Merge branch 'linus' into sched/core

Resolve cherry-picking conflicts:

Conflicts:
	mm/huge_memory.c
	mm/memory.c
	mm/mprotect.c

See this upstream merge commit for more details:

  52469b4fcd4f Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Signed-off-by: Ingo Molnar <mingo@kernel.org>

8 files changed, 15 insertions, 28 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9d715ae5ff6b..8e28f923cf7f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1343,7 +1343,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
 		host->flags |= ATA_HOST_PARALLEL_SCAN;
 	else
-		printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+		dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n");
 
 	if (pi.flags & ATA_FLAG_EM)
 		ahci_reset_em(host);
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 2daaee05cab1..7d3b85385bfc 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -184,7 +184,7 @@ static int ahci_probe(struct platform_device *pdev)
 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
 		host->flags |= ATA_HOST_PARALLEL_SCAN;
 	else
-		printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+		dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
 
 	if (pi.flags & ATA_FLAG_EM)
 		ahci_reset_em(host);
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index acfd0f711069..aaac4fb0d564 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -778,8 +778,16 @@ static void ahci_start_port(struct ata_port *ap)
 				rc = ap->ops->transmit_led_message(ap,
 							       emp->led_state,
 							       4);
+				/*
+				 * If busy, give a breather but do not
+				 * release EH ownership by using msleep()
+				 * instead of ata_msleep().  EM Transmit
+				 * bit is busy for the whole host and
+				 * releasing ownership will cause other
+				 * ports to fail the same way.
+				 */
 				if (rc == -EBUSY)
-					ata_msleep(ap, 1);
+					msleep(1);
 				else
 					break;
 			}
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 4ba8b0405572..ab714d2ad978 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -1035,17 +1035,3 @@ void ata_acpi_on_disable(struct ata_device *dev)
 {
 	ata_acpi_clear_gtf(dev);
 }
-
-void ata_scsi_acpi_bind(struct ata_device *dev)
-{
-	acpi_handle handle = ata_dev_acpi_handle(dev);
-	if (handle)
-		acpi_dev_pm_add_dependent(handle, &dev->sdev->sdev_gendev);
-}
-
-void ata_scsi_acpi_unbind(struct ata_device *dev)
-{
-	acpi_handle handle = ata_dev_acpi_handle(dev);
-	if (handle)
-		acpi_dev_pm_remove_dependent(handle, &dev->sdev->sdev_gendev);
-}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index c69fcce505c0..370462fa8e01 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1322,14 +1322,14 @@ void ata_eh_qc_complete(struct ata_queued_cmd *qc)
  *	should be retried.  To be used from EH.
  *
  *	SCSI midlayer limits the number of retries to scmd->allowed.
- *	scmd->retries is decremented for commands which get retried
+ *	scmd->allowed is incremented for commands which get retried
  *	due to unrelated failures (qc->err_mask is zero).
  */
 void ata_eh_qc_retry(struct ata_queued_cmd *qc)
 {
 	struct scsi_cmnd *scmd = qc->scsicmd;
-	if (!qc->err_mask && scmd->retries)
-		scmd->retries--;
+	if (!qc->err_mask)
+		scmd->allowed++;
 	__ata_eh_qc_complete(qc);
 }
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 97a0cef12959..db6dfcfa3e2e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3679,7 +3679,6 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
 			if (!IS_ERR(sdev)) {
 				dev->sdev = sdev;
 				scsi_device_put(sdev);
-				ata_scsi_acpi_bind(dev);
 			} else {
 				dev->sdev = NULL;
 			}
@@ -3767,8 +3766,6 @@ static void ata_scsi_remove_dev(struct ata_device *dev)
 	struct scsi_device *sdev;
 	unsigned long flags;
 
-	ata_scsi_acpi_unbind(dev);
-
 	/* Alas, we need to grab scan_mutex to ensure SCSI device
 	 * state doesn't change underneath us and thus
 	 * scsi_device_get() always succeeds.  The mutex locking can
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index eeeb77845d48..45b5ab3a95d5 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -121,8 +121,6 @@ extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
 extern void ata_acpi_bind_port(struct ata_port *ap);
 extern void ata_acpi_bind_dev(struct ata_device *dev);
 extern acpi_handle ata_dev_acpi_handle(struct ata_device *dev);
-extern void ata_scsi_acpi_bind(struct ata_device *dev);
-extern void ata_scsi_acpi_unbind(struct ata_device *dev);
 #else
 static inline void ata_acpi_dissociate(struct ata_host *host) { }
 static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
@@ -133,8 +131,6 @@ static inline void ata_acpi_set_state(struct ata_port *ap,
 				      pm_message_t state) { }
 static inline void ata_acpi_bind_port(struct ata_port *ap) {}
 static inline void ata_acpi_bind_dev(struct ata_device *dev) {}
-static inline void ata_scsi_acpi_bind(struct ata_device *dev) {}
-static inline void ata_scsi_acpi_unbind(struct ata_device *dev) {}
 #endif
 
 /* libata-scsi.c */
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 4bceb8803a10..b33d1f99b3a4 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -78,7 +78,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 
 	ap->ioaddr.cmd_addr = cmd_addr;
 
-	if (pnp_port_valid(idev, 1) == 0) {
+	if (pnp_port_valid(idev, 1)) {
 		ctl_addr = devm_ioport_map(&idev->dev,
 					   pnp_port_start(idev, 1), 1);
 		ap->ioaddr.altstatus_addr = ctl_addr;