regmap: Add regmap_noinc_write API

The regmap API had a noinc_read function added for instances where devices
supported returning data from an internal FIFO in a single read.

This commit adds the noinc_write variant to allow writing to a non
incrementing register, this is used in devices such as the sx1301 for
loading firmware.

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

2 files changed, 80 insertions, 0 deletions

diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index a6bf34d6394e..404f123cbe55 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -94,11 +94,13 @@ struct regmap {
 	bool (*readable_reg)(struct device *dev, unsigned int reg);
 	bool (*volatile_reg)(struct device *dev, unsigned int reg);
 	bool (*precious_reg)(struct device *dev, unsigned int reg);
+	bool (*writeable_noinc_reg)(struct device *dev, unsigned int reg);
 	bool (*readable_noinc_reg)(struct device *dev, unsigned int reg);
 	const struct regmap_access_table *wr_table;
 	const struct regmap_access_table *rd_table;
 	const struct regmap_access_table *volatile_table;
 	const struct regmap_access_table *precious_table;
+	const struct regmap_access_table *wr_noinc_table;
 	const struct regmap_access_table *rd_noinc_table;
 
 	int (*reg_read)(void *context, unsigned int reg, unsigned int *val);
@@ -183,6 +185,7 @@ bool regmap_writeable(struct regmap *map, unsigned int reg);
 bool regmap_readable(struct regmap *map, unsigned int reg);
 bool regmap_volatile(struct regmap *map, unsigned int reg);
 bool regmap_precious(struct regmap *map, unsigned int reg);
+bool regmap_writeable_noinc(struct regmap *map, unsigned int reg);
 bool regmap_readable_noinc(struct regmap *map, unsigned int reg);
 
 int _regmap_write(struct regmap *map, unsigned int reg,
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 0360a90ad6b6..d4f1fc642600 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -168,6 +168,17 @@ bool regmap_precious(struct regmap *map, unsigned int reg)
 	return false;
 }
 
+bool regmap_writeable_noinc(struct regmap *map, unsigned int reg)
+{
+	if (map->writeable_noinc_reg)
+		return map->writeable_noinc_reg(map->dev, reg);
+
+	if (map->wr_noinc_table)
+		return regmap_check_range_table(map, reg, map->wr_noinc_table);
+
+	return true;
+}
+
 bool regmap_readable_noinc(struct regmap *map, unsigned int reg)
 {
 	if (map->readable_noinc_reg)
@@ -777,11 +788,13 @@ struct regmap *__regmap_init(struct device *dev,
 	map->rd_table = config->rd_table;
 	map->volatile_table = config->volatile_table;
 	map->precious_table = config->precious_table;
+	map->wr_noinc_table = config->wr_noinc_table;
 	map->rd_noinc_table = config->rd_noinc_table;
 	map->writeable_reg = config->writeable_reg;
 	map->readable_reg = config->readable_reg;
 	map->volatile_reg = config->volatile_reg;
 	map->precious_reg = config->precious_reg;
+	map->writeable_noinc_reg = config->writeable_noinc_reg;
 	map->readable_noinc_reg = config->readable_noinc_reg;
 	map->cache_type = config->cache_type;
 
@@ -1298,6 +1311,7 @@ int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config)
 	map->readable_reg = config->readable_reg;
 	map->volatile_reg = config->volatile_reg;
 	map->precious_reg = config->precious_reg;
+	map->writeable_noinc_reg = config->writeable_noinc_reg;
 	map->readable_noinc_reg = config->readable_noinc_reg;
 	map->cache_type = config->cache_type;
 
@@ -1898,6 +1912,69 @@ int regmap_raw_write(struct regmap *map, unsigned int reg,
 EXPORT_SYMBOL_GPL(regmap_raw_write);
 
 /**
+ * regmap_noinc_write(): Write data from a register without incrementing the
+ *			register number
+ *
+ * @map: Register map to write to
+ * @reg: Register to write to
+ * @val: Pointer to data buffer
+ * @val_len: Length of output buffer in bytes.
+ *
+ * The regmap API usually assumes that bulk bus write operations will write a
+ * range of registers. Some devices have certain registers for which a write
+ * operation can write to an internal FIFO.
+ *
+ * The target register must be volatile but registers after it can be
+ * completely unrelated cacheable registers.
+ *
+ * This will attempt multiple writes as required to write val_len bytes.
+ *
+ * A value of zero will be returned on success, a negative errno will be
+ * returned in error cases.
+ */
+int regmap_noinc_write(struct regmap *map, unsigned int reg,
+		      const void *val, size_t val_len)
+{
+	size_t write_len;
+	int ret;
+
+	if (!map->bus)
+		return -EINVAL;
+	if (!map->bus->write)
+		return -ENOTSUPP;
+	if (val_len % map->format.val_bytes)
+		return -EINVAL;
+	if (!IS_ALIGNED(reg, map->reg_stride))
+		return -EINVAL;
+	if (val_len == 0)
+		return -EINVAL;
+
+	map->lock(map->lock_arg);
+
+	if (!regmap_volatile(map, reg) || !regmap_writeable_noinc(map, reg)) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	while (val_len) {
+		if (map->max_raw_write && map->max_raw_write < val_len)
+			write_len = map->max_raw_write;
+		else
+			write_len = val_len;
+		ret = _regmap_raw_write(map, reg, val, write_len);
+		if (ret)
+			goto out_unlock;
+		val = ((u8 *)val) + write_len;
+		val_len -= write_len;
+	}
+
+out_unlock:
+	map->unlock(map->lock_arg);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regmap_noinc_write);
+
+/**
  * regmap_field_update_bits_base() - Perform a read/modify/write cycle a
  *                                   register field.
  *