diff options
| author | David Woodhouse <dwmw2@infradead.org> | 2015-09-16 12:35:00 +0100 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2015-09-17 21:29:07 -0700 |
| commit | ce816eb064c82ab96276969971a561db78e66164 (patch) | |
| tree | 5e0772130f54bfb80174120cabb52b5318ea395d /drivers/atm | |
| parent | 88c796640eac36209efabe5e42b7b47dee58603e (diff) | |
| download | linux-ce816eb064c82ab96276969971a561db78e66164.tar.bz2 | |
solos-pci: Increase headroom on received packets
A comment in include/linux/skbuff.h says that:
* Various parts of the networking layer expect at least 32 bytes of
* headroom, you should not reduce this.
This was demonstrated by a panic when handling fragmented IPv6 packets:
http://marc.info/?l=linux-netdev&m=144236093519172&w=2
It's not entirely clear if that comment is still valid — and if it is,
perhaps netif_rx() ought to be enforcing it with a warning.
But either way, it is rather stupid from a performance point of view
for us to be receiving packets into a buffer which doesn't have enough
room to prepend an Ethernet header — it means that *every* incoming
packet is going to be need to be reallocated. So let's fix that.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/atm')
| -rw-r--r-- | drivers/atm/solos-pci.c | 12 |
1 files changed, 10 insertions, 2 deletions
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 74e18b0a6d89..3d7fb6516f74 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -805,7 +805,12 @@ static void solos_bh(unsigned long card_arg) continue; } - skb = alloc_skb(size + 1, GFP_ATOMIC); + /* Use netdev_alloc_skb() because it adds NET_SKB_PAD of + * headroom, and ensures we can route packets back out an + * Ethernet interface (for example) without having to + * reallocate. Adding NET_IP_ALIGN also ensures that both + * PPPoATM and PPPoEoBR2684 packets end up aligned. */ + skb = netdev_alloc_skb_ip_align(NULL, size + 1); if (!skb) { if (net_ratelimit()) dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n"); @@ -869,7 +874,10 @@ static void solos_bh(unsigned long card_arg) /* Allocate RX skbs for any ports which need them */ if (card->using_dma && card->atmdev[port] && !card->rx_skb[port]) { - struct sk_buff *skb = alloc_skb(RX_DMA_SIZE, GFP_ATOMIC); + /* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN + * here; the FPGA can only DMA to addresses which are + * aligned to 4 bytes. */ + struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE); if (skb) { SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, skb->data, |