
-			gscd_bn = -1;	/* purge our buffer */
-			block = req->sector / 4;
-			gscd_hsg2msf(block, &gscdcmd.start);	/* cvt to msf format */
-
-			cmd[2] = gscdcmd.start.min;
-			cmd[3] = gscdcmd.start.sec;
-			cmd[4] = gscdcmd.start.frame;
-
-#ifdef GSCD_DEBUG
-			printk("GSCD: read msf %d:%d:%d\n", cmd[2], cmd[3],
-			       cmd[4]);
-#endif
-			cmd_out(TYPE_DATA, (char *) &cmd,
-				(char *) &gscd_buf[0], 1);
-
-			gscd_bn = req->sector / 4;
-			gscd_transfer(req);
-			end_request(req, 1);
-		}
-	}
-	SET_TIMER(__do_gscd_request, 1);
-}
-
-
-/*
- * Open the device special file.  Check that a disk is in.
- */
-
-static int gscd_open(struct inode *ip, struct file *fp)
-{
-	int st;
-
-#ifdef GSCD_DEBUG
-	printk("GSCD: open\n");
-#endif
-
-	if (gscdPresent == 0)
-		return -ENXIO;	/* no hardware */
-
-	get_status();
-	st = disk_state & (ST_NO_DISK | ST_DOOR_OPEN);
-	if (st) {
-		printk("GSCD: no disk or door open\n");
-		return -ENXIO;
-	}
-
-/*	if (updateToc() < 0)
-		return -EIO;
-*/
-
-	return 0;
-}
-
-
-/*
- * On close, we flush all gscd blocks from the buffer cache.
- */
-
-static int gscd_release(struct inode *inode, struct file *file)
-{
-
-#ifdef GSCD_DEBUG
-	printk("GSCD: release\n");
-#endif
-
-	gscd_bn = -1;
-
-	return 0;
-}
-
-
-static int get_status(void)
-{
-	int status;
-
-	cmd_status();
-	status = disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01);
-
-	if (status == (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) {
-		cc_invalidate();
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-
-static void cc_invalidate(void)
-{
-	drv_num_read = 0xFF;
-	f_dsk_valid = 0xFF;
-	current_drive = 0xFF;
-	f_drv_ok = 0xFF;
-
-	clear_Audio();
-
-}
-
-static void clear_Audio(void)
-{
-
-	f_AudioPlay = 0;
-	f_AudioPause = 0;
-	AudioStart_m = 0;
-	AudioStart_f = 0;
-	AudioEnd_m = 0;
-	AudioEnd_f = 0;
-
-}
-
-/*
- *   waiting ?  
- */
-
-static int wait_drv_ready(void)
-{
-	int found, read;
-
-	do {
-		found = inb(GSCDPORT(0));
-		found &= 0x0f;
-		read = inb(GSCDPORT(0));
-		read &= 0x0f;
-	} while (read != found);
-
-#ifdef GSCD_DEBUG
-	printk("Wait for: %d\n", read);
-#endif
-
-	return read;
-}
-
-static void cc_Ident(char *respons)
-{
-	char to_do[] = { CMD_IDENT, 0, 0 };
-
-	cmd_out(TYPE_INFO, (char *) &to_do, (char *) respons, (int) 0x1E);
-
-}
-
-static void cc_SetSpeed(void)
-{
-	char to_do[] = { CMD_SETSPEED, 0, 0 };
-	char dummy;
-
-	if (speed > 0) {
-		to_do[1] = speed & 0x0F;
-		cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-	}
-}
-
-static void cc_Reset(void)
-{
-	char to_do[] = { CMD_RESET, 0 };
-	char dummy;
-
-	cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-}
-
-static void cmd_status(void)
-{
-	char to_do[] = { CMD_STATUS, 0 };
-	char dummy;
-
-	cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-
-#ifdef GSCD_DEBUG
-	printk("GSCD: Status: %d\n", disk_state);
-#endif
-
-}
-
-static void cmd_out(int cmd_type, char *cmd, char *respo_buf, int respo_count)
-{
-	int result;
-
-
-	result = wait_drv_ready();
-	if (result != drv_mode) {
-		unsigned long test_loops = 0xFFFF;
-		int i, dummy;
-
-		outb(curr_drv_state, GSCDPORT(0));
-
-		/* LOCLOOP_170 */
-		do {
-			result = wait_drv_ready();
-			test_loops--;
-		} while ((result != drv_mode) && (test_loops > 0));
-
-		if (result != drv_mode) {
-			disk_state = ST_x08 | ST_x04 | ST_INVALID;
-			return;
-		}
-
-		/* ...and waiting */
-		for (i = 1, dummy = 1; i < 0xFFFF; i++) {
-			dummy *= i;
-		}
-	}
-
-	/* LOC_172 */
-	/* check the unit */
-	/* and wake it up */
-	if (cmd_unit_alive() != 0x08) {
-		/* LOC_174 */
-		/* game over for this unit */
-		disk_state = ST_x08 | ST_x04 | ST_INVALID;
-		return;
-	}
-
-	/* LOC_176 */
-#ifdef GSCD_DEBUG
-	printk("LOC_176 ");
-#endif
-	if (drv_mode == 0x09) {
-		/* magic... */
-		printk("GSCD: magic ...\n");
-		outb(result, GSCDPORT(2));
-	}
-
-	/* write the command to the drive */
-	cmd_write_cmd(cmd);
-
-	/* LOC_178 */
-	for (;;) {
-		result = wait_drv_ready();
-		if (result != drv_mode) {
-			/* LOC_179 */
-			if (result == 0x04) {	/* Mode 4 */
-				/* LOC_205 */
-#ifdef GSCD_DEBUG
-				printk("LOC_205 ");
-#endif
-				disk_state = inb(GSCDPORT(2));
-
-				do {
-					result = wait_drv_ready();
-				} while (result != drv_mode);
-				return;
-
-			} else {
-				if (result == 0x06) {	/* Mode 6 */
-					/* LOC_181 */
-#ifdef GSCD_DEBUG
-					printk("LOC_181 ");
-#endif
-
-					if (cmd_type == TYPE_DATA) {
-						/* read data */
-						/* LOC_184 */
-						if (drv_mode == 9) {
-							/* read the data to the buffer (word) */
-
-							/* (*(cmd+1))?(CD_FRAMESIZE/2):(CD_FRAMESIZE_RAW/2) */
-							cmd_read_w
-							    (respo_buf,
-							     respo_count,
-							     CD_FRAMESIZE /
-							     2);
-							return;
-						} else {
-							/* read the data to the buffer (byte) */
-
-							/* (*(cmd+1))?(CD_FRAMESIZE):(CD_FRAMESIZE_RAW)    */
-							cmd_read_b
-							    (respo_buf,
-							     respo_count,
-							     CD_FRAMESIZE);
-							return;
-						}
-					} else {
-						/* read the info to the buffer */
-						cmd_info_in(respo_buf,
-							    respo_count);
-						return;
-					}
-
-					return;
-				}
-			}
-
-		} else {
-			disk_state = ST_x08 | ST_x04 | ST_INVALID;
-			return;
-		}
-	}			/* for (;;) */
-
-
-#ifdef GSCD_DEBUG
-	printk("\n");
-#endif
-}
-
-
-static void cmd_write_cmd(char *pstr)
-{
-	int i, j;
-
-	/* LOC_177 */
-#ifdef GSCD_DEBUG
-	printk("LOC_177 ");
-#endif
-
-	/* calculate the number of parameter */
-	j = *pstr & 0x0F;
-
-	/* shift it out */
-	for (i = 0; i < j; i++) {
-		outb(*pstr, GSCDPORT(2));
-		pstr++;
-	}
-}
-
-
-static int cmd_unit_alive(void)
-{
-	int result;
-	unsigned long max_test_loops;
-
-
-	/* LOC_172 */
-#ifdef GSCD_DEBUG
-	printk("LOC_172 ");
-#endif
-
-	outb(curr_drv_state, GSCDPORT(0));
-	max_test_loops = 0xFFFF;
-
-	do {
-		result = wait_drv_ready();
-		max_test_loops--;
-	} while ((result != 0x08) && (max_test_loops > 0));
-
-	return result;
-}
-
-
-static void cmd_info_in(char *pb, int count)
-{
-	int result;
-	char read;
-
-
-	/* read info */
-	/* LOC_182 */
-#ifdef GSCD_DEBUG
-	printk("LOC_182 ");
-#endif
-
-	do {
-		read = inb(GSCDPORT(2));
-		if (count > 0) {
-			*pb = read;
-			pb++;
-			count--;
-		}
-
-		/* LOC_183 */
-		do {
-			result = wait_drv_ready();
-		} while (result == 0x0E);
-	} while (result == 6);
-
-	cmd_end();
-	return;
-}
-
-
-static void cmd_read_b(char *pb, int count, int size)
-{
-	int result;
-	int i;
-
-
-	/* LOC_188 */
-	/* LOC_189 */
-#ifdef GSCD_DEBUG
-	printk("LOC_189 ");
-#endif
-
-	do {
-		do {
-			result = wait_drv_ready();
-		} while (result != 6 || result == 0x0E);
-
-		if (result != 6) {
-			cmd_end();
-			return;
-		}
-#ifdef GSCD_DEBUG
-		printk("LOC_191 ");
-#endif
-
-		for (i = 0; i < size; i++) {
-			*pb = inb(GSCDPORT(2));
-			pb++;
-		}
-		count--;
-	} while (count > 0);
-
-	cmd_end();
-	return;
-}
-
-
-static void cmd_end(void)
-{
-	int result;
-
-
-	/* LOC_204 */
-#ifdef GSCD_DEBUG
-	printk("LOC_204 ");
-#endif
-
-	do {
-		result = wait_drv_ready();
-		if (result == drv_mode) {
-			return;
-		}
-	} while (result != 4);
-
-	/* LOC_205 */
-#ifdef GSCD_DEBUG
-	printk("LOC_205 ");
-#endif
-
-	disk_state = inb(GSCDPORT(2));
-
-	do {
-		result = wait_drv_ready();
-	} while (result != drv_mode);
-	return;
-
-}
-
-
-static void cmd_read_w(char *pb, int count, int size)
-{
-	int result;
-	int i;
-
-
-#ifdef GSCD_DEBUG
-	printk("LOC_185 ");
-#endif
-
-	do {
-		/* LOC_185 */
-		do {
-			result = wait_drv_ready();
-		} while (result != 6 || result == 0x0E);
-
-		if (result != 6) {
-			cmd_end();
-			return;
-		}
-
-		for (i = 0; i < size; i++) {
-			/* na, hier muss ich noch mal drueber nachdenken */
-			*pb = inw(GSCDPORT(2));
-			pb++;
-		}
-		count--;
-	} while (count > 0);
-
-	cmd_end();
-	return;
-}
-
-static int __init find_drives(void)
-{
-	int *pdrv;
-	int drvnum;
-	int subdrv;
-	int i;
-
-	speed = 0;
-	pdrv = (int *) &drv_states;
-	curr_drv_state = 0xFE;
-	subdrv = 0;
-	drvnum = 0;
-
-	for (i = 0; i < 8; i++) {
-		subdrv++;
-		cmd_status();
-		disk_state &= ST_x08 | ST_x04 | ST_INVALID | ST_x01;
-		if (disk_state != (ST_x08 | ST_x04 | ST_INVALID)) {
-			/* LOC_240 */
-			*pdrv = curr_drv_state;
-			init_cd_drive(drvnum);
-			pdrv++;
-			drvnum++;
-		} else {
-			if (subdrv < 2) {
-				continue;
-			} else {
-				subdrv = 0;
-			}
-		}
-
-/*       curr_drv_state<<1;         <-- das geht irgendwie nicht */
-/* muss heissen:    curr_drv_state <<= 1; (ist ja Wert-Zuweisung) */
-		curr_drv_state *= 2;
-		curr_drv_state |= 1;
-#ifdef GSCD_DEBUG
-		printk("DriveState: %d\n", curr_drv_state);
-#endif
-	}
-
-	ndrives = drvnum;
-	return drvnum;
-}
-
-static void __init init_cd_drive(int num)
-{
-	char resp[50];
-	int i;
-
-	printk("GSCD: init unit %d\n", num);
-	cc_Ident((char *) &resp);
-
-	printk("GSCD: identification: ");
-	for (i = 0; i < 0x1E; i++) {
-		printk("%c", resp[i]);
-	}
-	printk("\n");
-
-	cc_SetSpeed();
-
-}
-
-#ifdef FUTURE_WORK
-/* return_done */
-static void update_state(void)
-{
-	unsigned int AX;
-
-
-	if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) == 0) {
-		if (disk_state == (ST_x08 | ST_x04 | ST_INVALID)) {
-			AX = ST_INVALID;
-		}
-
-		if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01))
-		    == 0) {
-			invalidate();
-			f_drv_ok = 0;
-		}
-
-		AX |= 0x8000;
-	}
-
-	if (disk_state & ST_PLAYING) {
-		AX |= 0x200;
-	}
-
-	AX |= 0x100;
-	/* pkt_esbx = AX; */
-
-	disk_state = 0;
-
-}
-#endif
-
-static struct gendisk *gscd_disk;
-
-static void __exit gscd_exit(void)
-{
-	CLEAR_TIMER;
-
-	del_gendisk(gscd_disk);
-	put_disk(gscd_disk);
-	if ((unregister_blkdev(MAJOR_NR, "gscd") == -EINVAL)) {
-		printk("What's that: can't unregister GoldStar-module\n");
-		return;
-	}
-	blk_cleanup_queue(gscd_queue);
-	release_region(gscd_port, GSCD_IO_EXTENT);
-	printk(KERN_INFO "GoldStar-module released.\n");
-}
-
-/* This is the common initialisation for the GoldStar drive. */
-/* It is called at boot time AND for module init.           */
-static int __init gscd_init(void)
-{
-	int i;
-	int result;
-	int ret=0;
-
-	printk(KERN_INFO "GSCD: version %s\n", GSCD_VERSION);
-	printk(KERN_INFO
-	       "GSCD: Trying to detect a Goldstar R420 CD-ROM drive at 0x%X.\n",
-	       gscd_port);
-
-	if (!request_region(gscd_port, GSCD_IO_EXTENT, "gscd")) {
-		printk(KERN_WARNING "GSCD: Init failed, I/O port (%X) already"
-		       " in use.\n", gscd_port);
-		return -EIO;
-	}
-
-
-	/* check for card */
-	result = wait_drv_ready();
-	if (result == 0x09) {
-		printk(KERN_WARNING "GSCD: DMA kann ich noch nicht!\n");
-		ret = -EIO;
-		goto err_out1;
-	}
-
-	if (result == 0x0b) {
-		drv_mode = result;
-		i = find_drives();
-		if (i == 0) {
-			printk(KERN_WARNING "GSCD: GoldStar CD-ROM Drive is"
-			       " not found.\n");
-			ret = -EIO;
-			goto err_out1;
-		}
-	}
-
-	if ((result != 0x0b) && (result != 0x09)) {
-		printk(KERN_WARNING "GSCD: GoldStar Interface Adapter does not "
-		       "exist or H/W error\n");
-		ret = -EIO;
-		goto err_out1;
-	}
-
-	/* reset all drives */
-	i = 0;
-	while (drv_states[i] != 0) {
-		curr_drv_state = drv_states[i];
-		printk(KERN_INFO "GSCD: Reset unit %d ... ", i);
-		cc_Reset();
-		printk("done\n");
-		i++;
-	}
-
-	gscd_disk = alloc_disk(1);
-	if (!gscd_disk)
-		goto err_out1;
-	gscd_disk->major = MAJOR_NR;
-	gscd_disk->first_minor = 0;
-	gscd_disk->fops = &gscd_fops;
-	sprintf(gscd_disk->disk_name, "gscd");
-
-	if (register_blkdev(MAJOR_NR, "gscd")) {
-		ret = -EIO;
-		goto err_out2;
-	}
-
-	gscd_queue = blk_init_queue(do_gscd_request, &gscd_lock);
-	if (!gscd_queue) {
-		ret = -ENOMEM;
-		goto err_out3;
-	}
-
-	disk_state = 0;
-	gscdPresent = 1;
-
-	gscd_disk->queue = gscd_queue;
-	add_disk(gscd_disk);
-
-	printk(KERN_INFO "GSCD: GoldStar CD-ROM Drive found.\n");
-	return 0;
-
-err_out3:
-	unregister_blkdev(MAJOR_NR, "gscd");
-err_out2:
-	put_disk(gscd_disk);
-err_out1:
-	release_region(gscd_port, GSCD_IO_EXTENT);
-	return ret;
-}
-
-static void gscd_hsg2msf(long hsg, struct msf *msf)
-{
-	hsg += CD_MSF_OFFSET;
-	msf->min = hsg / (CD_FRAMES * CD_SECS);
-	hsg %= CD_FRAMES * CD_SECS;
-	msf->sec = hsg / CD_FRAMES;
-	msf->frame = hsg % CD_FRAMES;
-
-	gscd_bin2bcd(&msf->min);	/* convert to BCD */
-	gscd_bin2bcd(&msf->sec);
-	gscd_bin2bcd(&msf->frame);
-}
-
-
-static void gscd_bin2bcd(unsigned char *p)
-{
-	int u, t;
-
-	u = *p % 10;
-	t = *p / 10;
-	*p = u | (t << 4);
-}
-
-
-#ifdef FUTURE_WORK
-static long gscd_msf2hsg(struct msf *mp)
-{
-	return gscd_bcd2bin(mp->frame)
-	    + gscd_bcd2bin(mp->sec) * CD_FRAMES
-	    + gscd_bcd2bin(mp->min) * CD_FRAMES * CD_SECS - CD_MSF_OFFSET;
-}
-
-static int gscd_bcd2bin(unsigned char bcd)
-{
-	return (bcd >> 4) * 10 + (bcd & 0xF);
-}
-#endif
-
-MODULE_AUTHOR("Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>");
-MODULE_LICENSE("GPL");
-module_init(gscd_init);
-module_exit(gscd_exit);
-MODULE_ALIAS_BLOCKDEV_MAJOR(GOLDSTAR_CDROM_MAJOR);
diff --git a/drivers/cdrom/gscd.h b/drivers/cdrom/gscd.h
deleted file mode 100644
index a41e64bfc061..000000000000
--- a/drivers/cdrom/gscd.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Definitions for a GoldStar R420 CD-ROM interface
- *
- *   Copyright (C) 1995  Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>
- *                       Eberhard Moenkeberg <emoenke@gwdg.de>
- *
- *  Published under the GPL.
- *
- */
-
-
-/* The Interface Card default address is 0x340. This will work for most
-   applications. Address selection is accomplished by jumpers PN801-1 to
-   PN801-4 on the GoldStar Interface Card.
-   Appropriate settings are: 0x300, 0x310, 0x320, 0x330, 0x340, 0x350, 0x360
-   0x370, 0x380, 0x390, 0x3A0, 0x3B0, 0x3C0, 0x3D0, 0x3E0, 0x3F0             */
-
-/* insert here the I/O port address and extent */
-#define GSCD_BASE_ADDR	        0x340
-#define GSCD_IO_EXTENT          4
-
-
-/************** nothing to set up below here *********************/
-
-/* port access macro */
-#define GSCDPORT(x)		(gscd_port + (x))
-
-/*
- * commands
- * the lower nibble holds the command length
- */
-#define CMD_STATUS     0x01
-#define CMD_READSUBQ   0x02 /* 1: ?, 2: UPC, 5: ? */
-#define CMD_SEEK       0x05 /* read_mode M-S-F */
-#define CMD_READ       0x07 /* read_mode M-S-F nsec_h nsec_l */
-#define CMD_RESET      0x11
-#define CMD_SETMODE    0x15
-#define CMD_PLAY       0x17 /* M-S-F M-S-F */
-#define CMD_LOCK_CTL   0x22 /* 0: unlock, 1: lock */
-#define CMD_IDENT      0x31
-#define CMD_SETSPEED   0x32 /* 0: auto */ /* ??? */
-#define CMD_GETMODE    0x41
-#define CMD_PAUSE      0x51
-#define CMD_READTOC    0x61
-#define CMD_DISKINFO   0x71
-#define CMD_TRAY_CTL   0x81
-
-/*
- * disk_state:
- */
-#define ST_PLAYING	0x80
-#define ST_UNLOCKED	0x40
-#define ST_NO_DISK	0x20
-#define ST_DOOR_OPEN	0x10
-#define ST_x08  0x08
-#define ST_x04	0x04
-#define ST_INVALID	0x02
-#define ST_x01	0x01
-
-/*
- * cmd_type:
- */
-#define TYPE_INFO	0x01
-#define TYPE_DATA	0x02
-
-/*
- * read_mode:
- */
-#define MOD_POLLED	0x80
-#define MOD_x08	0x08
-#define MOD_RAW	0x04
-
-#define READ_DATA(port, buf, nr) insb(port, buf, nr)
-
-#define SET_TIMER(func, jifs) \
-	((mod_timer(&gscd_timer, jiffies + jifs)), \
-	(gscd_timer.function = func))
-
-#define CLEAR_TIMER		del_timer_sync(&gscd_timer)
-
-#define MAX_TRACKS		104
-
-struct msf {
-	unsigned char	min;
-	unsigned char	sec;
-	unsigned char	frame;
-};
-
-struct gscd_Play_msf {
-	struct msf	start;
-	struct msf	end;
-};
-
-struct gscd_DiskInfo {
-	unsigned char	first;
-	unsigned char	last;
-	struct msf	diskLength;
-	struct msf	firstTrack;
-};
-
-struct gscd_Toc {
-	unsigned char	ctrl_addr;
-	unsigned char	track;
-	unsigned char	pointIndex;
-	struct msf	trackTime;
-	struct msf	diskTime;
-};
-
diff --git a/drivers/cdrom/isp16.c b/drivers/cdrom/isp16.c
deleted file mode 100644
index db0fd9a240e3..000000000000
--- a/drivers/cdrom/isp16.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/* -- ISP16 cdrom detection and configuration
- *
- *    Copyright (c) 1995,1996 Eric van der Maarel <H.T.M.v.d.Maarel@marin.nl>
- *
- *    Version 0.6
- *
- *    History:
- *    0.5 First release.
- *        Was included in the sjcd and optcd cdrom drivers.
- *    0.6 First "stand-alone" version.
- *        Removed sound configuration.
- *        Added "module" support.
- *
- *      9 November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	                   Removed init_module & cleanup_module in favor of 
- *			   module_init & module_exit.
- *			   Torben Mathiasen <tmm@image.dk>
- *
- *     19 June 2004     -- check_region() converted to request_region()
- *                         and return statement cleanups.
- *                          - Jesper Juhl
- *
- *    Detect cdrom interface on ISP16 sound card.
- *    Configure cdrom interface.
- *
- *    Algorithm for the card with OPTi 82C928 taken
- *    from the CDSETUP.SYS driver for MSDOS,
- *    by OPTi Computers, version 2.03.
- *    Algorithm for the card with OPTi 82C929 as communicated
- *    to me by Vadim Model and Leo Spiekman.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#define ISP16_VERSION_MAJOR 0
-#define ISP16_VERSION_MINOR 6
-
-#include <linux/module.h>
-
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include "isp16.h"
-
-static short isp16_detect(void);
-static short isp16_c928__detect(void);
-static short isp16_c929__detect(void);
-static short isp16_cdi_config(int base, u_char drive_type, int irq,
-			      int dma);
-static short isp16_type;	/* dependent on type of interface card */
-static u_char isp16_ctrl;
-static u_short isp16_enable_port;
-
-static int isp16_cdrom_base = ISP16_CDROM_IO_BASE;
-static int isp16_cdrom_irq = ISP16_CDROM_IRQ;
-static int isp16_cdrom_dma = ISP16_CDROM_DMA;
-static char *isp16_cdrom_type = ISP16_CDROM_TYPE;
-
-module_param(isp16_cdrom_base, int, 0);
-module_param(isp16_cdrom_irq, int, 0);
-module_param(isp16_cdrom_dma, int, 0);
-module_param(isp16_cdrom_type, charp, 0);
-
-#define ISP16_IN(p) (outb(isp16_ctrl,ISP16_CTRL_PORT), inb(p))
-#define ISP16_OUT(p,b) (outb(isp16_ctrl,ISP16_CTRL_PORT), outb(b,p))
-
-#ifndef MODULE
-
-static int
-__init isp16_setup(char *str)
-{
-	int ints[4];
-
-	(void) get_options(str, ARRAY_SIZE(ints), ints);
-	if (ints[0] > 0)
-		isp16_cdrom_base = ints[1];
-	if (ints[0] > 1)
-		isp16_cdrom_irq = ints[2];
-	if (ints[0] > 2)
-		isp16_cdrom_dma = ints[3];
-	if (str)
-		isp16_cdrom_type = str;
-
-	return 1;
-}
-
-__setup("isp16=", isp16_setup);
-
-#endif				/* MODULE */
-
-/*
- *  ISP16 initialisation.
- *
- */
-static int __init isp16_init(void)
-{
-	u_char expected_drive;
-
-	printk(KERN_INFO
-	       "ISP16: configuration cdrom interface, version %d.%d.\n",
-	       ISP16_VERSION_MAJOR, ISP16_VERSION_MINOR);
-
-	if (!strcmp(isp16_cdrom_type, "noisp16")) {
-		printk("ISP16: no cdrom interface configured.\n");
-		return 0;
-	}
-
-	if (!request_region(ISP16_IO_BASE, ISP16_IO_SIZE, "isp16")) {
-		printk("ISP16: i/o ports already in use.\n");
-		goto out;
-	}
-
-	if ((isp16_type = isp16_detect()) < 0) {
-		printk("ISP16: no cdrom interface found.\n");
-		goto cleanup_out;
-	}
-
-	printk(KERN_INFO
-	       "ISP16: cdrom interface (with OPTi 82C92%d chip) detected.\n",
-	       (isp16_type == 2) ? 9 : 8);
-
-	if (!strcmp(isp16_cdrom_type, "Sanyo"))
-		expected_drive =
-		    (isp16_type ? ISP16_SANYO1 : ISP16_SANYO0);
-	else if (!strcmp(isp16_cdrom_type, "Sony"))
-		expected_drive = ISP16_SONY;
-	else if (!strcmp(isp16_cdrom_type, "Panasonic"))
-		expected_drive =
-		    (isp16_type ? ISP16_PANASONIC1 : ISP16_PANASONIC0);
-	else if (!strcmp(isp16_cdrom_type, "Mitsumi"))
-		expected_drive = ISP16_MITSUMI;
-	else {
-		printk("ISP16: %s not supported by cdrom interface.\n",
-		       isp16_cdrom_type);
-		goto cleanup_out;
-	}
-
-	if (isp16_cdi_config(isp16_cdrom_base, expected_drive,
-			     isp16_cdrom_irq, isp16_cdrom_dma) < 0) {
-		printk
-		    ("ISP16: cdrom interface has not been properly configured.\n");
-		goto cleanup_out;
-	}
-	printk(KERN_INFO
-	       "ISP16: cdrom interface set up with io base 0x%03X, irq %d, dma %d,"
-	       " type %s.\n", isp16_cdrom_base, isp16_cdrom_irq,
-	       isp16_cdrom_dma, isp16_cdrom_type);
-	return 0;
-
-cleanup_out:
-	release_region(ISP16_IO_BASE, ISP16_IO_SIZE);
-out:
-	return -EIO;
-}
-
-static short __init isp16_detect(void)
-{
-
-	if (isp16_c929__detect() >= 0)
-		return 2;
-	else
-		return (isp16_c928__detect());
-}
-
-static short __init isp16_c928__detect(void)
-{
-	u_char ctrl;
-	u_char enable_cdrom;
-	u_char io;
-	short i = -1;
-
-	isp16_ctrl = ISP16_C928__CTRL;
-	isp16_enable_port = ISP16_C928__ENABLE_PORT;
-
-	/* read' and write' are a special read and write, respectively */
-
-	/* read' ISP16_CTRL_PORT, clear last two bits and write' back the result */
-	ctrl = ISP16_IN(ISP16_CTRL_PORT) & 0xFC;
-	ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-
-	/* read' 3,4 and 5-bit from the cdrom enable port */
-	enable_cdrom = ISP16_IN(ISP16_C928__ENABLE_PORT) & 0x38;
-
-	if (!(enable_cdrom & 0x20)) {	/* 5-bit not set */
-		/* read' last 2 bits of ISP16_IO_SET_PORT */
-		io = ISP16_IN(ISP16_IO_SET_PORT) & 0x03;
-		if (((io & 0x01) << 1) == (io & 0x02)) {	/* bits are the same */
-			if (io == 0) {	/* ...the same and 0 */
-				i = 0;
-				enable_cdrom |= 0x20;
-			} else {	/* ...the same and 1 *//* my card, first time 'round */
-				i = 1;
-				enable_cdrom |= 0x28;
-			}
-			ISP16_OUT(ISP16_C928__ENABLE_PORT, enable_cdrom);
-		} else {	/* bits are not the same */
-			ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-			return i;	/* -> not detected: possibly incorrect conclusion */
-		}
-	} else if (enable_cdrom == 0x20)
-		i = 0;
-	else if (enable_cdrom == 0x28)	/* my card, already initialised */
-		i = 1;
-
-	ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-
-	return i;
-}
-
-static short __init isp16_c929__detect(void)
-{
-	u_char ctrl;
-	u_char tmp;
-
-	isp16_ctrl = ISP16_C929__CTRL;
-	isp16_enable_port = ISP16_C929__ENABLE_PORT;
-
-	/* read' and write' are a special read and write, respectively */
-
-	/* read' ISP16_CTRL_PORT and save */
-	ctrl = ISP16_IN(ISP16_CTRL_PORT);
-
-	/* write' zero to the ctrl port and get response */
-	ISP16_OUT(ISP16_CTRL_PORT, 0);
-	tmp = ISP16_IN(ISP16_CTRL_PORT);
-
-	if (tmp != 2)		/* isp16 with 82C929 not detected */
-		return -1;
-
-	/* restore ctrl port value */
-	ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-
-	return 2;
-}
-
-static short __init
-isp16_cdi_config(int base, u_char drive_type, int irq, int dma)
-{
-	u_char base_code;
-	u_char irq_code;
-	u_char dma_code;
-	u_char i;
-
-	if ((drive_type == ISP16_MITSUMI) && (dma != 0))
-		printk("ISP16: Mitsumi cdrom drive has no dma support.\n");
-
-	switch (base) {
-	case 0x340:
-		base_code = ISP16_BASE_340;
-		break;
-	case 0x330:
-		base_code = ISP16_BASE_330;
-		break;
-	case 0x360:
-		base_code = ISP16_BASE_360;
-		break;
-	case 0x320:
-		base_code = ISP16_BASE_320;
-		break;
-	default:
-		printk
-		    ("ISP16: base address 0x%03X not supported by cdrom interface.\n",
-		     base);
-		return -1;
-	}
-	switch (irq) {
-	case 0:
-		irq_code = ISP16_IRQ_X;
-		break;		/* disable irq */
-	case 5:
-		irq_code = ISP16_IRQ_5;
-		printk("ISP16: irq 5 shouldn't be used by cdrom interface,"
-		       " due to possible conflicts with the sound card.\n");
-		break;
-	case 7:
-		irq_code = ISP16_IRQ_7;
-		printk("ISP16: irq 7 shouldn't be used by cdrom interface,"
-		       " due to possible conflicts with the sound card.\n");
-		break;
-	case 3:
-		irq_code = ISP16_IRQ_3;
-		break;
-	case 9:
-		irq_code = ISP16_IRQ_9;
-		break;
-	case 10:
-		irq_code = ISP16_IRQ_10;
-		break;
-	case 11:
-		irq_code = ISP16_IRQ_11;
-		break;
-	default:
-		printk("ISP16: irq %d not supported by cdrom interface.\n",
-		       irq);
-		return -1;
-	}
-	switch (dma) {
-	case 0:
-		dma_code = ISP16_DMA_X;
-		break;		/* disable dma */
-	case 1:
-		printk("ISP16: dma 1 cannot be used by cdrom interface,"
-		       " due to conflict with the sound card.\n");
-		return -1;
-		break;
-	case 3:
-		dma_code = ISP16_DMA_3;
-		break;
-	case 5:
-		dma_code = ISP16_DMA_5;
-		break;
-	case 6:
-		dma_code = ISP16_DMA_6;
-		break;
-	case 7:
-		dma_code = ISP16_DMA_7;
-		break;
-	default:
-		printk("ISP16: dma %d not supported by cdrom interface.\n",
-		       dma);
-		return -1;
-	}
-
-	if (drive_type != ISP16_SONY && drive_type != ISP16_PANASONIC0 &&
-	    drive_type != ISP16_PANASONIC1 && drive_type != ISP16_SANYO0 &&
-	    drive_type != ISP16_SANYO1 && drive_type != ISP16_MITSUMI &&
-	    drive_type != ISP16_DRIVE_X) {
-		printk
-		    ("ISP16: drive type (code 0x%02X) not supported by cdrom"
-		     " interface.\n", drive_type);
-		return -1;
-	}
-
-	/* set type of interface */
-	i = ISP16_IN(ISP16_DRIVE_SET_PORT) & ISP16_DRIVE_SET_MASK;	/* clear some bits */
-	ISP16_OUT(ISP16_DRIVE_SET_PORT, i | drive_type);
-
-	/* enable cdrom on interface with 82C929 chip */
-	if (isp16_type > 1)
-		ISP16_OUT(isp16_enable_port, ISP16_ENABLE_CDROM);
-
-	/* set base address, irq and dma */
-	i = ISP16_IN(ISP16_IO_SET_PORT) & ISP16_IO_SET_MASK;	/* keep some bits */
-	ISP16_OUT(ISP16_IO_SET_PORT, i | base_code | irq_code | dma_code);
-
-	return 0;
-}
-
-static void __exit isp16_exit(void)
-{
-	release_region(ISP16_IO_BASE, ISP16_IO_SIZE);
-	printk(KERN_INFO "ISP16: module released.\n");
-}
-
-module_init(isp16_init);
-module_exit(isp16_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/cdrom/isp16.h b/drivers/cdrom/isp16.h
deleted file mode 100644
index 5bd22c8f7a96..000000000000
--- a/drivers/cdrom/isp16.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* -- isp16.h
- *
- *  Header for detection and initialisation of cdrom interface (only) on
- *  ISP16 (MAD16, Mozart) sound card.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* These are the default values */
-#define ISP16_CDROM_TYPE "Sanyo"
-#define ISP16_CDROM_IO_BASE 0x340
-#define ISP16_CDROM_IRQ 0
-#define ISP16_CDROM_DMA 0
-
-/* Some (Media)Magic */
-/* define types of drive the interface on an ISP16 card may be looking at */
-#define ISP16_DRIVE_X 0x00
-#define ISP16_SONY  0x02
-#define ISP16_PANASONIC0 0x02
-#define ISP16_SANYO0 0x02
-#define ISP16_MITSUMI  0x04
-#define ISP16_PANASONIC1 0x06
-#define ISP16_SANYO1 0x06
-#define ISP16_DRIVE_NOT_USED 0x08  /* not used */
-#define ISP16_DRIVE_SET_MASK 0xF1  /* don't change 0-bit or 4-7-bits*/
-/* ...for port */
-#define ISP16_DRIVE_SET_PORT 0xF8D
-/* set io parameters */
-#define ISP16_BASE_340  0x00
-#define ISP16_BASE_330  0x40
-#define ISP16_BASE_360  0x80
-#define ISP16_BASE_320  0xC0
-#define ISP16_IRQ_X  0x00
-#define ISP16_IRQ_5  0x04  /* shouldn't be used to avoid sound card conflicts */
-#define ISP16_IRQ_7  0x08  /* shouldn't be used to avoid sound card conflicts */
-#define ISP16_IRQ_3  0x0C
-#define ISP16_IRQ_9  0x10
-#define ISP16_IRQ_10  0x14
-#define ISP16_IRQ_11  0x18
-#define ISP16_DMA_X  0x03
-#define ISP16_DMA_3  0x00
-#define ISP16_DMA_5  0x00
-#define ISP16_DMA_6  0x01
-#define ISP16_DMA_7  0x02
-#define ISP16_IO_SET_MASK  0x20  /* don't change 5-bit */
-/* ...for port */
-#define ISP16_IO_SET_PORT  0xF8E
-/* enable the card */
-#define ISP16_C928__ENABLE_PORT  0xF90  /* ISP16 with OPTi 82C928 chip */
-#define ISP16_C929__ENABLE_PORT  0xF91  /* ISP16 with OPTi 82C929 chip */
-#define ISP16_ENABLE_CDROM  0x80  /* seven bit */
-
-/* the magic stuff */
-#define ISP16_CTRL_PORT  0xF8F
-#define ISP16_C928__CTRL  0xE2  /* ISP16 with OPTi 82C928 chip */
-#define ISP16_C929__CTRL  0xE3  /* ISP16 with OPTi 82C929 chip */
-
-#define ISP16_IO_BASE 0xF8D
-#define ISP16_IO_SIZE 5  /* ports used from 0xF8D up to 0xF91 */
diff --git a/drivers/cdrom/mcdx.c b/drivers/cdrom/mcdx.c
deleted file mode 100644
index 972ee9c8247c..000000000000
--- a/drivers/cdrom/mcdx.c
+++ /dev/null
@@ -1,1943 +0,0 @@
-/*
- * The Mitsumi CDROM interface
- * Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de>
- * VERSION: 2.14(hs)
- *
- * ... anyway, I'm back again, thanks to Marcin, he adopted
- * large portions of my code (at least the parts containing
- * my main thoughts ...)
- *
- ****************** H E L P *********************************
- * If you ever plan to update your CD ROM drive and perhaps
- * want to sell or simply give away your Mitsumi FX-001[DS]
- * -- Please --
- * mail me (heiko@lotte.sax.de).  When my last drive goes
- * ballistic no more driver support will be available from me!
- *************************************************************
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Thanks to
- *  The Linux Community at all and ...
- *  Martin Harriss (he wrote the first Mitsumi Driver)
- *  Eberhard Moenkeberg (he gave me much support and the initial kick)
- *  Bernd Huebner, Ruediger Helsch (Unifix-Software GmbH, they
- *      improved the original driver)
- *  Jon Tombs, Bjorn Ekwall (module support)
- *  Daniel v. Mosnenck (he sent me the Technical and Programming Reference)
- *  Gerd Knorr (he lent me his PhotoCD)
- *  Nils Faerber and Roger E. Wolff (extensively tested the LU portion)
- *  Andreas Kies (testing the mysterious hang-ups)
- *  Heiko Eissfeldt (VERIFY_READ/WRITE)
- *  Marcin Dalecki (improved performance, shortened code)
- *  ... somebody forgotten?
- *
- *  9 November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	               Removed init_module & cleanup_module in favor of 
- *		       module_init & module_exit.
- *		       Torben Mathiasen <tmm@image.dk>
- */
-
-
-#ifdef RCS
-static const char *mcdx_c_version
-    = "$Id: mcdx.c,v 1.21 1997/01/26 07:12:59 davem Exp $";
-#endif
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/current.h>
-#include <asm/uaccess.h>
-
-#include <linux/major.h>
-#define MAJOR_NR MITSUMI_X_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-#include "mcdx.h"
-
-#ifndef HZ
-#error HZ not defined
-#endif
-
-#define xwarn(fmt, args...) printk(KERN_WARNING MCDX " " fmt, ## args)
-
-#if !MCDX_QUIET
-#define xinfo(fmt, args...) printk(KERN_INFO MCDX " " fmt, ## args)
-#else
-#define xinfo(fmt, args...) { ; }
-#endif
-
-#if MCDX_DEBUG
-#define xtrace(lvl, fmt, args...) \
-		{ if (lvl > 0) \
-			{ printk(KERN_DEBUG MCDX ":: " fmt, ## args); } }
-#define xdebug(fmt, args...) printk(KERN_DEBUG MCDX ":: " fmt, ## args)
-#else
-#define xtrace(lvl, fmt, args...) { ; }
-#define xdebug(fmt, args...) { ; }
-#endif
-
-/* CONSTANTS *******************************************************/
-
-/* Following are the number of sectors we _request_ from the drive
-   every time an access outside the already requested range is done.
-   The _direct_ size is the number of sectors we're allowed to skip
-   directly (performing a read instead of requesting the new sector
-   needed */
-static const int REQUEST_SIZE = 800;	/* should be less then 255 * 4 */
-static const int DIRECT_SIZE = 400;	/* should be less then REQUEST_SIZE */
-
-enum drivemodes { TOC, DATA, RAW, COOKED };
-enum datamodes { MODE0, MODE1, MODE2 };
-enum resetmodes { SOFT, HARD };
-
-static const int SINGLE = 0x01;		/* single speed drive (FX001S, LU) */
-static const int DOUBLE = 0x02;		/* double speed drive (FX001D, ..? */
-static const int DOOR = 0x04;		/* door locking capability */
-static const int MULTI = 0x08;		/* multi session capability */
-
-static const unsigned char READ1X = 0xc0;
-static const unsigned char READ2X = 0xc1;
-
-
-/* DECLARATIONS ****************************************************/
-struct s_subqcode {
-	unsigned char control;
-	unsigned char tno;
-	unsigned char index;
-	struct cdrom_msf0 tt;
-	struct cdrom_msf0 dt;
-};
-
-struct s_diskinfo {
-	unsigned int n_first;
-	unsigned int n_last;
-	struct cdrom_msf0 msf_leadout;
-	struct cdrom_msf0 msf_first;
-};
-
-struct s_multi {
-	unsigned char multi;
-	struct cdrom_msf0 msf_last;
-};
-
-struct s_version {
-	unsigned char code;
-	unsigned char ver;
-};
-
-/* Per drive/controller stuff **************************************/
-
-struct s_drive_stuff {
-	/* waitqueues */
-	wait_queue_head_t busyq;
-	wait_queue_head_t lockq;
-	wait_queue_head_t sleepq;
-
-	/* flags */
-	volatile int introk;	/* status of last irq operation */
-	volatile int busy;	/* drive performs an operation */
-	volatile int lock;	/* exclusive usage */
-
-	/* cd infos */
-	struct s_diskinfo di;
-	struct s_multi multi;
-	struct s_subqcode *toc;	/* first entry of the toc array */
-	struct s_subqcode start;
-	struct s_subqcode stop;
-	int xa;			/* 1 if xa disk */
-	int audio;		/* 1 if audio disk */
-	int audiostatus;
-
-	/* `buffer' control */
-	volatile int valid;	/* pending, ..., values are valid */
-	volatile int pending;	/* next sector to be read */
-	volatile int low_border;	/* first sector not to be skipped direct */
-	volatile int high_border;	/* first sector `out of area' */
-#ifdef AK2
-	volatile int int_err;
-#endif				/* AK2 */
-
-	/* adds and odds */
-	unsigned wreg_data;	/* w data */
-	unsigned wreg_reset;	/* w hardware reset */
-	unsigned wreg_hcon;	/* w hardware conf */
-	unsigned wreg_chn;	/* w channel */
-	unsigned rreg_data;	/* r data */
-	unsigned rreg_status;	/* r status */
-
-	int irq;		/* irq used by this drive */
-	int present;		/* drive present and its capabilities */
-	unsigned char readcmd;	/* read cmd depends on single/double speed */
-	unsigned char playcmd;	/* play should always be single speed */
-	unsigned int xxx;	/* set if changed, reset while open */
-	unsigned int yyy;	/* set if changed, reset by media_changed */
-	int users;		/* keeps track of open/close */
-	int lastsector;		/* last block accessible */
-	int status;		/* last operation's error / status */
-	int readerrs;		/* # of blocks read w/o error */
-	struct cdrom_device_info info;
-	struct gendisk *disk;
-};
-
-
-/* Prototypes ******************************************************/
-
-/*	The following prototypes are already declared elsewhere.  They are
- 	repeated here to show what's going on.  And to sense, if they're
-	changed elsewhere. */
-
-static int mcdx_init(void);
-
-static int mcdx_block_open(struct inode *inode, struct file *file)
-{
-	struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_open(&p->info, inode, file);
-}
-
-static int mcdx_block_release(struct inode *inode, struct file *file)
-{
-	struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_release(&p->info, file);
-}
-
-static int mcdx_block_ioctl(struct inode *inode, struct file *file,
-				unsigned cmd, unsigned long arg)
-{
-	struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_ioctl(file, &p->info, inode, cmd, arg);
-}
-
-static int mcdx_block_media_changed(struct gendisk *disk)
-{
-	struct s_drive_stuff *p = disk->private_data;
-	return cdrom_media_changed(&p->info);
-}
-
-static struct block_device_operations mcdx_bdops =
-{
-	.owner		= THIS_MODULE,
-	.open		= mcdx_block_open,
-	.release	= mcdx_block_release,
-	.ioctl		= mcdx_block_ioctl,
-	.media_changed	= mcdx_block_media_changed,
-};
-
-
-/*	Indirect exported functions. These functions are exported by their
-	addresses, such as mcdx_open and mcdx_close in the
-	structure mcdx_dops. */
-
-/* exported by file_ops */
-static int mcdx_open(struct cdrom_device_info *cdi, int purpose);
-static void mcdx_close(struct cdrom_device_info *cdi);
-static int mcdx_media_changed(struct cdrom_device_info *cdi, int disc_nr);
-static int mcdx_tray_move(struct cdrom_device_info *cdi, int position);
-static int mcdx_lockdoor(struct cdrom_device_info *cdi, int lock);
-static int mcdx_audio_ioctl(struct cdrom_device_info *cdi,
-			    unsigned int cmd, void *arg);
-
-/* misc internal support functions */
-static void log2msf(unsigned int, struct cdrom_msf0 *);
-static unsigned int msf2log(const struct cdrom_msf0 *);
-static unsigned int uint2bcd(unsigned int);
-static unsigned int bcd2uint(unsigned char);
-static unsigned port(int *);
-static int irq(int *);
-static void mcdx_delay(struct s_drive_stuff *, long jifs);
-static int mcdx_transfer(struct s_drive_stuff *, char *buf, int sector,
-			 int nr_sectors);
-static int mcdx_xfer(struct s_drive_stuff *, char *buf, int sector,
-		     int nr_sectors);
-
-static int mcdx_config(struct s_drive_stuff *, int);
-static int mcdx_requestversion(struct s_drive_stuff *, struct s_version *,
-			       int);
-static int mcdx_stop(struct s_drive_stuff *, int);
-static int mcdx_hold(struct s_drive_stuff *, int);
-static int mcdx_reset(struct s_drive_stuff *, enum resetmodes, int);
-static int mcdx_setdrivemode(struct s_drive_stuff *, enum drivemodes, int);
-static int mcdx_setdatamode(struct s_drive_stuff *, enum datamodes, int);
-static int mcdx_requestsubqcode(struct s_drive_stuff *,
-				struct s_subqcode *, int);
-static int mcdx_requestmultidiskinfo(struct s_drive_stuff *,
-				     struct s_multi *, int);
-static int mcdx_requesttocdata(struct s_drive_stuff *, struct s_diskinfo *,
-			       int);
-static int mcdx_getstatus(struct s_drive_stuff *, int);
-static int mcdx_getval(struct s_drive_stuff *, int to, int delay, char *);
-static int mcdx_talk(struct s_drive_stuff *,
-		     const unsigned char *cmd, size_t,
-		     void *buffer, size_t size, unsigned int timeout, int);
-static int mcdx_readtoc(struct s_drive_stuff *);
-static int mcdx_playtrk(struct s_drive_stuff *, const struct cdrom_ti *);
-static int mcdx_playmsf(struct s_drive_stuff *, const struct cdrom_msf *);
-static int mcdx_setattentuator(struct s_drive_stuff *,
-			       struct cdrom_volctrl *, int);
-
-/* static variables ************************************************/
-
-static int mcdx_drive_map[][2] = MCDX_DRIVEMAP;
-static struct s_drive_stuff *mcdx_stuffp[MCDX_NDRIVES];
-static DEFINE_SPINLOCK(mcdx_lock);
-static struct request_queue *mcdx_queue;
-
-/* You can only set the first two pairs, from old MODULE_PARM code.  */
-static int mcdx_set(const char *val, struct kernel_param *kp)
-{
-	get_options((char *)val, 4, (int *)mcdx_drive_map);
-	return 0;
-}
-module_param_call(mcdx, mcdx_set, NULL, NULL, 0);
-
-static struct cdrom_device_ops mcdx_dops = {
-	.open		= mcdx_open,
-	.release	= mcdx_close,
-	.media_changed	= mcdx_media_changed,
-	.tray_move	= mcdx_tray_move,
-	.lock_door	= mcdx_lockdoor,
-	.audio_ioctl	= mcdx_audio_ioctl,
-	.capability	= CDC_OPEN_TRAY | CDC_LOCK | CDC_MEDIA_CHANGED |
-			  CDC_PLAY_AUDIO | CDC_DRIVE_STATUS,
-};
-
-/* KERNEL INTERFACE FUNCTIONS **************************************/
-
-
-static int mcdx_audio_ioctl(struct cdrom_device_info *cdi,
-			    unsigned int cmd, void *arg)
-{
-	struct s_drive_stuff *stuffp = cdi->handle;
-
-	if (!stuffp->present)
-		return -ENXIO;
-
-	if (stuffp->xxx) {
-		if (-1 == mcdx_requesttocdata(stuffp, &stuffp->di, 1)) {
-			stuffp->lastsector = -1;
-		} else {
-			stuffp->lastsector = (CD_FRAMESIZE / 512)
-			    * msf2log(&stuffp->di.msf_leadout) - 1;
-		}
-
-		if (stuffp->toc) {
-			kfree(stuffp->toc);
-			stuffp->toc = NULL;
-			if (-1 == mcdx_readtoc(stuffp))
-				return -1;
-		}
-
-		stuffp->xxx = 0;
-	}
-
-	switch (cmd) {
-	case CDROMSTART:{
-			xtrace(IOCTL, "ioctl() START\n");
-			/* Spin up the drive.  Don't think we can do this.
-			   * For now, ignore it.
-			 */
-			return 0;
-		}
-
-	case CDROMSTOP:{
-			xtrace(IOCTL, "ioctl() STOP\n");
-			stuffp->audiostatus = CDROM_AUDIO_INVALID;
-			if (-1 == mcdx_stop(stuffp, 1))
-				return -EIO;
-			return 0;
-		}
-
-	case CDROMPLAYTRKIND:{
-			struct cdrom_ti *ti = (struct cdrom_ti *) arg;
-
-			xtrace(IOCTL, "ioctl() PLAYTRKIND\n");
-			if ((ti->cdti_trk0 < stuffp->di.n_first)
-			    || (ti->cdti_trk0 > stuffp->di.n_last)
-			    || (ti->cdti_trk1 < stuffp->di.n_first))
-				return -EINVAL;
-			if (ti->cdti_trk1 > stuffp->di.n_last)
-				ti->cdti_trk1 = stuffp->di.n_last;
-			xtrace(PLAYTRK, "ioctl() track %d to %d\n",
-			       ti->cdti_trk0, ti->cdti_trk1);
-			return mcdx_playtrk(stuffp, ti);
-		}
-
-	case CDROMPLAYMSF:{
-			struct cdrom_msf *msf = (struct cdrom_msf *) arg;
-
-			xtrace(IOCTL, "ioctl() PLAYMSF\n");
-
-			if ((stuffp->audiostatus == CDROM_AUDIO_PLAY)
-			    && (-1 == mcdx_hold(stuffp, 1)))
-				return -EIO;
-
-			msf->cdmsf_min0 = uint2bcd(msf->cdmsf_min0);
-			msf->cdmsf_sec0 = uint2bcd(msf->cdmsf_sec0);
-			msf->cdmsf_frame0 = uint2bcd(msf->cdmsf_frame0);
-
-			msf->cdmsf_min1 = uint2bcd(msf->cdmsf_min1);
-			msf->cdmsf_sec1 = uint2bcd(msf->cdmsf_sec1);
-			msf->cdmsf_frame1 = uint2bcd(msf->cdmsf_frame1);
-
-			stuffp->stop.dt.minute = msf->cdmsf_min1;
-			stuffp->stop.dt.second = msf->cdmsf_sec1;
-			stuffp->stop.dt.frame = msf->cdmsf_frame1;
-
-			return mcdx_playmsf(stuffp, msf);
-		}
-
-	case CDROMRESUME:{
-			xtrace(IOCTL, "ioctl() RESUME\n");
-			return mcdx_playtrk(stuffp, NULL);
-		}
-
-	case CDROMREADTOCENTRY:{
-			struct cdrom_tocentry *entry =
-			    (struct cdrom_tocentry *) arg;
-			struct s_subqcode *tp = NULL;
-			xtrace(IOCTL, "ioctl() READTOCENTRY\n");
-
-			if (-1 == mcdx_readtoc(stuffp))
-				return -1;
-			if (entry->cdte_track == CDROM_LEADOUT)
-				tp = &stuffp->toc[stuffp->di.n_last -
-						  stuffp->di.n_first + 1];
-			else if (entry->cdte_track > stuffp->di.n_last
-				 || entry->cdte_track < stuffp->di.n_first)
-				return -EINVAL;
-			else
-				tp = &stuffp->toc[entry->cdte_track -
-						  stuffp->di.n_first];
-
-			if (NULL == tp)
-				return -EIO;
-			entry->cdte_adr = tp->control;
-			entry->cdte_ctrl = tp->control >> 4;
-			/* Always return stuff in MSF, and let the Uniform cdrom driver
-			   worry about what the user actually wants */
-			entry->cdte_addr.msf.minute =
-			    bcd2uint(tp->dt.minute);
-			entry->cdte_addr.msf.second =
-			    bcd2uint(tp->dt.second);
-			entry->cdte_addr.msf.frame =
-			    bcd2uint(tp->dt.frame);
-			return 0;
-		}
-
-	case CDROMSUBCHNL:{
-			struct cdrom_subchnl *sub =
-			    (struct cdrom_subchnl *) arg;
-			struct s_subqcode q;
-
-			xtrace(IOCTL, "ioctl() SUBCHNL\n");
-
-			if (-1 == mcdx_requestsubqcode(stuffp, &q, 2))
-				return -EIO;
-
-			xtrace(SUBCHNL, "audiostatus: %x\n",
-			       stuffp->audiostatus);
-			sub->cdsc_audiostatus = stuffp->audiostatus;
-			sub->cdsc_adr = q.control;
-			sub->cdsc_ctrl = q.control >> 4;
-			sub->cdsc_trk = bcd2uint(q.tno);
-			sub->cdsc_ind = bcd2uint(q.index);
-
-			xtrace(SUBCHNL, "trk %d, ind %d\n",
-			       sub->cdsc_trk, sub->cdsc_ind);
-			/* Always return stuff in MSF, and let the Uniform cdrom driver
-			   worry about what the user actually wants */
-			sub->cdsc_absaddr.msf.minute =
-			    bcd2uint(q.dt.minute);
-			sub->cdsc_absaddr.msf.second =
-			    bcd2uint(q.dt.second);
-			sub->cdsc_absaddr.msf.frame = bcd2uint(q.dt.frame);
-			sub->cdsc_reladdr.msf.minute =
-			    bcd2uint(q.tt.minute);
-			sub->cdsc_reladdr.msf.second =
-			    bcd2uint(q.tt.second);
-			sub->cdsc_reladdr.msf.frame = bcd2uint(q.tt.frame);
-			xtrace(SUBCHNL,
-			       "msf: abs %02d:%02d:%02d, rel %02d:%02d:%02d\n",
-			       sub->cdsc_absaddr.msf.minute,
-			       sub->cdsc_absaddr.msf.second,
-			       sub->cdsc_absaddr.msf.frame,
-			       sub->cdsc_reladdr.msf.minute,
-			       sub->cdsc_reladdr.msf.second,
-			       sub->cdsc_reladdr.msf.frame);
-
-			return 0;
-		}
-
-	case CDROMREADTOCHDR:{
-			struct cdrom_tochdr *toc =
-			    (struct cdrom_tochdr *) arg;
-
-			xtrace(IOCTL, "ioctl() READTOCHDR\n");
-			toc->cdth_trk0 = stuffp->di.n_first;
-			toc->cdth_trk1 = stuffp->di.n_last;
-			xtrace(TOCHDR,
-			       "ioctl() track0 = %d, track1 = %d\n",
-			       stuffp->di.n_first, stuffp->di.n_last);
-			return 0;
-		}
-
-	case CDROMPAUSE:{
-			xtrace(IOCTL, "ioctl() PAUSE\n");
-			if (stuffp->audiostatus != CDROM_AUDIO_PLAY)
-				return -EINVAL;
-			if (-1 == mcdx_stop(stuffp, 1))
-				return -EIO;
-			stuffp->audiostatus = CDROM_AUDIO_PAUSED;
-			if (-1 ==
-			    mcdx_requestsubqcode(stuffp, &stuffp->start,
-						 1))
-				return -EIO;
-			return 0;
-		}
-
-	case CDROMMULTISESSION:{
-			struct cdrom_multisession *ms =
-			    (struct cdrom_multisession *) arg;
-			xtrace(IOCTL, "ioctl() MULTISESSION\n");
-			/* Always return stuff in LBA, and let the Uniform cdrom driver
-			   worry about what the user actually wants */
-			ms->addr.lba = msf2log(&stuffp->multi.msf_last);
-			ms->xa_flag = !!stuffp->multi.multi;
-			xtrace(MS,
-			       "ioctl() (%d, 0x%08x [%02x:%02x.%02x])\n",
-			       ms->xa_flag, ms->addr.lba,
-			       stuffp->multi.msf_last.minute,
-			       stuffp->multi.msf_last.second,
-			       stuffp->multi.msf_last.frame);
-
-			return 0;
-		}
-
-	case CDROMEJECT:{
-			xtrace(IOCTL, "ioctl() EJECT\n");
-			if (stuffp->users > 1)
-				return -EBUSY;
-			return (mcdx_tray_move(cdi, 1));
-		}
-
-	case CDROMCLOSETRAY:{
-			xtrace(IOCTL, "ioctl() CDROMCLOSETRAY\n");
-			return (mcdx_tray_move(cdi, 0));
-		}
-
-	case CDROMVOLCTRL:{
-			struct cdrom_volctrl *volctrl =
-			    (struct cdrom_volctrl *) arg;
-			xtrace(IOCTL, "ioctl() VOLCTRL\n");
-
-#if 0				/* not tested! */
-			/* adjust for the weirdness of workman (md) */
-			/* can't test it (hs) */
-			volctrl.channel2 = volctrl.channel1;
-			volctrl.channel1 = volctrl.channel3 = 0x00;
-#endif
-			return mcdx_setattentuator(stuffp, volctrl, 2);
-		}
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static void do_mcdx_request(request_queue_t * q)
-{
-	struct s_drive_stuff *stuffp;
-	struct request *req;
-
-      again:
-
-	req = elv_next_request(q);
-	if (!req)
-		return;
-
-	stuffp = req->rq_disk->private_data;
-
-	if (!stuffp->present) {
-		xwarn("do_request(): bad device: %s\n",req->rq_disk->disk_name);
-		xtrace(REQUEST, "end_request(0): bad device\n");
-		end_request(req, 0);
-		return;
-	}
-
-	if (stuffp->audio) {
-		xwarn("do_request() attempt to read from audio cd\n");
-		xtrace(REQUEST, "end_request(0): read from audio\n");
-		end_request(req, 0);
-		return;
-	}
-
-	xtrace(REQUEST, "do_request() (%lu + %lu)\n",
-	       req->sector, req->nr_sectors);
-
-	if (rq_data_dir(req) != READ) {
-		xwarn("do_request(): non-read command to cd!!\n");
-		xtrace(REQUEST, "end_request(0): write\n");
-		end_request(req, 0);
-		return;
-	}
-	else {
-		stuffp->status = 0;
-		while (req->nr_sectors) {
-			int i;
-
-			i = mcdx_transfer(stuffp,
-					  req->buffer,
-					  req->sector,
-					  req->nr_sectors);
-
-			if (i == -1) {
-				end_request(req, 0);
-				goto again;
-			}
-			req->sector += i;
-			req->nr_sectors -= i;
-			req->buffer += (i * 512);
-		}
-		end_request(req, 1);
-		goto again;
-
-		xtrace(REQUEST, "end_request(1)\n");
-		end_request(req, 1);
-	}
-
-	goto again;
-}
-
-static int mcdx_open(struct cdrom_device_info *cdi, int purpose)
-{
-	struct s_drive_stuff *stuffp;
-	xtrace(OPENCLOSE, "open()\n");
-	stuffp = cdi->handle;
-	if (!stuffp->present)
-		return -ENXIO;
-
-	/* Make the modules looking used ... (thanx bjorn).
-	 * But we shouldn't forget to decrement the module counter
-	 * on error return */
-
-	/* this is only done to test if the drive talks with us */
-	if (-1 == mcdx_getstatus(stuffp, 1))
-		return -EIO;
-
-	if (stuffp->xxx) {
-
-		xtrace(OPENCLOSE, "open() media changed\n");
-		stuffp->audiostatus = CDROM_AUDIO_INVALID;
-		stuffp->readcmd = 0;
-		xtrace(OPENCLOSE, "open() Request multisession info\n");
-		if (-1 ==
-		    mcdx_requestmultidiskinfo(stuffp, &stuffp->multi, 6))
-			xinfo("No multidiskinfo\n");
-	} else {
-		/* multisession ? */
-		if (!stuffp->multi.multi)
-			stuffp->multi.msf_last.second = 2;
-
-		xtrace(OPENCLOSE, "open() MS: %d, last @ %02x:%02x.%02x\n",
-		       stuffp->multi.multi,
-		       stuffp->multi.msf_last.minute,
-		       stuffp->multi.msf_last.second,
-		       stuffp->multi.msf_last.frame);
-
-		{;
-		}		/* got multisession information */
-		/* request the disks table of contents (aka diskinfo) */
-		if (-1 == mcdx_requesttocdata(stuffp, &stuffp->di, 1)) {
-
-			stuffp->lastsector = -1;
-
-		} else {
-
-			stuffp->lastsector = (CD_FRAMESIZE / 512)
-			    * msf2log(&stuffp->di.msf_leadout) - 1;
-
-			xtrace(OPENCLOSE,
-			       "open() start %d (%02x:%02x.%02x) %d\n",
-			       stuffp->di.n_first,
-			       stuffp->di.msf_first.minute,
-			       stuffp->di.msf_first.second,
-			       stuffp->di.msf_first.frame,
-			       msf2log(&stuffp->di.msf_first));
-			xtrace(OPENCLOSE,
-			       "open() last %d (%02x:%02x.%02x) %d\n",
-			       stuffp->di.n_last,
-			       stuffp->di.msf_leadout.minute,
-			       stuffp->di.msf_leadout.second,
-			       stuffp->di.msf_leadout.frame,
-			       msf2log(&stuffp->di.msf_leadout));
-		}
-
-		if (stuffp->toc) {
-			xtrace(MALLOC, "open() free old toc @ %p\n",
-			       stuffp->toc);
-			kfree(stuffp->toc);
-
-			stuffp->toc = NULL;
-		}
-
-		xtrace(OPENCLOSE, "open() init irq generation\n");
-		if (-1 == mcdx_config(stuffp, 1))
-			return -EIO;
-#ifdef FALLBACK
-		/* Set the read speed */
-		xwarn("AAA %x AAA\n", stuffp->readcmd);
-		if (stuffp->readerrs)
-			stuffp->readcmd = READ1X;
-		else
-			stuffp->readcmd =
-			    stuffp->present | SINGLE ? READ1X : READ2X;
-		xwarn("XXX %x XXX\n", stuffp->readcmd);
-#else
-		stuffp->readcmd =
-		    stuffp->present | SINGLE ? READ1X : READ2X;
-#endif
-
-		/* try to get the first sector, iff any ... */
-		if (stuffp->lastsector >= 0) {
-			char buf[512];
-			int ans;
-			int tries;
-
-			stuffp->xa = 0;
-			stuffp->audio = 0;
-
-			for (tries = 6; tries; tries--) {
-
-				stuffp->introk = 1;
-
-				xtrace(OPENCLOSE, "open() try as %s\n",
-				       stuffp->xa ? "XA" : "normal");
-				/* set data mode */
-				if (-1 == (ans = mcdx_setdatamode(stuffp,
-								  stuffp->
-								  xa ?
-								  MODE2 :
-								  MODE1,
-								  1))) {
-					/* return -EIO; */
-					stuffp->xa = 0;
-					break;
-				}
-
-				if ((stuffp->audio = e_audio(ans)))
-					break;
-
-				while (0 ==
-				       (ans =
-					mcdx_transfer(stuffp, buf, 0, 1)));
-
-				if (ans == 1)
-					break;
-				stuffp->xa = !stuffp->xa;
-			}
-		}
-		/* xa disks will be read in raw mode, others not */
-		if (-1 == mcdx_setdrivemode(stuffp,
-					    stuffp->xa ? RAW : COOKED,
-					    1))
-			return -EIO;
-		if (stuffp->audio) {
-			xinfo("open() audio disk found\n");
-		} else if (stuffp->lastsector >= 0) {
-			xinfo("open() %s%s disk found\n",
-			      stuffp->xa ? "XA / " : "",
-			      stuffp->multi.
-			      multi ? "Multi Session" : "Single Session");
-		}
-	}
-	stuffp->xxx = 0;
-	stuffp->users++;
-	return 0;
-}
-
-static void mcdx_close(struct cdrom_device_info *cdi)
-{
-	struct s_drive_stuff *stuffp;
-
-	xtrace(OPENCLOSE, "close()\n");
-
-	stuffp = cdi->handle;
-
-	--stuffp->users;
-}
-
-static int mcdx_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-/*	Return: 1 if media changed since last call to this function
-			0 otherwise */
-{
-	struct s_drive_stuff *stuffp;
-
-	xinfo("mcdx_media_changed called for device %s\n", cdi->name);
-
-	stuffp = cdi->handle;
-	mcdx_getstatus(stuffp, 1);
-
-	if (stuffp->yyy == 0)
-		return 0;
-
-	stuffp->yyy = 0;
-	return 1;
-}
-
-#ifndef MODULE
-static int __init mcdx_setup(char *str)
-{
-	int pi[4];
-	(void) get_options(str, ARRAY_SIZE(pi), pi);
-
-	if (pi[0] > 0)
-		mcdx_drive_map[0][0] = pi[1];
-	if (pi[0] > 1)
-		mcdx_drive_map[0][1] = pi[2];
-	return 1;
-}
-
-__setup("mcdx=", mcdx_setup);
-
-#endif
-
-/* DIRTY PART ******************************************************/
-
-static void mcdx_delay(struct s_drive_stuff *stuff, long jifs)
-/* This routine is used for sleeping.
- * A jifs value <0 means NO sleeping,
- *              =0 means minimal sleeping (let the kernel
- *                 run for other processes)
- *              >0 means at least sleep for that amount.
- *	May be we could use a simple count loop w/ jumps to itself, but
- *	I wanna make this independent of cpu speed. [1 jiffy is 1/HZ] sec */
-{
-	if (jifs < 0)
-		return;
-
-	xtrace(SLEEP, "*** delay: sleepq\n");
-	interruptible_sleep_on_timeout(&stuff->sleepq, jifs);
-	xtrace(SLEEP, "delay awoken\n");
-	if (signal_pending(current)) {
-		xtrace(SLEEP, "got signal\n");
-	}
-}
-
-static irqreturn_t mcdx_intr(int irq, void *dev_id)
-{
-	struct s_drive_stuff *stuffp = dev_id;
-	unsigned char b;
-
-#ifdef AK2
-	if (!stuffp->busy && stuffp->pending)
-		stuffp->int_err = 1;
-
-#endif				/* AK2 */
-	/* get the interrupt status */
-	b = inb(stuffp->rreg_status);
-	stuffp->introk = ~b & MCDX_RBIT_DTEN;
-
-	/* NOTE: We only should get interrupts if the data we
-	 * requested are ready to transfer.
-	 * But the drive seems to generate ``asynchronous'' interrupts
-	 * on several error conditions too.  (Despite the err int enable
-	 * setting during initialisation) */
-
-	/* if not ok, read the next byte as the drives status */
-	if (!stuffp->introk) {
-		xtrace(IRQ, "intr() irq %d hw status 0x%02x\n", irq, b);
-		if (~b & MCDX_RBIT_STEN) {
-			xinfo("intr() irq %d    status 0x%02x\n",
-			      irq, inb(stuffp->rreg_data));
-		} else {
-			xinfo("intr() irq %d ambiguous hw status\n", irq);
-		}
-	} else {
-		xtrace(IRQ, "irq() irq %d ok, status %02x\n", irq, b);
-	}
-
-	stuffp->busy = 0;
-	wake_up_interruptible(&stuffp->busyq);
-	return IRQ_HANDLED;
-}
-
-
-static int mcdx_talk(struct s_drive_stuff *stuffp,
-	  const unsigned char *cmd, size_t cmdlen,
-	  void *buffer, size_t size, unsigned int timeout, int tries)
-/* Send a command to the drive, wait for the result.
- * returns -1 on timeout, drive status otherwise
- * If buffer is not zero, the result (length size) is stored there.
- * If buffer is zero the size should be the number of bytes to read
- * from the drive.  These bytes are discarded.
- */
-{
-	int st;
-	char c;
-	int discard;
-
-	/* Somebody wants the data read? */
-	if ((discard = (buffer == NULL)))
-		buffer = &c;
-
-	while (stuffp->lock) {
-		xtrace(SLEEP, "*** talk: lockq\n");
-		interruptible_sleep_on(&stuffp->lockq);
-		xtrace(SLEEP, "talk: awoken\n");
-	}
-
-	stuffp->lock = 1;
-
-	/* An operation other then reading data destroys the
-	   * data already requested and remembered in stuffp->request, ... */
-	stuffp->valid = 0;
-
-#if MCDX_DEBUG & TALK
-	{
-		unsigned char i;
-		xtrace(TALK,
-		       "talk() %d / %d tries, res.size %d, command 0x%02x",
-		       tries, timeout, size, (unsigned char) cmd[0]);
-		for (i = 1; i < cmdlen; i++)
-			xtrace(TALK, " 0x%02x", cmd[i]);
-		xtrace(TALK, "\n");
-	}
-#endif
-
-	/*  give up if all tries are done (bad) or if the status
-	 *  st != -1 (good) */
-	for (st = -1; st == -1 && tries; tries--) {
-
-		char *bp = (char *) buffer;
-		size_t sz = size;
-
-		outsb(stuffp->wreg_data, cmd, cmdlen);
-		xtrace(TALK, "talk() command sent\n");
-
-		/* get the status byte */
-		if (-1 == mcdx_getval(stuffp, timeout, 0, bp)) {
-			xinfo("talk() %02x timed out (status), %d tr%s left\n",
-			     cmd[0], tries - 1, tries == 2 ? "y" : "ies");
-			continue;
-		}
-		st = *bp;
-		sz--;
-		if (!discard)
-			bp++;
-
-		xtrace(TALK, "talk() got status 0x%02x\n", st);
-
-		/* command error? */
-		if (e_cmderr(st)) {
-			xwarn("command error cmd = %02x %s \n",
-			      cmd[0], cmdlen > 1 ? "..." : "");
-			st = -1;
-			continue;
-		}
-
-		/* audio status? */
-		if (stuffp->audiostatus == CDROM_AUDIO_INVALID)
-			stuffp->audiostatus =
-			    e_audiobusy(st) ? CDROM_AUDIO_PLAY :
-			    CDROM_AUDIO_NO_STATUS;
-		else if (stuffp->audiostatus == CDROM_AUDIO_PLAY
-			 && e_audiobusy(st) == 0)
-			stuffp->audiostatus = CDROM_AUDIO_COMPLETED;
-
-		/* media change? */
-		if (e_changed(st)) {
-			xinfo("talk() media changed\n");
-			stuffp->xxx = stuffp->yyy = 1;
-		}
-
-		/* now actually get the data */
-		while (sz--) {
-			if (-1 == mcdx_getval(stuffp, timeout, 0, bp)) {
-				xinfo("talk() %02x timed out (data), %d tr%s left\n",
-				     cmd[0], tries - 1,
-				     tries == 2 ? "y" : "ies");
-				st = -1;
-				break;
-			}
-			if (!discard)
-				bp++;
-			xtrace(TALK, "talk() got 0x%02x\n", *(bp - 1));
-		}
-	}
-
-#if !MCDX_QUIET
-	if (!tries && st == -1)
-		xinfo("talk() giving up\n");
-#endif
-
-	stuffp->lock = 0;
-	wake_up_interruptible(&stuffp->lockq);
-
-	xtrace(TALK, "talk() done with 0x%02x\n", st);
-	return st;
-}
-
-/* MODULE STUFF ***********************************************************/
-
-static int __init __mcdx_init(void)
-{
-	int i;
-	int drives = 0;
-
-	mcdx_init();
-	for (i = 0; i < MCDX_NDRIVES; i++) {
-		if (mcdx_stuffp[i]) {
-			xtrace(INIT, "init_module() drive %d stuff @ %p\n",
-			       i, mcdx_stuffp[i]);
-			drives++;
-		}
-	}
-
-	if (!drives)
-		return -EIO;
-
-	return 0;
-}
-
-static void __exit mcdx_exit(void)
-{
-	int i;
-
-	xinfo("cleanup_module called\n");
-
-	for (i = 0; i < MCDX_NDRIVES; i++) {
-		struct s_drive_stuff *stuffp = mcdx_stuffp[i];
-		if (!stuffp)
-			continue;
-		del_gendisk(stuffp->disk);
-		if (unregister_cdrom(&stuffp->info)) {
-			printk(KERN_WARNING "Can't unregister cdrom mcdx\n");
-			continue;
-		}
-		put_disk(stuffp->disk);
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		free_irq(stuffp->irq, NULL);
-		if (stuffp->toc) {
-			xtrace(MALLOC, "cleanup_module() free toc @ %p\n",
-			       stuffp->toc);
-			kfree(stuffp->toc);
-		}
-		xtrace(MALLOC, "cleanup_module() free stuffp @ %p\n",
-		       stuffp);
-		mcdx_stuffp[i] = NULL;
-		kfree(stuffp);
-	}
-
-	if (unregister_blkdev(MAJOR_NR, "mcdx") != 0) {
-		xwarn("cleanup() unregister_blkdev() failed\n");
-	}
-#if !MCDX_QUIET
-	else
-	xinfo("cleanup() succeeded\n");
-#endif
-	blk_cleanup_queue(mcdx_queue);
-}
-
-#ifdef MODULE
-module_init(__mcdx_init);
-#endif
-module_exit(mcdx_exit);
-
-
-/* Support functions ************************************************/
-
-static int __init mcdx_init_drive(int drive)
-{
-	struct s_version version;
-	struct gendisk *disk;
-	struct s_drive_stuff *stuffp;
-	int size = sizeof(*stuffp);
-	char msg[80];
-
-	xtrace(INIT, "init() try drive %d\n", drive);
-
-	xtrace(INIT, "kmalloc space for stuffpt's\n");
-	xtrace(MALLOC, "init() malloc %d bytes\n", size);
-	if (!(stuffp = kzalloc(size, GFP_KERNEL))) {
-		xwarn("init() malloc failed\n");
-		return 1;
-	}
-
-	disk = alloc_disk(1);
-	if (!disk) {
-		xwarn("init() malloc failed\n");
-		kfree(stuffp);
-		return 1;
-	}
-
-	xtrace(INIT, "init() got %d bytes for drive stuff @ %p\n",
-	       sizeof(*stuffp), stuffp);
-
-	/* set default values */
-	stuffp->present = 0;	/* this should be 0 already */
-	stuffp->toc = NULL;	/* this should be NULL already */
-
-	/* setup our irq and i/o addresses */
-	stuffp->irq = irq(mcdx_drive_map[drive]);
-	stuffp->wreg_data = stuffp->rreg_data = port(mcdx_drive_map[drive]);
-	stuffp->wreg_reset = stuffp->rreg_status = stuffp->wreg_data + 1;
-	stuffp->wreg_hcon = stuffp->wreg_reset + 1;
-	stuffp->wreg_chn = stuffp->wreg_hcon + 1;
-
-	init_waitqueue_head(&stuffp->busyq);
-	init_waitqueue_head(&stuffp->lockq);
-	init_waitqueue_head(&stuffp->sleepq);
-
-	/* check if i/o addresses are available */
-	if (!request_region(stuffp->wreg_data, MCDX_IO_SIZE, "mcdx")) {
-		xwarn("0x%03x,%d: Init failed. "
-		      "I/O ports (0x%03x..0x%03x) already in use.\n",
-		      stuffp->wreg_data, stuffp->irq,
-		      stuffp->wreg_data,
-		      stuffp->wreg_data + MCDX_IO_SIZE - 1);
-		xtrace(MALLOC, "init() free stuffp @ %p\n", stuffp);
-		kfree(stuffp);
-		put_disk(disk);
-		xtrace(INIT, "init() continue at next drive\n");
-		return 0;	/* next drive */
-	}
-
-	xtrace(INIT, "init() i/o port is available at 0x%03x\n"
-	       stuffp->wreg_data);
-	xtrace(INIT, "init() hardware reset\n");
-	mcdx_reset(stuffp, HARD, 1);
-
-	xtrace(INIT, "init() get version\n");
-	if (-1 == mcdx_requestversion(stuffp, &version, 4)) {
-		/* failed, next drive */
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		xwarn("%s=0x%03x,%d: Init failed. Can't get version.\n",
-		      MCDX, stuffp->wreg_data, stuffp->irq);
-		xtrace(MALLOC, "init() free stuffp @ %p\n", stuffp);
-		kfree(stuffp);
-		put_disk(disk);
-		xtrace(INIT, "init() continue at next drive\n");
-		return 0;
-	}
-
-	switch (version.code) {
-	case 'D':
-		stuffp->readcmd = READ2X;
-		stuffp->present = DOUBLE | DOOR | MULTI;
-		break;
-	case 'F':
-		stuffp->readcmd = READ1X;
-		stuffp->present = SINGLE | DOOR | MULTI;
-		break;
-	case 'M':
-		stuffp->readcmd = READ1X;
-		stuffp->present = SINGLE;
-		break;
-	default:
-		stuffp->present = 0;
-		break;
-	}
-
-	stuffp->playcmd = READ1X;
-
-	if (!stuffp->present) {
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		xwarn("%s=0x%03x,%d: Init failed. No Mitsumi CD-ROM?.\n",
-		      MCDX, stuffp->wreg_data, stuffp->irq);
-		kfree(stuffp);
-		put_disk(disk);
-		return 0;	/* next drive */
-	}
-
-	xtrace(INIT, "init() register blkdev\n");
-	if (register_blkdev(MAJOR_NR, "mcdx")) {
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		kfree(stuffp);
-		put_disk(disk);
-		return 1;
-	}
-
-	mcdx_queue = blk_init_queue(do_mcdx_request, &mcdx_lock);
-	if (!mcdx_queue) {
-		unregister_blkdev(MAJOR_NR, "mcdx");
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		kfree(stuffp);
-		put_disk(disk);
-		return 1;
-	}
-
-	xtrace(INIT, "init() subscribe irq and i/o\n");
-	if (request_irq(stuffp->irq, mcdx_intr, IRQF_DISABLED, "mcdx", stuffp)) {
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		xwarn("%s=0x%03x,%d: Init failed. Can't get irq (%d).\n",
-		      MCDX, stuffp->wreg_data, stuffp->irq, stuffp->irq);
-		stuffp->irq = 0;
-		blk_cleanup_queue(mcdx_queue);
-		kfree(stuffp);
-		put_disk(disk);
-		return 0;
-	}
-
-	xtrace(INIT, "init() get garbage\n");
-	{
-		int i;
-		mcdx_delay(stuffp, HZ / 2);
-		for (i = 100; i; i--)
-			(void) inb(stuffp->rreg_status);
-	}
-
-
-#ifdef WE_KNOW_WHY
-	/* irq 11 -> channel register */
-	outb(0x50, stuffp->wreg_chn);
-#endif
-
-	xtrace(INIT, "init() set non dma but irq mode\n");
-	mcdx_config(stuffp, 1);
-
-	stuffp->info.ops = &mcdx_dops;
-	stuffp->info.speed = 2;
-	stuffp->info.capacity = 1;
-	stuffp->info.handle = stuffp;
-	sprintf(stuffp->info.name, "mcdx%d", drive);
-	disk->major = MAJOR_NR;
-	disk->first_minor = drive;
-	strcpy(disk->disk_name, stuffp->info.name);
-	disk->fops = &mcdx_bdops;
-	disk->flags = GENHD_FL_CD;
-	stuffp->disk = disk;
-
-	sprintf(msg, " mcdx: Mitsumi CD-ROM installed at 0x%03x, irq %d."
-		" (Firmware version %c %x)\n",
-		stuffp->wreg_data, stuffp->irq, version.code, version.ver);
-	mcdx_stuffp[drive] = stuffp;
-	xtrace(INIT, "init() mcdx_stuffp[%d] = %p\n", drive, stuffp);
-	if (register_cdrom(&stuffp->info) != 0) {
-		printk("Cannot register Mitsumi CD-ROM!\n");
-		free_irq(stuffp->irq, NULL);
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		kfree(stuffp);
-		put_disk(disk);
-		if (unregister_blkdev(MAJOR_NR, "mcdx") != 0)
-			xwarn("cleanup() unregister_blkdev() failed\n");
-		blk_cleanup_queue(mcdx_queue);
-		return 2;
-	}
-	disk->private_data = stuffp;
-	disk->queue = mcdx_queue;
-	add_disk(disk);
-	printk(msg);
-	return 0;
-}
-
-static int __init mcdx_init(void)
-{
-	int drive;
-	xwarn("Version 2.14(hs) \n");
-
-	xwarn("$Id: mcdx.c,v 1.21 1997/01/26 07:12:59 davem Exp $\n");
-
-	/* zero the pointer array */
-	for (drive = 0; drive < MCDX_NDRIVES; drive++)
-		mcdx_stuffp[drive] = NULL;
-
-	/* do the initialisation */
-	for (drive = 0; drive < MCDX_NDRIVES; drive++) {
-		switch (mcdx_init_drive(drive)) {
-		case 2:
-			return -EIO;
-		case 1:
-			break;
-		}
-	}
-	return 0;
-}
-
-static int mcdx_transfer(struct s_drive_stuff *stuffp,
-	      char *p, int sector, int nr_sectors)
-/*	This seems to do the actually transfer.  But it does more.  It
-	keeps track of errors occurred and will (if possible) fall back
-	to single speed on error.
-	Return:	-1 on timeout or other error
-			else status byte (as in stuff->st) */
-{
-	int ans;
-
-	ans = mcdx_xfer(stuffp, p, sector, nr_sectors);
-	return ans;
-#ifdef FALLBACK
-	if (-1 == ans)
-		stuffp->readerrs++;
-	else
-		return ans;
-
-	if (stuffp->readerrs && stuffp->readcmd == READ1X) {
-		xwarn("XXX Already reading 1x -- no chance\n");
-		return -1;
-	}
-
-	xwarn("XXX Fallback to 1x\n");
-
-	stuffp->readcmd = READ1X;
-	return mcdx_transfer(stuffp, p, sector, nr_sectors);
-#endif
-
-}
-
-
-static int mcdx_xfer(struct s_drive_stuff *stuffp,
-		     char *p, int sector, int nr_sectors)
-/*	This does actually the transfer from the drive.
-	Return:	-1 on timeout or other error
-			else status byte (as in stuff->st) */
-{
-	int border;
-	int done = 0;
-	long timeout;
-
-	if (stuffp->audio) {
-		xwarn("Attempt to read from audio CD.\n");
-		return -1;
-	}
-
-	if (!stuffp->readcmd) {
-		xinfo("Can't transfer from missing disk.\n");
-		return -1;
-	}
-
-	while (stuffp->lock) {
-		interruptible_sleep_on(&stuffp->lockq);
-	}
-
-	if (stuffp->valid && (sector >= stuffp->pending)
-	    && (sector < stuffp->low_border)) {
-
-		/* All (or at least a part of the sectors requested) seems
-		   * to be already requested, so we don't need to bother the
-		   * drive with new requests ...
-		   * Wait for the drive become idle, but first
-		   * check for possible occurred errors --- the drive
-		   * seems to report them asynchronously */
-
-
-		border = stuffp->high_border < (border =
-						sector + nr_sectors)
-		    ? stuffp->high_border : border;
-
-		stuffp->lock = current->pid;
-
-		do {
-
-			while (stuffp->busy) {
-
-				timeout =
-				    interruptible_sleep_on_timeout
-				    (&stuffp->busyq, 5 * HZ);
-
-				if (!stuffp->introk) {
-					xtrace(XFER,
-					       "error via interrupt\n");
-				} else if (!timeout) {
-					xtrace(XFER, "timeout\n");
-				} else if (signal_pending(current)) {
-					xtrace(XFER, "signal\n");
-				} else
-					continue;
-
-				stuffp->lock = 0;
-				stuffp->busy = 0;
-				stuffp->valid = 0;
-
-				wake_up_interruptible(&stuffp->lockq);
-				xtrace(XFER, "transfer() done (-1)\n");
-				return -1;
-			}
-
-			/* check if we need to set the busy flag (as we
-			 * expect an interrupt */
-			stuffp->busy = (3 == (stuffp->pending & 3));
-
-			/* Test if it's the first sector of a block,
-			 * there we have to skip some bytes as we read raw data */
-			if (stuffp->xa && (0 == (stuffp->pending & 3))) {
-				const int HEAD =
-				    CD_FRAMESIZE_RAW - CD_XA_TAIL -
-				    CD_FRAMESIZE;
-				insb(stuffp->rreg_data, p, HEAD);
-			}
-
-			/* now actually read the data */
-			insb(stuffp->rreg_data, p, 512);
-
-			/* test if it's the last sector of a block,
-			 * if so, we have to handle XA special */
-			if ((3 == (stuffp->pending & 3)) && stuffp->xa) {
-				char dummy[CD_XA_TAIL];
-				insb(stuffp->rreg_data, &dummy[0], CD_XA_TAIL);
-			}
-
-			if (stuffp->pending == sector) {
-				p += 512;
-				done++;
-				sector++;
-			}
-		} while (++(stuffp->pending) < border);
-
-		stuffp->lock = 0;
-		wake_up_interruptible(&stuffp->lockq);
-
-	} else {
-
-		/* The requested sector(s) is/are out of the
-		 * already requested range, so we have to bother the drive
-		 * with a new request. */
-
-		static unsigned char cmd[] = {
-			0,
-			0, 0, 0,
-			0, 0, 0
-		};
-
-		cmd[0] = stuffp->readcmd;
-
-		/* The numbers held in ->pending, ..., should be valid */
-		stuffp->valid = 1;
-		stuffp->pending = sector & ~3;
-
-		/* do some sanity checks */
-		if (stuffp->pending > stuffp->lastsector) {
-			xwarn
-			    ("transfer() sector %d from nirvana requested.\n",
-			     stuffp->pending);
-			stuffp->status = MCDX_ST_EOM;
-			stuffp->valid = 0;
-			xtrace(XFER, "transfer() done (-1)\n");
-			return -1;
-		}
-
-		if ((stuffp->low_border = stuffp->pending + DIRECT_SIZE)
-		    > stuffp->lastsector + 1) {
-			xtrace(XFER, "cut low_border\n");
-			stuffp->low_border = stuffp->lastsector + 1;
-		}
-		if ((stuffp->high_border = stuffp->pending + REQUEST_SIZE)
-		    > stuffp->lastsector + 1) {
-			xtrace(XFER, "cut high_border\n");
-			stuffp->high_border = stuffp->lastsector + 1;
-		}
-
-		{		/* Convert the sector to be requested to MSF format */
-			struct cdrom_msf0 pending;
-			log2msf(stuffp->pending / 4, &pending);
-			cmd[1] = pending.minute;
-			cmd[2] = pending.second;
-			cmd[3] = pending.frame;
-		}
-
-		cmd[6] =
-		    (unsigned
-		     char) ((stuffp->high_border - stuffp->pending) / 4);
-		xtrace(XFER, "[%2d]\n", cmd[6]);
-
-		stuffp->busy = 1;
-		/* Now really issue the request command */
-		outsb(stuffp->wreg_data, cmd, sizeof cmd);
-
-	}
-#ifdef AK2
-	if (stuffp->int_err) {
-		stuffp->valid = 0;
-		stuffp->int_err = 0;
-		return -1;
-	}
-#endif				/* AK2 */
-
-	stuffp->low_border = (stuffp->low_border +=
-			      done) <
-	    stuffp->high_border ? stuffp->low_border : stuffp->high_border;
-
-	return done;
-}
-
-
-/*	Access to elements of the mcdx_drive_map members */
-
-static unsigned port(int *ip)
-{
-	return ip[0];
-}
-static int irq(int *ip)
-{
-	return ip[1];
-}
-
-/*	Misc number converters */
-
-static unsigned int bcd2uint(unsigned char c)
-{
-	return (c >> 4) * 10 + (c & 0x0f);
-}
-
-static unsigned int uint2bcd(unsigned int ival)
-{
-	return ((ival / 10) << 4) | (ival % 10);
-}
-
-static void log2msf(unsigned int l, struct cdrom_msf0 *pmsf)
-{
-	l += CD_MSF_OFFSET;
-	pmsf->minute = uint2bcd(l / 4500), l %= 4500;
-	pmsf->second = uint2bcd(l / 75);
-	pmsf->frame = uint2bcd(l % 75);
-}
-
-static unsigned int msf2log(const struct cdrom_msf0 *pmsf)
-{
-	return bcd2uint(pmsf->frame)
-	    + bcd2uint(pmsf->second) * 75
-	    + bcd2uint(pmsf->minute) * 4500 - CD_MSF_OFFSET;
-}
-
-int mcdx_readtoc(struct s_drive_stuff *stuffp)
-/*  Read the toc entries from the CD,
- *  Return: -1 on failure, else 0 */
-{
-
-	if (stuffp->toc) {
-		xtrace(READTOC, "ioctl() toc already read\n");
-		return 0;
-	}
-
-	xtrace(READTOC, "ioctl() readtoc for %d tracks\n",
-	       stuffp->di.n_last - stuffp->di.n_first + 1);
-
-	if (-1 == mcdx_hold(stuffp, 1))
-		return -1;
-
-	xtrace(READTOC, "ioctl() tocmode\n");
-	if (-1 == mcdx_setdrivemode(stuffp, TOC, 1))
-		return -EIO;
-
-	/* all seems to be ok so far ... malloc */
-	{
-		int size;
-		size =
-		    sizeof(struct s_subqcode) * (stuffp->di.n_last -
-						 stuffp->di.n_first + 2);
-
-		xtrace(MALLOC, "ioctl() malloc %d bytes\n", size);
-		stuffp->toc = kmalloc(size, GFP_KERNEL);
-		if (!stuffp->toc) {
-			xwarn("Cannot malloc %d bytes for toc\n", size);
-			mcdx_setdrivemode(stuffp, DATA, 1);
-			return -EIO;
-		}
-	}
-
-	/* now read actually the index */
-	{
-		int trk;
-		int retries;
-
-		for (trk = 0;
-		     trk < (stuffp->di.n_last - stuffp->di.n_first + 1);
-		     trk++)
-			stuffp->toc[trk].index = 0;
-
-		for (retries = 300; retries; retries--) {	/* why 300? */
-			struct s_subqcode q;
-			unsigned int idx;
-
-			if (-1 == mcdx_requestsubqcode(stuffp, &q, 1)) {
-				mcdx_setdrivemode(stuffp, DATA, 1);
-				return -EIO;
-			}
-
-			idx = bcd2uint(q.index);
-
-			if ((idx > 0)
-			    && (idx <= stuffp->di.n_last)
-			    && (q.tno == 0)
-			    && (stuffp->toc[idx - stuffp->di.n_first].
-				index == 0)) {
-				stuffp->toc[idx - stuffp->di.n_first] = q;
-				xtrace(READTOC,
-				       "ioctl() toc idx %d (trk %d)\n",
-				       idx, trk);
-				trk--;
-			}
-			if (trk == 0)
-				break;
-		}
-		memset(&stuffp->
-		       toc[stuffp->di.n_last - stuffp->di.n_first + 1], 0,
-		       sizeof(stuffp->toc[0]));
-		stuffp->toc[stuffp->di.n_last - stuffp->di.n_first +
-			    1].dt = stuffp->di.msf_leadout;
-	}
-
-	/* unset toc mode */
-	xtrace(READTOC, "ioctl() undo toc mode\n");
-	if (-1 == mcdx_setdrivemode(stuffp, DATA, 2))
-		return -EIO;
-
-#if MCDX_DEBUG && READTOC
-	{
-		int trk;
-		for (trk = 0;
-		     trk < (stuffp->di.n_last - stuffp->di.n_first + 2);
-		     trk++)
-			xtrace(READTOC, "ioctl() %d readtoc %02x %02x %02x"
-			       "  %02x:%02x.%02x  %02x:%02x.%02x\n",
-			       trk + stuffp->di.n_first,
-			       stuffp->toc[trk].control,
-			       stuffp->toc[trk].tno,
-			       stuffp->toc[trk].index,
-			       stuffp->toc[trk].tt.minute,
-			       stuffp->toc[trk].tt.second,
-			       stuffp->toc[trk].tt.frame,
-			       stuffp->toc[trk].dt.minute,
-			       stuffp->toc[trk].dt.second,
-			       stuffp->toc[trk].dt.frame);
-	}
-#endif
-
-	return 0;
-}
-
-static int
-mcdx_playmsf(struct s_drive_stuff *stuffp, const struct cdrom_msf *msf)
-{
-	unsigned char cmd[7] = {
-		0, 0, 0, 0, 0, 0, 0
-	};
-
-	if (!stuffp->readcmd) {
-		xinfo("Can't play from missing disk.\n");
-		return -1;
-	}
-
-	cmd[0] = stuffp->playcmd;
-
-	cmd[1] = msf->cdmsf_min0;
-	cmd[2] = msf->cdmsf_sec0;
-	cmd[3] = msf->cdmsf_frame0;
-	cmd[4] = msf->cdmsf_min1;
-	cmd[5] = msf->cdmsf_sec1;
-	cmd[6] = msf->cdmsf_frame1;
-
-	xtrace(PLAYMSF, "ioctl(): play %x "
-	       "%02x:%02x:%02x -- %02x:%02x:%02x\n",
-	       cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], cmd[5], cmd[6]);
-
-	outsb(stuffp->wreg_data, cmd, sizeof cmd);
-
-	if (-1 == mcdx_getval(stuffp, 3 * HZ, 0, NULL)) {
-		xwarn("playmsf() timeout\n");
-		return -1;
-	}
-
-	stuffp->audiostatus = CDROM_AUDIO_PLAY;
-	return 0;
-}
-
-static int
-mcdx_playtrk(struct s_drive_stuff *stuffp, const struct cdrom_ti *ti)
-{
-	struct s_subqcode *p;
-	struct cdrom_msf msf;
-
-	if (-1 == mcdx_readtoc(stuffp))
-		return -1;
-
-	if (ti)
-		p = &stuffp->toc[ti->cdti_trk0 - stuffp->di.n_first];
-	else
-		p = &stuffp->start;
-
-	msf.cdmsf_min0 = p->dt.minute;
-	msf.cdmsf_sec0 = p->dt.second;
-	msf.cdmsf_frame0 = p->dt.frame;
-
-	if (ti) {
-		p = &stuffp->toc[ti->cdti_trk1 - stuffp->di.n_first + 1];
-		stuffp->stop = *p;
-	} else
-		p = &stuffp->stop;
-
-	msf.cdmsf_min1 = p->dt.minute;
-	msf.cdmsf_sec1 = p->dt.second;
-	msf.cdmsf_frame1 = p->dt.frame;
-
-	return mcdx_playmsf(stuffp, &msf);
-}
-
-
-/* Drive functions ************************************************/
-
-static int mcdx_tray_move(struct cdrom_device_info *cdi, int position)
-{
-	struct s_drive_stuff *stuffp = cdi->handle;
-
-	if (!stuffp->present)
-		return -ENXIO;
-	if (!(stuffp->present & DOOR))
-		return -ENOSYS;
-
-	if (position)		/* 1: eject */
-		return mcdx_talk(stuffp, "\xf6", 1, NULL, 1, 5 * HZ, 3);
-	else			/* 0: close */
-		return mcdx_talk(stuffp, "\xf8", 1, NULL, 1, 5 * HZ, 3);
-	return 1;
-}
-
-static int mcdx_stop(struct s_drive_stuff *stuffp, int tries)
-{
-	return mcdx_talk(stuffp, "\xf0", 1, NULL, 1, 2 * HZ, tries);
-}
-
-static int mcdx_hold(struct s_drive_stuff *stuffp, int tries)
-{
-	return mcdx_talk(stuffp, "\x70", 1, NULL, 1, 2 * HZ, tries);
-}
-
-static int mcdx_requestsubqcode(struct s_drive_stuff *stuffp,
-		     struct s_subqcode *sub, int tries)
-{
-	char buf[11];
-	int ans;
-
-	if (-1 == (ans = mcdx_talk(stuffp, "\x20", 1, buf, sizeof(buf),
-				   2 * HZ, tries)))
-		return -1;
-	sub->control = buf[1];
-	sub->tno = buf[2];
-	sub->index = buf[3];
-	sub->tt.minute = buf[4];
-	sub->tt.second = buf[5];
-	sub->tt.frame = buf[6];
-	sub->dt.minute = buf[8];
-	sub->dt.second = buf[9];
-	sub->dt.frame = buf[10];
-
-	return ans;
-}
-
-static int mcdx_requestmultidiskinfo(struct s_drive_stuff *stuffp,
-			  struct s_multi *multi, int tries)
-{
-	char buf[5];
-	int ans;
-
-	if (stuffp->present & MULTI) {
-		ans =
-		    mcdx_talk(stuffp, "\x11", 1, buf, sizeof(buf), 2 * HZ,
-			      tries);
-		multi->multi = buf[1];
-		multi->msf_last.minute = buf[2];
-		multi->msf_last.second = buf[3];
-		multi->msf_last.frame = buf[4];
-		return ans;
-	} else {
-		multi->multi = 0;
-		return 0;
-	}
-}
-
-static int mcdx_requesttocdata(struct s_drive_stuff *stuffp, struct s_diskinfo *info,
-		    int tries)
-{
-	char buf[9];
-	int ans;
-	ans =
-	    mcdx_talk(stuffp, "\x10", 1, buf, sizeof(buf), 2 * HZ, tries);
-	if (ans == -1) {
-		info->n_first = 0;
-		info->n_last = 0;
-	} else {
-		info->n_first = bcd2uint(buf[1]);
-		info->n_last = bcd2uint(buf[2]);
-		info->msf_leadout.minute = buf[3];
-		info->msf_leadout.second = buf[4];
-		info->msf_leadout.frame = buf[5];
-		info->msf_first.minute = buf[6];
-		info->msf_first.second = buf[7];
-		info->msf_first.frame = buf[8];
-	}
-	return ans;
-}
-
-static int mcdx_setdrivemode(struct s_drive_stuff *stuffp, enum drivemodes mode,
-		  int tries)
-{
-	char cmd[2];
-	int ans;
-
-	xtrace(HW, "setdrivemode() %d\n", mode);
-
-	if (-1 == (ans = mcdx_talk(stuffp, "\xc2", 1, cmd, sizeof(cmd), 5 * HZ, tries)))
-		return -1;
-
-	switch (mode) {
-	case TOC:
-		cmd[1] |= 0x04;
-		break;
-	case DATA:
-		cmd[1] &= ~0x04;
-		break;
-	case RAW:
-		cmd[1] |= 0x40;
-		break;
-	case COOKED:
-		cmd[1] &= ~0x40;
-		break;
-	default:
-		break;
-	}
-	cmd[0] = 0x50;
-	return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5 * HZ, tries);
-}
-
-static int mcdx_setdatamode(struct s_drive_stuff *stuffp, enum datamodes mode,
-		 int tries)
-{
-	unsigned char cmd[2] = { 0xa0 };
-	xtrace(HW, "setdatamode() %d\n", mode);
-	switch (mode) {
-	case MODE0:
-		cmd[1] = 0x00;
-		break;
-	case MODE1:
-		cmd[1] = 0x01;
-		break;
-	case MODE2:
-		cmd[1] = 0x02;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5 * HZ, tries);
-}
-
-static int mcdx_config(struct s_drive_stuff *stuffp, int tries)
-{
-	char cmd[4];
-
-	xtrace(HW, "config()\n");
-
-	cmd[0] = 0x90;
-
-	cmd[1] = 0x10;		/* irq enable */
-	cmd[2] = 0x05;		/* pre, err irq enable */
-
-	if (-1 == mcdx_talk(stuffp, cmd, 3, NULL, 1, 1 * HZ, tries))
-		return -1;
-
-	cmd[1] = 0x02;		/* dma select */
-	cmd[2] = 0x00;		/* no dma */
-
-	return mcdx_talk(stuffp, cmd, 3, NULL, 1, 1 * HZ, tries);
-}
-
-static int mcdx_requestversion(struct s_drive_stuff *stuffp, struct s_version *ver,
-		    int tries)
-{
-	char buf[3];
-	int ans;
-
-	if (-1 == (ans = mcdx_talk(stuffp, "\xdc",
-				   1, buf, sizeof(buf), 2 * HZ, tries)))
-		return ans;
-
-	ver->code = buf[1];
-	ver->ver = buf[2];
-
-	return ans;
-}
-
-static int mcdx_reset(struct s_drive_stuff *stuffp, enum resetmodes mode, int tries)
-{
-	if (mode == HARD) {
-		outb(0, stuffp->wreg_chn);	/* no dma, no irq -> hardware */
-		outb(0, stuffp->wreg_reset);	/* hw reset */
-		return 0;
-	} else
-		return mcdx_talk(stuffp, "\x60", 1, NULL, 1, 5 * HZ, tries);
-}
-
-static int mcdx_lockdoor(struct cdrom_device_info *cdi, int lock)
-{
-	struct s_drive_stuff *stuffp = cdi->handle;
-	char cmd[2] = { 0xfe };
-
-	if (!(stuffp->present & DOOR))
-		return -ENOSYS;
-	if (stuffp->present & DOOR) {
-		cmd[1] = lock ? 0x01 : 0x00;
-		return mcdx_talk(stuffp, cmd, sizeof(cmd), NULL, 1, 5 * HZ, 3);
-	} else
-		return 0;
-}
-
-static int mcdx_getstatus(struct s_drive_stuff *stuffp, int tries)
-{
-	return mcdx_talk(stuffp, "\x40", 1, NULL, 1, 5 * HZ, tries);
-}
-
-static int
-mcdx_getval(struct s_drive_stuff *stuffp, int to, int delay, char *buf)
-{
-	unsigned long timeout = to + jiffies;
-	char c;
-
-	if (!buf)
-		buf = &c;
-
-	while (inb(stuffp->rreg_status) & MCDX_RBIT_STEN) {
-		if (time_after(jiffies, timeout))
-			return -1;
-		mcdx_delay(stuffp, delay);
-	}
-
-	*buf = (unsigned char) inb(stuffp->rreg_data) & 0xff;
-
-	return 0;
-}
-
-static int mcdx_setattentuator(struct s_drive_stuff *stuffp,
-		    struct cdrom_volctrl *vol, int tries)
-{
-	char cmd[5];
-	cmd[0] = 0xae;
-	cmd[1] = vol->channel0;
-	cmd[2] = 0;
-	cmd[3] = vol->channel1;
-	cmd[4] = 0;
-
-	return mcdx_talk(stuffp, cmd, sizeof(cmd), NULL, 5, 200, tries);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(MITSUMI_X_CDROM_MAJOR);
diff --git a/drivers/cdrom/mcdx.h b/drivers/cdrom/mcdx.h
deleted file mode 100644
index 83c364a74dc4..000000000000
--- a/drivers/cdrom/mcdx.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Definitions for the Mitsumi CDROM interface
- * Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de>
- * VERSION: @VERSION@
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Thanks to
- *  The Linux Community at all and ...
- *  Martin Harris (he wrote the first Mitsumi Driver)
- *  Eberhard Moenkeberg (he gave me much support and the initial kick)
- *  Bernd Huebner, Ruediger Helsch (Unifix-Software Gmbh, they
- *      improved the original driver)
- *  Jon Tombs, Bjorn Ekwall (module support)
- *  Daniel v. Mosnenck (he sent me the Technical and Programming Reference)
- *  Gerd Knorr (he lent me his PhotoCD)
- *  Nils Faerber and Roger E. Wolff (extensively tested the LU portion)
- *  Andreas Kies (testing the mysterious hang up's)
- *  ... somebody forgotten?
- *  Marcin Dalecki
- *  
- */
-
-/*
- *	The following lines are for user configuration
- *	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *	{0|1} -- 1 if you want the driver detect your drive, may crash and
- *	needs a long time to seek.  The higher the address the longer the
- *	seek.
- *
- *  WARNING: AUTOPROBE doesn't work.
- */
-#define MCDX_AUTOPROBE 0
-
-/*
- *	Drive specific settings according to the jumpers on the controller
- *	board(s).
- *	o	MCDX_NDRIVES  :  number of used entries of the following table
- *	o	MCDX_DRIVEMAP :  table of {i/o base, irq} per controller
- *
- *	NOTE: I didn't get a drive at irq 9(2) working.  Not even alone.
- */
-#if MCDX_AUTOPROBE == 0
-	#define MCDX_NDRIVES 1
-	#define MCDX_DRIVEMAP {		\
-			{0x300, 11},	\
-			{0x304, 05},  	\
-			{0x000, 00},  	\
-			{0x000, 00},  	\
-			{0x000, 00},  	\
-	  	}
-#else
-	#error Autoprobing is not implemented yet.
-#endif
-
-#ifndef MCDX_QUIET
-#define MCDX_QUIET   1
-#endif
-
-#ifndef MCDX_DEBUG
-#define MCDX_DEBUG   0
-#endif
-
-/* *** make the following line uncommented, if you're sure,
- * *** all configuration is done */
-/* #define I_WAS_HERE */
-
-/*	The name of the device */
-#define MCDX "mcdx"	
-
-/* Flags for DEBUGGING */
-#define INIT 		0
-#define MALLOC 		0
-#define IOCTL 		0
-#define PLAYTRK     0
-#define SUBCHNL     0
-#define TOCHDR      0
-#define MS          0
-#define PLAYMSF     0
-#define READTOC     0
-#define OPENCLOSE 	0
-#define HW		    0
-#define TALK		0
-#define IRQ 		0
-#define XFER 		0
-#define REQUEST	 	0
-#define SLEEP		0
-
-/*	The following addresses are taken from the Mitsumi Reference 
- *  and describe the possible i/o range for the controller.
- */
-#define MCDX_IO_BEGIN	((char*) 0x300)	/* first base of i/o addr */
-#define MCDX_IO_END		((char*) 0x3fc)	/* last base of i/o addr */
-
-/*	Per controller 4 bytes i/o are needed. */
-#define MCDX_IO_SIZE		4
-
-/*
- *	Bits
- */
-
-/* The status byte, returned from every command, set if
- * the description is true */
-#define MCDX_RBIT_OPEN       0x80	/* door is open */
-#define MCDX_RBIT_DISKSET    0x40	/* disk set (recognised) */
-#define MCDX_RBIT_CHANGED    0x20	/* disk was changed */
-#define MCDX_RBIT_CHECK      0x10	/* disk rotates, servo is on */
-#define MCDX_RBIT_AUDIOTR    0x08   /* current track is audio */
-#define MCDX_RBIT_RDERR      0x04	/* read error, refer SENSE KEY */
-#define MCDX_RBIT_AUDIOBS    0x02	/* currently playing audio */
-#define MCDX_RBIT_CMDERR     0x01	/* command, param or format error */
-
-/* The I/O Register holding the h/w status of the drive,
- * can be read at i/o base + 1 */
-#define MCDX_RBIT_DOOR       0x10	/* door is open */
-#define MCDX_RBIT_STEN       0x04	/* if 0, i/o base contains drive status */
-#define MCDX_RBIT_DTEN       0x02	/* if 0, i/o base contains data */
-
-/*
- *	The commands.
- */
-
-#define OPCODE	1		/* offset of opcode */
-#define MCDX_CMD_REQUEST_TOC		1, 0x10
-#define MCDX_CMD_REQUEST_STATUS		1, 0x40 
-#define MCDX_CMD_RESET				1, 0x60
-#define MCDX_CMD_REQUEST_DRIVE_MODE	1, 0xc2
-#define MCDX_CMD_SET_INTERLEAVE		2, 0xc8, 0
-#define MCDX_CMD_DATAMODE_SET		2, 0xa0, 0
-	#define MCDX_DATAMODE1		0x01
-	#define MCDX_DATAMODE2		0x02
-#define MCDX_CMD_LOCK_DOOR		2, 0xfe, 0
-
-#define READ_AHEAD			4	/* 8 Sectors (4K) */
-
-/*	Useful macros */
-#define e_door(x)		((x) & MCDX_RBIT_OPEN)
-#define e_check(x)		(~(x) & MCDX_RBIT_CHECK)
-#define e_notset(x)		(~(x) & MCDX_RBIT_DISKSET)
-#define e_changed(x)	((x) & MCDX_RBIT_CHANGED)
-#define e_audio(x)		((x) & MCDX_RBIT_AUDIOTR)
-#define e_audiobusy(x)	((x) & MCDX_RBIT_AUDIOBS)
-#define e_cmderr(x)		((x) & MCDX_RBIT_CMDERR)
-#define e_readerr(x)	((x) & MCDX_RBIT_RDERR)
-
-/**	no drive specific */
-#define MCDX_CDBLK	2048	/* 2048 cooked data each blk */
-
-#define MCDX_DATA_TIMEOUT	(HZ/10)	/* 0.1 second */
-
-/*
- * Access to the msf array
- */
-#define MSF_MIN		0			/* minute */
-#define MSF_SEC		1			/* second */
-#define MSF_FRM		2			/* frame  */
-
-/*
- * Errors
- */
-#define MCDX_E		1			/* unspec error */
-#define MCDX_ST_EOM 0x0100		/* end of media */
-#define MCDX_ST_DRV 0x00ff		/* mask to query the drive status */
-
-#ifndef I_WAS_HERE
-#ifndef MODULE
-#warning You have not edited mcdx.h
-#warning Perhaps irq and i/o settings are wrong.
-#endif
-#endif
-
-/* ex:set ts=4 sw=4: */
diff --git a/drivers/cdrom/optcd.c b/drivers/cdrom/optcd.c
deleted file mode 100644
index efd619c0fe10..000000000000
--- a/drivers/cdrom/optcd.c
+++ /dev/null
@@ -1,2105 +0,0 @@
-/*	linux/drivers/cdrom/optcd.c - Optics Storage 8000 AT CDROM driver
-	$Id: optcd.c,v 1.11 1997/01/26 07:13:00 davem Exp $
-
-	Copyright (C) 1995 Leo Spiekman (spiekman@dutette.et.tudelft.nl)
-
-
-	Based on Aztech CD268 CDROM driver by Werner Zimmermann and preworks
-	by Eberhard Moenkeberg (emoenke@gwdg.de). 
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2, or (at your option)
-	any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/*	Revision history
-
-
-	14-5-95		v0.0	Plays sound tracks. No reading of data CDs yet.
-				Detection of disk change doesn't work.
-	21-5-95		v0.1	First ALPHA version. CD can be mounted. The
-				device major nr is borrowed from the Aztech
-				driver. Speed is around 240 kb/s, as measured
-				with "time dd if=/dev/cdrom of=/dev/null \
-				bs=2048 count=4096".
-	24-6-95		v0.2	Reworked the #defines for the command codes
-				and the like, as well as the structure of
-				the hardware communication protocol, to
-				reflect the "official" documentation, kindly
-				supplied by C.K. Tan, Optics Storage Pte. Ltd.
-				Also tidied up the state machine somewhat.
-	28-6-95		v0.3	Removed the ISP-16 interface code, as this
-				should go into its own driver. The driver now
-				has its own major nr.
-				Disk change detection now seems to work, too.
-				This version became part of the standard
-				kernel as of version 1.3.7
-	24-9-95		v0.4	Re-inserted ISP-16 interface code which I
-				copied from sjcd.c, with a few changes.
-				Updated README.optcd. Submitted for
-				inclusion in 1.3.21
-	29-9-95		v0.4a	Fixed bug that prevented compilation as module
-	25-10-95	v0.5	Started multisession code. Implementation
-				copied from Werner Zimmermann, who copied it
-				from Heiko Schlittermann's mcdx.
-	17-1-96		v0.6	Multisession works; some cleanup too.
-	18-4-96		v0.7	Increased some timing constants;
-				thanks to Luke McFarlane. Also tidied up some
-				printk behaviour. ISP16 initialization
-				is now handled by a separate driver.
-				
-	09-11-99 	  	Make kernel-parameter implementation work with 2.3.x 
-	                 	Removed init_module & cleanup_module in favor of 
-			 	module_init & module_exit.
-			 	Torben Mathiasen <tmm@image.dk>
-*/
-
-/* Includes */
-
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <linux/blkdev.h>
-
-#include <linux/cdrom.h>
-#include "optcd.h"
-
-#include <asm/uaccess.h>
-
-#define MAJOR_NR OPTICS_CDROM_MAJOR
-#define QUEUE (opt_queue)
-#define CURRENT elv_next_request(opt_queue)
-
-
-/* Debug support */
-
-
-/* Don't forget to add new debug flags here. */
-#if DEBUG_DRIVE_IF | DEBUG_VFS | DEBUG_CONV | DEBUG_TOC | \
-    DEBUG_BUFFERS | DEBUG_REQUEST | DEBUG_STATE | DEBUG_MULTIS
-#define DEBUG(x) debug x
-static void debug(int debug_this, const char* fmt, ...)
-{
-	char s[1024];
-	va_list args;
-
-	if (!debug_this)
-		return;
-
-	va_start(args, fmt);
-	vsnprintf(s, sizeof(s), fmt, args);
-	printk(KERN_DEBUG "optcd: %s\n", s);
-	va_end(args);
-}
-#else
-#define DEBUG(x)
-#endif
-
-
-/* Drive hardware/firmware characteristics
-   Identifiers in accordance with Optics Storage documentation */
-
-
-#define optcd_port optcd			/* Needed for the modutils. */
-static short optcd_port = OPTCD_PORTBASE;	/* I/O base of drive. */
-module_param(optcd_port, short, 0);
-/* Drive registers, read */
-#define DATA_PORT	optcd_port	/* Read data/status */
-#define STATUS_PORT	optcd_port+1	/* Indicate data/status availability */
-
-/* Drive registers, write */
-#define COMIN_PORT	optcd_port	/* For passing command/parameter */
-#define RESET_PORT	optcd_port+1	/* Write anything and wait 0.5 sec */
-#define HCON_PORT	optcd_port+2	/* Host Xfer Configuration */
-
-
-/* Command completion/status read from DATA register */
-#define ST_DRVERR		0x80
-#define ST_DOOR_OPEN		0x40
-#define ST_MIXEDMODE_DISK	0x20
-#define ST_MODE_BITS		0x1c
-#define ST_M_STOP		0x00
-#define ST_M_READ		0x04
-#define ST_M_AUDIO		0x04
-#define ST_M_PAUSE		0x08
-#define ST_M_INITIAL		0x0c
-#define ST_M_ERROR		0x10
-#define ST_M_OTHERS		0x14
-#define	ST_MODE2TRACK		0x02
-#define	ST_DSK_CHG		0x01
-#define ST_L_LOCK		0x01
-#define ST_CMD_OK		0x00
-#define ST_OP_OK		0x01
-#define ST_PA_OK		0x02
-#define ST_OP_ERROR		0x05
-#define ST_PA_ERROR		0x06
-
-
-/* Error codes (appear as command completion code from DATA register) */
-/* Player related errors */
-#define ERR_ILLCMD	0x11	/* Illegal command to player module */
-#define ERR_ILLPARM	0x12	/* Illegal parameter to player module */
-#define ERR_SLEDGE	0x13
-#define ERR_FOCUS	0x14
-#define ERR_MOTOR	0x15
-#define ERR_RADIAL	0x16
-#define ERR_PLL		0x17	/* PLL lock error */
-#define ERR_SUB_TIM	0x18	/* Subcode timeout error */
-#define ERR_SUB_NF	0x19	/* Subcode not found error */
-#define ERR_TRAY	0x1a
-#define ERR_TOC		0x1b	/* Table of Contents read error */
-#define ERR_JUMP	0x1c
-/* Data errors */
-#define ERR_MODE	0x21
-#define ERR_FORM	0x22
-#define ERR_HEADADDR	0x23	/* Header Address not found */
-#define ERR_CRC		0x24
-#define ERR_ECC		0x25	/* Uncorrectable ECC error */
-#define ERR_CRC_UNC	0x26	/* CRC error and uncorrectable error */
-#define ERR_ILLBSYNC	0x27	/* Illegal block sync error */
-#define ERR_VDST	0x28	/* VDST not found */
-/* Timeout errors */
-#define ERR_READ_TIM	0x31	/* Read timeout error */
-#define ERR_DEC_STP	0x32	/* Decoder stopped */
-#define ERR_DEC_TIM	0x33	/* Decoder interrupt timeout error */
-/* Function abort codes */
-#define ERR_KEY		0x41	/* Key -Detected abort */
-#define ERR_READ_FINISH	0x42	/* Read Finish */
-/* Second Byte diagnostic codes */
-#define ERR_NOBSYNC	0x01	/* No block sync */
-#define ERR_SHORTB	0x02	/* Short block */
-#define ERR_LONGB	0x03	/* Long block */
-#define ERR_SHORTDSP	0x04	/* Short DSP word */
-#define ERR_LONGDSP	0x05	/* Long DSP word */
-
-
-/* Status availability flags read from STATUS register */
-#define FL_EJECT	0x20
-#define FL_WAIT		0x10	/* active low */
-#define FL_EOP		0x08	/* active low */
-#define FL_STEN		0x04	/* Status available when low */
-#define FL_DTEN		0x02	/* Data available when low */
-#define FL_DRQ		0x01	/* active low */
-#define FL_RESET	0xde	/* These bits are high after a reset */
-#define FL_STDT		(FL_STEN|FL_DTEN)
-
-
-/* Transfer mode, written to HCON register */
-#define HCON_DTS	0x08
-#define HCON_SDRQB	0x04
-#define HCON_LOHI	0x02
-#define HCON_DMA16	0x01
-
-
-/* Drive command set, written to COMIN register */
-/* Quick response commands */
-#define COMDRVST	0x20	/* Drive Status Read */
-#define COMERRST	0x21	/* Error Status Read */
-#define COMIOCTLISTAT	0x22	/* Status Read; reset disk changed bit */
-#define COMINITSINGLE	0x28	/* Initialize Single Speed */
-#define COMINITDOUBLE	0x29	/* Initialize Double Speed */
-#define COMUNLOCK	0x30	/* Unlock */
-#define COMLOCK		0x31	/* Lock */
-#define COMLOCKST	0x32	/* Lock/Unlock Status */
-#define COMVERSION	0x40	/* Get Firmware Revision */
-#define COMVOIDREADMODE	0x50	/* Void Data Read Mode */
-/* Read commands */
-#define COMFETCH	0x60	/* Prefetch Data */
-#define COMREAD		0x61	/* Read */
-#define COMREADRAW	0x62	/* Read Raw Data */
-#define COMREADALL	0x63	/* Read All 2646 Bytes */
-/* Player control commands */
-#define COMLEADIN	0x70	/* Seek To Lead-in */
-#define COMSEEK		0x71	/* Seek */
-#define COMPAUSEON	0x80	/* Pause On */
-#define COMPAUSEOFF	0x81	/* Pause Off */
-#define COMSTOP		0x82	/* Stop */
-#define COMOPEN		0x90	/* Open Tray Door */
-#define COMCLOSE	0x91	/* Close Tray Door */
-#define COMPLAY		0xa0	/* Audio Play */
-#define COMPLAY_TNO	0xa2	/* Audio Play By Track Number */
-#define COMSUBQ		0xb0	/* Read Sub-q Code */
-#define COMLOCATION	0xb1	/* Read Head Position */
-/* Audio control commands */
-#define COMCHCTRL	0xc0	/* Audio Channel Control */
-/* Miscellaneous (test) commands */
-#define COMDRVTEST	0xd0	/* Write Test Bytes */
-#define COMTEST		0xd1	/* Diagnostic Test */
-
-/* Low level drive interface. Only here we do actual I/O
-   Waiting for status / data available */
-
-
-/* Busy wait until FLAG goes low. Return 0 on timeout. */
-static inline int flag_low(int flag, unsigned long timeout)
-{
-	int flag_high;
-	unsigned long count = 0;
-
-	while ((flag_high = (inb(STATUS_PORT) & flag)))
-		if (++count >= timeout)
-			break;
-
-	DEBUG((DEBUG_DRIVE_IF, "flag_low 0x%x count %ld%s",
-		flag, count, flag_high ? " timeout" : ""));
-	return !flag_high;
-}
-
-
-/* Timed waiting for status or data */
-static int sleep_timeout;	/* max # of ticks to sleep */
-static DECLARE_WAIT_QUEUE_HEAD(waitq);
-static void sleep_timer(unsigned long data);
-static DEFINE_TIMER(delay_timer, sleep_timer, 0, 0);
-static DEFINE_SPINLOCK(optcd_lock);
-static struct request_queue *opt_queue;
-
-/* Timer routine: wake up when desired flag goes low,
-   or when timeout expires. */
-static void sleep_timer(unsigned long data)
-{
-	int flags = inb(STATUS_PORT) & FL_STDT;
-
-	if (flags == FL_STDT && --sleep_timeout > 0) {
-		mod_timer(&delay_timer, jiffies + HZ/100); /* multi-statement macro */
-	} else
-		wake_up(&waitq);
-}
-
-
-/* Sleep until FLAG goes low. Return 0 on timeout or wrong flag low. */
-static int sleep_flag_low(int flag, unsigned long timeout)
-{
-	int flag_high;
-
-	DEBUG((DEBUG_DRIVE_IF, "sleep_flag_low"));
-
-	sleep_timeout = timeout;
-	flag_high = inb(STATUS_PORT) & flag;
-	if (flag_high && sleep_timeout > 0) {
-		mod_timer(&delay_timer, jiffies + HZ/100);
-		sleep_on(&waitq);
-		flag_high = inb(STATUS_PORT) & flag;
-	}
-
-	DEBUG((DEBUG_DRIVE_IF, "flag 0x%x count %ld%s",
-		flag, timeout, flag_high ? " timeout" : ""));
-	return !flag_high;
-}
-
-/* Low level drive interface. Only here we do actual I/O
-   Sending commands and parameters */
-
-
-/* Errors in the command protocol */
-#define ERR_IF_CMD_TIMEOUT	0x100
-#define ERR_IF_ERR_TIMEOUT	0x101
-#define ERR_IF_RESP_TIMEOUT	0x102
-#define ERR_IF_DATA_TIMEOUT	0x103
-#define ERR_IF_NOSTAT		0x104
-
-
-/* Send command code. Return <0 indicates error */
-static int send_cmd(int cmd)
-{
-	unsigned char ack;
-
-	DEBUG((DEBUG_DRIVE_IF, "sending command 0x%02x\n", cmd));
-
-	outb(HCON_DTS, HCON_PORT);	/* Enable Suspend Data Transfer */
-	outb(cmd, COMIN_PORT);		/* Send command code */
-	if (!flag_low(FL_STEN, BUSY_TIMEOUT))	/* Wait for status */
-		return -ERR_IF_CMD_TIMEOUT;
-	ack = inb(DATA_PORT);		/* read command acknowledge */
-	outb(HCON_SDRQB, HCON_PORT);	/* Disable Suspend Data Transfer */
-	return ack==ST_OP_OK ? 0 : -ack;
-}
-
-
-/* Send command parameters. Return <0 indicates error */
-static int send_params(struct cdrom_msf *params)
-{
-	unsigned char ack;
-
-	DEBUG((DEBUG_DRIVE_IF, "sending parameters"
-		" %02x:%02x:%02x"
-		" %02x:%02x:%02x",
-		params->cdmsf_min0,
-		params->cdmsf_sec0,
-		params->cdmsf_frame0,
-		params->cdmsf_min1,
-		params->cdmsf_sec1,
-		params->cdmsf_frame1));
-
-	outb(params->cdmsf_min0, COMIN_PORT);
-	outb(params->cdmsf_sec0, COMIN_PORT);
-	outb(params->cdmsf_frame0, COMIN_PORT);
-	outb(params->cdmsf_min1, COMIN_PORT);
-	outb(params->cdmsf_sec1, COMIN_PORT);
-	outb(params->cdmsf_frame1, COMIN_PORT);
-	if (!flag_low(FL_STEN, BUSY_TIMEOUT))	/* Wait for status */
-		return -ERR_IF_CMD_TIMEOUT;
-	ack = inb(DATA_PORT);		/* read command acknowledge */
-	return ack==ST_PA_OK ? 0 : -ack;
-}
-
-
-/* Send parameters for SEEK command. Return <0 indicates error */
-static int send_seek_params(struct cdrom_msf *params)
-{
-	unsigned char ack;
-
-	DEBUG((DEBUG_DRIVE_IF, "sending seek parameters"
-		" %02x:%02x:%02x",
-		params->cdmsf_min0,
-		params->cdmsf_sec0,
-		params->cdmsf_frame0));
-
-	outb(params->cdmsf_min0, COMIN_PORT);
-	outb(params->cdmsf_sec0, COMIN_PORT);
-	outb(params->cdmsf_frame0, COMIN_PORT);
-	if (!flag_low(FL_STEN, BUSY_TIMEOUT))	/* Wait for status */
-		return -ERR_IF_CMD_TIMEOUT;
-	ack = inb(DATA_PORT);		/* read command acknowledge */
-	return ack==ST_PA_OK ? 0 : -ack;
-}
-
-
-/* Wait for command execution status. Choice between busy waiting
-   and sleeping. Return value <0 indicates timeout. */
-static inline int get_exec_status(int busy_waiting)
-{
-	unsigned char exec_status;
-
-	if (busy_waiting
-	    ? !flag_low(FL_STEN, BUSY_TIMEOUT)
-	    : !sleep_flag_low(FL_STEN, SLEEP_TIMEOUT))
-		return -ERR_IF_CMD_TIMEOUT;
-
-	exec_status = inb(DATA_PORT);
-	DEBUG((DEBUG_DRIVE_IF, "returned exec status 0x%02x", exec_status));
-	return exec_status;
-}
-
-
-/* Wait busy for extra byte of data that a command returns.
-   Return value <0 indicates timeout. */
-static inline int get_data(int short_timeout)
-{
-	unsigned char data;
-
-	if (!flag_low(FL_STEN, short_timeout ? FAST_TIMEOUT : BUSY_TIMEOUT))
-		return -ERR_IF_DATA_TIMEOUT;
-
-	data = inb(DATA_PORT);
-	DEBUG((DEBUG_DRIVE_IF, "returned data 0x%02x", data));
-	return data;
-}
-
-
-/* Returns 0 if failed */
-static int reset_drive(void)
-{
-	unsigned long count = 0;
-	int flags;
-
-	DEBUG((DEBUG_DRIVE_IF, "reset drive"));
-
-	outb(0, RESET_PORT);
-	while (++count < RESET_WAIT)
-		inb(DATA_PORT);
-
-	count = 0;
-	while ((flags = (inb(STATUS_PORT) & FL_RESET)) != FL_RESET)
-		if (++count >= BUSY_TIMEOUT)
-			break;
-
-	DEBUG((DEBUG_DRIVE_IF, "reset %s",
-		flags == FL_RESET ? "succeeded" : "failed"));
-
-	if (flags != FL_RESET)
-		return 0;		/* Reset failed */
-	outb(HCON_SDRQB, HCON_PORT);	/* Disable Suspend Data Transfer */
-	return 1;			/* Reset succeeded */
-}
-
-
-/* Facilities for asynchronous operation */
-
-/* Read status/data availability flags FL_STEN and FL_DTEN */
-static inline int stdt_flags(void)
-{
-	return inb(STATUS_PORT) & FL_STDT;
-}
-
-
-/* Fetch status that has previously been waited for. <0 means not available */
-static inline int fetch_status(void)
-{
-	unsigned char status;
-
-	if (inb(STATUS_PORT) & FL_STEN)
-		return -ERR_IF_NOSTAT;
-
-	status = inb(DATA_PORT);
-	DEBUG((DEBUG_DRIVE_IF, "fetched exec status 0x%02x", status));
-	return status;
-}
-
-
-/* Fetch data that has previously been waited for. */
-static inline void fetch_data(char *buf, int n)
-{
-	insb(DATA_PORT, buf, n);
-	DEBUG((DEBUG_DRIVE_IF, "fetched 0x%x bytes", n));
-}
-
-
-/* Flush status and data fifos */
-static inline void flush_data(void)
-{
-	while ((inb(STATUS_PORT) & FL_STDT) != FL_STDT)
-		inb(DATA_PORT);
-	DEBUG((DEBUG_DRIVE_IF, "flushed fifos"));
-}
-
-/* Command protocol */
-
-
-/* Send a simple command and wait for response. Command codes < COMFETCH
-   are quick response commands */
-static inline int exec_cmd(int cmd)
-{
-	int ack = send_cmd(cmd);
-	if (ack < 0)
-		return ack;
-	return get_exec_status(cmd < COMFETCH);
-}
-
-
-/* Send a command with parameters. Don't wait for the response,
- * which consists of data blocks read from the CD. */
-static inline int exec_read_cmd(int cmd, struct cdrom_msf *params)
-{
-	int ack = send_cmd(cmd);
-	if (ack < 0)
-		return ack;
-	return send_params(params);
-}
-
-
-/* Send a seek command with parameters and wait for response */
-static inline int exec_seek_cmd(int cmd, struct cdrom_msf *params)
-{
-	int ack = send_cmd(cmd);
-	if (ack < 0)
-		return ack;
-	ack = send_seek_params(params);
-	if (ack < 0)
-		return ack;
-	return 0;
-}
-
-
-/* Send a command with parameters and wait for response */
-static inline int exec_long_cmd(int cmd, struct cdrom_msf *params)
-{
-	int ack = exec_read_cmd(cmd, params);
-	if (ack < 0)
-		return ack;
-	return get_exec_status(0);
-}
-
-/* Address conversion routines */
-
-
-/* Binary to BCD (2 digits) */
-static inline void single_bin2bcd(u_char *p)
-{
-	DEBUG((DEBUG_CONV, "bin2bcd %02d", *p));
-	*p = (*p % 10) | ((*p / 10) << 4);
-}
-
-
-/* Convert entire msf struct */
-static void bin2bcd(struct cdrom_msf *msf)
-{
-	single_bin2bcd(&msf->cdmsf_min0);
-	single_bin2bcd(&msf->cdmsf_sec0);
-	single_bin2bcd(&msf->cdmsf_frame0);
-	single_bin2bcd(&msf->cdmsf_min1);
-	single_bin2bcd(&msf->cdmsf_sec1);
-	single_bin2bcd(&msf->cdmsf_frame1);
-}
-
-
-/* Linear block address to minute, second, frame form */
-#define CD_FPM	(CD_SECS * CD_FRAMES)	/* frames per minute */
-
-static void lba2msf(int lba, struct cdrom_msf *msf)
-{
-	DEBUG((DEBUG_CONV, "lba2msf %d", lba));
-	lba += CD_MSF_OFFSET;
-	msf->cdmsf_min0 = lba / CD_FPM; lba %= CD_FPM;
-	msf->cdmsf_sec0 = lba / CD_FRAMES;
-	msf->cdmsf_frame0 = lba % CD_FRAMES;
-	msf->cdmsf_min1 = 0;
-	msf->cdmsf_sec1 = 0;
-	msf->cdmsf_frame1 = 0;
-	bin2bcd(msf);
-}
-
-
-/* Two BCD digits to binary */
-static inline u_char bcd2bin(u_char bcd)
-{
-	DEBUG((DEBUG_CONV, "bcd2bin %x%02x", bcd));
-	return (bcd >> 4) * 10 + (bcd & 0x0f);
-}
-
-
-static void msf2lba(union cdrom_addr *addr)
-{
-	addr->lba = addr->msf.minute * CD_FPM
-	            + addr->msf.second * CD_FRAMES
-	            + addr->msf.frame - CD_MSF_OFFSET;
-}
-
-
-/* Minute, second, frame address BCD to binary or to linear address,
-   depending on MODE */
-static void msf_bcd2bin(union cdrom_addr *addr)
-{
-	addr->msf.minute = bcd2bin(addr->msf.minute);
-	addr->msf.second = bcd2bin(addr->msf.second);
-	addr->msf.frame = bcd2bin(addr->msf.frame);
-}
-
-/* High level drive commands */
-
-
-static int audio_status = CDROM_AUDIO_NO_STATUS;
-static char toc_uptodate = 0;
-static char disk_changed = 1;
-
-/* Get drive status, flagging completion of audio play and disk changes. */
-static int drive_status(void)
-{
-	int status;
-
-	status = exec_cmd(COMIOCTLISTAT);
-	DEBUG((DEBUG_DRIVE_IF, "IOCTLISTAT: %03x", status));
-	if (status < 0)
-		return status;
-	if (status == 0xff)	/* No status available */
-		return -ERR_IF_NOSTAT;
-
-	if (((status & ST_MODE_BITS) != ST_M_AUDIO) &&
-		(audio_status == CDROM_AUDIO_PLAY)) {
-		audio_status = CDROM_AUDIO_COMPLETED;
-	}
-
-	if (status & ST_DSK_CHG) {
-		toc_uptodate = 0;
-		disk_changed = 1;
-		audio_status = CDROM_AUDIO_NO_STATUS;
-	}
-
-	return status;
-}
-
-
-/* Read the current Q-channel info. Also used for reading the
-   table of contents. qp->cdsc_format must be set on entry to
-   indicate the desired address format */
-static int get_q_channel(struct cdrom_subchnl *qp)
-{
-	int status, d1, d2, d3, d4, d5, d6, d7, d8, d9, d10;
-
-	status = drive_status();
-	if (status < 0)
-		return status;
-	qp->cdsc_audiostatus = audio_status;
-
-	status = exec_cmd(COMSUBQ);
-	if (status < 0)
-		return status;
-
-	d1 = get_data(0);
-	if (d1 < 0)
-		return d1;
-	qp->cdsc_adr = d1;
-	qp->cdsc_ctrl = d1 >> 4;
-
-	d2 = get_data(0);
-	if (d2 < 0)
-		return d2;
-	qp->cdsc_trk = bcd2bin(d2);
-
-	d3 = get_data(0);
-	if (d3 < 0)
-		return d3;
-	qp->cdsc_ind = bcd2bin(d3);
-
-	d4 = get_data(0);
-	if (d4 < 0)
-		return d4;
-	qp->cdsc_reladdr.msf.minute = d4;
-
-	d5 = get_data(0);
-	if (d5 < 0)
-		return d5;
-	qp->cdsc_reladdr.msf.second = d5;
-
-	d6 = get_data(0);
-	if (d6 < 0)
-		return d6;
-	qp->cdsc_reladdr.msf.frame = d6;
-
-	d7 = get_data(0);
-	if (d7 < 0)
-		return d7;
-	/* byte not used */
-
-	d8 = get_data(0);
-	if (d8 < 0)
-		return d8;
-	qp->cdsc_absaddr.msf.minute = d8;
-
-	d9 = get_data(0);
-	if (d9 < 0)
-		return d9;
-	qp->cdsc_absaddr.msf.second = d9;
-
-	d10 = get_data(0);
-	if (d10 < 0)
-		return d10;
-	qp->cdsc_absaddr.msf.frame = d10;
-
-	DEBUG((DEBUG_TOC, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
-		d1, d2, d3, d4, d5, d6, d7, d8, d9, d10));
-
-	msf_bcd2bin(&qp->cdsc_absaddr);
-	msf_bcd2bin(&qp->cdsc_reladdr);
-	if (qp->cdsc_format == CDROM_LBA) {
-		msf2lba(&qp->cdsc_absaddr);
-		msf2lba(&qp->cdsc_reladdr);
-	}
-
-	return 0;
-}
-
-/* Table of contents handling */
-
-
-/* Errors in table of contents */
-#define ERR_TOC_MISSINGINFO	0x120
-#define ERR_TOC_MISSINGENTRY	0x121
-
-
-struct cdrom_disk_info {
-	unsigned char		first;
-	unsigned char		last;
-	struct cdrom_msf0	disk_length;
-	struct cdrom_msf0	first_track;
-	/* Multisession info: */
-	unsigned char		next;
-	struct cdrom_msf0	next_session;
-	struct cdrom_msf0	last_session;
-	unsigned char		multi;
-	unsigned char		xa;
-	unsigned char		audio;
-};
-static struct cdrom_disk_info disk_info;
-
-#define MAX_TRACKS		111
-static struct cdrom_subchnl toc[MAX_TRACKS];
-
-#define QINFO_FIRSTTRACK	100 /* bcd2bin(0xa0) */
-#define QINFO_LASTTRACK		101 /* bcd2bin(0xa1) */
-#define QINFO_DISKLENGTH	102 /* bcd2bin(0xa2) */
-#define QINFO_NEXTSESSION	110 /* bcd2bin(0xb0) */
-
-#define I_FIRSTTRACK	0x01
-#define I_LASTTRACK	0x02
-#define I_DISKLENGTH	0x04
-#define I_NEXTSESSION	0x08
-#define I_ALL	(I_FIRSTTRACK | I_LASTTRACK | I_DISKLENGTH)
-
-
-#if DEBUG_TOC
-static void toc_debug_info(int i)
-{
-	printk(KERN_DEBUG "#%3d ctl %1x, adr %1x, track %2d index %3d"
-		"  %2d:%02d.%02d %2d:%02d.%02d\n",
-		i, toc[i].cdsc_ctrl, toc[i].cdsc_adr,
-		toc[i].cdsc_trk, toc[i].cdsc_ind,
-		toc[i].cdsc_reladdr.msf.minute,
-		toc[i].cdsc_reladdr.msf.second,
-		toc[i].cdsc_reladdr.msf.frame,
-		toc[i].cdsc_absaddr.msf.minute,
-		toc[i].cdsc_absaddr.msf.second,
-		toc[i].cdsc_absaddr.msf.frame);
-}
-#endif
-
-
-static int read_toc(void)
-{
-	int status, limit, count;
-	unsigned char got_info = 0;
-	struct cdrom_subchnl q_info;
-#if DEBUG_TOC
-	int i;
-#endif
-
-	DEBUG((DEBUG_TOC, "starting read_toc"));
-
-	count = 0;
-	for (limit = 60; limit > 0; limit--) {
-		int index;
-
-		q_info.cdsc_format = CDROM_MSF;
-		status = get_q_channel(&q_info);
-		if (status < 0)
-			return status;
-
-		index = q_info.cdsc_ind;
-		if (index > 0 && index < MAX_TRACKS
-		    && q_info.cdsc_trk == 0 && toc[index].cdsc_ind == 0) {
-			toc[index] = q_info;
-			DEBUG((DEBUG_TOC, "got %d", index));
-			if (index < 100)
-				count++;
-
-			switch (q_info.cdsc_ind) {
-			case QINFO_FIRSTTRACK:
-				got_info |= I_FIRSTTRACK;
-				break;
-			case QINFO_LASTTRACK:
-				got_info |= I_LASTTRACK;
-				break;
-			case QINFO_DISKLENGTH:
-				got_info |= I_DISKLENGTH;
-				break;
-			case QINFO_NEXTSESSION:
-				got_info |= I_NEXTSESSION;
-				break;
-			}
-		}
-
-		if ((got_info & I_ALL) == I_ALL
-		    && toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute + count
-		       >= toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute + 1)
-			break;
-	}
-
-	/* Construct disk_info from TOC */
-	if (disk_info.first == 0) {
-		disk_info.first = toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute;
-		disk_info.first_track.minute =
-			toc[disk_info.first].cdsc_absaddr.msf.minute;
-		disk_info.first_track.second =
-			toc[disk_info.first].cdsc_absaddr.msf.second;
-		disk_info.first_track.frame =
-			toc[disk_info.first].cdsc_absaddr.msf.frame;
-	}
-	disk_info.last = toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute;
-	disk_info.disk_length.minute =
-			toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.minute;
-	disk_info.disk_length.second =
-			toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.second-2;
-	disk_info.disk_length.frame =
-			toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.frame;
-	disk_info.next_session.minute =
-			toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.minute;
-	disk_info.next_session.second =
-			toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.second;
-	disk_info.next_session.frame =
-			toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.frame;
-	disk_info.next = toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute;
-	disk_info.last_session.minute =
-			toc[disk_info.next].cdsc_absaddr.msf.minute;
-	disk_info.last_session.second =
-			toc[disk_info.next].cdsc_absaddr.msf.second;
-	disk_info.last_session.frame =
-			toc[disk_info.next].cdsc_absaddr.msf.frame;
-	toc[disk_info.last + 1].cdsc_absaddr.msf.minute =
-			disk_info.disk_length.minute;
-	toc[disk_info.last + 1].cdsc_absaddr.msf.second =
-			disk_info.disk_length.second;
-	toc[disk_info.last + 1].cdsc_absaddr.msf.frame =
-			disk_info.disk_length.frame;
-#if DEBUG_TOC
-	for (i = 1; i <= disk_info.last + 1; i++)
-		toc_debug_info(i);
-	toc_debug_info(QINFO_FIRSTTRACK);
-	toc_debug_info(QINFO_LASTTRACK);
-	toc_debug_info(QINFO_DISKLENGTH);
-	toc_debug_info(QINFO_NEXTSESSION);
-#endif
-
-	DEBUG((DEBUG_TOC, "exiting read_toc, got_info %x, count %d",
-		got_info, count));
-	if ((got_info & I_ALL) != I_ALL
-	    || toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute + count
-	       < toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute + 1)
-		return -ERR_TOC_MISSINGINFO;
-	return 0;
-}
-
-
-#ifdef MULTISESSION
-static int get_multi_disk_info(void)
-{
-	int sessions, status;
-	struct cdrom_msf multi_index;
-
-
-	for (sessions = 2; sessions < 10 /* %%for now */; sessions++) {
-		int count;
-
-		for (count = 100; count < MAX_TRACKS; count++) 
-			toc[count].cdsc_ind = 0;
-
-		multi_index.cdmsf_min0 = disk_info.next_session.minute;
-		multi_index.cdmsf_sec0 = disk_info.next_session.second;
-		multi_index.cdmsf_frame0 = disk_info.next_session.frame;
-		if (multi_index.cdmsf_sec0 >= 20)
-			multi_index.cdmsf_sec0 -= 20;
-		else {
-			multi_index.cdmsf_sec0 += 40;
-			multi_index.cdmsf_min0--;
-		}
-		DEBUG((DEBUG_MULTIS, "Try %d: %2d:%02d.%02d", sessions,
-			multi_index.cdmsf_min0,
-			multi_index.cdmsf_sec0,
-			multi_index.cdmsf_frame0));
-		bin2bcd(&multi_index);
-		multi_index.cdmsf_min1 = 0;
-		multi_index.cdmsf_sec1 = 0;
-		multi_index.cdmsf_frame1 = 1;
-
-		status = exec_read_cmd(COMREAD, &multi_index);
-		if (status < 0) {
-			DEBUG((DEBUG_TOC, "exec_read_cmd COMREAD: %02x",
-				-status));
-			break;
-		}
-		status = sleep_flag_low(FL_DTEN, MULTI_SEEK_TIMEOUT) ?
-				0 : -ERR_TOC_MISSINGINFO;
-		flush_data();
-		if (status < 0) {
-			DEBUG((DEBUG_TOC, "sleep_flag_low: %02x", -status));
-			break;
-		}
-
-		status = read_toc();
-		if (status < 0) {
-			DEBUG((DEBUG_TOC, "read_toc: %02x", -status));
-			break;
-		}
-
-		disk_info.multi = 1;
-	}
-
-	exec_cmd(COMSTOP);
-
-	if (status < 0)
-		return -EIO;
-	return 0;
-}
-#endif /* MULTISESSION */
-
-
-static int update_toc(void)
-{
-	int status, count;
-
-	if (toc_uptodate)
-		return 0;
-
-	DEBUG((DEBUG_TOC, "starting update_toc"));
-
-	disk_info.first = 0;
-	for (count = 0; count < MAX_TRACKS; count++) 
-		toc[count].cdsc_ind = 0;
-
-	status = exec_cmd(COMLEADIN);
-	if (status < 0)
-		return -EIO;
-
-	status = read_toc();
-	if (status < 0) {
-		DEBUG((DEBUG_TOC, "read_toc: %02x", -status));
-		return -EIO;
-	}
-
-        /* Audio disk detection. Look at first track. */
-	disk_info.audio =
-		(toc[disk_info.first].cdsc_ctrl & CDROM_DATA_TRACK) ? 0 : 1;
-
-	/* XA detection */
-	disk_info.xa = drive_status() & ST_MODE2TRACK;
-
-	/* Multisession detection: if we want this, define MULTISESSION */
-	disk_info.multi = 0;
-#ifdef MULTISESSION
- 	if (disk_info.xa)
-		get_multi_disk_info();	/* Here disk_info.multi is set */
-#endif /* MULTISESSION */
-	if (disk_info.multi)
-		printk(KERN_WARNING "optcd: Multisession support experimental, "
-			"see Documentation/cdrom/optcd\n");
-
-	DEBUG((DEBUG_TOC, "exiting update_toc"));
-
-	toc_uptodate = 1;
-	return 0;
-}
-
-/* Request handling */
-
-static int current_valid(void)
-{
-        return CURRENT &&
-		rq_data_dir(CURRENT) == READ &&
-		CURRENT->sector != -1;
-}
-
-/* Buffers for block size conversion. */
-#define NOBUF		-1
-
-static char buf[CD_FRAMESIZE * N_BUFS];
-static volatile int buf_bn[N_BUFS], next_bn;
-static volatile int buf_in = 0, buf_out = NOBUF;
-
-static inline void opt_invalidate_buffers(void)
-{
-	int i;
-
-	DEBUG((DEBUG_BUFFERS, "executing opt_invalidate_buffers"));
-
-	for (i = 0; i < N_BUFS; i++)
-		buf_bn[i] = NOBUF;
-	buf_out = NOBUF;
-}
-
-
-/* Take care of the different block sizes between cdrom and Linux.
-   When Linux gets variable block sizes this will probably go away. */
-static void transfer(void)
-{
-#if DEBUG_BUFFERS | DEBUG_REQUEST
-	printk(KERN_DEBUG "optcd: executing transfer\n");
-#endif
-
-	if (!current_valid())
-		return;
-	while (CURRENT -> nr_sectors) {
-		int bn = CURRENT -> sector / 4;
-		int i, offs, nr_sectors;
-		for (i = 0; i < N_BUFS && buf_bn[i] != bn; ++i);
-
-		DEBUG((DEBUG_REQUEST, "found %d", i));
-
-		if (i >= N_BUFS) {
-			buf_out = NOBUF;
-			break;
-		}
-
-		offs = (i * 4 + (CURRENT -> sector & 3)) * 512;
-		nr_sectors = 4 - (CURRENT -> sector & 3);
-
-		if (buf_out != i) {
-			buf_out = i;
-			if (buf_bn[i] != bn) {
-				buf_out = NOBUF;
-				continue;
-			}
-		}
-
-		if (nr_sectors > CURRENT -> nr_sectors)
-			nr_sectors = CURRENT -> nr_sectors;
-		memcpy(CURRENT -> buffer, buf + offs, nr_sectors * 512);
-		CURRENT -> nr_sectors -= nr_sectors;
-		CURRENT -> sector += nr_sectors;
-		CURRENT -> buffer += nr_sectors * 512;
-	}
-}
-
-
-/* State machine for reading disk blocks */
-
-enum state_e {
-	S_IDLE,		/* 0 */
-	S_START,	/* 1 */
-	S_READ,		/* 2 */
-	S_DATA,		/* 3 */
-	S_STOP,		/* 4 */
-	S_STOPPING	/* 5 */
-};
-
-static volatile enum state_e state = S_IDLE;
-#if DEBUG_STATE
-static volatile enum state_e state_old = S_STOP;
-static volatile int flags_old = 0;
-static volatile long state_n = 0;
-#endif
-
-
-/* Used as mutex to keep do_optcd_request (and other processes calling
-   ioctl) out while some process is inside a VFS call.
-   Reverse is accomplished by checking if state = S_IDLE upon entry
-   of opt_ioctl and opt_media_change. */
-static int in_vfs = 0;
-
-
-static volatile int transfer_is_active = 0;
-static volatile int error = 0;	/* %% do something with this?? */
-static int tries;		/* ibid?? */
-static int timeout = 0;
-
-static void poll(unsigned long data);
-static struct timer_list req_timer = {.function = poll};
-
-
-static void poll(unsigned long data)
-{
-	static volatile int read_count = 1;
-	int flags;
-	int loop_again = 1;
-	int status = 0;
-	int skip = 0;
-
-	if (error) {
-		printk(KERN_ERR "optcd: I/O error 0x%02x\n", error);
-		opt_invalidate_buffers();
-		if (!tries--) {
-			printk(KERN_ERR "optcd: read block %d failed;"
-				" Giving up\n", next_bn);
-			if (transfer_is_active)
-				loop_again = 0;
-			if (current_valid())
-				end_request(CURRENT, 0);
-			tries = 5;
-		}
-		error = 0;
-		state = S_STOP;
-	}
-
-	while (loop_again)
-	{
-		loop_again = 0; /* each case must flip this back to 1 if we want
-		                 to come back up here */
-
-#if DEBUG_STATE
-		if (state == state_old)
-			state_n++;
-		else {
-			state_old = state;
-			if (++state_n > 1)
-				printk(KERN_DEBUG "optcd: %ld times "
-					"in previous state\n", state_n);
-			printk(KERN_DEBUG "optcd: state %d\n", state);
-			state_n = 0;
-		}
-#endif
-
-		switch (state) {
-		case S_IDLE:
-			return;
-		case S_START:
-			if (in_vfs)
-				break;
-			if (send_cmd(COMDRVST)) {
-				state = S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-			state = S_READ;
-			timeout = READ_TIMEOUT;
-			break;
-		case S_READ: {
-			struct cdrom_msf msf;
-			if (!skip) {
-				status = fetch_status();
-				if (status < 0)
-					break;
-				if (status & ST_DSK_CHG) {
-					toc_uptodate = 0;
-					opt_invalidate_buffers();
-				}
-			}
-			skip = 0;
-			if ((status & ST_DOOR_OPEN) || (status & ST_DRVERR)) {
-				toc_uptodate = 0;
-				opt_invalidate_buffers();
-				printk(KERN_WARNING "optcd: %s\n",
-					(status & ST_DOOR_OPEN)
-					? "door open"
-					: "disk removed");
-				state = S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-			if (!current_valid()) {
-				state = S_STOP;
-				loop_again = 1;
-				break;
-			}
-			next_bn = CURRENT -> sector / 4;
-			lba2msf(next_bn, &msf);
-			read_count = N_BUFS;
-			msf.cdmsf_frame1 = read_count; /* Not BCD! */
-
-			DEBUG((DEBUG_REQUEST, "reading %x:%x.%x %x:%x.%x",
-				msf.cdmsf_min0,
-				msf.cdmsf_sec0,
-				msf.cdmsf_frame0,
-				msf.cdmsf_min1,
-				msf.cdmsf_sec1,
-				msf.cdmsf_frame1));
-			DEBUG((DEBUG_REQUEST, "next_bn:%d buf_in:%d"
-				" buf_out:%d buf_bn:%d",
-				next_bn,
-				buf_in,
-				buf_out,
-				buf_bn[buf_in]));
-
-			exec_read_cmd(COMREAD, &msf);
-			state = S_DATA;
-			timeout = READ_TIMEOUT;
-			break;
-		}
-		case S_DATA:
-			flags = stdt_flags() & (FL_STEN|FL_DTEN);
-
-#if DEBUG_STATE
-			if (flags != flags_old) {
-				flags_old = flags;
-				printk(KERN_DEBUG "optcd: flags:%x\n", flags);
-			}
-			if (flags == FL_STEN)
-				printk(KERN_DEBUG "timeout cnt: %d\n", timeout);
-#endif
-
-			switch (flags) {
-			case FL_DTEN:		/* only STEN low */
-				if (!tries--) {
-					printk(KERN_ERR
-						"optcd: read block %d failed; "
-						"Giving up\n", next_bn);
-					if (transfer_is_active) {
-						tries = 0;
-						break;
-					}
-					if (current_valid())
-						end_request(CURRENT, 0);
-					tries = 5;
-				}
-				state = S_START;
-				timeout = READ_TIMEOUT;
-				loop_again = 1;
-			case (FL_STEN|FL_DTEN):	 /* both high */
-				break;
-			default:	/* DTEN low */
-				tries = 5;
-				if (!current_valid() && buf_in == buf_out) {
-					state = S_STOP;
-					loop_again = 1;
-					break;
-				}
-				if (read_count<=0)
-					printk(KERN_WARNING
-						"optcd: warning - try to read"
-						" 0 frames\n");
-				while (read_count) {
-					buf_bn[buf_in] = NOBUF;
-					if (!flag_low(FL_DTEN, BUSY_TIMEOUT)) {
-					/* should be no waiting here!?? */
-						printk(KERN_ERR
-						   "read_count:%d "
-						   "CURRENT->nr_sectors:%ld "
-						   "buf_in:%d\n",
-							read_count,
-							CURRENT->nr_sectors,
-							buf_in);
-						printk(KERN_ERR
-							"transfer active: %x\n",
-							transfer_is_active);
-						read_count = 0;
-						state = S_STOP;
-						loop_again = 1;
-						end_request(CURRENT, 0);
-						break;
-					}
-					fetch_data(buf+
-					    CD_FRAMESIZE*buf_in,
-					    CD_FRAMESIZE);
-					read_count--;
-
-					DEBUG((DEBUG_REQUEST,
-						"S_DATA; ---I've read data- "
-						"read_count: %d",
-						read_count));
-					DEBUG((DEBUG_REQUEST,
-						"next_bn:%d  buf_in:%d "
-						"buf_out:%d  buf_bn:%d",
-						next_bn,
-						buf_in,
-						buf_out,
-						buf_bn[buf_in]));
-
-					buf_bn[buf_in] = next_bn++;
-					if (buf_out == NOBUF)
-						buf_out = buf_in;
-					buf_in = buf_in + 1 ==
-						N_BUFS ? 0 : buf_in + 1;
-				}
-				if (!transfer_is_active) {
-					while (current_valid()) {
-						transfer();
-						if (CURRENT -> nr_sectors == 0)
-							end_request(CURRENT, 1);
-						else
-							break;
-					}
-				}
-
-				if (current_valid()
-				    && (CURRENT -> sector / 4 < next_bn ||
-				    CURRENT -> sector / 4 >
-				     next_bn + N_BUFS)) {
-					state = S_STOP;
-					loop_again = 1;
-					break;
-				}
-				timeout = READ_TIMEOUT;
-				if (read_count == 0) {
-					state = S_STOP;
-					loop_again = 1;
-					break;
-				}
-			}
-			break;
-		case S_STOP:
-			if (read_count != 0)
-				printk(KERN_ERR
-					"optcd: discard data=%x frames\n",
-					read_count);
-			flush_data();
-			if (send_cmd(COMDRVST)) {
-				state = S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-			state = S_STOPPING;
-			timeout = STOP_TIMEOUT;
-			break;
-		case S_STOPPING:
-			status = fetch_status();
-			if (status < 0 && timeout)
-					break;
-			if ((status >= 0) && (status & ST_DSK_CHG)) {
-				toc_uptodate = 0;
-				opt_invalidate_buffers();
-			}
-			if (current_valid()) {
-				if (status >= 0) {
-					state = S_READ;
-					loop_again = 1;
-					skip = 1;
-					break;
-				} else {
-					state = S_START;
-					timeout = 1;
-				}
-			} else {
-				state = S_IDLE;
-				return;
-			}
-			break;
-		default:
-			printk(KERN_ERR "optcd: invalid state %d\n", state);
-			return;
-		} /* case */
-	} /* while */
-
-	if (!timeout--) {
-		printk(KERN_ERR "optcd: timeout in state %d\n", state);
-		state = S_STOP;
-		if (exec_cmd(COMSTOP) < 0) {
-			state = S_IDLE;
-			while (current_valid())
-				end_request(CURRENT, 0);
-			return;
-		}
-	}
-
-	mod_timer(&req_timer, jiffies + HZ/100);
-}
-
-
-static void do_optcd_request(request_queue_t * q)
-{
-	DEBUG((DEBUG_REQUEST, "do_optcd_request(%ld+%ld)",
-	       CURRENT -> sector, CURRENT -> nr_sectors));
-
-	if (disk_info.audio) {
-		printk(KERN_WARNING "optcd: tried to mount an Audio CD\n");
-		end_request(CURRENT, 0);
-		return;
-	}
-
-	transfer_is_active = 1;
-	while (current_valid()) {
-		transfer();	/* First try to transfer block from buffers */
-		if (CURRENT -> nr_sectors == 0) {
-			end_request(CURRENT, 1);
-		} else {	/* Want to read a block not in buffer */
-			buf_out = NOBUF;
-			if (state == S_IDLE) {
-				/* %% Should this block the request queue?? */
-				if (update_toc() < 0) {
-					while (current_valid())
-						end_request(CURRENT, 0);
-					break;
-				}
-				/* Start state machine */
-				state = S_START;
-				timeout = READ_TIMEOUT;
-				tries = 5;
-				/* %% why not start right away?? */
-				mod_timer(&req_timer, jiffies + HZ/100);
-			}
-			break;
-		}
-	}
-	transfer_is_active = 0;
-
-	DEBUG((DEBUG_REQUEST, "next_bn:%d  buf_in:%d buf_out:%d  buf_bn:%d",
-	       next_bn, buf_in, buf_out, buf_bn[buf_in]));
-	DEBUG((DEBUG_REQUEST, "do_optcd_request ends"));
-}
-
-/* IOCTLs */
-
-
-static char auto_eject = 0;
-
-static int cdrompause(void)
-{
-	int status;
-
-	if (audio_status != CDROM_AUDIO_PLAY)
-		return -EINVAL;
-
-	status = exec_cmd(COMPAUSEON);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_cmd COMPAUSEON: %02x", -status));
-		return -EIO;
-	}
-	audio_status = CDROM_AUDIO_PAUSED;
-	return 0;
-}
-
-
-static int cdromresume(void)
-{
-	int status;
-
-	if (audio_status != CDROM_AUDIO_PAUSED)
-		return -EINVAL;
-
-	status = exec_cmd(COMPAUSEOFF);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_cmd COMPAUSEOFF: %02x", -status));
-		audio_status = CDROM_AUDIO_ERROR;
-		return -EIO;
-	}
-	audio_status = CDROM_AUDIO_PLAY;
-	return 0;
-}
-
-
-static int cdromplaymsf(void __user *arg)
-{
-	int status;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&msf, arg, sizeof msf))
-		return -EFAULT;
-
-	bin2bcd(&msf);
-	status = exec_long_cmd(COMPLAY, &msf);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_long_cmd COMPLAY: %02x", -status));
-		audio_status = CDROM_AUDIO_ERROR;
-		return -EIO;
-	}
-
-	audio_status = CDROM_AUDIO_PLAY;
-	return 0;
-}
-
-
-static int cdromplaytrkind(void __user *arg)
-{
-	int status;
-	struct cdrom_ti ti;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&ti, arg, sizeof ti))
-		return -EFAULT;
-
-	if (ti.cdti_trk0 < disk_info.first
-	    || ti.cdti_trk0 > disk_info.last
-	    || ti.cdti_trk1 < ti.cdti_trk0)
-		return -EINVAL;
-	if (ti.cdti_trk1 > disk_info.last)
-		ti.cdti_trk1 = disk_info.last;
-
-	msf.cdmsf_min0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.minute;
-	msf.cdmsf_sec0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.second;
-	msf.cdmsf_frame0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.frame;
-	msf.cdmsf_min1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.minute;
-	msf.cdmsf_sec1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.second;
-	msf.cdmsf_frame1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.frame;
-
-	DEBUG((DEBUG_VFS, "play %02d:%02d.%02d to %02d:%02d.%02d",
-		msf.cdmsf_min0,
-		msf.cdmsf_sec0,
-		msf.cdmsf_frame0,
-		msf.cdmsf_min1,
-		msf.cdmsf_sec1,
-		msf.cdmsf_frame1));
-
-	bin2bcd(&msf);
-	status = exec_long_cmd(COMPLAY, &msf);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_long_cmd COMPLAY: %02x", -status));
-		audio_status = CDROM_AUDIO_ERROR;
-		return -EIO;
-	}
-
-	audio_status = CDROM_AUDIO_PLAY;
-	return 0;
-}
-
-
-static int cdromreadtochdr(void __user *arg)
-{
-	struct cdrom_tochdr tochdr;
-
-	tochdr.cdth_trk0 = disk_info.first;
-	tochdr.cdth_trk1 = disk_info.last;
-
-	return copy_to_user(arg, &tochdr, sizeof tochdr) ? -EFAULT : 0;
-}
-
-
-static int cdromreadtocentry(void __user *arg)
-{
-	struct cdrom_tocentry entry;
-	struct cdrom_subchnl *tocptr;
-
-	if (copy_from_user(&entry, arg, sizeof entry))
-		return -EFAULT;
-
-	if (entry.cdte_track == CDROM_LEADOUT)
-		tocptr = &toc[disk_info.last + 1];
-	else if (entry.cdte_track > disk_info.last
-		|| entry.cdte_track < disk_info.first)
-		return -EINVAL;
-	else
-		tocptr = &toc[entry.cdte_track];
-
-	entry.cdte_adr = tocptr->cdsc_adr;
-	entry.cdte_ctrl = tocptr->cdsc_ctrl;
-	entry.cdte_addr.msf.minute = tocptr->cdsc_absaddr.msf.minute;
-	entry.cdte_addr.msf.second = tocptr->cdsc_absaddr.msf.second;
-	entry.cdte_addr.msf.frame = tocptr->cdsc_absaddr.msf.frame;
-	/* %% What should go into entry.cdte_datamode? */
-
-	if (entry.cdte_format == CDROM_LBA)
-		msf2lba(&entry.cdte_addr);
-	else if (entry.cdte_format != CDROM_MSF)
-		return -EINVAL;
-
-	return copy_to_user(arg, &entry, sizeof entry) ? -EFAULT : 0;
-}
-
-
-static int cdromvolctrl(void __user *arg)
-{
-	int status;
-	struct cdrom_volctrl volctrl;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&volctrl, arg, sizeof volctrl))
-		return -EFAULT;
-
-	msf.cdmsf_min0 = 0x10;
-	msf.cdmsf_sec0 = 0x32;
-	msf.cdmsf_frame0 = volctrl.channel0;
-	msf.cdmsf_min1 = volctrl.channel1;
-	msf.cdmsf_sec1 = volctrl.channel2;
-	msf.cdmsf_frame1 = volctrl.channel3;
-
-	status = exec_long_cmd(COMCHCTRL, &msf);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_long_cmd COMCHCTRL: %02x", -status));
-		return -EIO;
-	}
-	return 0;
-}
-
-
-static int cdromsubchnl(void __user *arg)
-{
-	int status;
-	struct cdrom_subchnl subchnl;
-
-	if (copy_from_user(&subchnl, arg, sizeof subchnl))
-		return -EFAULT;
-
-	if (subchnl.cdsc_format != CDROM_LBA
-	    && subchnl.cdsc_format != CDROM_MSF)
-		return -EINVAL;
-
-	status = get_q_channel(&subchnl);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "get_q_channel: %02x", -status));
-		return -EIO;
-	}
-
-	if (copy_to_user(arg, &subchnl, sizeof subchnl))
-		return -EFAULT;
-	return 0;
-}
-
-
-static struct gendisk *optcd_disk;
-
-
-static int cdromread(void __user *arg, int blocksize, int cmd)
-{
-	int status;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&msf, arg, sizeof msf))
-		return -EFAULT;
-
-	bin2bcd(&msf);
-	msf.cdmsf_min1 = 0;
-	msf.cdmsf_sec1 = 0;
-	msf.cdmsf_frame1 = 1;	/* read only one frame */
-	status = exec_read_cmd(cmd, &msf);
-
-	DEBUG((DEBUG_VFS, "read cmd status 0x%x", status));
-
-	if (!sleep_flag_low(FL_DTEN, SLEEP_TIMEOUT))
-		return -EIO;
-
-	fetch_data(optcd_disk->private_data, blocksize);
-
-	if (copy_to_user(arg, optcd_disk->private_data, blocksize))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int cdromseek(void __user *arg)
-{
-	int status;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&msf, arg, sizeof msf))
-		return -EFAULT;
-
-	bin2bcd(&msf);
-	status = exec_seek_cmd(COMSEEK, &msf);
-
-	DEBUG((DEBUG_VFS, "COMSEEK status 0x%x", status));
-
-	if (status < 0)
-		return -EIO;
-	return 0;
-}
-
-
-#ifdef MULTISESSION
-static int cdrommultisession(void __user *arg)
-{
-	struct cdrom_multisession ms;
-
-	if (copy_from_user(&ms, arg, sizeof ms))
-		return -EFAULT;
-
-	ms.addr.msf.minute = disk_info.last_session.minute;
-	ms.addr.msf.second = disk_info.last_session.second;
-	ms.addr.msf.frame = disk_info.last_session.frame;
-
-	if (ms.addr_format != CDROM_LBA
-	   && ms.addr_format != CDROM_MSF)
-		return -EINVAL;
-	if (ms.addr_format == CDROM_LBA)
-		msf2lba(&ms.addr);
-
-	ms.xa_flag = disk_info.xa;
-
-  	if (copy_to_user(arg, &ms, sizeof(struct cdrom_multisession)))
-		return -EFAULT;
-
-#if DEBUG_MULTIS
- 	if (ms.addr_format == CDROM_MSF)
-               	printk(KERN_DEBUG
-			"optcd: multisession xa:%d, msf:%02d:%02d.%02d\n",
-			ms.xa_flag,
-			ms.addr.msf.minute,
-			ms.addr.msf.second,
-			ms.addr.msf.frame);
-	else
-		printk(KERN_DEBUG
-		    "optcd: multisession %d, lba:0x%08x [%02d:%02d.%02d])\n",
-			ms.xa_flag,
-			ms.addr.lba,
-			disk_info.last_session.minute,
-			disk_info.last_session.second,
-			disk_info.last_session.frame);
-#endif /* DEBUG_MULTIS */
-
-	return 0;
-}
-#endif /* MULTISESSION */
-
-
-static int cdromreset(void)
-{
-	if (state != S_IDLE) {
-		error = 1;
-		tries = 0;
-	}
-
-	toc_uptodate = 0;
-	disk_changed = 1;
-	opt_invalidate_buffers();
-	audio_status = CDROM_AUDIO_NO_STATUS;
-
-	if (!reset_drive())
-		return -EIO;
-	return 0;
-}
-
-/* VFS calls */
-
-
-static int opt_ioctl(struct inode *ip, struct file *fp,
-                     unsigned int cmd, unsigned long arg)
-{
-	int status, err, retval = 0;
-	void __user *argp = (void __user *)arg;
-
-	DEBUG((DEBUG_VFS, "starting opt_ioctl"));
-
-	if (!ip)
-		return -EINVAL;
-
-	if (cmd == CDROMRESET)
-		return cdromreset();
-
-	/* is do_optcd_request or another ioctl busy? */
-	if (state != S_IDLE || in_vfs)
-		return -EBUSY;
-
-	in_vfs = 1;
-
-	status = drive_status();
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "drive_status: %02x", -status));
-		in_vfs = 0;
-		return -EIO;
-	}
-
-	if (status & ST_DOOR_OPEN)
-		switch (cmd) {	/* Actions that can be taken with door open */
-		case CDROMCLOSETRAY:
-			/* We do this before trying to read the toc. */
-			err = exec_cmd(COMCLOSE);
-			if (err < 0) {
-				DEBUG((DEBUG_VFS,
-				       "exec_cmd COMCLOSE: %02x", -err));
-				in_vfs = 0;
-				return -EIO;
-			}
-			break;
-		default:	in_vfs = 0;
-				return -EBUSY;
-		}
-
-	err = update_toc();
-	if (err < 0) {
-		DEBUG((DEBUG_VFS, "update_toc: %02x", -err));
-		in_vfs = 0;
-		return -EIO;
-	}
-
-	DEBUG((DEBUG_VFS, "ioctl cmd 0x%x", cmd));
-
-	switch (cmd) {
-	case CDROMPAUSE:	retval = cdrompause(); break;
-	case CDROMRESUME:	retval = cdromresume(); break;
-	case CDROMPLAYMSF:	retval = cdromplaymsf(argp); break;
-	case CDROMPLAYTRKIND:	retval = cdromplaytrkind(argp); break;
-	case CDROMREADTOCHDR:	retval = cdromreadtochdr(argp); break;
-	case CDROMREADTOCENTRY:	retval = cdromreadtocentry(argp); break;
-
-	case CDROMSTOP:		err = exec_cmd(COMSTOP);
-				if (err < 0) {
-					DEBUG((DEBUG_VFS,
-						"exec_cmd COMSTOP: %02x",
-						-err));
-					retval = -EIO;
-				} else
-					audio_status = CDROM_AUDIO_NO_STATUS;
-				break;
-	case CDROMSTART:	break;	/* This is a no-op */
-	case CDROMEJECT:	err = exec_cmd(COMUNLOCK);
-				if (err < 0) {
-					DEBUG((DEBUG_VFS,
-						"exec_cmd COMUNLOCK: %02x",
-						-err));
-					retval = -EIO;
-					break;
-				}
-				err = exec_cmd(COMOPEN);
-				if (err < 0) {
-					DEBUG((DEBUG_VFS,
-						"exec_cmd COMOPEN: %02x",
-						-err));
-					retval = -EIO;
-				}
-				break;
-
-	case CDROMVOLCTRL:	retval = cdromvolctrl(argp); break;
-	case CDROMSUBCHNL:	retval = cdromsubchnl(argp); break;
-
-	/* The drive detects the mode and automatically delivers the
-	   correct 2048 bytes, so we don't need these IOCTLs */
-	case CDROMREADMODE2:	retval = -EINVAL; break;
-	case CDROMREADMODE1:	retval = -EINVAL; break;
-
-	/* Drive doesn't support reading audio */
-	case CDROMREADAUDIO:	retval = -EINVAL; break;
-
-	case CDROMEJECT_SW:	auto_eject = (char) arg;
-				break;
-
-#ifdef MULTISESSION
-	case CDROMMULTISESSION:	retval = cdrommultisession(argp); break;
-#endif
-
-	case CDROM_GET_MCN:	retval = -EINVAL; break; /* not implemented */
-	case CDROMVOLREAD:	retval = -EINVAL; break; /* not implemented */
-
-	case CDROMREADRAW:
-			/* this drive delivers 2340 bytes in raw mode */
-			retval = cdromread(argp, CD_FRAMESIZE_RAW1, COMREADRAW);
-			break;
-	case CDROMREADCOOKED:
-			retval = cdromread(argp, CD_FRAMESIZE, COMREAD);
-			break;
-	case CDROMREADALL:
-			retval = cdromread(argp, CD_FRAMESIZE_RAWER, COMREADALL);
-			break;
-
-	case CDROMSEEK:		retval = cdromseek(argp); break;
-	case CDROMPLAYBLK:	retval = -EINVAL; break; /* not implemented */
-	case CDROMCLOSETRAY:	break;	/* The action was taken earlier */
-	default:		retval = -EINVAL;
-	}
-	in_vfs = 0;
-	return retval;
-}
-
-
-static int open_count = 0;
-
-/* Open device special file; check that a disk is in. */
-static int opt_open(struct inode *ip, struct file *fp)
-{
-	DEBUG((DEBUG_VFS, "starting opt_open"));
-
-	if (!open_count && state == S_IDLE) {
-		int status;
-		char *buf;
-
-		buf = kmalloc(CD_FRAMESIZE_RAWER, GFP_KERNEL);
-		if (!buf) {
-			printk(KERN_INFO "optcd: cannot allocate read buffer\n");
-			return -ENOMEM;
-		}
-		optcd_disk->private_data = buf;		/* save read buffer */
-
-		toc_uptodate = 0;
-		opt_invalidate_buffers();
-
-		status = exec_cmd(COMCLOSE);	/* close door */
-		if (status < 0) {
-			DEBUG((DEBUG_VFS, "exec_cmd COMCLOSE: %02x", -status));
-		}
-
-		status = drive_status();
-		if (status < 0) {
-			DEBUG((DEBUG_VFS, "drive_status: %02x", -status));
-			goto err_out;
-		}
-		DEBUG((DEBUG_VFS, "status: %02x", status));
-		if ((status & ST_DOOR_OPEN) || (status & ST_DRVERR)) {
-			printk(KERN_INFO "optcd: no disk or door open\n");
-			goto err_out;
-		}
-		status = exec_cmd(COMLOCK);		/* Lock door */
-		if (status < 0) {
-			DEBUG((DEBUG_VFS, "exec_cmd COMLOCK: %02x", -status));
-		}
-		status = update_toc();	/* Read table of contents */
-		if (status < 0)	{
-			DEBUG((DEBUG_VFS, "update_toc: %02x", -status));
-	 		status = exec_cmd(COMUNLOCK);	/* Unlock door */
-			if (status < 0) {
-				DEBUG((DEBUG_VFS,
-				       "exec_cmd COMUNLOCK: %02x", -status));
-			}
-			goto err_out;
-		}
-		open_count++;
-	}
-
-	DEBUG((DEBUG_VFS, "exiting opt_open"));
-
-	return 0;
-
-err_out:
-	return -EIO;
-}
-
-
-/* Release device special file; flush all blocks from the buffer cache */
-static int opt_release(struct inode *ip, struct file *fp)
-{
-	int status;
-
-	DEBUG((DEBUG_VFS, "executing opt_release"));
-	DEBUG((DEBUG_VFS, "inode: %p, device: %s, file: %p\n",
-		ip, ip->i_bdev->bd_disk->disk_name, fp));
-
-	if (!--open_count) {
-		toc_uptodate = 0;
-		opt_invalidate_buffers();
-	 	status = exec_cmd(COMUNLOCK);	/* Unlock door */
-		if (status < 0) {
-			DEBUG((DEBUG_VFS, "exec_cmd COMUNLOCK: %02x", -status));
-		}
-		if (auto_eject) {
-			status = exec_cmd(COMOPEN);
-			DEBUG((DEBUG_VFS, "exec_cmd COMOPEN: %02x", -status));
-		}
-		kfree(optcd_disk->private_data);
-		del_timer(&delay_timer);
-		del_timer(&req_timer);
-	}
-	return 0;
-}
-
-
-/* Check if disk has been changed */
-static int opt_media_change(struct gendisk *disk)
-{
-	DEBUG((DEBUG_VFS, "executing opt_media_change"));
-	DEBUG((DEBUG_VFS, "dev: %s; disk_changed = %d\n",
-			disk->disk_name, disk_changed));
-
-	if (disk_changed) {
-		disk_changed = 0;
-		return 1;
-	}
-	return 0;
-}
-
-/* Driver initialisation */
-
-
-/* Returns 1 if a drive is detected with a version string
-   starting with "DOLPHIN". Otherwise 0. */
-static int __init version_ok(void)
-{
-	char devname[100];
-	int count, i, ch, status;
-
-	status = exec_cmd(COMVERSION);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_cmd COMVERSION: %02x", -status));
-		return 0;
-	}
-	if ((count = get_data(1)) < 0) {
-		DEBUG((DEBUG_VFS, "get_data(1): %02x", -count));
-		return 0;
-	}
-	for (i = 0, ch = -1; count > 0; count--) {
-		if ((ch = get_data(1)) < 0) {
-			DEBUG((DEBUG_VFS, "get_data(1): %02x", -ch));
-			break;
-		}
-		if (i < 99)
-			devname[i++] = ch;
-	}
-	devname[i] = '\0';
-	if (ch < 0)
-		return 0;
-
-	printk(KERN_INFO "optcd: Device %s detected\n", devname);
-	return ((devname[0] == 'D')
-	     && (devname[1] == 'O')
-	     && (devname[2] == 'L')
-	     && (devname[3] == 'P')
-	     && (devname[4] == 'H')
-	     && (devname[5] == 'I')
-	     && (devname[6] == 'N'));
-}
-
-
-static struct block_device_operations opt_fops = {
-	.owner		= THIS_MODULE,
-	.open		= opt_open,
-	.release	= opt_release,
-	.ioctl		= opt_ioctl,
-	.media_changed	= opt_media_change,
-};
-
-#ifndef MODULE
-/* Get kernel parameter when used as a kernel driver */
-static int optcd_setup(char *str)
-{
-	int ints[4];
-	(void)get_options(str, ARRAY_SIZE(ints), ints);
-	
-	if (ints[0] > 0)
-		optcd_port = ints[1];
-
- 	return 1;
-}
-
-__setup("optcd=", optcd_setup);
-
-#endif /* MODULE */
-
-/* Test for presence of drive and initialize it. Called at boot time
-   or during module initialisation. */
-static int __init optcd_init(void)
-{
-	int status;
-
-	if (optcd_port <= 0) {
-		printk(KERN_INFO
-			"optcd: no Optics Storage CDROM Initialization\n");
-		return -EIO;
-	}
-	optcd_disk = alloc_disk(1);
-	if (!optcd_disk) {
-		printk(KERN_ERR "optcd: can't allocate disk\n");
-		return -ENOMEM;
-	}
-	optcd_disk->major = MAJOR_NR;
-	optcd_disk->first_minor = 0;
-	optcd_disk->fops = &opt_fops;
-	sprintf(optcd_disk->disk_name, "optcd");
-
-	if (!request_region(optcd_port, 4, "optcd")) {
-		printk(KERN_ERR "optcd: conflict, I/O port 0x%x already used\n",
-			optcd_port);
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-
-	if (!reset_drive()) {
-		printk(KERN_ERR "optcd: drive at 0x%x not ready\n", optcd_port);
-		release_region(optcd_port, 4);
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-	if (!version_ok()) {
-		printk(KERN_ERR "optcd: unknown drive detected; aborting\n");
-		release_region(optcd_port, 4);
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-	status = exec_cmd(COMINITDOUBLE);
-	if (status < 0) {
-		printk(KERN_ERR "optcd: cannot init double speed mode\n");
-		release_region(optcd_port, 4);
-		DEBUG((DEBUG_VFS, "exec_cmd COMINITDOUBLE: %02x", -status));
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-	if (register_blkdev(MAJOR_NR, "optcd")) {
-		release_region(optcd_port, 4);
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-
-
-	opt_queue = blk_init_queue(do_optcd_request, &optcd_lock);
-	if (!opt_queue) {
-		unregister_blkdev(MAJOR_NR, "optcd");
-		release_region(optcd_port, 4);
-		put_disk(optcd_disk);
-		return -ENOMEM;
-	}
-
-	blk_queue_hardsect_size(opt_queue, 2048);
-	optcd_disk->queue = opt_queue;
-	add_disk(optcd_disk);
-
-	printk(KERN_INFO "optcd: DOLPHIN 8000 AT CDROM at 0x%x\n", optcd_port);
-	return 0;
-}
-
-
-static void __exit optcd_exit(void)
-{
-	del_gendisk(optcd_disk);
-	put_disk(optcd_disk);
-	if (unregister_blkdev(MAJOR_NR, "optcd") == -EINVAL) {
-		printk(KERN_ERR "optcd: what's that: can't unregister\n");
-		return;
-	}
-	blk_cleanup_queue(opt_queue);
-	release_region(optcd_port, 4);
-	printk(KERN_INFO "optcd: module released.\n");
-}
-
-module_init(optcd_init);
-module_exit(optcd_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(OPTICS_CDROM_MAJOR);
diff --git a/drivers/cdrom/optcd.h b/drivers/cdrom/optcd.h
deleted file mode 100644
index 1911bb92ee28..000000000000
--- a/drivers/cdrom/optcd.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*	linux/include/linux/optcd.h - Optics Storage 8000 AT CDROM driver
-	$Id: optcd.h,v 1.2 1996/01/15 18:43:44 root Exp root $
-
-	Copyright (C) 1995 Leo Spiekman (spiekman@dutette.et.tudelft.nl)
-
-
-	Configuration file for linux/drivers/cdrom/optcd.c
-*/
-
-#ifndef _LINUX_OPTCD_H
-#define _LINUX_OPTCD_H
-
-
-/* I/O base of drive. Drive uses base to base+2.
-   This setting can be overridden with the kernel or insmod command
-   line option 'optcd=<portbase>'. Use address of 0 to disable driver. */
-#define OPTCD_PORTBASE	0x340
-
-
-/* enable / disable parts of driver by define / undef */
-#define	MULTISESSION		/* multisession support (ALPHA) */
-
-
-/* Change 0 to 1 to debug various parts of the driver */
-#define	DEBUG_DRIVE_IF	0	/* Low level drive interface */
-#define	DEBUG_CONV	0	/* Address conversions */
-#define	DEBUG_BUFFERS	0	/* Buffering and block size conversion */
-#define	DEBUG_REQUEST	0	/* Request mechanism */
-#define	DEBUG_STATE	0	/* State machine */
-#define	DEBUG_TOC	0	/* Q-channel and Table of Contents */
-#define	DEBUG_MULTIS	0	/* Multisession code */
-#define	DEBUG_VFS	0	/* VFS interface */
-
-
-/* Don't touch these unless you know what you're doing. */
-
-/* Various timeout loop repetition counts. */
-#define BUSY_TIMEOUT		10000000	/* for busy wait */
-#define FAST_TIMEOUT		100000		/* ibid. for probing */
-#define SLEEP_TIMEOUT		6000		/* for timer wait */
-#define MULTI_SEEK_TIMEOUT	1000		/* for timer wait */
-#define READ_TIMEOUT		6000		/* for poll wait */
-#define STOP_TIMEOUT		2000		/* for poll wait */
-#define RESET_WAIT		5000		/* busy wait at drive reset */
-
-/* # of buffers for block size conversion. 6 is optimal for my setup (P75),
-   giving 280 kb/s, with 0.4% CPU usage. Experiment to find your optimal
-   setting */
-#define N_BUFS		6
-
-
-#endif /* _LINUX_OPTCD_H */
diff --git a/drivers/cdrom/sbpcd.c b/drivers/cdrom/sbpcd.c
deleted file mode 100644
index a1283b1ef989..000000000000
--- a/drivers/cdrom/sbpcd.c
+++ /dev/null
@@ -1,5966 +0,0 @@
-/*
- *  sbpcd.c   CD-ROM device driver for the whole family of traditional,
- *            non-ATAPI IDE-style Matsushita/Panasonic CR-5xx drives.
- *            Works with SoundBlaster compatible cards and with "no-sound"
- *            interface cards like Lasermate, Panasonic CI-101P, Teac, ...
- *            Also for the Longshine LCS-7260 drive.
- *            Also for the IBM "External ISA CD-Rom" drive.
- *            Also for the CreativeLabs CD200 drive.
- *            Also for the TEAC CD-55A drive.
- *            Also for the ECS-AT "Vertos 100" drive.
- *            Not for Sanyo drives (but for the H94A, sjcd is there...).
- *            Not for any other Funai drives than the CD200 types (sometimes
- *             labelled E2550UA or MK4015 or 2800F).
- */
-
-#define VERSION "v4.63 Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000"
-
-/*   Copyright (C) 1993, 1994, 1995  Eberhard Moenkeberg <emoenke@gwdg.de>
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2, or (at your option)
- *   any later version.
- *
- *   You should have received a copy of the GNU General Public License
- *   (for example /usr/src/linux/COPYING); if not, write to the Free
- *   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *   If you change this software, you should mail a .diff file with some
- *   description lines to emoenke@gwdg.de. I want to know about it.
- *
- *   If you are the editor of a Linux CD, you should enable sbpcd.c within
- *   your boot floppy kernel and send me one of your CDs for free.
- *
- *   If you would like to port the driver to an other operating system (f.e.
- *   FreeBSD or NetBSD) or use it as an information source, you shall not be
- *   restricted by the GPL under the following conditions:
- *     a) the source code of your work is freely available
- *     b) my part of the work gets mentioned at all places where your 
- *        authorship gets mentioned
- *     c) I receive a copy of your code together with a full installation
- *        package of your operating system for free.
- *
- *
- *  VERSION HISTORY
- *
- *  0.1  initial release, April/May 93, after mcd.c (Martin Harriss)
- *
- *  0.2  thek "repeat:"-loop in do_sbpcd_request did not check for
- *       end-of-request_queue (resulting in kernel panic).
- *       Flow control seems stable, but throughput is not better.  
- *
- *  0.3  interrupt locking totally eliminated (maybe "inb" and "outb"
- *       are still locking) - 0.2 made keyboard-type-ahead losses.
- *       check_sbpcd_media_change added (to use by isofs/inode.c)
- *       - but it detects almost nothing.
- *
- *  0.4  use MAJOR 25 definitely.
- *       Almost total re-design to support double-speed drives and
- *       "naked" (no sound) interface cards ("LaserMate" interface type).
- *       Flow control should be exact now.
- *       Don't occupy the SbPro IRQ line (not needed either); will
- *       live together with Hannu Savolainen's sndkit now.
- *       Speeded up data transfer to 150 kB/sec, with help from Kai
- *       Makisara, the "provider" of the "mt" tape utility.
- *       Give "SpinUp" command if necessary.
- *       First steps to support up to 4 drives (but currently only one).
- *       Implemented audio capabilities - workman should work, xcdplayer
- *       gives some problems.
- *       This version is still consuming too much CPU time, and
- *       sleeping still has to be worked on.
- *       During "long" implied seeks, it seems possible that a 
- *       ReadStatus command gets ignored. That gives the message
- *       "ResponseStatus timed out" (happens about 6 times here during
- *       a "ls -alR" of the YGGDRASIL LGX-Beta CD). Such a case is
- *       handled without data error, but it should get done better.
- *
- *  0.5  Free CPU during waits (again with help from Kai Makisara).
- *       Made it work together with the LILO/kernel setup standard.
- *       Included auto-probing code, as suggested by YGGDRASIL.
- *       Formal redesign to add DDI debugging.
- *       There are still flaws in IOCTL (workman with double speed drive).
- *
- *  1.0  Added support for all drive IDs (0...3, no longer only 0)
- *       and up to 4 drives on one controller.
- *       Added "#define MANY_SESSION" for "old" multi session CDs.
- *
- *  1.1  Do SpinUp for new drives, too.
- *       Revised for clean compile under "old" kernels (0.99pl9).
- *
- *  1.2  Found the "workman with double-speed drive" bug: use the driver's
- *       audio_state, not what the drive is reporting with ReadSubQ.
- *
- *  1.3  Minor cleanups.
- *       Refinements regarding Workman.
- *
- *  1.4  Read XA disks (PhotoCDs) with "old" drives, too (but only the first
- *       session - no chance to fully access a "multi-session" CD).
- *       This currently still is too slow (50 kB/sec) - but possibly
- *       the old drives won't do it faster.
- *       Implemented "door (un)lock" for new drives (still does not work
- *       as wanted - no lock possible after an unlock).
- *       Added some debugging printout for the UPC/EAN code - but my drives 
- *       return only zeroes. Is there no UPC/EAN code written?
- *
- *  1.5  Laborate with UPC/EAN code (not better yet).
- *       Adapt to kernel 1.1.8 change (have to explicitly include
- *       <linux/string.h> now).
- *
- *  1.6  Trying to read audio frames as data. Impossible with the current
- *       drive firmware levels, as it seems. Awaiting any hint. ;-)
- *       Changed "door unlock": repeat it until success.
- *       Changed CDROMSTOP routine (stop somewhat "softer" so that Workman
- *       won't get confused).
- *       Added a third interface type: Sequoia S-1000, as used with the SPEA
- *       Media FX sound card. This interface (usable for Sony and Mitsumi 
- *       drives, too) needs a special configuration setup and behaves like a 
- *       LaserMate type after that. Still experimental - I do not have such
- *       an interface.
- *       Use the "variable BLOCK_SIZE" feature (2048). But it does only work
- *       if you give the mount option "block=2048".
- *       The media_check routine is currently disabled; now that it gets
- *       called as it should I fear it must get synchronized for not to
- *       disturb the normal driver's activity.
- *
- *  2.0  Version number bumped - two reasons:
- *       - reading audio tracks as data works now with CR-562 and CR-563. We
- *       currently do it by an IOCTL (yet has to get standardized), one frame
- *       at a time; that is pretty slow. But it works.
- *       - we are maintaining now up to 4 interfaces (each up to 4 drives):
- *       did it the easy way - a different MAJOR (25, 26, ...) and a different
- *       copy of the driver (sbpcd.c, sbpcd2.c, sbpcd3.c, sbpcd4.c - only
- *       distinguished by the value of SBPCD_ISSUE and the driver's name),
- *       and a common sbpcd.h file.
- *       Bettered the "ReadCapacity error" problem with old CR-52x drives (the
- *       drives sometimes need a manual "eject/insert" before work): just
- *       reset the drive and do again. Needs lots of resets here and sometimes
- *       that does not cure, so this can't be the solution.
- *
- *  2.1  Found bug with multisession CDs (accessing frame 16).
- *       "read audio" works now with address type CDROM_MSF, too.
- *       Bigger audio frame buffer: allows reading max. 4 frames at time; this
- *       gives a significant speedup, but reading more than one frame at once
- *       gives missing chunks at each single frame boundary.
- *
- *  2.2  Kernel interface cleanups: timers, init, setup, media check.
- *
- *  2.3  Let "door lock" and "eject" live together.
- *       Implemented "close tray" (done automatically during open).
- *
- *  2.4  Use different names for device registering.
- *
- *  2.5  Added "#if EJECT" code (default: enabled) to automatically eject
- *       the tray during last call to "sbpcd_release".
- *       Added "#if JUKEBOX" code (default: disabled) to automatically eject
- *       the tray during call to "sbpcd_open" if no disk is in.
- *       Turn on the CD volume of "compatible" sound cards, too; just define
- *       SOUND_BASE (in sbpcd.h) accordingly (default: disabled).
- *
- *  2.6  Nothing new.  
- *
- *  2.7  Added CDROMEJECT_SW ioctl to set the "EJECT" behavior on the fly:
- *       0 disables, 1 enables auto-ejecting. Useful to keep the tray in
- *       during shutdown.
- *
- *  2.8  Added first support (still BETA, I need feedback or a drive) for
- *       the Longshine LCS-7260 drives. They appear as double-speed drives
- *       using the "old" command scheme, extended by tray control and door
- *       lock functions.
- *       Found (and fixed preliminary) a flaw with some multisession CDs: we
- *       have to re-direct not only the accesses to frame 16 (the isofs
- *       routines drive it up to max. 100), but also those to the continuation
- *       (repetition) frames (as far as they exist - currently set fix as
- *       16..20).
- *       Changed default of the "JUKEBOX" define. If you use this default,
- *       your tray will eject if you try to mount without a disk in. Next
- *       mount command will insert the tray - so, just fill in a disk. ;-)
- *
- *  2.9  Fulfilled the Longshine LCS-7260 support; with great help and
- *       experiments by Serge Robyns.
- *       First attempts to support the TEAC CD-55A drives; but still not
- *       usable yet.
- *       Implemented the CDROMMULTISESSION ioctl; this is an attempt to handle
- *       multi session CDs more "transparent" (redirection handling has to be
- *       done within the isofs routines, and only for the special purpose of
- *       obtaining the "right" volume descriptor; accesses to the raw device
- *       should not get redirected).
- *
- *  3.0  Just a "normal" increment, with some provisions to do it better. ;-)
- *       Introduced "#define READ_AUDIO" to specify the maximum number of 
- *       audio frames to grab with one request. This defines a buffer size
- *       within kernel space; a value of 0 will reserve no such space and
- *       disable the CDROMREADAUDIO ioctl. A value of 75 enables the reading
- *       of a whole second with one command, but will use a buffer of more
- *       than 172 kB.
- *       Started CD200 support. Drive detection should work, but nothing
- *       more.
- *
- *  3.1  Working to support the CD200 and the Teac CD-55A drives.
- *       AT-BUS style device numbering no longer used: use SCSI style now.
- *       So, the first "found" device has MINOR 0, regardless of the
- *       jumpered drive ID. This implies modifications to the /dev/sbpcd*
- *       entries for some people, but will help the DAU (german TLA, english:
- *       "newbie", maybe ;-) to install his "first" system from a CD.
- *
- *  3.2  Still testing with CD200 and CD-55A drives.
- *
- *  3.3  Working with CD200 support.
- *
- *  3.4  Auto-probing stops if an address of 0 is seen (to be entered with
- *       the kernel command line).
- *       Made the driver "loadable". If used as a module, "audio copy" is
- *       disabled, and the internal read ahead data buffer has a reduced size
- *       of 4 kB; so, throughput may be reduced a little bit with slow CPUs.
- *
- *  3.5  Provisions to handle weird photoCDs which have an interrupted
- *       "formatting" immediately after the last frames of some files: simply
- *       never "read ahead" with MultiSession CDs. By this, CPU usage may be
- *       increased with those CDs, and there may be a loss in speed.
- *       Re-structured the messaging system.
- *       The "loadable" version no longer has a limited READ_AUDIO buffer
- *       size.
- *       Removed "MANY_SESSION" handling for "old" multi session CDs.
- *       Added "private" IOCTLs CDROMRESET and CDROMVOLREAD.
- *       Started again to support the TEAC CD-55A drives, now that I found
- *       the money for "my own" drive. ;-)
- *       The TEAC CD-55A support is fairly working now.
- *       I have measured that the drive "delivers" at 600 kB/sec (even with
- *       bigger requests than the drive's 64 kB buffer can satisfy), but
- *       the "real" rate does not exceed 520 kB/sec at the moment. 
- *       Caused by the various changes to build in TEAC support, the timed
- *       loops are de-optimized at the moment (less throughput with CR-52x
- *       drives, and the TEAC will give speed only with SBP_BUFFER_FRAMES 64).
- *
- *  3.6  Fixed TEAC data read problems with SbPro interfaces.
- *       Initial size of the READ_AUDIO buffer is 0. Can get set to any size
- *       during runtime.
- *
- *  3.7  Introduced MAX_DRIVES for some poor interface cards (seen with TEAC
- *       drives) which allow only one drive (ID 0); this avoids repetitive
- *       detection under IDs 1..3. 
- *       Elongated cmd_out_T response waiting; necessary for photo CDs with
- *       a lot of sessions.
- *       Bettered the sbpcd_open() behavior with TEAC drives.
- *
- *  3.8  Elongated max_latency for CR-56x drives.
- *
- *  3.9  Finally fixed the long-known SoundScape/SPEA/Sequoia S-1000 interface
- *       configuration bug.
- *       Now Corey, Heiko, Ken, Leo, Vadim/Eric & Werner are invited to copy
- *       the config_spea() routine into their drivers. ;-)
- *
- *  4.0  No "big step" - normal version increment.
- *       Adapted the benefits from 1.3.33.
- *       Fiddled with CDROMREADAUDIO flaws.
- *       Avoid ReadCapacity command with CD200 drives (the MKE 1.01 version
- *       seems not to support it).
- *       Fulfilled "read audio" for CD200 drives, with help of Pete Heist
- *       (heistp@rpi.edu).
- *
- *  4.1  Use loglevel KERN_INFO with printk().
- *       Added support for "Vertos 100" drive ("ECS-AT") - it is very similar
- *       to the Longshine LCS-7260. Give feedback if you can - I never saw
- *       such a drive, and I have no specs.
- *
- *  4.2  Support for Teac 16-bit interface cards. Can't get auto-detected,
- *       so you have to jumper your card to 0x2C0. Still not 100% - come
- *       in contact if you can give qualified feedback.
- *       Use loglevel KERN_NOTICE with printk(). If you get annoyed by a
- *       flood of unwanted messages and the accompanied delay, try to read
- *       my documentation. Especially the Linux CDROM drivers have to do an
- *       important job for the newcomers, so the "distributed" version has
- *       to fit some special needs. Since generations, the flood of messages
- *       is user-configurable (even at runtime), but to get aware of this, one
- *       needs a special mental quality: the ability to read.
- *       
- *  4.3  CD200F does not like to receive a command while the drive is
- *       reading the ToC; still trying to solve it.
- *       Removed some redundant verify_area calls (yes, Heiko Eissfeldt
- *       is visiting all the Linux CDROM drivers ;-).
- *       
- *  4.4  Adapted one idea from tiensivu@pilot.msu.edu's "stripping-down"
- *       experiments: "KLOGD_PAUSE".
- *       Inhibited "play audio" attempts with data CDs. Provisions for a
- *       "data-safe" handling of "mixed" (data plus audio) Cds.
- *
- *  4.5  Meanwhile Gonzalo Tornaria <tornaria@cmat.edu.uy> (GTL) built a
- *       special end_request routine: we seem to have to take care for not
- *       to have two processes working at the request list. My understanding
- *       was and is that ll_rw_blk should not call do_sbpcd_request as long
- *       as there is still one call active (the first call will care for all
- *       outstanding I/Os, and if a second call happens, that is a bug in
- *       ll_rw_blk.c).
- *       "Check media change" without touching any drive.
- *
- *  4.6  Use a semaphore to synchronize multi-activity; elaborated by Rob
- *       Riggs <rriggs@tesser.com>. At the moment, we simply block "read"
- *       against "ioctl" and vice versa. This could be refined further, but
- *       I guess with almost no performance increase.
- *       Experiments to speed up the CD-55A; again with help of Rob Riggs
- *       (to be true, he gave both, idea & code. ;-)
- *
- *  4.61 Ported to Uniform CD-ROM driver by 
- *       Heiko Eissfeldt <heiko@colossus.escape.de> with additional
- *       changes by Erik Andersen <andersee@debian.org>
- *
- *  4.62 Fix a bug where playing audio left the drive in an unusable state.
- *         Heiko Eissfeldt <heiko@colossus.escape.de>
- *
- *  November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	             Removed init_module & cleanup_module in favor of 
- *	             module_init & module_exit.
- *	             Torben Mathiasen <tmm@image.dk>
- *
- *  4.63 Bug fixes for audio annoyances, new legacy CDROM maintainer.
- *		Annoying things fixed:
- *		TOC reread on automated disk changes
- *		TOC reread on manual cd changes
- *		Play IOCTL tries to play CD before it's actually ready... sometimes.
- *		CD_AUDIO_COMPLETED state so workman (and other playes) can repeat play.
- *		Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000
- *
- *  4.64 Fix module parameters - were being completely ignored.
- *	 Can also specify max_drives=N as a setup int to get rid of
- *	 "ghost" drives on crap hardware (aren't they all?)   Paul Gortmaker
- *
- *  TODO
- *     implement "read all subchannel data" (96 bytes per frame)
- *     remove alot of the virtual status bits and deal with hardware status
- *     move the change of cd for audio to a better place
- *     add debug levels to insmod parameters (trivial)
- *
- *     special thanks to Kai Makisara (kai.makisara@vtt.fi) for his fine
- *     elaborated speed-up experiments (and the fabulous results!), for
- *     the "push" towards load-free wait loops, and for the extensive mail
- *     thread which brought additional hints and bug fixes.
- *
- */
-
-/*
- * Trying to merge requests breaks this driver horribly (as in it goes
- * boom and apparently has done so since 2.3.41).  As it is a legacy
- * driver for a horribly slow double speed CD on a hideous interface
- * designed for polled operation, I won't lose any sleep in simply
- * disallowing merging.				Paul G.  02/2001
- *
- * Thu May 30 14:14:47 CEST 2002:
- *
- * I have presumably found the reson for the above - there was a bogous
- * end_request substitute, which was manipulating the request queues
- * incorrectly. If someone has access to the actual hardware, and it's
- * still operations - well  please free to test it.
- *
- * Marcin Dalecki
- */
-
-/*
- * Add bio/kdev_t changes for 2.5.x required to make it work again. 
- * Still room for improvement in the request handling here if anyone
- * actually cares.  Bring your own chainsaw.    Paul G.  02/2002
- */
-
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <stdarg.h>
-#include "sbpcd.h"
-
-#define MAJOR_NR MATSUSHITA_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-/*==========================================================================*/
-#if SBPCD_DIS_IRQ
-# define SBPCD_CLI cli()
-# define SBPCD_STI sti()
-#else
-# define SBPCD_CLI
-# define SBPCD_STI
-#endif
-
-/*==========================================================================*/
-/*
- * auto-probing address list
- * inspired by Adam J. Richter from Yggdrasil
- *
- * still not good enough - can cause a hang.
- *   example: a NE 2000 ethernet card at 300 will cause a hang probing 310.
- * if that happens, reboot and use the LILO (kernel) command line.
- * The possibly conflicting ethernet card addresses get NOT probed 
- * by default - to minimize the hang possibilities. 
- *
- * The SB Pro addresses get "mirrored" at 0x6xx and some more locations - to
- * avoid a type error, the 0x2xx-addresses must get checked before 0x6xx.
- *
- * send mail to emoenke@gwdg.de if your interface card is not FULLY
- * represented here.
- */
-static int sbpcd[] =
-{
-	CDROM_PORT, SBPRO, /* probe with user's setup first */
-#if DISTRIBUTION
-	0x230, 1, /* Soundblaster Pro and 16 (default) */
-#if 0
-	0x300, 0, /* CI-101P (default), WDH-7001C (default),
-		     Galaxy (default), Reveal (one default) */
-	0x250, 1, /* OmniCD default, Soundblaster Pro and 16 */
-	0x2C0, 3, /* Teac 16-bit cards */
-	0x260, 1, /* OmniCD */
-	0x320, 0, /* Lasermate, CI-101P, WDH-7001C, Galaxy, Reveal (other default),
-		     Longshine LCS-6853 (default) */
-	0x338, 0, /* Reveal Sound Wave 32 card model #SC600 */
-	0x340, 0, /* Mozart sound card (default), Lasermate, CI-101P */
-	0x360, 0, /* Lasermate, CI-101P */
-	0x270, 1, /* Soundblaster 16 */
-	0x670, 0, /* "sound card #9" */
-	0x690, 0, /* "sound card #9" */
-	0x338, 2, /* SPEA Media FX, Ensonic SoundScape (default) */
-	0x328, 2, /* SPEA Media FX */
-	0x348, 2, /* SPEA Media FX */
-	0x634, 0, /* some newer sound cards */
-	0x638, 0, /* some newer sound cards */
-	0x230, 1, /* some newer sound cards */
-	/* due to incomplete address decoding of the SbPro card, these must be last */
-	0x630, 0, /* "sound card #9" (default) */
-	0x650, 0, /* "sound card #9" */
-#ifdef MODULE
-	/*
-	 * some "hazardous" locations (no harm with the loadable version)
-	 * (will stop the bus if a NE2000 ethernet card resides at offset -0x10)
-	 */
-	0x330, 0, /* Lasermate, CI-101P, WDH-7001C */
-	0x350, 0, /* Lasermate, CI-101P */
-	0x358, 2, /* SPEA Media FX */
-	0x370, 0, /* Lasermate, CI-101P */
-	0x290, 1, /* Soundblaster 16 */
-	0x310, 0, /* Lasermate, CI-101P, WDH-7001C */
-#endif /* MODULE */
-#endif
-#endif /* DISTRIBUTION */
-};
-
-/*
- * Protects access to global structures etc.
- */
-static  __cacheline_aligned DEFINE_SPINLOCK(sbpcd_lock);
-static struct request_queue *sbpcd_queue;
-
-/* You can only set the first pair, from old MODULE_PARM code.  */
-static int sbpcd_set(const char *val, struct kernel_param *kp)
-{
-	get_options((char *)val, 2, (int *)sbpcd);
-	return 0;
-}
-module_param_call(sbpcd, sbpcd_set, NULL, NULL, 0);
-
-#define NUM_PROBE  (sizeof(sbpcd) / sizeof(int))
-
-/*==========================================================================*/
-
-#define INLINE inline
-
-/*==========================================================================*/
-/*
- * the forward references:
- */
-static void sbp_sleep(u_int);
-static void mark_timeout_delay(u_long);
-static void mark_timeout_data(u_long);
-#if 0
-static void mark_timeout_audio(u_long);
-#endif
-static void sbp_read_cmd(struct request *req);
-static int sbp_data(struct request *req);
-static int cmd_out(void);
-static int DiskInfo(void);
-
-/*==========================================================================*/
-
-/*
- * pattern for printk selection:
- *
- * (1<<DBG_INF)  necessary information
- * (1<<DBG_BSZ)  BLOCK_SIZE trace
- * (1<<DBG_REA)  "read" status trace
- * (1<<DBG_CHK)  "media check" trace
- * (1<<DBG_TIM)  datarate timer test
- * (1<<DBG_INI)  initialization trace
- * (1<<DBG_TOC)  tell TocEntry values
- * (1<<DBG_IOC)  ioctl trace
- * (1<<DBG_STA)  "ResponseStatus" trace
- * (1<<DBG_ERR)  "cc_ReadError" trace
- * (1<<DBG_CMD)  "cmd_out" trace
- * (1<<DBG_WRN)  give explanation before auto-probing
- * (1<<DBG_MUL)  multi session code test
- * (1<<DBG_IDX)  "drive_id != 0" test code
- * (1<<DBG_IOX)  some special information
- * (1<<DBG_DID)  drive ID test
- * (1<<DBG_RES)  drive reset info
- * (1<<DBG_SPI)  SpinUp test info
- * (1<<DBG_IOS)  ioctl trace: "subchannel"
- * (1<<DBG_IO2)  ioctl trace: general
- * (1<<DBG_UPC)  show UPC info
- * (1<<DBG_XA1)  XA mode debugging
- * (1<<DBG_LCK)  door (un)lock info
- * (1<<DBG_SQ1)   dump SubQ frame
- * (1<<DBG_AUD)  "read audio" debugging
- * (1<<DBG_SEQ)  Sequoia interface configuration trace
- * (1<<DBG_LCS)  Longshine LCS-7260 debugging trace
- * (1<<DBG_CD2)  MKE/Funai CD200 debugging trace
- * (1<<DBG_TEA)  TEAC CD-55A debugging trace
- * (1<<DBG_ECS)  ECS-AT (Vertos-100) debugging trace
- * (1<<DBG_000)  unnecessary information
- */
-#if DISTRIBUTION
-static int sbpcd_debug = (1<<DBG_INF);
-#else
-static int sbpcd_debug = 0 & ((1<<DBG_INF) |
-			  (1<<DBG_TOC) |
-			  (1<<DBG_MUL) |
-			  (1<<DBG_UPC));
-#endif /* DISTRIBUTION */
-
-static int sbpcd_ioaddr = CDROM_PORT;	/* default I/O base address */
-static int sbpro_type = SBPRO;
-static unsigned char f_16bit;
-static unsigned char do_16bit;
-static int CDo_command, CDo_reset;
-static int CDo_sel_i_d, CDo_enable;
-static int CDi_info, CDi_status, CDi_data;
-static struct cdrom_msf msf;
-static struct cdrom_ti ti;
-static struct cdrom_tochdr tochdr;
-static struct cdrom_tocentry tocentry;
-static struct cdrom_subchnl SC;
-static struct cdrom_volctrl volctrl;
-static struct cdrom_read_audio read_audio;
-
-static unsigned char msgnum;
-static char msgbuf[80];
-
-static int max_drives = MAX_DRIVES;
-module_param(max_drives, int, 0);
-#ifndef MODULE
-static unsigned char setup_done;
-static const char *str_sb_l = "soundblaster";
-static const char *str_sp_l = "spea";
-static const char *str_ss_l = "soundscape";
-static const char *str_t16_l = "teac16bit";
-static const char *str_ss = "SoundScape";
-#endif
-static const char *str_sb = "SoundBlaster";
-static const char *str_lm = "LaserMate";
-static const char *str_sp = "SPEA";
-static const char *str_t16 = "Teac16bit";
-static const char *type;
-static const char *major_name="sbpcd";
-
-/*==========================================================================*/
-
-#ifdef FUTURE
-static DECLARE_WAIT_QUEUE_HEAD(sbp_waitq);
-#endif /* FUTURE */
-
-static int teac=SBP_TEAC_SPEED;
-static int buffers=SBP_BUFFER_FRAMES;
-
-static u_char family0[]="MATSHITA"; /* MKE CR-521, CR-522, CR-523 */
-static u_char family1[]="CR-56";    /* MKE CR-562, CR-563 */
-static u_char family2[]="CD200";    /* MKE CD200, Funai CD200F */
-static u_char familyL[]="LCS-7260"; /* Longshine LCS-7260 */
-static u_char familyT[]="CD-55";    /* TEAC CD-55A */
-static u_char familyV[]="ECS-AT";   /* ECS Vertos 100 */
-
-static u_int recursion; /* internal testing only */
-static u_int fatal_err; /* internal testing only */
-static u_int response_count;
-static u_int flags_cmd_out;
-static u_char cmd_type;
-static u_char drvcmd[10];
-static u_char infobuf[20];
-static u_char xa_head_buf[CD_XA_HEAD];
-static u_char xa_tail_buf[CD_XA_TAIL];
-
-#if OLD_BUSY
-static volatile u_char busy_data;
-static volatile u_char busy_audio; /* true semaphores would be safer */
-#endif /* OLD_BUSY */ 
-static DECLARE_MUTEX(ioctl_read_sem);
-static u_long timeout;
-static volatile u_char timed_out_delay;
-static volatile u_char timed_out_data;
-#if 0
-static volatile u_char timed_out_audio;
-#endif
-static u_int datarate= 1000000;
-static u_int maxtim16=16000000;
-static u_int maxtim04= 4000000;
-static u_int maxtim02= 2000000;
-static u_int maxtim_8=   30000;
-#if LONG_TIMING
-static u_int maxtim_data= 9000;
-#else
-static u_int maxtim_data= 3000;
-#endif /* LONG_TIMING */ 
-#if DISTRIBUTION
-static int n_retries=6;
-#else
-static int n_retries=6;
-#endif
-/*==========================================================================*/
-
-static int ndrives;
-static u_char drv_pattern[NR_SBPCD]={speed_auto,speed_auto,speed_auto,speed_auto};
-
-/*==========================================================================*/
-/*
- * drive space begins here (needed separate for each unit) 
- */
-static struct sbpcd_drive {
-	char drv_id;           /* "jumpered" drive ID or -1 */
-	char drv_sel;          /* drive select lines bits */
-	
-	char drive_model[9];
-	u_char firmware_version[4];
-	char f_eject;          /* auto-eject flag: 0 or 1 */
-	u_char *sbp_buf;       /* Pointer to internal data buffer,
-				  space allocated during sbpcd_init() */
-	u_int sbp_bufsiz;      /* size of sbp_buf (# of frames) */
-	int sbp_first_frame;   /* First frame in buffer */
-	int sbp_last_frame;    /* Last frame in buffer  */
-	int sbp_read_frames;   /* Number of frames being read to buffer */
-	int sbp_current;       /* Frame being currently read */
-	
-	u_char mode;           /* read_mode: READ_M1, READ_M2, READ_SC, READ_AU */
-	u_char *aud_buf;       /* Pointer to audio data buffer,
-				  space allocated during sbpcd_init() */
-	u_int sbp_audsiz;      /* size of aud_buf (# of raw frames) */
-	u_int drv_type;
-	u_char drv_options;
-	int status_bits;
-	u_char diskstate_flags;
-	u_char sense_byte;
-	
-	u_char CD_changed;
-	char open_count;
-	u_char error_byte;
-	
-	u_char f_multisession;
-	u_int lba_multi;
-	int first_session;
-	int last_session;
-	int track_of_last_session;
-	
-	u_char audio_state;
-	u_int pos_audio_start;
-	u_int pos_audio_end;
-	char vol_chan0;
-	u_char vol_ctrl0;
-	char vol_chan1;
-	u_char vol_ctrl1;
-#if 000 /* no supported drive has it */
-	char vol_chan2;
-	u_char vol_ctrl2;
-	char vol_chan3;
-	u_char vol_ctrl3;
-#endif /*000 */
-	u_char volume_control; /* TEAC on/off bits */
-	
-	u_char SubQ_ctl_adr;
-	u_char SubQ_trk;
-	u_char SubQ_pnt_idx;
-	u_int SubQ_run_tot;
-	u_int SubQ_run_trk;
-	u_char SubQ_whatisthis;
-	
-	u_char UPC_ctl_adr;
-	u_char UPC_buf[7];
-	
-	int frame_size;
-	int CDsize_frm;
-	
-	u_char xa_byte; /* 0x20: XA capabilities */
-	u_char n_first_track; /* binary */
-	u_char n_last_track; /* binary (not bcd), 0x01...0x63 */
-	u_int size_msf; /* time of whole CD, position of LeadOut track */
-	u_int size_blk;
-	
-	u_char TocEnt_nixbyte; /* em */
-	u_char TocEnt_ctl_adr;
-	u_char TocEnt_number;
-	u_char TocEnt_format; /* em */
-	u_int TocEnt_address;
-#ifdef SAFE_MIXED
-	char has_data;
-#endif /* SAFE_MIXED */ 
-	u_char ored_ctl_adr; /* to detect if CDROM contains data tracks */
-	
-	struct {
-		u_char nixbyte; /* em */
-		u_char ctl_adr; /* 0x4x: data, 0x0x: audio */
-		u_char number;
-		u_char format; /* em */ /* 0x00: lba, 0x01: msf */
-		u_int address;
-	} TocBuffer[MAX_TRACKS+1]; /* last entry faked */ 
-	
-	int in_SpinUp; /* CR-52x test flag */
-	int n_bytes; /* TEAC awaited response count */
-	u_char error_state, b3, b4; /* TEAC command error state */
-	u_char f_drv_error; /* TEAC command error flag */
-	u_char speed_byte;
-	int frmsiz;
-	u_char f_XA; /* 1: XA */
-	u_char type_byte; /* 0, 1, 3 */
-	u_char mode_xb_6;
-	u_char mode_yb_7;
-	u_char mode_xb_8;
-	u_char delay;
-	struct cdrom_device_info *sbpcd_infop;
-	struct gendisk *disk;
-} D_S[NR_SBPCD];
-
-static struct sbpcd_drive *current_drive = D_S;
-
-/*
- * drive space ends here (needed separate for each unit)
- */
-/*==========================================================================*/
-#if 0
-unsigned long cli_sti; /* for saving the processor flags */
-#endif
-/*==========================================================================*/
-static DEFINE_TIMER(delay_timer, mark_timeout_delay, 0, 0);
-static DEFINE_TIMER(data_timer, mark_timeout_data, 0, 0);
-#if 0
-static DEFINE_TIMER(audio_timer, mark_timeout_audio, 0, 0);
-#endif
-/*==========================================================================*/
-/*
- * DDI interface
- */
-static void msg(int level, const char *fmt, ...)
-{
-#if DISTRIBUTION
-#define MSG_LEVEL KERN_NOTICE
-#else
-#define MSG_LEVEL KERN_INFO
-#endif /* DISTRIBUTION */
-
-	char buf[256];
-	va_list args;
-	
-	if (!(sbpcd_debug&(1<<level))) return;
-	
-	msgnum++;
-	if (msgnum>99) msgnum=0;
-	va_start(args, fmt);
-	vsnprintf(buf, sizeof(buf), fmt, args);
-	va_end(args);
-	printk(MSG_LEVEL "%s-%d [%02d]:  %s", major_name, current_drive - D_S, msgnum, buf);
-#if KLOGD_PAUSE
-	sbp_sleep(KLOGD_PAUSE); /* else messages get lost */
-#endif /* KLOGD_PAUSE */ 
-	return;
-}
-/*==========================================================================*/
-/*
- * DDI interface: runtime trace bit pattern maintenance
- */
-static int sbpcd_dbg_ioctl(unsigned long arg, int level)
-{
-	switch(arg)
-	{
-	case 0:	/* OFF */
-		sbpcd_debug = DBG_INF;
-		break;
-		
-	default:
-		if (arg>=128) sbpcd_debug &= ~(1<<(arg-128));
-		else sbpcd_debug |= (1<<arg);
-	}
-	return (arg);
-}
-/*==========================================================================*/
-static void mark_timeout_delay(u_long i)
-{
-	timed_out_delay=1;
-#if 0
-	msg(DBG_TIM,"delay timer expired.\n");
-#endif
-}
-/*==========================================================================*/
-static void mark_timeout_data(u_long i)
-{
-	timed_out_data=1;
-#if 0
-	msg(DBG_TIM,"data timer expired.\n");
-#endif
-}
-/*==========================================================================*/
-#if 0
-static void mark_timeout_audio(u_long i)
-{
-	timed_out_audio=1;
-#if 0
-	msg(DBG_TIM,"audio timer expired.\n");
-#endif
-}
-#endif
-/*==========================================================================*/
-/*
- * Wait a little while (used for polling the drive).
- */
-static void sbp_sleep(u_int time)
-{
-	sti();
-	schedule_timeout_interruptible(time);
-	sti();
-}
-/*==========================================================================*/
-#define RETURN_UP(rc) {up(&ioctl_read_sem); return(rc);}
-/*==========================================================================*/
-/*
- *  convert logical_block_address to m-s-f_number (3 bytes only)
- */
-static INLINE void lba2msf(int lba, u_char *msf)
-{
-	lba += CD_MSF_OFFSET;
-	msf[0] = lba / (CD_SECS*CD_FRAMES);
-	lba %= CD_SECS*CD_FRAMES;
-	msf[1] = lba / CD_FRAMES;
-	msf[2] = lba % CD_FRAMES;
-}
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- *  convert msf-bin to msf-bcd
- */
-static INLINE void bin2bcdx(u_char *p)  /* must work only up to 75 or 99 */
-{
-	*p=((*p/10)<<4)|(*p%10);
-}
-/*==========================================================================*/
-static INLINE u_int blk2msf(u_int blk)
-{
-	MSF msf;
-	u_int mm;
-	
-	msf.c[3] = 0;
-	msf.c[2] = (blk + CD_MSF_OFFSET) / (CD_SECS * CD_FRAMES);
-	mm = (blk + CD_MSF_OFFSET) % (CD_SECS * CD_FRAMES);
-	msf.c[1] = mm / CD_FRAMES;
-	msf.c[0] = mm % CD_FRAMES;
-	return (msf.n);
-}
-/*==========================================================================*/
-static INLINE u_int make16(u_char rh, u_char rl)
-{
-	return ((rh<<8)|rl);
-}
-/*==========================================================================*/
-static INLINE u_int make32(u_int rh, u_int rl)
-{
-	return ((rh<<16)|rl);
-}
-/*==========================================================================*/
-static INLINE u_char swap_nibbles(u_char i)
-{
-	return ((i<<4)|(i>>4));
-}
-/*==========================================================================*/
-static INLINE u_char byt2bcd(u_char i)
-{
-	return (((i/10)<<4)+i%10);
-}
-/*==========================================================================*/
-static INLINE u_char bcd2bin(u_char bcd)
-{
-	return ((bcd>>4)*10+(bcd&0x0F));
-}
-/*==========================================================================*/
-static INLINE int msf2blk(int msfx)
-{
-	MSF msf;
-	int i;
-	
-	msf.n=msfx;
-	i=(msf.c[2] * CD_SECS + msf.c[1]) * CD_FRAMES + msf.c[0] - CD_MSF_OFFSET;
-	if (i<0) return (0);
-	return (i);
-}
-/*==========================================================================*/
-/*
- *  convert m-s-f_number (3 bytes only) to logical_block_address 
- */
-static INLINE int msf2lba(u_char *msf)
-{
-	int i;
-	
-	i=(msf[0] * CD_SECS + msf[1]) * CD_FRAMES + msf[2] - CD_MSF_OFFSET;
-	if (i<0) return (0);
-	return (i);
-}
-/*==========================================================================*/
-/* evaluate cc_ReadError code */ 
-static int sta2err(int sta)
-{
-	if (famT_drive)
-	{
-		if (sta==0x00) return (0);
-		if (sta==0x01) return (-604); /* CRC error */
-		if (sta==0x02) return (-602); /* drive not ready */
-		if (sta==0x03) return (-607); /* unknown media */
-		if (sta==0x04) return (-612); /* general failure */
-		if (sta==0x05) return (0);
-		if (sta==0x06) return (-ERR_DISKCHANGE); /* disk change */
-		if (sta==0x0b) return (-612); /* general failure */
-		if (sta==0xff) return (-612); /* general failure */
-		return (0);
-	}
-	else
-	{
-		if (sta<=2) return (sta);
-		if (sta==0x05) return (-604); /* CRC error */
-		if (sta==0x06) return (-606); /* seek error */
-		if (sta==0x0d) return (-606); /* seek error */
-		if (sta==0x0e) return (-603); /* unknown command */
-		if (sta==0x14) return (-603); /* unknown command */
-		if (sta==0x0c) return (-611); /* read fault */
-		if (sta==0x0f) return (-611); /* read fault */
-		if (sta==0x10) return (-611); /* read fault */
-		if (sta>=0x16) return (-612); /* general failure */
-		if (sta==0x11) return (-ERR_DISKCHANGE); /* disk change (LCS: removed) */
-		if (famL_drive)
-			if (sta==0x12) return (-ERR_DISKCHANGE); /* disk change (inserted) */
-		return (-602); /* drive not ready */
-	}
-}
-/*==========================================================================*/
-static INLINE void clr_cmdbuf(void)
-{
-	int i;
-	
-	for (i=0;i<10;i++) drvcmd[i]=0;
-	cmd_type=0;
-}
-/*==========================================================================*/
-static void flush_status(void)
-{
-	int i;
-	
-	sbp_sleep(15*HZ/10);
-	for (i=maxtim_data;i!=0;i--) inb(CDi_status);
-}
-/*====================================================================*/
-/*
- * CDi status loop for Teac CD-55A (Rob Riggs)
- *
- * This is needed because for some strange reason
- * the CD-55A can take a real long time to give a
- * status response. This seems to happen after we
- * issue a READ command where a long seek is involved.
- *
- * I tried to ensure that we get max throughput with
- * minimal busy waiting. We busy wait at first, then
- * "switch gears" and start sleeping. We sleep for
- * longer periods of time the longer we wait.
- *
- */
-static int CDi_stat_loop_T(void)
-{
-	int	i, gear=1;
-	u_long  timeout_1, timeout_2, timeout_3, timeout_4;
-
-	timeout_1 = jiffies + HZ / 50;  /* sbp_sleep(0) for a short period */
-	timeout_2 = jiffies + HZ / 5;	/* nap for no more than 200ms */
-	timeout_3 = jiffies + 5 * HZ;	/* sleep for up to 5s */
-	timeout_4 = jiffies + 45 * HZ;	/* long sleep for up to 45s. */
-	do
-          {
-            i = inb(CDi_status);
-            if (!(i&s_not_data_ready)) return (i);
-            if (!(i&s_not_result_ready)) return (i);
-            switch(gear)
-              {
-              case 4:
-                sbp_sleep(HZ);
-                if (time_after(jiffies, timeout_4)) gear++;
-                msg(DBG_TEA, "CDi_stat_loop_T: long sleep active.\n");
-                break;
-              case 3:
-                sbp_sleep(HZ/10);
-                if (time_after(jiffies, timeout_3)) gear++;
-                break;
-              case 2:
-                sbp_sleep(HZ/100);
-                if (time_after(jiffies, timeout_2)) gear++;
-                break;
-              case 1:
-                sbp_sleep(0);
-                if (time_after(jiffies, timeout_1)) gear++;
-              }
-          } while (gear < 5);
-	return -1;
-}
-/*==========================================================================*/
-static int CDi_stat_loop(void)
-{
-	int i,j;
-	
-	for(timeout = jiffies + 10*HZ, i=maxtim_data; time_before(jiffies, timeout); )
-	{
-		for ( ;i!=0;i--)
-		{
-			j=inb(CDi_status);
-			if (!(j&s_not_data_ready)) return (j);
-			if (!(j&s_not_result_ready)) return (j);
-			if (fam0L_drive) if (j&s_attention) return (j);
-		}
-		sbp_sleep(1);
-		i = 1;
-	}
-	msg(DBG_LCS,"CDi_stat_loop failed in line %d\n", __LINE__);
-	return (-1);
-}
-/*==========================================================================*/
-#if 00000
-/*==========================================================================*/
-static int tst_DataReady(void)
-{
-	int i;
-	
-	i=inb(CDi_status);
-	if (i&s_not_data_ready) return (0);
-	return (1);
-}
-/*==========================================================================*/
-static int tst_ResultReady(void)
-{
-	int i;
-	
-	i=inb(CDi_status);
-	if (i&s_not_result_ready) return (0);
-	return (1);
-}
-/*==========================================================================*/
-static int tst_Attention(void)
-{
-	int i;
-	
-	i=inb(CDi_status);
-	if (i&s_attention) return (1);
-	return (0);
-}
-/*==========================================================================*/
-#endif
-/*==========================================================================*/
-static int ResponseInfo(void)
-{
-	int i,j,st=0;
-	u_long timeout;
-	
-	for (i=0,timeout=jiffies+HZ;i<response_count;i++) 
-	{
-		for (j=maxtim_data; ; )
-		{
-			for ( ;j!=0;j-- )
-			{
-				st=inb(CDi_status);
-				if (!(st&s_not_result_ready)) break;
-			}
-			if ((j!=0)||time_after_eq(jiffies, timeout)) break;
-			sbp_sleep(1);
-			j = 1;
-		}
-		if (time_after_eq(jiffies, timeout)) break;
-		infobuf[i]=inb(CDi_info);
-	}
-#if 000
-	while (!(inb(CDi_status)&s_not_result_ready))
-	{
-		infobuf[i++]=inb(CDi_info);
-	}
-	j=i-response_count;
-	if (j>0) msg(DBG_INF,"ResponseInfo: got %d trailing bytes.\n",j);
-#endif /* 000 */
-	for (j=0;j<i;j++)
-		sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
-	msgbuf[j*3]=0;
-	msg(DBG_CMD,"ResponseInfo:%s (%d,%d)\n",msgbuf,response_count,i);
-	j=response_count-i;
-	if (j>0) return (-j);
-	else return (i);
-}
-/*==========================================================================*/
-static void EvaluateStatus(int st)
-{
-	current_drive->status_bits=0;
-	if (fam1_drive) current_drive->status_bits=st|p_success;
-	else if (fam0_drive)
-	{
-		if (st&p_caddin_old) current_drive->status_bits |= p_door_closed|p_caddy_in;
-		if (st&p_spinning) current_drive->status_bits |= p_spinning;
-		if (st&p_check) current_drive->status_bits |= p_check;
- 		if (st&p_success_old) current_drive->status_bits |= p_success;
- 		if (st&p_busy_old) current_drive->status_bits |= p_busy_new;
-		if (st&p_disk_ok) current_drive->status_bits |= p_disk_ok;
-	}
-	else if (famLV_drive)
-	{
- 		current_drive->status_bits |= p_success;
-		if (st&p_caddin_old) current_drive->status_bits |= p_disk_ok|p_caddy_in;
-		if (st&p_spinning) current_drive->status_bits |= p_spinning;
-		if (st&p_check) current_drive->status_bits |= p_check;
-		if (st&p_busy_old) current_drive->status_bits |= p_busy_new;
-		if (st&p_lcs_door_closed) current_drive->status_bits |= p_door_closed;
-		if (st&p_lcs_door_locked) current_drive->status_bits |= p_door_locked;
-	}
-	else if (fam2_drive)
-	{
- 		current_drive->status_bits |= p_success;
-		if (st&p2_check) current_drive->status_bits |= p1_check;
-		if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed;
-		if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in;
-		if (st&p2_busy1) current_drive->status_bits |= p1_busy;
-		if (st&p2_busy2) current_drive->status_bits |= p1_busy;
-		if (st&p2_spinning) current_drive->status_bits |= p1_spinning;
-		if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked;
-		if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok;
-	}
-	else if (famT_drive)
-	{
-		return; /* still needs to get coded */
- 		current_drive->status_bits |= p_success;
-		if (st&p2_check) current_drive->status_bits |= p1_check;
-		if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed;
-		if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in;
-		if (st&p2_busy1) current_drive->status_bits |= p1_busy;
-		if (st&p2_busy2) current_drive->status_bits |= p1_busy;
-		if (st&p2_spinning) current_drive->status_bits |= p1_spinning;
-		if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked;
-		if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok;
-	}
-	return;
-}
-/*==========================================================================*/
-static int cmd_out_T(void);
-
-static int get_state_T(void)
-{
-	int i;
-
-	clr_cmdbuf();
-	current_drive->n_bytes=1;
-	drvcmd[0]=CMDT_STATUS;
-	i=cmd_out_T();
-	if (i>=0) i=infobuf[0];
-	else
-	{
-		msg(DBG_TEA,"get_state_T error %d\n", i);
-		return (i);
-	}
-	if (i>=0)
-		/* 2: closed, disk in */
-		current_drive->status_bits=p1_door_closed|p1_disk_in|p1_spinning|p1_disk_ok;
-	else if (current_drive->error_state==6)
-	{
-		/* 3: closed, disk in, changed ("06 xx xx") */
-		current_drive->status_bits=p1_door_closed|p1_disk_in;
-		current_drive->CD_changed=0xFF;
-		current_drive->diskstate_flags &= ~toc_bit;
-	}
-	else if ((current_drive->error_state!=2)||(current_drive->b3!=0x3A)||(current_drive->b4==0x00))
-	{
-		/* 1: closed, no disk ("xx yy zz"or "02 3A 00") */
-		current_drive->status_bits=p1_door_closed;
-		current_drive->open_count=0;
-	}
-	else if (current_drive->b4==0x01)
-	{
-		/* 0: open ("02 3A 01") */
-		current_drive->status_bits=0;
-		current_drive->open_count=0;
-	}
-	else
-	{
-		/* 1: closed, no disk ("02 3A xx") */
-		current_drive->status_bits=p1_door_closed;
-		current_drive->open_count=0;
-	}
-	return (current_drive->status_bits);
-}
-/*==========================================================================*/
-static int ResponseStatus(void)
-{
-	int i,j;
-	u_long timeout;
-	
-	msg(DBG_STA,"doing ResponseStatus...\n");
-	if (famT_drive) return (get_state_T());
-	if (flags_cmd_out & f_respo3) timeout = jiffies;
-	else if (flags_cmd_out & f_respo2) timeout = jiffies + 16*HZ;
-	else timeout = jiffies + 4*HZ;
-	j=maxtim_8;
-	do
-	{
-		for ( ;j!=0;j--)
-		{ 
-			i=inb(CDi_status);
-			if (!(i&s_not_result_ready)) break;
-		}
-		if ((j!=0)||time_after(jiffies, timeout)) break;
-		sbp_sleep(1);
-		j = 1;
-	}
-	while (1);
-	if (j==0) 
-	{
-		if ((flags_cmd_out & f_respo3) == 0)
-			msg(DBG_STA,"ResponseStatus: timeout.\n");
-		current_drive->status_bits=0;
-		return (-401);
-	}
-	i=inb(CDi_info);
-	msg(DBG_STA,"ResponseStatus: response %02X.\n", i);
-	EvaluateStatus(i);
-	msg(DBG_STA,"status_bits=%02X, i=%02X\n",current_drive->status_bits,i);
-	return (current_drive->status_bits);
-}
-/*==========================================================================*/
-static void cc_ReadStatus(void)
-{
-	int i;
-	
-	msg(DBG_STA,"giving cc_ReadStatus command\n");
-	if (famT_drive) return;
-	SBPCD_CLI;
-	if (fam0LV_drive) OUT(CDo_command,CMD0_STATUS);
-	else if (fam1_drive) OUT(CDo_command,CMD1_STATUS);
-	else if (fam2_drive) OUT(CDo_command,CMD2_STATUS);
-	if (!fam0LV_drive) for (i=0;i<6;i++) OUT(CDo_command,0);
-	SBPCD_STI;
-}
-/*==========================================================================*/
-static int cc_ReadError(void)
-{
-	int i;
-
-	clr_cmdbuf();
-	msg(DBG_ERR,"giving cc_ReadError command.\n");
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READ_ERR;
-		response_count=8;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_READ_ERR;
-		response_count=6;
-		if (famLV_drive)
-			flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_READ_ERR;
-		response_count=6;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		response_count=5;
-		drvcmd[0]=CMDT_READ_ERR;
-	}
-	i=cmd_out();
-	current_drive->error_byte=0;
-	msg(DBG_ERR,"cc_ReadError: cmd_out(CMDx_READ_ERR) returns %d (%02X)\n",i,i);
-	if (i<0) return (i);
-	if (fam0V_drive) i=1;
-	else i=2;
-	current_drive->error_byte=infobuf[i];
-	msg(DBG_ERR,"cc_ReadError: infobuf[%d] is %d (%02X)\n",i,current_drive->error_byte,current_drive->error_byte);
-	i=sta2err(infobuf[i]);
-        if (i==-ERR_DISKCHANGE)
-        {
-                current_drive->CD_changed=0xFF;
-                current_drive->diskstate_flags &= ~toc_bit;
-        }
-	return (i);
-}
-/*==========================================================================*/
-static int cc_DriveReset(void);
-
-static int cmd_out_T(void)
-{
-#undef CMDT_TRIES
-#define CMDT_TRIES 1000
-#define TEST_FALSE_FF 1
-
-	int i, j, l=0, m, ntries;
-	unsigned long flags;
-
-	current_drive->error_state=0;
-	current_drive->b3=0;
-	current_drive->b4=0;
-	current_drive->f_drv_error=0;
-	for (i=0;i<10;i++) sprintf(&msgbuf[i*3]," %02X",drvcmd[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_CMD,"cmd_out_T:%s\n",msgbuf);
-
-	OUT(CDo_sel_i_d,0);
-	OUT(CDo_enable,current_drive->drv_sel);
-	i=inb(CDi_status);
-	do_16bit=0;
-	if ((f_16bit)&&(!(i&0x80)))
-	{
-		do_16bit=1;
-		msg(DBG_TEA,"cmd_out_T: do_16bit set.\n");
-	}
-	if (!(i&s_not_result_ready))
-	do
-	{
-		j=inb(CDi_info);
-		i=inb(CDi_status);
-		sbp_sleep(0);
-		msg(DBG_TEA,"cmd_out_T: spurious !s_not_result_ready. (%02X)\n", j);
-	}
-	while (!(i&s_not_result_ready));
-	save_flags(flags); cli();
-	for (i=0;i<10;i++) OUT(CDo_command,drvcmd[i]);
-	restore_flags(flags);
-	for (ntries=CMDT_TRIES;ntries>0;ntries--)
-	{
-		if (drvcmd[0]==CMDT_READ_VER) sbp_sleep(HZ); /* fixme */
-#if 01
-		OUT(CDo_sel_i_d,1);
-#endif /* 01 */
-		if (teac==2)
-                  {
-                    if ((i=CDi_stat_loop_T()) == -1) break;
-                  }
-		else
-                  {
-#if 0
-                    OUT(CDo_sel_i_d,1);
-#endif /* 0 */ 
-                    i=inb(CDi_status);
-                  }
-		if (!(i&s_not_data_ready)) /* f.e. CMDT_DISKINFO */
-		{
-			OUT(CDo_sel_i_d,1);
-			if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
-			if (drvcmd[0]==CMDT_DISKINFO)
-			{
-				l=0;
-				do
-                                {
-                                        if (do_16bit)
-                                        {
-                                                i=inw(CDi_data);
-                                                infobuf[l++]=i&0x0ff;
-                                                infobuf[l++]=i>>8;
-#if TEST_FALSE_FF
-                                                if ((l==2)&&(infobuf[0]==0x0ff))
-                                                {
-                                                        infobuf[0]=infobuf[1];
-                                                        l=1;
-                                                        msg(DBG_TEA,"cmd_out_T: do_16bit: false first byte!\n");
-                                                }
-#endif /* TEST_FALSE_FF */ 
-                                        }
-                                        else infobuf[l++]=inb(CDi_data);
-                                        i=inb(CDi_status);
-                                }
-				while (!(i&s_not_data_ready));
-				for (j=0;j<l;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
-				msgbuf[j*3]=0;
-				msg(DBG_CMD,"cmd_out_T data response:%s\n", msgbuf);
-			}
-			else
-			{
-				msg(DBG_TEA,"cmd_out_T: data response with cmd_%02X!\n",
-                                    drvcmd[0]);
-				j=0;
-				do
-				{
-                                        if (do_16bit) i=inw(CDi_data);
-                                        else i=inb(CDi_data);
-                                        j++;
-                                        i=inb(CDi_status);
-				}
-				while (!(i&s_not_data_ready));
-				msg(DBG_TEA,"cmd_out_T: data response: discarded %d bytes/words.\n", j);
-				fatal_err++;
-			}
-		}
-		i=inb(CDi_status);
-		if (!(i&s_not_result_ready))
-		{
-			OUT(CDo_sel_i_d,0);
-			if (drvcmd[0]==CMDT_DISKINFO) m=l;
-			else m=0;
-			do
-			{
-				infobuf[m++]=inb(CDi_info);
-				i=inb(CDi_status);
-			}
-			while (!(i&s_not_result_ready));
-			for (j=0;j<m;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
-			msgbuf[j*3]=0;
-			msg(DBG_CMD,"cmd_out_T info response:%s\n", msgbuf);
-			if (drvcmd[0]==CMDT_DISKINFO)
-                        {
-                                infobuf[0]=infobuf[l];
-                                if (infobuf[0]!=0x02) return (l); /* data length */
-                        }
-			else if (infobuf[0]!=0x02) return (m); /* info length */
-			do
-			{
-				++recursion;
-				if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (%02X): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n", drvcmd[0], recursion);
-				clr_cmdbuf();
-				drvcmd[0]=CMDT_READ_ERR;
-				j=cmd_out_T(); /* !!! recursive here !!! */
-				--recursion;
-				sbp_sleep(1);
-			}
-			while (j<0);
-			current_drive->error_state=infobuf[2];
-			current_drive->b3=infobuf[3];
-			current_drive->b4=infobuf[4];
-			if (current_drive->f_drv_error)
-			{
-				current_drive->f_drv_error=0;
-				cc_DriveReset();
-				current_drive->error_state=2;
-			}
-			return (-current_drive->error_state-400);
-		}
-		if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
-		if ((teac==0)||(ntries<(CMDT_TRIES-5))) sbp_sleep(HZ/10);
-		else sbp_sleep(HZ/100);
-		if (ntries>(CMDT_TRIES-50)) continue;
-		msg(DBG_TEA,"cmd_out_T: next CMDT_TRIES (%02X): %d.\n", drvcmd[0], ntries-1);
-	}
-	current_drive->f_drv_error=1;
-	cc_DriveReset();
-	current_drive->error_state=2;
-	return (-99);
-}
-/*==========================================================================*/
-static int cmd_out(void)
-{
-	int i=0;
-	
-	if (famT_drive) return(cmd_out_T());
-	
-	if (flags_cmd_out&f_putcmd)
-	{ 
-		unsigned long flags;
-		for (i=0;i<7;i++)
-			sprintf(&msgbuf[i*3], " %02X", drvcmd[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_CMD,"cmd_out:%s\n", msgbuf);
-		save_flags(flags); cli();
-		for (i=0;i<7;i++) OUT(CDo_command,drvcmd[i]);
-		restore_flags(flags);
-	}
-	if (response_count!=0)
-	{
-		if (cmd_type!=0)
-		{
-			if (sbpro_type==1) OUT(CDo_sel_i_d,1);
-			msg(DBG_INF,"misleaded to try ResponseData.\n");
-			if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-			return (-22);
-		}
-		else i=ResponseInfo();
-		if (i<0) return (i);
-	}
-	if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to CDi_stat_loop.\n");
-	if (flags_cmd_out&f_lopsta)
-	{
-		i=CDi_stat_loop();
-		if ((i<0)||!(i&s_attention)) return (-8);
-	}
-	if (!(flags_cmd_out&f_getsta)) goto LOC_229;
-	
- LOC_228:
-	if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadStatus.\n");
-	cc_ReadStatus();
-	
- LOC_229:
-	if (flags_cmd_out&f_ResponseStatus) 
-	{
-		if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to ResponseStatus.\n");
-		i=ResponseStatus();
-		/* builds status_bits, returns orig. status or p_busy_new */
-		if (i<0) return (i);
-		if (flags_cmd_out&(f_bit1|f_wait_if_busy))
-		{
-			if (!st_check)
-			{
-				if ((flags_cmd_out&f_bit1)&&(i&p_success)) goto LOC_232;
-				if ((!(flags_cmd_out&f_wait_if_busy))||(!st_busy)) goto LOC_228;
-			}
-		}
-	}
- LOC_232:
-	if (!(flags_cmd_out&f_obey_p_check)) return (0);
-	if (!st_check) return (0);
-	if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadError.\n");
-	i=cc_ReadError();
-	if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cmd_out OK.\n");
-	msg(DBG_000,"cmd_out: cc_ReadError=%d\n", i);
-	return (i);
-}
-/*==========================================================================*/
-static int cc_Seek(u_int pos, char f_blk_msf)
-{
-	int i;
-	
-  clr_cmdbuf();
-	if (f_blk_msf>1) return (-3);
-	if (fam0V_drive)
-	{
-		drvcmd[0]=CMD0_SEEK;
-		if (f_blk_msf==1) pos=msf2blk(pos);
-		drvcmd[2]=(pos>>16)&0x00FF;
-		drvcmd[3]=(pos>>8)&0x00FF;
-		drvcmd[4]=pos&0x00FF;
-		if (fam0_drive)
-		  flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
-			f_ResponseStatus | f_obey_p_check | f_bit1;
-		else
-		  flags_cmd_out = f_putcmd;
-	}
-	else if (fam1L_drive)
-	{
-		drvcmd[0]=CMD1_SEEK; /* same as CMD1_ and CMDL_ */
-		if (f_blk_msf==0) pos=blk2msf(pos);
-		drvcmd[1]=(pos>>16)&0x00FF;
-		drvcmd[2]=(pos>>8)&0x00FF;
-		drvcmd[3]=pos&0x00FF;
-		if (famL_drive)
-			flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-		else
-			flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_SEEK;
-		if (f_blk_msf==0) pos=blk2msf(pos);
-		drvcmd[2]=(pos>>24)&0x00FF;
-		drvcmd[3]=(pos>>16)&0x00FF;
-		drvcmd[4]=(pos>>8)&0x00FF;
-		drvcmd[5]=pos&0x00FF;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_SEEK;
-		if (f_blk_msf==1) pos=msf2blk(pos);
-		drvcmd[2]=(pos>>24)&0x00FF;
-		drvcmd[3]=(pos>>16)&0x00FF;
-		drvcmd[4]=(pos>>8)&0x00FF;
-		drvcmd[5]=pos&0x00FF;
-		current_drive->n_bytes=1;
-	}
-	response_count=0;
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_SpinUp(void)
-{
-	int i;
-	
-	msg(DBG_SPI,"SpinUp.\n");
-	current_drive->in_SpinUp = 1;
-	clr_cmdbuf();
-	if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_SPINUP;
-		if (fam0L_drive)
-		  flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
-		    f_ResponseStatus|f_obey_p_check|f_bit1;
-		else
-		  flags_cmd_out=f_putcmd;
-	}
-	else if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SPINUP;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_TRAY_CTL;
-		drvcmd[4]=0x01; /* "spinup" */
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_TRAY_CTL;
-		drvcmd[4]=0x03; /* "insert", it hopefully spins the drive up */
-	}
-	response_count=0;
-	i=cmd_out();
-	current_drive->in_SpinUp = 0;
-	return (i);
-}
-/*==========================================================================*/
-static int cc_SpinDown(void)
-{
-	int i;
-	
-	if (fam0_drive) return (0);
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SPINDOWN;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_TRAY_CTL;
-		drvcmd[4]=0x02; /* "eject" */
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famL_drive)
-	{
-		drvcmd[0]=CMDL_SPINDOWN;
-		drvcmd[1]=1;
-		flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (famV_drive)
-	{
-		drvcmd[0]=CMDV_SPINDOWN;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_TRAY_CTL;
-		drvcmd[4]=0x02; /* "eject" */
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_get_mode_T(void)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=10;
-	drvcmd[0]=CMDT_GETMODE;
-	drvcmd[4]=response_count;
-	i=cmd_out_T();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_set_mode_T(void)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=1;
-	drvcmd[0]=CMDT_SETMODE;
-	drvcmd[1]=current_drive->speed_byte;
-	drvcmd[2]=current_drive->frmsiz>>8;
-	drvcmd[3]=current_drive->frmsiz&0x0FF;
-	drvcmd[4]=current_drive->f_XA; /* 1: XA */
-	drvcmd[5]=current_drive->type_byte; /* 0, 1, 3 */
-	drvcmd[6]=current_drive->mode_xb_6;
-	drvcmd[7]=current_drive->mode_yb_7|current_drive->volume_control;
-	drvcmd[8]=current_drive->mode_xb_8;
-	drvcmd[9]=current_drive->delay;
-	i=cmd_out_T();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_prep_mode_T(void)
-{
-	int i, j;
-	
-	i=cc_get_mode_T();
-	if (i<0) return (i);
-	for (i=0;i<10;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
-	current_drive->speed_byte=0x02; /* 0x02: auto quad, 0x82: quad, 0x81: double, 0x80: single */
-	current_drive->frmsiz=make16(infobuf[2],infobuf[3]);
-	current_drive->f_XA=infobuf[4];
-	if (current_drive->f_XA==0) current_drive->type_byte=0;
-	else current_drive->type_byte=1;
-	current_drive->mode_xb_6=infobuf[6];
-	current_drive->mode_yb_7=1;
-	current_drive->mode_xb_8=infobuf[8];
-	current_drive->delay=0; /* 0, 1, 2, 3 */
-	j=cc_set_mode_T();
-	i=cc_get_mode_T();
-	for (i=0;i<10;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
-	return (j);
-}
-/*==========================================================================*/
-static int cc_SetSpeed(u_char speed, u_char x1, u_char x2)
-{
-	int i;
-	
-	if (fam0LV_drive) return (0);
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SETMODE;
-		drvcmd[1]=0x03;
-		drvcmd[2]=speed;
-		drvcmd[3]=x1;
-		drvcmd[4]=x2;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_SETSPEED;
-		if (speed&speed_auto)
-		{
-			drvcmd[2]=0xFF;
-			drvcmd[3]=0xFF;
-		}
-		else
-		{
-			drvcmd[2]=0;
-			drvcmd[3]=150;
-		}
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		return (0);
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_SetVolume(void)
-{
-	int i;
-	u_char channel0,channel1,volume0,volume1;
-	u_char control0,value0,control1,value1;
-	
-	current_drive->diskstate_flags &= ~volume_bit;
-	clr_cmdbuf();
-	channel0=current_drive->vol_chan0;
-	volume0=current_drive->vol_ctrl0;
-	channel1=control1=current_drive->vol_chan1;
-	volume1=value1=current_drive->vol_ctrl1;
-	control0=value0=0;
-	
-	if (famV_drive) return (0);
-
-	if (((current_drive->drv_options&audio_mono)!=0)&&(current_drive->drv_type>=drv_211))
-	{
-		if ((volume0!=0)&&(volume1==0))
-		{
-			volume1=volume0;
-			channel1=channel0;
-		}
-		else if ((volume0==0)&&(volume1!=0))
-		{
-			volume0=volume1;
-			channel0=channel1;
-		}
-	}
-	if (channel0>1)
-	{
-		channel0=0;
-		volume0=0;
-	}
-	if (channel1>1)
-	{
-		channel1=1;
-		volume1=0;
-	}
-	
-	if (fam1_drive)
-	{
-		control0=channel0+1;
-		control1=channel1+1;
-		value0=(volume0>volume1)?volume0:volume1;
-		value1=value0;
-		if (volume0==0) control0=0;
-		if (volume1==0) control1=0;
-		drvcmd[0]=CMD1_SETMODE;
-		drvcmd[1]=0x05;
-		drvcmd[3]=control0;
-		drvcmd[4]=value0;
-		drvcmd[5]=control1;
-		drvcmd[6]=value1;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		control0=channel0+1;
-		control1=channel1+1;
-		value0=(volume0>volume1)?volume0:volume1;
-		value1=value0;
-		if (volume0==0) control0=0;
-		if (volume1==0) control1=0;
-		drvcmd[0]=CMD2_SETMODE;
-		drvcmd[1]=0x0E;
-		drvcmd[3]=control0;
-		drvcmd[4]=value0;
-		drvcmd[5]=control1;
-		drvcmd[6]=value1;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famL_drive)
-	{
-		if ((volume0==0)||(channel0!=0)) control0 |= 0x80;
-		if ((volume1==0)||(channel1!=1)) control0 |= 0x40;
-		if (volume0|volume1) value0=0x80;
-		drvcmd[0]=CMDL_SETMODE;
-		drvcmd[1]=0x03;
-		drvcmd[4]=control0;
-		drvcmd[5]=value0;
-		flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (fam0_drive) /* different firmware levels */
-	{
-		if (current_drive->drv_type>=drv_300)
-		{
-			control0=volume0&0xFC;
-			value0=volume1&0xFC;
-			if ((volume0!=0)&&(volume0<4)) control0 |= 0x04;
-			if ((volume1!=0)&&(volume1<4)) value0 |= 0x04;
-			if (channel0!=0) control0 |= 0x01;
-			if (channel1==1) value0 |= 0x01;
-		}
-		else
-		{
-			value0=(volume0>volume1)?volume0:volume1;
-			if (current_drive->drv_type<drv_211)
-			{
-				if (channel0!=0)
-				{
-					i=channel1;
-					channel1=channel0;
-					channel0=i;
-					i=volume1;
-					volume1=volume0;
-					volume0=i;
-				}
-				if (channel0==channel1)
-				{
-					if (channel0==0)
-					{
-						channel1=1;
-						volume1=0;
-						volume0=value0;
-					}
-					else
-					{
-						channel0=0;
-						volume0=0;
-						volume1=value0;
-					}
-				}
-			}
-			
-			if ((volume0!=0)&&(volume1!=0))
-			{
-				if (volume0==0xFF) volume1=0xFF;
-				else if (volume1==0xFF) volume0=0xFF;
-			}
-			else if (current_drive->drv_type<drv_201) volume0=volume1=value0;
-			
-			if (current_drive->drv_type>=drv_201)
-			{
-				if (volume0==0) control0 |= 0x80;
-				if (volume1==0) control0 |= 0x40;
-			}
-			if (current_drive->drv_type>=drv_211)
-			{
-				if (channel0!=0) control0 |= 0x20;
-				if (channel1!=1) control0 |= 0x10;
-			}
-		}
-		drvcmd[0]=CMD0_SETMODE;
-		drvcmd[1]=0x83;
-		drvcmd[4]=control0;
-		drvcmd[5]=value0;
-		flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		current_drive->volume_control=0;
-		if (!volume0) current_drive->volume_control|=0x10;
-		if (!volume1) current_drive->volume_control|=0x20;
-		i=cc_prep_mode_T();
-		if (i<0) return (i);
-	}
-	if (!famT_drive)
-	{
-		response_count=0;
-		i=cmd_out();
-		if (i<0) return (i);
-	}
-	current_drive->diskstate_flags |= volume_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int GetStatus(void)
-{
-	int i;
-	
-	if (famT_drive) return (0);
-	flags_cmd_out=f_getsta|f_ResponseStatus|f_obey_p_check;
-	response_count=0;
-	cmd_type=0;
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_DriveReset(void)
-{
-	int i;
-	
-	msg(DBG_RES,"cc_DriveReset called.\n");
-	clr_cmdbuf();
-	response_count=0;
-	if (fam0LV_drive) OUT(CDo_reset,0x00);
-	else if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_RESET;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_RESET;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		OUT(CDo_reset,0x00);
-	}
-	else if (famT_drive)
-	{
-		OUT(CDo_sel_i_d,0);
-		OUT(CDo_enable,current_drive->drv_sel);
-		OUT(CDo_command,CMDT_RESET);
-		for (i=1;i<10;i++) OUT(CDo_command,0);
-	}
-	if (fam0LV_drive) sbp_sleep(5*HZ); /* wait 5 seconds */
-	else sbp_sleep(1*HZ); /* wait a second */
-#if 1
-	if (famT_drive)
-	{
-		msg(DBG_TEA, "================CMDT_RESET given=================.\n");
-		sbp_sleep(3*HZ);
-	}
-#endif /* 1 */ 
-	flush_status();
-	i=GetStatus();
-	if (i<0) return i;
-	if (!famT_drive)
-		if (current_drive->error_byte!=aud_12) return -501;
-	return (0);
-}
-
-/*==========================================================================*/
-static int SetSpeed(void)
-{
-	int i, speed;
-	
-	if (!(current_drive->drv_options&(speed_auto|speed_300|speed_150))) return (0);
-	speed=speed_auto;
-	if (!(current_drive->drv_options&speed_auto))
-	{
-		speed |= speed_300;
-		if (!(current_drive->drv_options&speed_300)) speed=0;
-	}
-	i=cc_SetSpeed(speed,0,0);
-	return (i);
-}
-
-static void switch_drive(struct sbpcd_drive *);
-
-static int sbpcd_select_speed(struct cdrom_device_info *cdi, int speed)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	if (p != current_drive)
-		switch_drive(p);
-
-	return cc_SetSpeed(speed == 2 ? speed_300 : speed_150, 0, 0);
-}
-
-/*==========================================================================*/
-static int DriveReset(void)
-{
-	int i;
-	
-	i=cc_DriveReset();
-	if (i<0) return (-22);
-	do
-	{
-		i=GetStatus();
-		if ((i<0)&&(i!=-ERR_DISKCHANGE)) {
-			return (-2); /* from sta2err */
-		}
-		if (!st_caddy_in) break;
-		sbp_sleep(1);
-	}
-	while (!st_diskok);
-#if 000
-	current_drive->CD_changed=1;
-#endif
-	if ((st_door_closed) && (st_caddy_in))
-	{
-		i=DiskInfo();
-		if (i<0) return (-23);
-	}
-	return (0);
-}
-
-static int sbpcd_reset(struct cdrom_device_info *cdi)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	if (p != current_drive)
-		switch_drive(p);
-	return DriveReset();
-}
-
-/*==========================================================================*/
-static int cc_PlayAudio(int pos_audio_start,int pos_audio_end)
-{
-	int i, j, n;
-	
-	if (current_drive->audio_state==audio_playing) return (-EINVAL);
-	clr_cmdbuf();
-	response_count=0;
-	if (famLV_drive)
-	{
-		drvcmd[0]=CMDL_PLAY;
-		i=msf2blk(pos_audio_start);
-		n=msf2blk(pos_audio_end)+1-i;
-		drvcmd[1]=(i>>16)&0x00FF;
-		drvcmd[2]=(i>>8)&0x00FF;
-		drvcmd[3]=i&0x00FF;
-		drvcmd[4]=(n>>16)&0x00FF;
-		drvcmd[5]=(n>>8)&0x00FF;
-		drvcmd[6]=n&0x00FF;
-		if (famL_drive)
-		flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
-			f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
-		else
-		  flags_cmd_out = f_putcmd;
-	}
-	else
-	{
-		j=1;
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_PLAY_MSF;
-			flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus |
-				f_obey_p_check | f_wait_if_busy;
-		}
-		else if (fam2_drive)
-		{
-			drvcmd[0]=CMD2_PLAY_MSF;
-			flags_cmd_out = f_putcmd | f_ResponseStatus | f_obey_p_check;
-		}
-		else if (famT_drive)
-		{
-			drvcmd[0]=CMDT_PLAY_MSF;
-			j=3;
-			response_count=1;
-		}
-		else if (fam0_drive)
-		{
-			drvcmd[0]=CMD0_PLAY_MSF;
-			flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
-				f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
-		}
-		drvcmd[j]=(pos_audio_start>>16)&0x00FF;
-		drvcmd[j+1]=(pos_audio_start>>8)&0x00FF;
-		drvcmd[j+2]=pos_audio_start&0x00FF;
-		drvcmd[j+3]=(pos_audio_end>>16)&0x00FF;
-		drvcmd[j+4]=(pos_audio_end>>8)&0x00FF;
-		drvcmd[j+5]=pos_audio_end&0x00FF;
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_Pause_Resume(int pau_res)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_PAU_RES;
-		if (pau_res!=1) drvcmd[1]=0x80;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_PAU_RES;
-		if (pau_res!=1) drvcmd[2]=0x01;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_PAU_RES;
-		if (pau_res!=1) drvcmd[1]=0x80;
-		if (famL_drive)
-			flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
-				f_obey_p_check|f_bit1;
-		else if (famV_drive)
-		  flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
-				f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		if (pau_res==3)	return (cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end));
-		else if (pau_res==1) drvcmd[0]=CMDT_PAUSE;
-		else return (-56);
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_LockDoor(char lock)
-{
-	int i;
-	
-	if (fam0_drive) return (0);
-	msg(DBG_LCK,"cc_LockDoor: %d (drive %d)\n", lock, current_drive - D_S);
-	msg(DBG_LCS,"p_door_locked bit %d before\n", st_door_locked);
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_LOCK_CTL;
-		if (lock==1) drvcmd[1]=0x01;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_LOCK_CTL;
-		if (lock==1) drvcmd[4]=0x01;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famLV_drive)
-	{
-		drvcmd[0]=CMDL_LOCK_CTL;
-		if (lock==1) drvcmd[1]=0x01;
-		if (famL_drive)
-		  flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-		else
-		  flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_LOCK_CTL;
-		if (lock==1) drvcmd[4]=0x01;
-	}
-	i=cmd_out();
-	msg(DBG_LCS,"p_door_locked bit %d after\n", st_door_locked);
-	return (i);
-}
-/*==========================================================================*/
-/*==========================================================================*/
-static int UnLockDoor(void)
-{
-	int i,j;
-	
-	j=20;
-	do
-	{
-		i=cc_LockDoor(0);
-		--j;
-		sbp_sleep(1);
-	}
-	while ((i<0)&&(j));
-	if (i<0)
-	{
-		cc_DriveReset();
-		return -84;
-	}
-	return (0);
-}
-/*==========================================================================*/
-static int LockDoor(void)
-{
-	int i,j;
-	
-	j=20;
-	do
-	{
-		i=cc_LockDoor(1);
-		--j;
-		sbp_sleep(1);
-	}
-	while ((i<0)&&(j));
-	if (j==0)
-	{		
-		cc_DriveReset();
-		j=20;
-		do
-		{
-			i=cc_LockDoor(1);
-			--j;
-			sbp_sleep(1);
-		}
-		while ((i<0)&&(j));
-	}
-	return (i);
-}
-
-static int sbpcd_lock_door(struct cdrom_device_info *cdi, int lock)
-{
-  return lock ? LockDoor() : UnLockDoor();
-}
-
-/*==========================================================================*/
-static int cc_CloseTray(void)
-{
-	int i;
-	
-	if (fam0_drive) return (0);
-	msg(DBG_LCK,"cc_CloseTray (drive %d)\n", current_drive - D_S);
-	msg(DBG_LCS,"p_door_closed bit %d before\n", st_door_closed);
-	
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_TRAY_CTL;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_TRAY_CTL;
-		drvcmd[1]=0x01;
-		drvcmd[4]=0x03; /* "insert" */
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famLV_drive)
-	{
-		drvcmd[0]=CMDL_TRAY_CTL;
-		if (famLV_drive)
-		  flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
-			f_ResponseStatus|f_obey_p_check|f_bit1;
-		else
-		  flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_TRAY_CTL;
-		drvcmd[4]=0x03; /* "insert" */
-	}
-	i=cmd_out();
-	msg(DBG_LCS,"p_door_closed bit %d after\n", st_door_closed);
-
-	i=cc_ReadError();
-	flags_cmd_out |= f_respo2;
-	cc_ReadStatus(); /* command: give 1-byte status */
-	i=ResponseStatus();
-	if (famT_drive&&(i<0))
-	{
-		cc_DriveReset();
-		i=ResponseStatus();
-#if 0
-                sbp_sleep(HZ);
-#endif /* 0 */ 
-		i=ResponseStatus();
-	}
-	if (i<0)
-	{
-		msg(DBG_INF,"sbpcd cc_CloseTray: ResponseStatus timed out (%d).\n",i);
-	}
-	if (!(famT_drive))
-	{
-		if (!st_spinning)
-		{
-			cc_SpinUp();
-			if (st_check) i=cc_ReadError();
-			flags_cmd_out |= f_respo2;
-			cc_ReadStatus();
-			i=ResponseStatus();
-		} else {
-		}
-	}
-	i=DiskInfo();
-	return (i);
-}
-
-static int sbpcd_tray_move(struct cdrom_device_info *cdi, int position)
-{
-	int retval=0;
-	switch_drive(cdi->handle);
-	/* DUH! --AJK */
-	if(current_drive->CD_changed != 0xFF) {
-		current_drive->CD_changed=0xFF;
-		current_drive->diskstate_flags &= ~cd_size_bit;
-	}
-	if (position == 1) {
-		cc_SpinDown();
-	} else {
-		retval=cc_CloseTray();
-	}
-  return retval;
-}
-
-/*==========================================================================*/
-static int cc_ReadSubQ(void)
-{
-	int i,j;
-
-	current_drive->diskstate_flags &= ~subq_bit;
-	for (j=255;j>0;j--)
-	{
-		clr_cmdbuf();
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_READSUBQ;
-			flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-			response_count=11;
-		}
-		else if (fam2_drive)
-		{
-			drvcmd[0]=CMD2_READSUBQ;
-			drvcmd[1]=0x02;
-			drvcmd[3]=0x01;
-			flags_cmd_out=f_putcmd;
-			response_count=10;
-		}
-		else if (fam0LV_drive)
-		{
-			drvcmd[0]=CMD0_READSUBQ;
-			drvcmd[1]=0x02;
-			if (famLV_drive)
-				flags_cmd_out=f_putcmd;
-			else
-				flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-			response_count=13;
-		}
-		else if (famT_drive)
-		{
-			response_count=12;
-			drvcmd[0]=CMDT_READSUBQ;
-			drvcmd[1]=0x02;
-			drvcmd[2]=0x40;
-			drvcmd[3]=0x01;
-			drvcmd[8]=response_count;
-		}
-		i=cmd_out();
-		if (i<0) return (i);
-		for (i=0;i<response_count;i++)
-		{
-			sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-			msgbuf[i*3]=0;
-			msg(DBG_SQ1,"cc_ReadSubQ:%s\n", msgbuf);
-		}
-		if (famT_drive) break;
-		if (infobuf[0]!=0) break;
-		if ((!st_spinning) || (j==1))
-		{
-			current_drive->SubQ_ctl_adr=current_drive->SubQ_trk=current_drive->SubQ_pnt_idx=current_drive->SubQ_whatisthis=0;
-			current_drive->SubQ_run_tot=current_drive->SubQ_run_trk=0;
-			return (0);
-		}
-	}
-	if (famT_drive) current_drive->SubQ_ctl_adr=infobuf[1];
-	else current_drive->SubQ_ctl_adr=swap_nibbles(infobuf[1]);
-	current_drive->SubQ_trk=byt2bcd(infobuf[2]);
-	current_drive->SubQ_pnt_idx=byt2bcd(infobuf[3]);
-	if (fam0LV_drive) i=5;
-	else if (fam12_drive) i=4;
-	else if (famT_drive) i=8;
-	current_drive->SubQ_run_tot=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
-	i=7;
-	if (fam0LV_drive) i=9;
-	else if (fam12_drive) i=7;
-	else if (famT_drive) i=4;
-	current_drive->SubQ_run_trk=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
-	current_drive->SubQ_whatisthis=infobuf[i+3];
-	current_drive->diskstate_flags |= subq_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ModeSense(void)
-{
-	int i;
-	
-	if (fam2_drive) return (0);
-	if (famV_drive) return (0);
-	current_drive->diskstate_flags &= ~frame_size_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		response_count=5;
-		drvcmd[0]=CMD1_GETMODE;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0L_drive)
-	{
-		response_count=2;
-		drvcmd[0]=CMD0_GETMODE;
-		if (famL_drive) flags_cmd_out=f_putcmd;
-		else flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		response_count=10;
-		drvcmd[0]=CMDT_GETMODE;
-		drvcmd[4]=response_count;
-	}
-	i=cmd_out();
-	if (i<0) return (i);
-	i=0;
-	current_drive->sense_byte=0;
-	if (fam1_drive) current_drive->sense_byte=infobuf[i++];
-	else if (famT_drive)
-	{
-		if (infobuf[4]==0x01) current_drive->xa_byte=0x20;
-		else current_drive->xa_byte=0;
-		i=2;
-	}
-	current_drive->frame_size=make16(infobuf[i],infobuf[i+1]);
-	for (i=0;i<response_count;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_XA1,"cc_ModeSense:%s\n", msgbuf);
-	
-	current_drive->diskstate_flags |= frame_size_bit;
-	return (0);
-}
-/*==========================================================================*/
-/*==========================================================================*/
-static int cc_ModeSelect(int framesize)
-{
-	int i;
-	
-	if (fam2_drive) return (0);
-	if (famV_drive) return (0);
-	current_drive->diskstate_flags &= ~frame_size_bit;
-	clr_cmdbuf();
-	current_drive->frame_size=framesize;
-	if (framesize==CD_FRAMESIZE_RAW) current_drive->sense_byte=0x82;
-	else current_drive->sense_byte=0x00;
-	
-	msg(DBG_XA1,"cc_ModeSelect: %02X %04X\n",
-	    current_drive->sense_byte, current_drive->frame_size);
-	
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SETMODE;
-		drvcmd[1]=0x00;
-		drvcmd[2]=current_drive->sense_byte;
-		drvcmd[3]=(current_drive->frame_size>>8)&0xFF;
-		drvcmd[4]=current_drive->frame_size&0xFF;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_SETMODE;
-		drvcmd[1]=0x00;
-		drvcmd[2]=(current_drive->frame_size>>8)&0xFF;
-		drvcmd[3]=current_drive->frame_size&0xFF;
-		drvcmd[4]=0x00;
-		if(famL_drive)
-			flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		return (-1);
-	}
-	response_count=0;
-	i=cmd_out();
-	if (i<0) return (i);
-	current_drive->diskstate_flags |= frame_size_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_GetVolume(void)
-{
-	int i;
-	u_char switches;
-	u_char chan0=0;
-	u_char vol0=0;
-	u_char chan1=1;
-	u_char vol1=0;
-	
-	if (famV_drive) return (0);
-	current_drive->diskstate_flags &= ~volume_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_GETMODE;
-		drvcmd[1]=0x05;
-		response_count=5;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_GETMODE;
-		drvcmd[1]=0x0E;
-		response_count=5;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_GETMODE;
-		drvcmd[1]=0x03;
-		response_count=2;
-		if(famL_drive)
-			flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		i=cc_get_mode_T();
-		if (i<0) return (i);
-	}
-	if (!famT_drive)
-	{
-		i=cmd_out();
-		if (i<0) return (i);
-	}
-	if (fam1_drive)
-	{
-		chan0=infobuf[1]&0x0F;
-		vol0=infobuf[2];
-		chan1=infobuf[3]&0x0F;
-		vol1=infobuf[4];
-		if (chan0==0)
-		{
-			chan0=1;
-			vol0=0;
-		}
-		if (chan1==0)
-		{
-			chan1=2;
-			vol1=0;
-		}
-		chan0 >>= 1;
-		chan1 >>= 1;
-	}
-	else if (fam2_drive)
-	{
-		chan0=infobuf[1];
-		vol0=infobuf[2];
-		chan1=infobuf[3];
-		vol1=infobuf[4];
-	}
-	else if (famL_drive)
-	{
-		chan0=0;
-		chan1=1;
-		vol0=vol1=infobuf[1];
-		switches=infobuf[0];
-		if ((switches&0x80)!=0) chan0=1;
-		if ((switches&0x40)!=0) chan1=0;
-	}
-	else if (fam0_drive) /* different firmware levels */
-	{
-		chan0=0;
-		chan1=1;
-		vol0=vol1=infobuf[1];
-		if (current_drive->drv_type>=drv_201)
-		{
-			if (current_drive->drv_type<drv_300)
-			{
-				switches=infobuf[0];
-				if ((switches&0x80)!=0) vol0=0;
-				if ((switches&0x40)!=0) vol1=0;
-				if (current_drive->drv_type>=drv_211)
-				{
-					if ((switches&0x20)!=0) chan0=1;
-					if ((switches&0x10)!=0) chan1=0;
-				}
-			}
-			else
-			{
-				vol0=infobuf[0];
-				if ((vol0&0x01)!=0) chan0=1;
-				if ((vol1&0x01)==0) chan1=0;
-				vol0 &= 0xFC;
-				vol1 &= 0xFC;
-				if (vol0!=0) vol0 += 3;
-				if (vol1!=0) vol1 += 3;
-			}
-		}
-	}
-	else if (famT_drive)
-	{
-		current_drive->volume_control=infobuf[7];
-		chan0=0;
-		chan1=1;
-		if (current_drive->volume_control&0x10) vol0=0;
-		else vol0=0xff;
-		if (current_drive->volume_control&0x20) vol1=0;
-		else vol1=0xff;
-	}
-	current_drive->vol_chan0=chan0;
-	current_drive->vol_ctrl0=vol0;
-	current_drive->vol_chan1=chan1;
-	current_drive->vol_ctrl1=vol1;
-#if 000
-	current_drive->vol_chan2=2;
-	current_drive->vol_ctrl2=0xFF;
-	current_drive->vol_chan3=3;
-	current_drive->vol_ctrl3=0xFF;
-#endif /*  000 */
-	current_drive->diskstate_flags |= volume_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadCapacity(void)
-{
-	int i, j;
-	
-	if (fam2_drive) return (0); /* some firmware lacks this command */
-	if (famLV_drive) return (0); /* some firmware lacks this command */
-	if (famT_drive) return (0); /* done with cc_ReadTocDescr() */
-	current_drive->diskstate_flags &= ~cd_size_bit;
-	for (j=3;j>0;j--)
-	{
-		clr_cmdbuf();
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_CAPACITY;
-			response_count=5;
-			flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-		}
-#if 00
-		else if (fam2_drive)
-		{
-			drvcmd[0]=CMD2_CAPACITY;
-			response_count=8;
-			flags_cmd_out=f_putcmd;
-		}
-#endif
-		else if (fam0_drive)
-		{
-			drvcmd[0]=CMD0_CAPACITY;
-			response_count=5;
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-		}
-		i=cmd_out();
-		if (i>=0) break;
-		msg(DBG_000,"cc_ReadCapacity: cmd_out: err %d\n", i);
-		cc_ReadError();
-	}
-	if (j==0) return (i);
-	if (fam1_drive) current_drive->CDsize_frm=msf2blk(make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2])))+CD_MSF_OFFSET;
-	else if (fam0_drive) current_drive->CDsize_frm=make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2]));
-#if 00
-	else if (fam2_drive) current_drive->CDsize_frm=make32(make16(infobuf[0],infobuf[1]),make16(infobuf[2],infobuf[3]));
-#endif
-	current_drive->diskstate_flags |= cd_size_bit;
-	msg(DBG_000,"cc_ReadCapacity: %d frames.\n", current_drive->CDsize_frm);
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadTocDescr(void)
-{
-	int i;
-	
-	current_drive->diskstate_flags &= ~toc_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_DISKINFO;
-		response_count=6;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_DISKINFO;
-		response_count=6;
-		if(famLV_drive)
-			flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		/* possibly longer timeout periods necessary */
-		current_drive->f_multisession=0;
-		drvcmd[0]=CMD2_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[2]=0xAB;
-		drvcmd[3]=0xFF; /* session */
-		response_count=8;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		current_drive->f_multisession=0;
-		response_count=12;
-		drvcmd[0]=CMDT_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[6]=CDROM_LEADOUT;
-		drvcmd[8]=response_count;
-		drvcmd[9]=0x00;
-	}
-	i=cmd_out();
-	if (i<0) return (i);
-	if ((famT_drive)&&(i<response_count)) return (-100-i);
-	if ((fam1_drive)||(fam2_drive)||(fam0LV_drive))
-		current_drive->xa_byte=infobuf[0];
-	if (fam2_drive)
-	{
-		current_drive->first_session=infobuf[1];
-		current_drive->last_session=infobuf[2];
-		current_drive->n_first_track=infobuf[3];
-		current_drive->n_last_track=infobuf[4];
-		if (current_drive->first_session!=current_drive->last_session)
-		{
-			current_drive->f_multisession=1;
-			current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7])));
-		}
-#if 0
-		if (current_drive->first_session!=current_drive->last_session)
-		{
-			if (current_drive->last_session<=20)
-				zwanzig=current_drive->last_session+1;
-			else zwanzig=20;
-			for (count=current_drive->first_session;count<zwanzig;count++)
-			{
-				drvcmd[0]=CMD2_DISKINFO;
-				drvcmd[1]=0x02;
-				drvcmd[2]=0xAB;
-				drvcmd[3]=count;
-				response_count=8;
-				flags_cmd_out=f_putcmd;
-				i=cmd_out();
-				if (i<0) return (i);
-				current_drive->msf_multi_n[count]=make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7]));
-			}
-			current_drive->diskstate_flags |= multisession_bit;
-		}
-#endif
-		drvcmd[0]=CMD2_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[2]=0xAA;
-		drvcmd[3]=0xFF;
-		response_count=5;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) return (i);
-		current_drive->size_msf=make32(make16(0,infobuf[2]),make16(infobuf[3],infobuf[4]));
-		current_drive->size_blk=msf2blk(current_drive->size_msf);
-		current_drive->CDsize_frm=current_drive->size_blk+1;
-	}
-	else if (famT_drive)
-	{
-		current_drive->size_msf=make32(make16(infobuf[8],infobuf[9]),make16(infobuf[10],infobuf[11]));
-		current_drive->size_blk=msf2blk(current_drive->size_msf);
-		current_drive->CDsize_frm=current_drive->size_blk+1;
-		current_drive->n_first_track=infobuf[2];
-		current_drive->n_last_track=infobuf[3];
-	}
-	else
-	{
-		current_drive->n_first_track=infobuf[1];
-		current_drive->n_last_track=infobuf[2];
-		current_drive->size_msf=make32(make16(0,infobuf[3]),make16(infobuf[4],infobuf[5]));
-		current_drive->size_blk=msf2blk(current_drive->size_msf);
-		if (famLV_drive) current_drive->CDsize_frm=current_drive->size_blk+1;
-	}
-	current_drive->diskstate_flags |= toc_bit;
-	msg(DBG_TOC,"TocDesc: xa %02X firstt %02X lastt %02X size %08X firstses %02X lastsess %02X\n",
-	    current_drive->xa_byte,
-	    current_drive->n_first_track,
-	    current_drive->n_last_track,
-	    current_drive->size_msf,
-	    current_drive->first_session,
-	    current_drive->last_session);
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadTocEntry(int num)
-{
-	int i;
-	
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READTOC;
-		drvcmd[2]=num;
-		response_count=8;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		/* possibly longer timeout periods necessary */
-		drvcmd[0]=CMD2_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[2]=num;
-		response_count=5;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_READTOC;
-		drvcmd[1]=0x02;
-		drvcmd[2]=num;
-		response_count=8;
-		if (famLV_drive)
-			flags_cmd_out=f_putcmd;
-		else
-		  flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		response_count=12;
-		drvcmd[0]=CMDT_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[6]=num;
-		drvcmd[8]=response_count;
-		drvcmd[9]=0x00;
-	}
-	i=cmd_out();
-	if (i<0) return (i);
-	if ((famT_drive)&&(i<response_count)) return (-100-i);
-	if ((fam1_drive)||(fam0LV_drive))
-	{
-		current_drive->TocEnt_nixbyte=infobuf[0];
-		i=1;
-	}
-	else if (fam2_drive) i=0;
-	else if (famT_drive) i=5;
-	current_drive->TocEnt_ctl_adr=swap_nibbles(infobuf[i++]);
-	if ((fam1_drive)||(fam0L_drive))
-	{
-		current_drive->TocEnt_number=infobuf[i++];
-		current_drive->TocEnt_format=infobuf[i];
-	}
-	else
-	  {
-	    current_drive->TocEnt_number=num;
-	    current_drive->TocEnt_format=0;
-	  }
-	if (fam1_drive) i=4;
-	else if (fam0LV_drive) i=5;
-	else if (fam2_drive) i=2;
-	else if (famT_drive) i=9;
-	current_drive->TocEnt_address=make32(make16(0,infobuf[i]),
-				     make16(infobuf[i+1],infobuf[i+2]));
-	for (i=0;i<response_count;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_ECS,"TocEntry:%s\n", msgbuf);
-	msg(DBG_TOC,"TocEntry: %02X %02X %02X %02X %08X\n",
-	    current_drive->TocEnt_nixbyte, current_drive->TocEnt_ctl_adr,
-	    current_drive->TocEnt_number, current_drive->TocEnt_format,
-	    current_drive->TocEnt_address);
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadPacket(void)
-{
-	int i;
-	
-	clr_cmdbuf();
-	drvcmd[0]=CMD0_PACKET;
-	drvcmd[1]=response_count;
-	if(famL_drive) flags_cmd_out=f_putcmd;
-	else if (fam01_drive)
-		flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	else if (fam2_drive) return (-1); /* not implemented yet */
-	else if (famT_drive)
-	{
-		return (-1);
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int convert_UPC(u_char *p)
-{
-	int i;
-	
-	p++;
-	if (fam0L_drive) p[13]=0;
-	for (i=0;i<7;i++)
-	{
-		if (fam1_drive) current_drive->UPC_buf[i]=swap_nibbles(*p++);
-		else if (fam0L_drive)
-		{
-			current_drive->UPC_buf[i]=((*p++)<<4)&0xFF;
-			current_drive->UPC_buf[i] |= *p++;
-		}
-		else if (famT_drive)
-		{
-			return (-1);
-		}
-		else /* CD200 */
-		{
-			return (-1);
-		}
-	}
-	current_drive->UPC_buf[6] &= 0xF0;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadUPC(void)
-{
-	int i;
-#if TEST_UPC
-	int block, checksum;
-#endif /* TEST_UPC */ 
-	
-	if (fam2_drive) return (0); /* not implemented yet */
-	if (famT_drive)	return (0); /* not implemented yet */
-	if (famV_drive)	return (0); /* not implemented yet */
-#if 1
-	if (fam0_drive) return (0); /* but it should work */
-#endif
-	
-	current_drive->diskstate_flags &= ~upc_bit;
-#if TEST_UPC
-	for (block=CD_MSF_OFFSET+1;block<CD_MSF_OFFSET+200;block++)
-	{
-#endif /* TEST_UPC */ 
-		clr_cmdbuf();
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_READ_UPC;
-#if TEST_UPC
-			drvcmd[1]=(block>>16)&0xFF;
-			drvcmd[2]=(block>>8)&0xFF;
-			drvcmd[3]=block&0xFF;
-#endif /* TEST_UPC */ 
-			response_count=8;
-			flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-		}
-		else if (fam0L_drive)
-		{
-			drvcmd[0]=CMD0_READ_UPC;
-#if TEST_UPC
-			drvcmd[2]=(block>>16)&0xFF;
-			drvcmd[3]=(block>>8)&0xFF;
-			drvcmd[4]=block&0xFF;
-#endif /* TEST_UPC */ 
-			response_count=0;
-			flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-		}
-		else if (fam2_drive)
-		{
-			return (-1);
-		}
-		else if (famT_drive)
-		{
-			return (-1);
-		}
-		i=cmd_out();
-		if (i<0)
-		{
-			msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i);
-			return (i);
-		}
-		if (fam0L_drive)
-		{
-			response_count=16;
-			if (famL_drive) flags_cmd_out=f_putcmd;
-			i=cc_ReadPacket();
-			if (i<0)
-			{
-				msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i);
-				return (i);
-			}
-		}
-#if TEST_UPC
-		checksum=0;
-#endif /* TEST_UPC */ 
-		for (i=0;i<(fam1_drive?8:16);i++)
-		{
-#if TEST_UPC
-			checksum |= infobuf[i];
-#endif /* TEST_UPC */ 
-			sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-		}
-		msgbuf[i*3]=0;
-		msg(DBG_UPC,"UPC info:%s\n", msgbuf);
-#if TEST_UPC
-		if ((checksum&0x7F)!=0) break;
-	}
-#endif /* TEST_UPC */ 
-	current_drive->UPC_ctl_adr=0;
-	if (fam1_drive) i=0;
-	else i=2;
-	if ((infobuf[i]&0x80)!=0)
-	{
-		convert_UPC(&infobuf[i]);
-		current_drive->UPC_ctl_adr = (current_drive->TocEnt_ctl_adr & 0xF0) | 0x02;
-	}
-	for (i=0;i<7;i++)
-		sprintf(&msgbuf[i*3], " %02X", current_drive->UPC_buf[i]);
-	sprintf(&msgbuf[i*3], " (%02X)", current_drive->UPC_ctl_adr);
-	msgbuf[i*3+5]=0;
-	msg(DBG_UPC,"UPC code:%s\n", msgbuf);
-	current_drive->diskstate_flags |= upc_bit;
-	return (0);
-}
-
-static int sbpcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
-	int i;
-	unsigned char *mcnp = mcn->medium_catalog_number;
-	unsigned char *resp;
-
-	current_drive->diskstate_flags &= ~upc_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READ_UPC;
-		response_count=8;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_READ_UPC;
-		response_count=0;
-		flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (fam2_drive)
-	{
-		return (-1);
-	}
-	else if (famT_drive)
-	{
-		return (-1);
-	}
-	i=cmd_out();
-	if (i<0)
-	{
-		msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i);
-		return (i);
-	}
-	if (fam0L_drive)
-	{
-		response_count=16;
-		if (famL_drive) flags_cmd_out=f_putcmd;
-		i=cc_ReadPacket();
-		if (i<0)
-		{
-			msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i);
-			return (i);
-		}
-	}
-	current_drive->UPC_ctl_adr=0;
-	if (fam1_drive) i=0;
-	else i=2;
-
-	resp = infobuf + i;
-	if (*resp++ == 0x80) {
-		/* packed bcd to single ASCII digits */
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-	}
-	*mcnp = '\0';
-
-	current_drive->diskstate_flags |= upc_bit;
-	return (0);
-}
-
-/*==========================================================================*/
-static int cc_CheckMultiSession(void)
-{
-	int i;
-	
-	if (fam2_drive) return (0);
-	current_drive->f_multisession=0;
-	current_drive->lba_multi=0;
-	if (fam0_drive) return (0);
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_MULTISESS;
-		response_count=6;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-		i=cmd_out();
-		if (i<0) return (i);
-		if ((infobuf[0]&0x80)!=0)
-		{
-			current_drive->f_multisession=1;
-			current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[1]),
-							make16(infobuf[2],infobuf[3])));
-		}
-	}
-	else if (famLV_drive)
-	{
-		drvcmd[0]=CMDL_MULTISESS;
-		drvcmd[1]=3;
-		drvcmd[2]=1;
-		response_count=8;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) return (i);
-		current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),
-						make16(infobuf[6],infobuf[7])));
-	}
-	else if (famT_drive)
-	{
-		response_count=12;
-		drvcmd[0]=CMDT_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[6]=0;
-		drvcmd[8]=response_count;
-		drvcmd[9]=0x40;
-		i=cmd_out();
-		if (i<0) return (i);
-		if (i<response_count) return (-100-i);
-		current_drive->first_session=infobuf[2];
-		current_drive->last_session=infobuf[3];
-		current_drive->track_of_last_session=infobuf[6];
-		if (current_drive->first_session!=current_drive->last_session)
-		{
-			current_drive->f_multisession=1;
-			current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[9]),make16(infobuf[10],infobuf[11])));
-		}
-	}
-	for (i=0;i<response_count;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_MUL,"MultiSession Info:%s (%d)\n", msgbuf, current_drive->lba_multi);
-	if (current_drive->lba_multi>200)
-	{
-		current_drive->f_multisession=1;
-		msg(DBG_MUL,"MultiSession base: %06X\n", current_drive->lba_multi);
-	}
-	return (0);
-}
-/*==========================================================================*/
-#ifdef FUTURE
-static int cc_SubChanInfo(int frame, int count, u_char *buffer)
-	/* "frame" is a RED BOOK (msf-bin) address */
-{
-	int i;
-	
-	if (fam0LV_drive) return (-ENOSYS); /* drive firmware lacks it */
-	if (famT_drive)
-	{
-		return (-1);
-	}
-#if 0
-	if (current_drive->audio_state!=audio_playing) return (-ENODATA);
-#endif
-	clr_cmdbuf();
-	drvcmd[0]=CMD1_SUBCHANINF;
-	drvcmd[1]=(frame>>16)&0xFF;
-	drvcmd[2]=(frame>>8)&0xFF;
-	drvcmd[3]=frame&0xFF;
-	drvcmd[5]=(count>>8)&0xFF;
-	drvcmd[6]=count&0xFF;
-	flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	cmd_type=READ_SC;
-	current_drive->frame_size=CD_FRAMESIZE_SUB;
-	i=cmd_out(); /* which buffer to use? */
-	return (i);
-}
-#endif /* FUTURE */ 
-/*==========================================================================*/
-static void __init check_datarate(void)
-{
-	int i=0;
-	
-	msg(DBG_IOX,"check_datarate entered.\n");
-	datarate=0;
-#if TEST_STI
-	for (i=0;i<=1000;i++) printk(".");
-#endif
-	/* set a timer to make (timed_out_delay!=0) after 1.1 seconds */
-#if 1
-	del_timer(&delay_timer);
-#endif
-	delay_timer.expires=jiffies+11*HZ/10;
-	timed_out_delay=0;
-	add_timer(&delay_timer);
-#if 0
-	msg(DBG_TIM,"delay timer started (11*HZ/10).\n");
-#endif
-	do
-	{
-		i=inb(CDi_status);
-		datarate++;
-#if 1
-		if (datarate>0x6FFFFFFF) break;
-#endif 
-	}
-	while (!timed_out_delay);
-	del_timer(&delay_timer);
-#if 0
-	msg(DBG_TIM,"datarate: %04X\n", datarate);
-#endif
-	if (datarate<65536) datarate=65536;
-	maxtim16=datarate*16;
-	maxtim04=datarate*4;
-	maxtim02=datarate*2;
-	maxtim_8=datarate/32;
-#if LONG_TIMING
-	maxtim_data=datarate/100;
-#else
-	maxtim_data=datarate/300;
-#endif /* LONG_TIMING */ 
-#if 0
-	msg(DBG_TIM,"maxtim_8 %d, maxtim_data %d.\n", maxtim_8, maxtim_data);
-#endif
-}
-/*==========================================================================*/
-#if 0
-static int c2_ReadError(int fam)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=9;
-	clr_respo_buf(9);
-	if (fam==1)
-	{
-		drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
-		i=do_cmd(f_putcmd|f_lopsta|f_getsta|f_ResponseStatus);
-	}
-	else if (fam==2)
-	{
-		drvcmd[0]=CMD2_READ_ERR;
-		i=do_cmd(f_putcmd);
-	}
-	else return (-1);
-	return (i);
-}
-#endif
-/*==========================================================================*/
-static void __init ask_mail(void)
-{
-	int i;
-	
-	msg(DBG_INF, "please mail the following lines to emoenke@gwdg.de\n");
-	msg(DBG_INF, "(don't mail if you are not using the actual kernel):\n");
-	msg(DBG_INF, "%s\n", VERSION);
-	msg(DBG_INF, "address %03X, type %s, drive %s (ID %d)\n",
-	    CDo_command, type, current_drive->drive_model, current_drive->drv_id);
-	for (i=0;i<12;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_INF,"infobuf =%s\n", msgbuf);
-	for (i=0;i<12;i++)
-		sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_INF,"infobuf =%s\n", msgbuf);
-}
-/*==========================================================================*/
-static int __init check_version(void)
-{
-	int i, j, l;
-	int teac_possible=0;
-	
-	msg(DBG_INI,"check_version: id=%d, d=%d.\n", current_drive->drv_id, current_drive - D_S);
-	current_drive->drv_type=0;
-
-	/* check for CR-52x, CR-56x, LCS-7260 and ECS-AT */
-	/* clear any pending error state */
-	clr_cmdbuf();
-	drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
-	response_count=9;
-	flags_cmd_out=f_putcmd;
-	i=cmd_out();
-	if (i<0) msg(DBG_INI,"CMD0_READ_ERR returns %d (ok anyway).\n",i);
-	/* read drive version */
-	clr_cmdbuf();
-	for (i=0;i<12;i++) infobuf[i]=0;
-	drvcmd[0]=CMD0_READ_VER; /* same as CMD1_ and CMDL_ */
-	response_count=12; /* fam1: only 11 */
-	flags_cmd_out=f_putcmd;
-	i=cmd_out();
-	if (i<-1) msg(DBG_INI,"CMD0_READ_VER returns %d\n",i);
-	if (i==-11) teac_possible++;
-	j=0;
-	for (i=0;i<12;i++) j+=infobuf[i];
-	if (j)
-	{
-		for (i=0;i<12;i++)
-			sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_ECS,"infobuf =%s\n", msgbuf);
-		for (i=0;i<12;i++)
-			sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_ECS,"infobuf =%s\n", msgbuf);
-	}
-	for (i=0;i<4;i++) if (infobuf[i]!=family1[i]) break;
-	if (i==4)
-	{
-		current_drive->drive_model[0]='C';
-		current_drive->drive_model[1]='R';
-		current_drive->drive_model[2]='-';
-		current_drive->drive_model[3]='5';
-		current_drive->drive_model[4]=infobuf[i++];
-		current_drive->drive_model[5]=infobuf[i++];
-		current_drive->drive_model[6]=0;
-		current_drive->drv_type=drv_fam1;
-	}
-	if (!current_drive->drv_type)
-	{
-		for (i=0;i<8;i++) if (infobuf[i]!=family0[i]) break;
-		if (i==8)
-		{
-			current_drive->drive_model[0]='C';
-			current_drive->drive_model[1]='R';
-			current_drive->drive_model[2]='-';
-			current_drive->drive_model[3]='5';
-			current_drive->drive_model[4]='2';
-			current_drive->drive_model[5]='x';
-			current_drive->drive_model[6]=0;
-			current_drive->drv_type=drv_fam0;
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		for (i=0;i<8;i++) if (infobuf[i]!=familyL[i]) break;
-		if (i==8)
-		{
-			for (j=0;j<8;j++)
-				current_drive->drive_model[j]=infobuf[j];
-			current_drive->drive_model[8]=0;
-			current_drive->drv_type=drv_famL;
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		for (i=0;i<6;i++) if (infobuf[i]!=familyV[i]) break;
-		if (i==6)
-		{
-			for (j=0;j<6;j++)
-				current_drive->drive_model[j]=infobuf[j];
-			current_drive->drive_model[6]=0;
-			current_drive->drv_type=drv_famV;
-			i+=2; /* 2 blanks before version */
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		/* check for CD200 */
-		clr_cmdbuf();
-		drvcmd[0]=CMD2_READ_ERR;
-		response_count=9;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) msg(DBG_INI,"CMD2_READERR returns %d (ok anyway).\n",i);
-		if (i<0) msg(DBG_000,"CMD2_READERR returns %d (ok anyway).\n",i);
-		/* read drive version */
-		clr_cmdbuf();
-		for (i=0;i<12;i++) infobuf[i]=0;
-		if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-#if 0
-		OUT(CDo_reset,0);
-		sbp_sleep(6*HZ);
-		OUT(CDo_enable,current_drive->drv_sel);
-#endif
-		drvcmd[0]=CMD2_READ_VER;
-		response_count=12;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) msg(DBG_INI,"CMD2_READ_VER returns %d\n",i);
-		if (i==-7) teac_possible++;
-		j=0;
-		for (i=0;i<12;i++) j+=infobuf[i];
-		if (j)
-		{
-			for (i=0;i<12;i++)
-				sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-			msgbuf[i*3]=0;
-			msg(DBG_IDX,"infobuf =%s\n", msgbuf);
-			for (i=0;i<12;i++)
-				sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
-			msgbuf[i*3]=0;
-			msg(DBG_IDX,"infobuf =%s\n", msgbuf);
-		}
-		if (i>=0)
-		{
-			for (i=0;i<5;i++) if (infobuf[i]!=family2[i]) break;
-			if (i==5)
-			{
-				current_drive->drive_model[0]='C';
-				current_drive->drive_model[1]='D';
-				current_drive->drive_model[2]='2';
-				current_drive->drive_model[3]='0';
-				current_drive->drive_model[4]='0';
-				current_drive->drive_model[5]=infobuf[i++];
-				current_drive->drive_model[6]=infobuf[i++];
-				current_drive->drive_model[7]=0;
-				current_drive->drv_type=drv_fam2;
-			}
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		/* check for TEAC CD-55A */
-		msg(DBG_TEA,"teac_possible: %d\n",teac_possible);
-		for (j=1;j<=((current_drive->drv_id==0)?3:1);j++)
-		{
-			for (l=1;l<=((current_drive->drv_id==0)?10:1);l++)
-			{
-				msg(DBG_TEA,"TEAC reset #%d-%d.\n", j, l);
-				if (sbpro_type==1) OUT(CDo_reset,0);
-				else
-				{
-					OUT(CDo_enable,current_drive->drv_sel);
-					OUT(CDo_sel_i_d,0);
-					OUT(CDo_command,CMDT_RESET);
-					for (i=0;i<9;i++) OUT(CDo_command,0);
-				}
-				sbp_sleep(5*HZ/10);
-				OUT(CDo_enable,current_drive->drv_sel);
-				OUT(CDo_sel_i_d,0);
-				i=inb(CDi_status);
-				msg(DBG_TEA,"TEAC CDi_status: %02X.\n",i);
-#if 0
-				if (i&s_not_result_ready) continue; /* drive not present or ready */
-#endif
-				i=inb(CDi_info);
-				msg(DBG_TEA,"TEAC CDi_info: %02X.\n",i);
-				if (i==0x55) break; /* drive found */
-			}
-			if (i==0x55) break; /* drive found */
-		}
-		if (i==0x55) /* drive found */
-		{
-			msg(DBG_TEA,"TEAC drive found.\n");
-			clr_cmdbuf();
-			flags_cmd_out=f_putcmd;
-			response_count=12;
-			drvcmd[0]=CMDT_READ_VER;
-			drvcmd[4]=response_count;
-			for (i=0;i<12;i++) infobuf[i]=0;
-			i=cmd_out_T();
-			if (i!=0) msg(DBG_TEA,"cmd_out_T(CMDT_READ_VER) returns %d.\n",i);
-			for (i=1;i<6;i++) if (infobuf[i]!=familyT[i-1]) break;
-			if (i==6)
-			{
-				current_drive->drive_model[0]='C';
-				current_drive->drive_model[1]='D';
-				current_drive->drive_model[2]='-';
-				current_drive->drive_model[3]='5';
-				current_drive->drive_model[4]='5';
-				current_drive->drive_model[5]=0;
-				current_drive->drv_type=drv_famT;
-			}
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		msg(DBG_TEA,"no drive found at address %03X under ID %d.\n",CDo_command,current_drive->drv_id);
-		return (-522);
-	}
-	for (j=0;j<4;j++) current_drive->firmware_version[j]=infobuf[i+j];
-	if (famL_drive)
-	{
-	  u_char lcs_firm_e1[]="A E1";
-	  u_char lcs_firm_f4[]="A4F4";
-		
-	  for (j=0;j<4;j++)
-	    if (current_drive->firmware_version[j]!=lcs_firm_e1[j]) break;
-	  if (j==4) current_drive->drv_type=drv_e1;
-	  
-	  for (j=0;j<4;j++)
-	    if (current_drive->firmware_version[j]!=lcs_firm_f4[j]) break;
-	  if (j==4) current_drive->drv_type=drv_f4;
-
-	  if (current_drive->drv_type==drv_famL) ask_mail();
-	}
-	else if (famT_drive)
-	{
-		j=infobuf[4]; /* one-byte version??? - here: 0x15 */
-		if (j=='5')
-		{
-			current_drive->firmware_version[0]=infobuf[7];
-			current_drive->firmware_version[1]=infobuf[8];
-			current_drive->firmware_version[2]=infobuf[10];
-			current_drive->firmware_version[3]=infobuf[11];
-		}
-		else
-		{
-			if (j!=0x15) ask_mail();
-			current_drive->firmware_version[0]='0';
-			current_drive->firmware_version[1]='.';
-			current_drive->firmware_version[2]='0'+(j>>4);
-			current_drive->firmware_version[3]='0'+(j&0x0f);
-		}
-	}
-	else /* CR-52x, CR-56x, CD200, ECS-AT */
-	{
-		j = (current_drive->firmware_version[0] & 0x0F) * 100 +
-			(current_drive->firmware_version[2] & 0x0F) *10 +
-				(current_drive->firmware_version[3] & 0x0F);
-		if (fam0_drive)
-		{
-			if (j<200) current_drive->drv_type=drv_199;
-			else if (j<201) current_drive->drv_type=drv_200;
-			else if (j<210) current_drive->drv_type=drv_201;
-			else if (j<211) current_drive->drv_type=drv_210;
-			else if (j<300) current_drive->drv_type=drv_211;
-			else if (j>=300) current_drive->drv_type=drv_300;
-		}
-		else if (fam1_drive)
-		{
-			if (j<100) current_drive->drv_type=drv_099;
-			else
-			{
-				current_drive->drv_type=drv_100;
-				if ((j!=500)&&(j!=102)) ask_mail();
-			}
-		}
-		else if (fam2_drive)
-		{
-			if (current_drive->drive_model[5]=='F')
-			{
-				if ((j!=1)&&(j!=35)&&(j!=200)&&(j!=210))
-				  ask_mail(); /* unknown version at time */
-			}
-			else
-			{
-				msg(DBG_INF,"this CD200 drive is not fully supported yet - only audio will work.\n");
-				if ((j!=101)&&(j!=35))
-				  ask_mail(); /* unknown version at time */
-			}
-		}
-		else if (famV_drive)
-		  {
-		    if ((j==100)||(j==150)) current_drive->drv_type=drv_at;
-		    ask_mail(); /* hopefully we get some feedback by this */
-		  }
-	}
-	msg(DBG_LCS,"drive type %02X\n",current_drive->drv_type);
-	msg(DBG_INI,"check_version done.\n");
-	return (0);
-}
-/*==========================================================================*/
-static void switch_drive(struct sbpcd_drive *p)
-{
-	current_drive = p;
-	OUT(CDo_enable,current_drive->drv_sel);
-	msg(DBG_DID,"drive %d (ID=%d) activated.\n",
-		current_drive - D_S, current_drive->drv_id);
-	return;
-}
-/*==========================================================================*/
-#ifdef PATH_CHECK
-/*
- * probe for the presence of an interface card
- */
-static int __init check_card(int port)
-{
-#undef N_RESPO
-#define N_RESPO 20
-	int i, j, k;
-	u_char response[N_RESPO];
-	u_char save_port0;
-	u_char save_port3;
-	
-	msg(DBG_INI,"check_card entered.\n");
-	save_port0=inb(port+0);
-	save_port3=inb(port+3);
-	
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		OUT(port+3,j) ; /* enable drive #j */
-		OUT(port+0,CMD0_PATH_CHECK);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=10000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
-		OUT(port+0,CMD0_PATH_CHECK);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0xFF;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=10000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
-
-		if (response[0]==0xAA)
-			if (response[1]==0x55)
-				return (0);
-	}
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		OUT(port+3,j) ; /* enable drive #j */
-		OUT(port+0,CMD2_READ_VER);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=1000000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
-
-		OUT(port+0,CMD2_READ_VER);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0xFF;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=1000000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
-
-		if (response[0]==0xAA)
-			if (response[1]==0x55)
-				return (0);
-	}
-	OUT(port+0,save_port0);
-	OUT(port+3,save_port3);
-	return (0); /* in any case - no real "function" at time */
-}
-#endif /* PATH_CHECK */ 
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * probe for the presence of drives on the selected controller
- */
-static int __init check_drives(void)
-{
-	int i, j;
-	
-	msg(DBG_INI,"check_drives entered.\n");
-	ndrives=0;
-	for (j=0;j<max_drives;j++)
-	{
-		struct sbpcd_drive *p = D_S + ndrives;
-		p->drv_id=j;
-		if (sbpro_type==1) p->drv_sel=(j&0x01)<<1|(j&0x02)>>1;
-		else p->drv_sel=j;
-		switch_drive(p);
-		msg(DBG_INI,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
-		msg(DBG_000,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
-		i=check_version();
-		if (i<0) msg(DBG_INI,"check_version returns %d.\n",i);
-		else
-		{
-			current_drive->drv_options=drv_pattern[j];
-			if (fam0L_drive) current_drive->drv_options&=~(speed_auto|speed_300|speed_150);
-			msg(DBG_INF, "Drive %d (ID=%d): %.9s (%.4s) at 0x%03X (type %d)\n",
-			    current_drive - D_S,
-			    current_drive->drv_id,
-			    current_drive->drive_model,
-			    current_drive->firmware_version,
-			    CDo_command,
-			    sbpro_type);
-			ndrives++;
-		}
-	}
-	for (j=ndrives;j<NR_SBPCD;j++) D_S[j].drv_id=-1;
-	if (ndrives==0) return (-1);
-	return (0);
-}
-/*==========================================================================*/
-#ifdef FUTURE
-/*
- *  obtain if requested service disturbs current audio state
- */            
-static int obey_audio_state(u_char audio_state, u_char func,u_char subfunc)
-{
-	switch (audio_state)                   /* audio status from controller  */
-	{
-	case aud_11: /* "audio play in progress" */
-	case audx11:
-		switch (func)                      /* DOS command code */
-		{
-		case cmd_07: /* input flush  */
-		case cmd_0d: /* open device  */
-		case cmd_0e: /* close device */
-		case cmd_0c: /* ioctl output */
-			return (1);
-		case cmd_03: /* ioctl input  */
-			switch (subfunc)
-				/* DOS ioctl input subfunction */
-			{
-			case cxi_00:
-			case cxi_06:
-			case cxi_09:
-				return (1);
-			default:
-				return (ERROR15);
-			}
-			return (1);
-		default:
-			return (ERROR15);
-		}
-		return (1);
-	case aud_12:                  /* "audio play paused"      */
-	case audx12:
-		return (1);
-	default:
-		return (2);
-	}
-}
-/*==========================================================================*/
-/* allowed is only
- * ioctl_o, flush_input, open_device, close_device, 
- * tell_address, tell_volume, tell_capabiliti,
- * tell_framesize, tell_CD_changed, tell_audio_posi
- */
-static int check_allowed1(u_char func1, u_char func2)
-{
-#if 000
-	if (func1==ioctl_o) return (0);
-	if (func1==read_long) return (-1);
-	if (func1==read_long_prefetch) return (-1);
-	if (func1==seek) return (-1);
-	if (func1==audio_play) return (-1);
-	if (func1==audio_pause) return (-1);
-	if (func1==audio_resume) return (-1);
-	if (func1!=ioctl_i) return (0);
-	if (func2==tell_SubQ_run_tot) return (-1);
-	if (func2==tell_cdsize) return (-1);
-	if (func2==tell_TocDescrip) return (-1);
-	if (func2==tell_TocEntry) return (-1);
-	if (func2==tell_subQ_info) return (-1);
-	if (fam1_drive) if (func2==tell_SubChanInfo) return (-1);
-	if (func2==tell_UPC) return (-1);
-#else
-	return (0);
-#endif
-}
-/*==========================================================================*/
-static int check_allowed2(u_char func1, u_char func2)
-{
-#if 000
-	if (func1==read_long) return (-1);
-	if (func1==read_long_prefetch) return (-1);
-	if (func1==seek) return (-1);
-	if (func1==audio_play) return (-1);
-  if (func1!=ioctl_o) return (0);
-	if (fam1_drive)
-	{
-		if (func2==EjectDisk) return (-1);
-		if (func2==CloseTray) return (-1);
-	}
-#else
-	return (0);
-#endif
-}
-/*==========================================================================*/
-static int check_allowed3(u_char func1, u_char func2)
-{
-#if 000
-	if (func1==ioctl_i)
-	{
-		if (func2==tell_address) return (0);
-		if (func2==tell_capabiliti) return (0);
-		if (func2==tell_CD_changed) return (0);
-		if (fam0L_drive) if (func2==tell_SubChanInfo) return (0);
-		return (-1);
-	}
-	if (func1==ioctl_o)
-	{
-		if (func2==DriveReset) return (0);
-		if (fam0L_drive)
-		{
-			if (func2==EjectDisk) return (0);
-			if (func2==LockDoor) return (0);
-	  if (func2==CloseTray) return (0);
-		}
-		return (-1);
-    }
-	if (func1==flush_input) return (-1);
-	if (func1==read_long) return (-1);
-	if (func1==read_long_prefetch) return (-1);
-	if (func1==seek) return (-1);
-	if (func1==audio_play) return (-1);
-	if (func1==audio_pause) return (-1);
-	if (func1==audio_resume) return (-1);
-#else
-	return (0);
-#endif
-}
-/*==========================================================================*/
-static int seek_pos_audio_end(void)
-{
-	int i;
-
-	i=msf2blk(current_drive->pos_audio_end)-1;
-	if (i<0) return (-1);
-	i=cc_Seek(i,0);
-	return (i);
-}
-#endif /* FUTURE */ 
-/*==========================================================================*/
-static int ReadToC(void)
-{
-	int i, j;
-	current_drive->diskstate_flags &= ~toc_bit;
-	current_drive->ored_ctl_adr=0;
-	/* special handling of CD-I HE */
-	if ((current_drive->n_first_track == 2 && current_drive->n_last_track == 2) ||
-             current_drive->xa_byte == 0x10)
-        {
-		current_drive->TocBuffer[1].nixbyte=0;
-		current_drive->TocBuffer[1].ctl_adr=0x40;
-		current_drive->TocBuffer[1].number=1;
-		current_drive->TocBuffer[1].format=0;
-		current_drive->TocBuffer[1].address=blk2msf(0);
-		current_drive->ored_ctl_adr |= 0x40;
-		current_drive->n_first_track = 1;
-		current_drive->n_last_track = 1;
-		current_drive->xa_byte = 0x10;
-                j = 2;
-        } else
-	for (j=current_drive->n_first_track;j<=current_drive->n_last_track;j++)
-	{
-		i=cc_ReadTocEntry(j);
-		if (i<0)
-		{
-			msg(DBG_INF,"cc_ReadTocEntry(%d) returns %d.\n",j,i);
-			return (i);
-		}
-		current_drive->TocBuffer[j].nixbyte=current_drive->TocEnt_nixbyte;
-		current_drive->TocBuffer[j].ctl_adr=current_drive->TocEnt_ctl_adr;
-		current_drive->TocBuffer[j].number=current_drive->TocEnt_number;
-		current_drive->TocBuffer[j].format=current_drive->TocEnt_format;
-		current_drive->TocBuffer[j].address=current_drive->TocEnt_address;
-		current_drive->ored_ctl_adr |= current_drive->TocEnt_ctl_adr;
-	}
-	/* fake entry for LeadOut Track */
-	current_drive->TocBuffer[j].nixbyte=0;
-	current_drive->TocBuffer[j].ctl_adr=0;
-	current_drive->TocBuffer[j].number=CDROM_LEADOUT;
-	current_drive->TocBuffer[j].format=0;
-	current_drive->TocBuffer[j].address=current_drive->size_msf;
-	
-	current_drive->diskstate_flags |= toc_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int DiskInfo(void)
-{
-	int i, j;
-	
-	current_drive->mode=READ_M1;
-	
-#undef LOOP_COUNT
-#define LOOP_COUNT 10 /* needed for some "old" drives */
-	
-	msg(DBG_000,"DiskInfo entered.\n");
-	for (j=1;j<LOOP_COUNT;j++)
-	{
-#if 0
-		i=SetSpeed();
-		if (i<0)
-		{
-			msg(DBG_INF,"DiskInfo: SetSpeed returns %d\n", i);
-			continue;
-		}
-		i=cc_ModeSense();
-		if (i<0)
-		{
-			msg(DBG_INF,"DiskInfo: cc_ModeSense returns %d\n", i);
-			continue;
-		}
-#endif
-		i=cc_ReadCapacity();
-		if (i>=0) break;
-		msg(DBG_INF,"DiskInfo: ReadCapacity #%d returns %d\n", j, i);
-#if 0
-		i=cc_DriveReset();
-#endif
-		if (!fam0_drive && j == 2) break;
-	}
-	if (j==LOOP_COUNT) return (-33); /* give up */
-	
-	i=cc_ReadTocDescr();
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: ReadTocDescr returns %d\n", i);
-		return (i);
-	}
-	i=ReadToC();
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: ReadToC returns %d\n", i);
-		return (i);
-	}
-	i=cc_CheckMultiSession();
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: cc_CheckMultiSession returns %d\n", i);
-		return (i);
-	}
-	if (current_drive->f_multisession) current_drive->sbp_bufsiz=1;  /* possibly a weird PhotoCD */
-	else current_drive->sbp_bufsiz=buffers;
-	i=cc_ReadTocEntry(current_drive->n_first_track);
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: cc_ReadTocEntry(1) returns %d\n", i);
-		return (i);
-	}
-	i=cc_ReadUPC();
-	if (i<0) msg(DBG_INF,"DiskInfo: cc_ReadUPC returns %d\n", i);
-	if ((fam0L_drive) && (current_drive->xa_byte==0x20 || current_drive->xa_byte == 0x10))
-	{
-		/* XA disk with old drive */
-		cc_ModeSelect(CD_FRAMESIZE_RAW1);
-		cc_ModeSense();
-	}
-	if (famT_drive)	cc_prep_mode_T();
-	msg(DBG_000,"DiskInfo done.\n");
-	return (0);
-}
-
-static int sbpcd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	int st;
-
-	if (CDSL_CURRENT != slot_nr) {
-		 /* we have no changer support */
-		 return -EINVAL;
-	}
-
-        cc_ReadStatus();
-	st=ResponseStatus();
-	if (st<0)
-	{
-		msg(DBG_INF,"sbpcd_drive_status: timeout.\n");
-		return (0);
-	}
-	msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked);
-	msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed);
-	msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in);
-	msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok);
-	msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning);
-	msg(DBG_000,"Drive Status: busy =%d.\n", st_busy);
-
-#if 0
-  if (!(p->status_bits & p_door_closed)) return CDS_TRAY_OPEN;
-  if (p->status_bits & p_disk_ok) return CDS_DISC_OK;
-  if (p->status_bits & p_disk_in) return CDS_DRIVE_NOT_READY;
-
-  return CDS_NO_DISC;
-#else
-  if (p->status_bits & p_spinning) return CDS_DISC_OK;
-/*  return CDS_TRAY_OPEN; */
-  return CDS_NO_DISC;
-  
-#endif
-
-}
-
-
-/*==========================================================================*/
-#ifdef FUTURE
-/*
- *  called always if driver gets entered
- *  returns 0 or ERROR2 or ERROR15
- */
-static int prepare(u_char func, u_char subfunc)
-{
-	int i;
-	
-	if (fam0L_drive)
-	{
-		i=inb(CDi_status);
-		if (i&s_attention) GetStatus();
-	}
-	else if (fam1_drive) GetStatus();
-	else if (fam2_drive) GetStatus();
-	else if (famT_drive) GetStatus();
-	if (current_drive->CD_changed==0xFF)
-	{
-		current_drive->diskstate_flags=0;
-		current_drive->audio_state=0;
-		if (!st_diskok)
-		{
-			i=check_allowed1(func,subfunc);
-			if (i<0) return (-2);
-		}
-		else 
-		{
-			i=check_allowed3(func,subfunc);
-			if (i<0)
-			{
-				current_drive->CD_changed=1;
-				return (-15);
-			}
-		}
-	}
-	else
-	{
-		if (!st_diskok)
-		{
-			current_drive->diskstate_flags=0;
-			current_drive->audio_state=0;
-			i=check_allowed1(func,subfunc);
-			if (i<0) return (-2);
-		}
-		else
-		{ 
-			if (st_busy)
-			{
-				if (current_drive->audio_state!=audio_pausing)
-				{
-					i=check_allowed2(func,subfunc);
-					if (i<0) return (-2);
-				}
-			}
-			else
-			{
-				if (current_drive->audio_state==audio_playing) seek_pos_audio_end();
-				current_drive->audio_state=0;
-			}
-			if (!frame_size_valid)
-			{
-				i=DiskInfo();
-				if (i<0)
-				{
-					current_drive->diskstate_flags=0;
-					current_drive->audio_state=0;
-					i=check_allowed1(func,subfunc);
-					if (i<0) return (-2);
-				}
-			}
-		}
-    }
-	return (0);
-}
-#endif /* FUTURE */ 
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * Check the results of the "get status" command.
- */
-static int sbp_status(void)
-{
-	int st;
-	
-	st=ResponseStatus();
-	if (st<0)
-	{
-		msg(DBG_INF,"sbp_status: timeout.\n");
-		return (0);
-	}
-	
-	if (!st_spinning) msg(DBG_SPI,"motor got off - ignoring.\n");
-	
-	if (st_check) 
-	{
-		msg(DBG_INF,"st_check detected - retrying.\n");
-		return (0);
-	}
-	if (!st_door_closed)
-	{
-		msg(DBG_INF,"door is open - retrying.\n");
-		return (0);
-	}
-	if (!st_caddy_in)
-	{
-		msg(DBG_INF,"disk removed - retrying.\n");
-		return (0);
-	}
-	if (!st_diskok) 
-	{
-		msg(DBG_INF,"!st_diskok detected - retrying.\n");
-		return (0);
-	}
-	if (st_busy) 
-	{
-		msg(DBG_INF,"st_busy detected - retrying.\n");
-		return (0);
-	}
-	return (1);
-}
-/*==========================================================================*/
-		
-static int sbpcd_get_last_session(struct cdrom_device_info *cdi, struct cdrom_multisession *ms_infp)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	ms_infp->addr_format = CDROM_LBA;
-	ms_infp->addr.lba    = p->lba_multi;
-	if (p->f_multisession)
-		ms_infp->xa_flag=1; /* valid redirection address */
-	else
-		ms_infp->xa_flag=0; /* invalid redirection address */
-
-	return  0;
-}
-
-static int sbpcd_audio_ioctl(struct cdrom_device_info *cdi, u_int cmd,
-		       void * arg)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	int i, st, j;
-	
-	msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08p)\n", cdi->name, cmd, arg);
-	if (p->drv_id==-1) {
-		msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name);
-		return (-ENXIO);             /* no such drive */
-	}
-	down(&ioctl_read_sem);
-	if (p != current_drive)
-		switch_drive(p);
-	
-	msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd);
-	switch (cmd) 		/* Sun-compatible */
-	{
-		
-	case CDROMPAUSE:     /* Pause the drive */
-		msg(DBG_IOC,"ioctl: CDROMPAUSE entered.\n");
-		/* pause the drive unit when it is currently in PLAY mode,         */
-		/* or reset the starting and ending locations when in PAUSED mode. */
-		/* If applicable, at the next stopping point it reaches            */
-		/* the drive will discontinue playing.                             */
-		switch (current_drive->audio_state)
-		{
-		case audio_playing:
-			if (famL_drive) i=cc_ReadSubQ();
-			else i=cc_Pause_Resume(1);
-			if (i<0) RETURN_UP(-EIO);
-			if (famL_drive) i=cc_Pause_Resume(1);
-			else i=cc_ReadSubQ();
-			if (i<0) RETURN_UP(-EIO);
-			current_drive->pos_audio_start=current_drive->SubQ_run_tot;
-			current_drive->audio_state=audio_pausing;
-			RETURN_UP(0);
-		case audio_pausing:
-			i=cc_Seek(current_drive->pos_audio_start,1);
-			if (i<0) RETURN_UP(-EIO);
-			RETURN_UP(0);
-		default:
-			RETURN_UP(-EINVAL);
-		}
-
-	case CDROMRESUME: /* resume paused audio play */
-		msg(DBG_IOC,"ioctl: CDROMRESUME entered.\n");
-		/* resume playing audio tracks when a previous PLAY AUDIO call has  */
-		/* been paused with a PAUSE command.                                */
-		/* It will resume playing from the location saved in SubQ_run_tot.  */
-		if (current_drive->audio_state!=audio_pausing) RETURN_UP(-EINVAL);
-		if (famL_drive)
-			i=cc_PlayAudio(current_drive->pos_audio_start,
-				       current_drive->pos_audio_end);
-		else i=cc_Pause_Resume(3);
-		if (i<0) RETURN_UP(-EIO);
-		current_drive->audio_state=audio_playing;
-		RETURN_UP(0);
-
-	case CDROMPLAYMSF:
-		msg(DBG_IOC,"ioctl: CDROMPLAYMSF entered.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		if (current_drive->audio_state==audio_playing)
-		{
-			i=cc_Pause_Resume(1);
-			if (i<0) RETURN_UP(-EIO);
-			i=cc_ReadSubQ();
-			if (i<0) RETURN_UP(-EIO);
-			current_drive->pos_audio_start=current_drive->SubQ_run_tot;
-			i=cc_Seek(current_drive->pos_audio_start,1);
-		}
-		memcpy(&msf, (void *) arg, sizeof(struct cdrom_msf));
-		/* values come as msf-bin */
-		current_drive->pos_audio_start = (msf.cdmsf_min0<<16) |
-                        (msf.cdmsf_sec0<<8) |
-				msf.cdmsf_frame0;
-		current_drive->pos_audio_end = (msf.cdmsf_min1<<16) |
-			(msf.cdmsf_sec1<<8) |
-				msf.cdmsf_frame1;
-		msg(DBG_IOX,"ioctl: CDROMPLAYMSF %08X %08X\n",
-		    current_drive->pos_audio_start,current_drive->pos_audio_end);
-		i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end);
-		if (i<0)
-		{
-			msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i);
-			DriveReset();
-			current_drive->audio_state=0;
-			RETURN_UP(-EIO);
-		}
-		current_drive->audio_state=audio_playing;
-		RETURN_UP(0);
-		
-	case CDROMPLAYTRKIND: /* Play a track.  This currently ignores index. */
-		msg(DBG_IOC,"ioctl: CDROMPLAYTRKIND entered.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		if (current_drive->audio_state==audio_playing)
-		{
-			msg(DBG_IOX,"CDROMPLAYTRKIND: already audio_playing.\n");
-#if 1
-			RETURN_UP(0); /* just let us play on */
-#else
-			RETURN_UP(-EINVAL); /* play on, but say "error" */
-#endif
-		}
-		memcpy(&ti,(void *) arg,sizeof(struct cdrom_ti));
-		msg(DBG_IOX,"ioctl: trk0: %d, ind0: %d, trk1:%d, ind1:%d\n",
-		    ti.cdti_trk0,ti.cdti_ind0,ti.cdti_trk1,ti.cdti_ind1);
-		if (ti.cdti_trk0<current_drive->n_first_track) RETURN_UP(-EINVAL);
-		if (ti.cdti_trk0>current_drive->n_last_track) RETURN_UP(-EINVAL);
-		if (ti.cdti_trk1<ti.cdti_trk0) ti.cdti_trk1=ti.cdti_trk0;
-		if (ti.cdti_trk1>current_drive->n_last_track) ti.cdti_trk1=current_drive->n_last_track;
-		current_drive->pos_audio_start=current_drive->TocBuffer[ti.cdti_trk0].address;
-		current_drive->pos_audio_end=current_drive->TocBuffer[ti.cdti_trk1+1].address;
-		i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end);
-		if (i<0)
-		{
-			msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i);
-			DriveReset();
-			current_drive->audio_state=0;
-			RETURN_UP(-EIO);
-		}
-		current_drive->audio_state=audio_playing;
-		RETURN_UP(0);
-		
-	case CDROMREADTOCHDR:        /* Read the table of contents header */
-		msg(DBG_IOC,"ioctl: CDROMREADTOCHDR entered.\n");
-		tochdr.cdth_trk0=current_drive->n_first_track;
-		tochdr.cdth_trk1=current_drive->n_last_track;
-		memcpy((void *) arg, &tochdr, sizeof(struct cdrom_tochdr));
-		RETURN_UP(0);
-		
-	case CDROMREADTOCENTRY:      /* Read an entry in the table of contents */
-		msg(DBG_IOC,"ioctl: CDROMREADTOCENTRY entered.\n");
-		memcpy(&tocentry, (void *) arg, sizeof(struct cdrom_tocentry));
-		i=tocentry.cdte_track;
-		if (i==CDROM_LEADOUT) i=current_drive->n_last_track+1;
-		else if (i<current_drive->n_first_track||i>current_drive->n_last_track)
-                  RETURN_UP(-EINVAL);
-		tocentry.cdte_adr=current_drive->TocBuffer[i].ctl_adr&0x0F;
-		tocentry.cdte_ctrl=(current_drive->TocBuffer[i].ctl_adr>>4)&0x0F;
-		tocentry.cdte_datamode=current_drive->TocBuffer[i].format;
-		if (tocentry.cdte_format==CDROM_MSF) /* MSF-bin required */
-		{
-			tocentry.cdte_addr.msf.minute=(current_drive->TocBuffer[i].address>>16)&0x00FF;
-			tocentry.cdte_addr.msf.second=(current_drive->TocBuffer[i].address>>8)&0x00FF;
-			tocentry.cdte_addr.msf.frame=current_drive->TocBuffer[i].address&0x00FF;
-		}
-		else if (tocentry.cdte_format==CDROM_LBA) /* blk required */
-			tocentry.cdte_addr.lba=msf2blk(current_drive->TocBuffer[i].address);
-		else RETURN_UP(-EINVAL);
-		memcpy((void *) arg, &tocentry, sizeof(struct cdrom_tocentry));
-		RETURN_UP(0);
-		
-	case CDROMSTOP:      /* Spin down the drive */
-		msg(DBG_IOC,"ioctl: CDROMSTOP entered.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */ 
-		i=cc_Pause_Resume(1);
-		current_drive->audio_state=0;
-#if 0
-		cc_DriveReset();
-#endif
-		RETURN_UP(i);
-
-	case CDROMSTART:  /* Spin up the drive */
-		msg(DBG_IOC,"ioctl: CDROMSTART entered.\n");
-		cc_SpinUp();
-		current_drive->audio_state=0;
-		RETURN_UP(0);
-
-	case CDROMVOLCTRL:   /* Volume control */
-		msg(DBG_IOC,"ioctl: CDROMVOLCTRL entered.\n");
-		memcpy(&volctrl,(char *) arg,sizeof(volctrl));
-		current_drive->vol_chan0=0;
-		current_drive->vol_ctrl0=volctrl.channel0;
-		current_drive->vol_chan1=1;
-		current_drive->vol_ctrl1=volctrl.channel1;
-		i=cc_SetVolume();
-		RETURN_UP(0);
-
-	case CDROMVOLREAD:   /* read Volume settings from drive */
-		msg(DBG_IOC,"ioctl: CDROMVOLREAD entered.\n");
-		st=cc_GetVolume();
-		if (st<0) RETURN_UP(st);
-		volctrl.channel0=current_drive->vol_ctrl0;
-		volctrl.channel1=current_drive->vol_ctrl1;
-		volctrl.channel2=0;
-		volctrl.channel2=0;
-		memcpy((void *)arg,&volctrl,sizeof(volctrl));
-		RETURN_UP(0);
-
-	case CDROMSUBCHNL:   /* Get subchannel info */
-		msg(DBG_IOS,"ioctl: CDROMSUBCHNL entered.\n");
-		/* Bogus, I can do better than this! --AJK
-		if ((st_spinning)||(!subq_valid)) {
-			i=cc_ReadSubQ();
-			if (i<0) RETURN_UP(-EIO);
-		}
-		*/
-		i=cc_ReadSubQ();
-		if (i<0) {
-			j=cc_ReadError(); /* clear out error status from drive */
-			current_drive->audio_state=CDROM_AUDIO_NO_STATUS;
-			/* get and set the disk state here,
-			probably not the right place, but who cares!
-			It makes it work properly! --AJK */
-			if (current_drive->CD_changed==0xFF) {
-				msg(DBG_000,"Disk changed detect\n");
-				current_drive->diskstate_flags &= ~cd_size_bit;
-			}
-			RETURN_UP(-EIO);
-		}
-		if (current_drive->CD_changed==0xFF) {
-			/* reread the TOC because the disk has changed! --AJK */
-			msg(DBG_000,"Disk changed STILL detected, rereading TOC!\n");
-			i=DiskInfo();
-			if(i==0) {
-				current_drive->CD_changed=0x00; /* cd has changed, procede, */
-				RETURN_UP(-EIO); /* and get TOC, etc on next try! --AJK */
-			} else {
-				RETURN_UP(-EIO); /* we weren't ready yet! --AJK */
-			}
-		}
-		memcpy(&SC, (void *) arg, sizeof(struct cdrom_subchnl));
-		/*
-			This virtual crap is very bogus!
-			It doesn't detect when the cd is done playing audio!
-			Lets do this right with proper hardware register reading!
-		*/
-		cc_ReadStatus();
-		i=ResponseStatus();
-		msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked);
-		msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed);
-		msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in);
-		msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok);
-		msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning);
-		msg(DBG_000,"Drive Status: busy =%d.\n", st_busy);
-		/* st_busy indicates if it's _ACTUALLY_ playing audio */
-		switch (current_drive->audio_state)
-		{
-		case audio_playing:
-			if(st_busy==0) {
-				/* CD has stopped playing audio --AJK */
-				current_drive->audio_state=audio_completed;
-				SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED;
-			} else {
-				SC.cdsc_audiostatus=CDROM_AUDIO_PLAY;
-			}
-			break;
-		case audio_pausing:
-			SC.cdsc_audiostatus=CDROM_AUDIO_PAUSED;
-			break;
-		case audio_completed:
-			SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED;
-			break;
-		default:
-			SC.cdsc_audiostatus=CDROM_AUDIO_NO_STATUS;
-			break;
-		}
-		SC.cdsc_adr=current_drive->SubQ_ctl_adr;
-		SC.cdsc_ctrl=current_drive->SubQ_ctl_adr>>4;
-		SC.cdsc_trk=bcd2bin(current_drive->SubQ_trk);
-		SC.cdsc_ind=bcd2bin(current_drive->SubQ_pnt_idx);
-		if (SC.cdsc_format==CDROM_LBA)
-		{
-			SC.cdsc_absaddr.lba=msf2blk(current_drive->SubQ_run_tot);
-			SC.cdsc_reladdr.lba=msf2blk(current_drive->SubQ_run_trk);
-		}
-		else /* not only if (SC.cdsc_format==CDROM_MSF) */
-		{
-			SC.cdsc_absaddr.msf.minute=(current_drive->SubQ_run_tot>>16)&0x00FF;
-			SC.cdsc_absaddr.msf.second=(current_drive->SubQ_run_tot>>8)&0x00FF;
-			SC.cdsc_absaddr.msf.frame=current_drive->SubQ_run_tot&0x00FF;
-			SC.cdsc_reladdr.msf.minute=(current_drive->SubQ_run_trk>>16)&0x00FF;
-			SC.cdsc_reladdr.msf.second=(current_drive->SubQ_run_trk>>8)&0x00FF;
-			SC.cdsc_reladdr.msf.frame=current_drive->SubQ_run_trk&0x00FF;
-		}
-		memcpy((void *) arg, &SC, sizeof(struct cdrom_subchnl));
-		msg(DBG_IOS,"CDROMSUBCHNL: %1X %02X %08X %08X %02X %02X %06X %06X\n",
-		    SC.cdsc_format,SC.cdsc_audiostatus,
-		    SC.cdsc_adr,SC.cdsc_ctrl,
-		    SC.cdsc_trk,SC.cdsc_ind,
-		    SC.cdsc_absaddr,SC.cdsc_reladdr);
-		RETURN_UP(0);
-
-	default:
-		msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
-		RETURN_UP(-EINVAL);
-	} /* end switch(cmd) */
-}
-/*==========================================================================*/
-/*
- *  Take care of the different block sizes between cdrom and Linux.
- */
-static void sbp_transfer(struct request *req)
-{
-	long offs;
-
-	while ( (req->nr_sectors > 0) &&
-	       (req->sector/4 >= current_drive->sbp_first_frame) &&
-	       (req->sector/4 <= current_drive->sbp_last_frame) )
-	{
-		offs = (req->sector - current_drive->sbp_first_frame * 4) * 512;
-		memcpy(req->buffer, current_drive->sbp_buf + offs, 512);
-		req->nr_sectors--;
-		req->sector++;
-		req->buffer += 512;
-	}
-}
-/*==========================================================================*/
-/*
- *  special end_request for sbpcd to solve CURRENT==NULL bug. (GTL)
- *  GTL = Gonzalo Tornaria <tornaria@cmat.edu.uy>
- *
- *  This is a kludge so we don't need to modify end_request.
- *  We put the req we take out after INIT_REQUEST in the requests list,
- *  so that end_request will discard it.
- *
- *  The bug could be present in other block devices, perhaps we
- *  should modify INIT_REQUEST and end_request instead, and
- *  change every block device..
- *
- *  Could be a race here?? Could e.g. a timer interrupt schedule() us?
- *  If so, we should copy end_request here, and do it right.. (or
- *  modify end_request and the block devices).
- *
- *  In any case, the race here would be much small than it was, and
- *  I couldn't reproduce..
- *
- *  The race could be: suppose CURRENT==NULL. We put our req in the list,
- *  and we are scheduled. Other process takes over, and gets into
- *  do_sbpcd_request. It sees CURRENT!=NULL (it is == to our req), so
- *  proceeds. It ends, so CURRENT is now NULL.. Now we awake somewhere in
- *  end_request, but now CURRENT==NULL... oops!
- *
- */
-#undef DEBUG_GTL
-
-/*==========================================================================*/
-/*
- *  I/O request routine, called from Linux kernel.
- */
-static void do_sbpcd_request(request_queue_t * q)
-{
-	u_int block;
-	u_int nsect;
-	int status_tries, data_tries;
-	struct request *req;
-	struct sbpcd_drive *p;
-#ifdef DEBUG_GTL
-	static int xx_nr=0;
-	int xnr;
-#endif
-
- request_loop:
-#ifdef DEBUG_GTL
-	xnr=++xx_nr;
-
-	req = elv_next_request(q);
-
-	if (!req)
-	{
-		printk( "do_sbpcd_request[%di](NULL), Pid:%d, Time:%li\n",
-			xnr, current->pid, jiffies);
-		printk( "do_sbpcd_request[%do](NULL) end 0 (null), Time:%li\n",
-			xnr, jiffies);
-		return;
-	}
-
-	printk(" do_sbpcd_request[%di](%p:%ld+%ld), Pid:%d, Time:%li\n",
-		xnr, req, req->sector, req->nr_sectors, current->pid, jiffies);
-#endif
-
-	req = elv_next_request(q);	/* take out our request so no other */
-	if (!req)
-		return;
-
-	if (req -> sector == -1)
-		end_request(req, 0);
-	spin_unlock_irq(q->queue_lock);
-
-	down(&ioctl_read_sem);
-	if (rq_data_dir(elv_next_request(q)) != READ)
-	{
-		msg(DBG_INF, "bad cmd %d\n", req->cmd[0]);
-		goto err_done;
-	}
-	p = req->rq_disk->private_data;
-#if OLD_BUSY
-	while (busy_audio) sbp_sleep(HZ); /* wait a bit */
-	busy_data=1;
-#endif /* OLD_BUSY */
-
-	if (p->audio_state==audio_playing) goto err_done;
-	if (p != current_drive)
-		switch_drive(p);
-
-	block = req->sector; /* always numbered as 512-byte-pieces */
-	nsect = req->nr_sectors; /* always counted as 512-byte-pieces */
-
-	msg(DBG_BSZ,"read sector %d (%d sectors)\n", block, nsect);
-#if 0
-	msg(DBG_MUL,"read LBA %d\n", block/4);
-#endif
-
-	sbp_transfer(req);
-	/* if we satisfied the request from the buffer, we're done. */
-	if (req->nr_sectors == 0)
-	{
-#ifdef DEBUG_GTL
-		printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 2, Time:%li\n",
-			xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
-		up(&ioctl_read_sem);
-		spin_lock_irq(q->queue_lock);
-		end_request(req, 1);
-		goto request_loop;
-	}
-
-#ifdef FUTURE
-	i=prepare(0,0); /* at moment not really a hassle check, but ... */
-	if (i!=0)
-		msg(DBG_INF,"\"prepare\" tells error %d -- ignored\n", i);
-#endif /* FUTURE */
-
-	if (!st_spinning) cc_SpinUp();
-
-	for (data_tries=n_retries; data_tries > 0; data_tries--)
-	{
-		for (status_tries=3; status_tries > 0; status_tries--)
-		{
-			flags_cmd_out |= f_respo3;
-			cc_ReadStatus();
-			if (sbp_status() != 0) break;
-			if (st_check) cc_ReadError();
-			sbp_sleep(1);    /* wait a bit, try again */
-		}
-		if (status_tries == 0)
-		{
-			msg(DBG_INF,"sbp_status: failed after 3 tries in line %d\n", __LINE__);
-			break;
-		}
-		
-		sbp_read_cmd(req);
-		sbp_sleep(0);
-		if (sbp_data(req) != 0)
-		{
-#ifdef SAFE_MIXED
-			current_drive->has_data=2; /* is really a data disk */
-#endif /* SAFE_MIXED */
-#ifdef DEBUG_GTL
-			printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 3, Time:%li\n",
-				xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
-			up(&ioctl_read_sem);
-			spin_lock_irq(q->queue_lock);
-			end_request(req, 1);
-			goto request_loop;
-		}
-	}
-
- err_done:
-#if OLD_BUSY
-	busy_data=0;
-#endif /* OLD_BUSY */
-#ifdef DEBUG_GTL
-	printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 4 (error), Time:%li\n",
-		xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
-	up(&ioctl_read_sem);
-	sbp_sleep(0);    /* wait a bit, try again */
-	spin_lock_irq(q->queue_lock);
-	end_request(req, 0);
-	goto request_loop;
-}
-/*==========================================================================*/
-/*
- *  build and send the READ command.
- */
-static void sbp_read_cmd(struct request *req)
-{
-#undef OLD
-
-	int i;
-	int block;
-
-	current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1;      /* purge buffer */
-	current_drive->sbp_current = 0;
-	block=req->sector/4;
-	if (block+current_drive->sbp_bufsiz <= current_drive->CDsize_frm)
-		current_drive->sbp_read_frames = current_drive->sbp_bufsiz;
-	else
-	{
-		current_drive->sbp_read_frames=current_drive->CDsize_frm-block;
-		/* avoid reading past end of data */
-		if (current_drive->sbp_read_frames < 1)
-		{
-			msg(DBG_INF,"requested frame %d, CD size %d ???\n",
-			    block, current_drive->CDsize_frm);
-			current_drive->sbp_read_frames=1;
-		}
-	}
-
-	flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
-	clr_cmdbuf();
-	if (famV_drive)
-	  {
-	    drvcmd[0]=CMDV_READ;
-	    lba2msf(block,&drvcmd[1]); /* msf-bcd format required */
-	    bin2bcdx(&drvcmd[1]);
-	    bin2bcdx(&drvcmd[2]);
-	    bin2bcdx(&drvcmd[3]);
-	    drvcmd[4]=current_drive->sbp_read_frames>>8;
-	    drvcmd[5]=current_drive->sbp_read_frames&0xff;
-	    drvcmd[6]=0x02; /* flag "msf-bcd" */
-	}
-	else if (fam0L_drive)
-	{
-		flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
-		if (current_drive->xa_byte==0x20)
-		{
-			cmd_type=READ_M2;
-			drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
-			drvcmd[1]=(block>>16)&0x0ff;
-			drvcmd[2]=(block>>8)&0x0ff;
-			drvcmd[3]=block&0x0ff;
-			drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
-			drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
-		}
-		else
-		{
-			drvcmd[0]=CMD0_READ; /* "read frames", old drives */
-			if (current_drive->drv_type>=drv_201)
-			{
-				lba2msf(block,&drvcmd[1]); /* msf-bcd format required */
-				bin2bcdx(&drvcmd[1]);
-				bin2bcdx(&drvcmd[2]);
-				bin2bcdx(&drvcmd[3]);
-			}
-			else
-			{
-				drvcmd[1]=(block>>16)&0x0ff;
-				drvcmd[2]=(block>>8)&0x0ff;
-				drvcmd[3]=block&0x0ff;
-			}
-			drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
-			drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
-			drvcmd[6]=(current_drive->drv_type<drv_201)?0:2; /* flag "lba or msf-bcd format" */
-		}
-	}
-	else if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READ;
-		lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-		drvcmd[5]=(current_drive->sbp_read_frames>>8)&0x0ff;
-		drvcmd[6]=current_drive->sbp_read_frames&0x0ff;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_READ;
-		lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-		drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
-		drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
-		drvcmd[6]=0x02;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_READ;
-		drvcmd[2]=(block>>24)&0x0ff;
-		drvcmd[3]=(block>>16)&0x0ff;
-		drvcmd[4]=(block>>8)&0x0ff;
-		drvcmd[5]=block&0x0ff;
-		drvcmd[7]=(current_drive->sbp_read_frames>>8)&0x0ff;
-		drvcmd[8]=current_drive->sbp_read_frames&0x0ff;
-	}
-	flags_cmd_out=f_putcmd;
-	response_count=0;
-	i=cmd_out();
-	if (i<0) msg(DBG_INF,"error giving READ command: %0d\n", i);
-	return;
-}
-/*==========================================================================*/
-/*
- *  Check the completion of the read-data command.  On success, read
- *  the current_drive->sbp_bufsiz * 2048 bytes of data from the disk into buffer.
- */
-static int sbp_data(struct request *req)
-{
-	int i=0, j=0, l, frame;
-	u_int try=0;
-	u_long timeout;
-	u_char *p;
-	u_int data_tries = 0;
-	u_int data_waits = 0;
-	u_int data_retrying = 0;
-	int error_flag;
-	int xa_count;
-	int max_latency;
-	int success;
-	int wait;
-	int duration;
-
-	error_flag=0;
-	success=0;
-#if LONG_TIMING
-	max_latency=9*HZ;
-#else
-	if (current_drive->f_multisession) max_latency=15*HZ;
-	else max_latency=5*HZ;
-#endif
-	duration=jiffies;
-	for (frame=0;frame<current_drive->sbp_read_frames&&!error_flag; frame++)
-	{
-		SBPCD_CLI;
-
-		del_timer(&data_timer);
-		data_timer.expires=jiffies+max_latency;
-		timed_out_data=0;
-		add_timer(&data_timer);
-		while (!timed_out_data)
-		{
-			if (current_drive->f_multisession) try=maxtim_data*4;
-			else try=maxtim_data;
-			msg(DBG_000,"sbp_data: CDi_status loop: try=%d.\n",try);
-			for ( ; try!=0;try--)
-			{
-				j=inb(CDi_status);
-				if (!(j&s_not_data_ready)) break;
-				if (!(j&s_not_result_ready)) break;
-				if (fam0LV_drive) if (j&s_attention) break;
-			}
-			if (!(j&s_not_data_ready)) goto data_ready;
-			if (try==0)
-			{
-				if (data_retrying == 0) data_waits++;
-				data_retrying = 1;
-				msg(DBG_000,"sbp_data: CDi_status loop: sleeping.\n");
-				sbp_sleep(1);
-				try = 1;
-			}
-		}
-		msg(DBG_INF,"sbp_data: CDi_status loop expired.\n");
-	data_ready:
-		del_timer(&data_timer);
-
-		if (timed_out_data)
-		{
-			msg(DBG_INF,"sbp_data: CDi_status timeout (timed_out_data) (%02X).\n", j);
-			error_flag++;
-		}
-		if (try==0)
-		{
-			msg(DBG_INF,"sbp_data: CDi_status timeout (try=0) (%02X).\n", j);
-			error_flag++;
-		}
-		if (!(j&s_not_result_ready))
-		{
-			msg(DBG_INF, "sbp_data: RESULT_READY where DATA_READY awaited (%02X).\n", j);
-			response_count=20;
-			j=ResponseInfo();
-			j=inb(CDi_status);
-		}
-		if (j&s_not_data_ready)
-		{
-			if ((current_drive->ored_ctl_adr&0x40)==0)
-				msg(DBG_INF, "CD contains no data tracks.\n");
-			else msg(DBG_INF, "sbp_data: DATA_READY timeout (%02X).\n", j);
-			error_flag++;
-		}
-		SBPCD_STI;
-		if (error_flag) break;
-
-		msg(DBG_000, "sbp_data: beginning to read.\n");
-		p = current_drive->sbp_buf + frame *  CD_FRAMESIZE;
-		if (sbpro_type==1) OUT(CDo_sel_i_d,1);
-		if (cmd_type==READ_M2) {
-                        if (do_16bit) insw(CDi_data, xa_head_buf, CD_XA_HEAD>>1);
-                        else insb(CDi_data, xa_head_buf, CD_XA_HEAD);
-		}
-		if (do_16bit) insw(CDi_data, p, CD_FRAMESIZE>>1);
-		else insb(CDi_data, p, CD_FRAMESIZE);
-		if (cmd_type==READ_M2) {
-                        if (do_16bit) insw(CDi_data, xa_tail_buf, CD_XA_TAIL>>1);
-                        else insb(CDi_data, xa_tail_buf, CD_XA_TAIL);
-		}
-		current_drive->sbp_current++;
-		if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-		if (cmd_type==READ_M2)
-		{
-			for (xa_count=0;xa_count<CD_XA_HEAD;xa_count++)
-				sprintf(&msgbuf[xa_count*3], " %02X", xa_head_buf[xa_count]);
-			msgbuf[xa_count*3]=0;
-			msg(DBG_XA1,"xa head:%s\n", msgbuf);
-		}
-		data_retrying = 0;
-		data_tries++;
-		if (data_tries >= 1000)
-		{
-			msg(DBG_INF,"sbp_data() statistics: %d waits in %d frames.\n", data_waits, data_tries);
-			data_waits = data_tries = 0;
-		}
-	}
-	duration=jiffies-duration;
-	msg(DBG_TEA,"time to read %d frames: %d jiffies .\n",frame,duration);
-	if (famT_drive)
-	{
-		wait=8;
-		do
-		{
-			if (teac==2)
-                          {
-                            if ((i=CDi_stat_loop_T()) == -1) break;
-                          }
-                        else
-                          {
-                            sbp_sleep(1);
-                            OUT(CDo_sel_i_d,0);
-                            i=inb(CDi_status);
-                          }
-			if (!(i&s_not_data_ready))
-			{
-				OUT(CDo_sel_i_d,1);
-				j=0;
-				do
-				{
-					if (do_16bit) i=inw(CDi_data);
-					else i=inb(CDi_data);
-					j++;
-					i=inb(CDi_status);
-				}
-				while (!(i&s_not_data_ready));
-				msg(DBG_TEA, "==========too much data (%d bytes/words)==============.\n", j);
-			}
-			if (!(i&s_not_result_ready))
-			{
-				OUT(CDo_sel_i_d,0);
-				l=0;
-				do
-				{
-					infobuf[l++]=inb(CDi_info);
-					i=inb(CDi_status);
-				}
-				while (!(i&s_not_result_ready));
-				if (infobuf[0]==0x00) success=1;
-#if 1
-				for (j=0;j<l;j++) sprintf(&msgbuf[j*3], " %02X", infobuf[j]);
-				msgbuf[j*3]=0;
-				msg(DBG_TEA,"sbp_data info response:%s\n", msgbuf);
-#endif
-				if (infobuf[0]==0x02)
-				{
-					error_flag++;
-					do
-					{
-						++recursion;
-						if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (sbp_data): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n",recursion);
-						else msg(DBG_TEA,"sbp_data: CMDT_READ_ERR necessary.\n");
-						clr_cmdbuf();
-						drvcmd[0]=CMDT_READ_ERR;
-						j=cmd_out_T(); /* !!! recursive here !!! */
-						--recursion;
-						sbp_sleep(1);
-					}
-					while (j<0);
-					current_drive->error_state=infobuf[2];
-					current_drive->b3=infobuf[3];
-					current_drive->b4=infobuf[4];
-				}
-				break;
-			}
-			else
-			{
-#if 0
-				msg(DBG_TEA, "============= waiting for result=================.\n");
-				sbp_sleep(1);
-#endif
-			}
-		}
-		while (wait--);
-	}
-
-	if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
-	{
-		msg(DBG_TEA, "================error flag: %d=================.\n", error_flag);
-		msg(DBG_INF,"sbp_data: read aborted by drive.\n");
-#if 1
-		i=cc_DriveReset(); /* ugly fix to prevent a hang */
-#else
-		i=cc_ReadError();
-#endif
-		return (0);
-	}
-	
-	if (fam0LV_drive)
-	{
-		SBPCD_CLI;
-		i=maxtim_data;
-		for (timeout=jiffies+HZ; time_before(jiffies, timeout); timeout--)
-		{
-			for ( ;i!=0;i--)
-			{
-				j=inb(CDi_status);
-				if (!(j&s_not_data_ready)) break;
-				if (!(j&s_not_result_ready)) break;
-				if (j&s_attention) break;
-			}
-			if (i != 0 || time_after_eq(jiffies, timeout)) break;
-			sbp_sleep(0);
-			i = 1;
-		}
-		if (i==0) msg(DBG_INF,"status timeout after READ.\n");
-		if (!(j&s_attention))
-		{
-			msg(DBG_INF,"sbp_data: timeout waiting DRV_ATTN - retrying.\n");
-			i=cc_DriveReset();  /* ugly fix to prevent a hang */
-			SBPCD_STI;
-			return (0);
-		}
-		SBPCD_STI;
-	}
-
-#if 0
-	if (!success)
-#endif
-		do
-		{
-			if (fam0LV_drive) cc_ReadStatus();
-#if 1
-			if (famT_drive) msg(DBG_TEA, "================before ResponseStatus=================.\n", i);
-#endif
-			i=ResponseStatus();  /* builds status_bits, returns orig. status (old) or faked p_success (new) */
-#if 1
-			if (famT_drive)	msg(DBG_TEA, "================ResponseStatus: %d=================.\n", i);
-#endif
-			if (i<0)
-			{
-				msg(DBG_INF,"bad cc_ReadStatus after read: %02X\n", current_drive->status_bits);
-				return (0);
-			}
-		}
-		while ((fam0LV_drive)&&(!st_check)&&(!(i&p_success)));
-	if (st_check)
-	{
-		i=cc_ReadError();
-		msg(DBG_INF,"cc_ReadError was necessary after read: %d\n",i);
-		return (0);
-	}
-	if (fatal_err)
-	{
-		fatal_err=0;
-		current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1;      /* purge buffer */
-		current_drive->sbp_current = 0;
-		msg(DBG_INF,"sbp_data: fatal_err - retrying.\n");
-		return (0);
-	}
-	
-	current_drive->sbp_first_frame = req -> sector / 4;
-	current_drive->sbp_last_frame = current_drive->sbp_first_frame + current_drive->sbp_read_frames - 1;
-	sbp_transfer(req);
-	return (1);
-}
-/*==========================================================================*/
-
-static int sbpcd_block_open(struct inode *inode, struct file *file)
-{
-	struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_open(p->sbpcd_infop, inode, file);
-}
-
-static int sbpcd_block_release(struct inode *inode, struct file *file)
-{
-	struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_release(p->sbpcd_infop, file);
-}
-
-static int sbpcd_block_ioctl(struct inode *inode, struct file *file,
-				unsigned cmd, unsigned long arg)
-{
-	struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
-	struct cdrom_device_info *cdi = p->sbpcd_infop;
-	int ret, i;
-
-	ret = cdrom_ioctl(file, p->sbpcd_infop, inode, cmd, arg);
-	if (ret != -ENOSYS)
-		return ret;
-
-	msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08lX)\n", cdi->name, cmd, arg);
-	if (p->drv_id==-1) {
-		msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name);
-		return (-ENXIO);             /* no such drive */
-	}
-	down(&ioctl_read_sem);
-	if (p != current_drive)
-		switch_drive(p);
-	
-	msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd);
-	switch (cmd) 		/* Sun-compatible */
-	{
-	case DDIOCSDBG:		/* DDI Debug */
-		if (!capable(CAP_SYS_ADMIN)) RETURN_UP(-EPERM);
-		i=sbpcd_dbg_ioctl(arg,1);
-		RETURN_UP(i);
-	case CDROMRESET:      /* hard reset the drive */
-		msg(DBG_IOC,"ioctl: CDROMRESET entered.\n");
-		i=DriveReset();
-		current_drive->audio_state=0;
-		RETURN_UP(i);
-
-	case CDROMREADMODE1:
-		msg(DBG_IOC,"ioctl: CDROMREADMODE1 requested.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		cc_ModeSelect(CD_FRAMESIZE);
-		cc_ModeSense();
-		current_drive->mode=READ_M1;
-		RETURN_UP(0);
-
-	case CDROMREADMODE2: /* not usable at the moment */
-		msg(DBG_IOC,"ioctl: CDROMREADMODE2 requested.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		cc_ModeSelect(CD_FRAMESIZE_RAW1);
-		cc_ModeSense();
-		current_drive->mode=READ_M2;
-		RETURN_UP(0);
-
-	case CDROMAUDIOBUFSIZ: /* configure the audio buffer size */
-		msg(DBG_IOC,"ioctl: CDROMAUDIOBUFSIZ entered.\n");
-		if (current_drive->sbp_audsiz>0)
-			vfree(current_drive->aud_buf);
-		current_drive->aud_buf=NULL;
-		current_drive->sbp_audsiz=arg;
-
-		if (current_drive->sbp_audsiz>16)
-		{
-			current_drive->sbp_audsiz = 0;
-			RETURN_UP(current_drive->sbp_audsiz);
-		}
-	
-		if (current_drive->sbp_audsiz>0)
-		{
-			current_drive->aud_buf=(u_char *) vmalloc(current_drive->sbp_audsiz*CD_FRAMESIZE_RAW);
-			if (current_drive->aud_buf==NULL)
-			{
-				msg(DBG_INF,"audio buffer (%d frames) not available.\n",current_drive->sbp_audsiz);
-				current_drive->sbp_audsiz=0;
-			}
-			else msg(DBG_INF,"audio buffer size: %d frames.\n",current_drive->sbp_audsiz);
-		}
-		RETURN_UP(current_drive->sbp_audsiz);
-
-	case CDROMREADAUDIO:
-	{ /* start of CDROMREADAUDIO */
-		int i=0, j=0, frame, block=0;
-		u_int try=0;
-		u_long timeout;
-		u_char *p;
-		u_int data_tries = 0;
-		u_int data_waits = 0;
-		u_int data_retrying = 0;
-		int status_tries;
-		int error_flag;
-
-		msg(DBG_IOC,"ioctl: CDROMREADAUDIO entered.\n");
-		if (fam0_drive) RETURN_UP(-EINVAL);
-		if (famL_drive) RETURN_UP(-EINVAL);
-		if (famV_drive) RETURN_UP(-EINVAL);
-		if (famT_drive) RETURN_UP(-EINVAL);
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		if (current_drive->aud_buf==NULL) RETURN_UP(-EINVAL);
-		if (copy_from_user(&read_audio, (void __user *)arg,
-				   sizeof(struct cdrom_read_audio)))
-			RETURN_UP(-EFAULT);
-		if (read_audio.nframes < 0 || read_audio.nframes>current_drive->sbp_audsiz) RETURN_UP(-EINVAL);
-		if (!access_ok(VERIFY_WRITE, read_audio.buf,
-			      read_audio.nframes*CD_FRAMESIZE_RAW))
-                	RETURN_UP(-EFAULT);
-
-		if (read_audio.addr_format==CDROM_MSF) /* MSF-bin specification of where to start */
-			block=msf2lba(&read_audio.addr.msf.minute);
-		else if (read_audio.addr_format==CDROM_LBA) /* lba specification of where to start */
-			block=read_audio.addr.lba;
-		else RETURN_UP(-EINVAL);
-#if 000
-		i=cc_SetSpeed(speed_150,0,0);
-		if (i) msg(DBG_AUD,"read_audio: SetSpeed error %d\n", i);
-#endif
-		msg(DBG_AUD,"read_audio: lba: %d, msf: %06X\n",
-		    block, blk2msf(block));
-		msg(DBG_AUD,"read_audio: before cc_ReadStatus.\n");
-#if OLD_BUSY
-		while (busy_data) sbp_sleep(HZ/10); /* wait a bit */
-		busy_audio=1;
-#endif /* OLD_BUSY */
-		error_flag=0;
-		for (data_tries=5; data_tries>0; data_tries--)
-		{
-			msg(DBG_AUD,"data_tries=%d ...\n", data_tries);
-			current_drive->mode=READ_AU;
-			cc_ModeSelect(CD_FRAMESIZE_RAW);
-			cc_ModeSense();
-			for (status_tries=3; status_tries > 0; status_tries--)
-			{
-				flags_cmd_out |= f_respo3;
-				cc_ReadStatus();
-				if (sbp_status() != 0) break;
-				if (st_check) cc_ReadError();
-				sbp_sleep(1);    /* wait a bit, try again */
-			}
-			if (status_tries == 0)
-			{
-				msg(DBG_AUD,"read_audio: sbp_status: failed after 3 tries in line %d.\n", __LINE__);
-				continue;
-			}
-			msg(DBG_AUD,"read_audio: sbp_status: ok.\n");
-
-			flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
-			if (fam0L_drive)
-			{
-				flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
-				cmd_type=READ_M2;
-				drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
-				drvcmd[1]=(block>>16)&0x000000ff;
-				drvcmd[2]=(block>>8)&0x000000ff;
-				drvcmd[3]=block&0x000000ff;
-				drvcmd[4]=0;
-				drvcmd[5]=read_audio.nframes; /* # of frames */
-				drvcmd[6]=0;
-			}
-			else if (fam1_drive)
-			{
-				drvcmd[0]=CMD1_READ; /* "read frames", new drives */
-				lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-				drvcmd[4]=0;
-				drvcmd[5]=0;
-				drvcmd[6]=read_audio.nframes; /* # of frames */
-			}
-			else if (fam2_drive)
-			{
-				drvcmd[0]=CMD2_READ_XA2;
-				lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-				drvcmd[4]=0;
-				drvcmd[5]=read_audio.nframes; /* # of frames */
-				drvcmd[6]=0x11; /* raw mode */
-			}
-			else if (famT_drive) /* CD-55A: not tested yet */
-			{
-			}
-			msg(DBG_AUD,"read_audio: before giving \"read\" command.\n");
-			flags_cmd_out=f_putcmd;
-			response_count=0;
-			i=cmd_out();
-			if (i<0) msg(DBG_INF,"error giving READ AUDIO command: %0d\n", i);
-			sbp_sleep(0);
-			msg(DBG_AUD,"read_audio: after giving \"read\" command.\n");
-			for (frame=1;frame<2 && !error_flag; frame++)
-			{
-				try=maxtim_data;
-				for (timeout=jiffies+9*HZ; ; )
-				{
-					for ( ; try!=0;try--)
-					{
-						j=inb(CDi_status);
-						if (!(j&s_not_data_ready)) break;
-						if (!(j&s_not_result_ready)) break;
-						if (fam0L_drive) if (j&s_attention) break;
-					}
-					if (try != 0 || time_after_eq(jiffies, timeout)) break;
-					if (data_retrying == 0) data_waits++;
-					data_retrying = 1;
-					sbp_sleep(1);
-					try = 1;
-				}
-				if (try==0)
-				{
-					msg(DBG_INF,"read_audio: sbp_data: CDi_status timeout.\n");
-					error_flag++;
-					break;
-				}
-				msg(DBG_AUD,"read_audio: sbp_data: CDi_status ok.\n");
-				if (j&s_not_data_ready)
-				{
-					msg(DBG_INF, "read_audio: sbp_data: DATA_READY timeout.\n");
-					error_flag++;
-					break;
-				}
-				msg(DBG_AUD,"read_audio: before reading data.\n");
-				error_flag=0;
-				p = current_drive->aud_buf;
-				if (sbpro_type==1) OUT(CDo_sel_i_d,1);
-				if (do_16bit)
-				{
-					u_short *p2 = (u_short *) p;
-
-					for (; (u_char *) p2 < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;)
-				  	{
-						if ((inb_p(CDi_status)&s_not_data_ready)) continue;
-
-						/* get one sample */
-						*p2++ = inw_p(CDi_data);
-						*p2++ = inw_p(CDi_data);
-					}
-				} else {
-					for (; p < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;)
-				  	{
-						if ((inb_p(CDi_status)&s_not_data_ready)) continue;
-
-						/* get one sample */
-						*p++ = inb_p(CDi_data);
-						*p++ = inb_p(CDi_data);
-						*p++ = inb_p(CDi_data);
-						*p++ = inb_p(CDi_data);
-					}
-				}
-				if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-				data_retrying = 0;
-			}
-			msg(DBG_AUD,"read_audio: after reading data.\n");
-			if (error_flag)    /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
-			{
-				msg(DBG_AUD,"read_audio: read aborted by drive\n");
-#if 0000
-				i=cc_DriveReset();                /* ugly fix to prevent a hang */
-#else
-				i=cc_ReadError();
-#endif
-				continue;
-			}
-			if (fam0L_drive)
-			{
-				i=maxtim_data;
-				for (timeout=jiffies+9*HZ; time_before(jiffies, timeout); timeout--)
-				{
-					for ( ;i!=0;i--)
-					{
-						j=inb(CDi_status);
-						if (!(j&s_not_data_ready)) break;
-						if (!(j&s_not_result_ready)) break;
-						if (j&s_attention) break;
-					}
-					if (i != 0 || time_after_eq(jiffies, timeout)) break;
-					sbp_sleep(0);
-					i = 1;
-				}
-				if (i==0) msg(DBG_AUD,"read_audio: STATUS TIMEOUT AFTER READ");
-				if (!(j&s_attention))
-				{
-					msg(DBG_AUD,"read_audio: sbp_data: timeout waiting DRV_ATTN - retrying\n");
-					i=cc_DriveReset();  /* ugly fix to prevent a hang */
-					continue;
-				}
-			}
-			do
-			{
-				if (fam0L_drive) cc_ReadStatus();
-				i=ResponseStatus();  /* builds status_bits, returns orig. status (old) or faked p_success (new) */
-				if (i<0) { msg(DBG_AUD,
-					       "read_audio: cc_ReadStatus error after read: %02X\n",
-					       current_drive->status_bits);
-					   continue; /* FIXME */
-				   }
-			}
-			while ((fam0L_drive)&&(!st_check)&&(!(i&p_success)));
-			if (st_check)
-			{
-				i=cc_ReadError();
-				msg(DBG_AUD,"read_audio: cc_ReadError was necessary after read: %02X\n",i);
-				continue;
-			}
-			if (copy_to_user(read_audio.buf,
-					 current_drive->aud_buf,
-					 read_audio.nframes * CD_FRAMESIZE_RAW))
-				RETURN_UP(-EFAULT);
-			msg(DBG_AUD,"read_audio: copy_to_user done.\n");
-			break;
-		}
-		cc_ModeSelect(CD_FRAMESIZE);
-		cc_ModeSense();
-		current_drive->mode=READ_M1;
-#if OLD_BUSY
-		busy_audio=0;
-#endif /* OLD_BUSY */
-		if (data_tries == 0)
-		{
-			msg(DBG_AUD,"read_audio: failed after 5 tries in line %d.\n", __LINE__);
-			RETURN_UP(-EIO);
-		}
-		msg(DBG_AUD,"read_audio: successful return.\n");
-		RETURN_UP(0);
-	} /* end of CDROMREADAUDIO */
-
-	default:
-		msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
-		RETURN_UP(-EINVAL);
-	} /* end switch(cmd) */
-}
-
-static int sbpcd_block_media_changed(struct gendisk *disk)
-{
-	struct sbpcd_drive *p = disk->private_data;
-	return cdrom_media_changed(p->sbpcd_infop);
-}
-
-static struct block_device_operations sbpcd_bdops =
-{
-	.owner		= THIS_MODULE,
-	.open		= sbpcd_block_open,
-	.release	= sbpcd_block_release,
-	.ioctl		= sbpcd_block_ioctl,
-	.media_changed	= sbpcd_block_media_changed,
-};
-/*==========================================================================*/
-/*
- *  Open the device special file.  Check that a disk is in. Read TOC.
- */
-static int sbpcd_open(struct cdrom_device_info *cdi, int purpose)
-{
-	struct sbpcd_drive *p = cdi->handle;
-
-	down(&ioctl_read_sem);
-	switch_drive(p);
-
-	/*
-	 * try to keep an "open" counter here and lock the door if 0->1.
-	 */
-	msg(DBG_LCK,"open_count: %d -> %d\n",
-	    current_drive->open_count,current_drive->open_count+1);
-	if (++current_drive->open_count<=1)
-	{
-		int i;
-		i=LockDoor();
-		current_drive->open_count=1;
-		if (famT_drive)	msg(DBG_TEA,"sbpcd_open: before i=DiskInfo();.\n");
-		i=DiskInfo();
-		if (famT_drive)	msg(DBG_TEA,"sbpcd_open: after i=DiskInfo();.\n");
-		if ((current_drive->ored_ctl_adr&0x40)==0)
-		{		
-			msg(DBG_INF,"CD contains no data tracks.\n");
-#ifdef SAFE_MIXED
-			current_drive->has_data=0;
-#endif /* SAFE_MIXED */
-		}
-#ifdef SAFE_MIXED
-		else if (current_drive->has_data<1) current_drive->has_data=1;
-#endif /* SAFE_MIXED */ 
-	}
-	if (!st_spinning) cc_SpinUp();
-	RETURN_UP(0);
-}
-/*==========================================================================*/
-/*
- *  On close, we flush all sbp blocks from the buffer cache.
- */
-static void sbpcd_release(struct cdrom_device_info * cdi)
-{
-	struct sbpcd_drive *p = cdi->handle;
-
-	if (p->drv_id==-1) {
-		msg(DBG_INF, "release: bad device: %s\n", cdi->name);
-		return;
-	}
-	down(&ioctl_read_sem);
-	switch_drive(p);
-	/*
-	 * try to keep an "open" counter here and unlock the door if 1->0.
-	 */
-	msg(DBG_LCK,"open_count: %d -> %d\n",
-	    p->open_count,p->open_count-1);
-	if (p->open_count>-2) /* CDROMEJECT may have been done */
-	{
-		if (--p->open_count<=0) 
-		{
-			p->sbp_first_frame=p->sbp_last_frame=-1;
-			if (p->audio_state!=audio_playing)
-				if (p->f_eject) cc_SpinDown();
-			p->diskstate_flags &= ~cd_size_bit;
-			p->open_count=0; 
-#ifdef SAFE_MIXED
-			p->has_data=0;
-#endif /* SAFE_MIXED */ 
-		}
-	}
-	up(&ioctl_read_sem);
-	return ;
-}
-/*==========================================================================*/
-/*
- *
- */
-static int sbpcd_media_changed( struct cdrom_device_info *cdi, int disc_nr);
-static struct cdrom_device_ops sbpcd_dops = {
-	.open			= sbpcd_open,
-	.release		= sbpcd_release,
-	.drive_status		= sbpcd_drive_status,
-	.media_changed		= sbpcd_media_changed,
-	.tray_move		= sbpcd_tray_move,
-	.lock_door		= sbpcd_lock_door,
-	.select_speed		= sbpcd_select_speed,
-	.get_last_session	= sbpcd_get_last_session,
-	.get_mcn		= sbpcd_get_mcn,
-	.reset			= sbpcd_reset,
-	.audio_ioctl		= sbpcd_audio_ioctl,
-	.capability		= CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
-				CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
-				CDC_MCN | CDC_PLAY_AUDIO,
-	.n_minors		= 1,
-};
-
-/*==========================================================================*/
-/*
- * accept "kernel command line" parameters 
- * (suggested by Peter MacDonald with SLS 1.03)
- *
- * This is only implemented for the first controller. Should be enough to
- * allow installing with a "strange" distribution kernel.
- *
- * use: tell LILO:
- *                 sbpcd=0x230,SoundBlaster
- *             or
- *                 sbpcd=0x300,LaserMate
- *             or
- *                 sbpcd=0x338,SoundScape
- *             or
- *                 sbpcd=0x2C0,Teac16bit
- *
- * (upper/lower case sensitive here - but all-lowercase is ok!!!).
- *
- * the address value has to be the CDROM PORT ADDRESS -
- * not the soundcard base address.
- * For the SPEA/SoundScape setup, DO NOT specify the "configuration port"
- * address, but the address which is really used for the CDROM (usually 8
- * bytes above).
- *
- */
-
-int sbpcd_setup(char *s)
-{
-#ifndef MODULE
-	int p[4];
-	(void)get_options(s, ARRAY_SIZE(p), p);
-	setup_done++;
-	msg(DBG_INI,"sbpcd_setup called with %04X,%s\n",p[1], s);
-	sbpro_type=0; /* default: "LaserMate" */
-	if (p[0]>1) sbpro_type=p[2];
-	else if (!strcmp(s,str_sb)) sbpro_type=1;
-	else if (!strcmp(s,str_sb_l)) sbpro_type=1;
-	else if (!strcmp(s,str_sp)) sbpro_type=2;
-	else if (!strcmp(s,str_sp_l)) sbpro_type=2;
-	else if (!strcmp(s,str_ss)) sbpro_type=2;
-	else if (!strcmp(s,str_ss_l)) sbpro_type=2;
-	else if (!strcmp(s,str_t16)) sbpro_type=3;
-	else if (!strcmp(s,str_t16_l)) sbpro_type=3;
-	if (p[0]>0) sbpcd_ioaddr=p[1];
-	if (p[0]>2) max_drives=p[3];
-#else
-	sbpcd_ioaddr = sbpcd[0];
-	sbpro_type = sbpcd[1];
-#endif
-	
-	CDo_command=sbpcd_ioaddr;
-	CDi_info=sbpcd_ioaddr;
-	CDi_status=sbpcd_ioaddr+1;
-	CDo_sel_i_d=sbpcd_ioaddr+1;
-	CDo_reset=sbpcd_ioaddr+2;
-	CDo_enable=sbpcd_ioaddr+3; 
-	f_16bit=0;
-	if ((sbpro_type==1)||(sbpro_type==3))
-	{
-		CDi_data=sbpcd_ioaddr;
-		if (sbpro_type==3)
-                {
-                        f_16bit=1;
-                        sbpro_type=1;
-                }
-	}
-	else CDi_data=sbpcd_ioaddr+2;
-
-	return 1;
-}
-
-__setup("sbpcd=", sbpcd_setup);
-
-
-/*==========================================================================*/
-/*
- * Sequoia S-1000 CD-ROM Interface Configuration
- * as used within SPEA Media FX, Ensonic SoundScape and some Reveal cards
- * The soundcard has to get jumpered for the interface type "Panasonic"
- * (not Sony or Mitsumi) and to get soft-configured for
- *     -> configuration port address
- *     -> CDROM port offset (num_ports): has to be 8 here. Possibly this
- *        offset value determines the interface type (none, Panasonic,
- *        Mitsumi, Sony).
- *        The interface uses a configuration port (0x320, 0x330, 0x340, 0x350)
- *        some bytes below the real CDROM address.
- *         
- *        For the Panasonic style (LaserMate) interface and the configuration
- *        port 0x330, we have to use an offset of 8; so, the real CDROM port
- *        address is 0x338.
- */
-static int __init config_spea(void)
-{
-	/*
-         * base address offset between configuration port and CDROM port,
-	 * this probably defines the interface type
-         *   2 (type=??): 0x00
-         *   8 (type=LaserMate):0x10
-         *  16 (type=??):0x20
-         *  32 (type=??):0x30
-         */
-	int n_ports=0x10;
-
-	int irq_number=0; /* off:0x00, 2/9:0x01, 7:0x03, 12:0x05, 15:0x07 */
-	int dma_channel=0; /* off: 0x00, 0:0x08, 1:0x18, 3:0x38, 5:0x58, 6:0x68 */
-	int dack_polarity=0; /* L:0x00, H:0x80 */
-	int drq_polarity=0x40; /* L:0x00, H:0x40 */
-	int i;
-
-#define SPEA_REG_1 sbpcd_ioaddr-0x08+4
-#define SPEA_REG_2 sbpcd_ioaddr-0x08+5
-	
-	OUT(SPEA_REG_1,0xFF);
-	i=inb(SPEA_REG_1);
-	if (i!=0x0F)
-	{
-		msg(DBG_SEQ,"no SPEA interface at %04X present.\n", sbpcd_ioaddr);
-		return (-1); /* no interface found */
-	}
-	OUT(SPEA_REG_1,0x04);
-	OUT(SPEA_REG_2,0xC0);
-	
-	OUT(SPEA_REG_1,0x05);
-	OUT(SPEA_REG_2,0x10|drq_polarity|dack_polarity);
-	
-#if 1
-#define SPEA_PATTERN 0x80
-#else
-#define SPEA_PATTERN 0x00
-#endif
-	OUT(SPEA_REG_1,0x06);
-	OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
-	OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
-	
-	OUT(SPEA_REG_1,0x09);
-	i=(inb(SPEA_REG_2)&0xCF)|n_ports;
-	OUT(SPEA_REG_2,i);
-	
-	sbpro_type = 0; /* acts like a LaserMate interface now */
-	msg(DBG_SEQ,"found SoundScape interface at %04X.\n", sbpcd_ioaddr);
-	return (0);
-}
-
-/*==========================================================================*/
-/*
- *  Test for presence of drive and initialize it.
- *  Called once at boot or load time.
- */
-
-/* FIXME: cleanups after failed allocations are too ugly for words */
-#ifdef MODULE
-int __init __sbpcd_init(void)
-#else
-int __init sbpcd_init(void)
-#endif
-{
-	int i=0, j=0;
-	int addr[2]={1, CDROM_PORT};
-	int port_index;
-
-	sti();
-	
-	msg(DBG_INF,"sbpcd.c %s\n", VERSION);
-#ifndef MODULE
-#if DISTRIBUTION
-	if (!setup_done)
-	{
-		msg(DBG_INF,"Looking for Matsushita/Panasonic, CreativeLabs, Longshine, TEAC CD-ROM drives\n");
-		msg(DBG_INF,"= = = = = = = = = = W A R N I N G = = = = = = = = = =\n");
-		msg(DBG_INF,"Auto-Probing can cause a hang (f.e. touching an NE2000 card).\n");
-		msg(DBG_INF,"If that happens, you have to reboot and use the\n");
-		msg(DBG_INF,"LILO (kernel) command line feature like:\n");
-		msg(DBG_INF,"   LILO boot: ... sbpcd=0x230,SoundBlaster\n");
-		msg(DBG_INF,"or like:\n");
-		msg(DBG_INF,"   LILO boot: ... sbpcd=0x300,LaserMate\n");
-		msg(DBG_INF,"or like:\n");
-		msg(DBG_INF,"   LILO boot: ... sbpcd=0x338,SoundScape\n");
-		msg(DBG_INF,"with your REAL address.\n");
-		msg(DBG_INF,"= = = = = = = = = = END of WARNING = = = = = == = = =\n");
-	}
-#endif /* DISTRIBUTION */
-	sbpcd[0]=sbpcd_ioaddr; /* possibly changed by kernel command line */
-	sbpcd[1]=sbpro_type; /* possibly changed by kernel command line */
-#endif /* MODULE */
-	
-	for (port_index=0;port_index<NUM_PROBE;port_index+=2)
-	{
-		addr[1]=sbpcd[port_index];
-		if (addr[1]==0) break;
-		if (check_region(addr[1],4))
-		{
-			msg(DBG_INF,"check_region: %03X is not free.\n",addr[1]);
-			continue;
-		}
-		if (sbpcd[port_index+1]==2) type=str_sp;
-		else if (sbpcd[port_index+1]==1) type=str_sb;
-		else if (sbpcd[port_index+1]==3) type=str_t16;
-		else type=str_lm;
-		sbpcd_setup((char *)type);
-#if DISTRIBUTION
-		msg(DBG_INF,"Scanning 0x%X (%s)...\n", CDo_command, type);
-#endif /* DISTRIBUTION */
-		if (sbpcd[port_index+1]==2)
-		{
-			i=config_spea();
-			if (i<0) continue;
-		}
-#ifdef PATH_CHECK
-		if (check_card(addr[1])) continue;
-#endif /* PATH_CHECK */ 
-		i=check_drives();
-		msg(DBG_INI,"check_drives done.\n");
-		if (i>=0) break; /* drive found */
-	} /* end of cycling through the set of possible I/O port addresses */
-	
-	if (ndrives==0)
-	{
-		msg(DBG_INF, "No drive found.\n");
-#ifdef MODULE
-		return -EIO;
-#else
-		goto init_done;
-#endif /* MODULE */
-	}
-	
-	if (port_index>0)
-          {
-            msg(DBG_INF, "You should read Documentation/cdrom/sbpcd\n");
-            msg(DBG_INF, "and then configure sbpcd.h for your hardware.\n");
-          }
-	check_datarate();
-	msg(DBG_INI,"check_datarate done.\n");
-	
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		struct sbpcd_drive *p = D_S + j;
-		if (p->drv_id==-1)
-			continue;
-		switch_drive(p);
-#if 1
-		if (!famL_drive) cc_DriveReset();
-#endif
-		if (!st_spinning) cc_SpinUp();
-		p->sbp_first_frame = -1;  /* First frame in buffer */
-		p->sbp_last_frame = -1;   /* Last frame in buffer  */
-		p->sbp_read_frames = 0;   /* Number of frames being read to buffer */
-		p->sbp_current = 0;       /* Frame being currently read */
-		p->CD_changed=1;
-		p->frame_size=CD_FRAMESIZE;
-		p->f_eject=0;
-#if EJECT
-		if (!fam0_drive) p->f_eject=1;
-#endif /* EJECT */ 
-		cc_ReadStatus();
-		i=ResponseStatus();  /* returns orig. status or p_busy_new */
-		if (famT_drive) i=ResponseStatus();  /* returns orig. status or p_busy_new */
-		if (i<0)
-		{
-			if (i!=-402)
-				msg(DBG_INF,"init: ResponseStatus returns %d.\n",i);
-		}
-		else
-		{
-			if (st_check)
-			{
-				i=cc_ReadError();
-				msg(DBG_INI,"init: cc_ReadError returns %d\n",i);
-			}
-		}
-		msg(DBG_INI,"init: first GetStatus: %d\n",i);
-		msg(DBG_LCS,"init: first GetStatus: error_byte=%d\n",
-		    p->error_byte);
-		if (p->error_byte==aud_12)
-		{
-			timeout=jiffies+2*HZ;
-			do
-			{
-				i=GetStatus();
-				msg(DBG_INI,"init: second GetStatus: %02X\n",i);
-				msg(DBG_LCS,
-				    "init: second GetStatus: error_byte=%d\n",
-				    p->error_byte);
-				if (i<0) break;
-				if (!st_caddy_in) break;
-				}
-			while ((!st_diskok)||time_after(jiffies, timeout));
-		}
-		i=SetSpeed();
-		if (i>=0) p->CD_changed=1;
-	}
-
-	if (!request_region(CDo_command,4,major_name))
-	{
-		printk(KERN_WARNING "sbpcd: Unable to request region 0x%x\n", CDo_command);
-		return -EIO;
-	}
-
-	/*
-	 * Turn on the CD audio channels.
-	 * The addresses are obtained from SOUND_BASE (see sbpcd.h).
-	 */
-#if SOUND_BASE
-	OUT(MIXER_addr,MIXER_CD_Volume); /* select SB Pro mixer register */
-	OUT(MIXER_data,0xCC); /* one nibble per channel, max. value: 0xFF */
-#endif /* SOUND_BASE */
-
-	if (register_blkdev(MAJOR_NR, major_name)) {
-#ifdef MODULE
-		return -EIO;
-#else
-		goto init_done;
-#endif /* MODULE */
-	}
-
-	/*
-	 * init error handling is broken beyond belief in this driver...
-	 */
-	sbpcd_queue = blk_init_queue(do_sbpcd_request, &sbpcd_lock);
-	if (!sbpcd_queue) {
-		release_region(CDo_command,4);
-		unregister_blkdev(MAJOR_NR, major_name);
-		return -ENOMEM;
-	}
-
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		struct cdrom_device_info * sbpcd_infop;
-		struct gendisk *disk;
-		struct sbpcd_drive *p = D_S + j;
-
-		if (p->drv_id==-1) continue;
-		switch_drive(p);
-#ifdef SAFE_MIXED
-		p->has_data=0;
-#endif /* SAFE_MIXED */ 
-		/*
-		 * allocate memory for the frame buffers
-		 */
-		p->aud_buf=NULL;
-		p->sbp_audsiz=0;
-		p->sbp_bufsiz=buffers;
-		if (p->drv_type&drv_fam1)
-			if (READ_AUDIO>0)
-				p->sbp_audsiz = READ_AUDIO;
-		p->sbp_buf=(u_char *) vmalloc(buffers*CD_FRAMESIZE);
-		if (!p->sbp_buf) {
-			msg(DBG_INF,"data buffer (%d frames) not available.\n",
-				buffers);
-			if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL))
-			{
-				printk("Can't unregister %s\n", major_name);
-			}
-			release_region(CDo_command,4);
-			blk_cleanup_queue(sbpcd_queue);
-			return -EIO;
-		}
-#ifdef MODULE
-		msg(DBG_INF,"data buffer size: %d frames.\n",buffers);
-#endif /* MODULE */
-		if (p->sbp_audsiz>0)
-		{
-			p->aud_buf=(u_char *) vmalloc(p->sbp_audsiz*CD_FRAMESIZE_RAW);
-			if (p->aud_buf==NULL) msg(DBG_INF,"audio buffer (%d frames) not available.\n",p->sbp_audsiz);
-			else msg(DBG_INF,"audio buffer size: %d frames.\n",p->sbp_audsiz);
-		}
-                sbpcd_infop = vmalloc(sizeof (struct cdrom_device_info));
-		if (sbpcd_infop == NULL)
-		{
-                        release_region(CDo_command,4);
-			blk_cleanup_queue(sbpcd_queue);
-                        return -ENOMEM;
-		}
-		memset(sbpcd_infop, 0, sizeof(struct cdrom_device_info));
-		sbpcd_infop->ops = &sbpcd_dops;
-		sbpcd_infop->speed = 2;
-		sbpcd_infop->capacity = 1;
-		sprintf(sbpcd_infop->name, "sbpcd%d", j);
-		sbpcd_infop->handle = p;
-		p->sbpcd_infop = sbpcd_infop;
-		disk = alloc_disk(1);
-		disk->major = MAJOR_NR;
-		disk->first_minor = j;
-		disk->fops = &sbpcd_bdops;
-		strcpy(disk->disk_name, sbpcd_infop->name);
-		disk->flags = GENHD_FL_CD;
-		p->disk = disk;
-		if (register_cdrom(sbpcd_infop))
-		{
-			printk(" sbpcd: Unable to register with Uniform CD-ROm driver\n");
-		}
-		disk->private_data = p;
-		disk->queue = sbpcd_queue;
-		add_disk(disk);
-	}
-	blk_queue_hardsect_size(sbpcd_queue, CD_FRAMESIZE);
-
-#ifndef MODULE
- init_done:
-#endif
-	return 0;
-}
-/*==========================================================================*/
-#ifdef MODULE
-static void sbpcd_exit(void)
-{
-	int j;
-	
-	if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL))
-	{
-		msg(DBG_INF, "What's that: can't unregister %s.\n", major_name);
-		return;
-	}
-	release_region(CDo_command,4);
-	blk_cleanup_queue(sbpcd_queue);
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		if (D_S[j].drv_id==-1) continue;
-		del_gendisk(D_S[j].disk);
-		put_disk(D_S[j].disk);
-		vfree(D_S[j].sbp_buf);
-		if (D_S[j].sbp_audsiz>0)
-			vfree(D_S[j].aud_buf);
-		if ((unregister_cdrom(D_S[j].sbpcd_infop) == -EINVAL))
-		{
-			msg(DBG_INF, "What's that: can't unregister info %s.\n", major_name);
-			return;
-		}
-		vfree(D_S[j].sbpcd_infop);
-	}
-	msg(DBG_INF, "%s module released.\n", major_name);
-}
-
-
-module_init(__sbpcd_init) /*HACK!*/;
-module_exit(sbpcd_exit);
-
-
-#endif /* MODULE */
-static int sbpcd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	msg(DBG_CHK,"media_check (%s) called\n", cdi->name);
-	
-	if (p->CD_changed==0xFF)
-        {
-                p->CD_changed=0;
-                msg(DBG_CHK,"medium changed (drive %s)\n", cdi->name);
-		current_drive->diskstate_flags &= ~toc_bit;
-		/* we *don't* need invalidate here, it's done by caller */
-		current_drive->diskstate_flags &= ~cd_size_bit;
-#ifdef SAFE_MIXED
-		current_drive->has_data=0;
-#endif /* SAFE_MIXED */ 
-
-                return (1);
-        }
-        else
-                return (0);
-}
-
-MODULE_LICENSE("GPL");
-/* FIXME: Old modules.conf claims MATSUSHITA_CDROM2_MAJOR and CDROM3, but
-   AFAICT this doesn't support those majors, so why? --RR 30 Jul 2003 */
-MODULE_ALIAS_BLOCKDEV_MAJOR(MATSUSHITA_CDROM_MAJOR);
-
-/*==========================================================================*/
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file. 
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 8
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -8
- * c-argdecl-indent: 8
- * c-label-offset: -8
- * c-continued-statement-offset: 8
- * c-continued-brace-offset: 0
- * End:
- */
-
diff --git a/drivers/cdrom/sbpcd.h b/drivers/cdrom/sbpcd.h
deleted file mode 100644
index 2f2225f13c6f..000000000000
--- a/drivers/cdrom/sbpcd.h
+++ /dev/null
@@ -1,839 +0,0 @@
-/*
- * sbpcd.h   Specify interface address and interface type here.
- */
-
-/*
- * Attention! This file contains user-serviceable parts!
- * I recommend to make use of it...
- * If you feel helpless, look into Documentation/cdrom/sbpcd
- * (good idea anyway, at least before mailing me).
- *
- * The definitions for the first controller can get overridden by
- * the kernel command line ("lilo boot option").
- * Examples:
- *                                 sbpcd=0x300,LaserMate
- *                             or
- *                                 sbpcd=0x230,SoundBlaster
- *                             or
- *                                 sbpcd=0x338,SoundScape
- *                             or
- *                                 sbpcd=0x2C0,Teac16bit
- *
- * If sbpcd gets used as a module, you can load it with
- *     insmod sbpcd.o sbpcd=0x300,0
- * or
- *     insmod sbpcd.o sbpcd=0x230,1
- * or
- *     insmod sbpcd.o sbpcd=0x338,2
- * or
- *     insmod sbpcd.o sbpcd=0x2C0,3
- * respective to override the configured address and type.
- */
-
-/*
- * define your CDROM port base address as CDROM_PORT
- * and specify the type of your interface card as SBPRO.
- *
- * address:
- * ========
- * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
- * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
- * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
- * specify the REAL address here, not the configuration port address. Look
- * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
- * sbpcd auto-probe, if you are not firm with the address.
- * There are some soundcards on the market with 0x0630, 0x0650, ...; their
- * type is not obvious (both types are possible).
- *
- * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
- *          if your soundcard has its CDROM port above 0x300, specify
- *          that address and try SBPRO 0 first.
- *          if your SoundScape configuration port is at 0x330, specify
- *          0x338 and SBPRO 2.
- *
- * interface type:
- * ===============
- * set SBPRO to 1 for "true" SoundBlaster card
- * set SBPRO to 0 for "compatible" soundcards and
- *                for "poor" (no sound) interface cards.
- * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
- * set SBPRO to 3 for Teac 16bit interface cards
- *
- * Almost all "compatible" sound boards need to set SBPRO to 0.
- * If SBPRO is set wrong, the drives will get found - but any
- * data access will give errors (audio access will work).
- * The "OmniCD" no-sound interface card from CreativeLabs and most Teac
- * interface cards need SBPRO 1.
- *
- * sound base:
- * ===========
- * The SOUND_BASE definition tells if we should try to turn the CD sound
- * channels on. It will only be of use regarding soundcards with a SbPro
- * compatible mixer.
- *
- * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
- *          #define SOUND_BASE 0     leaves the soundcard untouched
- */
-#define CDROM_PORT 0x340 /* <-----------<< port address                      */
-#define SBPRO      0     /* <-----------<< interface type                    */
-#define MAX_DRIVES 4     /* set to 1 if the card does not use "drive select" */
-#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0   */
-
-/*
- * some more or less user dependent definitions - service them!
- */
-
-/* Set this to 0 once you have configured your interface definitions right. */
-#define DISTRIBUTION 1
-
-/*
- * Time to wait after giving a message.
- * This gets important if you enable non-standard DBG_xxx flags.
- * You will see what happens if you omit the pause or make it
- * too short. Be warned!
- */
-#define KLOGD_PAUSE 1
-
-/* tray control: eject tray if no disk is in */
-#if DISTRIBUTION
-#define JUKEBOX 0
-#else
-#define JUKEBOX 1
-#endif /* DISTRIBUTION */
-
-/* tray control: eject tray after last use */
-#if DISTRIBUTION
-#define EJECT 0
-#else
-#define EJECT 1
-#endif /* DISTRIBUTION */
-
-/* max. number of audio frames to read with one     */
-/* request (allocates n* 2352 bytes kernel memory!) */
-/* may be freely adjusted, f.e. 75 (= 1 sec.), at   */
-/* runtime by use of the CDROMAUDIOBUFSIZ ioctl.    */
-#define READ_AUDIO 0
-
-/* Optimizations for the Teac CD-55A drive read performance.
- * SBP_TEAC_SPEED can be changed here, or one can set the 
- * variable "teac" when loading as a module.
- * Valid settings are:
- *   0 - very slow - the recommended "DISTRIBUTION 1" setup.
- *   1 - 2x performance with little overhead. No busy waiting.
- *   2 - 4x performance with 5ms overhead per read. Busy wait.
- *
- * Setting SBP_TEAC_SPEED or the variable 'teac' to anything
- * other than 0 may cause problems. If you run into them, first
- * change SBP_TEAC_SPEED back to 0 and see if your drive responds
- * normally. If yes, you are "allowed" to report your case - to help
- * me with the driver, not to solve your hassle. Don´t mail if you
- * simply are stuck into your own "tuning" experiments, you know?
- */
-#define SBP_TEAC_SPEED 1
-
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * nothing to change below here if you are not fully aware what you're doing
- */
-#ifndef _LINUX_SBPCD_H
-
-#define _LINUX_SBPCD_H
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * driver's own read_ahead, data mode
- */
-#define SBP_BUFFER_FRAMES 8 
-
-#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
-#undef  FUTURE
-#undef SAFE_MIXED
-
-#define TEST_UPC 0
-#define SPEA_TEST 0
-#define TEST_STI 0
-#define OLD_BUSY 0
-#undef PATH_CHECK
-#ifndef SOUND_BASE
-#define SOUND_BASE 0
-#endif
-#if DISTRIBUTION
-#undef SBP_TEAC_SPEED
-#define SBP_TEAC_SPEED 0
-#endif
-/*==========================================================================*/
-/*
- * DDI interface definitions
- * "invented" by Fred N. van Kempen..
- */
-#define DDIOCSDBG	0x9000
-
-/*==========================================================================*/
-/*
- * "private" IOCTL functions
- */
-#define CDROMAUDIOBUFSIZ	0x5382 /* set the audio buffer size */
-
-/*==========================================================================*/
-/*
- * Debug output levels
- */
-#define DBG_INF	1	/* necessary information */
-#define DBG_BSZ	2	/* BLOCK_SIZE trace */
-#define DBG_REA	3	/* READ status trace */
-#define DBG_CHK	4	/* MEDIA CHECK trace */
-#define DBG_TIM	5	/* datarate timer test */
-#define DBG_INI	6	/* initialization trace */
-#define DBG_TOC	7	/* tell TocEntry values */
-#define DBG_IOC	8	/* ioctl trace */
-#define DBG_STA	9	/* ResponseStatus() trace */
-#define DBG_ERR	10	/* cc_ReadError() trace */
-#define DBG_CMD	11	/* cmd_out() trace */
-#define DBG_WRN	12	/* give explanation before auto-probing */
-#define DBG_MUL	13	/* multi session code test */
-#define DBG_IDX	14	/* test code for drive_id !=0 */
-#define DBG_IOX	15	/* some special information */
-#define DBG_DID	16	/* drive ID test */
-#define DBG_RES	17	/* drive reset info */
-#define DBG_SPI	18	/* SpinUp test */
-#define DBG_IOS	19	/* ioctl trace: subchannel functions */
-#define DBG_IO2	20	/* ioctl trace: general */
-#define DBG_UPC	21	/* show UPC information */
-#define DBG_XA1	22	/* XA mode debugging */
-#define DBG_LCK	23	/* door (un)lock info */
-#define DBG_SQ1	24	/* dump SubQ frame */
-#define DBG_AUD	25	/* READ AUDIO debugging */
-#define DBG_SEQ	26	/* Sequoia interface configuration trace */
-#define DBG_LCS	27	/* Longshine LCS-7260 debugging trace */
-#define DBG_CD2	28	/* MKE/Funai CD200 debugging trace */
-#define DBG_TEA	29	/* TEAC CD-55A debugging trace */
-#define DBG_ECS	30	/* ECS-AT (Vertos 100) debugging trace */
-#define DBG_000	31	/* unnecessary information */
-
-/*==========================================================================*/
-/*==========================================================================*/
-
-/*
- * bits of flags_cmd_out:
- */
-#define f_respo3		0x100
-#define f_putcmd		0x80
-#define f_respo2		0x40
-#define f_lopsta		0x20
-#define f_getsta		0x10
-#define f_ResponseStatus	0x08
-#define f_obey_p_check		0x04
-#define f_bit1			0x02
-#define f_wait_if_busy		0x01
-
-/*
- * diskstate_flags:
- */
-#define x80_bit			0x80
-#define upc_bit			0x40
-#define volume_bit		0x20
-#define toc_bit			0x10
-#define multisession_bit	0x08
-#define cd_size_bit		0x04
-#define subq_bit		0x02
-#define frame_size_bit		0x01
-
-/*
- * disk states (bits of diskstate_flags):
- */
-#define upc_valid		(current_drive->diskstate_flags&upc_bit)
-#define volume_valid		(current_drive->diskstate_flags&volume_bit)
-#define toc_valid		(current_drive->diskstate_flags&toc_bit)
-#define cd_size_valid		(current_drive->diskstate_flags&cd_size_bit)
-#define subq_valid		(current_drive->diskstate_flags&subq_bit)
-#define frame_size_valid	(current_drive->diskstate_flags&frame_size_bit)
-
-/*
- * the status_bits variable
- */
-#define p_success	0x100
-#define p_door_closed	0x80
-#define p_caddy_in	0x40
-#define p_spinning	0x20
-#define p_check		0x10
-#define p_busy_new	0x08
-#define p_door_locked	0x04
-#define p_disk_ok	0x01
-
-/*
- * LCS-7260 special status result bits:
- */
-#define p_lcs_door_locked	0x02
-#define p_lcs_door_closed	0x01 /* probably disk_in */
-
-/*
- * CR-52x special status result bits:
- */
-#define p_caddin_old	0x40
-#define p_success_old	0x08
-#define p_busy_old	0x04
-#define p_bit_1		0x02	/* hopefully unused now */
-
-/*
- * "generation specific" defs of the status result bits:
- */
-#define p0_door_closed	0x80
-#define p0_caddy_in	0x40
-#define p0_spinning	0x20
-#define p0_check	0x10
-#define p0_success	0x08 /* unused */
-#define p0_busy		0x04
-#define p0_bit_1	0x02 /* unused */
-#define p0_disk_ok	0x01
-
-#define pL_disk_in	0x40
-#define pL_spinning	0x20
-#define pL_check	0x10
-#define pL_success	0x08 /* unused ?? */
-#define pL_busy		0x04
-#define pL_door_locked	0x02
-#define pL_door_closed	0x01
-
-#define pV_door_closed	0x40
-#define pV_spinning	0x20
-#define pV_check	0x10
-#define pV_success	0x08
-#define pV_busy		0x04
-#define pV_door_locked	0x02
-#define pV_disk_ok	0x01
-
-#define p1_door_closed	0x80
-#define p1_disk_in	0x40
-#define p1_spinning	0x20
-#define p1_check	0x10
-#define p1_busy		0x08
-#define p1_door_locked	0x04
-#define p1_bit_1	0x02 /* unused */
-#define p1_disk_ok	0x01
-
-#define p2_disk_ok	0x80
-#define p2_door_locked	0x40
-#define p2_spinning	0x20
-#define p2_busy2	0x10
-#define p2_busy1	0x08
-#define p2_door_closed	0x04
-#define p2_disk_in	0x02
-#define p2_check	0x01
-
-/*
- * used drive states:
- */
-#define st_door_closed	(current_drive->status_bits&p_door_closed)
-#define st_caddy_in	(current_drive->status_bits&p_caddy_in)
-#define st_spinning	(current_drive->status_bits&p_spinning)
-#define st_check	(current_drive->status_bits&p_check)
-#define st_busy		(current_drive->status_bits&p_busy_new)
-#define st_door_locked	(current_drive->status_bits&p_door_locked)
-#define st_diskok	(current_drive->status_bits&p_disk_ok)
-
-/*
- * bits of the CDi_status register:
- */
-#define s_not_result_ready	0x04 /* 0: "result ready" */
-#define s_not_data_ready	0x02 /* 0: "data ready"   */
-#define s_attention		0x01 /* 1: "attention required" */
-/*
- * usable as:
- */
-#define DRV_ATTN	((inb(CDi_status)&s_attention)!=0)
-#define DATA_READY	((inb(CDi_status)&s_not_data_ready)==0)
-#define RESULT_READY	((inb(CDi_status)&s_not_result_ready)==0)
-
-/*
- * drive families and types (firmware versions):
- */
-#define drv_fam0	0x0100		/* CR-52x family */
-#define drv_199		(drv_fam0+0x01)	/* <200 */
-#define drv_200		(drv_fam0+0x02)	/* <201 */
-#define drv_201		(drv_fam0+0x03)	/* <210 */
-#define drv_210		(drv_fam0+0x04)	/* <211 */
-#define drv_211		(drv_fam0+0x05)	/* <300 */
-#define drv_300		(drv_fam0+0x06)	/* >=300 */
-
-#define drv_fam1	0x0200		/* CR-56x family */
-#define drv_099		(drv_fam1+0x01)	/* <100 */
-#define drv_100		(drv_fam1+0x02)	/* >=100, only 1.02 and 5.00 known */
-
-#define drv_fam2	0x0400		/* CD200 family */
-
-#define drv_famT	0x0800		/* TEAC CD-55A */
-
-#define drv_famL	0x1000		/* Longshine family */
-#define drv_260		(drv_famL+0x01)	/* LCS-7260 */
-#define drv_e1		(drv_famL+0x01)	/* LCS-7260, firmware "A E1" */
-#define drv_f4		(drv_famL+0x02)	/* LCS-7260, firmware "A4F4" */
-
-#define drv_famV	0x2000		/* ECS-AT (vertos-100) family */
-#define drv_at		(drv_famV+0x01)	/* ECS-AT, firmware "1.00" */
-
-#define fam0_drive	(current_drive->drv_type&drv_fam0)
-#define famL_drive	(current_drive->drv_type&drv_famL)
-#define famV_drive	(current_drive->drv_type&drv_famV)
-#define fam1_drive	(current_drive->drv_type&drv_fam1)
-#define fam2_drive	(current_drive->drv_type&drv_fam2)
-#define famT_drive	(current_drive->drv_type&drv_famT)
-#define fam0L_drive	(current_drive->drv_type&(drv_fam0|drv_famL))
-#define fam0V_drive	(current_drive->drv_type&(drv_fam0|drv_famV))
-#define famLV_drive	(current_drive->drv_type&(drv_famL|drv_famV))
-#define fam0LV_drive	(current_drive->drv_type&(drv_fam0|drv_famL|drv_famV))
-#define fam1L_drive	(current_drive->drv_type&(drv_fam1|drv_famL))
-#define fam1V_drive	(current_drive->drv_type&(drv_fam1|drv_famV))
-#define fam1LV_drive	(current_drive->drv_type&(drv_fam1|drv_famL|drv_famV))
-#define fam01_drive	(current_drive->drv_type&(drv_fam0|drv_fam1))
-#define fam12_drive	(current_drive->drv_type&(drv_fam1|drv_fam2))
-#define fam2T_drive	(current_drive->drv_type&(drv_fam2|drv_famT))
-
-/*
- * audio states:
- */
-#define audio_completed	3 /* Forgot this one! --AJK */
-#define audio_playing	2
-#define audio_pausing	1
-
-/*
- * drv_pattern, drv_options:
- */
-#define speed_auto	0x80
-#define speed_300	0x40
-#define speed_150	0x20
-#define audio_mono	0x04
-
-/*
- * values of cmd_type (0 else):
- */
-#define READ_M1	0x01	/* "data mode 1": 2048 bytes per frame */
-#define READ_M2	0x02	/* "data mode 2": 12+2048+280 bytes per frame */
-#define READ_SC	0x04	/* "subchannel info": 96 bytes per frame */
-#define READ_AU	0x08	/* "audio frame": 2352 bytes per frame */
-
-/*
- * sense_byte:
- *
- *          values: 00
- *                  01
- *                  81
- *                  82 "raw audio" mode
- *                  xx from infobuf[0] after 85 00 00 00 00 00 00
- */
-
-/* audio status (bin) */
-#define aud_00 0x00 /* Audio status byte not supported or not valid */
-#define audx11 0x0b /* Audio play operation in progress             */
-#define audx12 0x0c /* Audio play operation paused                  */
-#define audx13 0x0d /* Audio play operation successfully completed  */
-#define audx14 0x0e /* Audio play operation stopped due to error    */
-#define audx15 0x0f /* No current audio status to return            */
-/* audio status (bcd) */
-#define aud_11 0x11 /* Audio play operation in progress             */
-#define aud_12 0x12 /* Audio play operation paused                  */
-#define aud_13 0x13 /* Audio play operation successfully completed  */
-#define aud_14 0x14 /* Audio play operation stopped due to error    */
-#define aud_15 0x15 /* No current audio status to return            */
-
-/*
- * highest allowed drive number (MINOR+1)
- */
-#define NR_SBPCD	4
-
-/*
- * we try to never disable interrupts - seems to work
- */
-#define SBPCD_DIS_IRQ	0
-
-/*
- * "write byte to port"
- */
-#define OUT(x,y)	outb(y,x)
-
-/*==========================================================================*/
-
-#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
-#define MIXER_data SOUND_BASE+5 /* sound card's data register */
-#define MIXER_CD_Volume	0x28	/* internal SB Pro register address */
-
-/*==========================================================================*/
-
-#define MAX_TRACKS	99
-
-#define ERR_DISKCHANGE 615
-
-/*==========================================================================*/
-/*
- * To make conversions easier (machine dependent!)
- */
-typedef union _msf
-{
-	u_int n;
-	u_char c[4];
-} MSF;
-
-typedef union _blk
-{
-	u_int n;
-	u_char c[4];
-} BLK;
-
-/*==========================================================================*/
-
-/*============================================================================
-==============================================================================
-
-COMMAND SET of "old" drives like CR-521, CR-522
-               (the CR-562 family is different):
-
-No.	Command			       Code
---------------------------------------------
-
-Drive Commands:
- 1	Seek				01	
- 2	Read Data			02
- 3	Read XA-Data			03
- 4	Read Header			04
- 5	Spin Up				05
- 6	Spin Down			06
- 7	Diagnostic			07
- 8	Read UPC			08
- 9	Read ISRC			09
-10	Play Audio			0A
-11	Play Audio MSF			0B
-12	Play Audio Track/Index		0C
-
-Status Commands:
-13	Read Status			81	
-14	Read Error			82
-15	Read Drive Version		83
-16	Mode Select			84
-17	Mode Sense			85
-18	Set XA Parameter		86
-19	Read XA Parameter		87
-20	Read Capacity			88
-21	Read SUB_Q			89
-22	Read Disc Code			8A
-23	Read Disc Information		8B
-24	Read TOC			8C
-25	Pause/Resume			8D
-26	Read Packet			8E
-27	Read Path Check			00
- 
- 
-all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
-
-mnemo     7-byte command        #bytes response (r0...rn)
-________ ____________________  ____ 
-
-Read Status:
-status:  81.                    (1)  one-byte command, gives the main
-                                                          status byte
-Read Error:
-check1:  82 00 00 00 00 00 00.  (6)  r1: audio status
-
-Read Packet:
-check2:  8e xx 00 00 00 00 00. (xx)  gets xx bytes response, relating
-                                        to commands 01 04 05 07 08 09
-
-Play Audio:
-play:    0a ll-bb-aa nn-nn-nn.  (0)  play audio, ll-bb-aa: starting block (lba),
-                                                 nn-nn-nn: #blocks
-Play Audio MSF:
-         0b mm-ss-ff mm-ss-ff   (0)  play audio from/to
-
-Play Audio Track/Index:
-         0c ...
-
-Pause/Resume:
-pause:   8d pr 00 00 00 00 00.  (0)  pause (pr=00) 
-                                     resume (pr=80) audio playing
-
-Mode Select:
-         84 00 nn-nn ??.?? 00   (0)  nn-nn: 2048 or 2340
-                                     possibly defines transfer size
-
-set_vol: 84 83 00 00 sw le 00.  (0)  sw(itch): lrxxxxxx (off=1)
-                                     le(vel): min=0, max=FF, else half
-				     (firmware 2.11)
-
-Mode Sense:
-get_vol: 85 03 00 00 00 00 00.  (2)  tell current audio volume setting
-
-Read Disc Information:
-tocdesc: 8b 00 00 00 00 00 00.  (6)  read the toc descriptor ("msf-bin"-format)
-
-Read TOC:
-tocent:  8c fl nn 00 00 00 00.  (8)  read toc entry #nn
-                                       (fl=0:"lba"-, =2:"msf-bin"-format)
-
-Read Capacity:
-capacit: 88 00 00 00 00 00 00.  (5)  "read CD-ROM capacity"
-
-
-Read Path Check:
-ping:    00 00 00 00 00 00 00.  (2)  r0=AA, r1=55
-                                     ("ping" if the drive is connected)
-
-Read Drive Version:
-ident:   83 00 00 00 00 00 00. (12)  gives "MATSHITAn.nn" 
-                                     (n.nn = 2.01, 2.11., 3.00, ...)
-
-Seek:
-seek:    01 00 ll-bb-aa 00 00.  (0)  
-seek:    01 02 mm-ss-ff 00 00.  (0)  
-
-Read Data:
-read:    02 xx-xx-xx nn-nn fl.  (?)  read nn-nn blocks of 2048 bytes,
-                                     starting at block xx-xx-xx  
-                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read XA-Data:
-read:    03 xx-xx-xx nn-nn fl.  (?)  read nn-nn blocks of 2340 bytes, 
-                                     starting at block xx-xx-xx
-                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read SUB_Q:
-         89 fl 00 00 00 00 00. (13)  r0: audio status, r4-r7: lba/msf, 
-                                       fl=0: "lba", fl=2: "msf"
-
-Read Disc Code:
-         8a 00 00 00 00 00 00. (14)  possibly extended "check condition"-info
-
-Read Header:
-         04 00 ll-bb-aa 00 00.  (0)   4 bytes response with "check2"
-         04 02 mm-ss-ff 00 00.  (0)   4 bytes response with "check2"
-
-Spin Up:
-         05 00 ll-bb-aa 00 00.  (0)  possibly implies a "seek"
-
-Spin Down:
-         06 ...
-
-Diagnostic:
-         07 00 ll-bb-aa 00 00.  (2)   2 bytes response with "check2"
-         07 02 mm-ss-ff 00 00.  (2)   2 bytes response with "check2"
-
-Read UPC:
-         08 00 ll-bb-aa 00 00. (16)  
-         08 02 mm-ss-ff 00 00. (16)  
-
-Read ISRC:
-         09 00 ll-bb-aa 00 00. (15)  15 bytes response with "check2"
-         09 02 mm-ss-ff 00 00. (15)  15 bytes response with "check2"
-
-Set XA Parameter:
-         86 ...
-
-Read XA Parameter:
-         87 ...
-
-==============================================================================
-============================================================================*/
-
-/*
- * commands
- *
- * CR-52x:      CMD0_
- * CR-56x:      CMD1_
- * CD200:       CMD2_
- * LCS-7260:    CMDL_
- * TEAC CD-55A: CMDT_
- * ECS-AT:      CMDV_
- */
-#define CMD1_RESET	0x0a
-#define CMD2_RESET	0x01
-#define CMDT_RESET	0xc0
-
-#define CMD1_LOCK_CTL	0x0c
-#define CMD2_LOCK_CTL	0x1e
-#define CMDT_LOCK_CTL	CMD2_LOCK_CTL
-#define CMDL_LOCK_CTL	0x0e
-#define CMDV_LOCK_CTL	CMDL_LOCK_CTL
-
-#define CMD1_TRAY_CTL	0x07
-#define CMD2_TRAY_CTL	0x1b
-#define CMDT_TRAY_CTL	CMD2_TRAY_CTL
-#define CMDL_TRAY_CTL	0x0d
-#define CMDV_TRAY_CTL	CMDL_TRAY_CTL
-
-#define CMD1_MULTISESS	0x8d
-#define CMDL_MULTISESS	0x8c
-#define CMDV_MULTISESS	CMDL_MULTISESS
-
-#define CMD1_SUBCHANINF	0x11
-#define CMD2_SUBCHANINF	0x??
-
-#define CMD1_ABORT	0x08
-#define CMD2_ABORT	0x08
-#define CMDT_ABORT	0x08
-
-#define CMD2_x02	0x02
-
-#define CMD2_SETSPEED	0xda
-
-#define CMD0_PATH_CHECK	0x00
-#define CMD1_PATH_CHECK	0x???
-#define CMD2_PATH_CHECK	0x???
-#define CMDT_PATH_CHECK	0x???
-#define CMDL_PATH_CHECK	CMD0_PATH_CHECK
-#define CMDV_PATH_CHECK	CMD0_PATH_CHECK
-
-#define CMD0_SEEK	0x01
-#define CMD1_SEEK	CMD0_SEEK
-#define CMD2_SEEK	0x2b
-#define CMDT_SEEK	CMD2_SEEK
-#define CMDL_SEEK	CMD0_SEEK
-#define CMDV_SEEK	CMD0_SEEK
-
-#define CMD0_READ	0x02
-#define CMD1_READ	0x10
-#define CMD2_READ	0x28
-#define CMDT_READ	CMD2_READ
-#define CMDL_READ	CMD0_READ
-#define CMDV_READ	CMD0_READ
-
-#define CMD0_READ_XA	0x03
-#define CMD2_READ_XA	0xd4
-#define CMD2_READ_XA2	0xd5
-#define CMDL_READ_XA	CMD0_READ_XA /* really ?? */
-#define CMDV_READ_XA	CMD0_READ_XA
-
-#define CMD0_READ_HEAD	0x04
-
-#define CMD0_SPINUP	0x05
-#define CMD1_SPINUP	0x02
-#define CMD2_SPINUP	CMD2_TRAY_CTL
-#define CMDL_SPINUP	CMD0_SPINUP
-#define CMDV_SPINUP	CMD0_SPINUP
-
-#define CMD0_SPINDOWN	0x06 /* really??? */
-#define CMD1_SPINDOWN	0x06
-#define CMD2_SPINDOWN	CMD2_TRAY_CTL
-#define CMDL_SPINDOWN	0x0d
-#define CMDV_SPINDOWN	CMD0_SPINDOWN
-
-#define CMD0_DIAG	0x07
-
-#define CMD0_READ_UPC	0x08
-#define CMD1_READ_UPC	0x88
-#define CMD2_READ_UPC	0x???
-#define CMDL_READ_UPC	CMD0_READ_UPC
-#define CMDV_READ_UPC	0x8f
-
-#define CMD0_READ_ISRC	0x09
-
-#define CMD0_PLAY	0x0a
-#define CMD1_PLAY	0x???
-#define CMD2_PLAY	0x???
-#define CMDL_PLAY	CMD0_PLAY
-#define CMDV_PLAY	CMD0_PLAY
-
-#define CMD0_PLAY_MSF	0x0b
-#define CMD1_PLAY_MSF	0x0e
-#define CMD2_PLAY_MSF	0x47
-#define CMDT_PLAY_MSF	CMD2_PLAY_MSF
-#define CMDL_PLAY_MSF	0x???
-
-#define CMD0_PLAY_TI	0x0c
-#define CMD1_PLAY_TI	0x0f
-
-#define CMD0_STATUS	0x81
-#define CMD1_STATUS	0x05
-#define CMD2_STATUS	0x00
-#define CMDT_STATUS	CMD2_STATUS
-#define CMDL_STATUS	CMD0_STATUS
-#define CMDV_STATUS	CMD0_STATUS
-#define CMD2_SEEK_LEADIN 0x00
-
-#define CMD0_READ_ERR	0x82
-#define CMD1_READ_ERR	CMD0_READ_ERR
-#define CMD2_READ_ERR	0x03
-#define CMDT_READ_ERR	CMD2_READ_ERR /* get audio status */
-#define CMDL_READ_ERR	CMD0_READ_ERR
-#define CMDV_READ_ERR	CMD0_READ_ERR
-
-#define CMD0_READ_VER	0x83
-#define CMD1_READ_VER	CMD0_READ_VER
-#define CMD2_READ_VER	0x12
-#define CMDT_READ_VER	CMD2_READ_VER /* really ?? */
-#define CMDL_READ_VER	CMD0_READ_VER
-#define CMDV_READ_VER	CMD0_READ_VER
-
-#define CMD0_SETMODE	0x84
-#define CMD1_SETMODE	0x09
-#define CMD2_SETMODE	0x55
-#define CMDT_SETMODE	CMD2_SETMODE
-#define CMDL_SETMODE	CMD0_SETMODE
-
-#define CMD0_GETMODE	0x85
-#define CMD1_GETMODE	0x84
-#define CMD2_GETMODE	0x5a
-#define CMDT_GETMODE	CMD2_GETMODE
-#define CMDL_GETMODE	CMD0_GETMODE
-
-#define CMD0_SET_XA	0x86
-
-#define CMD0_GET_XA	0x87
-
-#define CMD0_CAPACITY	0x88
-#define CMD1_CAPACITY	0x85
-#define CMD2_CAPACITY	0x25
-#define CMDL_CAPACITY	CMD0_CAPACITY /* missing in some firmware versions */
-
-#define CMD0_READSUBQ	0x89
-#define CMD1_READSUBQ	0x87
-#define CMD2_READSUBQ	0x42
-#define CMDT_READSUBQ	CMD2_READSUBQ
-#define CMDL_READSUBQ	CMD0_READSUBQ
-#define CMDV_READSUBQ	CMD0_READSUBQ
-
-#define CMD0_DISKCODE	0x8a
-
-#define CMD0_DISKINFO	0x8b
-#define CMD1_DISKINFO	CMD0_DISKINFO
-#define CMD2_DISKINFO	0x43
-#define CMDT_DISKINFO	CMD2_DISKINFO
-#define CMDL_DISKINFO	CMD0_DISKINFO
-#define CMDV_DISKINFO	CMD0_DISKINFO
-
-#define CMD0_READTOC	0x8c
-#define CMD1_READTOC	CMD0_READTOC
-#define CMD2_READTOC	0x???
-#define CMDL_READTOC	CMD0_READTOC
-#define CMDV_READTOC	CMD0_READTOC
-
-#define CMD0_PAU_RES	0x8d
-#define CMD1_PAU_RES	0x0d
-#define CMD2_PAU_RES	0x4b
-#define CMDT_PAUSE	CMD2_PAU_RES
-#define CMDL_PAU_RES	CMD0_PAU_RES
-#define CMDV_PAUSE	CMD0_PAU_RES
-
-#define CMD0_PACKET	0x8e
-#define CMD1_PACKET	CMD0_PACKET
-#define CMD2_PACKET	0x???
-#define CMDL_PACKET	CMD0_PACKET
-#define CMDV_PACKET	0x???
-
-/*==========================================================================*/
-/*==========================================================================*/
-#endif /* _LINUX_SBPCD_H */
-/*==========================================================================*/
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file. 
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 8
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -8
- * c-argdecl-indent: 8
- * c-label-offset: -8
- * c-continued-statement-offset: 8
- * c-continued-brace-offset: 0
- * End:
- */
diff --git a/drivers/cdrom/sjcd.c b/drivers/cdrom/sjcd.c
deleted file mode 100644
index 76c24e679e68..000000000000
--- a/drivers/cdrom/sjcd.c
+++ /dev/null
@@ -1,1815 +0,0 @@
-/* -- sjcd.c
- *
- *   Sanyo CD-ROM device driver implementation, Version 1.6
- *   Copyright (C) 1995  Vadim V. Model
- *
- *   model@cecmow.enet.dec.com
- *   vadim@rbrf.ru
- *   vadim@ipsun.ras.ru
- *
- *
- *  This driver is based on pre-works by Eberhard Moenkeberg (emoenke@gwdg.de);
- *  it was developed under use of mcd.c from Martin Harriss, with help of
- *  Eric van der Maarel (H.T.M.v.d.Maarel@marin.nl).
- *
- *  It is planned to include these routines into sbpcd.c later - to make
- *  a "mixed use" on one cable possible for all kinds of drives which use
- *  the SoundBlaster/Panasonic style CDROM interface. But today, the
- *  ability to install directly from CDROM is more important than flexibility.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History:
- *  1.1 First public release with kernel version 1.3.7.
- *      Written by Vadim Model.
- *  1.2 Added detection and configuration of cdrom interface
- *      on ISP16 soundcard.
- *      Allow for command line options: sjcd=<io_base>,<irq>,<dma>
- *  1.3 Some minor changes to README.sjcd.
- *  1.4 MSS Sound support!! Listen to a CD through the speakers.
- *  1.5 Module support and bugfixes.
- *      Tray locking.
- *  1.6 Removed ISP16 code from this driver.
- *      Allow only to set io base address on command line: sjcd=<io_base>
- *      Changes to Documentation/cdrom/sjcd
- *      Added cleanup after any error in the initialisation.
- *  1.7 Added code to set the sector size tables to prevent the bug present in 
- *      the previous version of this driver.  Coded added by Anthony Barbachan 
- *      from bugfix tip originally suggested by Alan Cox.
- *
- *  November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	             Removed init_module & cleanup_module in favor of 
- *	             module_init & module_exit.
- *	             Torben Mathiasen <tmm@image.dk>
- */
-
-#define SJCD_VERSION_MAJOR 1
-#define SJCD_VERSION_MINOR 7
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/major.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <linux/blkdev.h>
-#include "sjcd.h"
-
-static int sjcd_present = 0;
-static struct request_queue *sjcd_queue;
-
-#define MAJOR_NR SANYO_CDROM_MAJOR
-#define QUEUE (sjcd_queue)
-#define CURRENT elv_next_request(sjcd_queue)
-
-#define SJCD_BUF_SIZ 32		/* cdr-h94a has internal 64K buffer */
-
-/*
- * buffer for block size conversion
- */
-static char sjcd_buf[2048 * SJCD_BUF_SIZ];
-static volatile int sjcd_buf_bn[SJCD_BUF_SIZ], sjcd_next_bn;
-static volatile int sjcd_buf_in, sjcd_buf_out = -1;
-
-/*
- * Status.
- */
-static unsigned short sjcd_status_valid = 0;
-static unsigned short sjcd_door_closed;
-static unsigned short sjcd_door_was_open;
-static unsigned short sjcd_media_is_available;
-static unsigned short sjcd_media_is_changed;
-static unsigned short sjcd_toc_uptodate = 0;
-static unsigned short sjcd_command_failed;
-static volatile unsigned char sjcd_completion_status = 0;
-static volatile unsigned char sjcd_completion_error = 0;
-static unsigned short sjcd_command_is_in_progress = 0;
-static unsigned short sjcd_error_reported = 0;
-static DEFINE_SPINLOCK(sjcd_lock);
-
-static int sjcd_open_count;
-
-static int sjcd_audio_status;
-static struct sjcd_play_msf sjcd_playing;
-
-static int sjcd_base = SJCD_BASE_ADDR;
-
-module_param(sjcd_base, int, 0);
-
-static DECLARE_WAIT_QUEUE_HEAD(sjcd_waitq);
-
-/*
- * Data transfer.
- */
-static volatile unsigned short sjcd_transfer_is_active = 0;
-
-enum sjcd_transfer_state {
-	SJCD_S_IDLE = 0,
-	SJCD_S_START = 1,
-	SJCD_S_MODE = 2,
-	SJCD_S_READ = 3,
-	SJCD_S_DATA = 4,
-	SJCD_S_STOP = 5,
-	SJCD_S_STOPPING = 6
-};
-static enum sjcd_transfer_state sjcd_transfer_state = SJCD_S_IDLE;
-static long sjcd_transfer_timeout = 0;
-static int sjcd_read_count = 0;
-static unsigned char sjcd_mode = 0;
-
-#define SJCD_READ_TIMEOUT 5000
-
-#if defined( SJCD_GATHER_STAT )
-/*
- * Statistic.
- */
-static struct sjcd_stat statistic;
-#endif
-
-/*
- * Timer.
- */
-static DEFINE_TIMER(sjcd_delay_timer, NULL, 0, 0);
-
-#define SJCD_SET_TIMER( func, tmout )           \
-    ( sjcd_delay_timer.expires = jiffies+tmout,         \
-      sjcd_delay_timer.function = ( void * )func, \
-      add_timer( &sjcd_delay_timer ) )
-
-#define CLEAR_TIMER del_timer( &sjcd_delay_timer )
-
-/*
- * Set up device, i.e., use command line data to set
- * base address.
- */
-#ifndef MODULE
-static int __init sjcd_setup(char *str)
-{
-	int ints[2];
-	(void) get_options(str, ARRAY_SIZE(ints), ints);
-	if (ints[0] > 0)
-		sjcd_base = ints[1];
-
-	return 1;
-}
-
-__setup("sjcd=", sjcd_setup);
-
-#endif
-
-/*
- * Special converters.
- */
-static unsigned char bin2bcd(int bin)
-{
-	int u, v;
-
-	u = bin % 10;
-	v = bin / 10;
-	return (u | (v << 4));
-}
-
-static int bcd2bin(unsigned char bcd)
-{
-	return ((bcd >> 4) * 10 + (bcd & 0x0F));
-}
-
-static long msf2hsg(struct msf *mp)
-{
-	return (bcd2bin(mp->frame) + bcd2bin(mp->sec) * 75
-		+ bcd2bin(mp->min) * 4500 - 150);
-}
-
-static void hsg2msf(long hsg, struct msf *msf)
-{
-	hsg += 150;
-	msf->min = hsg / 4500;
-	hsg %= 4500;
-	msf->sec = hsg / 75;
-	msf->frame = hsg % 75;
-	msf->min = bin2bcd(msf->min);	/* convert to BCD */
-	msf->sec = bin2bcd(msf->sec);
-	msf->frame = bin2bcd(msf->frame);
-}
-
-/*
- * Send a command to cdrom. Invalidate status.
- */
-static void sjcd_send_cmd(unsigned char cmd)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: send_cmd( 0x%x )\n", cmd);
-#endif
-	outb(cmd, SJCDPORT(0));
-	sjcd_command_is_in_progress = 1;
-	sjcd_status_valid = 0;
-	sjcd_command_failed = 0;
-}
-
-/*
- * Send a command with one arg to cdrom. Invalidate status.
- */
-static void sjcd_send_1_cmd(unsigned char cmd, unsigned char a)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: send_1_cmd( 0x%x, 0x%x )\n", cmd, a);
-#endif
-	outb(cmd, SJCDPORT(0));
-	outb(a, SJCDPORT(0));
-	sjcd_command_is_in_progress = 1;
-	sjcd_status_valid = 0;
-	sjcd_command_failed = 0;
-}
-
-/*
- * Send a command with four args to cdrom. Invalidate status.
- */
-static void sjcd_send_4_cmd(unsigned char cmd, unsigned char a,
-			    unsigned char b, unsigned char c,
-			    unsigned char d)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: send_4_cmd( 0x%x )\n", cmd);
-#endif
-	outb(cmd, SJCDPORT(0));
-	outb(a, SJCDPORT(0));
-	outb(b, SJCDPORT(0));
-	outb(c, SJCDPORT(0));
-	outb(d, SJCDPORT(0));
-	sjcd_command_is_in_progress = 1;
-	sjcd_status_valid = 0;
-	sjcd_command_failed = 0;
-}
-
-/*
- * Send a play or read command to cdrom. Invalidate Status.
- */
-static void sjcd_send_6_cmd(unsigned char cmd, struct sjcd_play_msf *pms)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: send_long_cmd( 0x%x )\n", cmd);
-#endif
-	outb(cmd, SJCDPORT(0));
-	outb(pms->start.min, SJCDPORT(0));
-	outb(pms->start.sec, SJCDPORT(0));
-	outb(pms->start.frame, SJCDPORT(0));
-	outb(pms->end.min, SJCDPORT(0));
-	outb(pms->end.sec, SJCDPORT(0));
-	outb(pms->end.frame, SJCDPORT(0));
-	sjcd_command_is_in_progress = 1;
-	sjcd_status_valid = 0;
-	sjcd_command_failed = 0;
-}
-
-/*
- * Get a value from the data port. Should not block, so we use a little
- * wait for a while. Returns 0 if OK.
- */
-static int sjcd_load_response(void *buf, int len)
-{
-	unsigned char *resp = (unsigned char *) buf;
-
-	for (; len; --len) {
-		int i;
-		for (i = 200;
-		     i-- && !SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1))););
-		if (i > 0)
-			*resp++ = (unsigned char) inb(SJCDPORT(0));
-		else
-			break;
-	}
-	return (len);
-}
-
-/*
- * Load and parse command completion status (drive info byte and maybe error).
- * Sorry, no error classification yet.
- */
-static void sjcd_load_status(void)
-{
-	sjcd_media_is_changed = 0;
-	sjcd_completion_error = 0;
-	sjcd_completion_status = inb(SJCDPORT(0));
-	if (sjcd_completion_status & SST_DOOR_OPENED) {
-		sjcd_door_closed = sjcd_media_is_available = 0;
-	} else {
-		sjcd_door_closed = 1;
-		if (sjcd_completion_status & SST_MEDIA_CHANGED)
-			sjcd_media_is_available = sjcd_media_is_changed =
-			    1;
-		else if (sjcd_completion_status & 0x0F) {
-			/*
-			 * OK, we seem to catch an error ...
-			 */
-			while (!SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1))));
-			sjcd_completion_error = inb(SJCDPORT(0));
-			if ((sjcd_completion_status & 0x08) &&
-			    (sjcd_completion_error & 0x40))
-				sjcd_media_is_available = 0;
-			else
-				sjcd_command_failed = 1;
-		} else
-			sjcd_media_is_available = 1;
-	}
-	/*
-	 * Ok, status loaded successfully.
-	 */
-	sjcd_status_valid = 1, sjcd_error_reported = 0;
-	sjcd_command_is_in_progress = 0;
-
-	/*
-	 * If the disk is changed, the TOC is not valid.
-	 */
-	if (sjcd_media_is_changed)
-		sjcd_toc_uptodate = 0;
-#if defined( SJCD_TRACE )
-	printk("SJCD: status %02x.%02x loaded.\n",
-	       (int) sjcd_completion_status, (int) sjcd_completion_error);
-#endif
-}
-
-/*
- * Read status from cdrom. Check to see if the status is available.
- */
-static int sjcd_check_status(void)
-{
-	/*
-	 * Try to load the response from cdrom into buffer.
-	 */
-	if (SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1)))) {
-		sjcd_load_status();
-		return (1);
-	} else {
-		/*
-		 * No status is available.
-		 */
-		return (0);
-	}
-}
-
-/*
- * This is just timeout counter, and nothing more. Surprised ? :-)
- */
-static volatile long sjcd_status_timeout;
-
-/*
- * We need about 10 seconds to wait. The longest command takes about 5 seconds
- * to probe the disk (usually after tray closed or drive reset). Other values
- * should be thought of for other commands.
- */
-#define SJCD_WAIT_FOR_STATUS_TIMEOUT 1000
-
-static void sjcd_status_timer(void)
-{
-	if (sjcd_check_status()) {
-		/*
-		 * The command completed and status is loaded, stop waiting.
-		 */
-		wake_up(&sjcd_waitq);
-	} else if (--sjcd_status_timeout <= 0) {
-		/*
-		 * We are timed out. 
-		 */
-		wake_up(&sjcd_waitq);
-	} else {
-		/*
-		 * We have still some time to wait. Try again.
-		 */
-		SJCD_SET_TIMER(sjcd_status_timer, 1);
-	}
-}
-
-/*
- * Wait for status for 10 sec approx. Returns non-positive when timed out.
- * Should not be used while reading data CDs.
- */
-static int sjcd_wait_for_status(void)
-{
-	sjcd_status_timeout = SJCD_WAIT_FOR_STATUS_TIMEOUT;
-	SJCD_SET_TIMER(sjcd_status_timer, 1);
-	sleep_on(&sjcd_waitq);
-#if defined( SJCD_DIAGNOSTIC ) || defined ( SJCD_TRACE )
-	if (sjcd_status_timeout <= 0)
-		printk("SJCD: Error Wait For Status.\n");
-#endif
-	return (sjcd_status_timeout);
-}
-
-static int sjcd_receive_status(void)
-{
-	int i;
-#if defined( SJCD_TRACE )
-	printk("SJCD: receive_status\n");
-#endif
-	/*
-	 * Wait a bit for status available.
-	 */
-	for (i = 200; i-- && (sjcd_check_status() == 0););
-	if (i < 0) {
-#if defined( SJCD_TRACE )
-		printk("SJCD: long wait for status\n");
-#endif
-		if (sjcd_wait_for_status() <= 0)
-			printk("SJCD: Timeout when read status.\n");
-		else
-			i = 0;
-	}
-	return (i);
-}
-
-/*
- * Load the status. Issue get status command and wait for status available.
- */
-static void sjcd_get_status(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: get_status\n");
-#endif
-	sjcd_send_cmd(SCMD_GET_STATUS);
-	sjcd_receive_status();
-}
-
-/*
- * Check the drive if the disk is changed. Should be revised.
- */
-static int sjcd_disk_change(struct gendisk *disk)
-{
-#if 0
-	printk("SJCD: sjcd_disk_change(%s)\n", disk->disk_name);
-#endif
-	if (!sjcd_command_is_in_progress)
-		sjcd_get_status();
-	return (sjcd_status_valid ? sjcd_media_is_changed : 0);
-}
-
-/*
- * Read the table of contents (TOC) and TOC header if necessary.
- * We assume that the drive contains no more than 99 toc entries.
- */
-static struct sjcd_hw_disk_info sjcd_table_of_contents[SJCD_MAX_TRACKS];
-static unsigned char sjcd_first_track_no, sjcd_last_track_no;
-#define sjcd_disk_length  sjcd_table_of_contents[0].un.track_msf
-
-static int sjcd_update_toc(void)
-{
-	struct sjcd_hw_disk_info info;
-	int i;
-#if defined( SJCD_TRACE )
-	printk("SJCD: update toc:\n");
-#endif
-	/*
-	 * check to see if we need to do anything
-	 */
-	if (sjcd_toc_uptodate)
-		return (0);
-
-	/*
-	 * Get the TOC start information.
-	 */
-	sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_1_TRACK);
-	sjcd_receive_status();
-
-	if (!sjcd_status_valid) {
-		printk("SJCD: cannot load status.\n");
-		return (-1);
-	}
-
-	if (!sjcd_media_is_available) {
-		printk("SJCD: no disk in drive\n");
-		return (-1);
-	}
-
-	if (!sjcd_command_failed) {
-		if (sjcd_load_response(&info, sizeof(info)) != 0) {
-			printk
-			    ("SJCD: cannot load response about TOC start.\n");
-			return (-1);
-		}
-		sjcd_first_track_no = bcd2bin(info.un.track_no);
-	} else {
-		printk("SJCD: get first failed\n");
-		return (-1);
-	}
-#if defined( SJCD_TRACE )
-	printk("SJCD: TOC start 0x%02x ", sjcd_first_track_no);
-#endif
-	/*
-	 * Get the TOC finish information.
-	 */
-	sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_L_TRACK);
-	sjcd_receive_status();
-
-	if (!sjcd_status_valid) {
-		printk("SJCD: cannot load status.\n");
-		return (-1);
-	}
-
-	if (!sjcd_media_is_available) {
-		printk("SJCD: no disk in drive\n");
-		return (-1);
-	}
-
-	if (!sjcd_command_failed) {
-		if (sjcd_load_response(&info, sizeof(info)) != 0) {
-			printk
-			    ("SJCD: cannot load response about TOC finish.\n");
-			return (-1);
-		}
-		sjcd_last_track_no = bcd2bin(info.un.track_no);
-	} else {
-		printk("SJCD: get last failed\n");
-		return (-1);
-	}
-#if defined( SJCD_TRACE )
-	printk("SJCD: TOC finish 0x%02x ", sjcd_last_track_no);
-#endif
-	for (i = sjcd_first_track_no; i <= sjcd_last_track_no; i++) {
-		/*
-		 * Get the first track information.
-		 */
-		sjcd_send_1_cmd(SCMD_GET_DISK_INFO, bin2bcd(i));
-		sjcd_receive_status();
-
-		if (!sjcd_status_valid) {
-			printk("SJCD: cannot load status.\n");
-			return (-1);
-		}
-
-		if (!sjcd_media_is_available) {
-			printk("SJCD: no disk in drive\n");
-			return (-1);
-		}
-
-		if (!sjcd_command_failed) {
-			if (sjcd_load_response(&sjcd_table_of_contents[i],
-					       sizeof(struct
-						      sjcd_hw_disk_info))
-			    != 0) {
-				printk
-				    ("SJCD: cannot load info for %d track\n",
-				     i);
-				return (-1);
-			}
-		} else {
-			printk("SJCD: get info %d failed\n", i);
-			return (-1);
-		}
-	}
-
-	/*
-	 * Get the disk length info.
-	 */
-	sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_D_SIZE);
-	sjcd_receive_status();
-
-	if (!sjcd_status_valid) {
-		printk("SJCD: cannot load status.\n");
-		return (-1);
-	}
-
-	if (!sjcd_media_is_available) {
-		printk("SJCD: no disk in drive\n");
-		return (-1);
-	}
-
-	if (!sjcd_command_failed) {
-		if (sjcd_load_response(&info, sizeof(info)) != 0) {
-			printk
-			    ("SJCD: cannot load response about disk size.\n");
-			return (-1);
-		}
-		sjcd_disk_length.min = info.un.track_msf.min;
-		sjcd_disk_length.sec = info.un.track_msf.sec;
-		sjcd_disk_length.frame = info.un.track_msf.frame;
-	} else {
-		printk("SJCD: get size failed\n");
-		return (1);
-	}
-#if defined( SJCD_TRACE )
-	printk("SJCD: (%02x:%02x.%02x)\n", sjcd_disk_length.min,
-	       sjcd_disk_length.sec, sjcd_disk_length.frame);
-#endif
-	return (0);
-}
-
-/*
- * Load subchannel information.
- */
-static int sjcd_get_q_info(struct sjcd_hw_qinfo *qp)
-{
-	int s;
-#if defined( SJCD_TRACE )
-	printk("SJCD: load sub q\n");
-#endif
-	sjcd_send_cmd(SCMD_GET_QINFO);
-	s = sjcd_receive_status();
-	if (s < 0 || sjcd_command_failed || !sjcd_status_valid) {
-		sjcd_send_cmd(0xF2);
-		s = sjcd_receive_status();
-		if (s < 0 || sjcd_command_failed || !sjcd_status_valid)
-			return (-1);
-		sjcd_send_cmd(SCMD_GET_QINFO);
-		s = sjcd_receive_status();
-		if (s < 0 || sjcd_command_failed || !sjcd_status_valid)
-			return (-1);
-	}
-	if (sjcd_media_is_available)
-		if (sjcd_load_response(qp, sizeof(*qp)) == 0)
-			return (0);
-	return (-1);
-}
-
-/*
- * Start playing from the specified position.
- */
-static int sjcd_play(struct sjcd_play_msf *mp)
-{
-	struct sjcd_play_msf msf;
-
-	/*
-	 * Turn the device to play mode.
-	 */
-	sjcd_send_1_cmd(SCMD_SET_MODE, SCMD_MODE_PLAY);
-	if (sjcd_receive_status() < 0)
-		return (-1);
-
-	/*
-	 * Seek to the starting point.
-	 */
-	msf.start = mp->start;
-	msf.end.min = msf.end.sec = msf.end.frame = 0x00;
-	sjcd_send_6_cmd(SCMD_SEEK, &msf);
-	if (sjcd_receive_status() < 0)
-		return (-1);
-
-	/*
-	 * Start playing.
-	 */
-	sjcd_send_6_cmd(SCMD_PLAY, mp);
-	return (sjcd_receive_status());
-}
-
-/*
- * Tray control functions.
- */
-static int sjcd_tray_close(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: tray_close\n");
-#endif
-	sjcd_send_cmd(SCMD_CLOSE_TRAY);
-	return (sjcd_receive_status());
-}
-
-static int sjcd_tray_lock(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: tray_lock\n");
-#endif
-	sjcd_send_cmd(SCMD_LOCK_TRAY);
-	return (sjcd_receive_status());
-}
-
-static int sjcd_tray_unlock(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: tray_unlock\n");
-#endif
-	sjcd_send_cmd(SCMD_UNLOCK_TRAY);
-	return (sjcd_receive_status());
-}
-
-static int sjcd_tray_open(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: tray_open\n");
-#endif
-	sjcd_send_cmd(SCMD_EJECT_TRAY);
-	return (sjcd_receive_status());
-}
-
-/*
- * Do some user commands.
- */
-static int sjcd_ioctl(struct inode *ip, struct file *fp,
-		      unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-#if defined( SJCD_TRACE )
-	printk("SJCD:ioctl\n");
-#endif
-
-	sjcd_get_status();
-	if (!sjcd_status_valid)
-		return (-EIO);
-	if (sjcd_update_toc() < 0)
-		return (-EIO);
-
-	switch (cmd) {
-	case CDROMSTART:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: start\n");
-#endif
-			return (0);
-		}
-
-	case CDROMSTOP:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: stop\n");
-#endif
-			sjcd_send_cmd(SCMD_PAUSE);
-			(void) sjcd_receive_status();
-			sjcd_audio_status = CDROM_AUDIO_NO_STATUS;
-			return (0);
-		}
-
-	case CDROMPAUSE:{
-			struct sjcd_hw_qinfo q_info;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: pause\n");
-#endif
-			if (sjcd_audio_status == CDROM_AUDIO_PLAY) {
-				sjcd_send_cmd(SCMD_PAUSE);
-				(void) sjcd_receive_status();
-				if (sjcd_get_q_info(&q_info) < 0) {
-					sjcd_audio_status =
-					    CDROM_AUDIO_NO_STATUS;
-				} else {
-					sjcd_audio_status =
-					    CDROM_AUDIO_PAUSED;
-					sjcd_playing.start = q_info.abs;
-				}
-				return (0);
-			} else
-				return (-EINVAL);
-		}
-
-	case CDROMRESUME:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: resume\n");
-#endif
-			if (sjcd_audio_status == CDROM_AUDIO_PAUSED) {
-				/*
-				 * continue play starting at saved location
-				 */
-				if (sjcd_play(&sjcd_playing) < 0) {
-					sjcd_audio_status =
-					    CDROM_AUDIO_ERROR;
-					return (-EIO);
-				} else {
-					sjcd_audio_status =
-					    CDROM_AUDIO_PLAY;
-					return (0);
-				}
-			} else
-				return (-EINVAL);
-		}
-
-	case CDROMPLAYTRKIND:{
-			struct cdrom_ti ti;
-			int s = -EFAULT;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: playtrkind\n");
-#endif
-			if (!copy_from_user(&ti, argp, sizeof(ti))) {
-				s = 0;
-				if (ti.cdti_trk0 < sjcd_first_track_no)
-					return (-EINVAL);
-				if (ti.cdti_trk1 > sjcd_last_track_no)
-					ti.cdti_trk1 = sjcd_last_track_no;
-				if (ti.cdti_trk0 > ti.cdti_trk1)
-					return (-EINVAL);
-
-				sjcd_playing.start =
-				    sjcd_table_of_contents[ti.cdti_trk0].
-				    un.track_msf;
-				sjcd_playing.end =
-				    (ti.cdti_trk1 <
-				     sjcd_last_track_no) ?
-				    sjcd_table_of_contents[ti.cdti_trk1 +
-							   1].un.
-				    track_msf : sjcd_table_of_contents[0].
-				    un.track_msf;
-
-				if (sjcd_play(&sjcd_playing) < 0) {
-					sjcd_audio_status =
-					    CDROM_AUDIO_ERROR;
-					return (-EIO);
-				} else
-					sjcd_audio_status =
-					    CDROM_AUDIO_PLAY;
-			}
-			return (s);
-		}
-
-	case CDROMPLAYMSF:{
-			struct cdrom_msf sjcd_msf;
-			int s;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: playmsf\n");
-#endif
-			if ((s =
-			     access_ok(VERIFY_READ, argp, sizeof(sjcd_msf))
-			     		? 0 : -EFAULT) == 0) {
-				if (sjcd_audio_status == CDROM_AUDIO_PLAY) {
-					sjcd_send_cmd(SCMD_PAUSE);
-					(void) sjcd_receive_status();
-					sjcd_audio_status =
-					    CDROM_AUDIO_NO_STATUS;
-				}
-
-				if (copy_from_user(&sjcd_msf, argp,
-					       sizeof(sjcd_msf)))
-					return (-EFAULT);
-
-				sjcd_playing.start.min =
-				    bin2bcd(sjcd_msf.cdmsf_min0);
-				sjcd_playing.start.sec =
-				    bin2bcd(sjcd_msf.cdmsf_sec0);
-				sjcd_playing.start.frame =
-				    bin2bcd(sjcd_msf.cdmsf_frame0);
-				sjcd_playing.end.min =
-				    bin2bcd(sjcd_msf.cdmsf_min1);
-				sjcd_playing.end.sec =
-				    bin2bcd(sjcd_msf.cdmsf_sec1);
-				sjcd_playing.end.frame =
-				    bin2bcd(sjcd_msf.cdmsf_frame1);
-
-				if (sjcd_play(&sjcd_playing) < 0) {
-					sjcd_audio_status =
-					    CDROM_AUDIO_ERROR;
-					return (-EIO);
-				} else
-					sjcd_audio_status =
-					    CDROM_AUDIO_PLAY;
-			}
-			return (s);
-		}
-
-	case CDROMREADTOCHDR:{
-			struct cdrom_tochdr toc_header;
-#if defined (SJCD_TRACE )
-			printk("SJCD: ioctl: readtocheader\n");
-#endif
-			toc_header.cdth_trk0 = sjcd_first_track_no;
-			toc_header.cdth_trk1 = sjcd_last_track_no;
-			if (copy_to_user(argp, &toc_header,
-					 sizeof(toc_header)))
-				return -EFAULT;
-			return 0;
-		}
-
-	case CDROMREADTOCENTRY:{
-			struct cdrom_tocentry toc_entry;
-			int s;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: readtocentry\n");
-#endif
-			if ((s =
-			     access_ok(VERIFY_WRITE, argp, sizeof(toc_entry))
-			     		? 0 : -EFAULT) == 0) {
-				struct sjcd_hw_disk_info *tp;
-
-				if (copy_from_user(&toc_entry, argp,
-					       sizeof(toc_entry)))
-					return (-EFAULT);
-				if (toc_entry.cdte_track == CDROM_LEADOUT)
-					tp = &sjcd_table_of_contents[0];
-				else if (toc_entry.cdte_track <
-					 sjcd_first_track_no)
-					return (-EINVAL);
-				else if (toc_entry.cdte_track >
-					 sjcd_last_track_no)
-					return (-EINVAL);
-				else
-					tp = &sjcd_table_of_contents
-					    [toc_entry.cdte_track];
-
-				toc_entry.cdte_adr =
-				    tp->track_control & 0x0F;
-				toc_entry.cdte_ctrl =
-				    tp->track_control >> 4;
-
-				switch (toc_entry.cdte_format) {
-				case CDROM_LBA:
-					toc_entry.cdte_addr.lba =
-					    msf2hsg(&(tp->un.track_msf));
-					break;
-				case CDROM_MSF:
-					toc_entry.cdte_addr.msf.minute =
-					    bcd2bin(tp->un.track_msf.min);
-					toc_entry.cdte_addr.msf.second =
-					    bcd2bin(tp->un.track_msf.sec);
-					toc_entry.cdte_addr.msf.frame =
-					    bcd2bin(tp->un.track_msf.
-						    frame);
-					break;
-				default:
-					return (-EINVAL);
-				}
-				if (copy_to_user(argp, &toc_entry,
-						 sizeof(toc_entry)))
-					s = -EFAULT;
-			}
-			return (s);
-		}
-
-	case CDROMSUBCHNL:{
-			struct cdrom_subchnl subchnl;
-			int s;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: subchnl\n");
-#endif
-			if ((s =
-			     access_ok(VERIFY_WRITE, argp, sizeof(subchnl))
-			     		? 0 : -EFAULT) == 0) {
-				struct sjcd_hw_qinfo q_info;
-
-				if (copy_from_user(&subchnl, argp,
-					       sizeof(subchnl)))
-					return (-EFAULT);
-
-				if (sjcd_get_q_info(&q_info) < 0)
-					return (-EIO);
-
-				subchnl.cdsc_audiostatus =
-				    sjcd_audio_status;
-				subchnl.cdsc_adr =
-				    q_info.track_control & 0x0F;
-				subchnl.cdsc_ctrl =
-				    q_info.track_control >> 4;
-				subchnl.cdsc_trk =
-				    bcd2bin(q_info.track_no);
-				subchnl.cdsc_ind = bcd2bin(q_info.x);
-
-				switch (subchnl.cdsc_format) {
-				case CDROM_LBA:
-					subchnl.cdsc_absaddr.lba =
-					    msf2hsg(&(q_info.abs));
-					subchnl.cdsc_reladdr.lba =
-					    msf2hsg(&(q_info.rel));
-					break;
-				case CDROM_MSF:
-					subchnl.cdsc_absaddr.msf.minute =
-					    bcd2bin(q_info.abs.min);
-					subchnl.cdsc_absaddr.msf.second =
-					    bcd2bin(q_info.abs.sec);
-					subchnl.cdsc_absaddr.msf.frame =
-					    bcd2bin(q_info.abs.frame);
-					subchnl.cdsc_reladdr.msf.minute =
-					    bcd2bin(q_info.rel.min);
-					subchnl.cdsc_reladdr.msf.second =
-					    bcd2bin(q_info.rel.sec);
-					subchnl.cdsc_reladdr.msf.frame =
-					    bcd2bin(q_info.rel.frame);
-					break;
-				default:
-					return (-EINVAL);
-				}
-				if (copy_to_user(argp, &subchnl,
-					         sizeof(subchnl)))
-					s = -EFAULT;
-			}
-			return (s);
-		}
-
-	case CDROMVOLCTRL:{
-			struct cdrom_volctrl vol_ctrl;
-			int s;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: volctrl\n");
-#endif
-			if ((s =
-			     access_ok(VERIFY_READ, argp, sizeof(vol_ctrl))
-			     		? 0 : -EFAULT) == 0) {
-				unsigned char dummy[4];
-
-				if (copy_from_user(&vol_ctrl, argp,
-					       sizeof(vol_ctrl)))
-					return (-EFAULT);
-				sjcd_send_4_cmd(SCMD_SET_VOLUME,
-						vol_ctrl.channel0, 0xFF,
-						vol_ctrl.channel1, 0xFF);
-				if (sjcd_receive_status() < 0)
-					return (-EIO);
-				(void) sjcd_load_response(dummy, 4);
-			}
-			return (s);
-		}
-
-	case CDROMEJECT:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: eject\n");
-#endif
-			if (!sjcd_command_is_in_progress) {
-				sjcd_tray_unlock();
-				sjcd_send_cmd(SCMD_EJECT_TRAY);
-				(void) sjcd_receive_status();
-			}
-			return (0);
-		}
-
-#if defined( SJCD_GATHER_STAT )
-	case 0xABCD:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: statistic\n");
-#endif
-			if (copy_to_user(argp, &statistic, sizeof(statistic)))
-				return -EFAULT;
-			return 0;
-		}
-#endif
-
-	default:
-		return (-EINVAL);
-	}
-}
-
-/*
- * Invalidate internal buffers of the driver.
- */
-static void sjcd_invalidate_buffers(void)
-{
-	int i;
-	for (i = 0; i < SJCD_BUF_SIZ; sjcd_buf_bn[i++] = -1);
-	sjcd_buf_out = -1;
-}
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-
-static int current_valid(void)
-{
-        return CURRENT &&
-		rq_data_dir(CURRENT) == READ &&
-		CURRENT->sector != -1;
-}
-
-static void sjcd_transfer(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: transfer:\n");
-#endif
-	if (current_valid()) {
-		while (CURRENT->nr_sectors) {
-			int i, bn = CURRENT->sector / 4;
-			for (i = 0;
-			     i < SJCD_BUF_SIZ && sjcd_buf_bn[i] != bn;
-			     i++);
-			if (i < SJCD_BUF_SIZ) {
-				int offs =
-				    (i * 4 + (CURRENT->sector & 3)) * 512;
-				int nr_sectors = 4 - (CURRENT->sector & 3);
-				if (sjcd_buf_out != i) {
-					sjcd_buf_out = i;
-					if (sjcd_buf_bn[i] != bn) {
-						sjcd_buf_out = -1;
-						continue;
-					}
-				}
-				if (nr_sectors > CURRENT->nr_sectors)
-					nr_sectors = CURRENT->nr_sectors;
-#if defined( SJCD_TRACE )
-				printk("SJCD: copy out\n");
-#endif
-				memcpy(CURRENT->buffer, sjcd_buf + offs,
-				       nr_sectors * 512);
-				CURRENT->nr_sectors -= nr_sectors;
-				CURRENT->sector += nr_sectors;
-				CURRENT->buffer += nr_sectors * 512;
-			} else {
-				sjcd_buf_out = -1;
-				break;
-			}
-		}
-	}
-#if defined( SJCD_TRACE )
-	printk("SJCD: transfer: done\n");
-#endif
-}
-
-static void sjcd_poll(void)
-{
-#if defined( SJCD_GATHER_STAT )
-	/*
-	 * Update total number of ticks.
-	 */
-	statistic.ticks++;
-	statistic.tticks[sjcd_transfer_state]++;
-#endif
-
-      ReSwitch:switch (sjcd_transfer_state) {
-
-	case SJCD_S_IDLE:{
-#if defined( SJCD_GATHER_STAT )
-			statistic.idle_ticks++;
-#endif
-#if defined( SJCD_TRACE )
-			printk("SJCD_S_IDLE\n");
-#endif
-			return;
-		}
-
-	case SJCD_S_START:{
-#if defined( SJCD_GATHER_STAT )
-			statistic.start_ticks++;
-#endif
-			sjcd_send_cmd(SCMD_GET_STATUS);
-			sjcd_transfer_state =
-			    sjcd_mode ==
-			    SCMD_MODE_COOKED ? SJCD_S_READ : SJCD_S_MODE;
-			sjcd_transfer_timeout = 500;
-#if defined( SJCD_TRACE )
-			printk("SJCD_S_START: goto SJCD_S_%s mode\n",
-			       sjcd_transfer_state ==
-			       SJCD_S_READ ? "READ" : "MODE");
-#endif
-			break;
-		}
-
-	case SJCD_S_MODE:{
-			if (sjcd_check_status()) {
-				/*
-				 * Previous command is completed.
-				 */
-				if (!sjcd_status_valid
-				    || sjcd_command_failed) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_MODE: pre-cmd failed: goto to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-
-				sjcd_mode = 0;	/* unknown mode; should not be valid when failed */
-				sjcd_send_1_cmd(SCMD_SET_MODE,
-						SCMD_MODE_COOKED);
-				sjcd_transfer_state = SJCD_S_READ;
-				sjcd_transfer_timeout = 1000;
-#if defined( SJCD_TRACE )
-				printk
-				    ("SJCD_S_MODE: goto SJCD_S_READ mode\n");
-#endif
-			}
-#if defined( SJCD_GATHER_STAT )
-			else
-				statistic.mode_ticks++;
-#endif
-			break;
-		}
-
-	case SJCD_S_READ:{
-			if (sjcd_status_valid ? 1 : sjcd_check_status()) {
-				/*
-				 * Previous command is completed.
-				 */
-				if (!sjcd_status_valid
-				    || sjcd_command_failed) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_READ: pre-cmd failed: goto to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-				if (!sjcd_media_is_available) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_READ: no disk: goto to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-				if (sjcd_mode != SCMD_MODE_COOKED) {
-					/*
-					 * We seem to come from set mode. So discard one byte of result.
-					 */
-					if (sjcd_load_response
-					    (&sjcd_mode, 1) != 0) {
-#if defined( SJCD_TRACE )
-						printk
-						    ("SJCD_S_READ: load failed: goto to SJCD_S_STOP mode\n");
-#endif
-						sjcd_transfer_state =
-						    SJCD_S_STOP;
-						goto ReSwitch;
-					}
-					if (sjcd_mode != SCMD_MODE_COOKED) {
-#if defined( SJCD_TRACE )
-						printk
-						    ("SJCD_S_READ: mode failed: goto to SJCD_S_STOP mode\n");
-#endif
-						sjcd_transfer_state =
-						    SJCD_S_STOP;
-						goto ReSwitch;
-					}
-				}
-
-				if (current_valid()) {
-					struct sjcd_play_msf msf;
-
-					sjcd_next_bn = CURRENT->sector / 4;
-					hsg2msf(sjcd_next_bn, &msf.start);
-					msf.end.min = 0;
-					msf.end.sec = 0;
-					msf.end.frame = sjcd_read_count =
-					    SJCD_BUF_SIZ;
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD: ---reading msf-address %x:%x:%x  %x:%x:%x\n",
-					     msf.start.min, msf.start.sec,
-					     msf.start.frame, msf.end.min,
-					     msf.end.sec, msf.end.frame);
-					printk
-					    ("sjcd_next_bn:%x buf_in:%x buf_out:%x buf_bn:%x\n",
-					     sjcd_next_bn, sjcd_buf_in,
-					     sjcd_buf_out,
-					     sjcd_buf_bn[sjcd_buf_in]);
-#endif
-					sjcd_send_6_cmd(SCMD_DATA_READ,
-							&msf);
-					sjcd_transfer_state = SJCD_S_DATA;
-					sjcd_transfer_timeout = 500;
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_READ: go to SJCD_S_DATA mode\n");
-#endif
-				} else {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_READ: nothing to read: go to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-			}
-#if defined( SJCD_GATHER_STAT )
-			else
-				statistic.read_ticks++;
-#endif
-			break;
-		}
-
-	case SJCD_S_DATA:{
-			unsigned char stat;
-
-		      sjcd_s_data:stat =
-			    inb(SJCDPORT
-				(1));
-#if defined( SJCD_TRACE )
-			printk("SJCD_S_DATA: status = 0x%02x\n", stat);
-#endif
-			if (SJCD_STATUS_AVAILABLE(stat)) {
-				/*
-				 * No data is waiting for us in the drive buffer. Status of operation
-				 * completion is available. Read and parse it.
-				 */
-				sjcd_load_status();
-
-				if (!sjcd_status_valid
-				    || sjcd_command_failed) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD: read block %d failed, maybe audio disk? Giving up\n",
-					     sjcd_next_bn);
-#endif
-					if (current_valid())
-						end_request(CURRENT, 0);
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_DATA: pre-cmd failed: go to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-
-				if (!sjcd_media_is_available) {
-					printk
-					    ("SJCD_S_DATA: no disk: go to SJCD_S_STOP mode\n");
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-
-				sjcd_transfer_state = SJCD_S_READ;
-				goto ReSwitch;
-			} else if (SJCD_DATA_AVAILABLE(stat)) {
-				/*
-				 * One frame is read into device buffer. We must copy it to our memory.
-				 * Otherwise cdrom hangs up. Check to see if we have something to copy
-				 * to.
-				 */
-				if (!current_valid()
-				    && sjcd_buf_in == sjcd_buf_out) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_DATA: nothing to read: go to SJCD_S_STOP mode\n");
-					printk
-					    (" ... all the date would be discarded\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-
-				/*
-				 * Everything seems to be OK. Just read the frame and recalculate
-				 * indices.
-				 */
-				sjcd_buf_bn[sjcd_buf_in] = -1;	/* ??? */
-				insb(SJCDPORT(2),
-				     sjcd_buf + 2048 * sjcd_buf_in, 2048);
-#if defined( SJCD_TRACE )
-				printk
-				    ("SJCD_S_DATA: next_bn=%d, buf_in=%d, buf_out=%d, buf_bn=%d\n",
-				     sjcd_next_bn, sjcd_buf_in,
-				     sjcd_buf_out,
-				     sjcd_buf_bn[sjcd_buf_in]);
-#endif
-				sjcd_buf_bn[sjcd_buf_in] = sjcd_next_bn++;
-				if (sjcd_buf_out == -1)
-					sjcd_buf_out = sjcd_buf_in;
-				if (++sjcd_buf_in == SJCD_BUF_SIZ)
-					sjcd_buf_in = 0;
-
-				/*
-				 * Only one frame is ready at time. So we should turn over to wait for
-				 * another frame. If we need that, of course.
-				 */
-				if (--sjcd_read_count == 0) {
-					/*
-					 * OK, request seems to be precessed. Continue transferring...
-					 */
-					if (!sjcd_transfer_is_active) {
-						while (current_valid()) {
-							/*
-							 * Continue transferring.
-							 */
-							sjcd_transfer();
-							if (CURRENT->
-							    nr_sectors ==
-							    0)
-								end_request
-								    (CURRENT, 1);
-							else
-								break;
-						}
-					}
-					if (current_valid() &&
-					    (CURRENT->sector / 4 <
-					     sjcd_next_bn
-					     || CURRENT->sector / 4 >
-					     sjcd_next_bn +
-					     SJCD_BUF_SIZ)) {
-#if defined( SJCD_TRACE )
-						printk
-						    ("SJCD_S_DATA: can't read: go to SJCD_S_STOP mode\n");
-#endif
-						sjcd_transfer_state =
-						    SJCD_S_STOP;
-						goto ReSwitch;
-					}
-				}
-				/*
-				 * Now we should turn around rather than wait for while.
-				 */
-				goto sjcd_s_data;
-			}
-#if defined( SJCD_GATHER_STAT )
-			else
-				statistic.data_ticks++;
-#endif
-			break;
-		}
-
-	case SJCD_S_STOP:{
-			sjcd_read_count = 0;
-			sjcd_send_cmd(SCMD_STOP);
-			sjcd_transfer_state = SJCD_S_STOPPING;
-			sjcd_transfer_timeout = 500;
-#if defined( SJCD_GATHER_STAT )
-			statistic.stop_ticks++;
-#endif
-			break;
-		}
-
-	case SJCD_S_STOPPING:{
-			unsigned char stat;
-
-			stat = inb(SJCDPORT(1));
-#if defined( SJCD_TRACE )
-			printk("SJCD_S_STOP: status = 0x%02x\n", stat);
-#endif
-			if (SJCD_DATA_AVAILABLE(stat)) {
-				int i;
-#if defined( SJCD_TRACE )
-				printk("SJCD_S_STOP: discard data\n");
-#endif
-				/*
-				 * Discard all the data from the pipe. Foolish method.
-				 */
-				for (i = 2048; i--;
-				     (void) inb(SJCDPORT(2)));
-				sjcd_transfer_timeout = 500;
-			} else if (SJCD_STATUS_AVAILABLE(stat)) {
-				sjcd_load_status();
-				if (sjcd_status_valid
-				    && sjcd_media_is_changed) {
-					sjcd_toc_uptodate = 0;
-					sjcd_invalidate_buffers();
-				}
-				if (current_valid()) {
-					if (sjcd_status_valid)
-						sjcd_transfer_state =
-						    SJCD_S_READ;
-					else
-						sjcd_transfer_state =
-						    SJCD_S_START;
-				} else
-					sjcd_transfer_state = SJCD_S_IDLE;
-				goto ReSwitch;
-			}
-#if defined( SJCD_GATHER_STAT )
-			else
-				statistic.stopping_ticks++;
-#endif
-			break;
-		}
-
-	default:
-		printk("SJCD: poll: invalid state %d\n",
-		       sjcd_transfer_state);
-		return;
-	}
-
-	if (--sjcd_transfer_timeout == 0) {
-		printk("SJCD: timeout in state %d\n", sjcd_transfer_state);
-		while (current_valid())
-			end_request(CURRENT, 0);
-		sjcd_send_cmd(SCMD_STOP);
-		sjcd_transfer_state = SJCD_S_IDLE;
-		goto ReSwitch;
-	}
-
-	/*
-	 * Get back in some time. 1 should be replaced with count variable to
-	 * avoid unnecessary testings.
-	 */
-	SJCD_SET_TIMER(sjcd_poll, 1);
-}
-
-static void do_sjcd_request(request_queue_t * q)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: do_sjcd_request(%ld+%ld)\n",
-	       CURRENT->sector, CURRENT->nr_sectors);
-#endif
-	sjcd_transfer_is_active = 1;
-	while (current_valid()) {
-		sjcd_transfer();
-		if (CURRENT->nr_sectors == 0)
-			end_request(CURRENT, 1);
-		else {
-			sjcd_buf_out = -1;	/* Want to read a block not in buffer */
-			if (sjcd_transfer_state == SJCD_S_IDLE) {
-				if (!sjcd_toc_uptodate) {
-					if (sjcd_update_toc() < 0) {
-						printk
-						    ("SJCD: transfer: discard\n");
-						while (current_valid())
-							end_request(CURRENT, 0);
-						break;
-					}
-				}
-				sjcd_transfer_state = SJCD_S_START;
-				SJCD_SET_TIMER(sjcd_poll, HZ / 100);
-			}
-			break;
-		}
-	}
-	sjcd_transfer_is_active = 0;
-#if defined( SJCD_TRACE )
-	printk
-	    ("sjcd_next_bn:%x sjcd_buf_in:%x sjcd_buf_out:%x sjcd_buf_bn:%x\n",
-	     sjcd_next_bn, sjcd_buf_in, sjcd_buf_out,
-	     sjcd_buf_bn[sjcd_buf_in]);
-	printk("do_sjcd_request ends\n");
-#endif
-}
-
-/*
- * Open the device special file. Check disk is in.
- */
-static int sjcd_open(struct inode *ip, struct file *fp)
-{
-	/*
-	 * Check the presence of device.
-	 */
-	if (!sjcd_present)
-		return (-ENXIO);
-
-	/*
-	 * Only read operations are allowed. Really? (:-)
-	 */
-	if (fp->f_mode & 2)
-		return (-EROFS);
-
-	if (sjcd_open_count == 0) {
-		int s, sjcd_open_tries;
-/* We don't know that, do we? */
-/*
-    sjcd_audio_status = CDROM_AUDIO_NO_STATUS;
-*/
-		sjcd_mode = 0;
-		sjcd_door_was_open = 0;
-		sjcd_transfer_state = SJCD_S_IDLE;
-		sjcd_invalidate_buffers();
-		sjcd_status_valid = 0;
-
-		/*
-		 * Strict status checking.
-		 */
-		for (sjcd_open_tries = 4; --sjcd_open_tries;) {
-			if (!sjcd_status_valid)
-				sjcd_get_status();
-			if (!sjcd_status_valid) {
-#if defined( SJCD_DIAGNOSTIC )
-				printk
-				    ("SJCD: open: timed out when check status.\n");
-#endif
-				goto err_out;
-			} else if (!sjcd_media_is_available) {
-#if defined( SJCD_DIAGNOSTIC )
-				printk("SJCD: open: no disk in drive\n");
-#endif
-				if (!sjcd_door_closed) {
-					sjcd_door_was_open = 1;
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD: open: close the tray\n");
-#endif
-					s = sjcd_tray_close();
-					if (s < 0 || !sjcd_status_valid
-					    || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
-						printk
-						    ("SJCD: open: tray close attempt failed\n");
-#endif
-						goto err_out;
-					}
-					continue;
-				} else
-					goto err_out;
-			}
-			break;
-		}
-		s = sjcd_tray_lock();
-		if (s < 0 || !sjcd_status_valid || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
-			printk("SJCD: open: tray lock attempt failed\n");
-#endif
-			goto err_out;
-		}
-#if defined( SJCD_TRACE )
-		printk("SJCD: open: done\n");
-#endif
-	}
-
-	++sjcd_open_count;
-	return (0);
-
-      err_out:
-	return (-EIO);
-}
-
-/*
- * On close, we flush all sjcd blocks from the buffer cache.
- */
-static int sjcd_release(struct inode *inode, struct file *file)
-{
-	int s;
-
-#if defined( SJCD_TRACE )
-	printk("SJCD: release\n");
-#endif
-	if (--sjcd_open_count == 0) {
-		sjcd_invalidate_buffers();
-		s = sjcd_tray_unlock();
-		if (s < 0 || !sjcd_status_valid || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
-			printk
-			    ("SJCD: release: tray unlock attempt failed.\n");
-#endif
-		}
-		if (sjcd_door_was_open) {
-			s = sjcd_tray_open();
-			if (s < 0 || !sjcd_status_valid
-			    || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
-				printk
-				    ("SJCD: release: tray unload attempt failed.\n");
-#endif
-			}
-		}
-	}
-	return 0;
-}
-
-/*
- * A list of file operations allowed for this cdrom.
- */
-static struct block_device_operations sjcd_fops = {
-	.owner		= THIS_MODULE,
-	.open		= sjcd_open,
-	.release	= sjcd_release,
-	.ioctl		= sjcd_ioctl,
-	.media_changed	= sjcd_disk_change,
-};
-
-/*
- * Following stuff is intended for initialization of the cdrom. It
- * first looks for presence of device. If the device is present, it
- * will be reset. Then read the version of the drive and load status.
- * The version is two BCD-coded bytes.
- */
-static struct {
-	unsigned char major, minor;
-} sjcd_version;
-
-static struct gendisk *sjcd_disk;
-
-/*
- * Test for presence of drive and initialize it. Called at boot time.
- * Probe cdrom, find out version and status.
- */
-static int __init sjcd_init(void)
-{
-	int i;
-
-	printk(KERN_INFO
-	       "SJCD: Sanyo CDR-H94A cdrom driver version %d.%d.\n",
-	       SJCD_VERSION_MAJOR, SJCD_VERSION_MINOR);
-
-#if defined( SJCD_TRACE )
-	printk("SJCD: sjcd=0x%x: ", sjcd_base);
-#endif
-
-	if (register_blkdev(MAJOR_NR, "sjcd"))
-		return -EIO;
-
-	sjcd_queue = blk_init_queue(do_sjcd_request, &sjcd_lock);
-	if (!sjcd_queue)
-		goto out0;
-
-	blk_queue_hardsect_size(sjcd_queue, 2048);
-
-	sjcd_disk = alloc_disk(1);
-	if (!sjcd_disk) {
-		printk(KERN_ERR "SJCD: can't allocate disk");
-		goto out1;
-	}
-	sjcd_disk->major = MAJOR_NR,
-	sjcd_disk->first_minor = 0,
-	sjcd_disk->fops = &sjcd_fops,
-	sprintf(sjcd_disk->disk_name, "sjcd");
-
-	if (!request_region(sjcd_base, 4,"sjcd")) {
-		printk
-		    ("SJCD: Init failed, I/O port (%X) is already in use\n",
-		     sjcd_base);
-		goto out2;
-	}
-
-	/*
-	 * Check for card. Since we are booting now, we can't use standard
-	 * wait algorithm.
-	 */
-	printk(KERN_INFO "SJCD: Resetting: ");
-	sjcd_send_cmd(SCMD_RESET);
-	for (i = 1000; i > 0 && !sjcd_status_valid; --i) {
-		unsigned long timer;
-
-		/*
-		 * Wait 10ms approx.
-		 */
-		for (timer = jiffies; time_before_eq(jiffies, timer););
-		if ((i % 100) == 0)
-			printk(".");
-		(void) sjcd_check_status();
-	}
-	if (i == 0 || sjcd_command_failed) {
-		printk(" reset failed, no drive found.\n");
-		goto out3;
-	} else
-		printk("\n");
-
-	/*
-	 * Get and print out cdrom version.
-	 */
-	printk(KERN_INFO "SJCD: Getting version: ");
-	sjcd_send_cmd(SCMD_GET_VERSION);
-	for (i = 1000; i > 0 && !sjcd_status_valid; --i) {
-		unsigned long timer;
-
-		/*
-		 * Wait 10ms approx.
-		 */
-		for (timer = jiffies; time_before_eq(jiffies, timer););
-		if ((i % 100) == 0)
-			printk(".");
-		(void) sjcd_check_status();
-	}
-	if (i == 0 || sjcd_command_failed) {
-		printk(" get version failed, no drive found.\n");
-		goto out3;
-	}
-
-	if (sjcd_load_response(&sjcd_version, sizeof(sjcd_version)) == 0) {
-		printk(" %1x.%02x\n", (int) sjcd_version.major,
-		       (int) sjcd_version.minor);
-	} else {
-		printk(" read version failed, no drive found.\n");
-		goto out3;
-	}
-
-	/*
-	 * Check and print out the tray state. (if it is needed?).
-	 */
-	if (!sjcd_status_valid) {
-		printk(KERN_INFO "SJCD: Getting status: ");
-		sjcd_send_cmd(SCMD_GET_STATUS);
-		for (i = 1000; i > 0 && !sjcd_status_valid; --i) {
-			unsigned long timer;
-
-			/*
-			 * Wait 10ms approx.
-			 */
-			for (timer = jiffies;
-			     time_before_eq(jiffies, timer););
-			if ((i % 100) == 0)
-				printk(".");
-			(void) sjcd_check_status();
-		}
-		if (i == 0 || sjcd_command_failed) {
-			printk(" get status failed, no drive found.\n");
-			goto out3;
-		} else
-			printk("\n");
-	}
-
-	printk(KERN_INFO "SJCD: Status: port=0x%x.\n", sjcd_base);
-	sjcd_disk->queue = sjcd_queue;
-	add_disk(sjcd_disk);
-
-	sjcd_present++;
-	return (0);
-out3:
-	release_region(sjcd_base, 4);
-out2:
-	put_disk(sjcd_disk);
-out1:
-	blk_cleanup_queue(sjcd_queue);
-out0:
-	if ((unregister_blkdev(MAJOR_NR, "sjcd") == -EINVAL))
-		printk("SJCD: cannot unregister device.\n");
-	return (-EIO);
-}
-
-static void __exit sjcd_exit(void)
-{
-	del_gendisk(sjcd_disk);
-	put_disk(sjcd_disk);
-	release_region(sjcd_base, 4);
-	blk_cleanup_queue(sjcd_queue);
-	if ((unregister_blkdev(MAJOR_NR, "sjcd") == -EINVAL))
-		printk("SJCD: cannot unregister device.\n");
-	printk(KERN_INFO "SJCD: module: removed.\n");
-}
-
-module_init(sjcd_init);
-module_exit(sjcd_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(SANYO_CDROM_MAJOR);
diff --git a/drivers/cdrom/sjcd.h b/drivers/cdrom/sjcd.h
deleted file mode 100644
index 0aa5e714659d..000000000000
--- a/drivers/cdrom/sjcd.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Definitions for a Sanyo CD-ROM interface.
- *
- *   Copyright (C) 1995  Vadim V. Model
- *                                       model@cecmow.enet.dec.com
- *                                       vadim@rbrf.msk.su
- *                                       vadim@ipsun.ras.ru
- *                       Eric van der Maarel
- *                                       H.T.M.v.d.Maarel@marin.nl
- *
- *  This information is based on mcd.c from M. Harriss and sjcd102.lst from
- *  E. Moenkeberg.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __SJCD_H__
-#define __SJCD_H__
-
-/*
- * Change this to set the I/O port address as default. More flexibility
- * come with setup implementation.
- */
-#define SJCD_BASE_ADDR      0x340
-
-/*
- * Change this to set the irq as default. Really SANYO do not use interrupts
- * at all.
- */
-#define SJCD_INTR_NR        0
-
-/*
- * Change this to set the dma as default value. really SANYO does not use
- * direct memory access at all.
- */
-#define SJCD_DMA_NR         0
-
-/*
- * Macros which allow us to find out the status of the drive.
- */
-#define SJCD_STATUS_AVAILABLE( x ) (((x)&0x02)==0)
-#define SJCD_DATA_AVAILABLE( x )   (((x)&0x01)==0)
-
-/*
- * Port access macro. Three ports are available: S-data port (command port),
- * status port (read only) and D-data port (read only).
- */
-#define SJCDPORT( x )       ( sjcd_base + ( x ) )
-#define SJCD_STATUS_PORT    SJCDPORT( 1 )
-#define SJCD_S_DATA_PORT    SJCDPORT( 0 )
-#define SJCD_COMMAND_PORT   SJCDPORT( 0 )
-#define SJCD_D_DATA_PORT    SJCDPORT( 2 )
-
-/*
- * Drive info bits. Drive info available as first (mandatory) byte of
- * command completion status.
- */
-#define SST_NOT_READY       0x10        /* no disk in the drive (???) */
-#define SST_MEDIA_CHANGED   0x20        /* disk is changed */
-#define SST_DOOR_OPENED     0x40        /* door is open */
-
-/* commands */
-
-#define SCMD_EJECT_TRAY     0xD0        /* eject tray if not locked */
-#define SCMD_LOCK_TRAY      0xD2        /* lock tray when in */
-#define SCMD_UNLOCK_TRAY    0xD4        /* unlock tray when in */
-#define SCMD_CLOSE_TRAY     0xD6        /* load tray in */
-
-#define SCMD_RESET          0xFA        /* soft reset */
-#define SCMD_GET_STATUS     0x80
-#define SCMD_GET_VERSION    0xCC
-
-#define SCMD_DATA_READ      0xA0        /* are the same, depend on mode&args */
-#define SCMD_SEEK           0xA0
-#define SCMD_PLAY           0xA0
-
-#define SCMD_GET_QINFO      0xA8
-
-#define SCMD_SET_MODE       0xC4
-#define SCMD_MODE_PLAY      0xE0
-#define SCMD_MODE_COOKED    (0xF8 & ~0x20)
-#define SCMD_MODE_RAW       0xF9
-#define SCMD_MODE_x20_BIT   0x20        /* What is it for ? */
-
-#define SCMD_SET_VOLUME     0xAE
-#define SCMD_PAUSE          0xE0
-#define SCMD_STOP           0xE0
-
-#define SCMD_GET_DISK_INFO  0xAA
-
-/*
- * Some standard arguments for SCMD_GET_DISK_INFO.
- */
-#define SCMD_GET_1_TRACK    0xA0    /* get the first track information */
-#define SCMD_GET_L_TRACK    0xA1    /* get the last track information */
-#define SCMD_GET_D_SIZE     0xA2    /* get the whole disk information */
-
-/*
- * Borrowed from hd.c. Allows to optimize multiple port read commands.
- */
-#define S_READ_DATA( port, buf, nr )      insb( port, buf, nr )
-
-/*
- * We assume that there are no audio disks with TOC length more than this
- * number (I personally have never seen disks with more than 20 fragments).
- */
-#define SJCD_MAX_TRACKS		100
-
-struct msf {
-  unsigned char   min;
-  unsigned char   sec;
-  unsigned char   frame;
-};
-
-struct sjcd_hw_disk_info {
-  unsigned char track_control;
-  unsigned char track_no;
-  unsigned char x, y, z;
-  union {
-    unsigned char track_no;
-    struct msf track_msf;
-  } un;
-};
-
-struct sjcd_hw_qinfo {
-  unsigned char track_control;
-  unsigned char track_no;
-  unsigned char x;
-  struct msf rel;
-  struct msf abs;
-};
-
-struct sjcd_play_msf {
-  struct msf  start;
-  struct msf  end;
-};
-
-struct sjcd_disk_info {
-  unsigned char   first;
-  unsigned char   last;
-  struct msf      disk_length;
-  struct msf      first_track;
-};
-
-struct sjcd_toc {
-  unsigned char   ctrl_addr;
-  unsigned char   track;
-  unsigned char   point_index;
-  struct msf      track_time;
-  struct msf      disk_time;
-};
-
-#if defined( SJCD_GATHER_STAT )
-
-struct sjcd_stat {
-  int ticks;
-  int tticks[ 8 ];
-  int idle_ticks;
-  int start_ticks;
-  int mode_ticks;
-  int read_ticks;
-  int data_ticks;
-  int stop_ticks;
-  int stopping_ticks;
-};
-
-#endif
-
-#endif
diff --git a/drivers/cdrom/sonycd535.c b/drivers/cdrom/sonycd535.c
deleted file mode 100644
index f77ada933ea0..000000000000
--- a/drivers/cdrom/sonycd535.c
+++ /dev/null
@@ -1,1689 +0,0 @@
-/*
- * Sony CDU-535 interface device driver
- *
- * This is a modified version of the CDU-31A device driver (see below).
- * Changes were made using documentation for the CDU-531 (which Sony
- * assures me is very similar to the 535) and partial disassembly of the
- * DOS driver.  I used Minyard's driver and replaced the CDU-31A
- * commands with the CDU-531 commands.  This was complicated by a different
- * interface protocol with the drive.  The driver is still polled.
- *
- * Data transfer rate is about 110 Kb/sec, theoretical maximum is 150 Kb/sec.
- * I tried polling without the sony_sleep during the data transfers but
- * it did not speed things up any.
- *
- * 1993-05-23 (rgj) changed the major number to 21 to get rid of conflict
- * with CDU-31A driver.  This is the also the number from the Linux
- * Device Driver Registry for the Sony Drive.  Hope nobody else is using it.
- *
- * 1993-08-29 (rgj) remove the configuring of the interface board address
- * from the top level configuration, you have to modify it in this file.
- *
- * 1995-01-26 Made module-capable (Joel Katz <Stimpson@Panix.COM>)
- *
- * 1995-05-20
- *  Modified to support CDU-510/515 series
- *      (Claudio Porfiri<C.Porfiri@nisms.tei.ericsson.se>)
- *  Fixed to report verify_area() failures
- *      (Heiko Eissfeldt <heiko@colossus.escape.de>)
- *
- * 1995-06-01
- *  More changes to support CDU-510/515 series
- *      (Claudio Porfiri<C.Porfiri@nisms.tei.ericsson.se>)
- *
- * November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	            Removed init_module & cleanup_module in favor of 
- *	            module_init & module_exit.
- *                  Torben Mathiasen <tmm@image.dk>
- *
- * September 2003 - Fix SMP support by removing cli/sti calls.
- *                  Using spinlocks with a wait_queue instead.
- *                  Felipe Damasio <felipewd@terra.com.br>
- *
- * Things to do:
- *  - handle errors and status better, put everything into a single word
- *  - use interrupts (code mostly there, but a big hole still missing)
- *  - handle multi-session CDs?
- *  - use DMA?
- *
- *  Known Bugs:
- *  -
- *
- *   Ken Pizzini (ken@halcyon.com)
- *
- * Original by:
- *   Ron Jeppesen (ronj.an@site007.saic.com)
- *
- *
- *------------------------------------------------------------------------
- * Sony CDROM interface device driver.
- *
- * Corey Minyard (minyard@wf-rch.cirr.com) (CDU-535 complaints to Ken above)
- *
- * Colossians 3:17
- *
- * The Sony interface device driver handles Sony interface CDROM
- * drives and provides a complete block-level interface as well as an
- * ioctl() interface compatible with the Sun (as specified in
- * include/linux/cdrom.h).  With this interface, CDROMs can be
- * accessed and standard audio CDs can be played back normally.
- *
- * This interface is (unfortunately) a polled interface.  This is
- * because most Sony interfaces are set up with DMA and interrupts
- * disables.  Some (like mine) do not even have the capability to
- * handle interrupts or DMA.  For this reason you will see a bit of
- * the following:
- *
- *   snap = jiffies;
- *   while (jiffies-snap < SONY_JIFFIES_TIMEOUT)
- *   {
- *		if (some_condition())
- *         break;
- *      sony_sleep();
- *   }
- *   if (some_condition not met)
- *   {
- *      return an_error;
- *   }
- *
- * This ugly hack waits for something to happen, sleeping a little
- * between every try.  (The conditional is written so that jiffies
- * wrap-around is handled properly.)
- *
- * One thing about these drives: They talk in MSF (Minute Second Frame) format.
- * There are 75 frames a second, 60 seconds a minute, and up to 75 minutes on a
- * disk.  The funny thing is that these are sent to the drive in BCD, but the
- * interface wants to see them in decimal.  A lot of conversion goes on.
- *
- *  Copyright (C) 1993  Corey Minyard
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-
-# include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/hdreg.h>
-#include <linux/genhd.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#define REALLY_SLOW_IO
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <linux/cdrom.h>
-
-#define MAJOR_NR CDU535_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-#define sony535_cd_base_io sonycd535 /* for compatible parameter passing with "insmod" */
-#include "sonycd535.h"
-
-/*
- * this is the base address of the interface card for the Sony CDU-535
- * CDROM drive.  If your jumpers are set for an address other than
- * this one (the default), change the following line to the
- * proper address.
- */
-#ifndef CDU535_ADDRESS
-# define CDU535_ADDRESS			0x340
-#endif
-#ifndef CDU535_INTERRUPT
-# define CDU535_INTERRUPT		0
-#endif
-#ifndef CDU535_HANDLE
-# define CDU535_HANDLE			"cdu535"
-#endif
-#ifndef CDU535_MESSAGE_NAME
-# define CDU535_MESSAGE_NAME	"Sony CDU-535"
-#endif
-
-#define CDU535_BLOCK_SIZE	2048 
- 
-#ifndef MAX_SPINUP_RETRY
-# define MAX_SPINUP_RETRY		3	/* 1 is sufficient for most drives... */
-#endif
-#ifndef RETRY_FOR_BAD_STATUS
-# define RETRY_FOR_BAD_STATUS	100	/* in 10th of second */
-#endif
-
-#ifndef DEBUG
-# define DEBUG	1
-#endif
-
-/*
- *  SONY535_BUFFER_SIZE determines the size of internal buffer used
- *  by the drive.  It must be at least 2K and the larger the buffer
- *  the better the transfer rate.  It does however take system memory.
- *  On my system I get the following transfer rates using dd to read
- *  10 Mb off /dev/cdrom.
- *
- *    8K buffer      43 Kb/sec
- *   16K buffer      66 Kb/sec
- *   32K buffer      91 Kb/sec
- *   64K buffer     111 Kb/sec
- *  128K buffer     123 Kb/sec
- *  512K buffer     123 Kb/sec
- */
-#define SONY535_BUFFER_SIZE	(64*1024)
-
-/*
- *  if LOCK_DOORS is defined then the eject button is disabled while
- * the device is open.
- */
-#ifndef NO_LOCK_DOORS
-# define LOCK_DOORS
-#endif
-
-static int read_subcode(void);
-static void sony_get_toc(void);
-static int cdu_open(struct inode *inode, struct file *filp);
-static inline unsigned int int_to_bcd(unsigned int val);
-static unsigned int bcd_to_int(unsigned int bcd);
-static int do_sony_cmd(Byte * cmd, int nCmd, Byte status[2],
-					   Byte * response, int n_response, int ignoreStatusBit7);
-
-/* The base I/O address of the Sony Interface.  This is a variable (not a
-   #define) so it can be easily changed via some future ioctl() */
-static unsigned int sony535_cd_base_io = CDU535_ADDRESS;
-module_param(sony535_cd_base_io, int, 0);
-
-/*
- * The following are I/O addresses of the various registers for the drive.  The
- * comment for the base address also applies here.
- */
-static unsigned short select_unit_reg;
-static unsigned short result_reg;
-static unsigned short command_reg;
-static unsigned short read_status_reg;
-static unsigned short data_reg;
-
-static DEFINE_SPINLOCK(sonycd535_lock); /* queue lock */
-static struct request_queue *sonycd535_queue;
-
-static int initialized;			/* Has the drive been initialized? */
-static int sony_disc_changed = 1;	/* Has the disk been changed
-					   since the last check? */
-static int sony_toc_read;		/* Has the table of contents been
-					   read? */
-static unsigned int sony_buffer_size;	/* Size in bytes of the read-ahead
-					   buffer. */
-static unsigned int sony_buffer_sectors;	/* Size (in 2048 byte records) of
-						   the read-ahead buffer. */
-static unsigned int sony_usage;		/* How many processes have the
-					   drive open. */
-
-static int sony_first_block = -1;	/* First OS block (512 byte) in
-					   the read-ahead buffer */
-static int sony_last_block = -1;	/* Last OS block (512 byte) in
-					   the read-ahead buffer */
-
-static struct s535_sony_toc *sony_toc;	/* Points to the table of
-					   contents. */
-
-static struct s535_sony_subcode *last_sony_subcode;		/* Points to the last
-								   subcode address read */
-static Byte **sony_buffer;		/* Points to the pointers
-					   to the sector buffers */
-
-static int sony_inuse;			/* is the drive in use? Only one
-					   open at a time allowed */
-
-/*
- * The audio status uses the values from read subchannel data as specified
- * in include/linux/cdrom.h.
- */
-static int sony_audio_status = CDROM_AUDIO_NO_STATUS;
-
-/*
- * The following are a hack for pausing and resuming audio play.  The drive
- * does not work as I would expect it, if you stop it then start it again,
- * the drive seeks back to the beginning and starts over.  This holds the
- * position during a pause so a resume can restart it.  It uses the
- * audio status variable above to tell if it is paused.
- *   I just kept the CDU-31A driver behavior rather than using the PAUSE
- * command on the CDU-535.
- */
-static Byte cur_pos_msf[3];
-static Byte final_pos_msf[3];
-
-/* What IRQ is the drive using?  0 if none. */
-static int sony535_irq_used = CDU535_INTERRUPT;
-
-/* The interrupt handler will wake this queue up when it gets an interrupt. */
-static DECLARE_WAIT_QUEUE_HEAD(cdu535_irq_wait);
-
-
-/*
- * This routine returns 1 if the disk has been changed since the last
- * check or 0 if it hasn't.  Setting flag to 0 resets the changed flag.
- */
-static int
-cdu535_check_media_change(struct gendisk *disk)
-{
-	/* if driver is not initialized, always return 0 */
-	int retval = initialized ? sony_disc_changed : 0;
-	sony_disc_changed = 0;
-	return retval;
-}
-
-static inline void
-enable_interrupts(void)
-{
-#ifdef USE_IRQ
-	/*
-	 * This code was taken from cdu31a.c; it will not
-	 * directly work for the cdu535 as written...
-	 */
-	curr_control_reg |= ( SONY_ATTN_INT_EN_BIT
-						| SONY_RES_RDY_INT_EN_BIT
-						| SONY_DATA_RDY_INT_EN_BIT);
-	outb(curr_control_reg, sony_cd_control_reg);
-#endif
-}
-
-static inline void
-disable_interrupts(void)
-{
-#ifdef USE_IRQ
-	/*
-	 * This code was taken from cdu31a.c; it will not
-	 * directly work for the cdu535 as written...
-	 */
-	curr_control_reg &= ~(SONY_ATTN_INT_EN_BIT
-						| SONY_RES_RDY_INT_EN_BIT
-						| SONY_DATA_RDY_INT_EN_BIT);
-	outb(curr_control_reg, sony_cd_control_reg);
-#endif
-}
-
-static irqreturn_t
-cdu535_interrupt(int irq, void *dev_id)
-{
-	disable_interrupts();
-	if (waitqueue_active(&cdu535_irq_wait)) {
-		wake_up(&cdu535_irq_wait);
-		return IRQ_HANDLED;
-	}
-	printk(CDU535_MESSAGE_NAME
-			": Got an interrupt but nothing was waiting\n");
-	return IRQ_NONE;
-}
-
-
-/*
- * Wait a little while.
- */
-static inline void
-sony_sleep(void)
-{
-	if (sony535_irq_used <= 0) {	/* poll */
-		yield();
-	} else {	/* Interrupt driven */
-		DEFINE_WAIT(wait);
-		
-		spin_lock_irq(&sonycd535_lock);
-		enable_interrupts();
-		prepare_to_wait(&cdu535_irq_wait, &wait, TASK_INTERRUPTIBLE);
-		spin_unlock_irq(&sonycd535_lock);
-		schedule();
-		finish_wait(&cdu535_irq_wait, &wait);
-	}
-}
-
-/*------------------start of SONY CDU535 very specific ---------------------*/
-
-/****************************************************************************
- * void select_unit( int unit_no )
- *
- *  Select the specified unit (0-3) so that subsequent commands reference it
- ****************************************************************************/
-static void
-select_unit(int unit_no)
-{
-	unsigned int select_mask = ~(1 << unit_no);
-	outb(select_mask, select_unit_reg);
-}
-
-/***************************************************************************
- * int read_result_reg( Byte *data_ptr )
- *
- *  Read a result byte from the Sony CDU controller, store in location pointed
- * to by data_ptr.  Return zero on success, TIME_OUT if we did not receive
- * data.
- ***************************************************************************/
-static int
-read_result_reg(Byte *data_ptr)
-{
-	unsigned long snap;
-	int read_status;
-
-	snap = jiffies;
-	while (jiffies-snap < SONY_JIFFIES_TIMEOUT) {
-		read_status = inb(read_status_reg);
-		if ((read_status & SONY535_RESULT_NOT_READY_BIT) == 0) {
-#if DEBUG > 1
-			printk(CDU535_MESSAGE_NAME
-					": read_result_reg(): readStatReg = 0x%x\n", read_status);
-#endif
-			*data_ptr = inb(result_reg);
-			return 0;
-		} else {
-			sony_sleep();
-		}
-	}
-	printk(CDU535_MESSAGE_NAME " read_result_reg: TIME OUT!\n");
-	return TIME_OUT;
-}
-
-/****************************************************************************
- * int read_exec_status( Byte status[2] )
- *
- *  Read the execution status of the last command and put into status.
- * Handles reading second status word if available.  Returns 0 on success,
- * TIME_OUT on failure.
- ****************************************************************************/
-static int
-read_exec_status(Byte status[2])
-{
-	status[1] = 0;
-	if (read_result_reg(&(status[0])) != 0)
-		return TIME_OUT;
-	if ((status[0] & 0x80) != 0) {	/* byte two follows */
-		if (read_result_reg(&(status[1])) != 0)
-			return TIME_OUT;
-	}
-#if DEBUG > 1
-	printk(CDU535_MESSAGE_NAME ": read_exec_status: read 0x%x 0x%x\n",
-			status[0], status[1]);
-#endif
-	return 0;
-}
-
-/****************************************************************************
- * int check_drive_status( void )
- *
- *  Check the current drive status.  Using this before executing a command
- * takes care of the problem of unsolicited drive status-2 messages.
- * Add a check of the audio status if we think the disk is playing.
- ****************************************************************************/
-static int
-check_drive_status(void)
-{
-	Byte status, e_status[2];
-	int  CDD, ATN;
-	Byte cmd;
-
-	select_unit(0);
-	if (sony_audio_status == CDROM_AUDIO_PLAY) {	/* check status */
-		outb(SONY535_REQUEST_AUDIO_STATUS, command_reg);
-		if (read_result_reg(&status) == 0) {
-			switch (status) {
-			case 0x0:
-				break;		/* play in progress */
-			case 0x1:
-				break;		/* paused */
-			case 0x3:		/* audio play completed */
-			case 0x5:		/* play not requested */
-				sony_audio_status = CDROM_AUDIO_COMPLETED;
-				read_subcode();
-				break;
-			case 0x4:		/* error during play */
-				sony_audio_status = CDROM_AUDIO_ERROR;
-				break;
-			}
-		}
-	}
-	/* now check drive status */
-	outb(SONY535_REQUEST_DRIVE_STATUS_2, command_reg);
-	if (read_result_reg(&status) != 0)
-		return TIME_OUT;
-
-#if DEBUG > 1
-	printk(CDU535_MESSAGE_NAME ": check_drive_status() got 0x%x\n", status);
-#endif
-
-	if (status == 0)
-		return 0;
-
-	ATN = status & 0xf;
-	CDD = (status >> 4) & 0xf;
-
-	switch (ATN) {
-	case 0x0:
-		break;					/* go on to CDD stuff */
-	case SONY535_ATN_BUSY:
-		if (initialized)
-			printk(CDU535_MESSAGE_NAME " error: drive busy\n");
-		return CD_BUSY;
-	case SONY535_ATN_EJECT_IN_PROGRESS:
-		printk(CDU535_MESSAGE_NAME " error: eject in progress\n");
-		sony_audio_status = CDROM_AUDIO_INVALID;
-		return CD_BUSY;
-	case SONY535_ATN_RESET_OCCURRED:
-	case SONY535_ATN_DISC_CHANGED:
-	case SONY535_ATN_RESET_AND_DISC_CHANGED:
-#if DEBUG > 0
-		printk(CDU535_MESSAGE_NAME " notice: reset occurred or disc changed\n");
-#endif
-		sony_disc_changed = 1;
-		sony_toc_read = 0;
-		sony_audio_status = CDROM_AUDIO_NO_STATUS;
-		sony_first_block = -1;
-		sony_last_block = -1;
-		if (initialized) {
-			cmd = SONY535_SPIN_UP;
-			do_sony_cmd(&cmd, 1, e_status, NULL, 0, 0);
-			sony_get_toc();
-		}
-		return 0;
-	default:
-		printk(CDU535_MESSAGE_NAME " error: drive busy (ATN=0x%x)\n", ATN);
-		return CD_BUSY;
-	}
-	switch (CDD) {			/* the 531 docs are not helpful in decoding this */
-	case 0x0:				/* just use the values from the DOS driver */
-	case 0x2:
-	case 0xa:
-		break;				/* no error */
-	case 0xc:
-		printk(CDU535_MESSAGE_NAME
-				": check_drive_status(): CDD = 0xc! Not properly handled!\n");
-		return CD_BUSY;		/* ? */
-	default:
-		return CD_BUSY;
-	}
-	return 0;
-}	/* check_drive_status() */
-
-/*****************************************************************************
- * int do_sony_cmd( Byte *cmd, int n_cmd, Byte status[2],
- *                Byte *response, int n_response, int ignore_status_bit7 )
- *
- *  Generic routine for executing commands.  The command and its parameters
- *  should be placed in the cmd[] array, number of bytes in the command is
- *  stored in nCmd.  The response from the command will be stored in the
- *  response array.  The number of bytes you expect back (excluding status)
- *  should be passed in n_response.  Finally, some
- *  commands set bit 7 of the return status even when there is no second
- *  status byte, on these commands set ignoreStatusBit7 TRUE.
- *    If the command was sent and data received back, then we return 0,
- *  else we return TIME_OUT.  You still have to check the status yourself.
- *    You should call check_drive_status() before calling this routine
- *  so that you do not lose notifications of disk changes, etc.
- ****************************************************************************/
-static int
-do_sony_cmd(Byte * cmd, int n_cmd, Byte status[2],
-			Byte * response, int n_response, int ignore_status_bit7)
-{
-	int i;
-
-	/* write out the command */
-	for (i = 0; i < n_cmd; i++)
-		outb(cmd[i], command_reg);
-
-	/* read back the status */
-	if (read_result_reg(status) != 0)
-		return TIME_OUT;
-	if (!ignore_status_bit7 && ((status[0] & 0x80) != 0)) {
-		/* get second status byte */
-		if (read_result_reg(status + 1) != 0)
-			return TIME_OUT;
-	} else {
-		status[1] = 0;
-	}
-#if DEBUG > 2
-	printk(CDU535_MESSAGE_NAME ": do_sony_cmd %x: %x %x\n",
-			*cmd, status[0], status[1]);
-#endif
-
-	/* do not know about when I should read set of data and when not to */
-	if ((status[0] & ((ignore_status_bit7 ? 0x7f : 0xff) & 0x8f)) != 0)
-		return 0;
-
-	/* else, read in rest of data */
-	for (i = 0; 0 < n_response; n_response--, i++)
-		if (read_result_reg(response + i) != 0)
-			return TIME_OUT;
-	return 0;
-}	/* do_sony_cmd() */
-
-/**************************************************************************
- * int set_drive_mode( int mode, Byte status[2] )
- *
- *  Set the drive mode to the specified value (mode=0 is audio, mode=e0
- * is mode-1 CDROM
- **************************************************************************/
-static int
-set_drive_mode(int mode, Byte status[2])
-{
-	Byte cmd_buff[2];
-	Byte ret_buff[1];
-
-	cmd_buff[0] = SONY535_SET_DRIVE_MODE;
-	cmd_buff[1] = mode;
-	return do_sony_cmd(cmd_buff, 2, status, ret_buff, 1, 1);
-}
-
-/***************************************************************************
- * int seek_and_read_N_blocks( Byte params[], int n_blocks, Byte status[2],
- *                             Byte *data_buff, int buff_size )
- *
- *  Read n_blocks of data from the CDROM starting at position params[0:2],
- *  number of blocks in stored in params[3:5] -- both these are already
- *  int bcd format.
- *  Transfer the data into the buffer pointed at by data_buff.  buff_size
- *  gives the number of bytes available in the buffer.
- *    The routine returns number of bytes read in if successful, otherwise
- *  it returns one of the standard error returns.
- ***************************************************************************/
-static int
-seek_and_read_N_blocks(Byte params[], int n_blocks, Byte status[2],
-					   Byte **buff, int buf_size)
-{
-	Byte cmd_buff[7];
-	int  i;
-	int  read_status;
-	unsigned long snap;
-	Byte *data_buff;
-	int  sector_count = 0;
-
-	if (buf_size < CDU535_BLOCK_SIZE * n_blocks)
-		return NO_ROOM;
-
-	set_drive_mode(SONY535_CDROM_DRIVE_MODE, status);
-
-	/* send command to read the data */
-	cmd_buff[0] = SONY535_SEEK_AND_READ_N_BLOCKS_1;
-	for (i = 0; i < 6; i++)
-		cmd_buff[i + 1] = params[i];
-	for (i = 0; i < 7; i++)
-		outb(cmd_buff[i], command_reg);
-
-	/* read back the data one block at a time */
-	while (0 < n_blocks--) {
-		/* wait for data to be ready */
-		int data_valid = 0;
-		snap = jiffies;
-		while (jiffies-snap < SONY_JIFFIES_TIMEOUT) {
-			read_status = inb(read_status_reg);
-			if ((read_status & SONY535_RESULT_NOT_READY_BIT) == 0) {
-				read_exec_status(status);
-				return BAD_STATUS;
-			}
-			if ((read_status & SONY535_DATA_NOT_READY_BIT) == 0) {
-				/* data is ready, read it */
-				data_buff = buff[sector_count++];
-				for (i = 0; i < CDU535_BLOCK_SIZE; i++)
-					*data_buff++ = inb(data_reg);	/* unrolling this loop does not seem to help */
-				data_valid = 1;
-				break;			/* exit the timeout loop */
-			}
-			sony_sleep();		/* data not ready, sleep a while */
-		}
-		if (!data_valid)
-			return TIME_OUT;	/* if we reach this stage */
-	}
-
-	/* read all the data, now read the status */
-	if ((i = read_exec_status(status)) != 0)
-		return i;
-	return CDU535_BLOCK_SIZE * sector_count;
-}	/* seek_and_read_N_blocks() */
-
-/****************************************************************************
- * int request_toc_data( Byte status[2], struct s535_sony_toc *toc )
- *
- *  Read in the table of contents data.  Converts all the bcd data
- * into integers in the toc structure.
- ****************************************************************************/
-static int
-request_toc_data(Byte status[2], struct s535_sony_toc *toc)
-{
-	int  to_status;
-	int  i, j, n_tracks, track_no;
-	int  first_track_num, last_track_num;
-	Byte cmd_no = 0xb2;
-	Byte track_address_buffer[5];
-
-	/* read the fixed portion of the table of contents */
-	if ((to_status = do_sony_cmd(&cmd_no, 1, status, (Byte *) toc, 15, 1)) != 0)
-		return to_status;
-
-	/* convert the data into integers so we can use them */
-	first_track_num = bcd_to_int(toc->first_track_num);
-	last_track_num = bcd_to_int(toc->last_track_num);
-	n_tracks = last_track_num - first_track_num + 1;
-
-	/* read each of the track address descriptors */
-	for (i = 0; i < n_tracks; i++) {
-		/* read the descriptor into a temporary buffer */
-		for (j = 0; j < 5; j++) {
-			if (read_result_reg(track_address_buffer + j) != 0)
-				return TIME_OUT;
-			if (j == 1)		/* need to convert from bcd */
-				track_no = bcd_to_int(track_address_buffer[j]);
-		}
-		/* copy the descriptor to proper location - sonycd.c just fills */
-		memcpy(toc->tracks + i, track_address_buffer, 5);
-	}
-	return 0;
-}	/* request_toc_data() */
-
-/***************************************************************************
- * int spin_up_drive( Byte status[2] )
- *
- *  Spin up the drive (unless it is already spinning).
- ***************************************************************************/
-static int
-spin_up_drive(Byte status[2])
-{
-	Byte cmd;
-
-	/* first see if the drive is already spinning */
-	cmd = SONY535_REQUEST_DRIVE_STATUS_1;
-	if (do_sony_cmd(&cmd, 1, status, NULL, 0, 0) != 0)
-		return TIME_OUT;
-	if ((status[0] & SONY535_STATUS1_NOT_SPINNING) == 0)
-		return 0;	/* it's already spinning */
-
-	/* otherwise, give the spin-up command */
-	cmd = SONY535_SPIN_UP;
-	return do_sony_cmd(&cmd, 1, status, NULL, 0, 0);
-}
-
-/*--------------------end of SONY CDU535 very specific ---------------------*/
-
-/* Convert from an integer 0-99 to BCD */
-static inline unsigned int
-int_to_bcd(unsigned int val)
-{
-	int retval;
-
-	retval = (val / 10) << 4;
-	retval = retval | val % 10;
-	return retval;
-}
-
-
-/* Convert from BCD to an integer from 0-99 */
-static unsigned int
-bcd_to_int(unsigned int bcd)
-{
-	return (((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f);
-}
-
-
-/*
- * Convert a logical sector value (like the OS would want to use for
- * a block device) to an MSF format.
- */
-static void
-log_to_msf(unsigned int log, Byte *msf)
-{
-	log = log + LOG_START_OFFSET;
-	msf[0] = int_to_bcd(log / 4500);
-	log = log % 4500;
-	msf[1] = int_to_bcd(log / 75);
-	msf[2] = int_to_bcd(log % 75);
-}
-
-
-/*
- * Convert an MSF format to a logical sector.
- */
-static unsigned int
-msf_to_log(Byte *msf)
-{
-	unsigned int log;
-
-
-	log = bcd_to_int(msf[2]);
-	log += bcd_to_int(msf[1]) * 75;
-	log += bcd_to_int(msf[0]) * 4500;
-	log = log - LOG_START_OFFSET;
-
-	return log;
-}
-
-
-/*
- * Take in integer size value and put it into a buffer like
- * the drive would want to see a number-of-sector value.
- */
-static void
-size_to_buf(unsigned int size, Byte *buf)
-{
-	buf[0] = size / 65536;
-	size = size % 65536;
-	buf[1] = size / 256;
-	buf[2] = size % 256;
-}
-
-
-/*
- * The OS calls this to perform a read or write operation to the drive.
- * Write obviously fail.  Reads to a read ahead of sony_buffer_size
- * bytes to help speed operations.  This especially helps since the OS
- * may use 1024 byte blocks and the drive uses 2048 byte blocks.  Since most
- * data access on a CD is done sequentially, this saves a lot of operations.
- */
-static void
-do_cdu535_request(request_queue_t * q)
-{
-	struct request *req;
-	unsigned int read_size;
-	int  block;
-	int  nsect;
-	int  copyoff;
-	int  spin_up_retry;
-	Byte params[10];
-	Byte status[2];
-	Byte cmd[2];
-
-	while (1) {
-		req = elv_next_request(q);
-		if (!req)
-			return;
-
-		block = req->sector;
-		nsect = req->nr_sectors;
-		if (!blk_fs_request(req)) {
-			end_request(req, 0);
-			continue;
-		}
-		if (rq_data_dir(req) == WRITE) {
-			end_request(req, 0);
-			continue;
-		}
-		/*
-		 * If the block address is invalid or the request goes beyond
-		 * the end of the media, return an error.
-		 */
-		if (sony_toc->lead_out_start_lba <= (block/4)) {
-			end_request(req, 0);
-			return;
-		}
-		if (sony_toc->lead_out_start_lba <= ((block + nsect) / 4)) {
-			end_request(req, 0);
-			return;
-		}
-		while (0 < nsect) {
-			/*
-			 * If the requested sector is not currently in
-			 * the read-ahead buffer, it must be read in.
-			 */
-			if ((block < sony_first_block) || (sony_last_block < block)) {
-				sony_first_block = (block / 4) * 4;
-				log_to_msf(block / 4, params);
-				
-				/*
-				 * If the full read-ahead would go beyond the end of the media, trim
-				 * it back to read just till the end of the media.
-				 */
-				if (sony_toc->lead_out_start_lba <= ((block / 4) + sony_buffer_sectors)) {
-					sony_last_block = (sony_toc->lead_out_start_lba * 4) - 1;
-					read_size = sony_toc->lead_out_start_lba - (block / 4);
-				} else {
-					sony_last_block = sony_first_block + (sony_buffer_sectors * 4) - 1;
-					read_size = sony_buffer_sectors;
-				}
-				size_to_buf(read_size, &params[3]);
-				
-				/*
-				 * Read the data.  If the drive was not spinning,
-				 * spin it up and try some more.
-				 */
-				for (spin_up_retry=0 ;; ++spin_up_retry) {
-					/* This loop has been modified to support the Sony
-					 * CDU-510/515 series, thanks to Claudio Porfiri 
-					 * <C.Porfiri@nisms.tei.ericsson.se>.
-					 */
-					/*
-					 * This part is to deal with very slow hardware.  We
-					 * try at most MAX_SPINUP_RETRY times to read the same
-					 * block.  A check for seek_and_read_N_blocks' result is
-					 * performed; if the result is wrong, the CDROM's engine
-					 * is restarted and the operation is tried again.
-					 */
-					/*
-					 * 1995-06-01: The system got problems when downloading
-					 * from Slackware CDROM, the problem seems to be:
-					 * seek_and_read_N_blocks returns BAD_STATUS and we
-					 * should wait for a while before retrying, so a new
-					 * part was added to discriminate the return value from
-					 * seek_and_read_N_blocks for the various cases.
-					 */
-					int readStatus = seek_and_read_N_blocks(params, read_size,
-										status, sony_buffer, (read_size * CDU535_BLOCK_SIZE));
-					if (0 <= readStatus)	/* Good data; common case, placed first */
-						break;
-					if (readStatus == NO_ROOM || spin_up_retry == MAX_SPINUP_RETRY) {
-						/* give up */
-						if (readStatus == NO_ROOM)
-							printk(CDU535_MESSAGE_NAME " No room to read from CD\n");
-						else
-							printk(CDU535_MESSAGE_NAME " Read error: 0x%.2x\n",
-							       status[0]);
-						sony_first_block = -1;
-						sony_last_block = -1;
-						end_request(req, 0);
-						return;
-					}
-					if (readStatus == BAD_STATUS) {
-						/* Sleep for a while, then retry */
-						set_current_state(TASK_INTERRUPTIBLE);
-						spin_unlock_irq(&sonycd535_lock);
-						schedule_timeout(RETRY_FOR_BAD_STATUS*HZ/10);
-						spin_lock_irq(&sonycd535_lock);
-					}
-#if DEBUG > 0
-					printk(CDU535_MESSAGE_NAME
-					       " debug: calling spin up when reading data!\n");
-#endif
-					cmd[0] = SONY535_SPIN_UP;
-					do_sony_cmd(cmd, 1, status, NULL, 0, 0);
-				}
-			}
-			/*
-			 * The data is in memory now, copy it to the buffer and advance to the
-			 * next block to read.
-			 */
-			copyoff = block - sony_first_block;
-			memcpy(req->buffer,
-			       sony_buffer[copyoff / 4] + 512 * (copyoff % 4), 512);
-			
-			block += 1;
-			nsect -= 1;
-			req->buffer += 512;
-		}
-
-		end_request(req, 1);
-	}
-}
-
-/*
- * Read the table of contents from the drive and set sony_toc_read if
- * successful.
- */
-static void
-sony_get_toc(void)
-{
-	Byte status[2];
-	if (!sony_toc_read) {
-		/* do not call check_drive_status() from here since it can call this routine */
-		if (request_toc_data(status, sony_toc) < 0)
-			return;
-		sony_toc->lead_out_start_lba = msf_to_log(sony_toc->lead_out_start_msf);
-		sony_toc_read = 1;
-	}
-}
-
-
-/*
- * Search for a specific track in the table of contents.  track is
- * passed in bcd format
- */
-static int
-find_track(int track)
-{
-	int i;
-	int num_tracks;
-
-
-	num_tracks = bcd_to_int(sony_toc->last_track_num) -
-		bcd_to_int(sony_toc->first_track_num) + 1;
-	for (i = 0; i < num_tracks; i++) {
-		if (sony_toc->tracks[i].track == track) {
-			return i;
-		}
-	}
-
-	return -1;
-}
-
-/*
- * Read the subcode and put it int last_sony_subcode for future use.
- */
-static int
-read_subcode(void)
-{
-	Byte cmd = SONY535_REQUEST_SUB_Q_DATA;
-	Byte status[2];
-	int  dsc_status;
-
-	if (check_drive_status() != 0)
-		return -EIO;
-
-	if ((dsc_status = do_sony_cmd(&cmd, 1, status, (Byte *) last_sony_subcode,
-							   sizeof(struct s535_sony_subcode), 1)) != 0) {
-		printk(CDU535_MESSAGE_NAME " error 0x%.2x, %d (read_subcode)\n",
-				status[0], dsc_status);
-		return -EIO;
-	}
-	return 0;
-}
-
-
-/*
- * Get the subchannel info like the CDROMSUBCHNL command wants to see it.  If
- * the drive is playing, the subchannel needs to be read (since it would be
- * changing).  If the drive is paused or completed, the subcode information has
- * already been stored, just use that.  The ioctl call wants things in decimal
- * (not BCD), so all the conversions are done.
- */
-static int
-sony_get_subchnl_info(void __user *arg)
-{
-	struct cdrom_subchnl schi;
-
-	/* Get attention stuff */
-	if (check_drive_status() != 0)
-		return -EIO;
-
-	sony_get_toc();
-	if (!sony_toc_read) {
-		return -EIO;
-	}
-	if (copy_from_user(&schi, arg, sizeof schi))
-		return -EFAULT;
-
-	switch (sony_audio_status) {
-	case CDROM_AUDIO_PLAY:
-		if (read_subcode() < 0) {
-			return -EIO;
-		}
-		break;
-
-	case CDROM_AUDIO_PAUSED:
-	case CDROM_AUDIO_COMPLETED:
-		break;
-
-	case CDROM_AUDIO_NO_STATUS:
-		schi.cdsc_audiostatus = sony_audio_status;
-		if (copy_to_user(arg, &schi, sizeof schi))
-			return -EFAULT;
-		return 0;
-		break;
-
-	case CDROM_AUDIO_INVALID:
-	case CDROM_AUDIO_ERROR:
-	default:
-		return -EIO;
-	}
-
-	schi.cdsc_audiostatus = sony_audio_status;
-	schi.cdsc_adr = last_sony_subcode->address;
-	schi.cdsc_ctrl = last_sony_subcode->control;
-	schi.cdsc_trk = bcd_to_int(last_sony_subcode->track_num);
-	schi.cdsc_ind = bcd_to_int(last_sony_subcode->index_num);
-	if (schi.cdsc_format == CDROM_MSF) {
-		schi.cdsc_absaddr.msf.minute = bcd_to_int(last_sony_subcode->abs_msf[0]);
-		schi.cdsc_absaddr.msf.second = bcd_to_int(last_sony_subcode->abs_msf[1]);
-		schi.cdsc_absaddr.msf.frame = bcd_to_int(last_sony_subcode->abs_msf[2]);
-
-		schi.cdsc_reladdr.msf.minute = bcd_to_int(last_sony_subcode->rel_msf[0]);
-		schi.cdsc_reladdr.msf.second = bcd_to_int(last_sony_subcode->rel_msf[1]);
-		schi.cdsc_reladdr.msf.frame = bcd_to_int(last_sony_subcode->rel_msf[2]);
-	} else if (schi.cdsc_format == CDROM_LBA) {
-		schi.cdsc_absaddr.lba = msf_to_log(last_sony_subcode->abs_msf);
-		schi.cdsc_reladdr.lba = msf_to_log(last_sony_subcode->rel_msf);
-	}
-	return copy_to_user(arg, &schi, sizeof schi) ? -EFAULT : 0;
-}
-
-
-/*
- * The big ugly ioctl handler.
- */
-static int
-cdu_ioctl(struct inode *inode,
-		  struct file *file,
-		  unsigned int cmd,
-		  unsigned long arg)
-{
-	Byte status[2];
-	Byte cmd_buff[10], params[10];
-	int  i;
-	int  dsc_status;
-	void __user *argp = (void __user *)arg;
-
-	if (check_drive_status() != 0)
-		return -EIO;
-
-	switch (cmd) {
-	case CDROMSTART:			/* Spin up the drive */
-		if (spin_up_drive(status) < 0) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTART)\n",
-					status[0]);
-			return -EIO;
-		}
-		return 0;
-		break;
-
-	case CDROMSTOP:			/* Spin down the drive */
-		cmd_buff[0] = SONY535_HOLD;
-		do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-
-		/*
-		 * Spin the drive down, ignoring the error if the disk was
-		 * already not spinning.
-		 */
-		sony_audio_status = CDROM_AUDIO_NO_STATUS;
-		cmd_buff[0] = SONY535_SPIN_DOWN;
-		dsc_status = do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-		if (((dsc_status < 0) && (dsc_status != BAD_STATUS)) ||
-			((status[0] & ~(SONY535_STATUS1_NOT_SPINNING)) != 0)) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTOP)\n",
-					status[0]);
-			return -EIO;
-		}
-		return 0;
-		break;
-
-	case CDROMPAUSE:			/* Pause the drive */
-		cmd_buff[0] = SONY535_HOLD;		/* CDU-31 driver uses AUDIO_STOP, not pause */
-		if (do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0) != 0) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPAUSE)\n",
-					status[0]);
-			return -EIO;
-		}
-		/* Get the current position and save it for resuming */
-		if (read_subcode() < 0) {
-			return -EIO;
-		}
-		cur_pos_msf[0] = last_sony_subcode->abs_msf[0];
-		cur_pos_msf[1] = last_sony_subcode->abs_msf[1];
-		cur_pos_msf[2] = last_sony_subcode->abs_msf[2];
-		sony_audio_status = CDROM_AUDIO_PAUSED;
-		return 0;
-		break;
-
-	case CDROMRESUME:			/* Start the drive after being paused */
-		set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status);
-
-		if (sony_audio_status != CDROM_AUDIO_PAUSED) {
-			return -EINVAL;
-		}
-		spin_up_drive(status);
-
-		/* Start the drive at the saved position. */
-		cmd_buff[0] = SONY535_PLAY_AUDIO;
-		cmd_buff[1] = 0;		/* play back starting at this address */
-		cmd_buff[2] = cur_pos_msf[0];
-		cmd_buff[3] = cur_pos_msf[1];
-		cmd_buff[4] = cur_pos_msf[2];
-		cmd_buff[5] = SONY535_PLAY_AUDIO;
-		cmd_buff[6] = 2;		/* set ending address */
-		cmd_buff[7] = final_pos_msf[0];
-		cmd_buff[8] = final_pos_msf[1];
-		cmd_buff[9] = final_pos_msf[2];
-		if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) ||
-			(do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMRESUME)\n",
-					status[0]);
-			return -EIO;
-		}
-		sony_audio_status = CDROM_AUDIO_PLAY;
-		return 0;
-		break;
-
-	case CDROMPLAYMSF:			/* Play starting at the given MSF address. */
-		if (copy_from_user(params, argp, 6))
-			return -EFAULT;
-		spin_up_drive(status);
-		set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status);
-
-		/* The parameters are given in int, must be converted */
-		for (i = 0; i < 3; i++) {
-			cmd_buff[2 + i] = int_to_bcd(params[i]);
-			cmd_buff[7 + i] = int_to_bcd(params[i + 3]);
-		}
-		cmd_buff[0] = SONY535_PLAY_AUDIO;
-		cmd_buff[1] = 0;		/* play back starting at this address */
-		/* cmd_buff[2-4] are filled in for loop above */
-		cmd_buff[5] = SONY535_PLAY_AUDIO;
-		cmd_buff[6] = 2;		/* set ending address */
-		/* cmd_buff[7-9] are filled in for loop above */
-		if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) ||
-			(do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYMSF)\n",
-					status[0]);
-			return -EIO;
-		}
-		/* Save the final position for pauses and resumes */
-		final_pos_msf[0] = cmd_buff[7];
-		final_pos_msf[1] = cmd_buff[8];
-		final_pos_msf[2] = cmd_buff[9];
-		sony_audio_status = CDROM_AUDIO_PLAY;
-		return 0;
-		break;
-
-	case CDROMREADTOCHDR:		/* Read the table of contents header */
-		{
-			struct cdrom_tochdr __user *hdr = argp;
-			struct cdrom_tochdr loc_hdr;
-
-			sony_get_toc();
-			if (!sony_toc_read)
-				return -EIO;
-			loc_hdr.cdth_trk0 = bcd_to_int(sony_toc->first_track_num);
-			loc_hdr.cdth_trk1 = bcd_to_int(sony_toc->last_track_num);
-			if (copy_to_user(hdr, &loc_hdr, sizeof *hdr))
-				return -EFAULT;
-		}
-		return 0;
-		break;
-
-	case CDROMREADTOCENTRY:	/* Read a given table of contents entry */
-		{
-			struct cdrom_tocentry __user *entry = argp;
-			struct cdrom_tocentry loc_entry;
-			int  track_idx;
-			Byte *msf_val = NULL;
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				return -EIO;
-			}
-
-			if (copy_from_user(&loc_entry, entry, sizeof loc_entry))
-				return -EFAULT;
-
-			/* Lead out is handled separately since it is special. */
-			if (loc_entry.cdte_track == CDROM_LEADOUT) {
-				loc_entry.cdte_adr = 0 /*sony_toc->address2 */ ;
-				loc_entry.cdte_ctrl = sony_toc->control2;
-				msf_val = sony_toc->lead_out_start_msf;
-			} else {
-				track_idx = find_track(int_to_bcd(loc_entry.cdte_track));
-				if (track_idx < 0)
-					return -EINVAL;
-				loc_entry.cdte_adr = 0 /*sony_toc->tracks[track_idx].address */ ;
-				loc_entry.cdte_ctrl = sony_toc->tracks[track_idx].control;
-				msf_val = sony_toc->tracks[track_idx].track_start_msf;
-			}
-
-			/* Logical buffer address or MSF format requested? */
-			if (loc_entry.cdte_format == CDROM_LBA) {
-				loc_entry.cdte_addr.lba = msf_to_log(msf_val);
-			} else if (loc_entry.cdte_format == CDROM_MSF) {
-				loc_entry.cdte_addr.msf.minute = bcd_to_int(*msf_val);
-				loc_entry.cdte_addr.msf.second = bcd_to_int(*(msf_val + 1));
-				loc_entry.cdte_addr.msf.frame = bcd_to_int(*(msf_val + 2));
-			}
-			if (copy_to_user(entry, &loc_entry, sizeof *entry))
-				return -EFAULT;
-		}
-		return 0;
-		break;
-
-	case CDROMPLAYTRKIND:		/* Play a track.  This currently ignores index. */
-		{
-			struct cdrom_ti ti;
-			int track_idx;
-
-			sony_get_toc();
-			if (!sony_toc_read)
-				return -EIO;
-
-			if (copy_from_user(&ti, argp, sizeof ti))
-				return -EFAULT;
-			if ((ti.cdti_trk0 < sony_toc->first_track_num)
-				|| (sony_toc->last_track_num < ti.cdti_trk0)
-				|| (ti.cdti_trk1 < ti.cdti_trk0)) {
-				return -EINVAL;
-			}
-			track_idx = find_track(int_to_bcd(ti.cdti_trk0));
-			if (track_idx < 0)
-				return -EINVAL;
-			params[1] = sony_toc->tracks[track_idx].track_start_msf[0];
-			params[2] = sony_toc->tracks[track_idx].track_start_msf[1];
-			params[3] = sony_toc->tracks[track_idx].track_start_msf[2];
-			/*
-			 * If we want to stop after the last track, use the lead-out
-			 * MSF to do that.
-			 */
-			if (bcd_to_int(sony_toc->last_track_num) <= ti.cdti_trk1) {
-				log_to_msf(msf_to_log(sony_toc->lead_out_start_msf) - 1,
-						   &(params[4]));
-			} else {
-				track_idx = find_track(int_to_bcd(ti.cdti_trk1 + 1));
-				if (track_idx < 0)
-					return -EINVAL;
-				log_to_msf(msf_to_log(sony_toc->tracks[track_idx].track_start_msf) - 1,
-						   &(params[4]));
-			}
-			params[0] = 0x03;
-
-			spin_up_drive(status);
-
-			set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status);
-
-			/* Start the drive at the saved position. */
-			cmd_buff[0] = SONY535_PLAY_AUDIO;
-			cmd_buff[1] = 0;	/* play back starting at this address */
-			cmd_buff[2] = params[1];
-			cmd_buff[3] = params[2];
-			cmd_buff[4] = params[3];
-			cmd_buff[5] = SONY535_PLAY_AUDIO;
-			cmd_buff[6] = 2;	/* set ending address */
-			cmd_buff[7] = params[4];
-			cmd_buff[8] = params[5];
-			cmd_buff[9] = params[6];
-			if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) ||
-				(do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) {
-				printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYTRKIND)\n",
-						status[0]);
-				printk("... Params: %x %x %x %x %x %x %x\n",
-						params[0], params[1], params[2],
-						params[3], params[4], params[5], params[6]);
-				return -EIO;
-			}
-			/* Save the final position for pauses and resumes */
-			final_pos_msf[0] = params[4];
-			final_pos_msf[1] = params[5];
-			final_pos_msf[2] = params[6];
-			sony_audio_status = CDROM_AUDIO_PLAY;
-			return 0;
-		}
-
-	case CDROMSUBCHNL:			/* Get subchannel info */
-		return sony_get_subchnl_info(argp);
-
-	case CDROMVOLCTRL:			/* Volume control.  What volume does this change, anyway? */
-		{
-			struct cdrom_volctrl volctrl;
-
-			if (copy_from_user(&volctrl, argp, sizeof volctrl))
-				return -EFAULT;
-			cmd_buff[0] = SONY535_SET_VOLUME;
-			cmd_buff[1] = volctrl.channel0;
-			cmd_buff[2] = volctrl.channel1;
-			if (do_sony_cmd(cmd_buff, 3, status, NULL, 0, 0) != 0) {
-				printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMVOLCTRL)\n",
-						status[0]);
-				return -EIO;
-			}
-		}
-		return 0;
-
-	case CDROMEJECT:			/* Eject the drive */
-		cmd_buff[0] = SONY535_STOP;
-		do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-		cmd_buff[0] = SONY535_SPIN_DOWN;
-		do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-
-		sony_audio_status = CDROM_AUDIO_INVALID;
-		cmd_buff[0] = SONY535_EJECT_CADDY;
-		if (do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0) != 0) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMEJECT)\n",
-					status[0]);
-			return -EIO;
-		}
-		return 0;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-}
-
-
-/*
- * Open the drive for operations.  Spin the drive up and read the table of
- * contents if these have not already been done.
- */
-static int
-cdu_open(struct inode *inode,
-		 struct file *filp)
-{
-	Byte status[2], cmd_buff[2];
-
-	if (sony_inuse)
-		return -EBUSY;
-	if (check_drive_status() != 0)
-		return -EIO;
-	sony_inuse = 1;
-
-	if (spin_up_drive(status) != 0) {
-		printk(CDU535_MESSAGE_NAME " error 0x%.2x (cdu_open, spin up)\n",
-				status[0]);
-		sony_inuse = 0;
-		return -EIO;
-	}
-	sony_get_toc();
-	if (!sony_toc_read) {
-		cmd_buff[0] = SONY535_SPIN_DOWN;
-		do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-		sony_inuse = 0;
-		return -EIO;
-	}
-	check_disk_change(inode->i_bdev);
-	sony_usage++;
-
-#ifdef LOCK_DOORS
-	/* disable the eject button while mounted */
-	cmd_buff[0] = SONY535_DISABLE_EJECT_BUTTON;
-	do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-#endif
-
-	return 0;
-}
-
-
-/*
- * Close the drive.  Spin it down if no task is using it.  The spin
- * down will fail if playing audio, so audio play is OK.
- */
-static int
-cdu_release(struct inode *inode,
-			struct file *filp)
-{
-	Byte status[2], cmd_no;
-
-	sony_inuse = 0;
-
-	if (0 < sony_usage) {
-		sony_usage--;
-	}
-	if (sony_usage == 0) {
-		check_drive_status();
-
-		if (sony_audio_status != CDROM_AUDIO_PLAY) {
-			cmd_no = SONY535_SPIN_DOWN;
-			do_sony_cmd(&cmd_no, 1, status, NULL, 0, 0);
-		}
-#ifdef LOCK_DOORS
-		/* enable the eject button after umount */
-		cmd_no = SONY535_ENABLE_EJECT_BUTTON;
-		do_sony_cmd(&cmd_no, 1, status, NULL, 0, 0);
-#endif
-	}
-	return 0;
-}
-
-static struct block_device_operations cdu_fops =
-{
-	.owner		= THIS_MODULE,
-	.open		= cdu_open,
-	.release	= cdu_release,
-	.ioctl		= cdu_ioctl,
-	.media_changed	= cdu535_check_media_change,
-};
-
-static struct gendisk *cdu_disk;
-
-/*
- * Initialize the driver.
- */
-static int __init sony535_init(void)
-{
-	struct s535_sony_drive_config drive_config;
-	Byte cmd_buff[3];
-	Byte ret_buff[2];
-	Byte status[2];
-	unsigned long snap;
-	int  got_result = 0;
-	int  tmp_irq;
-	int  i;
-	int err;
-
-	/* Setting the base I/O address to 0 will disable it. */
-	if ((sony535_cd_base_io == 0xffff)||(sony535_cd_base_io == 0))
-		return 0;
-
-	/* Set up all the register locations */
-	result_reg = sony535_cd_base_io;
-	command_reg = sony535_cd_base_io;
-	data_reg = sony535_cd_base_io + 1;
-	read_status_reg = sony535_cd_base_io + 2;
-	select_unit_reg = sony535_cd_base_io + 3;
-
-#ifndef USE_IRQ
-	sony535_irq_used = 0;	/* polling only until this is ready... */
-#endif
-	/* we need to poll until things get initialized */
-	tmp_irq = sony535_irq_used;
-	sony535_irq_used = 0;
-
-#if DEBUG > 0
-	printk(KERN_INFO CDU535_MESSAGE_NAME ": probing base address %03X\n",
-			sony535_cd_base_io);
-#endif
-	/* look for the CD-ROM, follows the procedure in the DOS driver */
-	inb(select_unit_reg);
-	/* wait for 40 18 Hz ticks (reverse-engineered from DOS driver) */
-	schedule_timeout_interruptible((HZ+17)*40/18);
-	inb(result_reg);
-
-	outb(0, read_status_reg);	/* does a reset? */
-	snap = jiffies;
-	while (jiffies-snap < SONY_JIFFIES_TIMEOUT) {
-		select_unit(0);
-		if (inb(result_reg) != 0xff) {
-			got_result = 1;
-			break;
-		}
-		sony_sleep();
-	}
-
-	if (!got_result || check_drive_status() == TIME_OUT)
-		goto Enodev;
-
-	/* CD-ROM drive responded --  get the drive configuration */
-	cmd_buff[0] = SONY535_INQUIRY;
-	if (do_sony_cmd(cmd_buff, 1, status, (Byte *)&drive_config, 28, 1) != 0)
-		goto Enodev;
-
-	/* was able to get the configuration,
-	 * set drive mode as rest of init
-	 */
-#if DEBUG > 0
-	/* 0x50 == CADDY_NOT_INSERTED | NOT_SPINNING */
-	if ( (status[0] & 0x7f) != 0 && (status[0] & 0x7f) != 0x50 )
-		printk(CDU535_MESSAGE_NAME
-				"Inquiry command returned status = 0x%x\n", status[0]);
-#endif
-	/* now ready to use interrupts, if available */
-	sony535_irq_used = tmp_irq;
-
-	/* A negative sony535_irq_used will attempt an autoirq. */
-	if (sony535_irq_used < 0) {
-		unsigned long irq_mask, delay;
-
-		irq_mask = probe_irq_on();
-		enable_interrupts();
-		outb(0, read_status_reg);	/* does a reset? */
-		delay = jiffies + HZ/10;
-		while (time_before(jiffies, delay)) ;
-
-		sony535_irq_used = probe_irq_off(irq_mask);
-		disable_interrupts();
-	}
-	if (sony535_irq_used > 0) {
-	    if (request_irq(sony535_irq_used, cdu535_interrupt,
-						IRQF_DISABLED, CDU535_HANDLE, NULL)) {
-			printk("Unable to grab IRQ%d for the " CDU535_MESSAGE_NAME
-					" driver; polling instead.\n", sony535_irq_used);
-			sony535_irq_used = 0;
-		}
-	}
-	cmd_buff[0] = SONY535_SET_DRIVE_MODE;
-	cmd_buff[1] = 0x0;	/* default audio */
-	if (do_sony_cmd(cmd_buff, 2, status, ret_buff, 1, 1) != 0)
-		goto Enodev_irq;
-
-	/* set the drive mode successful, we are set! */
-	sony_buffer_size = SONY535_BUFFER_SIZE;
-	sony_buffer_sectors = sony_buffer_size / CDU535_BLOCK_SIZE;
-
-	printk(KERN_INFO CDU535_MESSAGE_NAME " I/F CDROM : %8.8s %16.16s %4.4s",
-		   drive_config.vendor_id,
-		   drive_config.product_id,
-		   drive_config.product_rev_level);
-	printk("  base address %03X, ", sony535_cd_base_io);
-	if (tmp_irq > 0)
-		printk("IRQ%d, ", tmp_irq);
-	printk("using %d byte buffer\n", sony_buffer_size);
-
-	if (register_blkdev(MAJOR_NR, CDU535_HANDLE)) {
-		err = -EIO;
-		goto out1;
-	}
-	sonycd535_queue = blk_init_queue(do_cdu535_request, &sonycd535_lock);
-	if (!sonycd535_queue) {
-		err = -ENOMEM;
-		goto out1a;
-	}
-
-	blk_queue_hardsect_size(sonycd535_queue, CDU535_BLOCK_SIZE);
-	sony_toc = kmalloc(sizeof(struct s535_sony_toc), GFP_KERNEL);
-	err = -ENOMEM;
-	if (!sony_toc)
-		goto out2;
-	last_sony_subcode = kmalloc(sizeof(struct s535_sony_subcode), GFP_KERNEL);
-	if (!last_sony_subcode)
-		goto out3;
-	sony_buffer = kmalloc(sizeof(Byte *) * sony_buffer_sectors, GFP_KERNEL);
-	if (!sony_buffer)
-		goto out4;
-	for (i = 0; i < sony_buffer_sectors; i++) {
-		sony_buffer[i] = kmalloc(CDU535_BLOCK_SIZE, GFP_KERNEL);
-		if (!sony_buffer[i]) {
-			while (--i>=0)
-				kfree(sony_buffer[i]);
-			goto out5;
-		}
-	}
-	initialized = 1;
-
-	cdu_disk = alloc_disk(1);
-	if (!cdu_disk)
-		goto out6;
-	cdu_disk->major = MAJOR_NR;
-	cdu_disk->first_minor = 0;
-	cdu_disk->fops = &cdu_fops;
-	sprintf(cdu_disk->disk_name, "cdu");
-
-	if (!request_region(sony535_cd_base_io, 4, CDU535_HANDLE)) {
-		printk(KERN_WARNING"sonycd535: Unable to request region 0x%x\n",
-			sony535_cd_base_io);
-		goto out7;
-	}
-	cdu_disk->queue = sonycd535_queue;
-	add_disk(cdu_disk);
-	return 0;
-
-out7:
-	put_disk(cdu_disk);
-out6:
-	for (i = 0; i < sony_buffer_sectors; i++)
-		kfree(sony_buffer[i]);
-out5:
-	kfree(sony_buffer);
-out4:
-	kfree(last_sony_subcode);
-out3:
-	kfree(sony_toc);
-out2:
-	blk_cleanup_queue(sonycd535_queue);
-out1a:
-	unregister_blkdev(MAJOR_NR, CDU535_HANDLE);
-out1:
-	if (sony535_irq_used)
-		free_irq(sony535_irq_used, NULL);
-	return err;
-Enodev_irq:
-	if (sony535_irq_used)
-		free_irq(sony535_irq_used, NULL);
-Enodev:
-	printk("Did not find a " CDU535_MESSAGE_NAME " drive\n");
-	return -EIO;
-}
-
-#ifndef MODULE
-
-/*
- * accept "kernel command line" parameters
- * (added by emoenke@gwdg.de)
- *
- * use: tell LILO:
- *                 sonycd535=0x320
- *
- * the address value has to be the existing CDROM port address.
- */
-static int __init
-sonycd535_setup(char *strings)
-{
-	int ints[3];
-	(void)get_options(strings, ARRAY_SIZE(ints), ints);
-	/* if IRQ change and default io base desired,
-	 * then call with io base of 0
-	 */
-	if (ints[0] > 0)
-		if (ints[1] != 0)
-			sony535_cd_base_io = ints[1];
-	if (ints[0] > 1)
-		sony535_irq_used = ints[2];
-	if ((strings != NULL) && (*strings != '\0'))
-		printk(CDU535_MESSAGE_NAME
-				": Warning: Unknown interface type: %s\n", strings);
-				
-	return 1;
-}
-
-__setup("sonycd535=", sonycd535_setup);
-
-#endif /* MODULE */
-
-static void __exit
-sony535_exit(void)
-{
-	int i;
-
-	release_region(sony535_cd_base_io, 4);
-	for (i = 0; i < sony_buffer_sectors; i++)
-		kfree(sony_buffer[i]);
-	kfree(sony_buffer);
-	kfree(last_sony_subcode);
-	kfree(sony_toc);
-	del_gendisk(cdu_disk);
-	put_disk(cdu_disk);
-	blk_cleanup_queue(sonycd535_queue);
-	if (unregister_blkdev(MAJOR_NR, CDU535_HANDLE) == -EINVAL)
-		printk("Uh oh, couldn't unregister " CDU535_HANDLE "\n");
-	else
-		printk(KERN_INFO CDU535_HANDLE " module released\n");
-}
-
-module_init(sony535_init);
-module_exit(sony535_exit);
-
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(CDU535_CDROM_MAJOR);
diff --git a/drivers/cdrom/sonycd535.h b/drivers/cdrom/sonycd535.h
deleted file mode 100644
index 5dea1ef168d6..000000000000
--- a/drivers/cdrom/sonycd535.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef SONYCD535_H
-#define SONYCD535_H
-
-/*
- * define all the commands recognized by the CDU-531/5
- */
-#define SONY535_REQUEST_DRIVE_STATUS_1		(0x80)
-#define SONY535_REQUEST_SENSE			(0x82)
-#define SONY535_REQUEST_DRIVE_STATUS_2		(0x84)
-#define SONY535_REQUEST_ERROR_STATUS		(0x86)
-#define SONY535_REQUEST_AUDIO_STATUS		(0x88)
-#define SONY535_INQUIRY				(0x8a)
-
-#define SONY535_SET_INACTIVITY_TIME		(0x90)
-
-#define SONY535_SEEK_AND_READ_N_BLOCKS_1	(0xa0)
-#define SONY535_SEEK_AND_READ_N_BLOCKS_2	(0xa4)
-#define SONY535_PLAY_AUDIO			(0xa6)
-
-#define SONY535_REQUEST_DISC_CAPACITY		(0xb0)
-#define SONY535_REQUEST_TOC_DATA		(0xb2)
-#define SONY535_REQUEST_SUB_Q_DATA		(0xb4)
-#define SONY535_REQUEST_ISRC			(0xb6)
-#define SONY535_REQUEST_UPC_EAN			(0xb8)
-
-#define SONY535_SET_DRIVE_MODE			(0xc0)
-#define SONY535_REQUEST_DRIVE_MODE		(0xc2)
-#define SONY535_SET_RETRY_COUNT			(0xc4)
-
-#define SONY535_DIAGNOSTIC_1			(0xc6)
-#define SONY535_DIAGNOSTIC_4			(0xcc)
-#define SONY535_DIAGNOSTIC_5			(0xce)
-
-#define SONY535_EJECT_CADDY			(0xd0)
-#define SONY535_DISABLE_EJECT_BUTTON		(0xd2)
-#define SONY535_ENABLE_EJECT_BUTTON		(0xd4)
-
-#define SONY535_HOLD				(0xe0)
-#define SONY535_AUDIO_PAUSE_ON_OFF		(0xe2)
-#define SONY535_SET_VOLUME			(0xe8)
-
-#define SONY535_STOP				(0xf0)
-#define SONY535_SPIN_UP				(0xf2)
-#define SONY535_SPIN_DOWN			(0xf4)
-
-#define SONY535_CLEAR_PARAMETERS		(0xf6)
-#define SONY535_CLEAR_ENDING_ADDRESS		(0xf8)
-
-/*
- * define some masks
- */
-#define SONY535_DATA_NOT_READY_BIT		(0x1)
-#define SONY535_RESULT_NOT_READY_BIT		(0x2)
-
-/*
- *  drive status 1
- */
-#define SONY535_STATUS1_COMMAND_ERROR		(0x1)
-#define SONY535_STATUS1_DATA_ERROR		(0x2)
-#define SONY535_STATUS1_SEEK_ERROR		(0x4)
-#define SONY535_STATUS1_DISC_TYPE_ERROR		(0x8)
-#define SONY535_STATUS1_NOT_SPINNING		(0x10)
-#define SONY535_STATUS1_EJECT_BUTTON_PRESSED	(0x20)
-#define SONY535_STATUS1_CADDY_NOT_INSERTED	(0x40)
-#define SONY535_STATUS1_BYTE_TWO_FOLLOWS	(0x80)
-
-/*
- * drive status 2
- */
-#define SONY535_CDD_LOADING_ERROR		(0x7)
-#define SONY535_CDD_NO_DISC			(0x8)
-#define SONY535_CDD_UNLOADING_ERROR		(0x9)
-#define SONY535_CDD_CADDY_NOT_INSERTED		(0xd)
-#define SONY535_ATN_RESET_OCCURRED		(0x2)
-#define SONY535_ATN_DISC_CHANGED		(0x4)
-#define SONY535_ATN_RESET_AND_DISC_CHANGED	(0x6)
-#define SONY535_ATN_EJECT_IN_PROGRESS		(0xe)
-#define SONY535_ATN_BUSY			(0xf)
-
-/*
- * define some parameters
- */
-#define SONY535_AUDIO_DRIVE_MODE		(0)
-#define SONY535_CDROM_DRIVE_MODE		(0xe0)
-
-#define SONY535_PLAY_OP_PLAYBACK		(0)
-#define SONY535_PLAY_OP_ENTER_HOLD		(1)
-#define SONY535_PLAY_OP_SET_AUDIO_ENDING_ADDR	(2)
-#define SONY535_PLAY_OP_SCAN_FORWARD		(3)
-#define SONY535_PLAY_OP_SCAN_BACKWARD		(4)
-
-/*
- *  convert from msf format to block number 
- */
-#define SONY_BLOCK_NUMBER(m,s,f) (((m)*60L+(s))*75L+(f))
-#define SONY_BLOCK_NUMBER_MSF(x) (((x)[0]*60L+(x)[1])*75L+(x)[2])
-
-/*
- *  error return values from the doSonyCmd() routines
- */
-#define TIME_OUT			(-1)
-#define NO_CDROM			(-2)
-#define BAD_STATUS			(-3)
-#define CD_BUSY				(-4)
-#define NOT_DATA_CD			(-5)
-#define NO_ROOM				(-6)
-
-#define LOG_START_OFFSET        150     /* Offset of first logical sector */
-
-#define SONY_JIFFIES_TIMEOUT	(5*HZ)	/* Maximum time
-					   the drive will wait/try for an
-					   operation */
-#define SONY_READY_RETRIES      (50000)  /* How many times to retry a
-                                                  spin waiting for a register
-                                                  to come ready */
-#define SONY535_FAST_POLLS	(10000)   /* how many times recheck 
-                                                  status waiting for a data
-                                                  to become ready */
-
-typedef unsigned char Byte;
-
-/*
- * This is the complete status returned from the drive configuration request
- * command.
- */
-struct s535_sony_drive_config
-{
-   char vendor_id[8];
-   char product_id[16];
-   char product_rev_level[4];
-};
-
-/* The following is returned from the request sub-q data command */
-struct s535_sony_subcode
-{
-   unsigned char address        :4;
-   unsigned char control        :4;
-   unsigned char track_num;
-   unsigned char index_num;
-   unsigned char rel_msf[3];
-   unsigned char abs_msf[3];
-};
-
-struct s535_sony_disc_capacity
-{
-   Byte mFirstTrack, sFirstTrack, fFirstTrack;
-   Byte mLeadOut, sLeadOut, fLeadOut;
-};
-
-/*
- * The following is returned from the request TOC (Table Of Contents) command.
- * (last_track_num-first_track_num+1) values are valid in tracks.
- */
-struct s535_sony_toc
-{
-   unsigned char reserved0      :4;
-   unsigned char control0       :4;
-   unsigned char point0;
-   unsigned char first_track_num;
-   unsigned char reserved0a;
-   unsigned char reserved0b;
-   unsigned char reserved1      :4;
-   unsigned char control1       :4;
-   unsigned char point1;
-   unsigned char last_track_num;
-   unsigned char dummy1;
-   unsigned char dummy2;
-   unsigned char reserved2      :4;
-   unsigned char control2       :4;
-   unsigned char point2;
-   unsigned char lead_out_start_msf[3];
-   struct
-   {
-      unsigned char reserved    :4;
-      unsigned char control     :4;
-      unsigned char track;
-      unsigned char track_start_msf[3];
-   } tracks[100];
-
-   unsigned int lead_out_start_lba;
-};
-
-#endif /* SONYCD535_H */