Merge branch 'master' into for-next

8 files changed, 125 insertions, 136 deletions

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 6bfc1bb318f6..106d1d8e16ad 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -83,10 +83,12 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x3005) },
 	{ USB_DEVICE(0x04CA, 0x3006) },
 	{ USB_DEVICE(0x04CA, 0x3008) },
+	{ USB_DEVICE(0x04CA, 0x300b) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
 	{ USB_DEVICE(0x0CF3, 0xE005) },
 	{ USB_DEVICE(0x0930, 0x0219) },
+	{ USB_DEVICE(0x0930, 0x0220) },
 	{ USB_DEVICE(0x0489, 0xe057) },
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x0489, 0xe04e) },
@@ -96,6 +98,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3402) },
 	{ USB_DEVICE(0x0cf3, 0x3121) },
 	{ USB_DEVICE(0x0cf3, 0xe003) },
+	{ USB_DEVICE(0x0489, 0xe05f) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -125,10 +128,12 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
@@ -138,6 +143,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index f9d183387f45..7399303d7d99 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -23,8 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/slab.h>
 #include <net/bluetooth/bluetooth.h>
-#include <linux/ctype.h>
-#include <linux/firmware.h>
 
 #define BTM_HEADER_LEN			4
 #define BTM_UPLD_SIZE			2312
@@ -43,8 +41,6 @@ struct btmrvl_thread {
 struct btmrvl_device {
 	void *card;
 	struct hci_dev *hcidev;
-	struct device *dev;
-	const char *cal_data;
 
 	u8 dev_type;
 
@@ -90,12 +86,12 @@ struct btmrvl_private {
 
 #define MRVL_VENDOR_PKT			0xFE
 
-/* Bluetooth commands  */
-#define BT_CMD_AUTO_SLEEP_MODE		0x23
-#define BT_CMD_HOST_SLEEP_CONFIG	0x59
-#define BT_CMD_HOST_SLEEP_ENABLE	0x5A
-#define BT_CMD_MODULE_CFG_REQ		0x5B
-#define BT_CMD_LOAD_CONFIG_DATA		0x61
+/* Vendor specific Bluetooth commands */
+#define BT_CMD_AUTO_SLEEP_MODE		0xFC23
+#define BT_CMD_HOST_SLEEP_CONFIG	0xFC59
+#define BT_CMD_HOST_SLEEP_ENABLE	0xFC5A
+#define BT_CMD_MODULE_CFG_REQ		0xFC5B
+#define BT_CMD_LOAD_CONFIG_DATA		0xFC61
 
 /* Sub-commands: Module Bringup/Shutdown Request/Response */
 #define MODULE_BRINGUP_REQ		0xF1
@@ -104,6 +100,11 @@ struct btmrvl_private {
 
 #define MODULE_SHUTDOWN_REQ		0xF2
 
+/* Vendor specific Bluetooth events */
+#define BT_EVENT_AUTO_SLEEP_MODE	0x23
+#define BT_EVENT_HOST_SLEEP_CONFIG	0x59
+#define BT_EVENT_HOST_SLEEP_ENABLE	0x5A
+#define BT_EVENT_MODULE_CFG_REQ		0x5B
 #define BT_EVENT_POWER_STATE		0x20
 
 /* Bluetooth Power States */
@@ -111,8 +112,6 @@ struct btmrvl_private {
 #define BT_PS_DISABLE			0x03
 #define BT_PS_SLEEP			0x01
 
-#define OGF				0x3F
-
 /* Host Sleep states */
 #define HS_ACTIVATED			0x01
 #define HS_DEACTIVATED			0x00
@@ -121,7 +120,7 @@ struct btmrvl_private {
 #define PS_SLEEP			0x01
 #define PS_AWAKE			0x00
 
-#define BT_CMD_DATA_SIZE		32
+#define BT_CAL_HDR_LEN			4
 #define BT_CAL_DATA_SIZE		28
 
 struct btmrvl_event {
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 5cf31c4fe6d1..1e0320af00c6 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -19,7 +19,7 @@
  **/
 
 #include <linux/module.h>
-
+#include <linux/of.h>
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
@@ -50,12 +50,10 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
 
 	if (hdr->evt == HCI_EV_CMD_COMPLETE) {
 		struct hci_ev_cmd_complete *ec;
-		u16 opcode, ocf, ogf;
+		u16 opcode;
 
 		ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
 		opcode = __le16_to_cpu(ec->opcode);
-		ocf = hci_opcode_ocf(opcode);
-		ogf = hci_opcode_ogf(opcode);
 
 		if (priv->btmrvl_dev.sendcmdflag) {
 			priv->btmrvl_dev.sendcmdflag = false;
@@ -63,9 +61,8 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
 			wake_up_interruptible(&priv->adapter->cmd_wait_q);
 		}
 
-		if (ogf == OGF) {
-			BT_DBG("vendor event skipped: ogf 0x%4.4x ocf 0x%4.4x",
-			       ogf, ocf);
+		if (hci_opcode_ogf(opcode) == 0x3F) {
+			BT_DBG("vendor event skipped: opcode=%#4.4x", opcode);
 			kfree_skb(skb);
 			return false;
 		}
@@ -89,7 +86,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 	}
 
 	switch (event->data[0]) {
-	case BT_CMD_AUTO_SLEEP_MODE:
+	case BT_EVENT_AUTO_SLEEP_MODE:
 		if (!event->data[2]) {
 			if (event->data[1] == BT_PS_ENABLE)
 				adapter->psmode = 1;
@@ -102,7 +99,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 		}
 		break;
 
-	case BT_CMD_HOST_SLEEP_CONFIG:
+	case BT_EVENT_HOST_SLEEP_CONFIG:
 		if (!event->data[3])
 			BT_DBG("gpio=%x, gap=%x", event->data[1],
 							event->data[2]);
@@ -110,7 +107,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 			BT_DBG("HSCFG command failed");
 		break;
 
-	case BT_CMD_HOST_SLEEP_ENABLE:
+	case BT_EVENT_HOST_SLEEP_ENABLE:
 		if (!event->data[1]) {
 			adapter->hs_state = HS_ACTIVATED;
 			if (adapter->psmode)
@@ -121,7 +118,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 		}
 		break;
 
-	case BT_CMD_MODULE_CFG_REQ:
+	case BT_EVENT_MODULE_CFG_REQ:
 		if (priv->btmrvl_dev.sendcmdflag &&
 				event->data[1] == MODULE_BRINGUP_REQ) {
 			BT_DBG("EVENT:%s",
@@ -166,7 +163,7 @@ exit:
 }
 EXPORT_SYMBOL_GPL(btmrvl_process_event);
 
-static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no,
+static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 opcode,
 				const void *param, u8 len)
 {
 	struct sk_buff *skb;
@@ -179,7 +176,7 @@ static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no,
 	}
 
 	hdr = (struct hci_command_hdr *)skb_put(skb, HCI_COMMAND_HDR_SIZE);
-	hdr->opcode = cpu_to_le16(hci_opcode_pack(OGF, cmd_no));
+	hdr->opcode = cpu_to_le16(opcode);
 	hdr->plen = len;
 
 	if (len)
@@ -417,127 +414,62 @@ static int btmrvl_open(struct hci_dev *hdev)
 	return 0;
 }
 
-/*
- * This function parses provided calibration data input. It should contain
- * hex bytes separated by space or new line character. Here is an example.
- * 00 1C 01 37 FF FF FF FF 02 04 7F 01
- * CE BA 00 00 00 2D C6 C0 00 00 00 00
- * 00 F0 00 00
- */
-static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size)
+static int btmrvl_download_cal_data(struct btmrvl_private *priv,
+				    u8 *data, int len)
 {
-	const u8 *s = src;
-	u8 *d = dst;
 	int ret;
-	u8 tmp[3];
-
-	tmp[2] = '\0';
-	while ((s - src) <= len - 2) {
-		if (isspace(*s)) {
-			s++;
-			continue;
-		}
-
-		if (isxdigit(*s)) {
-			if ((d - dst) >= dst_size) {
-				BT_ERR("calibration data file too big!!!");
-				return -EINVAL;
-			}
-
-			memcpy(tmp, s, 2);
-
-			ret = kstrtou8(tmp, 16, d++);
-			if (ret < 0)
-				return ret;
-
-			s += 2;
-		} else {
-			return -EINVAL;
-		}
-	}
-	if (d == dst)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int btmrvl_load_cal_data(struct btmrvl_private *priv,
-				u8 *config_data)
-{
-	int i, ret;
-	u8 data[BT_CMD_DATA_SIZE];
 
 	data[0] = 0x00;
 	data[1] = 0x00;
 	data[2] = 0x00;
-	data[3] = BT_CMD_DATA_SIZE - 4;
-
-	/* Swap cal-data bytes. Each four bytes are swapped. Considering 4
-	 * byte SDIO header offset, mapping of input and output bytes will be
-	 * {3, 2, 1, 0} -> {0+4, 1+4, 2+4, 3+4},
-	 * {7, 6, 5, 4} -> {4+4, 5+4, 6+4, 7+4} */
-	for (i = 4; i < BT_CMD_DATA_SIZE; i++)
-		data[i] = config_data[(i / 4) * 8 - 1 - i];
+	data[3] = len;
 
 	print_hex_dump_bytes("Calibration data: ",
-			     DUMP_PREFIX_OFFSET, data, BT_CMD_DATA_SIZE);
+			     DUMP_PREFIX_OFFSET, data, BT_CAL_HDR_LEN + len);
 
 	ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,
-				   BT_CMD_DATA_SIZE);
+				   BT_CAL_HDR_LEN + len);
 	if (ret)
 		BT_ERR("Failed to download caibration data\n");
 
 	return 0;
 }
 
-static int
-btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size)
+static int btmrvl_cal_data_dt(struct btmrvl_private *priv)
 {
-	u8 cal_data[BT_CAL_DATA_SIZE];
+	struct device_node *dt_node;
+	u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
+	const char name[] = "btmrvl_caldata";
+	const char property[] = "btmrvl,caldata";
 	int ret;
 
-	ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data));
+	dt_node = of_find_node_by_name(NULL, name);
+	if (!dt_node)
+		return -ENODEV;
+
+	ret = of_property_read_u8_array(dt_node, property,
+					cal_data + BT_CAL_HDR_LEN,
+					BT_CAL_DATA_SIZE);
 	if (ret)
 		return ret;
 
-	ret = btmrvl_load_cal_data(priv, cal_data);
+	BT_DBG("Use cal data from device tree");
+	ret = btmrvl_download_cal_data(priv, cal_data, BT_CAL_DATA_SIZE);
 	if (ret) {
-		BT_ERR("Fail to load calibrate data");
+		BT_ERR("Fail to download calibrate data");
 		return ret;
 	}
 
 	return 0;
 }
 
-static int btmrvl_cal_data_config(struct btmrvl_private *priv)
-{
-	const struct firmware *cfg;
-	int ret;
-	const char *cal_data = priv->btmrvl_dev.cal_data;
-
-	if (!cal_data)
-		return 0;
-
-	ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev);
-	if (ret < 0) {
-		BT_DBG("Failed to get %s file, skipping cal data download",
-		       cal_data);
-		return 0;
-	}
-
-	ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size);
-	release_firmware(cfg);
-	return ret;
-}
-
 static int btmrvl_setup(struct hci_dev *hdev)
 {
 	struct btmrvl_private *priv = hci_get_drvdata(hdev);
 
 	btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
 
-	if (btmrvl_cal_data_config(priv))
-		BT_ERR("Set cal data failed");
+	btmrvl_cal_data_dt(priv);
 
 	priv->btmrvl_dev.psmode = 1;
 	btmrvl_enable_ps(priv);
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index fabcf5bb48af..1b52c9f5230d 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -18,6 +18,7 @@
  * this warranty disclaimer.
  **/
 
+#include <linux/firmware.h>
 #include <linux/slab.h>
 
 #include <linux/mmc/sdio_ids.h>
@@ -101,7 +102,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_8688,
 	.sd_blksz_fw_dl	= 64,
 };
@@ -109,7 +109,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8787_uapsta.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -117,7 +116,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8797_uapsta.bin",
-	.cal_data	= "mrvl/sd8797_caldata.conf",
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -125,7 +123,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8897_uapsta.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_88xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -1007,7 +1004,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 		struct btmrvl_sdio_device *data = (void *) id->driver_data;
 		card->helper = data->helper;
 		card->firmware = data->firmware;
-		card->cal_data = data->cal_data;
 		card->reg = data->reg;
 		card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
 	}
@@ -1036,8 +1032,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 	}
 
 	card->priv = priv;
-	priv->btmrvl_dev.dev = &card->func->dev;
-	priv->btmrvl_dev.cal_data = card->cal_data;
 
 	/* Initialize the interface specific function pointers */
 	priv->hw_host_to_card = btmrvl_sdio_host_to_card;
@@ -1220,5 +1214,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
 MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
-MODULE_FIRMWARE("mrvl/sd8797_caldata.conf");
 MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 6872d9ecac07..43d35a609ca9 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -85,7 +85,6 @@ struct btmrvl_sdio_card {
 	u32 ioport;
 	const char *helper;
 	const char *firmware;
-	const char *cal_data;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 	u8 rx_unit;
@@ -95,7 +94,6 @@ struct btmrvl_sdio_card {
 struct btmrvl_sdio_device {
 	const char *helper;
 	const char *firmware;
-	const char *cal_data;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 };
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index b61440aaee65..83f6437dd91d 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -73,6 +73,7 @@ struct btsdio_data {
 #define REG_CL_INTRD 0x13	/* Interrupt Clear */
 #define REG_EN_INTRD 0x14	/* Interrupt Enable */
 #define REG_MD_STAT  0x20	/* Bluetooth Mode Status */
+#define REG_MD_SET   0x20	/* Bluetooth Mode Set */
 
 static int btsdio_tx_packet(struct btsdio_data *data, struct sk_buff *skb)
 {
@@ -212,7 +213,7 @@ static int btsdio_open(struct hci_dev *hdev)
 	}
 
 	if (data->func->class == SDIO_CLASS_BT_B)
-		sdio_writeb(data->func, 0x00, REG_MD_STAT, NULL);
+		sdio_writeb(data->func, 0x00, REG_MD_SET, NULL);
 
 	sdio_writeb(data->func, 0x01, REG_EN_INTRD, NULL);
 
@@ -333,6 +334,9 @@ static int btsdio_probe(struct sdio_func *func,
 	hdev->flush    = btsdio_flush;
 	hdev->send     = btsdio_send_frame;
 
+	if (func->vendor == 0x0104 && func->device == 0x00c5)
+		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
 	err = hci_register_dev(hdev);
 	if (err < 0) {
 		hci_free_dev(hdev);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c0ff34f2d2df..baeaaed299e4 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -150,10 +150,12 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
@@ -163,6 +165,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -223,6 +226,7 @@ static const struct usb_device_id blacklist_table[] = {
 
 	/* Intel Bluetooth device */
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
+	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
 
 	{ }	/* Terminating entry */
 };
@@ -961,6 +965,45 @@ static int btusb_setup_bcm92035(struct hci_dev *hdev)
 	return 0;
 }
 
+static int btusb_setup_csr(struct hci_dev *hdev)
+{
+	struct hci_rp_read_local_version *rp;
+	struct sk_buff *skb;
+	int ret;
+
+	BT_DBG("%s", hdev->name);
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("Reading local version failed (%ld)", -PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+
+	rp = (struct hci_rp_read_local_version *) skb->data;
+
+	if (!rp->status) {
+		if (le16_to_cpu(rp->manufacturer) != 10) {
+			/* Clear the reset quirk since this is not an actual
+			 * early Bluetooth 1.1 device from CSR.
+			 */
+			clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+			/* These fake CSR controllers have all a broken
+			 * stored link key handling and so just disable it.
+			 */
+			set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY,
+				&hdev->quirks);
+		}
+	}
+
+	ret = -bt_to_errno(rp->status);
+
+	kfree_skb(skb);
+
+	return ret;
+}
+
 struct intel_version {
 	u8 status;
 	u8 hw_platform;
@@ -1435,8 +1478,10 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_BCM92035)
 		hdev->setup = btusb_setup_bcm92035;
 
-	if (id->driver_info & BTUSB_INTEL)
+	if (id->driver_info & BTUSB_INTEL) {
+		usb_enable_autosuspend(data->udev);
 		hdev->setup = btusb_setup_intel;
+	}
 
 	/* Interface numbers are hardcoded in the specification */
 	data->isoc = usb_ifnum_to_if(data->udev, 1);
@@ -1459,10 +1504,15 @@ static int btusb_probe(struct usb_interface *intf,
 
 	if (id->driver_info & BTUSB_CSR) {
 		struct usb_device *udev = data->udev;
+		u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
 
 		/* Old firmware would otherwise execute USB reset */
-		if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117)
+		if (bcdDevice < 0x117)
 			set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+		/* Fake CSR devices with broken commands */
+		if (bcdDevice <= 0x100)
+			hdev->setup = btusb_setup_csr;
 	}
 
 	if (id->driver_info & BTUSB_SNIFFER) {
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 7b167385a1c4..1ef6990a5c7e 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -141,22 +141,28 @@ static int vhci_create_device(struct vhci_data *data, __u8 dev_type)
 }
 
 static inline ssize_t vhci_get_user(struct vhci_data *data,
-				    const char __user *buf, size_t count)
+				    const struct iovec *iov,
+				    unsigned long count)
 {
+	size_t len = iov_length(iov, count);
 	struct sk_buff *skb;
 	__u8 pkt_type, dev_type;
+	unsigned long i;
 	int ret;
 
-	if (count < 2 || count > HCI_MAX_FRAME_SIZE)
+	if (len < 2 || len > HCI_MAX_FRAME_SIZE)
 		return -EINVAL;
 
-	skb = bt_skb_alloc(count, GFP_KERNEL);
+	skb = bt_skb_alloc(len, GFP_KERNEL);
 	if (!skb)
 		return -ENOMEM;
 
-	if (copy_from_user(skb_put(skb, count), buf, count)) {
-		kfree_skb(skb);
-		return -EFAULT;
+	for (i = 0; i < count; i++) {
+		if (copy_from_user(skb_put(skb, iov[i].iov_len),
+				   iov[i].iov_base, iov[i].iov_len)) {
+			kfree_skb(skb);
+			return -EFAULT;
+		}
 	}
 
 	pkt_type = *((__u8 *) skb->data);
@@ -205,7 +211,7 @@ static inline ssize_t vhci_get_user(struct vhci_data *data,
 		return -EINVAL;
 	}
 
-	return (ret < 0) ? ret : count;
+	return (ret < 0) ? ret : len;
 }
 
 static inline ssize_t vhci_put_user(struct vhci_data *data,
@@ -272,12 +278,13 @@ static ssize_t vhci_read(struct file *file,
 	return ret;
 }
 
-static ssize_t vhci_write(struct file *file,
-			  const char __user *buf, size_t count, loff_t *pos)
+static ssize_t vhci_write(struct kiocb *iocb, const struct iovec *iov,
+			  unsigned long count, loff_t pos)
 {
+	struct file *file = iocb->ki_filp;
 	struct vhci_data *data = file->private_data;
 
-	return vhci_get_user(data, buf, count);
+	return vhci_get_user(data, iov, count);
 }
 
 static unsigned int vhci_poll(struct file *file, poll_table *wait)
@@ -342,7 +349,7 @@ static int vhci_release(struct inode *inode, struct file *file)
 static const struct file_operations vhci_fops = {
 	.owner		= THIS_MODULE,
 	.read		= vhci_read,
-	.write		= vhci_write,
+	.aio_write	= vhci_write,
 	.poll		= vhci_poll,
 	.open		= vhci_open,
 	.release	= vhci_release,