diff options
| author | Ilya Faenson <ifaenson@broadcom.com> | 2015-06-17 11:42:46 -0400 |
|---|---|---|
| committer | Marcel Holtmann <marcel@holtmann.org> | 2015-06-17 18:56:53 +0200 |
| commit | 40db5f0eddbee3d2a9a05a3b5dc20368cb65ca0f (patch) | |
| tree | 31427e6117c9fcfb4b3c661e826b364b2973919a /drivers/bluetooth | |
| parent | 5c698e8bbfaa6e26d851eeeeee09d61dfc9ff4a0 (diff) | |
| download | linux-40db5f0eddbee3d2a9a05a3b5dc20368cb65ca0f.tar.bz2 | |
Bluetooth: btbcm: Support the BCM4354 Bluetooth UART device
Support the BCM4354 chip and introduce vendor specific command
parameter definitions.
Signed-off-by: Ilya Faenson <ifaenson@broadcom.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'drivers/bluetooth')
| -rw-r--r-- | drivers/bluetooth/btbcm.c | 2 | ||||
| -rw-r--r-- | drivers/bluetooth/btbcm.h | 31 |
2 files changed, 33 insertions, 0 deletions
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index 8e2f6b6251c4..1e1a4323a71f 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -243,6 +243,7 @@ static const struct { } bcm_uart_subver_table[] = { { 0x410e, "BCM43341B0" }, /* 002.001.014 */ { 0x4406, "BCM4324B3" }, /* 002.004.006 */ + { 0x610c, "BCM4354" }, /* 003.001.012 */ { } }; @@ -279,6 +280,7 @@ int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len) switch ((rev & 0xf000) >> 12) { case 0: + case 1: case 3: for (i = 0; bcm_uart_subver_table[i].name; i++) { if (subver == bcm_uart_subver_table[i].subver) { diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h index 02f5f9665411..d9e6b41658e5 100644 --- a/drivers/bluetooth/btbcm.h +++ b/drivers/bluetooth/btbcm.h @@ -33,6 +33,37 @@ struct bcm_write_uart_clock_setting { __u8 type; } __packed; +struct bcm_set_sleep_mode { + __u8 sleep_mode; + __u8 idle_host; + __u8 idle_dev; + __u8 bt_wake_active; + __u8 host_wake_active; + __u8 allow_host_sleep; + __u8 combine_modes; + __u8 tristate_control; + __u8 usb_auto_sleep; + __u8 usb_resume_timeout; + __u8 pulsed_host_wake; + __u8 break_to_host; +} __packed; + +struct bcm_set_pcm_int_params { + __u8 routing; + __u8 rate; + __u8 frame_sync; + __u8 sync_mode; + __u8 clock_mode; +} __packed; + +struct bcm_set_pcm_format_params { + __u8 lsb_first; + __u8 fill_value; + __u8 fill_method; + __u8 fill_num; + __u8 right_justify; +} __packed; + #if IS_ENABLED(CONFIG_BT_BCM) int btbcm_check_bdaddr(struct hci_dev *hdev); |