Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

2 files changed, 37 insertions, 5 deletions

diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index f364fa4d24eb..72fe0a5a8bf3 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,6 +30,10 @@
 #include <asm/signal.h>
 #endif
 
+#ifdef CONFIG_MIPS
+#include <asm/traps.h>
+#endif
+
 #define  ARB_ERR_CAP_CLEAR		(1 << 0)
 #define  ARB_ERR_CAP_STATUS_TIMEOUT	(1 << 12)
 #define  ARB_ERR_CAP_STATUS_TEA		(1 << 11)
@@ -238,6 +242,29 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
 }
 #endif
 
+#ifdef CONFIG_MIPS
+static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
+{
+	int ret = 0;
+	struct brcmstb_gisb_arb_device *gdev;
+	u32 cap_status;
+
+	list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next) {
+		cap_status = gisb_read(gdev, ARB_ERR_CAP_STATUS);
+
+		/* Invalid captured address, bail out */
+		if (!(cap_status & ARB_ERR_CAP_STATUS_VALID)) {
+			is_fixup = 1;
+			goto out;
+		}
+
+		ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error");
+	}
+out:
+	return is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
+}
+#endif
+
 static irqreturn_t brcmstb_gisb_timeout_handler(int irq, void *dev_id)
 {
 	brcmstb_gisb_arb_decode_addr(dev_id, "timeout");
@@ -355,6 +382,9 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
 	hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
 			"imprecise external abort");
 #endif
+#ifdef CONFIG_MIPS
+	board_be_handler = brcmstb_bus_error_handler;
+#endif
 
 	dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
 			gdev->base, timeout_irq, tea_irq);
diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index 1c543effe062..cad49bc38b3e 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -599,8 +599,8 @@ BUILD_PERDEV_HELPER(cpu_up)         /* int mips_cdmm_cpu_up_helper(...) */
  * mips_cdmm_bus_down() - Tear down the CDMM bus.
  * @data:	Pointer to unsigned int CPU number.
  *
- * This work_on_cpu callback function is executed on a given CPU to call the
- * CDMM driver cpu_down callback for all devices on that CPU.
+ * This function is executed on the hotplugged CPU and calls the CDMM
+ * driver cpu_down callback for all devices on that CPU.
  */
 static long mips_cdmm_bus_down(void *data)
 {
@@ -630,7 +630,9 @@ static long mips_cdmm_bus_down(void *data)
  * CDMM devices on that CPU, or to call the CDMM driver cpu_up callback for all
  * devices already discovered on that CPU.
  *
- * It is used during initialisation and when CPUs are brought online.
+ * It is used as work_on_cpu callback function during
+ * initialisation. When CPUs are brought online the function is
+ * invoked directly on the hotplugged CPU.
  */
 static long mips_cdmm_bus_up(void *data)
 {
@@ -677,10 +679,10 @@ static int mips_cdmm_cpu_notify(struct notifier_block *nb,
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
 	case CPU_DOWN_FAILED:
-		work_on_cpu(cpu, mips_cdmm_bus_up, &cpu);
+		mips_cdmm_bus_up(&cpu);
 		break;
 	case CPU_DOWN_PREPARE:
-		work_on_cpu(cpu, mips_cdmm_bus_down, &cpu);
+		mips_cdmm_bus_down(&cpu);
 		break;
 	default:
 		return NOTIFY_DONE;