diff options
| author | Balakrishna Godavarthi <bgodavar@codeaurora.org> | 2019-05-28 14:43:22 -0700 |
|---|---|---|
| committer | Marcel Holtmann <marcel@holtmann.org> | 2019-07-06 12:45:02 +0200 |
| commit | 32646db8cc2862a14788de1bb4c365d0a27fb532 (patch) | |
| tree | ac088126ff11fc18ab30d62b8e0a2a1b344dc666 /drivers/bluetooth | |
| parent | 82b7d856649988b5ddaad5f17abb787f6909107f (diff) | |
| download | linux-32646db8cc2862a14788de1bb4c365d0a27fb532.tar.bz2 | |
Bluetooth: btqca: inject command complete event during fw download
Latest qualcomm chips are not sending an command complete event for
every firmware packet sent to chip. They only respond with a vendor
specific event for the last firmware packet. This optimization will
decrease the BT ON time. Due to this we are seeing a timeout error
message logs on the console during firmware download. Now we are
injecting a command complete event once we receive an vendor specific
event for the last RAM firmware packet.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'drivers/bluetooth')
| -rw-r--r-- | drivers/bluetooth/btqca.c | 39 | ||||
| -rw-r--r-- | drivers/bluetooth/btqca.h | 4 |
2 files changed, 42 insertions, 1 deletions
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index aff1d22223bd..6ce5c8835efe 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -131,6 +131,7 @@ static void qca_tlv_check_data(struct rome_config *config, * In case VSE is skipped, only the last segment is acked. */ config->dnld_mode = tlv_patch->download_mode; + config->dnld_type = config->dnld_mode; BT_DBG("Total Length : %d bytes", le32_to_cpu(tlv_patch->total_size)); @@ -251,6 +252,31 @@ out: return err; } +static int qca_inject_cmd_complete_event(struct hci_dev *hdev) +{ + struct hci_event_hdr *hdr; + struct hci_ev_cmd_complete *evt; + struct sk_buff *skb; + + skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + hdr = skb_put(skb, sizeof(*hdr)); + hdr->evt = HCI_EV_CMD_COMPLETE; + hdr->plen = sizeof(*evt) + 1; + + evt = skb_put(skb, sizeof(*evt)); + evt->ncmd = 1; + evt->opcode = QCA_HCI_CC_OPCODE; + + skb_put_u8(skb, QCA_HCI_CC_SUCCESS); + + hci_skb_pkt_type(skb) = HCI_EVENT_PKT; + + return hci_recv_frame(hdev, skb); +} + static int qca_download_firmware(struct hci_dev *hdev, struct rome_config *config) { @@ -284,11 +310,22 @@ static int qca_download_firmware(struct hci_dev *hdev, ret = qca_tlv_send_segment(hdev, segsize, segment, config->dnld_mode); if (ret) - break; + goto out; segment += segsize; } + /* Latest qualcomm chipsets are not sending a command complete event + * for every fw packet sent. They only respond with a vendor specific + * event for the last packet. This optimization in the chip will + * decrease the BT in initialization time. Here we will inject a command + * complete event to avoid a command timeout error message. + */ + if (config->dnld_type == ROME_SKIP_EVT_VSE_CC || + config->dnld_type == ROME_SKIP_EVT_VSE) + return qca_inject_cmd_complete_event(hdev); + +out: release_firmware(fw); return ret; diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h index e9c999959603..03fdec20730b 100644 --- a/drivers/bluetooth/btqca.h +++ b/drivers/bluetooth/btqca.h @@ -28,6 +28,9 @@ #define QCA_WCN3990_POWERON_PULSE 0xFC #define QCA_WCN3990_POWEROFF_PULSE 0xC0 +#define QCA_HCI_CC_OPCODE 0xFC00 +#define QCA_HCI_CC_SUCCESS 0x00 + enum qca_baudrate { QCA_BAUDRATE_115200 = 0, QCA_BAUDRATE_57600, @@ -69,6 +72,7 @@ struct rome_config { char fwname[64]; uint8_t user_baud_rate; enum rome_tlv_dnld_mode dnld_mode; + enum rome_tlv_dnld_mode dnld_type; }; struct edl_event_hdr { |