Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "A handful of new RISC-V related patches for this merge window:

   - A check to ensure drivers are properly using uaccess. This isn't
     manifesting with any of the drivers I'm currently using, but may
     catch errors in new drivers.

   - Some preliminary support for the FU740, along with the HiFive
     Unleashed it will appear on.

   - NUMA support for RISC-V, which involves making the arm64 code
     generic.

   - Support for kasan on the vmalloc region.

   - A handful of new drivers for the Kendryte K210, along with the DT
     plumbing required to boot on a handful of K210-based boards.

   - Support for allocating ASIDs.

   - Preliminary support for kernels larger than 128MiB.

   - Various other improvements to our KASAN support, including the
     utilization of huge pages when allocating the KASAN regions.

  We may have already found a bug with the KASAN_VMALLOC code, but it's
  passing my tests. There's a fix in the works, but that will probably
  miss the merge window.

* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
  riscv: Improve kasan population by using hugepages when possible
  riscv: Improve kasan population function
  riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
  riscv: Improve kasan definitions
  riscv: Get rid of MAX_EARLY_MAPPING_SIZE
  soc: canaan: Sort the Makefile alphabetically
  riscv: Disable KSAN_SANITIZE for vDSO
  riscv: Remove unnecessary declaration
  riscv: Add Canaan Kendryte K210 SD card defconfig
  riscv: Update Canaan Kendryte K210 defconfig
  riscv: Add Kendryte KD233 board device tree
  riscv: Add SiPeed MAIXDUINO board device tree
  riscv: Add SiPeed MAIX GO board device tree
  riscv: Add SiPeed MAIX DOCK board device tree
  riscv: Add SiPeed MAIX BiT board device tree
  riscv: Update Canaan Kendryte K210 device tree
  dt-bindings: add resets property to dw-apb-timer
  dt-bindings: fix sifive gpio properties
  dt-bindings: update sifive uart compatible string
  dt-bindings: update sifive clint compatible string
  ...

3 files changed, 491 insertions, 0 deletions

diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 324aa03fed3c..ffcbe2bc460e 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -213,4 +213,10 @@ config GENERIC_ARCH_TOPOLOGY
 	  appropriate scaling, sysfs interface for reading capacity values at
 	  runtime.
 
+config GENERIC_ARCH_NUMA
+	bool
+	help
+	  Enable support for generic NUMA implementation. Currently, RISC-V
+	  and ARM64 use it.
+
 endmenu
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 5e7bf9669a81..8b93a7f291ec 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_PINCTRL) += pinctrl.o
 obj-$(CONFIG_DEV_COREDUMP) += devcoredump.o
 obj-$(CONFIG_GENERIC_MSI_IRQ_DOMAIN) += platform-msi.o
 obj-$(CONFIG_GENERIC_ARCH_TOPOLOGY) += arch_topology.o
+obj-$(CONFIG_GENERIC_ARCH_NUMA) += arch_numa.o
 
 obj-y			+= test/
 
diff --git a/drivers/base/arch_numa.c b/drivers/base/arch_numa.c
new file mode 100644
index 000000000000..4cc4e117727d
--- /dev/null
+++ b/drivers/base/arch_numa.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NUMA support, based on the x86 implementation.
+ *
+ * Copyright (C) 2015 Cavium Inc.
+ * Author: Ganapatrao Kulkarni <gkulkarni@cavium.com>
+ */
+
+#define pr_fmt(fmt) "NUMA: " fmt
+
+#include <linux/acpi.h>
+#include <linux/memblock.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/sections.h>
+
+struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+nodemask_t numa_nodes_parsed __initdata;
+static int cpu_to_node_map[NR_CPUS] = { [0 ... NR_CPUS-1] = NUMA_NO_NODE };
+
+static int numa_distance_cnt;
+static u8 *numa_distance;
+bool numa_off;
+
+static __init int numa_parse_early_param(char *opt)
+{
+	if (!opt)
+		return -EINVAL;
+	if (str_has_prefix(opt, "off"))
+		numa_off = true;
+
+	return 0;
+}
+early_param("numa", numa_parse_early_param);
+
+cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
+EXPORT_SYMBOL(node_to_cpumask_map);
+
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+
+/*
+ * Returns a pointer to the bitmask of CPUs on Node 'node'.
+ */
+const struct cpumask *cpumask_of_node(int node)
+{
+
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
+	if (WARN_ON(node < 0 || node >= nr_node_ids))
+		return cpu_none_mask;
+
+	if (WARN_ON(node_to_cpumask_map[node] == NULL))
+		return cpu_online_mask;
+
+	return node_to_cpumask_map[node];
+}
+EXPORT_SYMBOL(cpumask_of_node);
+
+#endif
+
+static void numa_update_cpu(unsigned int cpu, bool remove)
+{
+	int nid = cpu_to_node(cpu);
+
+	if (nid == NUMA_NO_NODE)
+		return;
+
+	if (remove)
+		cpumask_clear_cpu(cpu, node_to_cpumask_map[nid]);
+	else
+		cpumask_set_cpu(cpu, node_to_cpumask_map[nid]);
+}
+
+void numa_add_cpu(unsigned int cpu)
+{
+	numa_update_cpu(cpu, false);
+}
+
+void numa_remove_cpu(unsigned int cpu)
+{
+	numa_update_cpu(cpu, true);
+}
+
+void numa_clear_node(unsigned int cpu)
+{
+	numa_remove_cpu(cpu);
+	set_cpu_numa_node(cpu, NUMA_NO_NODE);
+}
+
+/*
+ * Allocate node_to_cpumask_map based on number of available nodes
+ * Requires node_possible_map to be valid.
+ *
+ * Note: cpumask_of_node() is not valid until after this is done.
+ * (Use CONFIG_DEBUG_PER_CPU_MAPS to check this.)
+ */
+static void __init setup_node_to_cpumask_map(void)
+{
+	int node;
+
+	/* setup nr_node_ids if not done yet */
+	if (nr_node_ids == MAX_NUMNODES)
+		setup_nr_node_ids();
+
+	/* allocate and clear the mapping */
+	for (node = 0; node < nr_node_ids; node++) {
+		alloc_bootmem_cpumask_var(&node_to_cpumask_map[node]);
+		cpumask_clear(node_to_cpumask_map[node]);
+	}
+
+	/* cpumask_of_node() will now work */
+	pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids);
+}
+
+/*
+ * Set the cpu to node and mem mapping
+ */
+void numa_store_cpu_info(unsigned int cpu)
+{
+	set_cpu_numa_node(cpu, cpu_to_node_map[cpu]);
+}
+
+void __init early_map_cpu_to_node(unsigned int cpu, int nid)
+{
+	/* fallback to node 0 */
+	if (nid < 0 || nid >= MAX_NUMNODES || numa_off)
+		nid = 0;
+
+	cpu_to_node_map[cpu] = nid;
+
+	/*
+	 * We should set the numa node of cpu0 as soon as possible, because it
+	 * has already been set up online before. cpu_to_node(0) will soon be
+	 * called.
+	 */
+	if (!cpu)
+		set_cpu_numa_node(cpu, nid);
+}
+
+#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+
+static int __init early_cpu_to_node(int cpu)
+{
+	return cpu_to_node_map[cpu];
+}
+
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+	return node_distance(early_cpu_to_node(from), early_cpu_to_node(to));
+}
+
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size,
+				       size_t align)
+{
+	int nid = early_cpu_to_node(cpu);
+
+	return  memblock_alloc_try_nid(size, align,
+			__pa(MAX_DMA_ADDRESS), MEMBLOCK_ALLOC_ACCESSIBLE, nid);
+}
+
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+	memblock_free_early(__pa(ptr), size);
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	unsigned long delta;
+	unsigned int cpu;
+	int rc;
+
+	/*
+	 * Always reserve area for module percpu variables.  That's
+	 * what the legacy allocator did.
+	 */
+	rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+				    PERCPU_DYNAMIC_RESERVE, PAGE_SIZE,
+				    pcpu_cpu_distance,
+				    pcpu_fc_alloc, pcpu_fc_free);
+	if (rc < 0)
+		panic("Failed to initialize percpu areas.");
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu)
+		__per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
+}
+#endif
+
+/**
+ * numa_add_memblk() - Set node id to memblk
+ * @nid: NUMA node ID of the new memblk
+ * @start: Start address of the new memblk
+ * @end:  End address of the new memblk
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int __init numa_add_memblk(int nid, u64 start, u64 end)
+{
+	int ret;
+
+	ret = memblock_set_node(start, (end - start), &memblock.memory, nid);
+	if (ret < 0) {
+		pr_err("memblock [0x%llx - 0x%llx] failed to add on node %d\n",
+			start, (end - 1), nid);
+		return ret;
+	}
+
+	node_set(nid, numa_nodes_parsed);
+	return ret;
+}
+
+/*
+ * Initialize NODE_DATA for a node on the local memory
+ */
+static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
+{
+	const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES);
+	u64 nd_pa;
+	void *nd;
+	int tnid;
+
+	if (start_pfn >= end_pfn)
+		pr_info("Initmem setup node %d [<memory-less node>]\n", nid);
+
+	nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
+	if (!nd_pa)
+		panic("Cannot allocate %zu bytes for node %d data\n",
+		      nd_size, nid);
+
+	nd = __va(nd_pa);
+
+	/* report and initialize */
+	pr_info("NODE_DATA [mem %#010Lx-%#010Lx]\n",
+		nd_pa, nd_pa + nd_size - 1);
+	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
+	if (tnid != nid)
+		pr_info("NODE_DATA(%d) on node %d\n", nid, tnid);
+
+	node_data[nid] = nd;
+	memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
+	NODE_DATA(nid)->node_id = nid;
+	NODE_DATA(nid)->node_start_pfn = start_pfn;
+	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
+}
+
+/*
+ * numa_free_distance
+ *
+ * The current table is freed.
+ */
+void __init numa_free_distance(void)
+{
+	size_t size;
+
+	if (!numa_distance)
+		return;
+
+	size = numa_distance_cnt * numa_distance_cnt *
+		sizeof(numa_distance[0]);
+
+	memblock_free(__pa(numa_distance), size);
+	numa_distance_cnt = 0;
+	numa_distance = NULL;
+}
+
+/*
+ * Create a new NUMA distance table.
+ */
+static int __init numa_alloc_distance(void)
+{
+	size_t size;
+	u64 phys;
+	int i, j;
+
+	size = nr_node_ids * nr_node_ids * sizeof(numa_distance[0]);
+	phys = memblock_find_in_range(0, PFN_PHYS(max_pfn),
+				      size, PAGE_SIZE);
+	if (WARN_ON(!phys))
+		return -ENOMEM;
+
+	memblock_reserve(phys, size);
+
+	numa_distance = __va(phys);
+	numa_distance_cnt = nr_node_ids;
+
+	/* fill with the default distances */
+	for (i = 0; i < numa_distance_cnt; i++)
+		for (j = 0; j < numa_distance_cnt; j++)
+			numa_distance[i * numa_distance_cnt + j] = i == j ?
+				LOCAL_DISTANCE : REMOTE_DISTANCE;
+
+	pr_debug("Initialized distance table, cnt=%d\n", numa_distance_cnt);
+
+	return 0;
+}
+
+/**
+ * numa_set_distance() - Set inter node NUMA distance from node to node.
+ * @from: the 'from' node to set distance
+ * @to: the 'to'  node to set distance
+ * @distance: NUMA distance
+ *
+ * Set the distance from node @from to @to to @distance.
+ * If distance table doesn't exist, a warning is printed.
+ *
+ * If @from or @to is higher than the highest known node or lower than zero
+ * or @distance doesn't make sense, the call is ignored.
+ */
+void __init numa_set_distance(int from, int to, int distance)
+{
+	if (!numa_distance) {
+		pr_warn_once("Warning: distance table not allocated yet\n");
+		return;
+	}
+
+	if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
+			from < 0 || to < 0) {
+		pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
+			    from, to, distance);
+		return;
+	}
+
+	if ((u8)distance != distance ||
+	    (from == to && distance != LOCAL_DISTANCE)) {
+		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+			     from, to, distance);
+		return;
+	}
+
+	numa_distance[from * numa_distance_cnt + to] = distance;
+}
+
+/*
+ * Return NUMA distance @from to @to
+ */
+int __node_distance(int from, int to)
+{
+	if (from >= numa_distance_cnt || to >= numa_distance_cnt)
+		return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
+	return numa_distance[from * numa_distance_cnt + to];
+}
+EXPORT_SYMBOL(__node_distance);
+
+static int __init numa_register_nodes(void)
+{
+	int nid;
+	struct memblock_region *mblk;
+
+	/* Check that valid nid is set to memblks */
+	for_each_mem_region(mblk) {
+		int mblk_nid = memblock_get_region_node(mblk);
+		phys_addr_t start = mblk->base;
+		phys_addr_t end = mblk->base + mblk->size - 1;
+
+		if (mblk_nid == NUMA_NO_NODE || mblk_nid >= MAX_NUMNODES) {
+			pr_warn("Warning: invalid memblk node %d [mem %pap-%pap]\n",
+				mblk_nid, &start, &end);
+			return -EINVAL;
+		}
+	}
+
+	/* Finally register nodes. */
+	for_each_node_mask(nid, numa_nodes_parsed) {
+		unsigned long start_pfn, end_pfn;
+
+		get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+		setup_node_data(nid, start_pfn, end_pfn);
+		node_set_online(nid);
+	}
+
+	/* Setup online nodes to actual nodes*/
+	node_possible_map = numa_nodes_parsed;
+
+	return 0;
+}
+
+static int __init numa_init(int (*init_func)(void))
+{
+	int ret;
+
+	nodes_clear(numa_nodes_parsed);
+	nodes_clear(node_possible_map);
+	nodes_clear(node_online_map);
+
+	ret = numa_alloc_distance();
+	if (ret < 0)
+		return ret;
+
+	ret = init_func();
+	if (ret < 0)
+		goto out_free_distance;
+
+	if (nodes_empty(numa_nodes_parsed)) {
+		pr_info("No NUMA configuration found\n");
+		ret = -EINVAL;
+		goto out_free_distance;
+	}
+
+	ret = numa_register_nodes();
+	if (ret < 0)
+		goto out_free_distance;
+
+	setup_node_to_cpumask_map();
+
+	return 0;
+out_free_distance:
+	numa_free_distance();
+	return ret;
+}
+
+/**
+ * dummy_numa_init() - Fallback dummy NUMA init
+ *
+ * Used if there's no underlying NUMA architecture, NUMA initialization
+ * fails, or NUMA is disabled on the command line.
+ *
+ * Must online at least one node (node 0) and add memory blocks that cover all
+ * allowed memory. It is unlikely that this function fails.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+static int __init dummy_numa_init(void)
+{
+	phys_addr_t start = memblock_start_of_DRAM();
+	phys_addr_t end = memblock_end_of_DRAM() - 1;
+	int ret;
+
+	if (numa_off)
+		pr_info("NUMA disabled\n"); /* Forced off on command line. */
+	pr_info("Faking a node at [mem %pap-%pap]\n", &start, &end);
+
+	ret = numa_add_memblk(0, start, end + 1);
+	if (ret) {
+		pr_err("NUMA init failed\n");
+		return ret;
+	}
+
+	numa_off = true;
+	return 0;
+}
+
+#ifdef CONFIG_ACPI_NUMA
+static int __init arch_acpi_numa_init(void)
+{
+	int ret;
+
+	ret = acpi_numa_init();
+	if (ret) {
+		pr_info("Failed to initialise from firmware\n");
+		return ret;
+	}
+
+	return srat_disabled() ? -EINVAL : 0;
+}
+#else
+static int __init arch_acpi_numa_init(void)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
+/**
+ * arch_numa_init() - Initialize NUMA
+ *
+ * Try each configured NUMA initialization method until one succeeds. The
+ * last fallback is dummy single node config encompassing whole memory.
+ */
+void __init arch_numa_init(void)
+{
+	if (!numa_off) {
+		if (!acpi_disabled && !numa_init(arch_acpi_numa_init))
+			return;
+		if (acpi_disabled && !numa_init(of_numa_init))
+			return;
+	}
+
+	numa_init(dummy_numa_init);
+}