summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth
diff options
context:
space:
mode:
authorHans de Goede <hdegoede@redhat.com>2018-03-16 21:28:08 +0100
committerMarcel Holtmann <marcel@holtmann.org>2018-04-01 14:25:31 +0200
commitbb5208b314c5127b716b2ee4f55803a8bb73b750 (patch)
treeca71cf1e81ebc4d6c90c5ae54987158886cd4e2a /drivers/bluetooth
parente09070c51b280567695022237e57c428e548b355 (diff)
downloadlinux-bb5208b314c5127b716b2ee4f55803a8bb73b750.tar.bz2
Bluetooth: hci_bcm: Treat Interrupt ACPI resources as always being active-low
Older devices with a serdev attached bcm bt hci, use an Interrupt ACPI resource to describe the IRQ (rather then a GpioInt resource). These device seem to all claim the IRQ is active-high and seem to all need a DMI quirk to treat it as active-low. Instead simply always assume that Interrupt resource specified IRQs are always active-low. This fixes the bt device not being able to wake the host from runtime- suspend on the: Asus T100TAM, Asus T200TA, Lenovo Yoga2 and the Toshiba Encore, without the need to add 4 new DMI quirks for these models. This also allows us to remove 2 DMI quirks for the Asus T100TA and Asus T100CHI series. Likely the 2 remaining quirks can also be removed but I could not find a DSDT of these devices to verify this. Cc: stable@vger.kernel.org Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198953 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1554835 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'drivers/bluetooth')
-rw-r--r--drivers/bluetooth/hci_bcm.c20
1 files changed, 3 insertions, 17 deletions
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 50c8523f8653..ce8c629c0eac 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -799,22 +799,6 @@ static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = {
#ifdef CONFIG_ACPI
/* IRQ polarity of some chipsets are not defined correctly in ACPI table. */
static const struct dmi_system_id bcm_active_low_irq_dmi_table[] = {
- {
- .ident = "Asus T100TA",
- .matches = {
- DMI_EXACT_MATCH(DMI_SYS_VENDOR,
- "ASUSTeK COMPUTER INC."),
- DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
- },
- },
- {
- .ident = "Asus T100CHI",
- .matches = {
- DMI_EXACT_MATCH(DMI_SYS_VENDOR,
- "ASUSTeK COMPUTER INC."),
- DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100CHI"),
- },
- },
{ /* Handle ThinkPad 8 tablets with BCM2E55 chipset ACPI ID */
.ident = "Lenovo ThinkPad 8",
.matches = {
@@ -842,7 +826,9 @@ static int bcm_resource(struct acpi_resource *ares, void *data)
switch (ares->type) {
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
irq = &ares->data.extended_irq;
- dev->irq_active_low = irq->polarity == ACPI_ACTIVE_LOW;
+ if (irq->polarity != ACPI_ACTIVE_LOW)
+ dev_info(dev->dev, "ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low\n");
+ dev->irq_active_low = true;
break;
case ACPI_RESOURCE_TYPE_GPIO: