diff options
| author | Richard Laing <richard.laing@alliedtelesis.co.nz> | 2021-07-15 09:18:05 +1200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2021-07-15 10:14:44 -0700 |
| commit | 5c2c85315948c42c6c0258cf9bad596acaa79043 (patch) | |
| tree | 4e976ba1d8750f33abefcdb6a35fd827291858f5 /drivers/bus/mhi | |
| parent | 8096acd7442e613fad0354fc8dfdb2003cceea0b (diff) | |
| download | linux-5c2c85315948c42c6c0258cf9bad596acaa79043.tar.bz2 | |
bus: mhi: pci-generic: configurable network interface MRU
The MRU value used by the MHI MBIM network interface affects
the throughput performance of the interface. Different modem
models use different default MRU sizes based on their bandwidth
capabilities. Large values generally result in higher throughput
for larger packet sizes.
In addition if the MRU used by the MHI device is larger than that
specified in the MHI net device the data is fragmented and needs
to be re-assembled which generates a (single) warning message about
the fragmented packets. Setting the MRU on both ends avoids the
extra processing to re-assemble the packets.
This patch allows the documented MRU for a modem to be automatically
set as the MHI net device MRU avoiding fragmentation and improving
throughput performance.
Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/bus/mhi')
| -rw-r--r-- | drivers/bus/mhi/pci_generic.c | 6 |
1 files changed, 5 insertions, 1 deletions
diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c index ca3bc40427f8..19413daa0917 100644 --- a/drivers/bus/mhi/pci_generic.c +++ b/drivers/bus/mhi/pci_generic.c @@ -32,6 +32,7 @@ * @edl: emergency download mode firmware path (if any) * @bar_num: PCI base address register to use for MHI MMIO register space * @dma_data_width: DMA transfer word size (32 or 64 bits) + * @mru_default: default MRU size for MBIM network packets */ struct mhi_pci_dev_info { const struct mhi_controller_config *config; @@ -40,6 +41,7 @@ struct mhi_pci_dev_info { const char *edl; unsigned int bar_num; unsigned int dma_data_width; + unsigned int mru_default; }; #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \ @@ -251,7 +253,8 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = { .edl = "qcom/sdx55m/edl.mbn", .config = &modem_qcom_v1_mhiv_config, .bar_num = MHI_PCI_DEFAULT_BAR_NUM, - .dma_data_width = 32 + .dma_data_width = 32, + .mru_default = 32768 }; static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = { @@ -643,6 +646,7 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) mhi_cntrl->wake_get = mhi_pci_wake_get_nop; mhi_cntrl->wake_put = mhi_pci_wake_put_nop; mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop; + mhi_cntrl->mru = info->mru_default; err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width)); if (err) |