diff options
| author | Suman Anna <s-anna@ti.com> | 2015-04-24 12:54:20 -0500 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2015-05-04 10:21:01 -0700 |
| commit | e7309c2673a389a495fcfad70376d3bae8b9bc89 (patch) | |
| tree | 3c99b70ca2f511fc04e924f42df6824d6b47dde1 /drivers/bus/omap_l3_noc.c | |
| parent | 4adf82c35572c69e96997641612fc88463b08f6f (diff) | |
| download | linux-e7309c2673a389a495fcfad70376d3bae8b9bc89.tar.bz2 | |
bus: omap_l3_noc: Fix master id address decoding for OMAP5
The L3 Error handling on OMAP5 for the most part is very similar
to that of OMAP4, and had leveraged common data structures and
register layout definitions so far. Upon closer inspection, there
are a few minor differences causing an incorrect decoding and
reporting of the master NIU upon an error:
1. The L3_TARG_STDERRLOG_MSTADDR.STDERRLOG_MSTADDR occupies
11 bits on OMAP5 as against 8 bits on OMAP4, with the master
NIU connID encoded in the 6 MSBs of the STDERRLOG_MSTADDR
field.
2. The CLK3 FlagMux component has 1 input source on OMAP4 and 3
input sources on OMAP5. The common DEBUGSS source is at a
different input on each SoC.
Fix the above issues by using a OMAP5-specific compatible property
and using SoC-specific data where there are differences.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'drivers/bus/omap_l3_noc.c')
| -rw-r--r-- | drivers/bus/omap_l3_noc.c | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index 11f7982cbdb3..ebee57d715d2 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -1,7 +1,7 @@ /* * OMAP L3 Interconnect error handling driver * - * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/ * Santosh Shilimkar <santosh.shilimkar@ti.com> * Sricharan <r.sricharan@ti.com> * @@ -233,7 +233,8 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) } static const struct of_device_id l3_noc_match[] = { - {.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data}, + {.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data}, + {.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data}, {.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data}, {.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data}, {}, |