diff options
author | Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> | 2019-01-22 11:42:24 +0200 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2019-01-23 15:52:15 +0000 |
commit | a2d21848d9211dad5e786aa7368709ca8938834e (patch) | |
tree | 5fdba49cc44ebfa75bea56581e8ffa56196a22b4 /drivers/base | |
parent | bfeffd155283772bbe78c6a05dec7c0128ee500c (diff) | |
download | linux-a2d21848d9211dad5e786aa7368709ca8938834e.tar.bz2 |
regmap: regmap-irq: Add main status register support
There is bunch of devices with multiple logical blocks which
can generate interrupts. It's not a rare case that the interrupt
reason registers are arranged so that there is own status/ack/mask
register for each logical block. In some devices there is also a
'main interrupt register(s)' which can indicate what sub blocks
have interrupts pending.
When such a device is connected via slow bus like i2c the main
part of interrupt handling latency can be caused by bus accesses.
On systems where it is expected that only one (or few) sub blocks
have active interrupts we can reduce the latency by only reading
the main register and those sub registers which have active
interrupts. Support this with regmap-irq for simple cases where
main register does not require acking or masking.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/base')
-rw-r--r-- | drivers/base/regmap/regmap-irq.c | 99 |
1 files changed, 95 insertions, 4 deletions
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c index 1bd1145ad8b5..22778e9501ff 100644 --- a/drivers/base/regmap/regmap-irq.c +++ b/drivers/base/regmap/regmap-irq.c @@ -35,6 +35,7 @@ struct regmap_irq_chip_data { int wake_count; void *status_reg_buf; + unsigned int *main_status_buf; unsigned int *status_buf; unsigned int *mask_buf; unsigned int *mask_buf_def; @@ -326,6 +327,33 @@ static const struct irq_chip regmap_irq_chip = { .irq_set_wake = regmap_irq_set_wake, }; +static inline int read_sub_irq_data(struct regmap_irq_chip_data *data, + unsigned int b) +{ + const struct regmap_irq_chip *chip = data->chip; + struct regmap *map = data->map; + struct regmap_irq_sub_irq_map *subreg; + int i, ret = 0; + + if (!chip->sub_reg_offsets) { + /* Assume linear mapping */ + ret = regmap_read(map, chip->status_base + + (b * map->reg_stride * data->irq_reg_stride), + &data->status_buf[b]); + } else { + subreg = &chip->sub_reg_offsets[b]; + for (i = 0; i < subreg->num_regs; i++) { + unsigned int offset = subreg->offset[i]; + + ret = regmap_read(map, chip->status_base + offset, + &data->status_buf[offset]); + if (ret) + break; + } + } + return ret; +} + static irqreturn_t regmap_irq_thread(int irq, void *d) { struct regmap_irq_chip_data *data = d; @@ -349,11 +377,65 @@ static irqreturn_t regmap_irq_thread(int irq, void *d) } /* - * Read in the statuses, using a single bulk read if possible - * in order to reduce the I/O overheads. + * Read only registers with active IRQs if the chip has 'main status + * register'. Else read in the statuses, using a single bulk read if + * possible in order to reduce the I/O overheads. */ - if (!map->use_single_read && map->reg_stride == 1 && - data->irq_reg_stride == 1) { + + if (chip->num_main_regs) { + unsigned int max_main_bits; + unsigned long size; + + size = chip->num_regs * sizeof(unsigned int); + + max_main_bits = (chip->num_main_status_bits) ? + chip->num_main_status_bits : chip->num_regs; + /* Clear the status buf as we don't read all status regs */ + memset(data->status_buf, 0, size); + + /* We could support bulk read for main status registers + * but I don't expect to see devices with really many main + * status registers so let's only support single reads for the + * sake of simplicity. and add bulk reads only if needed + */ + for (i = 0; i < chip->num_main_regs; i++) { + ret = regmap_read(map, chip->main_status + + (i * map->reg_stride + * data->irq_reg_stride), + &data->main_status_buf[i]); + if (ret) { + dev_err(map->dev, + "Failed to read IRQ status %d\n", + ret); + goto exit; + } + } + + /* Read sub registers with active IRQs */ + for (i = 0; i < chip->num_main_regs; i++) { + unsigned int b; + const unsigned long mreg = data->main_status_buf[i]; + + for_each_set_bit(b, &mreg, map->format.val_bytes * 8) { + if (i * map->format.val_bytes * 8 + b > + max_main_bits) + break; + ret = read_sub_irq_data(data, b); + + if (ret != 0) { + dev_err(map->dev, + "Failed to read IRQ status %d\n", + ret); + if (chip->runtime_pm) + pm_runtime_put(map->dev); + goto exit; + } + } + + } + } else if (!map->use_single_read && map->reg_stride == 1 && + data->irq_reg_stride == 1) { + u8 *buf8 = data->status_reg_buf; u16 *buf16 = data->status_reg_buf; u32 *buf32 = data->status_reg_buf; @@ -518,6 +600,15 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, if (!d) return -ENOMEM; + if (chip->num_main_regs) { + d->main_status_buf = kcalloc(chip->num_main_regs, + sizeof(unsigned int), + GFP_KERNEL); + + if (!d->main_status_buf) + goto err_alloc; + } + d->status_buf = kcalloc(chip->num_regs, sizeof(unsigned int), GFP_KERNEL); if (!d->status_buf) |