Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c

1 files changed, 57 insertions, 35 deletions

diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 53a43adf2e21..ee37ef0caee2 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -66,7 +66,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 {
 	struct btmrvl_adapter *adapter = priv->adapter;
 	struct btmrvl_event *event;
-	u8 ret = 0;
+	int ret = 0;
 
 	event = (struct btmrvl_event *) skb->data;
 	if (event->ec != 0xff) {
@@ -112,8 +112,17 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
 	case BT_CMD_MODULE_CFG_REQ:
 		if (priv->btmrvl_dev.sendcmdflag &&
 				event->data[1] == MODULE_BRINGUP_REQ) {
-			BT_DBG("EVENT:%s", (event->data[2]) ?
-				"Bring-up failed" : "Bring-up succeed");
+			BT_DBG("EVENT:%s",
+				((event->data[2] == MODULE_BROUGHT_UP) ||
+				(event->data[2] == MODULE_ALREADY_UP)) ?
+				"Bring-up succeed" : "Bring-up failed");
+
+			if (event->length > 3)
+				priv->btmrvl_dev.dev_type = event->data[3];
+			else
+				priv->btmrvl_dev.dev_type = HCI_BREDR;
+
+			BT_DBG("dev_type: %d", priv->btmrvl_dev.dev_type);
 		} else if (priv->btmrvl_dev.sendcmdflag &&
 				event->data[1] == MODULE_SHUTDOWN_REQ) {
 			BT_DBG("EVENT:%s", (event->data[2]) ?
@@ -522,47 +531,20 @@ static int btmrvl_service_main_thread(void *data)
 	return 0;
 }
 
-struct btmrvl_private *btmrvl_add_card(void *card)
+int btmrvl_register_hdev(struct btmrvl_private *priv)
 {
 	struct hci_dev *hdev = NULL;
-	struct btmrvl_private *priv;
 	int ret;
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		BT_ERR("Can not allocate priv");
-		goto err_priv;
-	}
-
-	priv->adapter = kzalloc(sizeof(*priv->adapter), GFP_KERNEL);
-	if (!priv->adapter) {
-		BT_ERR("Allocate buffer for btmrvl_adapter failed!");
-		goto err_adapter;
-	}
-
-	btmrvl_init_adapter(priv);
-
 	hdev = hci_alloc_dev();
 	if (!hdev) {
 		BT_ERR("Can not allocate HCI device");
 		goto err_hdev;
 	}
 
-	BT_DBG("Starting kthread...");
-	priv->main_thread.priv = priv;
-	spin_lock_init(&priv->driver_lock);
-
-	init_waitqueue_head(&priv->main_thread.wait_q);
-	priv->main_thread.task = kthread_run(btmrvl_service_main_thread,
-				&priv->main_thread, "btmrvl_main_service");
-
 	priv->btmrvl_dev.hcidev = hdev;
-	priv->btmrvl_dev.card = card;
-
 	hdev->driver_data = priv;
 
-	priv->btmrvl_dev.tx_dnld_rdy = true;
-
 	hdev->bus = HCI_SDIO;
 	hdev->open = btmrvl_open;
 	hdev->close = btmrvl_close;
@@ -572,6 +554,10 @@ struct btmrvl_private *btmrvl_add_card(void *card)
 	hdev->ioctl = btmrvl_ioctl;
 	hdev->owner = THIS_MODULE;
 
+	btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+
+	hdev->dev_type = priv->btmrvl_dev.dev_type;
+
 	ret = hci_register_dev(hdev);
 	if (ret < 0) {
 		BT_ERR("Can not register HCI device");
@@ -582,16 +568,52 @@ struct btmrvl_private *btmrvl_add_card(void *card)
 	btmrvl_debugfs_init(hdev);
 #endif
 
-	return priv;
+	return 0;
 
 err_hci_register_dev:
-	/* Stop the thread servicing the interrupts */
-	kthread_stop(priv->main_thread.task);
-
 	hci_free_dev(hdev);
 
 err_hdev:
+	/* Stop the thread servicing the interrupts */
+	kthread_stop(priv->main_thread.task);
+
 	btmrvl_free_adapter(priv);
+	kfree(priv);
+
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(btmrvl_register_hdev);
+
+struct btmrvl_private *btmrvl_add_card(void *card)
+{
+	struct btmrvl_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		BT_ERR("Can not allocate priv");
+		goto err_priv;
+	}
+
+	priv->adapter = kzalloc(sizeof(*priv->adapter), GFP_KERNEL);
+	if (!priv->adapter) {
+		BT_ERR("Allocate buffer for btmrvl_adapter failed!");
+		goto err_adapter;
+	}
+
+	btmrvl_init_adapter(priv);
+
+	BT_DBG("Starting kthread...");
+	priv->main_thread.priv = priv;
+	spin_lock_init(&priv->driver_lock);
+
+	init_waitqueue_head(&priv->main_thread.wait_q);
+	priv->main_thread.task = kthread_run(btmrvl_service_main_thread,
+				&priv->main_thread, "btmrvl_main_service");
+
+	priv->btmrvl_dev.card = card;
+	priv->btmrvl_dev.tx_dnld_rdy = true;
+
+	return priv;
 
 err_adapter:
 	kfree(priv);