Merge branch 'for-3.9/drivers' of git://git.kernel.dk/linux-block

Pull block driver bits from Jens Axboe:
 "After the block IO core bits are in, please grab the driver updates
  from below as well.  It contains:

   - Fix ancient regression in dac960.  Nobody must be using that
     anymore...

   - Some good fixes from Guo Ghao for loop, fixing both potential
     oopses and deadlocks.

   - Improve mtip32xx for NUMA systems, by being a bit more clever in
     distributing work.

   - Add IBM RamSan 70/80 driver.  A second round of fixes for that is
     pending, that will come in through for-linus during the 3.9 cycle
     as per usual.

   - A few xen-blk{back,front} fixes from Konrad and Roger.

   - Other minor fixes and improvements."

* 'for-3.9/drivers' of git://git.kernel.dk/linux-block:
  loopdev: ignore negative offset when calculate loop device size
  loopdev: remove an user triggerable oops
  loopdev: move common code into loop_figure_size()
  loopdev: update block device size in loop_set_status()
  loopdev: fix a deadlock
  xen-blkback: use balloon pages for persistent grants
  xen-blkfront: drop the use of llist_for_each_entry_safe
  xen/blkback: Don't trust the handle from the frontend.
  xen-blkback: do not leak mode property
  block: IBM RamSan 70/80 driver fixes
  rsxx: add slab.h include to dma.c
  drivers/block/mtip32xx: add missing GENERIC_HARDIRQS dependency
  block: remove new __devinit/exit annotations on ramsam driver
  block: IBM RamSan 70/80 device driver
  drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static?
  drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static?
  dac960: return success instead of -ENOTTY
  mtip32xx: add trim support
  mtip32xx: Add workqueue and NUMA support
  block: delete super ancient PC-XT driver for 1980's hardware

1 files changed, 29 insertions, 32 deletions

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index f47dccbda1d4..747bb2af69dc 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -162,12 +162,13 @@ static struct loop_func_table *xfer_funcs[MAX_LO_CRYPT] = {
 
 static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file)
 {
-	loff_t size, loopsize;
+	loff_t loopsize;
 
 	/* Compute loopsize in bytes */
-	size = i_size_read(file->f_mapping->host);
-	loopsize = size - offset;
-	/* offset is beyond i_size, wierd but possible */
+	loopsize = i_size_read(file->f_mapping->host);
+	if (offset > 0)
+		loopsize -= offset;
+	/* offset is beyond i_size, weird but possible */
 	if (loopsize < 0)
 		return 0;
 
@@ -190,6 +191,7 @@ figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit)
 {
 	loff_t size = get_size(offset, sizelimit, lo->lo_backing_file);
 	sector_t x = (sector_t)size;
+	struct block_device *bdev = lo->lo_device;
 
 	if (unlikely((loff_t)x != size))
 		return -EFBIG;
@@ -198,6 +200,9 @@ figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit)
 	if (lo->lo_sizelimit != sizelimit)
 		lo->lo_sizelimit = sizelimit;
 	set_capacity(lo->lo_disk, x);
+	bd_set_size(bdev, (loff_t)get_capacity(bdev->bd_disk) << 9);
+	/* let user-space know about the new size */
+	kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
 	return 0;
 }
 
@@ -1091,10 +1096,10 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info)
 		return err;
 
 	if (lo->lo_offset != info->lo_offset ||
-	    lo->lo_sizelimit != info->lo_sizelimit) {
+	    lo->lo_sizelimit != info->lo_sizelimit)
 		if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit))
 			return -EFBIG;
-	}
+
 	loop_config_discard(lo);
 
 	memcpy(lo->lo_file_name, info->lo_file_name, LO_NAME_SIZE);
@@ -1271,28 +1276,10 @@ loop_get_status64(struct loop_device *lo, struct loop_info64 __user *arg) {
 
 static int loop_set_capacity(struct loop_device *lo, struct block_device *bdev)
 {
-	int err;
-	sector_t sec;
-	loff_t sz;
-
-	err = -ENXIO;
 	if (unlikely(lo->lo_state != Lo_bound))
-		goto out;
-	err = figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit);
-	if (unlikely(err))
-		goto out;
-	sec = get_capacity(lo->lo_disk);
-	/* the width of sector_t may be narrow for bit-shift */
-	sz = sec;
-	sz <<= 9;
-	mutex_lock(&bdev->bd_mutex);
-	bd_set_size(bdev, sz);
-	/* let user-space know about the new size */
-	kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
-	mutex_unlock(&bdev->bd_mutex);
+		return -ENXIO;
 
- out:
-	return err;
+	return figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit);
 }
 
 static int lo_ioctl(struct block_device *bdev, fmode_t mode,
@@ -1845,11 +1832,15 @@ static int __init loop_init(void)
 		max_part = (1UL << part_shift) - 1;
 	}
 
-	if ((1UL << part_shift) > DISK_MAX_PARTS)
-		return -EINVAL;
+	if ((1UL << part_shift) > DISK_MAX_PARTS) {
+		err = -EINVAL;
+		goto misc_out;
+	}
 
-	if (max_loop > 1UL << (MINORBITS - part_shift))
-		return -EINVAL;
+	if (max_loop > 1UL << (MINORBITS - part_shift)) {
+		err = -EINVAL;
+		goto misc_out;
+	}
 
 	/*
 	 * If max_loop is specified, create that many devices upfront.
@@ -1867,8 +1858,10 @@ static int __init loop_init(void)
 		range = 1UL << MINORBITS;
 	}
 
-	if (register_blkdev(LOOP_MAJOR, "loop"))
-		return -EIO;
+	if (register_blkdev(LOOP_MAJOR, "loop")) {
+		err = -EIO;
+		goto misc_out;
+	}
 
 	blk_register_region(MKDEV(LOOP_MAJOR, 0), range,
 				  THIS_MODULE, loop_probe, NULL, NULL);
@@ -1881,6 +1874,10 @@ static int __init loop_init(void)
 
 	printk(KERN_INFO "loop: module loaded\n");
 	return 0;
+
+misc_out:
+	misc_deregister(&loop_misc);
+	return err;
 }
 
 static int loop_exit_cb(int id, void *ptr, void *data)