diff options
| author | Sergei Shtylyov <sshtylyov@ru.mvista.com> | 2007-08-10 21:02:15 +0400 |
|---|---|---|
| committer | Jeff Garzik <jeff@garzik.org> | 2007-08-15 04:19:07 -0400 |
| commit | 80b8987c8feaf07a070f7cdcd55db024e9e200ec (patch) | |
| tree | 8b279f1c71ed954b9a3d32036b6a1078899f14fc /drivers/ata/pata_hpt37x.c | |
| parent | d44a65f7bb0dae0bcc78de336b55a75b30ec2d2a (diff) | |
| download | linux-80b8987c8feaf07a070f7cdcd55db024e9e200ec.tar.bz2 | |
pata_hpt{37x|3x2n}: fix clock reporting (take 2)
Fix several inconsistencies in these drivers WRT reporting the clocks:
- when using DPLL mode, 'pata_hpt37x' driver reported the DPLL frequency as the
PCI clock -- make it properly report both clocks and add the same ability to
the 'pata_hpt3x2n' driver;
- both drivers sometimes use "pata_hpt3*:" and sometimes "hpt3*:" in the
messages -- make them use only the former one;
- the message about failed DPLL stablizatios deserves KERN_ERR and a bang. :-)
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
| -rw-r--r-- | drivers/ata/pata_hpt37x.c | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 96bbe7c39bee..c5ddd937dbf2 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.8" +#define DRV_VERSION "0.6.9" struct hpt_clock { u8 xfer_speed; @@ -1112,7 +1112,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); } if (adjust == 8) { - printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n"); + printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n"); return -ENODEV; } if (dpll == 3) @@ -1120,7 +1120,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) else private_data = (void *)hpt37x_timings_50; - printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[dpll]); + printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n", + MHz[clock_slot], MHz[dpll]); } else { private_data = (void *)chip_table->clocks[clock_slot]; /* @@ -1133,7 +1134,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) port = &info_hpt370_33; if (clock_slot < 2 && port == &info_hpt370a) port = &info_hpt370a_33; - printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]); + printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n", + chip_table->name, MHz[clock_slot]); } /* Now kick off ATA set up */ |