summaryrefslogtreecommitdiffstats
path: root/drivers/bus
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 14:05:12 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 14:05:12 -0800
commit8c609698569578913ad40bb160b97c3f6cfa15ec (patch)
treea8a0a3b90ec9056a05f62a1c84970b5f34a3c139 /drivers/bus
parent18c83d2c0390fd0e8336ad090a047c56037d19f5 (diff)
parentfa32475ad56d339178c9be12678906f2b39e3b47 (diff)
downloadlinux-8c609698569578913ad40bb160b97c3f6cfa15ec.tar.bz2
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ...
Diffstat (limited to 'drivers/bus')
-rw-r--r--drivers/bus/Kconfig7
-rw-r--r--drivers/bus/Makefile1
-rw-r--r--drivers/bus/ti-sysc.c583
3 files changed, 591 insertions, 0 deletions
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 3e66f4cc1a59..fa94a85bf410 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -158,6 +158,13 @@ config TEGRA_GMI
Driver for the Tegra Generic Memory Interface bus which can be used
to attach devices such as NOR, UART, FPGA and more.
+config TI_SYSC
+ bool "TI sysc interconnect target module driver"
+ depends on ARCH_OMAP2PLUS
+ help
+ Generic driver for Texas Instruments interconnect target module
+ found on many TI SoCs.
+
config UNIPHIER_SYSTEM_BUS
tristate "UniPhier System Bus driver"
depends on ARCH_UNIPHIER && OF
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 3ae96cffabd5..94a079008cbe 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o
+obj-$(CONFIG_TI_SYSC) += ti-sysc.o
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
new file mode 100644
index 000000000000..c3c76a1ea8a8
--- /dev/null
+++ b/drivers/bus/ti-sysc.c
@@ -0,0 +1,583 @@
+/*
+ * ti-sysc.c - Texas Instruments sysc interconnect target driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+enum sysc_registers {
+ SYSC_REVISION,
+ SYSC_SYSCONFIG,
+ SYSC_SYSSTATUS,
+ SYSC_MAX_REGS,
+};
+
+static const char * const reg_names[] = { "rev", "sysc", "syss", };
+
+enum sysc_clocks {
+ SYSC_FCK,
+ SYSC_ICK,
+ SYSC_MAX_CLOCKS,
+};
+
+static const char * const clock_names[] = { "fck", "ick", };
+
+/**
+ * struct sysc - TI sysc interconnect target module registers and capabilities
+ * @dev: struct device pointer
+ * @module_pa: physical address of the interconnect target module
+ * @module_size: size of the interconnect target module
+ * @module_va: virtual address of the interconnect target module
+ * @offsets: register offsets from module base
+ * @clocks: clocks used by the interconnect target module
+ * @legacy_mode: configured for legacy mode if set
+ */
+struct sysc {
+ struct device *dev;
+ u64 module_pa;
+ u32 module_size;
+ void __iomem *module_va;
+ int offsets[SYSC_MAX_REGS];
+ struct clk *clocks[SYSC_MAX_CLOCKS];
+ const char *legacy_mode;
+};
+
+static u32 sysc_read_revision(struct sysc *ddata)
+{
+ return readl_relaxed(ddata->module_va +
+ ddata->offsets[SYSC_REVISION]);
+}
+
+static int sysc_get_one_clock(struct sysc *ddata,
+ enum sysc_clocks index)
+{
+ const char *name;
+ int error;
+
+ switch (index) {
+ case SYSC_FCK:
+ break;
+ case SYSC_ICK:
+ break;
+ default:
+ return -EINVAL;
+ }
+ name = clock_names[index];
+
+ ddata->clocks[index] = devm_clk_get(ddata->dev, name);
+ if (IS_ERR(ddata->clocks[index])) {
+ if (PTR_ERR(ddata->clocks[index]) == -ENOENT)
+ return 0;
+
+ dev_err(ddata->dev, "clock get error for %s: %li\n",
+ name, PTR_ERR(ddata->clocks[index]));
+
+ return PTR_ERR(ddata->clocks[index]);
+ }
+
+ error = clk_prepare(ddata->clocks[index]);
+ if (error) {
+ dev_err(ddata->dev, "clock prepare error for %s: %i\n",
+ name, error);
+
+ return error;
+ }
+
+ return 0;
+}
+
+static int sysc_get_clocks(struct sysc *ddata)
+{
+ int i, error;
+
+ if (ddata->legacy_mode)
+ return 0;
+
+ for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
+ error = sysc_get_one_clock(ddata, i);
+ if (error && error != -ENOENT)
+ return error;
+ }
+
+ return 0;
+}
+
+/**
+ * sysc_parse_and_check_child_range - parses module IO region from ranges
+ * @ddata: device driver data
+ *
+ * In general we only need rev, syss, and sysc registers and not the whole
+ * module range. But we do want the offsets for these registers from the
+ * module base. This allows us to check them against the legacy hwmod
+ * platform data. Let's also check the ranges are configured properly.
+ */
+static int sysc_parse_and_check_child_range(struct sysc *ddata)
+{
+ struct device_node *np = ddata->dev->of_node;
+ const __be32 *ranges;
+ u32 nr_addr, nr_size;
+ int len, error;
+
+ ranges = of_get_property(np, "ranges", &len);
+ if (!ranges) {
+ dev_err(ddata->dev, "missing ranges for %pOF\n", np);
+
+ return -ENOENT;
+ }
+
+ len /= sizeof(*ranges);
+
+ if (len < 3) {
+ dev_err(ddata->dev, "incomplete ranges for %pOF\n", np);
+
+ return -EINVAL;
+ }
+
+ error = of_property_read_u32(np, "#address-cells", &nr_addr);
+ if (error)
+ return -ENOENT;
+
+ error = of_property_read_u32(np, "#size-cells", &nr_size);
+ if (error)
+ return -ENOENT;
+
+ if (nr_addr != 1 || nr_size != 1) {
+ dev_err(ddata->dev, "invalid ranges for %pOF\n", np);
+
+ return -EINVAL;
+ }
+
+ ranges++;
+ ddata->module_pa = of_translate_address(np, ranges++);
+ ddata->module_size = be32_to_cpup(ranges);
+
+ dev_dbg(ddata->dev, "interconnect target 0x%llx size 0x%x for %pOF\n",
+ ddata->module_pa, ddata->module_size, np);
+
+ return 0;
+}
+
+/**
+ * sysc_check_one_child - check child configuration
+ * @ddata: device driver data
+ * @np: child device node
+ *
+ * Let's avoid messy situations where we have new interconnect target
+ * node but children have "ti,hwmods". These belong to the interconnect
+ * target node and are managed by this driver.
+ */
+static int sysc_check_one_child(struct sysc *ddata,
+ struct device_node *np)
+{
+ const char *name;
+
+ name = of_get_property(np, "ti,hwmods", NULL);
+ if (name)
+ dev_warn(ddata->dev, "really a child ti,hwmods property?");
+
+ return 0;
+}
+
+static int sysc_check_children(struct sysc *ddata)
+{
+ struct device_node *child;
+ int error;
+
+ for_each_child_of_node(ddata->dev->of_node, child) {
+ error = sysc_check_one_child(ddata, child);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+/**
+ * sysc_parse_one - parses the interconnect target module registers
+ * @ddata: device driver data
+ * @reg: register to parse
+ */
+static int sysc_parse_one(struct sysc *ddata, enum sysc_registers reg)
+{
+ struct resource *res;
+ const char *name;
+
+ switch (reg) {
+ case SYSC_REVISION:
+ case SYSC_SYSCONFIG:
+ case SYSC_SYSSTATUS:
+ name = reg_names[reg];
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ res = platform_get_resource_byname(to_platform_device(ddata->dev),
+ IORESOURCE_MEM, name);
+ if (!res) {
+ dev_dbg(ddata->dev, "has no %s register\n", name);
+ ddata->offsets[reg] = -ENODEV;
+
+ return 0;
+ }
+
+ ddata->offsets[reg] = res->start - ddata->module_pa;
+
+ return 0;
+}
+
+static int sysc_parse_registers(struct sysc *ddata)
+{
+ int i, error;
+
+ for (i = 0; i < SYSC_MAX_REGS; i++) {
+ error = sysc_parse_one(ddata, i);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+/**
+ * sysc_check_registers - check for misconfigured register overlaps
+ * @ddata: device driver data
+ */
+static int sysc_check_registers(struct sysc *ddata)
+{
+ int i, j, nr_regs = 0, nr_matches = 0;
+
+ for (i = 0; i < SYSC_MAX_REGS; i++) {
+ if (ddata->offsets[i] < 0)
+ continue;
+
+ if (ddata->offsets[i] > (ddata->module_size - 4)) {
+ dev_err(ddata->dev, "register outside module range");
+
+ return -EINVAL;
+ }
+
+ for (j = 0; j < SYSC_MAX_REGS; j++) {
+ if (ddata->offsets[j] < 0)
+ continue;
+
+ if (ddata->offsets[i] == ddata->offsets[j])
+ nr_matches++;
+ }
+ nr_regs++;
+ }
+
+ if (nr_regs < 1) {
+ dev_err(ddata->dev, "missing registers\n");
+
+ return -EINVAL;
+ }
+
+ if (nr_matches > nr_regs) {
+ dev_err(ddata->dev, "overlapping registers: (%i/%i)",
+ nr_regs, nr_matches);
+
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * syc_ioremap - ioremap register space for the interconnect target module
+ * @ddata: deviec driver data
+ *
+ * Note that the interconnect target module registers can be anywhere
+ * within the first child device address space. For example, SGX has
+ * them at offset 0x1fc00 in the 32MB module address space. We just
+ * what we need around the interconnect target module registers.
+ */
+static int sysc_ioremap(struct sysc *ddata)
+{
+ u32 size = 0;
+
+ if (ddata->offsets[SYSC_SYSSTATUS] >= 0)
+ size = ddata->offsets[SYSC_SYSSTATUS];
+ else if (ddata->offsets[SYSC_SYSCONFIG] >= 0)
+ size = ddata->offsets[SYSC_SYSCONFIG];
+ else if (ddata->offsets[SYSC_REVISION] >= 0)
+ size = ddata->offsets[SYSC_REVISION];
+ else
+ return -EINVAL;
+
+ size &= 0xfff00;
+ size += SZ_256;
+
+ ddata->module_va = devm_ioremap(ddata->dev,
+ ddata->module_pa,
+ size);
+ if (!ddata->module_va)
+ return -EIO;
+
+ return 0;
+}
+
+/**
+ * sysc_map_and_check_registers - ioremap and check device registers
+ * @ddata: device driver data
+ */
+static int sysc_map_and_check_registers(struct sysc *ddata)
+{
+ int error;
+
+ error = sysc_parse_and_check_child_range(ddata);
+ if (error)
+ return error;
+
+ error = sysc_check_children(ddata);
+ if (error)
+ return error;
+
+ error = sysc_parse_registers(ddata);
+ if (error)
+ return error;
+
+ error = sysc_ioremap(ddata);
+ if (error)
+ return error;
+
+ error = sysc_check_registers(ddata);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+/**
+ * sysc_show_rev - read and show interconnect target module revision
+ * @bufp: buffer to print the information to
+ * @ddata: device driver data
+ */
+static int sysc_show_rev(char *bufp, struct sysc *ddata)
+{
+ int error, len;
+
+ if (ddata->offsets[SYSC_REVISION] < 0)
+ return sprintf(bufp, ":NA");
+
+ error = pm_runtime_get_sync(ddata->dev);
+ if (error < 0) {
+ pm_runtime_put_noidle(ddata->dev);
+
+ return 0;
+ }
+
+ len = sprintf(bufp, ":%08x", sysc_read_revision(ddata));
+
+ pm_runtime_mark_last_busy(ddata->dev);
+ pm_runtime_put_autosuspend(ddata->dev);
+
+ return len;
+}
+
+static int sysc_show_reg(struct sysc *ddata,
+ char *bufp, enum sysc_registers reg)
+{
+ if (ddata->offsets[reg] < 0)
+ return sprintf(bufp, ":NA");
+
+ return sprintf(bufp, ":%x", ddata->offsets[reg]);
+}
+
+/**
+ * sysc_show_registers - show information about interconnect target module
+ * @ddata: device driver data
+ */
+static void sysc_show_registers(struct sysc *ddata)
+{
+ char buf[128];
+ char *bufp = buf;
+ int i;
+
+ for (i = 0; i < SYSC_MAX_REGS; i++)
+ bufp += sysc_show_reg(ddata, bufp, i);
+
+ bufp += sysc_show_rev(bufp, ddata);
+
+ dev_dbg(ddata->dev, "%llx:%x%s\n",
+ ddata->module_pa, ddata->module_size,
+ buf);
+}
+
+static int __maybe_unused sysc_runtime_suspend(struct device *dev)
+{
+ struct sysc *ddata;
+ int i;
+
+ ddata = dev_get_drvdata(dev);
+
+ if (ddata->legacy_mode)
+ return 0;
+
+ for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
+ if (IS_ERR_OR_NULL(ddata->clocks[i]))
+ continue;
+ clk_disable(ddata->clocks[i]);
+ }
+
+ return 0;
+}
+
+static int __maybe_unused sysc_runtime_resume(struct device *dev)
+{
+ struct sysc *ddata;
+ int i, error;
+
+ ddata = dev_get_drvdata(dev);
+
+ if (ddata->legacy_mode)
+ return 0;
+
+ for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
+ if (IS_ERR_OR_NULL(ddata->clocks[i]))
+ continue;
+ error = clk_enable(ddata->clocks[i]);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops sysc_pm_ops = {
+ SET_RUNTIME_PM_OPS(sysc_runtime_suspend,
+ sysc_runtime_resume,
+ NULL)
+};
+
+static void sysc_unprepare(struct sysc *ddata)
+{
+ int i;
+
+ for (i = 0; i < SYSC_MAX_CLOCKS; i++) {
+ if (!IS_ERR_OR_NULL(ddata->clocks[i]))
+ clk_unprepare(ddata->clocks[i]);
+ }
+}
+
+static int sysc_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct sysc *ddata;
+ int error;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->dev = &pdev->dev;
+ ddata->legacy_mode = of_get_property(np, "ti,hwmods", NULL);
+
+ error = sysc_get_clocks(ddata);
+ if (error)
+ return error;
+
+ error = sysc_map_and_check_registers(ddata);
+ if (error)
+ goto unprepare;
+
+ platform_set_drvdata(pdev, ddata);
+
+ pm_runtime_enable(ddata->dev);
+ error = pm_runtime_get_sync(ddata->dev);
+ if (error < 0) {
+ pm_runtime_put_noidle(ddata->dev);
+ pm_runtime_disable(ddata->dev);
+ goto unprepare;
+ }
+
+ pm_runtime_use_autosuspend(ddata->dev);
+
+ sysc_show_registers(ddata);
+
+ error = of_platform_populate(ddata->dev->of_node,
+ NULL, NULL, ddata->dev);
+ if (error)
+ goto err;
+
+ pm_runtime_mark_last_busy(ddata->dev);
+ pm_runtime_put_autosuspend(ddata->dev);
+
+ return 0;
+
+err:
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+unprepare:
+ sysc_unprepare(ddata);
+
+ return error;
+}
+
+static int sysc_remove(struct platform_device *pdev)
+{
+ struct sysc *ddata = platform_get_drvdata(pdev);
+ int error;
+
+ error = pm_runtime_get_sync(ddata->dev);
+ if (error < 0) {
+ pm_runtime_put_noidle(ddata->dev);
+ pm_runtime_disable(ddata->dev);
+ goto unprepare;
+ }
+
+ of_platform_depopulate(&pdev->dev);
+
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+unprepare:
+ sysc_unprepare(ddata);
+
+ return 0;
+}
+
+static const struct of_device_id sysc_match[] = {
+ { .compatible = "ti,sysc-omap2" },
+ { .compatible = "ti,sysc-omap4" },
+ { .compatible = "ti,sysc-omap4-simple" },
+ { .compatible = "ti,sysc-omap3430-sr" },
+ { .compatible = "ti,sysc-omap3630-sr" },
+ { .compatible = "ti,sysc-omap4-sr" },
+ { .compatible = "ti,sysc-omap3-sham" },
+ { .compatible = "ti,sysc-omap-aes" },
+ { .compatible = "ti,sysc-mcasp" },
+ { .compatible = "ti,sysc-usb-host-fs" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sysc_match);
+
+static struct platform_driver sysc_driver = {
+ .probe = sysc_probe,
+ .remove = sysc_remove,
+ .driver = {
+ .name = "ti-sysc",
+ .of_match_table = sysc_match,
+ .pm = &sysc_pm_ops,
+ },
+};
+module_platform_driver(sysc_driver);
+
+MODULE_DESCRIPTION("TI sysc interconnect target driver");
+MODULE_LICENSE("GPL v2");